POJECITY - Buying Guide
Last Updated: 05/07/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Kingroon PLA 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), 1.75 mm,White
Asin: B09WYGKS3B | Model: Ttljp20220340 | PartNumber: Ttljp20220340 | Ean: 0746197191458 | UPC: 746197191458
Dimensional Accuracy & Consistency: These Tough Pla Filaments Have Very Strict Tolerances. Diameter Is 1.75Mm With A Dimensional Accuracy Of + / - 0.02Mm 1 Kg Spool (2.2Lbs)..
Excellent Service: Kingroon Is A Customer-Centric Company, We Have Been Committed To Providing Customers With Good Service, If You Have Any Questions, Please Do Not Hesitate To Contact Us At Any Time, We Will Try Our Best To Solve Your Problems..
Wide Compatibility: Works Perfectly With All Common 1.75Mm Fdm 3D Printers, Thanks To The High Quality Standards In Terms Of Manufacturing Accuracy..
Clog-Free, Bubble-Free & Easy-To-Use: Complete Drying For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re Bag. Recommended Pla Filament Extrusion/Nozzle Temperature 215-220℃, Bed 70℃..
Features
- Toughness Enhanced PLA Filaments: Kingroon premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
- Clog-Free, Bubble-Free & Easy-to-use: Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220 , bed 70 .
- Dimensional Accuracy & Consistency: These tough PLA filaments have very strict tolerances. Diameter is 1.75mm with a dimensional accuracy of + / - 0.02mm 1 kg spool (2.2lbs).
- Wide Compatibility: Works perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy.
- Excellent service: Kingroon is a customer-centric company, we have been committed to providing customers with good service, if you have any questions, please do not hesitate to contact us at any time, we will try our best to solve your problems.
- See more on Amazon...
Brand: POJECITY | Manufacturer: tongtuoljp1101
Weight: 2.20 Pounds
See On Amazon #2
25PCS 3D Printer Extruder Nozzles Hardened Steel, Stainless Steel, Brass High Temperature Pointed Wear Resistant Nozzle 0.2 0.3 0.4 0.5 0.6 0.8 1.0 mm, for CR-10, Ender 3/ Ender3 pro, Prusa i3 (5)
Asin: B09HC73Q2S | Model: M5 | PartNumber: M5 | Ean: 0787898523131 | UPC: 787898523131
Applicability And Compatibility--Mk8 Extruder Nozzles Fit For 3D Printer Makerbot Creality Cr-10,Anycubic, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Parameter: Input Diameter 1.75Mm; Output Diameter 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.8Mm, 1.0Mm; Screw Thread: M6;Hexagon Diameter: 6 Mm..
Precise Design--3D Printer Nozzles Can Prevent Print Head From Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish.Reduce The Resistance From The Corners And Avoid Blocking Of The Filament With Rounded Chamfer.Easy To Identify With Engraving The Size On Each Nozzle..
Package Include--Printer Nozzles Come With 25Pieces Mk8 Nozzles In 7 Sizes(Quantity X Output Diameter): 3X 0.2Mm, 3X 0.3Mm, 7 X 0.4Mm, 3 X 0.5Mm, 3X 0.6Mm, 3X 0.8Mm, 3X 1.0Mm,With 10Pcs Cleaning Needles..
Features
- Premium Quality: MK8 nozzles are made of high quality Hardened Steel, Stainless steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
- Package Include--Printer nozzles come with 25pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 7 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles.
- Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10,Anycubic, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
- Parameter: Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm.
- See more on Amazon...
Brand: POJECITY | Manufacturer: M2
See On Amazon #3
POJECITY 3D Printing Magnetic Plate Dual Sided Flex Steel Bed 235x235mm with PEI+Magnetic Surface Printing Hotbed Parts for Ender 3 Aquila Kobra Neptune 2 Ender 3 S1 Ender 3 V2
Asin: B09P11F12Y | Model: Y3 | PartNumber: Y3 | Ean: 0798107594811 | UPC: 798107594811
When Printing Is Complete, Let The Spring Steel Sheet Cool Down Enough (To Around 40C), Then Easily Remove The Prints. If The Print Is Still Stuck, Just Gently Bend The Steel Plate And Pop It Off! After Many Times Printings, Lightly Scour The Surface Of The Pei With Some Mild Steel Wool With 400 Grit Will Have Great Adhesion Or Use Alcohol To Clear It And Let It Dry..
