NEWTRY - Buying Guide

Bestselling from NEWTRY on Amazon

1. NEWTRY 3 in 1 Electric Hoist Winch 1,100lb Wireless Remote Control, Cable Remote Control, 110/120 Vo...
2. NEWTRY Automatic Rebar Tie Gun Pro 7-34mm Rebar Tier Tying Machine 0.3 -1.33 Steel Bar Tie Tool w...
3. NEWTRY 1100lbs Electric Hoist Winch with Wireless Remote Control 110/120 Volt Portable Power Electri...
4. NEWTRY Wireless Crane Remote Control 12 Buttons 12V Industrial Channel Hoist Controller Electric Lif...
5. NEWTRY Dial Torque Wrench, 0.3-3N.m Dial Indicator Torque Wrench with Sockets Set (4-14mm), Precisio...
6. NEWTRY 5PCS Rebar Tie Wires 328ft 0.8mm 280Knots for NEWTRY Orange Rebar Tie Machine
7. NEWTRY 20 ton Low Profile Hydraulic Jack Porta Power Kit + CP-180 Manual Hydraulic Hand Pump, Indust...
8. NEWTRY Wireless Crane Remote Control 8 Buttons 12V 2 Transmitters Industrial Channel Electric Lift H...
9. NEWTRY Hydraulic Ram Jack 10T Hydraulic Jack Hydraulic Porta Power Ram Lifting Cylinder Low Profile ...
10. NEWTRY Electrostatic Field Meter Static Meter 0-22KV Electrostatic Meter Tester 0-200V Static Field ...

Features

• [THREE CONTROL METHODS] 1. Manual control----convenient to operate beside the machine; 2.Newly upgraded black momentary rocker switch wired remote control----can be controlled from a distance, more durable and sensitive for the old pendant control; 3.Wireless remote control ----Used within 200ft range, can match multiple remote controllers at the same time.
• [CONVENIENCE] The electric winch can lift up to 1,100 lbs and the lifting speed is 16ft/min. We offer an additional lifting strap and fixing bracket to help users fix hoist and lifted items. Rated Volt: 110/120V ~ 60Hz | Plug: American standard plug | Max Lifting Height: 25ft.
• [SAFETY] The upper and lower hooks can be rotated 360 , and its safety buckle is designed to prevent falling. The strong galvanized steel rope makes it not easy to break. When ascending close to the limit position, the electric hoist will automatically cut off power to effectively protect itself.
• [STRONG MOTOR] A 1500W universal motor is used, which is characterized by small size and high power. This is why this 20lbs electric hoist can lift 1,100lbs quickly. But at the same time, inevitably, its sound will be a little louder and occasionally sparks. This is normal, our technicians have upgraded its cooling system to reduce this situation.
• [1 YEAR WARRANTY] Be confident with your purchase knowing that this hoist is supported 1 year warranty. If you got any problem in using this hoist, just contact us on amazon asap and we will reply you within 24 hours.
• See more on Amazon...

Features

• BASIC PARAMETERS---Input voltage: AC100-240V; Output voltage: 21V; Tying diameter range:0.3 -1.33 /7-34mm; Battery: 2000mAhX2; Times a knot: 0.8S, 38-42 knots in 1 minute; Time to fully charged: 1.5h; Wire length: 360ft per coil; Machine weight: 3.2lb.
• EFFICIENT&FAST---The rebar tie gun boasts an impressive speed of 38-42 knots per minute, with each knot taking a mere 0.8 seconds to complete. Using this tool, one machine can easily replace the work of 3-4 laborers, saving time and energy while increasing overall productivity. Upon installing the coil for the first time, it is recommended to test the knot several times to ensure proper function. If the wire is not coming out, it may indicate that the coil was not installed properly.
• POWERFUL 2000mAh BATTERY---With a 2000mAh large capacity battery that can be fully charged in just 2 hours, this rebar tie gun allows for extended periods of use without the need for constant recharging. Each battery can handle up to 3000 knots before needing to be swapped out, and the machine is equipped with two batteries to ensure uninterrupted operation. While one battery is charging, simply switch to the other battery to continue using the machine.
• 1-9 GEAR ADJUSTABLE---This rebar tying tool offers an impressive 9-gear adjustable strapping system, providing maximum flexibility and control over tying power. Each gear offers increasing levels of tying power, ranging from grade 1 to 9, to handle a wide variety of tying applications. Choose the appropriate gear based on the specific requirements of each job to ensure optimal results. Additionally, the machine is equipped with an adjustable loop control that allows you to adjust the number of knotted loops to meet the unique demands of each task.
• UPGRADED APPEARANCE DESIGN---The tier machine features a transparent head shell, which allows you to conveniently check whether the iron wire passes through the gears and whether all internal parts are functioning correctly. This feature not only provides visibility to ensure proper operation but also gives the machine a sleek and modern design.
• See more on Amazon...

