Micro-Swiss - Buying Guide
Last Updated: 05/04/2024
Share on
Bestselling from Micro-Swiss on Amazon
- Micro Swiss FlowTech Hotend for Creality K1 and Older K1 Max - Leakproof Nozzle - Cold Nozzle Change...
- Micro-Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Print...
- Micro Swiss Heatsink for Creality Ender 3 V3 KE and Ender 3 V3 SE
- Micro Swiss Plated Wear Resistant High Flow Volcano Compatible/Artillery Sidewinder 1.75mm Nozzles (.4mm)
- Micro Swiss Bowden Dual Gear Extruder Compatible with Creality Ender, CR10, CR-10 Pro, CR-10S, CR6-S...
- Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Drop in Upgrade, No mod...
- Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech Hotend (0.4mm)
- Micro Swiss MK7/MK8/MK9 Silicone Socks for CR10 / Ender 3 / ANET A8 Printers (Pack of 3)
- Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Build...
- Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality, CR10, Ende...
- Micro Swiss NG Direct Drive Extruder for Creality Ender 5/5 Pro / 5 Plus (Drop in Upgrade, No modif...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Micro Swiss FlowTech Hotend for Creality K1 and Older K1 Max - Leakproof Nozzle - Cold Nozzle Change - High Flow - All Metal Design
Asin: B0CN3PP5X1 | Ean: 0850041631202 | UPC: 850041631202
Cold Nozzle Change: Swapping Out Nozzles Used To Be A Time-Consuming And Potentially Hazardous Task. With A Flowtech Hotend, Nozzle Changes Are Effortless, And There's No Need For Hot Tightening, And You Can Do It With Just One Hand..
All-Metal Design: Built To Last! Flowtech Hotend Features An All-Metal Design That Can Handle Most Modern 3D Printing Filaments. The Entire Hotend Is Machined And Assembled In-House, With Quality Control Performed At Multiple Stages During The Manufacturing Process. At The End, Each Hotend Undergoes A Full Thermal Cycling Test Before It Is Packaged..
High-Flow Characteristics: Ceramic Cylindrical Heater And 28.6Mm Melt Zone Provides Excellent Volumetric Flow Rate..
Leak-Proof Nozzle: Tired Of Messy Nozzle Leaks That Ruin Your Prints And Waste Filament? Flowtech Hotend Combines Nozzle And Thermal Break Into One Permanently Sealed Assembly That Ensures A Leak-Proof Hotend..
Features
- Drop-in upgrade: FlowTech hotend is designed to be an easy drop-in upgrade for each 3D printer model. This edition is designed for Hotend for Creality K1 and Older K1 Max. Stock z-height, build volume and firmware remains unchanged.
- Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
- Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
- High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
- All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
See On Amazon #2
Micro-Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm
Asin: B0789V2D7C | Model: M2583-04 | PartNumber: M2583-04 | Ean: 7432114996901
Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant Mk8 .4Mm Nozzle, Silicone Sock.
Made In Usa By Micro Swiss.
This Is A Drop In All Metal Conversion Kit For Creality Printers.
Nozzle Size: 0.4Mm.
Features
- Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 / TronXY X5S
- Nozzle size: 0.4mm
- Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
- This is a Drop in All Metal Conversion Kit for Creality printers
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Weight: 0.13 Pounds
See On Amazon #3
Micro Swiss Heatsink for Creality Ender 3 V3 KE and Ender 3 V3 SE
Asin: B0CW6P2QWR | Model: M3027 | PartNumber: M3027 | Ean: 0769407528660 | UPC: 769407528660
1X M4 Set Screw.
1X Aluminum Heatsink.
Features
- Compatible with both stock and Micro Swiss FlowTech hotends.
- 1x Aluminum Heatsink
- 1x M4 Set Screw
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #4
Micro Swiss Plated Wear Resistant High Flow Volcano Compatible/Artillery Sidewinder 1.75mm Nozzles (.4mm)
Asin: B01LZBMOE2 | Model: M2555-04 | PartNumber: M2555-04 | Ean: 7432114396305, 0814358017142 | UPC: 814358017142
For 1.75Mm Filament.
Made In Usa By Micro Swiss.
Orifice Size: .4Mm.