Easy To Install: Made Of High Quality Stainless Steel And Strong Magnetic Base, Stick The Magnetic Base To Your Printing Build Plate By Peeling Off The Backing Paper And Sticking It To Your Bed, Then Place The Steel Plate Onto The Magnetic Sheet. Keep The Side With Pei Facing Up To Print On. Please Peel Off The Protective Film On The Surface Before Printing..
The Size Of Flexible Pei Build Plate 235*235Mm(9.25*9.25Inch),Pei Sheet Is Applicable With Creality 3D Printer Such As Ender-3 Pro, Ender-3 V2,Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro,Cr-20, Cr-20 Pro And Similarly Sized Machines..
Double-Sided Pei: Flexible Printing Bed Has Double-Sided Pei Coating, Both Sides Can Be Use,Both Side Is Textured..
Features
- if you get a wrong size,Please replace it and refund.Size: 235mm or 180mm,because has a accident.
- Double-sided PEI: Flexible Printing bed has double-sided PEI coating, both sides can be use,both side is textured.
- When printing is complete, let the spring steel sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- The size of flexible PEI build plate 235*235mm 9.25*9.25inch ,PEI sheet is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2 Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro CR-20, CR-20 Pro and similarly sized machines.
- Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your printing build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
- See more on Amazon...
Brand: POJECITY | Manufacturer: O1
See On Amazon #4
E3D V6 Volcano Compatible Multi-Mount All Metal Mount Fixed Blocks for E3D Hotend for CR10S Ender-3 Ender-3 PRO Ender 5
Asin: B09MLHNFHQ | Model: sy | PartNumber: sy | Ean: 0798107660219 | UPC: 798107660219
Has Four (4) 3Mm Threaded Accessory Attachment Holes..
If Any Question, Please Feel Free To Contact Us, We Will Try Our Best To Service You..
We Include All The Hardware For The Mount And Extra Hardware To Attach The Most Popular Accessories (Available Below)..
Fits E3d V6 And V6 Volcano With No Z Stop Height Adjustment..
Features
- All Metal Anodized 6061-T6 aluminum.
- Fits E3D V6 and V6 Volcano with no Z stop height adjustment.
- Has Four (4) 3mm threaded accessory attachment holes.
- We include all the hardware for the mount and extra hardware to attach the most popular accessories (available below).
- If any question, please feel free to contact us, we will try our best to service you.
- See more on Amazon...
Brand: POJECITY | Manufacturer: Ln
See On Amazon #5
All Metal Heatbreak for KP3S Titan Extruder Hotend Throat M6 Thread 6 * 30mm for 1.75mm Filament 3D Printer Parts
Asin: B0B1Q7C256 | Model: yyds083 | PartNumber: yyds083 | Ean: 0746197195593 | UPC: 746197195593
Material: All Metal.
Team Service: Professional Kingroon Service Team Guarantee All User Can Get Helpful Service, And Kingroon Fb Group Always Support Solution To Resolve The Problem..
Kp3s Heatbreak Can Print High Temperature Materials Such As Nylon And Abs..
Size: 6*30Mm Throat.
Features
- Inner diameter: 2.00mm for 1.75mm filament
- Size: 6*30mm throat
- Material: All metal
- KP3S heatbreak can print High temperature materials such as nylon and ABS.
- Team service: professional Kingroon service team guarantee all user can get helpful service, and Kingroon FB group always support solution to resolve the problem.
- See more on Amazon...
Brand: POJECITY | Manufacturer: tongtuo083
See On Amazon #6
Automatic Bed Leveling Sensor 3D Touch Auto Leveling for 3D Printers CR-10/Ender 3/ Pro/CR-10S/S4/S5 KP3S KP5
Asin: B09M9V8Y4Y | Model: N2 | PartNumber: N2 | Ean: 0768499602845 | UPC: 768499602845
The 3D Touch Auto Is A Device That Uses The Hall Defect To Achieve Leveling .The Position Of The Point Can Be Obtained By Touching The Point On The Heated Bed ,And Then Compensated By Adjusting The Z-Axis Height During Printing ,Printing Can Also Be Achieved Even Though The Platform Is Not Flat ..
Note2: Pulling/Pushing Hardly On The Push-Pin May Damage Touch Sensor And Make It Less Accurate..