Features

• SIMPLE OPERATION Not only can you manually control it, but you can also use it with a wireless remote control within 200ft. It can lift up to 1,100 lbs and the lifting speed is 16ft/min.
• CONVENIENCE We offer an additional lifting strap and fixing bracket to help users fix hoist and lifted items. Rated Volt: 110/120V ~ 60Hz | Plug: American standard plug | Max Lifting Height: 25ft
• SAFETY The upper and lower hooks can be rotated 360 , and its safety buckle is designed to prevent falling. The strong galvanized steel rope makes it not easy to break. When ascending close to the limit position, the electric hoist will automatically cut off power to effectively protect itself.
• VERSATILE USE Can be used to lift regular or irregular items such as lawn mowers, engines, stones, trees, etc. Our electric hoist can be placed vertically or horizontally in garages, ceilings, attics, barns, and attics.
• STRONG MOTOR A 1500W universal motor is used, which is characterized by small size and high power. This is why this 10lbs electric hoist can lift 1,100lbs quickly. But at the same time, inevitably, its sound will be a little louder and occasionally sparks. This is normal, our technicians have upgraded its cooling system to reduce this situation.
• See more on Amazon...

Features

• [HIGH QUALITY TRANSMITTER]: The remote control is 360 degree barrier-free with strong penetration and no need to aim. NEWTRY transmitter adopts high-performance metal contact button for durability, reaching IP65 level, performing excellently in harsh environments such as high oil pollution and humidity.
• [EXCELLENT NYLON CASE]: The wireless remote control is made of PA66 reinforced flame retardant nylon, which has strong ability to against pressure and corrosion.
• [WIDE APPLICATION]: This remote is suitable for industrial remote controllers with hook, MD, double speed electric hoist, single speed vehicle, which is less than 10 contacts.
• [KEY FUNCTION MODIFICATION]: Connecting with the copying apparatus or the bundled software opened by WIN7/XP system through the special data line (the apparatus and data line needed to purchase separately), you can set the function of keys by yourself easily.
• [Notice]: There are 12 keys in the remote control, 10 of which are operation keys, and the other two are unavailable. In addition, to facilitate your installation, we provide detailed description, a color printing instruction manual and responsible after-sales service.
• See more on Amazon...

Features

• [Replaceable Sockets & Screws ]: A set of sockets from 4 to 14 mm is provided to meet your needs for dial torque wrench in different situations. Also other sockets and sleeves are suitable for it, such as hexagon sleeve, cross sleeve, one-shaped sleeve, etc.
• [Torque Peak Memory]: When you stop applying force to the torque meter, the main needle will return to zero, and the driven needle stays still for reference. Peak memory facilitates the readout and subsequent repetitive operations, makes the operation more convenient and precise.
• [High Accuracy & Double Design]: 0.3-3N.m dial indicator torque wrench's min measurement unit is 0.03N.m, accuracy up to 3%, which can effectively avoid the error of manual estimation and enhance work efficiency. There are measurement indicators on both sides that support both clockwise and counterclockwise directions.
• [High Strength & Non-Slip]: The 1/4 drive torque wrench is made of alloy steel, with high strength and high toughness, while the handle is made of frosted technology, which has the advantage of anti-slip and makes the operation more stable.
• [Portable]: The torsion wrench weighs 2.5 lbs, measures 12'' x 1.6'' x 1.2 . It s allowed to be used in tight places. Also, the package includes a portable tool kit, you can easily store and carry it.
• See more on Amazon...

Features

• This wire coil is only suitable for NEWTRY orange rebar tier machine and the ASIN is B0B8C2FDL8. The quality of the ties not only affects the stability of the machine, but also affects the service life of the machine. Our ties are specially equipped for machine production and have strict standards.
• Will not lose zinc powder---Our ties have a strict galvanizing process, and the zinc powder will not fall off even after long time use. The zinc power will easily stick to the gears and internal parts of the machine, causing clogging and wire failure, thus damaging the machine.
• The diameter is important---The diameter of our wire ties is strictly standardized. The diameter of our tie wire is very accurate and uniform from one end to the other. Our wire drawing process is very precise.
• The hardness is important---There are strict requirements for the softness and hardness of the ties we use, with an extension rate of about 20%. If the wire is too hard, the circle will be smaller; if the wire is too soft, it will be easy to twist off; our wire has been strictly tested and fully adapted to the machine.
• Last but not least, the plastic shaft in the middle of our tie wire is matched to the machine. Other plastic shafts may not fit into the machine. The long service life of our machine is also due to the good quality of the tie wire.
• See more on Amazon...

