PGFUN - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
PGFUN CNC 3D Touch Probe Upgraded XYZ Axis Anti-roll Edge Finder Waterproof 3 Coordinate Measuring Sensor Kit with 6mm Shank & 6.5 Ft Cable, Compatible with Mach3 (Edge Finder-NO)
Asin: B0B3XMFDX5 | Model: TR0041_NO | PartNumber: TR0041_NO | Ean: 0774491728667 | UPC: 774491728667
Application: Theoretically It Can Work With Mach3, Mach4, Dynamotion, Linuxcnc, Uccnc, Centroid Cnc Or Any Other Cnc Control Software With A Probing Routine And A Breakout Board That Will Accept 3-Port Probe Input. (Contact Your Software, And Controller Manufacturer Or Lookup Forums For Probe Wiring And Connections).
Package Include: 3D Touch Probe X 1, Cable X 2 M/ 6.5Ft, Allen Wrench X 1, Straight Probe Tip X 1, Wire Connector Kit X 1 (To Solve The Lack Of Control Board Wiring Ports And Extend The Wire )..
Upgraded Digitizing Cnc Touch Probe: The Probe Uses High-Quality Electronics For True High Measurement Precision And High Repeatability, The Fine Frosted Black Oxidized Aluminum Alloy With A Flat Surface Anti-Roll/Non-Round Shaped Design, Which Makes It Looks Great And Protects The Touch Probe Well From Dropping. Besides, This Tool Can Be Converted To A Tool Setter By A Tool Setter Base And Flat Tip..
Main Specs: Power: Dc5-24V, Npn-No Wiring ( High-Level Io Signal Output When Powered And Turns To Low-Level Signal Output When Triggered), Repeatability Accuracy: 0.01 Mm/ 0.0004 In, Feedrate: 50-200 Mm/Min, Over Travel Protection Distance: X- ±4Mm/0.16 In, Y- ±4Mm/ 0.16 In, Z- 2Mm/ 0.08In, Xy Axis Trigger Force: 0.5-0.82N, Z Axis Trigger Force: 2.7N. (Note: Ensure The Sensitivity Of The Tool Setter Is Higher Than This Edge Finder/Trigger Force Less Than 2.7N If Working With A Tool Setter).
Features
- This 3 coordinate XYZ axis CNC probe is designed for wide DIY cnc applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.( Tips: it's developed for DIY application, not recommended for industrial use)
- Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- 4mm/0.16 in, Y- 4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it looks great and protects the touch probe well from dropping. Besides, This tool can be converted to a tool setter by a tool setter base and flat tip.
- Package Include: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, straight probe tip x 1, wire connector kit x 1 (to solve the lack of control board wiring ports and extend the wire ).
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 2.64 x 1.30 x 1.30 Inches | Weight: 0.12 Kilograms
See On Amazon #2
PGFUN 10:1 Right Angle Worm Gearbox 90 Angle Drive Steering Gear Device 20T Reduction Gearbox Simple Mechanical DIY Module with 8mm Shaft
Asin: B09W9NTW3F | Model: TYXC-0016_1:10_8 | PartNumber: TYXC-0016_1:10_8 | Ean: 0771077758797 | UPC: 771077758797
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gear, Can Not Used For High Torque And High Rotating Speed Cnc Application..
Material: Aluminum Alloy & #45 Steel & Copper Gear, Overall Size: 82 X 82 X 50 Mm..
Specification: 20 Teeth, 8Mm Shaft, 1 Input Shaft Drive 1 Right Angle Steering Output Shafts..
Features
- 10:1 Right Angle Worm Gearbox for Simple DIY Mechanical Application.
- Specification: 20 teeth, 8mm shaft, 1 input shaft drive 1 right angle steering output shafts.
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy & #45 Steel & Copper gear, Overall Size: 82 x 82 x 50 mm.
- Note: it's simple steering gear, can not used for high torque and high rotating speed CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 1.97 x 3.23 x 3.23 inches | Weight: 0.30 Kilograms
See On Amazon #3
2 Pcs Industrial Robot Control Cabinet Mode Select Key Switch for FANUC R-30IA R-30IB Control System
Asin: B0BBBDZWSC | Model: TYXR-0086 | PartNumber: TYXR-0086 | Ean: 0777723134779 | UPC: 777723134779
100% New And High Quality.
Package Includes: Cabinet Mode Select Key X 2 Pcs.
Fit For Fanuc Industial Robots With R-30Ia, R-30Ib Control System, M10ia,M10ib, M30ia, M30ib Etc..
Features
- 2 Pcs Industrial Robot Control Cabinet Mode Select Key Switch for FANUC R-30IA R-30IB Control System
- Fit for Fanuc Industial Robots with R-30IA, R-30IB Control System, M10IA,M10IB, M30IA, M30IB etc.
- 100% New and High Quality
- Package Includes: cabinet mode select key x 2 pcs
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 0.08 x 1.65 x 0.87 Inches | Weight: 0.00 pounds
See On Amazon #4
PGFUN 1:1 Right Angle Bevel Gearbox 1 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 6mm Shaft
Asin: B09V5R7TLF | Model: TYXC-0010_1-1_6 | PartNumber: TYXC-0010_1-1_6 | Ean: 0771077589391 | UPC: 771077589391
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear, Built -In Ball Bearing For Smoothly Rotating..
Note: It's Simple Steering Gear, Can Not Used For High Troque And High Rotating Speed Cnc Application..
Material: Aluminum Alloy & #45 Steel, Overall Size: 100 X 75 X 25 Mm ..
Specification: 1 Module, 20 Teeth, Bevel Gear With 2 X M4 Screw Holes, 6Mm Shaft..
Features
- 1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.
- Specification: 1 module, 20 teeth, bevel gear with 2 x M4 screw holes, 6mm shaft.
- Motor drive can be realized with coupling and belt pulley gear, built -in ball bearing for smoothly rotating.
- Material: Aluminum alloy & #45 Steel, Overall Size: 100 x 75 x 25 mm .
- Note: it's simple steering gear, can not used for high troque and high rotating speed CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 0.98 x 4.13 x 2.95 Inches | Weight: 1.30 Kilograms
See On Amazon #5
PGFUN 2 Pcs 1/4" PT x 10/30/50mm Coolant Pipe Adjustable 304 Stainless Steel Screw-in Coolant Nozzle High-Pressure Water Oil Cooling Tube for Lathe, Milling, CNC Machine (50mm)
Asin: B0B37T4BLB | Model: TYXC0038-1/4PT-50I | PartNumber: TYXC0038-1/4PT-50I | Ean: 0774491728544 | UPC: 774491728544
Multi-Size Optional: Thread ( Pt/ Npt), Screw Joint Size (1/8, 1/4, 3/8, 1/2), Pipe Length (10/30/50 Mm) Are Choosable To Meet More Different Machine Needs, You Can Choose The Exact Size Nozzle For Your Machine..
