Narex - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from Narex on Amazon
- Narex Bevel Edge Chisel Set with Wooden Handles, Set of 4 pcs
- Narex 6 pc Set 6 mm (1/4), 10 (3/8), 12 (1/2), 16 (5/8), 20 (13/16), 26 (1-1/16) Woodworking Chisels...
- Narex Unhandled Dual Bevel Marking Knife Kit with Finger Indents Stainless Steel Blade (0.100" Thick...
- Narex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents (0.060" Thick Blade)
- Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Hea...
- Narex Premium Corner Chisel 10 mm
- Narex 50 mm (2 Inch) Woodworking Cabinetmaker's Chisel with Beech Handle 810150
- Narex 853654 4 Piece Set of Richter Extra Bevel Edge Chisel (1/4, 1/2, 3/4 and 1 inch) Cryogenic Tre...
- Narex Round Turned 250 gram 9 oz Beech Wood Carving Mallet 825701
- Narex Czech Steel Premium 4 pc set 6 (1/4), 12 (1/2), 20 (3/4), 26 (1) mm Chisels w/Hornbeam Handles
#1
Narex Bevel Edge Chisel Set with Wooden Handles, Set of 4 pcs
Asin: B00GPC74ZQ | Model: 863010 | PartNumber: 863010 | Ean: 7241870678514, 0616909150526, 7566908067949, 5272003715044, 0733353660729 | UPC: 733353660729, 616909150526
Handles Are Ergonomic With Oval Cross-Section..
Made In The Czech Republic..
Blade Sizes: 6 Mm (1/4"), 12 Mm (1/2"), 20 Mm (13/16") And 26 Mm (1 1/32")..
Meets Din 5139 Requirements..
Features
- Blades are made from highly alloyed Cr-Mn steel, hardened up to Rc 59.
- Meets DIN 5139 requirements.
- Handles are ergonomic with oval cross-section.
- Blade sizes: 6 mm (1/4), 12 mm (1/2), 20 mm (13/16) and 26 mm (1 1/32).
- Made in the Czech Republic.
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
Dimensions: 1.50 x 6.37 x 13.50 inches
See On Amazon #2
Narex 6 pc Set 6 mm (1/4), 10 (3/8), 12 (1/2), 16 (5/8), 20 (13/16), 26 (1-1/16) Woodworking Chisels in Wooden Presentation Box 853053
Asin: B0165WKKY2 | Model: 853053 | PartNumber: 853053 | Ean: 0700667464169, 7753659294032, 0798154074670 | UPC: 798154074670, 700667464169
Contains The Following Sizes: 6, 10, 12, 16, 20 And 26 Mm.
Handles Are Made From Stained European Beech.
Bevel Ground At A 25 Degree Bevel..
Blades Are Made From Fine-Grained, Nicely Tempered Chrome-Manganese Steel And Hardened To Rc 59.
Features
- 6 piece set comes on a wooden presentation box
- Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
- Contains the following sizes: 6, 10, 12, 16, 20 and 26 mm
- Bevel ground at a 25 degree bevel.
- Handles are made from stained European Beech
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
Dimensions: 1.50 x 6.37 x 13.50 inches | Weight: 1.63 pounds
See On Amazon #3
Narex Unhandled Dual Bevel Marking Knife Kit with Finger Indents Stainless Steel Blade (0.100" Thick Blade)
Asin: B0959XCSX6 | Ean: 8590710000787
The Blade Has A Dual-Bevel Spear Point Tip. The Tip Is Ground To 55 Degrees With A 25-Degree Grind On Both Bevels. The Bevels Are Precision Ground On Cnc Machines. The Laser Cut Finger Indents Are Useful For Applying Pressure Closer To The Tip..
The Knife Can Be Used Either Unhandled Or Wood Scales Can Be Attached To Create A Handle. If A Handle Is Desired The Kit Comes With 2 Brass Pins To Affix Scales To The Blade..
The Dual Bevel Will Mark Distinct Lines On Both The Right And Left Side Of A Part Or Guide. It Will Leave Crisp Lines When Marking With And Against The Grain And On End Grain. The Knife May Require Just A Light Stropping To Remove A Small Wire Edge To Get It Razor Sharp And Ready To Use..
The Blade Is Made From Aisi 420 Corrosion Resistant Stainless Steel And Hardened And Tempered To Hrc 57. This Steel Is A Traditional Knife Steel And Designed To Take And Hold A Keen Edge And Resist Corrosion. The Blade Is 5-7/8 Inches Long, 1/2 Inch Wide And Come In 3 Thicknesses: 0.030", 0.060" Or 0.100 Inch Thick..
