PFCKE - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
PFCKE M14.1-1.5x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring,and Hexagonal Wrench
Asin: B0BBZPD4VC | Model: PSK-M14.1-1.5x15 | PartNumber: PSK-M14.1-1.5x15
💎 Easy To Install: Clean The Tank Before Installation, Screw The Piggyback Plug Into The Hole, Turn It Forward A Few Times, And Then Turn It Backward A Few Times. When The Plug Is In The End, Remove The Plug, Then Clean The Iron Around The Punch Hole, Tighten The Large Oil Plug Screw With A T-Socket Wrench, Then Screw In The Small Oil Plug Screw, And The Installation Is Complete..
💎 Service: Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
💎 Package Contains: 1Xstainless Steel Self-Tapping Oil Pan Oversized Piggyback Oil Drain Plug (M14.1-1.5 X 15Mm), 1X Hexagon Wrench, 3 Large Sealing O-Rings, 5X Small Sealing O-Ring.
💎 Save Time And Money: This Stainless Steel Self-Tapping Oil Pan Thread Repair Kit Can Help You Solve The Problem Of Replacing The Whole Oil Tank Due To Slipping Oil Plug Screws, And This Oversized Piggyback Engine Oil Drain Plug Matches The Fit And Function Of The Original Oil Drain Plug, Saving You A Lot Of Money And Time..
Features
- High quality stainless steel material PFCKE piggyback oil drain plug is made of high quality stainless steel material and CNC cutting technology, which has excellent corrosion resistance and is more difficult to break compared with aluminum oil drain plug.High quality O-shaped fluorine rubber gasket, which has high temperature and corrosion resistance, especially good extensibility and strong sealing to prevent oil leakage.
- Save time and money: this stainless steel self-tapping oil pan thread repair kit can help you solve the problem of replacing the whole oil tank due to slipping oil plug screws, and this oversized piggyback engine oil drain plug matches the fit and function of the original oil drain plug, saving you a lot of money and time.
- Easy to install: Clean the tank before installation, screw the piggyback plug into the hole, turn it forward a few times, and then turn it backward a few times. When the plug is in the end, remove the plug, then clean the iron around the punch hole, tighten the large oil plug screw with a T-socket wrench, then screw in the small oil plug screw, and the installation is complete.
- Package Contains: 1xstainless steel self-tapping oil pan oversized piggyback oil drain plug (M14.1-1.5 x 15mm), 1x hexagon wrench, 3 large sealing O-rings, 5x small sealing O-ring
- SERVICE: PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 1.02 x 1.02 x 0.67 Inches | Weight: 0.11 pounds
See On Amazon #2
6AN Male to 5/8 x 18 Inverted Flare Thread Adapter Fittings Aluminum Straight Black Pack of 3
Asin: B0CJJM2MQ7 | Model: 6AN5/8x18*3 | PartNumber: 6AN5/8x18*3
Seal - The 6An Flare Is Sealed At A 37 Degree Angle..
Brand Quality Assurance - We Provide 12-Month Warranty For Any Quality Issues. If You're Not 100% Completely Satisfied With Your Thread Adapter, Just Simply Contact Us And We Will Refund Or Replace Your Product Immediately. Please Contact Us First If You Have Any Question About Our Products, Our Support Team Will Try Our Best To Help You Solve All The Issues. Email Reply Within 24Hs..
Application - This Adapter Is Suitable For Connecting Oil/Fuel/Water/Fluid/Coolant/Gas Lines,Widely Used In Fuel Line/Fuel Pump/Transmission Cooler Fittings Etc..
Material - Made Of Aluminum Alloy 6061-T6, Anodized Black Surface..
Features
- SIZE- Thread size of 6AN male coupler is 9/16-18 UNF,to male thread 5/8"x 18 inverted
- MATERIAL - Made of Aluminum alloy 6061-T6, anodized black surface.
- SEAL - The 6AN flare is sealed at a 37 degree angle.
- APPLICATION - This adapter is suitable for connecting oil/fuel/water/fluid/coolant/gas lines,widely used in fuel line/fuel pump/transmission cooler fittings etc.
- BRAND QUALITY ASSURANCE - We provide 12-Month Warranty for any quality issues. If you're not 100% completely satisfied with your thread adapter, just simply contact us and we will refund or replace your product immediately. Please contact us first if you have any question about our products, our support team will try our best to help you solve all the issues. email reply within 24hs.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Weight: 1.04 ounces
See On Amazon #3
PFCKE 20 PCS M12 *1.5 Oil Drain Plug Gasket, Crush Washer Oil Drain Plug Red Copper Compression Washer Universal For Most BMW, Mercedes Benz, Yamaha, Kawasaki, Ducati, Harley, Toyota, Lexus, Nissan.
Asin: B0BKPD2WZL | Model: PSK-DTP1215 | PartNumber: PSK-DTP1215
💎 Compatibility: Suitable For M12*1.5 Oil Drain Plug, Universal For Most Bmw, Mercedes-Benz, Yamaha, Kawasaki, Ducati, Harley, Toyota, Lexus, Nissan..
💎 Value Package: 20 Red Copper Gaskets Provide A Tighter And More Secure Fit With Longer Lasting Sealing Ability Than Plastic Or Rubber Seals, Saving You Money And Time Over Your Oem Parts Selection..
💎 Size: Oil Drain Plug Compression Washer Size: Inner Diameter Is 12Mm/0.47 Inch; Outer Diameter Is 20Mm/0.79 Inch; Thickness Is 1.5Mm/0.06 Inch, It Is Recommended To Check Your Own Plug Gasket Size Is Suitable..
💎 Process: 1. Annealing Heat Treatment Process. Increase The Ductility Of Copper, Reduce Its Hardness, Appropriate Softness, So That The Copper Gasket Sealing Stronger. 2. Pickling And Purification Treatment. Form A Passivation Film On The Surface Of Copper. After Pickling And Passivation Treatment, The Corrosion Resistance Of This Copper Gasket Can Be Increased More Than 10 Times Than Other Copper Gaskets..
Features
- HIGH QUALITY: High quality red copper is used, not impure or alloy form copper, with red copper content of 99.8% or more. Red copper has good ductility and proper softness for better sealing.
- PROCESS: 1. Annealing heat treatment process. Increase the ductility of copper, reduce its hardness, appropriate softness, so that the copper gasket sealing stronger. 2. pickling and purification treatment. Form a passivation film on the surface of copper. After pickling and passivation treatment, the corrosion resistance of this copper gasket can be increased more than 10 times than other copper gaskets.
- COMPATIBILITY: Suitable for M12*1.5 oil drain plug, universal for most BMW, Mercedes-Benz, Yamaha, Kawasaki, Ducati, Harley, Toyota, Lexus, Nissan.
- SIZE: Oil drain plug compression washer size: inner diameter is 12mm/0.47 inch; outer diameter is 20mm/0.79 inch; thickness is 1.5mm/0.06 inch, it is recommended to check your own plug gasket size is suitable.