The Main Functions Of Abl And Controls Of Auto Bed Leveling Are The Same As Most Auto Bed Leveling Sensors, Which Consists Of A Rc Servo And A Micro Switch,Thus,3D Touch Can Be Used On Almost Every 3D Printer Control Board..
Automatic Bed Leveling Sensor Is Features Simple, Smart And Precise. It Could Work With Nearly Any Kind Of Bed Materials, Such As Glasses, Woods, Metals And So On. The Position Of The Point Can Be Obtained By Touching The Point On The Heated Bed, And Then Compensated By Adjusting The Z-Axis Height During Printing..
Features
- Automatic Bed Leveling Sensor is Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
- Automatic Bed Leveling Sensor is Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
- The 3D Touch auto is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
- The main functions of ABL and controls of Auto bed Leveling are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D touch can be used on almost every 3D printer control board.
- NOTE2: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate.
- See more on Amazon...
Brand: POJECITY | Manufacturer: M3
See On Amazon #7
Kingroon Filament Dryer Box with PLA+ Black Filament, 3D Printer Filament Dry Box Keeping Filament Dry During 3D Printing 4L Compatible with 0.5/1KG PLA Filament and PETG TPU ABS Material
Asin: B0CFX7NSH4 | Model: filament dryer box 02 | PartNumber: filament dryer box 02 | Ean: 0749684725761 | UPC: 749684725761
High Compatibility And Saving Screening Time: The Dryer Box Has High Compatibility, Can Store 0.5/1Kg Filaments, And Supports Direct Extruder And Bowden Extruder. The Upper Port Of The Dryer Box Is The Connection To Bowden Extruder And The Right Port Of The Dryer Box Is The Connection To Direct Extruder..
Ingenious Structural Design And Easy To Use: The Dryer Box's Transparent Structural Design Makes It Easy To Observe The Remaining Conditions Of The Materials, And The Reinforced Ptfe Makes The Discharge Smoother. It Has A Certain Degree Of Corrosion Resistance And High-Temperature Resistance, Which Is Safe To Use..
Real-Time Monitoring Of Internal Temperature And Humidity: Displays The Humidity And Temperature In The Dryer Box In Real-Time. Setting Temperature 40°, 45°, 50°C, Setting Time From 6 Hours To 12 Hours. If The Dryer Box Is Used In A Room With Room Temperature Below 16°C, The Temperature Inside The Dryer Box Will Not Reach 50°C. Don't Worry As This Will Not Reduce The Drying Effect..
Double Sealing Ring Keeps The Filament Dry And Enhances The Printing Effect: Six Bayonets Double Sealing Ring Design, Can Store The Filament For A Long Time Without Power Supply, And Protect Your Filament From Moisture And Dirt, You Can Put Desiccants Inside The Dryer Box To Improve Drying Efficiency & Quality..
Features
- Remove Excess Water:kingroon PLA+ (black) is used with a filament drying box, which can effectively solve the problems of drawing, clogging, layer migration and other problems caused by filament printing in a humid state. The drying box is an important component of 3D printing and has the function of removing moisture.
- Double Sealing Ring Keeps the Filament Dry and Enhances the Printing Effect: Six bayonets double sealing ring design, can store the filament for a long time without power supply, and protect your filament from moisture and dirt, You can put desiccants inside the dryer box to improve drying efficiency & quality.
- High Compatibility and Saving Screening Time: The dryer box has high compatibility, can store 0.5/1KG filaments, and supports Direct Extruder and Bowden Extruder. The upper port of the dryer box is the connection to Bowden Extruder and The right port of the dryer box is the connection to Direct Extruder.
- Real-time monitoring of internal Temperature and Humidity: Displays the humidity and temperature in the dryer box in real-time. Setting temperature 40 , 45 , 50 C, setting time from 6 hours to 12 hours. If the dryer box is used in a room with room temperature below 16 C, the temperature inside the dryer box will not reach 50 C. Don't worry as this will not reduce the drying effect.
- Ingenious Structural Design and Easy to Use: The dryer box's transparent structural design makes it easy to observe the remaining conditions of the materials, and the reinforced PTFE makes the discharge smoother. It has a certain degree of corrosion resistance and high-temperature resistance, which is safe to use.
- See more on Amazon...