Plated With Twinclad Xt High Lubricity Wear Resistant Coating.
Features
- Fits: Anycubic Kobra / Anycubic Kobra Max / Anycubic Kobra Plus / Anycubic Vyper / Artillery Genius Pro / Artillery Sidewinder X1 / Artillery Sidewinder X2 / Volcano 1.75mm / FLSUN Super Racer / FOKOOS Odin-5 F3 / Lulzbot TAZ MOARstruder / Tevo Little Monster
- Plated with TwinClad XT HIGH LUBRICITY WEAR RESISTANT Coating
- For 1.75mm Filament
- Orifice size: .4mm
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #5
Micro Swiss Bowden Dual Gear Extruder Compatible with Creality Ender, CR10, CR-10 Pro, CR-10S, CR6-SE, Tornado
Asin: B09K1CNP6L | Model: M2714 | PartNumber: M2714 | Ean: 0769407528066 | UPC: 769407528066
Made In Usa By Micro Swiss.
Fits: Ender 3, 5, 6, Cr10, Cr-10S Pro, Cr-10S, Cr6-Se, Tornado.
Features
- Fits: Bowden extruder machines, Fits NEMA 17 size stepper motors
- Fits: Ender 3, 5, 6, CR10, CR-10s Pro, CR-10S, CR6-SE, Tornado
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 1.40 x 3.50 x 2.50 Inches
See On Amazon #6
Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Drop in Upgrade, No modifican Required)
Asin: B0B1QPVR3X | Model: M3201 | PartNumber: M3201 | Ean: 0850041631004 | UPC: 850041631004
This Kit Comes With Everything You Need To Upgrade Your Printer To A Direct Drive Extruder. It Comes With 1X Master Extruder Assembly 1X Adaptation Plate 1X Stepper Motor 1X Fan Shroud 1X Custom Extension Cable 1X Hotend Assembly And Hardware Kit..
It Is Made In The Usa By Micro Swiss In-House..
This Extruder Overcomes The Shortcomings Of All Current Counterparts On The Market, To Create An Optimal Printing Experience For Everyone. With The Bevel Gear Design, We Are Able To Achieve The Industry Shortest Filament Path (Less Than 41Mm). The Unique Motor Placement Allows For Highly Compact, Low Overhang Design. This Further Increases System Rigidity..
High Torque: 3:1 Gear Ratio.
Features
- Drop in Direct Drive Extruder for CR-10 and Ender 3 Series. It is Fully Compatible with Creality CR-10 / CR-10s / Ender 3 / Ender 3 Pro / Ender 3 V2
- High Torque: 3:1 Gear ratio
- This kit comes with everything you need to upgrade your printer to a Direct Drive Extruder. It comes with 1x Master Extruder Assembly 1x Adaptation plate 1x Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Hotend assembly and hardware kit.
- This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.
- It is made in the USA by Micro Swiss in-house.
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Dimensions: 2.62 x 4.75 x 4.75 inches
See On Amazon #7
Micro Swiss MK7/MK8/MK9 Silicone Socks for CR10 / Ender 3 / ANET A8 Printers (Pack of 3)
Asin: B07K8SJND5 | Model: M2588 | PartNumber: M2588 | Ean: 0769407527359 | UPC: 769407527359
Helps To Keep The Hotend Temperature Stable.
Pack Of 3.
Fits: Creality Cr-10 / Cr-10S / Cr-10-S5 / Cr-10 Mini / Cr-10-S4 / Ender-2 / Tronxy X5s / Mk7, Mk8, Mk9 Hotends.
Features
- Heat-resistant, Non-stick Silicone Material
- Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender-2 / TronXY X5S / MK7, MK8, MK9 Hotends
- Helps to keep the hotend temperature stable
- Pack of 3
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
See On Amazon #8
Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Builder 3D Printer (.4mm)
Asin: B07F457WBV | Model: M2586-04 | PartNumber: M2586-04 | Ean: 7432114996994
Plated With Twinclad Xt Coating.
Made In Usa By Micro Swiss.
Nozzle Size: .4Mm.