- VALUE PACKAGE: 20 red copper gaskets provide a tighter and more secure fit with longer lasting sealing ability than plastic or rubber seals, saving you money and time over your OEM parts selection.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.79 x 0.79 x 0.06 Inches
See On Amazon #4
PFCKE Oil Drain Plug M12 x 1.25 Magnetic Oil Pan Drain Plug T6 Aircraft Aluminium, with 3PCS Red Copper Washers, Suitable for Toyota, Lexus, Nissan.
Asin: B0C9THWYHZ | Model: PSK-M12125AS | PartNumber: PSK-M12125AS
Replacement: M12 X 1.25 Magnetic Oil Drain Plugs Replace Toyota, Lexus, Nissan, Please Verify The Year, Model, Engine Size And Engine Type Of Your Vehicle Is Appropriate.
Service: Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Easy To Use: Package Includes 1 Oil Drain Plug With Neodymium Magnet And 3 Copper Washers. When Changing The Oil, Simply Wipe The Debris On The Magnet..
Powerful High –Temperature Magnetism: High-Strength Rare-Earth Neodymium Magnets Are Used, With A Magnetic Force Of Up To 4500 Gauss. The Magnet Collects Engine Wear Particles And Holds Them On The Magnet, Which The Oil Filter Cannot Collect. Especially Functional In High Temperature Environments, It Effectively Removes Metal Debris From The Cycle And Extends The Life Of The Engine..
Features
- HIGH QUALITY T6 AVIATION ALUMINUM: PFCKE'S oil drain plug is made of high quality T6 aviation aluminum and CNC cutting technology, we choose T6 aviation aluminum, as it has the advantages of low density, high strength, corrosion resistance and good processability.
- POWERFUL HIGH TEMPERATURE MAGNETISM: High-strength rare-earth neodymium magnets are used, with a magnetic force of up to 4500 gauss. The magnet collects engine wear particles and holds them on the magnet, which the oil filter cannot collect. Especially functional in high temperature environments, it effectively removes metal debris from the cycle and extends the life of the engine.
- REPLACEMENT: M12 x 1.25 magnetic oil drain plugs replace Toyota, Lexus, Nissan, please verify the year, model, engine size and engine type of your vehicle is appropriate
- EASY TO USE: Package includes 1 oil drain plug with neodymium magnet and 3 copper washers. When changing the oil, simply wipe the debris on the magnet.
- SERVICE: PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: Shenzhen Huazhizao Technology CO.,Ltd
Dimensions: 1.18 x 1.18 x 0.87 Inches
See On Amazon #5
PFCKE M14 x 1.5 Magnetic Stainless Steel Oil Drain Valve Oil Pan Drain Plug Quick Valve Oil Drain Plug No Cleanup & Safe Oil Changes Compatible for Ford, GM,Hyundai,KIA and Accord CRV,Civic,Pilot.
Asin: B0CGRQLHD6 | Model: PSK-OIM14*1.5 | PartNumber: PSK-OIM14*1.5
Zero Leakage：The Drain Valve Magnetic Head And The Drain Tool Knob Head Are Sealed With O-Rings Made Of Viton, While The Valve Body And Valve Cover Use Red Copper Pressure Washers. The Design Of Multiple Sealing Components Ensures Excellent Sealing Performance And Zero Leakage..
Service: Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
High Quality And Strong Magnet Head Design: Pfcke's Oil Drain Plug Is Made Of High Quality Stainless Steel Material And Cnc Cutting Technology, Which Has Excellent Corrosion Resistance. Compared With Other Models Of Quick Oil Drain Plugs, This Oil Drain Plug Is Designed With A Strong Magnetic Head That Collects Engine Wear Particles And Adsorbs Them Onto A Magnet, Especially In High Temperature Environments, Effectively Removing Metal Debris From The Cycle And Extending The Life Of The Engine..
Quick Draining Of Hot Oil: An Upgrade To The Drain Plug Design Saves Time And Prevents Burns By Quickly And Safely Draining Hot Oil Without Having To Wait For It To Cool Down And Without Getting Your Hands And Garage Floor Dirty..
Features
- COMPATIBILITY Our quick valve oil drain plug is compatible with almost any vehicle that has an m14x1.5 thread size. It works best with popular models from Ford, GM,Hyundai,KIA and Accord CRV,Civic,Pilot,Fit,Odyssey.
- QUICK DRAINING OF HOT OIL: An upgrade to the drain plug design saves time and prevents burns by quickly and safely draining hot oil without having to wait for it to cool down and without getting your hands and garage floor dirty.
- ZERO LEAKAGE The drain valve magnetic head and the drain tool knob head are sealed with O-rings made of Viton, while the valve body and valve cover use red copper pressure washers. The design of multiple sealing components ensures excellent sealing performance and zero leakage.
- HIGH QUALITY AND STRONG MAGNET HEAD DESIGN: PFCKE's oil drain plug is made of high quality stainless steel material and CNC cutting technology, which has excellent corrosion resistance. Compared with other models of quick oil drain plugs, this oil drain plug is designed with a strong magnetic head that collects engine wear particles and adsorbs them onto a magnet, especially in high temperature environments, effectively removing metal debris from the cycle and extending the life of the engine.
- SERVICE: PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: Shenzhen Huazhizao Technology CO.,Ltd
Dimensions: 1.22 x 2.48 x 0.94 Inches
See On Amazon #6
PFCKE 8AN Male 5/8 x 18 Inverted Flare Thread Adapter Aluminum Straight Black Connector.
Asin: B0BZ42B9XM
💎【Sealing】8An Flare Has A 37 Degree Sealing Angle For Enhanced Sealing..
💎【Brand Quality Assurance】 If You Are Not 100% Completely Satisfied With The Thread Adapter, Just Contact Us And We Will Refund Or Replace Your Product Immediately. If You Have Any Questions About Our Products, Please Contact Us First, Our Support Team Will Try Our Best To Help You Solve All Your Problems, Emails Are Replied Within 12 Hours..
💎【Application】Suitable For Water/Fluid/Cooler/Gas Piping, Widely Used In Fuel Piping/Fuel Pump/Transmission Cooler Fittings, Etc..
💎【Size】8An Male Coupler Thread Size 3/4-16 Unf With 5/8" X 18 Male Thread Inverted..
Features
- Material Made of aluminum alloy 6061-T6 with anodized surface for corrosion resistance.
- Size 8AN male coupler thread size 3/4-16 UNF with 5/8 x 18 male thread inverted.
- Sealing 8AN flare has a 37 degree sealing angle for enhanced sealing.
- Application Suitable for water/fluid/cooler/gas piping, widely used in fuel piping/fuel pump/transmission cooler fittings, etc.
- Brand Quality Assurance If you are not 100% completely satisfied with the thread adapter, just contact us and we will refund or replace your product immediately. If you have any questions about our products, please contact us first, our support team will try our best to help you solve all your problems, emails are replied within 12 hours.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
See On Amazon #7
PFCKE Terminal Pin Removal Tool Kit Electrical Pin Extractor Tool, Terminal Removal Tool,with 8PCS Replacement Tips Universal for Automotive/Computer Repair Terminal Release Tool kit.