Features

• [IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable.
• [SMALLER SIZE & GREATER WORKING CAPACITY]---The hydraulic porta power ram has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force.
• [SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use.
• [COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are suitable for CP-180 pump.
• [WIDE RANGE OF APPLICATIONS]---Our porta power ram and hydraulic hand pump are often used in power, chemical, steel, bridges, machinery and other industries. Suitable for vertical, horizontal and inverted directions, but cannot be tilted use. In order to operate correctly, all cylinders need to be connected to a solid flat lifting surface rather than soft or rough surface.
• See more on Amazon...

Features

• [HIGH QUALITY ANTENNA, SWITCH BUTTONS & CIRCUIT BOARD]: The remote control distance is 100 meters, 360 degree barrier-free with strong penetration and no need to aim. The transmitter adopts high-performance metal contact button for durability, with a good performance circuit board. Besides, it is IP65 Class product, performing excellently in harsh environments such as high oil pollution and high humidity.
• [EXCELLENT NYLON CASE]: The wireless remote control is made of PA66 reinforced flame retardant nylon, which has strong ability to against pressure and corrosion.
• [EASY INSTALLATION]: To facilitate your installation, we provide detailed description and a color printing instruction manual.
• [KEY FUNCTION MODIFICATION]: Connecting with the computer WIN7/XP system through the special data line (needed to purchase separately), you can set the function of keys by yourself.
• [HUMANIZED DESIGN]: This hoist crane remote control is equipped with a magnetic key switch that can be used in emergency situations. With the battery voltage warning device, the circuit can be cut off automatically when the voltage is insufficient.
• See more on Amazon...

Features

• [IMPORTANT PARAMETERS]---Tonnage: 10T | Stroke: 0.43 /11mm | Self height: 2 /51mm | Outer diameter: 3.1x2.4 inches/80x60mm | Internal diameter: 1.8 inches/45mm | Weight: 3.5lbs/1.6kg | Effective area: 2.46 square inches/15.89cm2 | Usded with Pump: CP-180(not included).
• [SMALLER SIZE & GREATER WORKING CAPACITY]---The height of this hydraulic jack is only 2 inches, which can lift 10T heavy objects. It has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force.
• [SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use.
• [COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are suitable for CP-180 pump and 30T is suitable for CP-700 pump.
• [WIDE RANGE OF APPLICATIONS]---This Low Profile Hydraulic Ram Jack is often used in power, chemical, steel, bridges, machinery and other industries. Suitable for vertical, horizontal and inverted directions, but cannot be tilted use. In order to operate correctly, all cylinders need to be connected to a solid flat lifting surface rather than soft or rough surface.
• See more on Amazon...

Features

• [2 IN 1]: This electrostatic meter can measure the surface electrostatic value of objects (0-22kv), and can also measure the ionic balance of the electrostatic elimination equipment (0~200v).
• [ACCURATE MEASUREMENT]: Grounding buckle of this electrostatic field tester ensures the correct and accurate results, Measurement range: 0-20kv; Ion Balance Measurement Range 0 ~ 200V; Measurement Accuracy: 10%; Equipped with two LED lights to ensure that the measurement is kept 1inch away from the measured object.
• [LCD DIGITAL DISPLAY]: Red LCD display shows positive charge, blue LCD display shows negative charge. The 5 times/sec LCD update rate and 1 sec response time make observing and recording data more efficient. Power level also appears on the display.
• [SOUND ALARM]: Automatic alarm when the electrometer is turned on, automatically shut down and exceeds the measurable range, which allows you to clearly know the status of the electrometer.
• [WIDE APPLICATION]: This electrostatic instrument can be used in laboratory conditions to measure the electrostatic properties of textile raw materials and finished products (such as fibers, carpets, etc.), it also can be used to measure the electrostatic properties of other plate materials(such as paper, rubber, plastic, etc.)
• See more on Amazon...