Features
- Fits: Dremel Digilab 3D45
- Nozzle size: .4mm
- Plated with TwinClad XT Coating
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Dimensions: 3.94 x 3.15 x 12.99 Inches
See On Amazon #9
Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality, CR10, Ender 3, Ender 5, Tevo Tornado) .4mm
Asin: B07DJY52CC | Model: M2585-04 | PartNumber: M2585-04 | Ean: 7432114996970
1.75Mm Filament.
Made In Usa By Micro Swiss.
Orifice Size: .4Mm.
Fits: Mk8 Extruders, Creality Cr-10, Tevo Tornado, Makerbot, Craftbot, Bq Witbox.
Features
- A2 Hardened Tool Steel Plated with TwinClad XT
- Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox
- 1.75mm Filament
- Orifice size: .4mm
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro-Swiss
See On Amazon #10
Micro Swiss NG Direct Drive Extruder for Creality Ender 5/5 Pro / 5 Plus (Drop in Upgrade, No modifican Required)
Asin: B0BKQVT2D9 | Model: M3202 | PartNumber: M3202 | Ean: 0850041631011 | UPC: 850041631011
This Kit Comes With Everything You Need To Upgrade Your Printer To A Direct Drive Extruder. It Comes With 1X Master Extruder Assembly 1X Adaptation Plate 1X Stepper Motor 1X Fan Shroud 1X Custom Extension Cable 1X Hotend Assembly And Hardware Kit..
It Is Made In The Usa By Micro Swiss In-House..
This Extruder Overcomes The Shortcomings Of All Current Counterparts On The Market, To Create An Optimal Printing Experience For Everyone. With The Bevel Gear Design, We Are Able To Achieve The Industry Shortest Filament Path (Less Than 41Mm). The Unique Motor Placement Allows For Highly Compact, Low Overhang Design. This Further Increases System Rigidity..
High Torque: 3:1 Gear Ratio.
Features
- Drop in Direct Drive Extruder Ender 5 Series. It is Fully Compatible with Creality Ender 5 / Ender 5 Pro / Ender 5 Plus 3D Printers.
- High Torque: 3:1 Gear ratio
- This kit comes with everything you need to upgrade your printer to a Direct Drive Extruder. It comes with 1x Master Extruder Assembly 1x Adaptation plate 1x Stepper motor 1x Fan Shroud 1x Custom extension cable 1x Hotend assembly and hardware kit.
- This extruder overcomes the shortcomings of all current counterparts on the market, to create an optimal printing experience for everyone. With the Bevel Gear design, we are able to achieve the industry shortest filament path (less than 41mm). The unique motor placement allows for highly compact, low overhang design. This further increases system rigidity.
- It is made in the USA by Micro Swiss in-house.
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #11
Micro Swiss MK8 Plated M2 Hardened High Speed Steel Nozzle (.4mm)
Asin: B08NYWRNGJ | Model: M2500 | PartNumber: M2500 | Ean: 0769407527724 | UPC: 769407527724
Nozzle Size: 0.4Mm.
Made In Usa By Micro Swiss.
Limited Lifetime Warranty Against Wear.
Fits: Mk8 Extruders, Creality, Tevo Tornado, Makerbot, Craftbot, Bq Witbox.
Features
- M2 Hardened High Speed Steel with Electroless Nickel plating and WS2 Coating
- Fits: MK8 Extruders, Creality, Tevo Tornado, MakerBot, CraftBot, BQ Witbox
- Nozzle size: 0.4mm
- Limited lifetime warranty against wear
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 0.50 x 0.28 x 0.28 Inches
See On Amazon #12
Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers
Asin: B08CGN18KJ | Model: M2601 | PartNumber: M2601 | Ean: 0769407527656 | UPC: 769407527656
Filament Size: 1.75Mm.
Made In Usa By Micro Swiss.
Nozzle Size: .4Mm.
Features
- Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro
- Nozzle size: .4mm
- Filament size: 1.75mm
- Made in USA by Micro Swiss
- See more on Amazon...
First Available: 08/10/2020
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #13
Micro Swiss Heater Block Upgrade with Silicone Sock for CR10 / Ender 2 / Ender 3 / ANET A8 Printers MK7, MK8, MK9 Hotends
Asin: B07HJFDDJZ | Model: M2587 | PartNumber: M2587 | Ean: 0769407527342 | UPC: 769407527342
Material: Aluminum.
Made In Usa By Micro Swiss.