Asin: B0CXX7ZVP9 | Model: DQBLGJ8 | PartNumber: DQBLGJ8
【Compatibility】: D145 Suitable For Molex Micro-Fit 3.0Male Termin, Amp Micro Mate-N-Lok Series Male Terminal./ Fk4 Suitable For Computer 3P, 4P Fan Power Connectors./ D230 Suitable For Micro Timeri Il Ill,Tab 1.6 Seriesamp Mcp 1.5K Series,Delphi Dsq 1.5,Fep 1.5./ Hk01 Suitable For Secondary Locking Device Of Amp And Others..
【Service】Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
【Excellent Craft】: The Pin Extractor Tool Set Is Made Of High-Quality Alloy Steel After Quenching Treatment, So That The Needle To Obtain High Hardness At The Same Time Will Not Lose Its Own Ductility, High Elasticity, Not Easy To Deform, Reliable Quality..
【Compatibility】: D120 Suitable For Molex Micro-Fit 3.0 Female Terminal/N1010 Suitable For Amp Superseal 1.5,Gt280,Metripack 150, Metripack 280./ D310 Suitable For Leavyseal 2.8, Mqs 2.8,Amp Mcp2.8Jpt2.8 Series,Bosch Ignition Coil Connector./ D173 Suitable For Molex Mini-Fit Jr.5557，5559 Power Connectors(Atx/Eps/Pci-E)..
Features
- PACKAGE INCLUDES : PFCKE terminal removal tool kit includes one metal handle, one hex wrench, one hex screw and 8 replacement pins (N1010, D120, D310, D173, D145, FK4, D230, HK01), equipped with multiple replacement pins, which can be freely switched. the pin headers can be freely switched, making it easy to use and more efficient.
- COMPATIBILITY : D120 suitable for Molex Micro-fit 3.0 female terminal/N1010 suitable for AMP Superseal 1.5,GT280,Metripack 150, Metripack 280./ D310 suitable for Leavyseal 2.8, MQS 2.8,AMP MCP2.8JPT2.8 Series,Bosch ignition coil connector./ D173 suitable for Molex Mini-Fit Jr.5557 5559 Power Connectors(ATX/EPS/PCI-E).
- COMPATIBILITY : D145 suitable for Molex Micro-Fit 3.0Male Termin, AMP Micro Mate-N-Lok Series Male Terminal./ FK4 suitable for Computer 3P, 4P Fan Power Connectors./ D230 suitable for Micro TimerI Il Ill,TAB 1.6 SeriesAMP MCP 1.5K Series,Delphi DSQ 1.5,FEP 1.5./ HK01 suitable for Secondary Locking Device of AMP and others.
- EXCELLENT CRAFT : The pin extractor tool set is made of high-quality alloy steel after quenching treatment, so that the needle to obtain high hardness at the same time will not lose its own ductility, high elasticity, not easy to deform, reliable quality.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.61 x 5.31 x 0.59 Inches
See On Amazon #8
PFCKE 2 Pin Electronic LED Flasher Relay, LED Flasher Relay, Motorcycle Turn Signal Flasher Relay, Electronic Flash Rate Control Flasher.
Asin: B0C1SFXH4B | Model: PSK-MTSGD | PartNumber: PSK-MTSGD
【Compatibility】Compatible With Most Motorcycles, Such As Honda, Kawasaki, Suzuki, Yamaha, Atv, Dirt Bike, Utv, Etc..
【Pfcke's Brand Warranty】 -We Offer A 12-Month Warranty For Any Quality Issues. If You Are Not 100% Completely Satisfied With Your Product, Simply Contact Us And We Will Refund Or Replace Your Product Immediately. If You Have Any Questions About Our Products, Please Contact Us First And Our Support Team Will Try To Help You With All Your Questions, Emails Are Answered Within 24 Hours..
【Specifications】Model: Lf1-S-Pin; Operating Voltage: 12V (11V-15V); Maximum Power: 150W; Flash Frequency: 85 Times / Min; Switching Power: 0.02A To 20A; Operating Temperature: -40℃ To +80℃..
【Easy Installation】 You Only Need To Connect 2 Pins To The Battery. No Tools Are Needed. Note: If The Wiring Connectors Are Different, You Can Remove The White Connector And Plug In The Wires Directly Or A New Connector..
Features
- QUICK SOLUTION FOR LIGHT BLINKING PROBLEM This flasher relay controller will solve LED light related turn signal blinking problems such as super fast blinking, no blinking, or bulb burned out warning message on dashboard indicator or just replace the bad relay.
- EASY INSTALLATION You only need to connect 2 pins to the battery. No tools are needed. Note: If the wiring connectors are different, you can remove the white connector and plug in the wires directly or a new connector.
- COMPATIBILITY Compatible with most motorcycles, such as Honda, Kawasaki, Suzuki, Yamaha, ATV, dirt bike, UTV, etc.
- SPECIFICATIONS Model: LF1-S-PIN; Operating voltage: 12V (11V-15V); Maximum power: 150W; Flash frequency: 85 times / min; Switching power: 0.02A to 20A; Operating temperature: -40 to +80 .
- PFCKE'S BRAND WARRANTY -We offer a 12-month warranty for any quality issues. If you are not 100% completely satisfied with your product, simply contact us and we will refund or replace your product immediately. If you have any questions about our products, please contact us first and our support team will try to help you with all your questions, emails are answered within 24 hours.
- See more on Amazon...
Brand: PFCKE | Manufacturer: Shenzhen Huazhizao Technology CO.,Ltd
Dimensions: 1.61 x 1.10 x 0.98 Inches | Weight: 0.09 pounds
See On Amazon #9
PFCKE 6AN Male 1/2 x 20 Inverted Flare Thread Adapter Aluminum Straight Black Connector.
Asin: B0BZ41Q8NY
💎【Sealing】6An Flare Has A 37 Degree Sealing Angle For Enhanced Sealing..
💎【Brand Quality Assurance】 If You Are Not 100% Completely Satisfied With The Thread Adapter, Just Contact Us And We Will Refund Or Replace Your Product Immediately. If You Have Any Questions About Our Products, Please Contact Us First, Our Support Team Will Try Our Best To Help You Solve All Your Problems, Emails Are Replied Within 12 Hours..
💎【Application】Suitable For Water/Fluid/Cooler/Gas Piping, Widely Used In Fuel Piping/Fuel Pump/Transmission Cooler Fittings, Etc..
💎【Size】6An Male Coupler Thread Size 9/16-18 Unf With 1/2" X 20 Male Thread Inverted..
Features
- Material Made of aluminum alloy 6061-T6 with anodized surface for corrosion resistance.
- Size 6AN male coupler thread size 9/16-18 UNF with 1/2 x 20 male thread inverted.
- Sealing 6AN flare has a 37 degree sealing angle for enhanced sealing.
- Application Suitable for water/fluid/cooler/gas piping, widely used in fuel piping/fuel pump/transmission cooler fittings, etc.