Features

• [15 TON MAX PRESSURE]--- Safety weight: 15 Ton; Lateral max pull distance: 11.8 /300mm; Longitudinal max pull distance: 7.08 /180mm; Axial stroke: 1.97 /50mm; Apex degree: 24; Thread diameter: 2.36 /60mm; Diameter: 2.95 /75mm; Weight: 26.46lbs/12kg;
• [3-IN-1 & INTEGRATED DESIGN]---It integrates pump, tubing and plotter. Its forged steel double-shoulder bearings can pull two or three legs, and three jaws can be adjusted. The pump head is very flexible and can rotate 360 . The integrated molding can effectively prevent oil leakage and cracking.
• [VERTICALLY & HORIZONTALLY]---This gear puller can be used vertically and horizontally, which can fully meet various work requirements. The alloy steel jaws can be firmly fixed at the position that needs to be worked, not easy to slide.
• [QUALITY MATERIAL SELECTION]---Made of high-quality carbon steel, making it strong, corrosion resistant, and rust resistant. The jaws are forged with alloy steel, the pump body is forged with high-carbon steel, and the shell is electroplated, which will provide you with stable performance and maximum durability.
• [WIDE RANGE OF USE]---Wide range of applications, suitable for railway vehicle maintenance, mechanical installation, mine maintenance, construction engineering support etc. It can also disassemble round workpieces such as pulleys, gears and bearings in various mechanical equipment.
• See more on Amazon...

Features

• [PRECISE&STANDARD]The rebound hammer comes with a high-precision scale, which enables high accuracy and a longer service life.
• [EASY TO CARRY]The rebound tester do not need to be charged and its weight is only 1.76lb, reducing the fatigue of use.
• [WIDE APPLICATIONS]Note that this schimidt can only test the strength of concrete, not rock or other materials. It can be applied in testing buildings, roads, houses and other testing units.
• [DURABLE]The body is made of polymer composite material, and the rebound hammer can easily achieve a low-carbon and efficient effect.
• [PACKAGE LIST]You can get 1 rebound hammer, 1 millstone, 1 portable toolbox, 1 English manual and lifelong technical guidance.
• See more on Amazon...

Features

• [TECHNICAL PARAMETERS]--Free speed: 2600RPM | Maximum working pressure: 90PSI | Air inlet size: 1/4" | Air pipe size: 3/8" | Air consumption: 3CFM. Cutting range: Stainless steel: 0-0.8mm; Iron: 0-1.3mm; Aluminum: 0-1.5mm.
• [WIDE CUTTING RANGE]---Applicable materials: stainless steel, color steel tile, iron sheet, diamond mesh, aluminum sheet, screen mesh.
• [ADVANTAGES COMPARED WIHT ELECTRIC SCISSORS]---Low working pressure and environmental protection; can work in humid and dusty environment, safe to use; stronger water resistance than electric tools; can adjust the output power and speed by controlling the air intake, and the operation is simpler.
• [SHARP & FAST]---The cutting head of this power metal cutting shear is made of high-quality steel and precision forged; at the same time, the cutting head has been specially quenched and hardened,which makes it sharp and durable, fast and efficient, stable cutting and wear-resistant. The bearings are made of highly wear-resistant materials, which can absorb vibration and reduce noise when the scissors are working.
• [REAR EXHAUST HOLE DESIGN & ALUMINUM ALLOY HANDLE]---This newtry pneumatic scissor uses a reasonable rear exhaust hole design to prevent side exhaust from causing jets to the human body. At the same time, there is gauze at the air inlet, which can effectively prevent the air holes from being blocked. The handle is made of aluminum alloy. It is non-slip and wear-resistant, feels comfortable, holds firmly, and is not easy to drop.
• See more on Amazon...

Features

• [COMPACT STRUCTURE & HIGH-STRENGTH METAL SHELL]---Our pneumatic hole punch has a compact structure, weighs only about 3.4lbs, and is easy to operate. The high-strength metal shell enables it to withstand higher power and it has the characteristics of stability, durability, drop resistance and compression. The air punch flange tool is equipped with comfortable buttons. If you want to make the punch work continuously please press the button longer.
• [PARAMETER RANGE]---This metal punching airtool is suitable for stainless steel, iron, aluminum and other metal materials. The recommended thickness: stainless steel 1.0mm; aluminum alloy 2.0mm; the machine shearing force can reach 708kg/1557lbs. The striker is forged from high-strength alloy steel and can be stamped instantly.
• [EXHAUST MUFFLER PORT & 360 ROTATING PUINCH]---Inlet size: 1/4; the perforated gun body has an exhaust muffler, which can reduce the exhaust noise of the punch and provide you with more comfort work environment, but it is still recommended to wear headphones to protect your ears when using it. The punch of the flange air tool can be rotated 360 at any angle, The firing pin is forged from a special alloy steel material, which is durable and has sharp impact.
• [WIDE RANGE OF APPLICATION]---This type of pneumatic hole punch for metal has a wide range of uses, which can be used for office decoration, shop christmas decoration, installation engineering, door and window drainage, door and window furniture punching, etc.
• [PRECAUTIONS]---Please note that the firing pin is a consumable, so it is recommended to be replaced after a period of use, and this type of pneumatic hole punch tool cannot be used for rubber and spring steel. If you have other questions about the materials used and thickness, please feel free to ask us!
• See more on Amazon...

