Nitze - Buying Guide
Last Updated: 05/08/2024
Share on
Bestselling from Nitze on Amazon
- Nitze V Mount Battery Plate with 8V/3A DC, 14.8V/3A D-tap and PD 3.0 USB-C Output Ports Mini V Mount...
- Nitze Camera Clip, Aluminum Capture Clip, Backpack Strap Camera Mount with 4-Side Mountable Arca Qui...
- Nitze Camera Top Handle with NATO Clamp, Mini NATO Handle with Built-in Anti-Off Cold Shoe for DSLR ...
- Nitze 15mm Rod with 1/4 Screw 1 Inch/2 Inches/3 Inches (3 pcs) Aluminum Alloy 15mm Rods wtih 1/4" M...
- Nitze NATO Top Handle, NATO Handle with Built-in NATO Rail, Quick Release NATO Clamp, NATO Rail and ...
- Nitze Ninja V Cage Kit for Atomos Ninja/Ninja Ultra/Ninja V/Ninja V Plus/Shinobi/ZATO Connect Monito...
- Nitze Ergonomic Side Handle with ARRI Rosette, Up and Down Adjustable Left/Right Side Handle for Cam...
- Nitze 15mm Universal Lens Support with Rolling Y-Bracket and 1/4 , 3/8 and M3 Height Extension Posts...
- Nitze Mini Follow Focus Kit with 3 Reversible Drive Gears, 2 Marking Disks, Gear Ring Belt, 15mm Rod...
- Nitze LiDAR Mounting Kit Compabitle DJI LiDAR Range Finder for RS 3 Pro and DJI RS Focus Motor - T-D02A
#1
Nitze V Mount Battery Plate with 8V/3A DC, 14.8V/3A D-tap and PD 3.0 USB-C Output Ports Mini V Mount Plate - N21-D6
Asin: B0B5YXHLDS | Model: N21-D6 | PartNumber: N21-D6
【Usb-C Port】The Usb-C Ports Of The Mini V Mount Plate Supports 5V/2.4A,9V/3A,12V/2A(Pd3.0/Qc3.0/Fcp) Output..
【Note】Please Pay Attention To Use The Same Adapter Cable As The V Mount Plate Interface Voltage To Avoid Short Circuit..
【Accessories Match】The V Mount Battery Plate Can Be Connected With E2-Fs-V Series V Mount Adapter By Two 1/4” Screws..
【Dc&D-Tap Ports】The V Mount Plate Provides One 8V/3A Dc Jack And Two 14.8V/3A D-Tap Sockets..
Features
- Aluminum Alloy Material Nitze N21-D6 v mount battery plate is made of aluminum alloy which is sturdy and durable.
- DC&D-tap Ports The v mount plate provides one 8V/3A DC jack and two 14.8V/3A D-tap sockets.
- USB-C Port The USB-C ports of the mini v mount plate supports 5V/2.4A,9V/3A,12V/2A(PD3.0/QC3.0/FCP) output.
- Accessories Match The v mount battery plate can be connected with E2-FS-V series v mount adapter by two 1/4 screws.
- Note Please pay attention to use the same adapter cable as the v mount plate interface voltage to avoid short circuit.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 3.74 x 3.19 x 1.02 inches | Weight: 0.39 pounds
See On Amazon #2
Nitze Camera Clip, Aluminum Capture Clip, Backpack Strap Camera Mount with 4-Side Mountable Arca Quick Release Plate for DSLR/Mirroless Camera, Action Camera - N58A
Asin: B0C4TD6FQR | Model: N58A | PartNumber: N58A
【Double Security】After Sliding The Arca Quick Release Plate, Pull Out The Silver Locking Knob And Turn It In The Direction Of The Lock Icon For Double Security. If You Want To Release The Plate, Please Turn The Silver Locking Knob In The Direction Of The Unlock Icon And Press The Locking Knob..
【Magnetic Flat-Head Screwdriver】The Included Magnetic Flathead Screwdriver Provides Easy Installation And Removal Of The Camera..
【Adjustability】The Quick Release Shoulder Strap Mount Can Be Attached To Any Strap Or Belt Up To 65 Mm Wide And 12 Mm Thick. The Strap Clamp Can Be Adjusted And Locked By The Silver Thumbscrews On The Top..
【Arca Swiss Quick Release Plate】The Capture Clip Features A Arca Quick Replease Plate. It Allows You To Lock Your Camera With A 1/4” Screw And Mount It To The Shoulder Strap Mount Or To A Tripod. Besides, It Can Be Installed From Four Sides, Supporting You To Mount The Camera In Different Directions Depending On The Size And Weight Of Your Lens..