- Brand Quality Assurance If you are not 100% completely satisfied with the thread adapter, just contact us and we will refund or replace your product immediately. If you have any questions about our products, please contact us first, our support team will try our best to help you solve all your problems, emails are replied within 12 hours.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
See On Amazon #10
8AN 90 Degree Push Lock Hose Fitting Female Swivel Push-on Adapter/Lock Hose Barb Fuel Oil Line Fitting for Rubber Fuel Line Oil Fuel Cooler Kits Reusable Hose Adaptor Anodized. 2PCS
Asin: B0CXT4R1SJ | Model: YLDCJT-8AN-90-2 | PartNumber: YLDCJT-8AN-90-2
No Leakage：1. Push-On With 37-Degree Butt Angle For Excellent Sealing 2. Push-On Locking Coupling Flange Prevents Hose From Sliding And Prevents Leakage 3. Aluminum Hose Cover Prevents Hose From Sliding And Protects Hose End Without Snagging..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Applicable: For All Oil/Fuel/Water/Fluid/Air/Gas/Coolant Lines, Cars With Turbo Conversion, Oil Cooling Radiator Installation Connections. Not Applicable To Ptfe Hose/E85 Hose/Nylon Or Stainless Steel Braided Hose..
Size: 8An (3/4-16 Unf) Female Flare To 1/2" In. Barb, 90 Degree Straight. For Use With 1/2-Inch Id Push-On Rubber Fuel Hoses. Push-Lock Hose Fittings Feature A One-Piece Design That Eliminates Two Brazed Fittings, Minimizes Potential Leaks, And Improves Flow And Appearance..
Features
- HIGH QUALITY MATERIAL: Made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse. Working Temperature: -40 to +248 (-40 to +120 ) ,Max Working Pressure: 2000 PSI.
- SIZE: 8AN (3/4-16 UNF) female flare to 1/2 in. barb, 90 degree straight. For use with 1/2-inch ID push-on rubber fuel hoses. Push-lock hose fittings feature a one-piece design that eliminates two brazed fittings, minimizes potential leaks, and improves flow and appearance.
- NO LEAKAGE 1. Push-on with 37-degree butt angle for excellent sealing 2. Push-on locking coupling flange prevents hose from sliding and prevents leakage 3. Aluminum hose cover prevents hose from sliding and protects hose end without snagging.
- APPLICABLE: For all oil/fuel/water/fluid/air/gas/coolant lines, cars with turbo conversion, oil cooling radiator installation connections. Not applicable to PTFE hose/E85 hose/nylon or stainless steel braided hose.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 5.91 x 1.02 x 4.06 Inches
See On Amazon #11
10AN Male Flare Blanking Plug Fitting Adapter Hex Head Plug 7/8-14 UNF Black Aluminum Anodized Pack of 1 .
Asin: B0CXT5ZC6D | Model: YDT10AN7-8-1 | PartNumber: YDT10AN7-8-1
Applications: 10An Male Flare Hex Plug Seal Nuts Are Widely Used In Fuel Rails, Oil Coolers, Fuel Pumps, Fuel Pressure Regulators, Fuel Filters, Radiators And More. Suitable For Fluids, Oils, Lubricants, Diesel, Fuels, Etc..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Sealing:10An (7/8-14 Unf) Male Flare Plug 37 Degree Design, 37º Sealing Angle Ensures Reliable Sealing At Maximum Working Pressure, Reusable And Long Service Life..
Dimensional Information: 10An Male Flare Threaded Hex Head Plugs Are 7/8-14 Unf, Maximum Working Pressure: 1500 Psi. Operating Temperature: -65°F To +252°F (-53°C To +122°C). Ensures Durability And Reliability In A Variety Of Applications..
Features
- Material: 10AN (7/8-14 UNF) male flare plug. Manufactured from lightweight 6061-T6 aluminum with an anodized finish for strength, durability and corrosion resistance.
- Dimensional Information: 10AN male flare threaded hex head plugs are 7/8-14 UNF, Maximum Working Pressure: 1500 PSI. Operating Temperature: -65 F to +252 F (-53 C to +122 C). Ensures durability and reliability in a variety of applications.
- APPLICATIONS: 10AN Male Flare Hex Plug Seal Nuts are widely used in fuel rails, oil coolers, fuel pumps, fuel pressure regulators, fuel filters, radiators and more. Suitable for fluids, oils, lubricants, diesel, fuels, etc.
- SEALING:10AN (7/8-14 UNF) male flare plug 37 degree design, 37 sealing angle ensures reliable sealing at maximum working pressure, reusable and long service life.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.75 x 0.98 x 0.94 Inches
See On Amazon #12
PFCKE 2 PCS NEW Clutch Roller for Tundra Renegade Summit GSX GTX MXZ, 2008-2022 Ski-Doo REV-XP, XS, XR, XM, Gen4 Compatible with 417127016
Asin: B0BVQBPVY5 | Model: PSK-LHQ | PartNumber: PSK-LHQ
💎 [Features] The Clutch Roller Uses Pei Material Imported From Germany, Which Has Excellent Mechanical Properties, High And Low Temperature Resistance And Wear Resistance, Making The Engine Speed Very Stable And The Clutch Action More Smooth..
💎 [After-Sales Service] If You Have Any Problem, Please Contact Us Immediately By Email, We Will Reply You Within 12 Hours To Solve The Problem For You..
💎 [Package Included] You Will Get 2 Clutch Rollers.
💎 [Replacement Number] Replacement For Original Number: 417127016..
Features
- [Extensive] Clutch Hard Fiber Torsion Roller for 2008-2022 Ski-Doo REV-XP, XS, XR, XM, Gen4
- [Replacement number] Replacement for original number: 417127016.
- [Features] The clutch roller uses PEI material imported from Germany, which has excellent mechanical properties, high and low temperature resistance and wear resistance, making the engine speed very stable and the clutch action more smooth.
- [Package Included] You will get 2 clutch rollers
- [After-sales service] If you have any problem, please contact us immediately by email, we will reply you within 12 hours to solve the problem for you.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.61 x 0.87 x 0.87 Inches
See On Amazon #13
AN6 ORB O Ring AN6 Male Hex Head Socket Port Plug 9/16-18 UNF Black Aluminum Anodized Pack of 2.
Asin: B0CXT4GK54 | Model: NLJ6AN9-16 | PartNumber: NLJ6AN9-16
Sealing: 6An (9/16-18 Unf) Male Hex Head Socket Port Plug Feature O-Ring Seals To Prevent Leaks And Secure Connections; Two Fittings With Two O-Rings For Improved Sealing Performance.
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Application: For All Oil/Fuel/Water/Fluid/Air Lines.
Dimensional Information: Thread Sizes 9/16-18 Unf, Working Pressure: 1500 Psi; Operating Temperature: -65°F-252°F; O-Ring Withstands Temperatures: 122°F-140°F. Ensures Durability And Reliability In A Variety Of Applications..
Features
- Material: 6AN (9/16-18 UNF) Male Hex Head Socket Port Plug. Manufactured from lightweight 6061-T6 aluminum with a black anodized finish for strength, durability and corrosion resistance.
- Dimensional Information: Thread sizes 9/16-18 UNF, Working Pressure: 1500 psi; Operating Temperature: -65 F-252 F; O-Ring withstands temperatures: 122 F-140 F. Ensures durability and reliability in a variety of applications.
- Sealing: 6AN (9/16-18 UNF) Male Hex Head Socket Port Plug feature O-ring seals to prevent leaks and secure connections; two fittings with two O-rings for improved sealing performance
- Application: For all oil/fuel/water/fluid/air lines
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.33 x 0.67 x 0.47 Inches
See On Amazon #14
PFCKE 8AN Male 1/2 x 20 Inverted Flare Thread Adapter Aluminum Straight Black Connector.