Heater Block Dimensions: 20Mm X 20Mm X 10Mm.
Features
- Fits: CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender-2 / TronXY X5S / MK7, MK8, MK9 Hotends
- Heater Block dimensions: 20mm x 20mm x 10mm
- Material: Aluminum
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
See On Amazon #14
Micro Swiss Direct Drive Upgrade Kit for Creality Ender 5
Asin: B08PKR9PPQ | Model: M2603 | PartNumber: M2603 | Ean: 0769407527700, 4251102638486 | UPC: 769407527700
Filament Size: 1.75Mm.
Made In Usa By Micro Swiss.
Orifice Size: .4Mm.
Features
- Fits: Ender 5 / Ender 5 Pro / Ender 5 Plus
- Orifice size: .4mm
- Filament size: 1.75mm
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 1.50 x 6.25 x 3.25 Inches
See On Amazon #15
Micro Swiss NG Direct Drive Extruder for Creality CR-10 V2 / V3
Asin: B0C24LMZQ6 | Model: M3206 | PartNumber: M3206 | Ean: 0850041631059 | UPC: 850041631059
Adaptable To Wide Range Of 3D Printers.
Made In Usa By Micro Swiss.
Integrated With A Micro Swiss All Metal Hotend.
3:1 Gear Ratio.
Features
- Fits: CR-10 V2 / CR-10 V3
- 3:1 Gear ratio
- Adaptable to wide range of 3D Printers
- Integrated with a Micro Swiss All Metal Hotend
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #16
Micro Swiss Plated Copper High Temperature MK8 Heater Block Upgrade for CR10 / Ender/ANET A8 Printers MK7, MK8, MK9 Hotends
Asin: B09NNLYFB5 | Model: M2802 | PartNumber: M2802 | Ean: 0769407528073 | UPC: 769407528073
Material: Plated Copper.
Made In Usa By Micro Swiss.
For High Temperature Application.
Block Dimensions: 21Mm X 20Mm X 10Mm.
Features
- Fits: CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender-2 / MK7, MK8, MK9 Hotends
- Block dimensions: 21mm x 20mm x 10mm
- Material: Plated Copper
- For high temperature application
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
See On Amazon #17
Micro-Swiss HW-NOZ-MK8-04 Plated Brass Wear Resistant Nozzles, 1.75 mm, MK8 (Makerbot) 0.4 mm, Bright Nickel
Asin: B01BDL4MXA | Model: HW-NOZ-MK8-04 | PartNumber: HW-NOZ-MK8-04 | Ean: 0640970862279 | UPC: 640970862279
Fit A Large Variety Of Machines, Check Listing Name Carefully To Make Sure It Fits Your Printer, Or Get In Touch With Us If You Are Unsure..
Package Dimensions: 3" L X 2" W X 0.5" H.
Ultra-Hard Coating Creates A Low Friction Nozzle That Outlasts Uncoated Brass. Brass Base Material Retains Thermal Conductivity For Unchanged Thermal Performance..
Features
- USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.
- Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
- Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
- Package Dimensions: 3 L x 2 W x 0.5 H
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 0.50 x 3.00 x 2.00 Inches | Weight: 0.00 Pounds
See On Amazon #18
Micro Swiss CM2 RepRap V5-V6 1.75 Nozzle for Prusa i3 MK2 / MK2S / MK3 / Mini - Copper Core - M2 Hardened Steel Tip - Superior Thermal Performance - Exceptional Wear Resistance (.4mm)
Asin: B0CCF79FW3 | Model: M2902 | PartNumber: M2902 | Ean: 0850041631127 | UPC: 850041631127
Plating: Nozzle Is Plated With Electroless Nickel Plating. The M2 Hardened High Speed Steel Insert Is Plated With A Electroless Nickel Plating And Coated With Nonstick Nano Ws2 Coating..
Quality: Made In Usa By Micro Swiss. This Nozzle Comes With Limited Lifetime Warranty Against Wear!.
Any Filament: Works With Most Fdm Printing Materials Such As Pla/Abs/Petg/Tpu..