Brand: POJECITY | Manufacturer: kingroon pla+
Weight: 2.20 pounds
Warranty: 1 year manufacturer
See On Amazon #8
Nema17 Stepper Motor Bipolar 42 Motor 4-Lead Wire with 1m Cable for CNC XYZ 3D Printer (33mm, 2Packs)
Asin: B09SV2W66H | Model: ljpyyds34 | PartNumber: ljpyyds34 | Ean: 0746197841926 | UPC: 746197841926
The Structure Is Stable, Not Jam: The Surface Of The Motor Rotor Of Our Shop Is Coated With Premium Resin To Seal The Rotor As A Whole, Cured At High Temperature. After The Outer Circle Of The Rotor Is Abraded And Processed, There Are No Processing Residues Such As Iron Pins In The Tooth Cavity. The Motor Is Stable After Long-Term Use, And There Is No Risk Of Jamming.
Team Service: Professional Kingroon Service Team Guarantee All User Can Get Helpful Service.If Need Further Please Feel Free Contact Us, We Very Happy To Assist You.
Current And Power: When Choosing A Stepper Motor, You Need To Pay Attention To The Rated Voltage And Current Parameters. As Long As The Stepper Motor Drive Unit Can Control The Current Output, In Theory, Any Power Supply Voltage Higher Than The Motor Rated Voltage Can Be Used. If The Drive Unit And The Current Cannot Be Controlled, You Need To Use A Power Supply Voltage Close To The Rated Voltage, Otherwise The Motor Will Have A Risk Of Overheating.
Stable Speed And Low Noise: This Motor Has Been Tested On A Variety Of Machines. The Overall Stability Of The Motor Is High, The Speed Is Uniform, And The Noise Is Low.
Features
- Uniform rotation speed, no step loss: we build strengthens PCB board in the motor, and adopts a unique stator technology to ensure that the stator teeth of the motor are uniformly and smoothly ground, the inner hole is high in precision, and the rotation speed is stable and accurate during work
- Stable speed and low noise: This motor has been tested on a variety of machines. The overall stability of the motor is high, the speed is uniform, and the noise is low
- The structure is stable, not jam: the surface of the motor rotor of our shop is coated with premium resin to seal the rotor as a whole, cured at high temperature. After the outer circle of the rotor is abraded and processed, there are no processing residues such as iron pins in the tooth cavity. The motor is stable after long-term use, and there is no risk of jamming
- Current and power: When choosing a stepper motor, you need to pay attention to the rated voltage and current parameters. As long as the stepper motor drive unit can control the current output, in theory, any power supply voltage higher than the motor rated voltage can be used. If the drive unit and the current cannot be controlled, you need to use a power supply voltage close to the rated voltage, otherwise the motor will have a risk of overheating
- Team service: professional Kingroon service team guarantee all user can get helpful service.If need further please feel free contact us, we very happy to assist you
- See more on Amazon...
Brand: POJECITY | Manufacturer: tongtuoljp030
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #9
E3D V5-Mega-zero2.0 3D Printer Extruder Print Head Hotend for ANYCUBIC Mega
Asin: B0B1Q1CDBL | Model: yyds081 | PartNumber: yyds081 | Ean: 0746197195579 | UPC: 746197195579
Throat: Ptfe, All Metal.
Nozzle Size: 0.4Mm.
Material: Metal + Plastic.
Heater: 24V.
Features
- Application: Suitable for 1.75mm filament
- Heater: 24V
- Throat: PTFE, all metal
- Material: metal + plastic
- Nozzle size: 0.4mm
- See more on Amazon...
Brand: POJECITY | Manufacturer: tongtuo081
See On Amazon #10
MKS Gen L V1.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard
Asin: B09S6D19XZ | Model: Y15 | PartNumber: Y15 | Ean: 0746197528339 | UPC: 746197528339
Support A Variety Of Stepper Drivers: A4988,Drv8825,Tmc2208 And Tmc2100, And Available To Work With Lcd2004,Lcd12864,Mks Tft24/28/32/35 & Available To Connect External Large Stepp Drivers, A4988 Driver Board Widely Used In 3D Printers And Small Cnc Machines..
Support Functions: Non-Trace Resumption After Power Off, Run Out Filament ,And Auto Shut Down, Xtz Axis With Different Color Terminal Controls The Motors And End Stop,Which Is Convenient To Wire.Use High-Quality 4 Layer Pcb&Use Special Power Chip.Retail Servos,Aux-1 And Aux-2 Interface Of Ramps1.4 Provide Three 5V Output And Three 12V Output Interfaces..