Features
- Superb Quality Nitze N58A quick release camera clip is made of sturdy and durable aluminum alloy. With a payload of up to 20 kg, it can securely hold your camera mount and free your hands.
- Arca Swiss Quick Release Plate The capture clip features a Arca quick replease plate. It allows you to lock your camera with a 1/4 screw and mount it to the shoulder strap mount or to a tripod. Besides, it can be installed from four sides, supporting you to mount the camera in different directions depending on the size and weight of your lens.
- Double Security After sliding the Arca quick release plate, pull out the silver locking knob and turn it in the direction of the lock icon for double security. If you want to release the plate, please turn the silver locking knob in the direction of the unlock icon and press the locking knob.
- Adjustability The quick release shoulder strap mount can be attached to any strap or belt up to 65 mm wide and 12 mm thick. The strap clamp can be adjusted and locked by the silver thumbscrews on the top.
- Magnetic Flat-head Screwdriver The included magnetic flathead screwdriver provides easy installation and removal of the camera.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 0.91 x 3.66 x 1.73 Inches | Weight: 0.25 pounds
Warranty: 2 Year Warranty
See On Amazon #3
Nitze Camera Top Handle with NATO Clamp, Mini NATO Handle with Built-in Anti-Off Cold Shoe for DSLR and Mirrorless Camera Rigs (Lil Stinger II Handle) - PA28M-D1
Asin: B0B9GHZS5M | Model: PA28M-D1 | PartNumber: PA28M-D1
【Built-In Nato Clamp】Built-In Nato Clamp On The Bottom Of The Handle Allows You Quickly Attach Or Detach To Accessories With Nato Rail By Turning The Knob. Please Note That Pa28m-D1 Lil Stinger Ii Handle Doesn’T Include A Nato Rail..
【Ergonomic Design】Ergonomic Design Handle Is Comfortable To Hold, And It Is Not Easy To Get Tired For Long-Term Shooting..
【Anti-Off Cold Shoe】Built-In Cold Shoe On The Top Of The Handle Allows You To Mount Microphone, Monitor Mount Or Other Accessories With Cold Shoe Adapter Directly. Anti-Off Pin Design Prevents The Accessories From Accidentally Falling Off..
【Lightweight Design】The Nato Top Handle Weighs Only 140 G, Which Can Reduce The Burden Of Long-Term Handheld Shooting..
Features
- Lil Stinger II Handle Nitze PA28M-D1 mini NATO handle is new version of the Lil Stinger series. It is made of anodized aluminum alloy for lightweight and durability.
- Lightweight Design The NATO top handle weighs only 140 g, which can reduce the burden of long-term handheld shooting.
- Built-in NATO Clamp Built-in NATO clamp on the bottom of the handle allows you quickly attach or detach to accessories with NATO rail by turning the knob. Please note that PA28M-D1 Lil Stinger II handle doesn t include a NATO rail.
- Anti-off Cold Shoe Built-in cold shoe on the top of the handle allows you to mount microphone, monitor mount or other accessories with cold shoe adapter directly. Anti-off pin design prevents the accessories from accidentally falling off.
- Ergonomic Design Ergonomic design handle is comfortable to hold, and it is not easy to get tired for long-term shooting.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 2.52 x 4.45 x 1.18 inches | Weight: 0.31 Pounds
See On Amazon #4
Nitze 15mm Rod with 1/4 Screw 1 Inch/2 Inches/3 Inches (3 pcs) Aluminum Alloy 15mm Rods wtih 1/4" Male to Female Threads - R15-1/4-KIT
Asin: B08CZ164JZ | Model: R15-1/4-Kit | PartNumber: R15-1/4-Kit | Ean: 0783103251141 | UPC: 783103251141
【1/4" Screw Locking】The 15Mm Rod Can Be Screwed Directly On Any Accessories With 1/4" Threaded Holes. The Small Holes On The Rod Allow It To Be Screwed Tighter By Using A Hex Spanner..
【Package Includes】Nitze R15-1/4-Kit 15Mm Rod Kit Includes 3 Rods: 1" 15Mm Rod X1, 2" 15Mm Rod X1, 3" 15Mm Rod X1..
【Aluminum Alloy Material】The 15Mm Rod Kit With 1/4" Screw Is Made Of Anodized Aluminum Alloy For Strength And Durability..
【Unlimited Extension】Interfaced 1/4” Screw And 1/4” Threaded Hole In The Each End Of The 15Mm Rod Can Be Used To Extend The Rod Length Without Using A Connection Screw..