Features

• BASIC PARAMETERS---This knot tying machine features a powerful input voltage of AC100-240V, with an output voltage of 14.4V and a tying diameter range of 1 -1.57 /26-40mm. Equipped with two high-capacity 2000mAh batteries, this machine offers 0.8s knot-tying speed, with an impressive 38-42 knots tied per minute. It requires a mere 2.8 hours to fully recharge and boasts an ample wire length of 328ft (one coil). With a lightweight design and a weight of just 3.2lbs, this machine is easy to handle and maneuver, making it ideal for use in a variety of settings.
• 99.2% SUCCESS RATE---Offering exceptional reliability and performance, the NEWTRY upgraded rebar tier has passed a rigorous 1,000,000 times life test with flying colors. With a tying success rate of up to 99.2%, this innovative tool ensures consistent and accurate results every time. One of its most impressive features is the automatic knot-detaching mechanism, which ensures that the knot is easily and cleanly detached after each tying process with no dragging or tangling of the wire.
• EFFICIENT&FAST---With its powerful motor and advanced technology, this rebar tie gun can effortlessly tie 38-42 knots per minute, with each knot taking just 0.8 seconds to complete. Compared to traditional tying methods that require manual labor, this innovative tool offers good speed and efficiency, significantly reducing work time and effort. In fact, one rebar tie gun alone has the potential to replace 3-4 workers, making it a cost-effective investment for anyone looking to increase productivity and streamline their operations.
• POWERFUL 2000mAh BATTERY---Featuring a powerful 2000mAh battery capacity, this rebar tie gun boasts an impressive performance, capable of tying up to 2000 knots on a single charge. With a fast charging time of 2.8 hours, you'll be able to keep it running all day with minimal downtime. The gun comes with 2 batteries which provide a total of 4 hours of continuous use, perfect for long workdays or large projects. The dual charging station allows you to easily charge both batteries at once, ensuring that you always have a backup power source when you need it. Additionally, even after 3 years of heavy use, the batteries retain 80% of their original battery life.
• 1-5 GEAR ADJUSTABLE--The dial design makes it easy to set the machine to the desired gear - simply turn the dial and adjust the strapping strength as needed. With five grades available, the tying power increases gradually from grade 1 to 5, giving you greater control and flexibility in your work. Choosing the correct gear according to the actual situation ensures that you achieve the optimal strapping strength for your specific application, maximizing the effectiveness of your work and ensuring that your materials are securely fastened.
• See more on Amazon...

Features

• [HIGH CARBON ALLOY STEEL BLADE]---The Hydraulic Cable Cutter adopt high carbon alloy steel blade, high strength, and is specially used to cut copper aluminum wire and steel core aluminum stranded wire. Hook-type Knife Head is easy to open and close, and can be placed in any position. The blade can be replaced by opening the knife edge. The ASIN of the replacement blade: B07NMS6FQ5.
• [180 ROTATABLE HEAD & 360 FLEXIBLE USE]---The head of the industrial wire shear scissor can be rotated 180 degrees to facilitate adjustment of the working angle. It can also be operated in 360 , which is especially suitable for use in unfounded places and high-altitude projects.
• [ERGONOMICALLY DESIGNED INSULATED HANDLE+SAFETY VALVE SWITCH]---The handle of this hydraulic wire cutting tool uses a ring-shaped rubber handle to increase friction and provide a comfortable grip.Tighten (ON) when pressurizing and turn off (OFF) when releasing pressure, which is more safe and convenient.
• [SHEAR RAGNE & WIDE RANGE OF APPLICAITONS]---This Hand Crimper Tool can be used to cut copper aluminum cable,armoured cable, ACSR, wire rope, steel strand wire, copper wire,aluminum wire, steel rope,etc. But NOT SUITABLE FOR submarine cable, screw-thread rebar, iron chain or aircraft cable. Shear range: wire rope/ copper aluminum cable 4/5 , ACSR 3/4 .
• [CUSTOMER EXPERIENCE]--- I use it to cut 5/8 steel rope and it cut LIKE BUTTER. Cut 3/4 inch cable QUICKLY and EASILY even cut NO JAGGED or FRAYED EDGES. Super easy to use, makes clean splices in wire rope, no frayed edges. Very solid piece of equipment, well worth the money. In addition, this hydraulic shear also comes with an shockproof plastic carrying case for easy carrying.
• See more on Amazon...