Package Includes: Coolant Nozzle X 2 Pcs..
Specification: Thread-1/4" Pt, Pipe Length-50Mm, Id- 4Mm, Od- 6Mm, Vertical Movement- 34 Degree, Horizontal Rotating:- 360 Degree..
More Flexible: Horizontal 360 Degree Rotating Adjustable And Vertical ± 34 Degree Movement Adjustable, Fit Most For Lathe, Milling , Cnc Machine, Stone Curving Mechine And Jewelry Engraving Machines That Need Water Or Oil Cooling..
Features
- High-pressure Heavy Duty Coolant Nozzle: the nozzle made of 304 stainless steel, which can bear stronger water pressure and stand stablely for precision cooling.
- More Flexible: horizontal 360 degree rotating adjustable and vertical 34 degree movement adjustable, fit most for Lathe, Milling , CNC Machine, stone curving mechine and jewelry engraving machines that need water or oil cooling.
- Multi-size Optional: thread ( PT/ NPT), screw joint size (1/8, 1/4, 3/8, 1/2), pipe length (10/30/50 mm) are Choosable to meet more different machine needs, you can choose the exact size nozzle for your machine.
- Specification: thread-1/4 PT, pipe length-50mm, ID- 4mm, OD- 6mm, vertical movement- 34 degree, horizontal rotating:- 360 degree.
- Package Includes: coolant nozzle x 2 pcs.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 0.70 x 2.20 x 0.70 Inches
See On Amazon #6
PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (12mm)
Asin: B09VGPWQSQ | Model: TYXC-0011_1.5_20_12 | PartNumber: TYXC-0011_1.5_20_12 | Ean: 0771077589667 | UPC: 771077589667
The Bevel Gear Is Made Of 45# Steel Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For Long Lifetime..
Overall Size:Φ 31.12 X 18.53 Mm.
Note: 1 Bevel Gear Only Match The Other Same Scale Gear, So 1 Set （2 Or More Gears) Should Be Replaced Together For Smoothly Drive..
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive And Other Industries That Needs Steering Drive..
Features
- Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 12mm shaft hole, M5 fixing hole, 90 degrees steering angle.
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive.
- The bevel gear is made of 45# steel features high wear-resistance, strong and durable, which takes the quenching & blackening process for long lifetime.
- Note: 1 bevel gear only match the other same scale gear, so 1 set 2 or more gears) should be replaced together for smoothly drive.
- Overall Size: 31.12 x 18.53 mm
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #7
PGFUN 10 Loops Wire Rope Isolator 304 Stainless Steel Anti-Vibration Mount Shock Absorber Damper
Asin: B09W695DJ6 | Ean: 0771077758513 | UPC: 771077758513
Multi Ways To Fix: The Isolator Comes With The Fixing Hole, Easy To Fix By Multi Fixing Methods, Suitable For Most Heavy Equipment Requiring Shock Absorption..
Material: 304 Stainless Steel Wire Rope And Plate..
Compact Wire Rope Isolators Can Be Used On Galley Components Where Motors And Fans Produce Vibrations Onto Surrounding Structures. They Can Also Be Used To Control Vibration And Thermal Expansion.
High Performance Vibration Damper: The Wire Rope Isolators Have Stainless Steel Cable And High Quality Aluminum Retaining Bars, Which Provides Excellent Vibration Isolation. The Isolators Are Corrosion Resistant, Which Makes Them Environmentally Stable And High-Performance In A Variety Of Applications. The Isolators Are Completely Unaffected By Oil, Chemicals, Abrasives, Ozone, And Temperature Extremes..
Features
- Widely Application: with versatile mounting options, crimping patterns, and size variation, helical isolator products may help your systems meet all requirements for industrial, defense, and commercial uses.
- High Performance Vibration Damper: The wire rope isolators have stainless steel cable and high quality aluminum retaining bars, which provides excellent vibration isolation. The isolators are corrosion resistant, which makes them environmentally stable and high-performance in a variety of applications. The isolators are completely unaffected by oil, chemicals, abrasives, ozone, and temperature extremes.
- Multi Ways to Fix: the isolator comes with the fixing hole, easy to fix by multi fixing methods, suitable for most heavy equipment requiring shock absorption.
- Compact wire rope isolators can be used on galley components where motors and fans produce vibrations onto surrounding structures. They can also be used to control vibration and thermal expansion
- Material: 304 stainless steel wire rope and plate.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 1.40 x 5.00 x 1.80 Inches
See On Amazon #8
PGFUN 1:1 Right Angle Tapered Bevel Gearbox Mini 1 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 8mm Shaft
Asin: B0BJVKJ175 | Model: TYXC-0046 | PartNumber: TYXC-0046 | Ean: 0777723135431 | UPC: 777723135431
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gear, Not Recommended For High Torque And High Accuracy Cnc Application..
Material: Aluminum Alloy With Sandblasting Oxidation & Stainless Steel Shaft, Overall Size: 56.2 X 30 X 56.2 Mm/ 2.2 X 1.2 X 2.2 Inch..
Specification: Built-In 1 Module 20 Teeth Bevel Gears, 8 Mm/ 0.3" Shaft, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs , Max Rotation Speed: 1500 Rpm, Backlash: 5 Degree, If 3D File(Stp) Is Needed, Free To Contact Us..
Features
- 1:1 L-shaped Right Angle Bevel Gearbox for Simple DIY Mechanical Application, 1 Input Shaft Drives 1 Short Output Shaft.
- Specification: built-in 1 module 20 teeth bevel gears, 8 mm/ 0.3 shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1500 rpm, backlash: 5 degree, if 3D file(stp) is needed, free to contact us.
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy with sandblasting oxidation & Stainless Steel Shaft, Overall Size: 56.2 x 30 x 56.2 mm/ 2.2 x 1.2 x 2.2 inch.
- Note: it's simple steering gear, not recommended for high torque and high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 1.18 x 2.20 x 2.20 Inches | Weight: 0.10 Kilograms
See On Amazon #9
PGFUN 5:1 Right Angle Worm Gearbox 90 Angle Drive Steering Gear Reducer 20T Reduction Gearbox Simple Mechanical DIY Module with 8 mm Shaft
Asin: B0CDL7TV46 | Ean: 0777723136728 | UPC: 777723136728
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gear, Can Not Used For High Troque And High Rotating Speed Cnc Application..
Material: Aluminum Alloy & #45 Steel, Overall Size: 82 X 82 X 50 Mm/ 3.23 X 3.23 X 1.97 Inch..
Specification: 20 Teeth, 8Mm Shaft, 1 Input Shaft Drive 1 Right Angle Steering Output Shaft..