Material: Nozzle Is An Ideal Nozzle For All Applications. Core Of The Nozzle Is Made Of High-Temperature Copper Chromium Zirconium And Plated With An Electroless Nickel Plating. This Special Alloy Retains Its Strength At Much Higher Temperatures Compared To A Regular Copper Alloy. The Tip Of The Nozzle Is Made Of M2 Hardened High Speed Steel And Coated With A Special Nonstick Nano Coating..
Features
- FITMENT: All printers with a E3D V4 / V5 / V6 1.75 Hotend / Prusa i3 MK2 / MK2S / MK3 / Mini
- MATERIAL: Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
- PLATING: Nozzle is plated with Electroless Nickel Plating. The M2 Hardened High Speed Steel insert is Plated with a Electroless Nickel Plating and Coated with nonstick nano WS2 coating.
- ANY FILAMENT: Works with most FDM printing materials such as PLA/ABS/PETG/TPU.
- QUALITY: MADE IN USA by Micro Swiss. This nozzle comes with Limited lifetime warranty against wear!
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 3.00 x 2.00 x 0.30 Inches
See On Amazon #19
Micro Swiss All Metal Hotend Kit (for CR-10s PRO/CR-10 Max/Ender 3 V2 Neo)
Asin: B07NDL3PNX | Model: M2591-04 | PartNumber: M2591-04 | Ean: 0769407527397 | UPC: 769407527397
The Thermal Heat Break Is Made From Grade 5 Titanium Alloy To Provide Excellent Thermal Isolation Between The Heater And The Cooling Block. Titanium Is Extremely Strong Material And Offers Almost 3X Lower Thermal Conductivity Than Stainless Steel, Creating More Defined Meltzone..
Fits: Cr-10S Pro, Cr-10S Pro V2, Cr-10 Max.
Our Uniquely Designed Cooling Block Eliminates Need For A Thermal Tube. By Not Having A Separate Thermal Tube Inside The Cooling Block, It Allows For Faster Heat Dissipation..
Features
- This is a drop in All Metal Conversion kit for the CR-10s Pro printers. It requires absolutely zero modification to your printer to install.
- Our uniquely designed cooling block eliminates need for a thermal tube. By not having a separate thermal tube inside the cooling block, it allows for faster heat dissipation.
- The thermal heat break is made from Grade 5 Titanium Alloy to provide excellent thermal isolation between the heater and the cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.
- Fits: CR-10s Pro, CR-10s Pro V2, CR-10 Max
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 1.38 x 3.54 x 2.56 inches
See On Amazon #20
Micro Swiss Plated Copper High Temperature MK10 Heater Block Upgrade (M7 Threads)
Asin: B0C6RCNSWV | Ean: 0769407528431 | UPC: 769407528431
Material: Plated Copper.
Made In Usa By Micro Swiss.
For High Temperature Applications.
Block Dimensions: 20Mm X 20Mm X 13Mm.
Features
- Fits: MK10 Hotends / Micro Swiss MK10 Hotends / FlashForge Creator Pro / FlashForge Creator X / FlashForge Dreamer / QIDI TECH ONE / Dremel 3D20 / PowerSpec 3D Pro / PowerSpec 3D X / PowerSpec Ultra 3D Printer / Wanhao Duplicator 4S / Wanhao Duplicator 4X / Wanhao Duplicator 9 (D9) / Wanhao i3 / Monoprice Maker Select 3D Printer v2 / Cocoon Create 3D Print /
- Block dimensions: 20mm x 20mm x 13mm
- Material: Plated Copper
- For high temperature applications
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
See On Amazon #21
Micro Swiss CM2 HighFlow Volcano 1.75 Nozzle for Artillery Sidewinder/Anycubic/FLSUN - Copper Core - M2 Hardened Steel Tip - Superior Thermal Performance - Exceptional Wear Resistance (1.0mm)
Asin: B0CCFF5WXR | Model: M2903 | PartNumber: M2903 | Ean: 0850041631196 | UPC: 850041631196
Plating: Nozzle Is Plated With Electroless Nickel Plating. The M2 Hardened High Speed Steel Insert Is Plated With A Electroless Nickel Plating And Coated With Nonstick Nano Ws2 Coating..
Quality: Made In Usa By Micro Swiss. This Nozzle Comes With Limited Lifetime Warranty Against Wear!.
Any Filament: Works With Most Fdm Printing Materials Such As Pla/Abs/Petg/Tpu..