Features

• [TWO CONTROL METHODS]----Provides wired & wireless control methods, allowing you to control your electric hoist from a distance without standing under heavy objects. Wired remote control, with a control line length of 6.5ft/2m, simple to use; 330ft/100m control range, wireless remote control can be used from anywhere within range, making them ideal for larger rooms or spaces.
• [EASY OPERATION]----Come with a pulley hook for double-line operation, which increases the load capacity. Single line load: 660lb, 32.8 ft/min, max lifting height: 40 ft; Dual line load: 1320lb, 16.4 ft/min, max lifting height: 20 ft
• [SAFETY]----Equipped with a limit switch, when rising close to the limit position, the electric hoist will automatically cut off the power to effectively protect itself, while ensuring that the wire rope position does not deviate during use.
• [HOW TO INSTALL]----The overhead crane needs a metal bar or solid wood bar to provide enough weight to hang/fix the hoist to the ceiling indoors. The installation method can be referred to Figure 5.
• [WIDELY APPLICAITON]----The power electric hoist can be used to lift regular or irregular items such as lawn mowers, engines, stones, trees, etc. Our electric hoist can be placed in garages, ceilings, attics, barns, and attics.
• See more on Amazon...

Features

• [SINGLE/DOUBLE UPPER HOOK]----Electric hoist PRO features both single and double hooks for various suspension applications. The top single hook offers 360-degree rotation for added flexibility, while the widened top double hook with a lock ensures stability. Please replace the hooks yourself by choosing the right one for your specific needs.
• [LARGE CONTROL RANGE]----The electric hoist winch provides wired and wireless control modes. The 16.4ft wired remote control allows for convenient operation near the hoist, while the wireless remote has a 330ft range and comes with two remotes for collaborative work.
• [SAFETY] ---- 1,100lb Electric hoist winch ensures safety with a strong galvanized steel rope make it not easy to break. It automatically cuts off power when reaching the upper limit position and features LED indicators for quick operational status checks.
• [EASY MAINTENANCE]----We have simplified the process of replacing carbon brushes and pairing the remote control button. No need to disassemble the entire machine. Just unscrew the appropriate screws for quick and convenient replacement or pairing.
• [ENHANCED FUNCTIONALITY]----With replacement carbon brushes, gloves for added safety, lifting straps for easy handling, and a convenient storage bag, our kit ensures that you have everything you need to optimize your usage.
• [MORE PARAMETERS]----Rated Volt: 110/120V ~ 60Hz | Plug: American standard plug | Max Lifting Load: 1,100lb | Max Lifting Height: 30ft | Max Lifting Speed: 16ft/min | Wireless Remote Control Range: 330ft | Cable Remote Control Length: 16.4ft
• See more on Amazon...

Features

• [FREE YOUR HAND] Not only can the electric hoist be controlled manually, but also a 22.6ft wired controller can be connected, which can be used by inserting it into the side socket of the electric winch. It can be used to repair the engine or lift the motorboat out of the water.
• [HIGH PERFORMANCE] The portable electric hoist can lift items up to 1,100 lbs at a lift speed of 16 ft/min, helping keep you safe as you lift. With a Max. lifting height of 25ft, the electric hoist meets the lifting needs of most homes, garages, and repair shops.
• [SAFETY] The upper & lower hooks can be rotated 360 , and its safety buckle is designed to prevent falling. The strong galvanized steel rope makes it not easy to break. When ascending close to the limit position, the 110 volt electric hoist will automatically cut off power to effectively protect itself.
• [STRONG MOTOR] A 1500W universal motor is used, which is characterized by small size and high power. This is why this 10lbs electric hoist can lift 1,100lbs quickly. But at the same time, inevitably, its sound will be a little louder and occasionally sparks. This is normal, our technicians have upgraded its cooling system to reduce this situation.
• [WIDELY APPLICATION] The lift electric hoist can be used to lift regular or irregular items such as lawn mowers, engines, stones, trees, etc. Our hoist can be placed vertically or horizontally in garages, ceilings, attics and barns.
• See more on Amazon...