Features
- 5:1 Right Angle Worm Gearbox for Simple DIY Mechanical Application, the Gearbox Reducer Comes without Self-locking Function Due to Small Reduction Ratio.
- Specification: 20 teeth, 8mm shaft, 1 input shaft drive 1 right angle steering output shaft.
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy & #45 Steel, Overall Size: 82 x 82 x 50 mm/ 3.23 x 3.23 x 1.97 inch.
- Note: it's simple steering gear, can not used for high troque and high rotating speed CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 1.97 x 3.15 x 3.15 Inches
See On Amazon #10
PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
Asin: B0CKTSB8DP | Ean: 0777723136964 | UPC: 777723136964
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gearbox, Can Not Used For High Accuracy Cnc Application..
Material: Aluminum Alloy & #45 Steel, The Input And Output Shafts Take The Blackening Or Galvanizing Process (Random), Overall Size: 90.3 X 84 X 46 Mm/ 3.6 X 3.3 X 1.8 Inch..
Specification: Built-In 1.5 Module 20 Teeth Bevel Gears, 15 Mm/ 0.6" Shaft, Max Axis Loading: 30 Kgs/ 66.1 Lbs, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs, Max Rotation Speed: 1200 Rpm, Backlash: 5 Degree, If 3D File (Stp) Is Needed, Free To Contact Us..
Features
- 1:1 L-shaped Right Angle Bevel Gearbox for Simple DIY Mechanical Application, 1 Input Shaft Drives 1 Short Output Shaft.
- Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6 shaft, Max Axis Loading: 30 kgs/ 66.1 lbs, max torque rating: 5 N.M/ 3.6 ft.lbs, max rotation speed: 1200 rpm, backlash: 5 degree, if 3D file (stp) is needed, free to contact us.
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy & #45 Steel, the input and output shafts take the blackening or galvanizing process (random), Overall Size: 90.3 x 84 x 46 mm/ 3.6 x 3.3 x 1.8 inch.
- Note: it's simple steering gearbox, can not used for high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #11
PGFUN 304 Stainless Steel Dispersing Disc 30-500mm/1.2-19.7 inch Dispersion Impeller High Speed Dispersing Machine Blade Paddle Impeller with 8mm Shaft Hole (Dia 100mm/3.9")
Asin: B09YVQFJSL | Model: TYXC-0027 Round-100 | PartNumber: TYXC-0027 Round-100 | Ean: 0771077760332 | UPC: 771077760332
Easy To Use: The Dispersion Impeller Is Able To Connect With High Speed Disperser, Handheld Electric Drill And Lab Lequid Mixer, Easy To Install And Replace..
100% Satisfication Garranty: 30 Days Free Return, Any Question, Free To Contact Us..
Specification: Stainless Steel Thickness-2Mm, Inner Hole: 8 Mm,Disc Dia-100Mm/ 3.9 Inch.
Material: It Is Made Of 304 Stainless Steel, Which Features With Strong Toughness, Corrosion Resistance, And Anti-Rust..
Features
- The dispersing disc is widely used in coatings, pigments, dyestuffs, ink, adhesives, medicine, daily chemicals, resins, pesticide, etc. It is a regular accessory for stiring equipment, like dispersing machines, grinders, pulverizers, stirer, mixers, emulsifiers, etc.
- Material: It is made of 304 stainless steel, which features with strong toughness, corrosion resistance, and anti-rust.
- Easy to Use: the Dispersion Impeller is able to connect with high speed disperser, handheld electric drill and lab lequid mixer, easy to install and replace.
- Specification: stainless steel thickness-2mm, inner hole: 8 mm,disc dia-100mm/ 3.9 inch
- 100% Satisfication Garranty: 30 days free return, any question, free to contact us.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #12
PGFUN DIY CNC 3D Digitizing Touch Probe Upgraded NPN-NC XYZ Axis Edge Finder Waterproof 3 Coordinate Measuring Sensor Kit with 6mm Shank
Asin: B0CC5BFFZW | Ean: 0777723136452 | UPC: 777723136452
Main Specs: Power: Dc5-24V, Npn-Nc Wiring (Low-Level Io Signal Output When Powered And Turns To High-Level Signal Output When Triggered), Repeatability Accuracy: 0.01 Mm/ 0.0004 In, Feedrate: 50-200 Mm/Min, Over Travel Protection Distance: X- ±4Mm/0.16 In, Y- ±4Mm/ 0.16 In, Z- 2Mm/ 0.08In, Xy Axis Trigger Force: 0.5-0.8N, Z Axis Trigger Force: 2.7N. (Note: Ensure The Sensitivity Of The Tool Setter Is Higher Than This Edge Finder/Trigger Force Less Than 2.7N If Working With A Tool Setter).
Upgraded Digitizing Cnc Touch Probe: The Probe Uses High-Quality Electronics For True High Measurement Precision And High Repeatability, The Fine Frosted Black Oxidized Aluminum Alloy With A Flat Surface Anti-Roll/Non-Round Shaped Design, Which Makes It Looks Great And Protects The Touch Probe Well From Dropping. Besides, This Tool Can Be Converted To A Tool Setter By A Tool Setter Base And Flat Tip (Plate)..
Application: Theoretically It Can Be Compatible With Most 3-Wire Probe Systems, Like Mach3, Mach4, Dynamotion, Linuxcnc, Uccnc, Grbl, Centroid Acorn, Mach Motion, Masso, Emc2, And Other Cnc Control Software With A Probing Routine And A Control Board That Will Accept Probe Input. (Contact Your Software, And Controller Manufacturer Or Lookup Forums For Probe Wiring And Connections).
Functions & Features: Fast Zero-Point Acquisitions, Surface Flatness Acquisition, Measuring Workpiece Geometries Such As Edges, Holes, Grooves, Studs, Angles And Corners, Workpiece Scanning & Digitizing..
Features
- This 3-coordinate XYZ axis CNC probe is not recommended for new DIY users, before purchasing, please make sure your machine needs an NPN-NC touch probe, rather than an NPN-NO probe, and you know how to wire and how to connect to the software or edit the scripts.
- Functions & Features: fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.
- Main Specs: power: DC5-24V, NPN-NC wiring (Low-level IO signal output when powered and turns to High-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- 4mm/0.16 in, Y- 4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.8N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Application: theoretically it can be compatible with most 3-wire probe systems, like MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, GRBL, Centroid Acorn, Mach Motion, Masso, EMC2, and other CNC control software with a probing routine and a control board that will accept probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it looks great and protects the touch probe well from dropping. Besides, This tool can be converted to a tool setter by a tool setter base and flat tip (plate).