Material: Nozzle Is An Ideal Nozzle For All Applications. Core Of The Nozzle Is Made Of High-Temperature Copper Chromium Zirconium And Plated With An Electroless Nickel Plating. This Special Alloy Retains Its Strength At Much Higher Temperatures Compared To A Regular Copper Alloy. The Tip Of The Nozzle Is Made Of M2 Hardened High Speed Steel And Coated With A Special Nonstick Nano Coating..
Features
- FITMENT: Anycubic Kobra / Anycubic Kobra Max / Anycubic Kobra Plus / Anycubic Vyper / Artillery Genius Pro / Artillery Sidewinder X1 / Artillery Sidewinder X2 / Volcano 1.75mm / FLSUN Super Racer / FOKOOS Odin-5 F3 / Lulzbot TAZ MOARstruder / Tevo Little Monster
- MATERIAL: Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
- PLATING: Nozzle is plated with Electroless Nickel Plating. The M2 Hardened High Speed Steel insert is Plated with a Electroless Nickel Plating and Coated with nonstick nano WS2 coating.
- ANY FILAMENT: Works with most FDM printing materials such as PLA/ABS/PETG/TPU.
- QUALITY: MADE IN USA by Micro Swiss. This nozzle comes with Limited lifetime warranty against wear!
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 3.00 x 2.00 x 0.30 inches
See On Amazon #22
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4 for PLA/ABS/PETG/TPU Made in USA (.4mm)
Asin: B0CBCSXLKJ | Model: M2612 | PartNumber: M2612 | Ean: 0769407528455 | UPC: 769407528455
Plating: Nozzle Is Plated With Twinclad Xt Coating. Twinclad Xt Is A Nickel Composite Coating Designed For Very Low Friction. It Offers One Of The Lowest Coefficient Of Friction, Better Than Nickel With Ptfe Co-Deposit. The Twinclad Xt Coating Is Also Very Hard And Abrasion Resistant..
Quality: Made In Usa By Micro Swiss.
Any Filament: Works With Most Fdm Printing Materials Such As Pla/Abs/Petg/Tpu..
Material: Nozzle Is Made From A High Quality 360 Brass Base Material Offering Great Thermal Conductivity..
Features
- FITMENT: Micro Swiss nozzle compatible for Creality K1, K1 MAX, Ender 3 V3 KE, CR-10 SE, CR-M4 3D printers
- MATERIAL: Nozzle is made from a High quality 360 brass base material offering great thermal conductivity.
- PLATING: Nozzle is plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant.
- ANY FILAMENT: Works with most FDM printing materials such as PLA/ABS/PETG/TPU.
- QUALITY: MADE IN USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 3.00 x 2.00 x 0.30 inches
See On Amazon #23
Micro Swiss Plated Wear Resistant Nozzle for Creality CR-10S Pro/CR-10 MAX Original hotend ONLY (M6x.75mm Threads) (.4mm)
Asin: B07NF66VJ3 | Model: M2592-04 | PartNumber: M2592-04 | Ean: 0769407527403 | UPC: 769407527403
Threads: M6x.75Mm.
Made In Usa By Micro Swiss.
Plated With Twinclad Xt Coating.
Orifice Size: .4Mm.
Features
- Fits: Creality CR-10s Pro / CR-10s Pro V2 / CR-10 MAX
- Orifice size: .4mm
- Threads: M6x.75mm
- Plated with TwinClad XT Coating
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Dimensions: 0.30 x 3.00 x 2.00 inches
See On Amazon #24
Micro Swiss Plated A2 Hardened Tool Steel Nozzle for MK10 All Metal Hotend Kit ONLY (.4mm)
Asin: B01LOYTH86 | Model: M2558-04 | PartNumber: M2558-04 | Ean: 7432114196172
Plated With Twinclad Xt Coating.
Made In Usa By Micro Swiss.
Nozzle Size: 0.4Mm.
A2 Hardened Tool Steel.
Features
- Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads)
- A2 Hardened Tool Steel
- Plated with TwinClad XT Coating
- Nozzle Size: 0.4mm
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Weight: 0.04 Pounds
See On Amazon #25
Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle for WANHAO, FlashForge
Asin: B01C3HEQZC | Model: M2559-04 | PartNumber: M2559-04 | Ean: 0866086000200 | UPC: 866086000200
This Is A Drop In All Metal Conversion Kit For Mk10 Extruders.