Asin: B0BZ416VTT
💎【Sealing】8An Flare Has A 37 Degree Sealing Angle For Enhanced Sealing..
💎【Brand Quality Assurance】 If You Are Not 100% Completely Satisfied With The Thread Adapter, Just Contact Us And We Will Refund Or Replace Your Product Immediately. If You Have Any Questions About Our Products, Please Contact Us First, Our Support Team Will Try Our Best To Help You Solve All Your Problems, Emails Are Replied Within 12 Hours..
💎【Application】Suitable For Water/Fluid/Cooler/Gas Piping, Widely Used In Fuel Piping/Fuel Pump/Transmission Cooler Fittings, Etc..
💎【Size】8An Male Coupler Thread Size 3/4-16 Unf With 1/2" X 20 Male Thread Inverted..
Features
- Material Made of aluminum alloy 6061-T6 with anodized surface for corrosion resistance.
- Size 8AN male coupler thread size 3/4-16 UNF with 1/2 x 20 male thread inverted.
- Sealing 8AN flare has a 37 degree sealing angle for enhanced sealing.
- Application Suitable for water/fluid/cooler/gas piping, widely used in fuel piping/fuel pump/transmission cooler fittings, etc.
- Brand Quality Assurance If you are not 100% completely satisfied with the thread adapter, just contact us and we will refund or replace your product immediately. If you have any questions about our products, please contact us first, our support team will try our best to help you solve all your problems, emails are replied within 12 hours.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
See On Amazon #15
10AN 45 Degree Push Lock Hose Fitting Barb End Adapter For Rubber Fuel Line Oil Fuel Cooler Kits Reusable Hose Adaptor Anodized Aluminum Alloy Black.
Asin: B0CXT7W43Y | Model: YLDCJT-10AN-45-1 | PartNumber: YLDCJT-10AN-45-1
No Leakage：1. Push-On With 37-Degree Butt Angle For Excellent Sealing 2. Push-On Locking Coupling Flange Prevents Hose From Sliding And Prevents Leakage 3. Aluminum Hose Cover Prevents Hose From Sliding And Protects Hose End Without Snagging..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Applicable: For All Oil/Fuel/Water/Fluid/Air/Gas/Coolant Lines, Cars With Turbo Conversion, Oil Cooling Radiator Installation Connections. Not Applicable To Ptfe Hose/E85 Hose/Nylon Or Stainless Steel Braided Hose..
Size: 10An (7/8-14 Unf) Female Flare To 5/8" In. Barb, 45 Degree Straight. For Use With 5/8-Inch Id Push-On Rubber Fuel Hoses. Push-Lock Hose Fittings Feature A One-Piece Design That Eliminates Two Brazed Fittings, Minimizes Potential Leaks, And Improves Flow And Appearance..
Features
- HIGH QUALITY MATERIAL: Made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse. Working Temperature: -40 to +248 (-40 to +120 ) ,Max Working Pressure: 2000 PSI.
- SIZE: 10AN (7/8-14 UNF) female flare to 5/8 in. barb, 45 degree straight. For use with 5/8-inch ID push-on rubber fuel hoses. Push-lock hose fittings feature a one-piece design that eliminates two brazed fittings, minimizes potential leaks, and improves flow and appearance.
- NO LEAKAGE 1. Push-on with 37-degree butt angle for excellent sealing 2. Push-on locking coupling flange prevents hose from sliding and prevents leakage 3. Aluminum hose cover prevents hose from sliding and protects hose end without snagging.
- APPLICABLE: For all oil/fuel/water/fluid/air/gas/coolant lines, cars with turbo conversion, oil cooling radiator installation connections. Not applicable to PTFE hose/E85 hose/nylon or stainless steel braided hose.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 4.06 x 4.06 x 0.98 Inches
See On Amazon #16
6AN Male Flare to 5/16"Hardline Compression Fitting Adapter Straight Connector Aluminum Alloy Black Anodized.
Asin: B0CXT6V61R | Model: YJT6AN516-1 | PartNumber: YJT6AN516-1
Features: An Female Side Features Industry Standard An / Jic Flared 37-Degree Sealing Surface，Recommend An Adjustable Wrench To Tighten It，Maximum Working Pressure: 4000Psi, Working Temperature: -65°F To 252°F..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Widely Used: 6An Male Flare To 5/16" Hard Pipe Fitting Adapter For Widely Used In Fuel Delivery, Fuel System, Engine Modification, Etc..
Size Information: Compatible With Hard Pipe Only. 6An To 5/16 Inch, 6An Has A Thread Size Of 9/16-18 Unf For Hard Pipe With A 5/16 Inch Od, Please Measure Before Purchasing..
Features
- DURABLE MATERIALS: 6AN hard pipe fittings are made of 6061 T6 aircraft grade lightweight aluminum and brass ferrules with black anodized surface. Wear-resistant, corrosion-resistant, sturdy and resistant to deformation.
- SIZE INFORMATION: COMPATIBLE WITH HARD PIPE ONLY. 6AN to 5/16 inch, 6AN has a thread size of 9/16-18 UNF for hard pipe with a 5/16 inch OD, please measure before purchasing.
- Features: AN female side features industry standard AN / JIC flared 37-degree sealing surface Recommend AN adjustable wrench to tighten it Maximum working pressure: 4000PSI, Working temperature: -65 F to 252 F.
- WIDELY USED: 6AN male flare to 5/16 hard pipe fitting adapter for widely used in fuel delivery, fuel system, engine modification, etc.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.55 x 1.73 x 0.67 Inches
See On Amazon #17
6AN Straight Female Swivel Push-on/Lock Hose Barb Fuel Oil Line Fitting Anodized Aluminum Alloy Black 2 Pack (6AN-0 Degree)
Asin: B0CXT63N2D | Model: YLDCJT-6AN-0 | PartNumber: YLDCJT-6AN-0
No Leakage：1. Push-On With 37-Degree Butt Angle For Excellent Sealing 2. Push-On Locking Coupling Flange Prevents Hose From Sliding And Prevents Leakage 3. Aluminum Hose Cover Prevents Hose From Sliding And Protects Hose End Without Snagging..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Applicable: For All Oil/Fuel/Water/Fluid/Air/Gas/Coolant Lines, Cars With Turbo Conversion, Oil Cooling Radiator Installation Connections. Not Applicable To Ptfe Hose/E85 Hose/Nylon Or Stainless Steel Braided Hose..
Size:An6 (9/16-18 Unf) Female Flare To 3/8 In. Barb, 0 Degree Straight. For Use With 3/8-Inch Id Push-On Rubber Fuel Hoses. Push-Lock Hose Fittings Feature A One-Piece Design That Eliminates Two Brazed Fittings, Minimizes Potential Leaks, And Improves Flow And Appearance..
Features
- HIGH QUALITY MATERIAL: Made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse. Working Temperature: -40 to +248 (-40 to +120 ) ,Max Working Pressure: 2000 PSI.
- SIZE:AN6 (9/16-18 UNF) female flare to 3/8 in. barb, 0 degree straight. For use with 3/8-inch ID push-on rubber fuel hoses. Push-lock hose fittings feature a one-piece design that eliminates two brazed fittings, minimizes potential leaks, and improves flow and appearance.