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #13
PGFUN Hollow Rotary Actuator High Accuracy Hollow Rotating Platform Rotary Positioners, Fitting Nema 34 Stepper Motor, Substitutable for Direct Drive Motor and Cam Indexer
Asin: B09SM42CG3 | Ean: 0772467336274 | UPC: 772467336274
Equipped With Crossed Roller Bearing: Considering The Accuracy And Stability That May Be Affected By The Lateral Force From Different Directions, The High Rigidity Crossed Roller Bearing Was Adopted, Which Features High Rotational Accuracy, Stable Rotational Torque, And High Loading Capacity, Which Can Ensure The Stability And High Precision Of The Rotating Platform..
To Know More Details About This Hollow Rotary Actuator/ Turntable, Please Refer To The Content In The Following Description Section And Attached Video Show. Any Questions, Free To Contact Us..
This Dn200 Rotary Actuator Fits For Standard Nema 34 Stepper/ Servo Motor <14 Mm Shaft) In Default (Please Know That We Can Provide Different Sizes Flange To Fits Most Stepper/ Servo Motors On The Market)..
360-Degree Rotating Table With Hollow Design: It Is Easy To Position And Stay At Any Angle By Connecting With A Stepper Motor Or Servo Motor Directly, The Actuator Comes With A Photoelectric Sensor (674) Bracket To Achieve High Accuracy Position And Control, And The Hollow Design Makes It Easy To Attach The Rotating Plate And Avoid The Complex Wiring Problem..
Features
- High Accuracy Rotating Platform: 1 arcmin positioning accuracy and 15 arcmin repeated positioning accuracy, which is dramatically growing in high-precision industrial automation equipment, glue dispensing machines, the 4th or 5th axis of machine tools, packing machines, photoelectric and visual inspection equipment, indexing plate, laser printer, sorting machine, robot joint, etc.
- 360-Degree Rotating Table with Hollow Design: it is easy to position and stay at any angle by connecting with a stepper motor or servo motor directly, the actuator comes with a photoelectric sensor (674) bracket to achieve high accuracy position and control, and the hollow design makes it easy to attach the rotating plate and avoid the complex wiring problem.
- Equipped with Crossed Roller Bearing: considering the accuracy and stability that may be affected by the lateral force from different directions, the high rigidity crossed roller bearing was adopted, which features high rotational accuracy, stable rotational torque, and high loading capacity, which can ensure the stability and high precision of the rotating platform.
- This DN200 Rotary Actuator Fits for Standard Nema 34 Stepper/ Servo Motor <14 mm shaft) in Default (Please Know That We Can Provide Different Sizes Flange to Fits Most Stepper/ Servo Motors on the Market).
- To Know More Details About This Hollow Rotary Actuator/ Turntable, Please Refer to the Content in the Following Description Section and Attached Video Show. Any Questions, Free to Contact Us.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 5.24 x 9.61 x 78.78 inches | Weight: 17.64 Pounds
See On Amazon #14
PGFUN 7" Industrial Human Machine Interface (HMI) Panel Protective Cover High Transparency PLC Programming Controller LCD Touch Screen Box
Asin: B0B2LN3635 | Ean: 0774491728469 | UPC: 774491728469
0-120 Degree Arbitrary Position Stop: The Box Takes The Upgraded Hinge, It Supports Horizontal, Vertical, Incline Fixing Platform, More Flexible For Different Machines..
Material: The Hmi Cover Made Of High Strength Pc-Abs, Which Is Available To Afford Wheel Rolling Test.
Specification: Overall Size- 220X180x24 Mm/8.7X7.1X 0.9 Inch, Middle Cutout Size- 192X138 Mm/ 7.6X 5.4 Inch, Inner Size- 216X161x2 Mm/ 8.5X 6.3X 0.8 Inch .
Fit For Hmi Panel:Smart 700 Ie V3, Nb7w-Tw00b, Nb7w-Tw01b, Nb7w-Tw11b, Dop-107Bv, Dop-107Cw, Dop-107Ev, Dop-107Eg, Tg765-Mj, Tg765-Xt, Tg765-Xt-C, Tg765s-Mt, Tg765s-Et, Tg765s-Mj, Tg765-Uj, Tg765s-Uj, Th765, Te765, Tg756s, Cmt3072, Emb3070b, Mt6071ie, Mt8071ie, Mt6071ip, Mt8071ip, Tk8071ip, Tk6071ip, Tk6071iq, Mt4414te, Mt4414-Cay, Mt4414t, Mt4434t, Mt4434te.
Features
- Industrial HMI Panel Protector: the HMI is widely used in industrial automation, medical, advertising, education etc, this high transparency and strengthened PLC programming controller LCD touch screen shell to protect the HMI panel and serve longer.
- Fit for HMI Panel:smart 700 IE V3, NB7W-TW00B, NB7W-TW01B, NB7W-TW11B, DOP-107BV, DOP-107CW, DOP-107EV, DOP-107EG, TG765-MJ, TG765-XT, TG765-XT-C, TG765S-MT, TG765S-ET, TG765S-MJ, TG765-UJ, TG765S-UJ, TH765, TE765, TG756S, CMT3072, EMB3070B, MT6071IE, MT8071IE, MT6071IP, MT8071IP, TK8071IP, TK6071IP, TK6071IQ, MT4414TE, MT4414-CAY, MT4414T, MT4434T, MT4434TE
- 0-120 degree Arbitrary Position Stop: the box takes the upgraded hinge, it supports horizontal, vertical, incline fixing platform, more flexible for different machines.
- Specification: Overall Size- 220x180x24 mm/8.7x7.1x 0.9 inch, Middle Cutout Size- 192x138 mm/ 7.6x 5.4 inch, Inner Size- 216x161x2 mm/ 8.5x 6.3x 0.8 inch
- Material: the HMI Cover made of high strength PC-ABS, which is available to afford wheel rolling test
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #15
PGFUN 2 Pcs 1M 20 Teeth 5/6/8mm Shaft Hole Tapered Bevel Gear 1:1# 45 Steel 1 Module 90 Degree Steering Gear with M3 Fixing Hole (6 mm)
Asin: B09VFJNPQD | Model: TYXC-0011_1_20_6 | PartNumber: TYXC-0011_1_20_6 | Ean: 0771077589544 | UPC: 771077589544
The Bevel Gear Is Made Of 45# Steel Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For Long Lifetime..
Overall Size:Φ 21.1 X 14.4 Mm.
Note: 1 Bevel Gear Only Match The Other Same Scale Gear, So 1 Set （2 Or More Gears) Should Be Replaced Together For Smoothly Drive..
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive And Other Industries That Needs Steering Drive..
Features
- Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 6mm shaft hole, M5 fixing hole, 90 degrees steering angle.
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive.
- The bevel gear is made of 45# steel features high wear-resistance, strong and durable, which takes the quenching & blackening process for long lifetime.
- Note: 1 bevel gear only match the other same scale gear, so 1 set 2 or more gears) should be replaced together for smoothly drive.