Features
- Standard 15mm Rod Nitze R15-1/4-KIT 15mm rod kit features a standard 15mm diameter and is suitable for all accessories with 15mm rod clamp.
- Unlimited Extension Interfaced 1/4 screw and 1/4 threaded hole in the each end of the 15mm rod can be used to extend the rod length without using a connection screw.
- 1/4 Screw Locking The 15mm rod can be screwed directly on any accessories with 1/4 threaded holes. The small holes on the rod allow it to be screwed tighter by using a hex spanner.
- Aluminum Alloy Material The 15mm rod kit with 1/4 screw is made of anodized aluminum alloy for strength and durability.
- Package Includes Nitze R15-1/4-KIT 15mm rod kit includes 3 rods: 1 15mm rod x1, 2 15mm rod x1, 3 15mm rod x1.
- See more on Amazon...
Brand: Nitze | Manufacturer: shenzhenshi Xinyishengwujinyouxiangongsi
Weight: 0.15 Pounds
See On Amazon #5
Nitze NATO Top Handle, NATO Handle with Built-in NATO Rail, Quick Release NATO Clamp, NATO Rail and Cold Shoe Adapter, Camera Top Handle for Camera Rigs (Stinger Handle) - PA28-A
Asin: B08CR2SDN8 | Model: PA28-A | PartNumber: PA28-A | Ean: 0783103251073 | UPC: 783103251073
【Cold Shoe Adapter】The Top Handle Is Equipped With A Cold Shoe Adapter Which Can Be Attached By Two 1/4” Screws. You Can Mount It In Different Locations On The Handle For Flexibility..
【Adjustable Nato Clamp】If You Find That Your Nato Rail Doesn't Fit Properly, Please Adjust The Nato Clamp. (1) Unscrew The Four Screws At The Bottom; (2) Take Out The Nato Clamp And Red Qr Lock Lever; (3) Slide The Clamp On Your Nato Rail; (4) Tighten Or Loosen The Star Wheel By The Red Qr Lock Lever; (5) Put The Nato Clamp Back And Lock The Four Screws..
【Built-In Nato Rail And Clamp】Built-In Nato Rail On The Top Provides Convenience For Attaching Accessories With Nato Clamp. Nato Clamp On The Bottom Of The Handle Can Be Quickly Attached And Detached By The Quick Release Lever..
【Ergonomic Design】Nitze Stinger Handle Is Ergonomically Designed To Provide You With A More Comfortable Experience During Long-Time Shooting..
Features
- Multiple Mounting Points Nitze NATO top handle PA28-A is filled with 1/4 -20 threaded holes, 1/4 locating holes, 3/8 ARRI locating holes all around the handle for more accessories expansion.
- Ergonomic Design Nitze stinger handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting.
- Cold shoe Adapter The top handle is equipped with a cold shoe adapter which can be attached by two 1/4 screws. You can mount it in different locations on the handle for flexibility.
- Built-in NATO Rail and Clamp Built-in NATO rail on the top provides convenience for attaching accessories with NATO clamp. NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever.
- Adjustable NATO Clamp If you find that your NATO rail doesn't fit properly, please adjust the NATO clamp. (1) Unscrew the four screws at the bottom; (2) Take out the NATO clamp and red QR lock lever; (3) Slide the clamp on your NATO rail; (4) Tighten or loosen the star wheel by the red QR lock lever; (5) Put the NATO clamp back and lock the four screws.
- See more on Amazon...
Brand: Nitze | Manufacturer: shenzhenshi Xinyishengwujinyouxiangongsi
Dimensions: 2.64 x 5.98 x 1.14 inches | Weight: 0.59 pounds
Warranty: 2 Year Warranty
See On Amazon #6
Nitze Ninja V Cage Kit for Atomos Ninja/Ninja Ultra/Ninja V/Ninja V Plus/Shinobi/ZATO Connect Monitor with Sunhood, HDMI Cable Clamp, Built-in NATO Rail and Cold Shoe - JT-A02B
Asin: B0B74TDL22 | Model: JT-A02B | PartNumber: JT-A02B
【Built-In Nato Rail】Built-In Nato Rail On The Bottom Of The Cage Makes Your Accessories Expansion More Quickly And Convenient. You Can Mount Accessories With Nato Clamp Directly Such As Nitze N54 Series Monitor Holder..
【Sunhood】The Sunhood Meets Outdoor And Glare Shooting Needs, And It Can Be Unloaded Easily By Releasing The Velcro Strap..