- NO LEAKAGE 1. Push-on with 37-degree butt angle for excellent sealing 2. Push-on locking coupling flange prevents hose from sliding and prevents leakage 3. Aluminum hose cover prevents hose from sliding and protects hose end without snagging.
- APPLICABLE: For all oil/fuel/water/fluid/air/gas/coolant lines, cars with turbo conversion, oil cooling radiator installation connections. Not applicable to PTFE hose/E85 hose/nylon or stainless steel braided hose.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 1.77 x 1.77 x 0.75 Inches
See On Amazon #18
8AN Straight Female Swivel Push-on/Lock Hose Barb Fuel Oil Line Fitting Anodized Aluminum Alloy Black 1 Pack (8AN-0 Degree)
Asin: B0CXT5ZPYX | Model: YLDCJT-8AN-0-1 | PartNumber: YLDCJT-8AN-0-1
No Leakage：1. Push-On With 37-Degree Butt Angle For Excellent Sealing 2. Push-On Locking Coupling Flange Prevents Hose From Sliding And Prevents Leakage 3. Aluminum Hose Cover Prevents Hose From Sliding And Protects Hose End Without Snagging..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Applicable: For All Oil/Fuel/Water/Fluid/Air/Gas/Coolant Lines, Cars With Turbo Conversion, Oil Cooling Radiator Installation Connections. Not Applicable To Ptfe Hose/E85 Hose/Nylon Or Stainless Steel Braided Hose..
Size: An8 (3/4-16 Unf) Female Flare To 1/2 In. Barb, 0 Degree Straight. For Use With 1/2-Inch Id Push-On Rubber Fuel Hoses. Push-Lock Hose Fittings Feature A One-Piece Design That Eliminates Two Brazed Fittings, Minimizes Potential Leaks, And Improves Flow And Appearance..
Features
- HIGH QUALITY MATERIAL: Made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse. Working Temperature: -40 to +248 (-40 to +120 ) ,Max Working Pressure: 2000 PSI.
- SIZE: AN8 (3/4-16 UNF) female flare to 1/2 in. barb, 0 degree straight. For use with 1/2-inch ID push-on rubber fuel hoses. Push-lock hose fittings feature a one-piece design that eliminates two brazed fittings, minimizes potential leaks, and improves flow and appearance.
- NO LEAKAGE 1. Push-on with 37-degree butt angle for excellent sealing 2. Push-on locking coupling flange prevents hose from sliding and prevents leakage 3. Aluminum hose cover prevents hose from sliding and protects hose end without snagging.
- APPLICABLE: For all oil/fuel/water/fluid/air/gas/coolant lines, cars with turbo conversion, oil cooling radiator installation connections. Not applicable to PTFE hose/E85 hose/nylon or stainless steel braided hose.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 1.97 x 1.97 x 0.87 inches
See On Amazon #19
6AN Male Flare to5/16 Hose Barb Straight Fitting Adapter, Push Hose Barb Fitting Adapter- 2PCS Aluminum Black Anodized.
Asin: B0CXT55CLF | Model: DGZJT-6AN-516 | PartNumber: DGZJT-6AN-516
Wide Application:Barb Adapters For Automotive Applications Including Fuel, Oil, Fluid, Diesel Or Water Lines, Compressed Air Systems, Power Steering Return Lines, Adding Fpr To Fuel Lines, And Brake Line Fittings On Race Cars..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
No Leakage：Aggressive, Leak-Free Seal Design Features A 37-Degree Sealing Angle To Ensure A Tight Seal At Maximum Working Pressure..
Size Information:An6 (9/16-18 Unf) Male Flare To 5/16 Inch Od Push On Hose Barb Adpater, Work Temperture Range: -60 To +120 Degree F, Max Working Pressure Is 1000 Psi..
Features
- HIGH QUALITY MATERIAL: 6AN Male Flare Connection 5/16" NPT Tube Fitting Adapters are made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse.
- SIZE INFORMATION:AN6 (9/16-18 UNF) male flare to 5/16 inch OD push on hose barb adpater, work temperture range: -60 to +120 degree F, max working pressure is 1000 PSI.
- WIDE APPLICATION:Barb adapters for automotive applications including fuel, oil, fluid, diesel or water lines, compressed air systems, power steering return lines, adding FPR to fuel lines, and brake line fittings on race cars.
- NO LEAKAGE Aggressive, leak-free seal design features a 37-degree sealing angle to ensure a tight seal at maximum working pressure.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 1.69 x 1.69 x 0.75 inches
See On Amazon #20
8AN Male Flare Blanking Plug Fitting Adapter Hex Head Plug 3/4-16 UNF Black Aluminum Anodized Pack of 1 .
Asin: B0CXT51JDN | Model: YDT8AN3-4-1 | PartNumber: YDT8AN3-4-1
Applications: 8An Male Flare Hex Plug Seal Nuts Are Widely Used In Fuel Rails, Oil Coolers, Fuel Pumps, Fuel Pressure Regulators, Fuel Filters, Radiators And More. Suitable For Fluids, Oils, Lubricants, Diesel, Fuels, Etc..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Sealing:8An (3/4-16 Unf) Male Flare Plug 37 Degree Design, 37º Sealing Angle Ensures Reliable Sealing At Maximum Working Pressure, Reusable And Long Service Life..
Dimensional Information: 8An Male Flare Threaded Hex Head Plugs Are 3/4-16 Unf, Maximum Working Pressure: 1500 Psi. Operating Temperature: -65°F To +252°F (-53°C To +122°C). Ensures Durability And Reliability In A Variety Of Applications..
Features
- Material: 8AN (3/4-16 UNF) male flare plug. Manufactured from lightweight 6061-T6 aluminum with an anodized finish for strength, durability and corrosion resistance.
- Dimensional Information: 8AN male flare threaded hex head plugs are 3/4-16 UNF, Maximum Working Pressure: 1500 PSI. Operating Temperature: -65 F to +252 F (-53 C to +122 C). Ensures durability and reliability in a variety of applications.
- APPLICATIONS: 8AN Male Flare Hex Plug Seal Nuts are widely used in fuel rails, oil coolers, fuel pumps, fuel pressure regulators, fuel filters, radiators and more. Suitable for fluids, oils, lubricants, diesel, fuels, etc.
- SEALING:8AN (3/4-16 UNF) male flare plug 37 degree design, 37 sealing angle ensures reliable sealing at maximum working pressure, reusable and long service life.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.67 x 0.91 x 0.83 Inches
See On Amazon #21
12AN 45 Degree Push Lock Hose Fitting Barb End Adapter For Rubber Fuel Line Oil Fuel Cooler Kits Reusable Hose Adaptor Anodized Aluminum Alloy Black.
Asin: B0CXT4HB36 | Model: YLDCJT-12AN-45-1 | PartNumber: YLDCJT-12AN-45-1
No Leakage：1. Push-On With 37-Degree Butt Angle For Excellent Sealing 2. Push-On Locking Coupling Flange Prevents Hose From Sliding And Prevents Leakage 3. Aluminum Hose Cover Prevents Hose From Sliding And Protects Hose End Without Snagging..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Applicable: For All Oil/Fuel/Water/Fluid/Air/Gas/Coolant Lines, Cars With Turbo Conversion, Oil Cooling Radiator Installation Connections. Not Applicable To Ptfe Hose/E85 Hose/Nylon Or Stainless Steel Braided Hose..