Features
- A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic.
- The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. This steel is a traditional knife steel and designed to take and hold a keen edge and resist corrosion. The blade is 5-7/8 inches long, 1/2 inch wide and come in 3 thicknesses: 0.030, 0.060 or 0.100 inch thick.
- The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The laser cut finger indents are useful for applying pressure closer to the tip.
- The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
- The knife can be used either unhandled or wood scales can be attached to create a handle. If a handle is desired the kit comes with 2 brass pins to affix scales to the blade.
- See more on Amazon...
Brand: Narex | Manufacturer: Mikov
See On Amazon #4
Narex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents (0.060" Thick Blade)
Asin: B0959LBB4K | Ean: 8590710000824
The Dual Bevel Will Mark Distinct Lines On Both The Right And Left Side Of A Part Or Guide. It Will Leave Crisp Lines When Marking With And Against The Grain And On End Grain. The Knife May Require Just A Light Stropping To Remove A Small Wire Edge To Get It Razor Sharp And Ready To Use..
The Handle Is 3/8-Inch-Thick And Made From Mexican Rosewood Which Has Been Hand Sanded And Polished. The Scales Are Attached To The Blade Via Two Brass Pins. The Handle Makes The Perfect Size For A Nimble Yet Stout Marking Knife. The Square Handle Profile Prevents The Knife From Rolling Off The Bench..
The Laser Cut Finger Indents Are Useful For Applying Pressure Closer To The Tip. The Blade Is The Perfect Tool To Make Marks In Narrow Recesses Such As When Transferring Pins/Tails Marks During Dovetailing..
The Blade Is Made From Aisi 420 Corrosion Resistant Stainless Steel And Hardened And Tempered To Hrc 57. The Blade Is 1-7/8 Inches Long, 1/2 Inch Wide And Comes In 3 Thicknesses, 0.030", 0.060" Or 0.100 Inch Thick. The Blade Has A Dual-Bevel Spear Point Tip. The Tip Is Ground To 55 Degrees With A 25-Degree Grind On Both Bevels. The Bevels Are Precision Ground On Cnc Machines..
Features
- A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic.
- The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0.030, 0.060 or 0.100 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines.
- The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
- The laser cut finger indents are useful for applying pressure closer to the tip. The blade is the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing.
- The handle is 3/8-inch-thick and made from Mexican Rosewood which has been hand sanded and polished. The scales are attached to the blade via two brass pins. The handle makes the perfect size for a nimble yet stout marking knife. The square handle profile prevents the knife from rolling off the bench.
- See more on Amazon...
Brand: Narex | Manufacturer: Mikov
Dimensions: 1.00 x 6.00 x 1.00 Inches
See On Amazon #5
Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800 (One Pack)
Asin: B017Z91D1S | Model: 813800 | PartNumber: 813800 | Ean: 0700667465043 | UPC: 700667465043
Blade Is .090" Thick And .380" Wide.
Blade Length Is 2.75" Long And Handle Is 4.125" Long.
Single Bevel Sharpened Ground At 25 Degrees And Dual Bevels Sharpened At 5 Degrees On Each Side.
Blade Made From Highly Allowed Cr-Mn Steel And Heat Treated To Hrc 58.
Features
- Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic.
- Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58
- Blade is .090 thick and .380 wide
- Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side
- Blade length is 2.75 long and handle is 4.125 long
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
Dimensions: 2.00 x 12.00 x 7.00 inches | Weight: 0.02 pounds
See On Amazon #6
Narex Premium Corner Chisel 10 mm
Asin: B0049MXKZM | Model: 813410 | PartNumber: 813410 | Ean: 8590137134102, 5448095836756
Polished Blade Is Made Of Traditional Cr-Mn Steel And Is Heat Treated To 59 Hrc.
Smooth And Precise Squaring Of The Corners In The Angle Of 90°.
Ergonomic Handle From Hard And Hefty Hornbeam Wood.
Handle Size: 145 Mm X 37 Mm.