【Hdmi Cable Clamp】Pe11 Hdmi Cable Clamp Firmly Fixes Your Hdmi Cable And Prevents It From Shifting Or Being Damaged..
【Securely Locking】Firmly Locking Your Monitor By Two 1/4” Screw On The Top And Bottom Of The Cage..
Features
- High Compatibility Nitze JT-A02B monitor cage with sunhood is compatible with Atomos Ninja / Ninja Ultra / Ninja V / Ninja V Plus / Shinobi / ZATO Connect monitor.
- Securely Locking Firmly locking your monitor by two 1/4 screw on the top and bottom of the cage.
- Built-in NATO Rail Built-in NATO Rail on the bottom of the cage makes your accessories expansion more quickly and convenient. You can mount accessories with NATO clamp directly such as Nitze N54 Series monitor holder.
- HDMI Cable Clamp PE11 HDMI cable clamp firmly fixes your HDMI cable and prevents it from shifting or being damaged.
- Sunhood The Sunhood meets outdoor and glare shooting needs, and it can be unloaded easily by releasing the Velcro strap.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 4.33 x 6.54 x 0.87 inches | Weight: 0.31 pounds
Warranty: 2 Year Warranty
See On Amazon #7
Nitze Ergonomic Side Handle with ARRI Rosette, Up and Down Adjustable Left/Right Side Handle for Camera and Monitor Rigs - PA29A
Asin: B0BHSGVCW9
【For Left Or Right Hand】The Arri Rosette Connecting Section Can Be Mounted To Both Sides By Two M4 Screws. You Can Use It As A Left Side Handle Or Right Side Handle..
【Mounting Points】One Built-In Cold Shoe, Six 1/4” Threaded Holes And One 3/8” Arri Locating Holes On The Top Of The Side Handle For Accessories Expansion. The Strap Slots Can Be Used To Mount Nitze N58-R2 Hand Strap..
【Up And Down Adjustable】The Height Of The Connection Part Can Be Adjusted Within 28 Mm..
【Ergonomic Design】Ergonomic Design Handle Is Comfortable To Hold, And It Is Not Easy To Get Tired For Long-Term Shooting..
Features
- Rubberized Aluminum Side Handle Nitze PA29A side handle with ARRI rosette is made of aluminum alloy and covered with rubber for more comfortable grip and durability. It can be mounted to camera or monitor cages.
- Ergonomic Design Ergonomic design handle is comfortable to hold, and it is not easy to get tired for long-term shooting.
- For Left or Right Hand The ARRI rosette connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle.
- Up and Down Adjustable The height of the connection part can be adjusted within 28 mm.
- Mounting Points One built-in cold shoe, six 1/4 threaded holes and one 3/8 ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 pounds
See On Amazon #8
Nitze 15mm Universal Lens Support with Rolling Y-Bracket and 1/4 , 3/8 and M3 Height Extension Posts - N04B
Asin: B08TQNSFTM | Model: N04B | PartNumber: N04B | Ean: 0715377740700 | UPC: 715377740700
【Snap-On Design】The Snap-On Design Supports The Mounting Or Removal Of The Lens Holder To A 15Mm Rod Without Removing Attachments From Other Rods..
【For Different Lenses】The Lens Support Includes A 1/4”-20 Cap, A 3/8”16 Cap, A M3 Cap And A 1/4"-20 Height Extension Post For Attaching Lenses Feature Different Threaded Holes..
【Y-Bracket】Universal Y Shape Bracket Is Compatible With The Lenses Without Support Foot Or Tripod Collar..
【High Compatibility】Available Lens Diameter Is Up To 147Mm. Vertical And Horizontal Adjustment Is 33Mm And 4Mm Respectively..
Features
- Lens Protection Nitze N04B lens support is made of anodized aluminum alloy for high durability. The wheels on the Y-shaped bracket can prevent the lens from scratching without affecting the rotation of the zoom ring or focus ring.
- High Compatibility Available lens diameter is up to 147mm. Vertical and horizontal adjustment is 33mm and 4mm respectively.
- Snap-on Design The snap-on design supports the mounting or removal of the lens holder to a 15mm rod without removing attachments from other rods.
- Y-Bracket Universal Y shape bracket is compatible with the lenses without support foot or tripod collar.
- For Different Lenses The lens support includes a 1/4 -20 cap, a 3/8 16 cap, a M3 cap and a 1/4-20 height extension post for attaching lenses feature different threaded holes.
- See more on Amazon...