Size: 12An (1-1/16X12 Unf) Female Flare To 3/4" In. Barb, 45 Degree Straight. For Use With 3/4-Inch Id Push-On Rubber Fuel Hoses. Push-Lock Hose Fittings Feature A One-Piece Design That Eliminates Two Brazed Fittings, Minimizes Potential Leaks, And Improves Flow And Appearance..
Features
- HIGH QUALITY MATERIAL: Made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse. Working Temperature: -40 to +248 (-40 to +120 ) ,Max Working Pressure: 2000 PSI.
- SIZE: 12AN (1-1/16x12 UNF) female flare to 3/4 in. barb, 45 degree straight. For use with 3/4-inch ID push-on rubber fuel hoses. Push-lock hose fittings feature a one-piece design that eliminates two brazed fittings, minimizes potential leaks, and improves flow and appearance.
- NO LEAKAGE 1. Push-on with 37-degree butt angle for excellent sealing 2. Push-on locking coupling flange prevents hose from sliding and prevents leakage 3. Aluminum hose cover prevents hose from sliding and protects hose end without snagging.
- APPLICABLE: For all oil/fuel/water/fluid/air/gas/coolant lines, cars with turbo conversion, oil cooling radiator installation connections. Not applicable to PTFE hose/E85 hose/nylon or stainless steel braided hose.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 4.41 x 4.41 x 1.18 Inches
See On Amazon #22
4AN Male Flare Blanking Plug Fitting Adapter Hex Head Plug 7/16-20 UNF Black Aluminum Anodized Pack of 1 .
Asin: B0CXT4FHSG | Model: YDT4AN7-16 | PartNumber: YDT4AN7-16
Applications: 4An Male Flare Hex Plug Seal Nuts Are Widely Used In Fuel Rails, Oil Coolers, Fuel Pumps, Fuel Pressure Regulators, Fuel Filters, Radiators And More. Suitable For Fluids, Oils, Lubricants, Diesel, Fuels, Etc..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Sealing: 4An (7/16-20 Unf) Male Flare Plug 37 Degree Design, 37º Sealing Angle Ensures Reliable Sealing At Maximum Working Pressure, Reusable And Long Service Life..
Dimensional Information: 4An Male Flare Threaded Hex Head Plugs Are 7/16-20 Unf, Maximum Working Pressure: 1500 Psi. Operating Temperature: -65°F To +252°F (-53°C To +122°C). Ensures Durability And Reliability In A Variety Of Applications..
Features
- Material: 4AN (7/16-20 UNF) male flare plug. Manufactured from lightweight 6061-T6 aluminum with an anodized finish for strength, durability and corrosion resistance.
- Dimensional Information: 4AN male flare threaded hex head plugs are 7/16-20 UNF, Maximum Working Pressure: 1500 PSI. Operating Temperature: -65 F to +252 F (-53 C to +122 C). Ensures durability and reliability in a variety of applications.
- APPLICATIONS: 4AN Male Flare Hex Plug Seal Nuts are widely used in fuel rails, oil coolers, fuel pumps, fuel pressure regulators, fuel filters, radiators and more. Suitable for fluids, oils, lubricants, diesel, fuels, etc.
- SEALING: 4AN (7/16-20 UNF) male flare plug 37 degree design, 37 sealing angle ensures reliable sealing at maximum working pressure, reusable and long service life.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.55 x 0.79 x 0.55 Inches
See On Amazon #23
6AN Male Flare Blanking Plug Fitting Adapter Hex Head Plug 9/16-18 UNF Black Aluminum Anodized Pack of 2 .
Asin: B0CXT4BVTV | Model: YDT6AN9-16-2 | PartNumber: YDT6AN9-16-2
Applications: 6An Male Flare Hex Plug Seal Nuts Are Widely Used In Fuel Rails, Oil Coolers, Fuel Pumps, Fuel Pressure Regulators, Fuel Filters, Radiators And More. Suitable For Fluids, Oils, Lubricants, Diesel, Fuels, Etc..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Sealing:6An (9/16-18 Unf) Male Flare Plug 37 Degree Design, 37º Sealing Angle Ensures Reliable Sealing At Maximum Working Pressure, Reusable And Long Service Life..
Dimensional Information: 6An Male Flare Threaded Hex Head Plugs Are 9/16-18 Unf, Maximum Working Pressure: 1500 Psi.Operating Temperature: -65°F To +252°F (-53°C To +122°C). Ensures Durability And Reliability In A Variety Of Applications..
Features
- Material: 6AN (9/16-18 UNF) male flare plug. Manufactured from lightweight 6061-T6 aluminum with an anodized finish for strength, durability and corrosion resistance.
- Dimensional Information: 6AN male flare threaded hex head plugs are 9/16-18 UNF, Maximum Working Pressure: 1500 PSI.Operating Temperature: -65 F to +252 F (-53 C to +122 C). Ensures durability and reliability in a variety of applications.
- APPLICATIONS: 6AN Male Flare Hex Plug Seal Nuts are widely used in fuel rails, oil coolers, fuel pumps, fuel pressure regulators, fuel filters, radiators and more. Suitable for fluids, oils, lubricants, diesel, fuels, etc.
- SEALING:6AN (9/16-18 UNF) male flare plug 37 degree design, 37 sealing angle ensures reliable sealing at maximum working pressure, reusable and long service life.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.55 x 0.79 x 0.67 Inches
See On Amazon #24
6AN Male Flare to M16x1.5 O Ring Steering Bump Tube Adapter,Seal Power Steering Adapter Fitting Connector Aluminum Black Anodized.
Asin: B0CXT2M498 | Model: ATJT-M16*15 | PartNumber: ATJT-M16*15
Sealing: A 37-Degree Angle Seal On The An Side Of The Flare And An O-Ring Seal On The Metric Thread Side Ensure A Tight Seal At Maximum Working Pressure..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Application: Designed For Newer Gm Power Steering Boxes That Utilize O-Ring Style Fittings For High Pressure Power Steering, Widely Used In Fuel Filters, Power Steering Etc.
Size Information：6An Is 9/16-18 Unf And That Of Metric Side Is M16x1.5Mm，Working Pressure: 1500Psi; Working Temperature: -22°F To 248°F..
Features
- HIGH QUALITY MATERIAL: 6AN Male Flare to M16x1.5 O Ring Steering Bump Tube Adapter are made of high quality lightweight 6061-T6 aerospace grade material with anodized surface, durable, corrosion-resistant, and strong for long term reuse.
- SIZE INFORMATION 6AN is 9/16-18 UNF and that of metric side is M16x1.5mm Working pressure: 1500PSI; Working temperature: -22 F to 248 F.
- SEALING: A 37-degree angle seal on the AN side of the flare and an o-ring seal on the metric thread side ensure a tight seal at maximum working pressure.