Features
- Blade length: 120 mm / blade width: 10 mm
- Handle size: 145 mm x 37 mm
- Polished blade is made of traditional Cr-Mn steel and is heat treated to 59 HRc
- Ergonomic handle from hard and hefty hornbeam wood
- Smooth and precise squaring of the corners in the angle of 90
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
Dimensions: 4.72 x 10.43 x 3.94 inches | Weight: 0.40 pounds
See On Amazon #7
Narex 50 mm (2 Inch) Woodworking Cabinetmaker's Chisel with Beech Handle 810150
Asin: B00V92MIIU | Model: 810150 | PartNumber: 810150 | Ean: 0700667462936 | UPC: 700667462936
50 Mm (2") Wide Blade.
Handle Made From Laquered Beechwood.
Bevel Ground At A 25 Degree Bevel..
Blade Is Made From Fine-Grained, Nicely Tempered Chrome-Manganese Steel And Hardened To Rc 59.
Features
- Made by a small tool manufacturer in the Czech Republic
- Blade is made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
- 50 mm (2) wide blade
- Bevel ground at a 25 degree bevel.
- Handle made from laquered Beechwood
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
Dimensions: 0.04 x 12.00 x 2.00 Inches
See On Amazon #8
Narex 853654 4 Piece Set of Richter Extra Bevel Edge Chisel (1/4, 1/2, 3/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules
Asin: B0BKDLP1ZD | Model: 853654 | PartNumber: 853654 | Ean: 8590137536548
Subsequent Fine-Grinding And Polishing Ensure A Mirror-Like Surface With Ultra-Thin Sides Allowing Reach Into Very Tight Spaces, Making Them The Perfect Chisel For Cleaning Out Dovetails..
Set Comes With The Following Sizes: 1/4, 1/2, 3/4 And 1 Inch.
Chisel Handles Are Made Of Domestically And Responsibly Harvested European Ash Known For Its Strength, Toughness And Attractive Grain. The Ergonomic Handles Are Sanded And Then Receive A Friction Shellac Finish For Maximum Protection, Comfort And Control. Solid Stainless-Steel Ferrules Protect The Handles From Splitting, And Leather Washers Absorb The Shock Of Mallet Blows..
Richter Chisel Blades Are Made From The Highest Quality Chrome Manganese (Cr-V) Steel Using Traditional Drop-Forging Methods. Blades Are Then Hardened, Cryogenically Treated And Tempered To Achieve A Minimal Hardness Of 62 Hrc. Following Initial Hardening, Cryogenic Treatment Is Performed Which Cools The Steel Down To −190° C (-310O F) Using Liquid Nitrogen. This Alters The Mechanical Properties Of The Steel At The Molecular Level Greatly Increasing Its Strength, Toughness And Wear Resistance..
Features
- To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.
- Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to 190 C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.
- Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.
- Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows.
- Set comes with the following sizes: 1/4, 1/2, 3/4 and 1 inch
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
See On Amazon #9
Narex Round Turned 250 gram 9 oz Beech Wood Carving Mallet 825701
Asin: B018JOQ7GY | Model: 825701 | PartNumber: 825701 | Ean: 0700667465180 | UPC: 700667465180
Wood Is Finished European Beech..
Total Weight: 9 Oz (250 G).
Overall Length: 10" (245 Mm).
Head Measures 2 1/2" In Diameter.
Features
- Mallet made by a highly respected tool manufacturer in the Czech Republic
- Head measures 2 1/2 in diameter
- Wood is finished European Beech.
- Overall Length: 10 (245 mm)
- Total Weight: 9 oz (250 g)
- See more on Amazon...
Brand: Narex | Manufacturer: Narex
Dimensions: 3.00 x 6.30 x 13.50 inches | Weight: 0.55 Pounds
See On Amazon #10
Narex Czech Steel Premium 4 pc set 6 (1/4), 12 (1/2), 20 (3/4), 26 (1) mm Chisels w/Hornbeam Handles
Asin: B00H6RD4PI | Model: 863201 | PartNumber: 863201 | Ean: 0616909150601 | UPC: 616909150601
Blade Sizes Are 6 Mm (1/4.
Handles From From Super Hard European Hornbeam.
Bevel Ground At A 25 Degree Bevel..
Blades Are Made From Fine-Grained, Nicely Tempered Chrome-Manganese Steel And Hardened To Rc 59.
Features
- Made by a small tool manufacturer in the Czech Republic
- Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
- Blade sizes are 6 mm (1/4
- Bevel ground at a 25 degree bevel.
- Handles from from super hard European Hornbeam
- See more on Amazon...
Manufacturer: Narex
Dimensions: 1.50 x 6.37 x 13.50 Inches | Weight: 1.63 pounds
See On Amazon