Brand: Nitze | Manufacturer: shenzhenshi Xinyishengwujinyouxiangongsi
Dimensions: 1.46 x 4.41 x 1.26 inches | Weight: 0.29 pounds
See On Amazon #9
Nitze Mini Follow Focus Kit with 3 Reversible Drive Gears, 2 Marking Disks, Gear Ring Belt, 15mm Rod and 15mm Rod Clamp with NATO Rail, Support A/B Hard Stops and 360 Infinity Zoom - MF15C
Asin: B0B9B2FG7W
【Reversible Drive Gears】The Follow Focus Kit Contains 1 X 0.8 Mod/38 Teeth, 1 X 0.8 Mod/43 Teeth, 1 X 0.8 Mod/65 Teeth Drive Gears. And The Drive Gear Is Reversible. It Can Be Mounted On The Front Or Back Side Of The Follow Focus To Meet Different Focusing Needs..
【15Mm Rod & Rod Clamp】The Single Rod Follow Focus Includes A 15Mm Aluminum Alloy Rod And A 15Mm Rod Clamp. The 15Mm Rod Clamp With Nato Rail Locks With Two 1/4” Screws..
【Dual Marking Disks】The Follow Focus Comes With Two Marking Disks For Interchangeble. Snap On Magnetic Marking Disk Can Be Easily Attached Or Detached..
【A/B Hard Stops】The Follow Focus System Supports To Preset A/B Hard Stops Focal Length Or Use 360° Infinity Zoom. Built-In Threaded Holes Allow You To Put A/B Hard Stops Screws Inside When Not In Use To Prevent Loss..
Features
- Adjustable Mounting Angle Nitze MF15C mini follow focus can be installed to your desired angle by using the adjustment knob.
- A/B Hard Stops The follow focus system supports to preset A/B hard stops focal length or use 360 infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss.
- Reversible Drive Gears The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs.
- Dual Marking Disks The follow focus comes with two marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached.
- 15mm Rod & Rod Clamp The single rod follow focus includes a 15mm aluminum alloy rod and a 15mm rod clamp. The 15mm rod clamp with NATO rail locks with two 1/4 screws.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 3.35 x 5.00 x 2.48 inches | Weight: 0.60 pounds
See On Amazon #10
Nitze LiDAR Mounting Kit Compabitle DJI LiDAR Range Finder for RS 3 Pro and DJI RS Focus Motor - T-D02A
Asin: B0BX6528GF | Model: T-D02A | PartNumber: T-D02A
【Vertical & Horizontal Adjustment】The Vertical Adjustment Of Rod Mounting Is 58Mm, While The Horizontal Adjustment Of Rod Mounting Is 64Mm..
【Easy To Install】Securing The Dji Lidar Range Finder Via Two M3 Screws. Attaching The Mounting Kit To A Camera Cage Or Other Gears Via Two 1/4" Screws. Including An H2 Hex Spanner For Detaching The Cold Shoe Of Dji Lidar..
【15Mm To 12Mm Rod】15Mm To 12Mm Rod Is Suitable For Attaching The Dji Rs Focus Motor. The Vertical Adjustment Of 12Mm Rod Part Is 34Mm..
【Considerate Design】The R15-03 15Mm Rod With 1/4” Screw Can Be Mounted Directly To The N49-C2 2.5” Nato Rail With Rod Clamp. There Are Three 1/4” Threaded Holes For You To Adjust The Rod Mounting Position To Fit Your Lens..
Features
- For DJI LiDAR Range Finder Nitze mounting kit is designed for DJI LiDAR Range Finder which is compatible with DJI RS 3 Pro and DJI RS Focus Motor for easier focus.
- Considerate Design The R15-03 15mm rod with 1/4 screw can be mounted directly to the N49-C2 2.5 NATO rail with rod clamp. There are three 1/4 threaded holes for you to adjust the rod mounting position to fit your lens.
- Vertical & Horizontal Adjustment The vertical adjustment of rod mounting is 58mm, while the horizontal adjustment of rod mounting is 64mm.
- 15mm to 12mm Rod 15mm to 12mm rod is suitable for attaching the DJI RS Focus Motor. The vertical adjustment of 12mm rod part is 34mm.
- Easy to Install Securing the DJI LiDAR Range Finder via two M3 screws. Attaching the mounting kit to a camera cage or other gears via two 1/4 screws. Including an H2 hex spanner for detaching the cold shoe of DJI LiDAR.
- See more on Amazon...
Brand: Nitze | Manufacturer: Nitze
Dimensions: 2.52 x 5.91 x 4.41 inches | Weight: 0.38 pounds
Warranty: 2 Year Warranty
See On Amazon