- Overall Size: 21.1 x 14.4 mm
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 0.59 x 0.79 x 0.79 Inches
See On Amazon #16
Upgraded Richauto CNC Controller DSP A11E 3 Axis Motion Control System for CNC Router, Engraver, Cutting Machine, Compatible with TYPE3, ARTCAM, Mastercam, ProE, UG Software.(English Version)
Asin: B0CLB3TP1R | Model: DSP-A11 E | PartNumber: DSP-A11 E | Ean: 0777723136995 | UPC: 777723136995
Customizable I/O Interfaces Provide A Wide Development Platform, There Are 8 Input And Output Signals In Every Basic I / O Signal Node, The Expansion I / O Nodes Can Be Expanded To 32 Input And Output Signals, Which Is Convenient For Secondary Development And Meets The Needs Of Different Machine, Project, And Application..
Dsp A11e ( English Version) Is The Upgraded Dsp 0501 Three-Axis Linkage Motion Controller, With More Reliable Functions, The Upgraded A1x Series Controller Contains A11, A12, And A18 Controllers, If You Do Not Know The Difference Between The Controllers, Please Contact Us First In Case Of Purchasing By Mistake..
The System Supports High Subdivide Controlling, To Make The Motor/Machine Smooth Processing At High Speed, Which Ensures Process Efficiency And Saves Processing Time..
Multi-Function Cnc Controller: Multi-Coordinate Memory Function, Intelligent File Checking, Parameter Backup And Restore Function To Prevent The Loss Of Important Parameters, Intelligent Processing Memory, Supports Power Fail Safeguard And Breakpoint Memory..
Features
- Easily processes large-capacity G code or PLT file based on 512MB RAM, compatible with TYPE3, ARTCAM, CASTMATE, Pro/E, MasterCAM, Cimatron, UG Software, etc., so it works for most CNC routers on the market.
- Multi-function CNC Controller: multi-coordinate memory function, intelligent file checking, parameter backup and restore function to prevent the loss of important parameters, Intelligent processing memory, supports power fail safeguard and breakpoint memory.
- Customizable I/O interfaces provide a wide development platform, there are 8 input and output signals in every basic I / O signal node, the expansion I / O nodes can be expanded to 32 input and output signals, which is convenient for secondary development and meets the needs of different machine, project, and application.
- The system supports high subdivide controlling, to make the motor/machine smooth processing at high speed, which ensures process efficiency and saves processing time.
- DSP A11E ( English Version) is the upgraded DSP 0501 three-axis linkage motion controller, with more reliable functions, the upgraded A1X series controller contains A11, A12, and A18 controllers, if you do not know the difference between the controllers, please contact us first in case of purchasing by mistake.
- See more on Amazon...
Brand: PGFUN | Manufacturer: RICHAUTO
See On Amazon #17
PGFUN Harmonic Gear Drive Reducer with Nema 17 Stepper Motor 1.4A 2 Arcmin Ratio 30:1 Rotary Gear Reducer
Asin: B0BQ3S5V6J | Model: TR0050_173430 | PartNumber: TR0050_173430 | Ean: 0777723135790 | UPC: 777723135790
Stepper Motor Size: 1.3 X 1.7 X 1.7 Inch, Overall Size: 2.4 X 1.7 X 1.7 Inch.
Any Question, Free To Contact Us!.
Package Includes: Harmonic Drive Reducer (With Stepper Motor) X 1, 4-Wire Cable X 1.
Main Specs: Rated Current: 1.4 A, Voltage: Dc 24V, Ratio: 30:1, Backlash: 2 Arcmin, Step Angle: 0.06 Degree, Protection Level: Ip40, Advised Running Torque: 2.1 Nm, Weight: 0.9 Lbs.
Features
- The Harmonic Gear Drive Reducer with Nema 17 Stepper Motor for DIY Robot or Lightweight Loading Rotary Platform
- Main Specs: rated current: 1.4 A, voltage: DC 24V, ratio: 30:1, backlash: 2 arcmin, step angle: 0.06 degree, protection level: IP40, advised running torque: 2.1 NM, weight: 0.9 lbs
- Stepper Motor Size: 1.3 x 1.7 x 1.7 inch, Overall Size: 2.4 x 1.7 x 1.7 inch
- Package Includes: harmonic drive reducer (with stepper motor) x 1, 4-wire cable x 1
- Any question, free to contact us!
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 2.36 x 1.65 x 1.65 Inches
See On Amazon #18
PGFUN Harmonic Gear Drive Reducer Small Strain Wave Gearbox Gearbox 30:1 Rotary Reduction Actuator, Fits Nema 17 Stepper Motor (Flange Output)
Asin: B0CMZGCX3Z | Model: TR0061_11_30 | PartNumber: TR0061_11_30 | Ean: 0777723137053 | UPC: 777723137053
Strain Wave Harmonic Gearing Is Widely Used For Industrial Robots, Cnc Equipment, Medical Instruments, And The Automation Industry. The High Torque Strain Wave Gearbox Has 30/50 Gear Ratio And Provides A Harmonic Gear Reduction..
Please Refer To The Description Section Below To Know More Details And Specifications Of Pgfun Harmonic Reducer, Any Questions And Files Needed, Free To Contact Us..
The Strain Wave Drive Technology Makes The Reducer Come With More Great Features, Like Low Backlash, High Torque, High Reduction Ratio, Compact Size, Excellent Positional Accuracy And Repeatability Accuracy.
Harmonic Reducer Utilizes A Unique Operating Principle That Is Based On The Elastic Mechanics Of Metals, One Of The Biggest Advantages Is The Harmonic Drives Approach To Zero-Backlash And The Weight And Space Savings Compared To Other Reducers..
Features
- Directly Fits Nema 17 Stepper Motor: considering the wide application of the stepper motor, the harmonic gearbox comes with a customized flange to connect with Nema 17 stepper motors, and it s easy to assemble, making it easy to work for your application.
- Harmonic reducer utilizes a unique operating principle that is based on the elastic mechanics of metals, one of the biggest advantages is the harmonic drives approach to zero-backlash and the weight and space savings compared to other reducers.
- Strain wave harmonic gearing is widely used for industrial robots, CNC equipment, medical instruments, and the automation industry. the high torque strain wave gearbox has 30/50 gear ratio and provides a harmonic gear reduction.