Made In Usa By Micro Swiss.
Kit Includes: 1 Plated Brass Wear Resistant Nozzle / 1 Thermal Tube / 1 Thermal Compound.
Features
- Fits: FlashForge Creator Pro / FlashForge Creator X / FlashForge Dreamer / QIDI TECH I / PowerSpec 3D Pro / PowerSpec 3D X / PowerSpec Ultra 3D Printer / Wanhao Duplicator 4S / Wanhao Duplicator 4X / Wanhao i3 / Monoprice Maker Select 3D Printer v2 / Cocoon Create 3D
- Kit Includes: 1 Plated Brass Wear Resistant Nozzle / 1 Thermal tube / 1 Thermal compound
- This is a Drop in All Metal Conversion Kit for MK10 Extruders
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #26
Micro Swiss Brass Plated Wear Resistant Nozzle for Ultimaker 3 UM3 (.4mm)
Asin: B07VB5G2TL | Model: M2598-04 | PartNumber: M2598-04 | Ean: 0769407527564 | UPC: 769407527564
Plated With Twinclad Xt Coating.
Made In Usa By Micro Swiss.
Orifice Size: .4Mm.
Features
- Fits: Ultimaker 3 / Ultimaker 5s
- Orifice size: .4mm
- Plated with TwinClad XT Coating
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
Dimensions: 0.30 x 3.00 x 2.00 Inches
See On Amazon #27
Micro Swiss Silicone Sock for FlowTech Hotend (Pack of 3)
Asin: B0CW3TWYHF | Model: M3021 | PartNumber: M3021 | Ean: 0769407528509 | UPC: 769407528509
Compatible With The Micro Swiss Flowtech Hotend.
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #28
Micro Swiss Replacement MK8 Hotend Assembly, Compatible with Micro Swiss Hotends, Micro Swiss Direct Drive, Micro Swiss NG Direct Drive (.4mm)
Asin: B0CT46F1T2 | Ean: 0769407527946 | UPC: 769407527946
Made In Usa: All Micro Swiss Products Are Developed, Designed And Manufactured In The Usa. This Ensures The Highest Level Of Material Quality And High Precision Machined Parts Guaranteed To Fit Compatible Printers..
Technical & Customer Support: Reach Out To Us And Meet Our Industry Leading Customer Support Team, Along With Our Experienced 3D Printer Technicians Who Can Assist You On Any Support Questions You Have!.
What's In The Box: Micro Swiss Mk8 Brass Plated Nozzle (.4Mm) , Micro Swiss Mk8 Heater Block, Micro Swiss Titanium Thermal Break.
Features
- FITMENT: Compatible with Micro Swiss Hotends, Micro Swiss Direct Drive, and Micro Swiss NG Direct Drive ( Compatible with Micro Swiss SKUs: M2583 M2591 M2601 M2603 M2605 M2607 M3201 M3202 M3203 M3204 M3205 M3206 )
- WHAT'S IN THE BOX: Micro Swiss MK8 Brass Plated Nozzle (.4mm) , Micro Swiss MK8 Heater Block, Micro Swiss Titanium Thermal Break
- MADE IN USA: All Micro Swiss products are developed, designed and manufactured in the USA. This ensures the highest level of material quality and high precision machined parts guaranteed to fit compatible printers.
- TECHNICAL & CUSTOMER SUPPORT: Reach out to us and meet our industry leading customer support team, along with our experienced 3D Printer technicians who can assist you on any support questions you have!
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #29
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality Ender 7 / Spider Hotend (.4mm)
Asin: B0B6L4GYSW | Model: M2609-04 | PartNumber: M2609-04 | Ean: 0769407528196 | UPC: 769407528196
Plated With Twinclad Xt Coating.
Made In Usa By Micro Swiss.
Orifice Size: .4Mm.
Features
- Fits: Creality Ender 7 / Creality Spider Hotend
- Orifice size: .4mm
- Plated with TwinClad XT Coating
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss LLC
Dimensions: 5.91 x 2.76 x 15.75 Inches
See On Amazon