Five Different Step Resolutions: Full-Step, Half-Step, Quarter-Step, Eighth-Step, And Sixteenth-Step.Adjustable Current Control Lets You Set The Maximum Current Output With A Potentiometer, Which Lets You Use Voltages Above Your Stepper Motor's Rated Voltage Toachieve Higher Step Rates.Use The Configuration File To Set The Driving Current Mode, Avoid Manual Adjustment Of The Current To Cause The Burned Drive, Convenient, Safe And Reliable..
Integrate 2560 And Ramps1.4 One Pcb,Which Designed To Avoid Complicated Connections, Easier Wiring And More Stable Use High-Quality 4 Layer Pcb&Use Special Power Chip,Support 12V-24V, Also Use Run Marlin Firmware,Same As Configuration Way As Ramps1.4, It Can Replace Ramps1.4 Directly..
Features
- Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
- Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
- Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.
- Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
- See more on Amazon...
Brand: POJECITY | Manufacturer: tongtuo016
See On Amazon #11
3D Printer Heating Bed Insulation Cotton for 3D Printer Heatbed 235mm Foil Self-Adhesive Insulation Cotton Sticker
Asin: B09QKRCDPG | Model: Y2 | PartNumber: Y2 | Ean: 0746197528162 | UPC: 746197528162
Advantage:Soft, Cold-Resistant, Heat-Resistant, Waterproof, Low Thermal Conductivity, Shock Absorption, Sound Absorption, Etc..
Fix With Ender3,Ender 3 Pro,Ender 3V2,Ender 5.
3D Printer Heating Bed Heat Insulation And Noise Blocking Accessories,Apply To 3D Printer Heated Bed, Aluminum Substrate, Pcb Hot Bed, Silicone Hot Bed Bottom.
Suitable Temperature: - 50℃ To 150℃ (-58℉~302℉).
Features
- High quality tri-layer, twin density lightweight foam laminate
- Suitable temperature: - 50 to 150 (-58 ~302 )
- Advantage:soft, cold-resistant, heat-resistant, waterproof, low thermal conductivity, shock absorption, sound absorption, etc.
- 3D printer heating bed heat insulation and noise blocking accessories apply to 3D printer heated bed, aluminum substrate, PCB hot bed, silicone hot bed bottom
- Fix with Ender3,Ender 3 pro,Ender 3v2,Ender 5
- See more on Amazon...
Brand: POJECITY | Manufacturer: K5
See On Amazon #12
Kingroon High Speed PETG 3D Printer Filament 1.75mm, 3D Printer Rapid Filament for 300-350 mm/s Hyper Printing Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Plastic Spool(2.2lbs) (Yellow)
Asin: B0CYC85PXT
【Enhanced Strength & Toughness】Kingroon Rapid Petg Filament Features High Flexural Modulus And Elongation At Break, Which Makes It Resistant To Brittleness And Cracking, Bringing Excellent Results For Printing Functional Parts.
【Pla Recommend Settings】To Achieve The Best Printing Results With Petg Filament, We Recommend Printing At A Nozzle Temperature Of 220°C, A Bed Temperature Of 60°C, And A Printing Speed Of 50-100Mm/S..
【Wide Compatibility】Kingroon Transparent Petg Works Perfectly With All Common 1.75Mm Fdm 3D Printers, Thanks To The High Quality Standards In Terms Of Manufacturing Accuracy..
【Dimensional Accuracy & Consistency】These 3D Printer Pla Filaments Have Very Strict Tolerances. Diameter Is 1.75Mm With A Dimensional Accuracy Of + / - 0.02Mm 1 Kg Spool (2.2Lbs)..
Features
- 300-350mm/s Printing Speed With enhanced fluidity, Kingroon RAPID PETG filament melts rapidly and flows smoothly, allowing for up to 350mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Dimensional Accuracy & Consistency These 3D Printer PLA filaments have very strict tolerances. Diameter is 1.75mm with a dimensional accuracy of + / - 0.02mm 1 kg spool (2.2lbs).
- Enhanced Strength & Toughness Kingroon RAPID PETG filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts
- Wide Compatibility Kingroon Transparent PETG Works perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy.
- PLA Recommend Settings To achieve the best printing results with PETG filament, we recommend printing at a nozzle temperature of 220 C, a bed temperature of 60 C, and a printing speed of 50-100mm/s.
- See more on Amazon...
Brand: POJECITY | Manufacturer: Kingroon
Weight: 2.90 pounds
See On Amazon