- The strain wave drive technology makes the reducer come with more great features, like low backlash, high torque, high reduction ratio, compact size, excellent positional accuracy and repeatability accuracy
- Please refer to the description section below to know more details and specifications of PGFUN harmonic reducer, any questions and files needed, free to contact us.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #19
PGFUN 2 Pcs 1/8" PT x 10/30/50mm Coolant Pipe Adjustable 304 Stainless Steel Screw-in Coolant Nozzle High-Pressure Water Oil Cooling Tube for Lathe, Milling, CNC Machine (10mm)
Asin: B0B36MRHF3 | Model: TYXC0038-1/8PT-10I | PartNumber: TYXC0038-1/8PT-10I | Ean: 0774491728643 | UPC: 774491728643
Multi-Size Optional: Thread ( Pt/ Npt), Screw Joint Size (1/8, 1/4, 3/8, 1/2), Pipe Length (10/30/50 Mm) Are Choosable To Meet More Different Machine Needs, You Can Choose The Exact Size Nozzle For Your Machine..
Package Includes: Coolant Nozzle X 2 Pcs..
Specification: Thread-1/8" Pt, Pipe Length-10Mm, Id- 4Mm, Od- 6Mm, Vertical Movement- 34 Degree, Horizontal Rotating:- 360 Degree..
More Flexible: Horizontal 360 Degree Rotating Adjustable And Vertical ± 34 Degree Movement Adjustable, Fit Most For Lathe, Milling , Cnc Machine, Stone Curving Mechine And Jewelry Engraving Machines That Need Water Or Oil Cooling..
Features
- High-pressure Heavy Duty Coolant Nozzle: the nozzle made of 304 stainless steel, which can bear stronger water pressure and stand stablely for precision cooling.
- More Flexible: horizontal 360 degree rotating adjustable and vertical 34 degree movement adjustable, fit most for Lathe, Milling , CNC Machine, stone curving mechine and jewelry engraving machines that need water or oil cooling.
- Multi-size Optional: thread ( PT/ NPT), screw joint size (1/8, 1/4, 3/8, 1/2), pipe length (10/30/50 mm) are Choosable to meet more different machine needs, you can choose the exact size nozzle for your machine.
- Specification: thread-1/8 PT, pipe length-10mm, ID- 4mm, OD- 6mm, vertical movement- 34 degree, horizontal rotating:- 360 degree.
- Package Includes: coolant nozzle x 2 pcs.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #20
PGFUN 1:1 Right Angle Tapered Bevel Gearbox 1.5 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
Asin: B0C9ZVK4JL | Ean: 0777723136391 | UPC: 777723136391
Motor Drive Can Be Realized With Coupling And Belt Pulley Gear..
Note: It's Simple Steering Gear, Can Not Used For High Torque And High Accuracy Cnc Application..
Material: Aluminum Alloy & #45 Steel With Galvanization Process, Overall Size: 86.8 X 48 X 73 Mm/ 3.4 X 1.9 X 2.9 Inch..
Specification: Built-In 1.5 Module 20 Teeth Bevel Gears, 15 Mm/ 0.6" Shaft, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs , Max Rotation Speed: 1000 Rpm.
Features
- 1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.
- Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6 shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1000 rpm
- Motor drive can be realized with coupling and belt pulley gear.
- Material: Aluminum alloy & #45 Steel with galvanization process, Overall Size: 86.8 x 48 x 73 mm/ 3.4 x 1.9 x 2.9 inch.
- Note: it's simple steering gear, can not used for high torque and high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #21
PGFUN CNC 3D Touch Probe XYZ Axis Edge Finder 3-Coordinate Measuring Sensor Kit with 8 mm Shank & 2.0 mm Ruby Ball Tip (NPN-NO)
Asin: B0CSDW865L | Ean: 0717225952099 | UPC: 717225952099
Application: Theoretically It Can Work With Mach3, Mach4, Dynamotion, Linuxcnc, Uccnc, Centroid Cnc Or Any Other Cnc Control Software With A Probing Routine And A Breakout Board That Will Accept 3-Port Probe Input. (Contact Your Software, And Controller Manufacturer Or Lookup Forums For Probe Wiring And Connections).
Package Includes: 3D Touch Probe X 1, Cable X 2 M/ 6.5Ft, Allen Wrench X 1, Straight Probe Tip X 1, Wire Connector Kit X 1.
Upgraded Digitizing Cnc Touch Probe: The Probe Uses High-Quality Electronics For True High Measurement Precision And High Repeatability, The Fine Frosted Black Oxidized Aluminum Alloy With A Flat Surface Anti-Roll/Non-Round Shaped Design, Which Makes It Look Great And Protects The Touch Probe Well From Dropping..
Main Specs: Power: Dc5-24V, Npn-No Wiring ( High-Level Io Signal Output When Powered And Turns To Low-Level Signal Output When Triggered), Repeatability Accuracy: 0.01 Mm/ 0.0004 In, Feedrate: 50-200 Mm/Min, Over Travel Protection Distance: Xy- 12°, Z- 2Mm/ 0.08In, Xy Axis Trigger Force: 0.5-0.82N, Z Axis Trigger Force: 2.7N. (Note: Ensure The Sensitivity Of The Tool Setter Is Higher Than This Edge Finder/Trigger Force Less Than 2.7N If Working With A Tool Setter).
Features
- This 3-coordinate XYZ axis CNC probe is designed for wide DIY CNC applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing. ( Tips: it's developed for DIY application, not recommended for industrial use)
- Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: XY- 12 , Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
- Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
- Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it look great and protects the touch probe well from dropping.
- Package Includes: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, straight probe tip x 1, wire connector kit x 1
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #22
PGFUN 2 Pcs 2M 20 Teeth 8-18mm Shaft Hole Tapered Bevel Gear 1: 1#45 Steel 2 Module 90 Degree Steering Gear with M5 Fixing Hole(14mm)
Asin: B09VH288S5 | Model: TYXC-0011_2_20_14 | PartNumber: TYXC-0011_2_20_14 | Ean: 0771077590144 | UPC: 771077590144
The Bevel Gear Is Made Of 45# Steel Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For Long Lifetime..
Overall Size: Φ41.32 X 24 Mm.
Note: 1 Bevel Gear Only Match The Other Same Scale Gear, So 1 Set （2 Or More Gears) Should Be Replaced Together For Smoothly Drive..
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive And Other Industries That Needs Steering Drive..
Features
- Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 14mm shaft hole, M5 fixing hole with 5mm Keyway, 90 degrees steering angle.
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive.
- The bevel gear is made of 45# steel features high wear-resistance, strong and durable, which takes the quenching & blackening process for long lifetime.
- Note: 1 bevel gear only match the other same scale gear, so 1 set 2 or more gears) should be replaced together for smoothly drive.
- Overall Size: 41.32 x 24 mm
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Weight: 0.45 Pounds
See On Amazon #23
PGFUN 6-36V DC Motor Forward and Reverse Relay Module with Din 35-Rail Mounting Housing 12V 24V Linear Actuator Lift Controller with Limit Switch
Asin: B09V1MYWNZ | Model: TYXC-0006 | PartNumber: TYXC-0006 | Ean: 0771077589278 | UPC: 771077589278
Jog Control And Self-Locking Mode Adjustable: The Module Comes With Built-In Jumper Cap, Available To Adjust The Control Type According To Different Application Needs..