- APPLICATION: Designed for newer GM power steering boxes that utilize o-ring style fittings for high pressure power steering, Widely used in fuel filters, Power steering etc
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 1.61 x 1.61 x 0.75 Inches
See On Amazon #25
6AN Male Flare to -6 Female Swivel with 1/8 NPT Gauge Port Fuel Pressure Gauge Take Off Fitting Adapter Anodized Black. 2PCS
Asin: B0CXT22QYW | Model: STJT6AN1-8 | PartNumber: STJT6AN1-8
Sealing: The An Thread Of The Flare Is Sealed By A 37 Degree Angle And The Npt Is Sealed With A 60 Degree Tapered.It Is Highly Recommended To Use Sealant Or Ptfe (Polytetrafluoroethylene Tape) At The Npt Port..
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Application: Widely Usedin Airline, Transmission Cooler Line /Fuelpressure Regulator Eto.
Size Information：An6 Male To -6 Female With 1/8" Npt Gauge/Gage Port, The Thread Size Of The 6An Is (9/16-18) Unf Working Pressure: 1500Psi,Working Temperature: -40°F To 250°F..
Features
- PREMIUM QUALITY MATERIALS: Constructed of high quality, lightweight 6061-T6 aerospace grade materials with an anodized surface for durability, corrosion resistance, strength and reusability for long term use.
- SIZE INFORMATION AN6 Male to -6 Female with 1/8 NPT Gauge/Gage Port, the thread size of the 6AN is (9/16-18) UNF Working pressure: 1500PSI,working temperature: -40 F to 250 F.
- SEALING: The AN thread of the flare is sealed by a 37 degree angle and the NPT is sealed with a 60 degree tapered.It is highly recommended to use sealant or PTFE (polytetrafluoroethylene tape) at the NPT port.
- Application: Widely usedin airline, transmission cooler line /fuelpressure regulator eto
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.55 x 1.89 x 0.87 Inches
See On Amazon #26
6AN Female to 3/8" NPT Male Swivel Fitting Union Straight Aluminum Anodized Black
Asin: B0CXSYN36Q | Model: XZJT-6AN-38-1 | PartNumber: XZJT-6AN-38-1
Perfect Design: Leak-Free Sealing Design, 37 Degree Sealing Angle Ensures A Tight Seal At Maximum Working Pressure, 360° Swivel Adapter Fittings Are Easy To Install And The Angle Is Easier To Adjust. Ideal For Any Liquid Or Gas Application Requiring High Flow An To Npt Swivel Fittings. Removable And Reusable.
Service：Pfcke Aims At Providing You With Better Products And Services. If You Have Any Questions Or Concerns, You Can Contact Us First And Your Problems Will Be Solved With Our Support..
Wide Applications: Suitable For All Oil/Turbo Fuel Lines/Rail Pump Injector Fittings, Universal For Braided Fuel Lines (Hoses), Oil Lines, Fuel Lines, Water Lines, Fluid Lines And Air Lines..
Size Information：6An (9/16-18Unf) Female To 3/8" Npt Tapered Pipe Threads，Working Pressure: 1500Psi; Working Temperature: -65º F To 252º F.
Features
- PREMIUM QUALITY MATERIALS: 6AN Female to 3/8" NPT Male Swivel Fittings Constructed of high quality, lightweight 6061-T6 aerospace grade materials with an anodized finish for durability, corrosion resistance, strength and reusability for long term use.
- SIZE INFORMATION 6AN (9/16-18UNF) female to 3/8 NPT tapered pipe threads Working pressure: 1500PSI; Working temperature: -65 F to 252 F
- PERFECT DESIGN: leak-free sealing design, 37 degree sealing angle ensures a tight seal at maximum working pressure, 360 swivel adapter fittings are easy to install and the angle is easier to adjust. Ideal for any liquid or gas application requiring high flow AN to NPT swivel fittings. Removable and reusable
- WIDE APPLICATIONS: Suitable for all oil/turbo fuel lines/rail pump injector fittings, universal for braided fuel lines (hoses), oil lines, fuel lines, water lines, fluid lines and air lines.
- SERVICE PFCKE aims at providing you with better products and services. If you have any questions or concerns, you can contact us first and your problems will be solved with our support.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 1.54 x 1.54 x 0.67 Inches
See On Amazon #27
PFCKE 6 PCS NEW Clutch Roller for Tundra Renegade Summit GSX GTX MXZ, 2008-2022 Ski-Doo REV-XP, XS, XR, XM, Gen4 Compatible with 417127016
Asin: B0C3B22C2K | Model: PSK-LHQ6 | PartNumber: PSK-LHQ6
💎 [Features] The Clutch Roller Uses Pei Material Imported From Germany, Which Has Excellent Mechanical Properties, High And Low Temperature Resistance And Wear Resistance, Making The Engine Speed Very Stable And The Clutch Action More Smooth..
💎 [After-Sales Service] If You Have Any Problem, Please Contact Us Immediately By Email, We Will Reply You Within 12 Hours To Solve The Problem For You..
💎 [Package Included] You Will Get 6 Clutch Rollers.
💎 [Replacement Number] Replacement For Original Number: 417127016..
Features
- [Extensive] Clutch Hard Fiber Torsion Roller for 2008-2022 Ski-Doo REV-XP, XS, XR, XM, Gen4
- [Replacement number] Replacement for original number: 417127016.
- [Features] The clutch roller uses PEI material imported from Germany, which has excellent mechanical properties, high and low temperature resistance and wear resistance, making the engine speed very stable and the clutch action more smooth.
- [Package Included] You will get 6 clutch rollers
- [After-sales service] If you have any problem, please contact us immediately by email, we will reply you within 12 hours to solve the problem for you.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.61 x 0.87 x 0.87 Inches
See On Amazon #28
PFCKE 4 PCS NEW Clutch Roller for Tundra Renegade Summit GSX GTX MXZ, 2008-2022 Ski-Doo REV-XP, XS, XR, XM, Gen4 Compatible with 417127016
Asin: B0C39ZKGRQ | Model: PSK-LHQ4 | PartNumber: PSK-LHQ4
💎 [Features] The Clutch Roller Uses Pei Material Imported From Germany, Which Has Excellent Mechanical Properties, High And Low Temperature Resistance And Wear Resistance, Making The Engine Speed Very Stable And The Clutch Action More Smooth..
💎 [After-Sales Service] If You Have Any Problem, Please Contact Us Immediately By Email, We Will Reply You Within 12 Hours To Solve The Problem For You..
💎 [Package Included] You Will Get 4 Clutch Rollers.
💎 [Replacement Number] Replacement For Original Number: 417127016..
Features
- [Extensive] Clutch Hard Fiber Torsion Roller for 2008-2022 Ski-Doo REV-XP, XS, XR, XM, Gen4
- [Replacement number] Replacement for original number: 417127016.
- [Features] The clutch roller uses PEI material imported from Germany, which has excellent mechanical properties, high and low temperature resistance and wear resistance, making the engine speed very stable and the clutch action more smooth.
- [Package Included] You will get 4 clutch rollers
- [After-sales service] If you have any problem, please contact us immediately by email, we will reply you within 12 hours to solve the problem for you.
- See more on Amazon...
Brand: PFCKE | Manufacturer: PFCKE
Dimensions: 0.61 x 0.87 x 0.87 Inches
See On Amazon