Features

• This rope is exclusively for NEWTRY 500KG electric hoist, only for the follwoing products: ASIN: B082PTJ2XP (3 IN 1). Please make sure the rope is suitable for your machine befor purchase.
• Package includes: A set of 1 piece of rope, about 7.6m in length, diameter of 6mm.
• To prevent the rope from tearing or tangling: let the rope out as long as it is used and keep it tight when working; if the rope is let out too long when working and is in a loose state, it will easily tangle and tear when rewound inside.
• See more on Amazon...

Features

• [BASIC PARAMETERS]: The electric rebar cutting machine offers a cutting diameter range of 3/20 inch - 3/2 inch (4-40mm). With a reliable saw blade diameter of 5.5inch (140mm), a robust motor power of 900W, and a steady DC voltage of 40V. It boasts a cutting speed of 4-5 seconds, enabling swift and accurate operations. It also comes with 2 rechargeable lithium batteries and 1 original ceramic alloy replacement blade.
• [2000mAh LITHIUM BATTERY]: Equipped with 2 high-capacity lithium batteries, this concrete rebar cutter offers long-lasting power supply, ensuring extended usage without interruptions. Each battery features a generous storage capacity of 2000 milliamperes, allowing for continuous and stable discharges. With their impressive longevity, these batteries guarantee prolonged and reliable operation.
• [COLD CUTTING TECHNOLOGY]: The rebar cutter offers sharp and powerful fast cutting combined with low spark cold cutting technology. This innovative feature ensures the cutting machine consistently operates at a lower, safer temperature without compromising on its cutting performance. With significantly reduced sparks and the elimination of the need for flushing to cool down, you can enjoy a seamless cutting experience that guarantees enhanced safety and efficiency.
• [180 SWITCHABLE HANDLE]: Detachable handle for more convenient operation. There are three reserved holes on the portable rebar cutter, and the handle can rotate 180 with three angle adjustments. The position of the handle can be adjusted according to work needs, which helps to cut high hardness steel bars and makes manual operation more stable and safe.
• [HIGH QUALITY SAW BLADE]: The cold cut original saw blade of ceramic alloy, with a diameter of 140mm and a slotted design, has heat dissipation and seismic resistance. The thickness is 2mm and has stronger wear resistance. It can cut steel bars in 4-5 seconds.(If you need to purchase a replacement blade separately, search ASIN: B0CQC8PZ9Q)
• See more on Amazon...

Features

• DOUBLE SPEED----The lifting speed of electric hoist is available at 5m/min or 14m/min. Whether you want a faster lifting speed to improve efficiency or need a slow speed to ensure safety, can meet different needs.
• BRUSHLESS MOTOR----Electric winch is equipped with brushless motor with 1.5Kw permanent magnet inverter motor, which does not need carbon brush and commutator to achieve higher speed and reduce motor noise.
• TWO CONTROL METHODS----Provides wired & wireless control methods, allowing you to control your electric hoist from a distance without standing under heavy objects. Wired remote control, with a control line length of 19.6ft/6m, simple to use; With a control range of 330ft/100m, the wireless remote control (with emergency stop button) can be used anywhere within the range and is ideal for larger rooms or spaces.
• SAFETY----The strong galvanized steel rope makes it not easy to break. When ascending/descending close to the limit position, the electric hoist will automatically cut off power to effectively protect itself.
• WIDELY APPLICATION----The power electric hoists can be used to lift regular or irregular items such as lawn mowers, engines, stones, trees, etc. Our electric hoist can be placed in garages, attics, barns, and factories.
• See more on Amazon...

Features

• [MORE PROFESSIONAL]---As the latest electric hoist developed exclusively by NEWTRY, it has been upgraded from the inside out. The 16.4ft cable remote control adopts stronger waterproof material and has a red emergency stop button. The range of the wireless remote control has been expanded from 200ft to 330ft. What s more, considering team cooperation, we added an additional wireless remote control, 2 in total.
• [MORE CONVENIENT]---We offer an additional lifting strap and storage bag to help users lifted items and carry the power electric hoist. Rated Volt: 110/120V ~ 60Hz | Plug: American standard plug | Max Lifting Height: 30ft
• [STRONGER]---In addition to efficient control methods, the electric winch has also made many new attempts. We designed the upper hook as a double hook(saddle hook) to extend its width from 1 inch to 2.2 inches. [Note]: The upper single hook can not bear the load. A 1600W universal motor is used, which is characterized by small size and high power. This is why this 25lbs electric hoist can lift 1,100lbs quickly. But at the same time, inevitably, its sound will be a little louder.
• [SAFER]---The upper and lower hooks can be rotated 360 , and its safety buckle is designed to prevent falling. The strong galvanized steel rope makes it not easy to break. When ascending close to the limit position, the electric hoist will automatically cut off power to effectively protect itself.
• [VERSATILE USE]---The power electric hoist can be used to lift regular or irregular items such as lawn mowers, engines, stones, trees, etc. Our electric hoist can be placed vertically or horizontally in garages, ceilings, attics, barns, and attics.
• See more on Amazon...