Warranty: 1 Year Quality Guarantee And Lifetime Customer Service, Any Questions, Free To Contact Us..
Easy To Wire: Clearly Wiring Diagram On The Shell Helps Easily Connect 3 Position Switch To Achieve Basic Motor Forward And Reverse Function, It Can Also Achieve Complicated Applications That May Need Professional Electrician, Like Adding The Limit Position, Cyclically Reciprocating Motion, Etc..
Widely Applications: The Relay Features Forward And Reverse Function, Can Be Used For Any Application That Requires The Ability To Reverse Motion, Like Linear Actuator, Linear Guide Rail, Electric Curtain, Rolling Doors, Etc..
Features
- Universal 6-36V Wide Voltage Module: suits most low-voltage DC motors, such as the most widely used 12V 24V DC motors.
- Widely Applications: the relay features forward and reverse function, can be used for any application that requires the ability to reverse motion, like linear actuator, linear guide rail, electric curtain, rolling doors, etc.
- Jog Control and Self-locking Mode Adjustable: the module comes with built-in jumper cap, available to adjust the control type according to different application needs.
- Easy to Wire: clearly wiring diagram on the shell helps easily connect 3 position switch to achieve basic motor forward and reverse function, it can also achieve complicated applications that may need professional electrician, like adding the limit position, cyclically reciprocating motion, etc.
- Warranty: 1 year quality guarantee and lifetime customer service, any questions, free to contact us.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 2.32 x 3.46 x 2.13 inches
See On Amazon #24
PGFUN 0-5V/ 0-10V/ 4-20MA/ RS485 High Accuracy Solar Radiation Sensor Transmitter IP67 Outdoor Meteorological Solar Irradiance Detector Sensor (4-20MA)
Asin: B09XTXRD9S | Ean: 0771077759954 | UPC: 771077759954
Aluminum Alloy Shell Featuring Rust-Resistant, Corrosion-Resistant And Waterproof, Comes With Built-In Spirit Level And Adjustment Knob.
If Any Question About The Product, Free To Contact Us..
To Know More Specs And Other Details About The Sensor, Please Refer To The Content In The Following Description Section And The Attached Manual..
High Transparency Quartz Glass, Light Transmittance Up To 95%.
Features
- High Accuracy Solar Radiation Sensor Transmitter, 0.3~3 m spectral range.
- High transparency quartz glass, light transmittance up to 95%
- Aluminum alloy shell featuring rust-resistant, corrosion-resistant and waterproof, comes with built-in spirit level and adjustment knob
- To know more specs and other details about the sensor, please refer to the content in the following description section and the attached manual.
- If any question about the product, free to contact us.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #25
PGFUN 2 Pcs 1/2" PT x 10/30/50mm Screw-in Bolt Type 304 Stainless Steel Coolant Nozzle Inclined-injection High Pressure Adjustable Water Oil Cooling Nozzle for Lathe, Milling, CNC Machine(30mm)
Asin: B0B37SC6RW | Model: TYXC0038-1/2PT-30I | PartNumber: TYXC0038-1/2PT-30I | Ean: 0774491728612 | UPC: 774491728612
Multi-Size Choosable: Thread ( Pt/ Npt), Screw Joint Size (1/8, 1/4, 3/8, 1/2), Pipe Length (10/30/50 Mm) Are Optical To Meet More Different Machine Needs, You Can Choose The Exact Size Nozzle For Your Machine...
Package Includes: Coolant Nozzle X 2 Pcs..
Specification: Thread-1/2" Pt, Pipe Length-30Mm, Id- 6Mm, Od- 8Mm, Vertical Movemen- 34 Degree, Horizontal Rotating:- 360 Degree..
More Flexible: Horizontal 360 Degree Rotating Adjustable And Vertical ± 34 Degree Movement Adjustable, Fit Most For Lathe, Milling , Cnc Machine, Stone Curving Mechine And Jewelry Engraving Machines That Need Water Or Oil Cooling..
Features
- High-pressure Heavy Duty Coolant Nozzle: the nozzle made of 304 stainless steel, which can bear stronger water pressure and stand stablely for precision cooling.
- More Flexible: horizontal 360 degree rotating adjustable and vertical 34 degree movement adjustable, fit most for Lathe, Milling , CNC Machine, stone curving mechine and jewelry engraving machines that need water or oil cooling.
- Multi-size Choosable: thread ( PT/ NPT), screw joint size (1/8, 1/4, 3/8, 1/2), pipe length (10/30/50 mm) are optical to meet more different machine needs, you can choose the exact size nozzle for your machine..
- Specification: thread-1/2 PT, pipe length-30mm, ID- 6mm, OD- 8mm, vertical movemen- 34 degree, horizontal rotating:- 360 degree.
- Package Includes: coolant nozzle x 2 pcs.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #26
PGFUN 1:1 Manual Right Angle Tapered Bevel Gearbox with Handle 1.5 Module 20 Teeth 90 Angle Drive Steering Gear Device Simple Mechanical DIY Module with 15mm Shaft
Asin: B0BNBVDF7P | Model: TYXC-0049 | PartNumber: TYXC-0049 | Ean: 0777723135707 | UPC: 777723135707
Come With Handle For Manually Right Angle Mechanical Transmission..
Note: It's Simple Steering Gearbox, Can Not Used For High Accuracy Cnc Application..
Material: Aluminum Alloy & #45 Steel, Overall Size: 86.8 X 48 X 53 Mm/ 3.4 X 1.9 X 2 Inch..
Specification: Built-In 1.5 Module 20 Teeth Bevel Gears, 15 Mm/ 0.6" Shaft, Max Axis Loading: 50 Kgs/ 112 Lbs, Max Torque Rating: 5 N.M/ 3.6 Ft.Lbs, Max Rotation Speed: 1000 Rpm.
Features
- 1:1 Manual Right Angle Bevel Gearbox with Handle for Simple DIY Mechanical Transmission Application.
- Specification: built-in 1.5 module 20 teeth bevel gears, 15 mm/ 0.6 shaft, Max Axis Loading: 50 kgs/ 112 lbs, max torque rating: 5 N.M/ 3.6 ft.lbs, max rotation speed: 1000 rpm
- Come with handle for manually right angle mechanical transmission.
- Material: Aluminum alloy & #45 Steel, Overall Size: 86.8 x 48 x 53 mm/ 3.4 x 1.9 x 2 inch.
- Note: it's simple steering gearbox, can not used for high accuracy CNC application.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 2.09 x 3.39 x 1.89 inches | Weight: 0.30 Kilograms
See On Amazon #27
Harmonic Gear Drive Reducer Small Strain Wave Gearbox Gearbox 30:1 Rotary Reduction Actuator, Fits Nema 14 Stepper Motor (Flange Output)
Asin: B0CZ4BWQY4 | Ean: 0777723137442 | UPC: 777723137442
Strain Wave Harmonic Gearing Is Widely Used For Industrial Robots, Cnc Equipment, Medical Instruments, And The Automation Industry. The High Torque Strain Wave Gearbox Has 30/50 Gear Ratio And Provides A Harmonic Gear Reduction..
Please Refer To The Description Section Below To Know More Details And Specifications Of Pgfun Harmonic Reducer, Any Questions And Files Needed, Free To Contact Us..
The Strain Wave Drive Technology Makes The Reducer Come With More Great Features, Like Low Backlash, High Torque, High Reduction Ratio, Compact Size, Excellent Positional Accuracy And Repeatability Accuracy.
Harmonic Reducer Utilizes A Unique Operating Principle That Is Based On The Elastic Mechanics Of Metals, One Of The Biggest Advantages Is The Harmonic Drives Approach To Zero-Backlash And The Weight And Space Savings Compared To Other Reducers..
Features
- Directly Fits Nema 14 Stepper Motor: considering the wide application of the stepper motor, the harmonic gearbox comes with a customized flange to connect with Nema 14 stepper motors, and it s easy to assemble, making it easy to work for your application.
- Harmonic reducer utilizes a unique operating principle that is based on the elastic mechanics of metals, one of the biggest advantages is the harmonic drives approach to zero-backlash and the weight and space savings compared to other reducers.
- Strain wave harmonic gearing is widely used for industrial robots, CNC equipment, medical instruments, and the automation industry. the high torque strain wave gearbox has 30/50 gear ratio and provides a harmonic gear reduction.
- The strain wave drive technology makes the reducer come with more great features, like low backlash, high torque, high reduction ratio, compact size, excellent positional accuracy and repeatability accuracy
- Please refer to the description section below to know more details and specifications of PGFUN harmonic reducer, any questions and files needed, free to contact us.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #28
PGPGFUN 2 Pcs 2M 20 Teeth 18mm Bore Tapered Bevel Gears 1: 1 2 Module #45 Steel 90 Degree Steering Gear with Set Screws
Asin: B0CWL3VVCW | Ean: 0717225952211 | UPC: 717225952211
Widely Applied In Agricultural Equipment, Textile Machinery, Printing Machinery, Mechanical Transmission, Automotive, Education And Science, And Other Industries That Need Steering Drives..
Overall Size: Φ41.32 X 24 Mm/ 1.63 X 0.95 In.
Note: 1 Bevel Gear Only Matches The Other Same Scale Gear, So 1 Set （2 Or More Gears) Should Be Replaced Together For Smoothly Drive..
The Bevel Gear Is Made Of #45 Steel Features High Wear-Resistance, Strong And Durable, Which Takes The Quenching & Blackening Process For A Long Service Lifetime..
Features
- Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm bore, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 18mm bore, M5 fixing hole with 6mm Keyway, 90 degrees steering angle.
- The bevel gear is made of #45 steel features high wear-resistance, strong and durable, which takes the quenching & blackening process for a long service lifetime.
- Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive, education and science, and other industries that need steering drives.
- Note: 1 bevel gear only matches the other same scale gear, so 1 set 2 or more gears) should be replaced together for smoothly drive.
- Overall Size: 41.32 x 24 mm/ 1.63 x 0.95 in
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #29
PGFUN 2 Pcs 3/8" PT x 10/30/50mm Screw-in Bolt Type 304 Stainless Steel Coolant Nozzle Inclined-Injection High Pressure Adjustable Water Oil Cooling Nozzle for Lathe, Milling, CNC Machine(30mm)
Asin: B0B37SC24F | Ean: 0774491728575 | UPC: 774491728575
Multi-Size Choosable: Thread ( Pt/ Npt), Screw Joint Size (1/8, 1/4, 3/8, 1/2), Pipe Length (10/30/50 Mm) Are Optical To Meet More Different Machine Needs, You Can Choose The Exact Size Nozzle For Your Machine..
Package Includes: Coolant Nozzle X 2 Pcs..
Specification: Thread-3/8" Pt, Pipe Length-30Mm, Id- 4Mm, Od- 6Mm, Vertical Movement- 34 Degree, Horizontal Rotating:- 360 Degree..
More Flexible: Horizontal 360 Degree Rotating Adjustable And Vertical ± 34 Degree Movement Adjustable, Fit Most For Lathe, Milling , Cnc Machine, Stone Curving Mechine And Jewelry Engraving Machines That Need Water Or Oil Cooling..
Features
- High-pressure Heavy Duty Coolant Nozzle: the nozzle made of 304 stainless steel, which can bear stronger water pressure and stand stablely for precision cooling.
- More Flexible: horizontal 360 degree rotating adjustable and vertical 34 degree movement adjustable, fit most for Lathe, Milling , CNC Machine, stone curving mechine and jewelry engraving machines that need water or oil cooling.
- Multi-size Choosable: thread ( PT/ NPT), screw joint size (1/8, 1/4, 3/8, 1/2), pipe length (10/30/50 mm) are optical to meet more different machine needs, you can choose the exact size nozzle for your machine.
- Specification: thread-3/8 PT, pipe length-30mm, ID- 4mm, OD- 6mm, vertical movement- 34 degree, horizontal rotating:- 360 degree.
- Package Includes: coolant nozzle x 2 pcs.
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
See On Amazon #30
PGFUN DC Brush Motor Speed Controller JYMC-110C-ll 115VAC 12ADC Household Lathe Regulator Control Board for Mini Lathe
Asin: B09ZYDQ31Z | Model: TYXC-0032-JYMC-110C-ll | PartNumber: TYXC-0032-JYMC-110C-ll | Ean: 0774491728155 | UPC: 774491728155
Specification: Input: 115 Vac-50/60 Hz, Output: 0-180 Vdc, Rated: 12 Adc.
Package Includes: Dc Brush Motor Speed Controller X 1.
Model Number: Jymc-110C-Ii ( Same As Old Version Jymc-220C-Ii).
Fit The Machine: Cj0618 And Other Mini Lathes.
Features
- DC Brush Motor Speed Regulator for Household Mini Lathe
- Fit the Machine: CJ0618 and other mini lathes
- Specification: Input: 115 VAC-50/60 HZ, Output: 0-180 VDC, Rated: 12 ADC
- Model Number: JYMC-110C-II ( same as old version JYMC-220C-II)
- Package Includes: DC brush motor speed controller x 1
- See more on Amazon...
Brand: PGFUN | Manufacturer: PGFUN
Dimensions: 1.30 x 4.30 x 3.60 inches
See On Amazon