Features

• 3pcs of Dust Collection Bags for DF-40S Grinder
• See more on Amazon...

Features

• [EFFICIENT CONTROL]: NEWTRY crane remote has flexible wireless system. It is 360 degree barrier-free with strong penetration and better suited to complex industrial environments.
• [PLUGGABLE ON/OFF SWITCH]: Upgraded remote control adopts pluggable keys, which can prevent unauthorized personnel from using it.
• [EMERGENCY BUTTON]: When an emergency event occur, press the button will scram the operation. It can meet the customer s demand for safety.
• [LED LIGHT]: The transmitter and receiver are equipped with LED lights which can clearly indicate their operating status.
• [DURABLE]: To avoid inefficient performance of the device due to frequent battery replacement, the transmitter is designed with low power consumption.
• See more on Amazon...

Features

• [Durable Blade]: The blade of the hydraulic cutter is made of high quality special steel, which has good expansion ability after heat treatment. It is thick enough to be used for a long time.
• [Upgraded Tong Head]: Tong head is made of alloy steel. It is not easy to break as it is hard and has high stability. The threads are less likely to come off and deform if you tighten them.
• [Anti-Slip Handle]: The handle is designed according to the ergonomic, it is more convenient and conform to work requirements. The design of anti-slip handle can greatly enhance the work efficiency.
• [Application]: The heavy duty Hydraulic cutter is suitable for dia 32mm(1.26 inch) steel wire rope, dia 32mm(1.26 inch) ACSR, dia 32mm(1.26 inch) cable, dia 12mm(0.47 inch) rebar. The cutting force can reach to 60KN.
• [Efficiency]: The Hydraulic cutting machine can work 360-degree, especially for places without a foothold and working high above the ground. You can adjust the working angle as you wished and better improve your work efficiency.
• See more on Amazon...

Features

• Hook: Upper and lower hooks can rotate 379 degrees
• All-copper motor
• Sturdy
• All-metal gear box
• See more on Amazon...

Features

• Machine Accessories
• See more on Amazon...

Features

• 2200lb Capacity----1T Electric Chain Hoist is widely used for moving or lifting in factories, installation machinery, workshops, facilities, warehouses, garages and construction sites.
• Brushless Motor Technology----This electric chain hoist is equipped with an 2500W brushless motor, providing durable operation. Low noise, no need to replace carbon brushes.
• Dual Lifting Speeds----With two selectable lifting speeds(13ft/min|22.3ft/min), this hoist offers versatile operation to match the specific requirements of your task.
• Dual Control Options----There are 8.2ft wired control and 330ft wireless remote control for your choice. Users can choose between the reliability of wired control or the flexibility of wireless remote control, providing maximum adaptability in various working environments.
• G80 Silver Chain----The use of G80 silver chain not only adds to the aesthetic appeal, but also ensures durability. 3m/10ft length of chain is supplied with a chain bag for easy storage.
• See more on Amazon...

Features

• [BUTTON DESIGN]---6 single-speed buttons, 2 two-position toggle switches, 2 three-position toggle switches, 2 5-speed rockers, and a mushroom head master stop switch. The "emergency stop" button of the crane remote control designed by European international standards has a response time of 0.17 seconds faster than similar products. The green safety key switch can prevent unauthorized persons from using it, making it safer.
• [POWERFUL FUNCTIONS]---Remote control distance: 100 meters. The number of control points reaches 40. It can also be connected to the computer interface to set internal functions according to your needs.
• [IP65 PROTECTION]---IP65 protection makes the remote control work in harsh condition, like high temperature and humidity. Integrated design, exquisite and elegant, gentle and smooth texture, pure surface sandblasting injection molding process, with an elegant arc in line with ergonomics.
• [CONVENIENT TO USE]---The waist belt and shoulder strap of the remote control can be adjusted in length to resolve the pressure and provide the operator with a more comfortable control experience.
• [HARDWARE ASSISTED]---The internal hardware is made of special forged stainless steel SUS304R-1/2H, which has been designed for hundreds of EMC tests to effectively shield electromagnetic interference.
• See more on Amazon...