PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS - Buying Guide
Last Updated: 04/30/2024
Share on
Bestselling from PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS on Amazon
- Edge Industrial 3/8" Hose ID x 1/8" Male NPT MNPT 90 Degree Brass Elbow Fitting Fuel/Air/Water/Oil/G...
- PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS EDGE INDUSTRIAL 3/4inches Hose ID to 1/2inches Male NPT ...
- Preset in-Line Pressure Regulator for Pneumatic Tools, 1/4" NPT, Connects Directly to Air Tool (94 PSI)
- Liquid Filled Center Back Mount Pressure Gauge with 1.5" Dial, 0-5000 PSI, 1/8" Male NPT Connection,...
- Replacement Filter For Sullair 2250125-371, 2250102-158
- Brass, 1/4" NPT Industrial Hard Seat Safety Pressure Relief Valve, Made In The USA (270 PSI / 224 SCFM)
- Single Groove 8.25" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width...
- Brass, 1/4" NPT Industrial Soft Seat Safety Pressure Relief Valve, Made In The USA (110 PSI / 100 SCFM)
- Double Groove 11.75" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Widt...
- Brass, 1/4" NPT Economy Soft Seat Safety Pressure Relief Valve, Made In The USA (180 PSI / 87 SCFM)
#1
Edge Industrial 3/8" Hose ID x 1/8" Male NPT MNPT 90 Degree Brass Elbow Fitting Fuel/Air/Water/Oil/Gas/WOG (QTY 01)
Asin: B07CRRT1BR | Model: E.I. BARB 46 | PartNumber: E.I. BARB 46 | Ean: 0713807492755 | UPC: 713807492755
Please Note, 3/8 Npt Measures 0.675" Outside Thread Diameter In Linear Inches.
Not Deemed Lead Free. Not For Potable Water.
Backed By Edge Industrial Full Manufacturers Warranty.
150 Psi Maximum Working Pressure, -40° To 160° Temperature Rating.
Features
- 3/8" Hose ID x 1/8" Male NPT Brass 90 Degree Elbow Barb Fitting
- 150 PSI maximum working pressure, -40 to 160 Temperature Rating
- PLEASE NOTE, 3/8 NPT MEASURES 0.675 OUTSIDE THREAD DIAMETER IN LINEAR INCHES
- Backed by EDGE Industrial full manufacturers warranty
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: EDGE INDUSTRIAL
Weight: 0.01 Pounds
See On Amazon #2
PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS EDGE INDUSTRIAL 3/4inches Hose ID to 1/2inches Male NPT MNPT 90 Degree Elbow Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 01)
Asin: B07CRQVRYX | Model: E.I. BARB 313 | PartNumber: E.I. BARB 313 | Ean: 0713807492854 | UPC: 713807492854
Please Note, 1/2" Npt Measures 0.840" Outside Thread Diameter In Linear Inches.
Not Deemed Lead Free. Not For Potable Water.
Backed By Edge Industrial Full Manufacturers Warranty.
150 Psi Maximum Working Pressure, -40° To 160° Temperature Rating.
Features
- 3/4" Hose ID x 1/2" Male NPT Brass 90 Degree Elbow Barb Fitting
- 150 PSI maximum working pressure, -40 to 160 Temperature Rating
- PLEASE NOTE, 1/2 NPT MEASURES 0.840 OUTSIDE THREAD DIAMETER IN LINEAR INCHES
- Backed by EDGE Industrial full manufacturers warranty
- NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: EDGE INDUSTRIAL
Weight: 0.01 Pounds
See On Amazon #3
Preset in-Line Pressure Regulator for Pneumatic Tools, 1/4" NPT, Connects Directly to Air Tool (94 PSI)
Asin: B0BTMV8133 | Model: R072-90 | PartNumber: R072-90
94 Psi Preset Pressure Setting, Light Weight Aluminum Body.
230 Max Input Pressure, 2 1/2" Overall Length.
1/4" Female Npt Inlet X 1/4" Male Npt Outlet To Air Tool.
Features
- PRESET IN-LINE PRESSURE REGULATOR FOR PNEUMATIC AIR TOOLS, CONNECTS DIRECTLY TO YOUR TOOL
- 1/4 FEMALE NPT INLET X 1/4 MALE NPT OUTLET TO AIR TOOL
- 94 PSI PRESET PRESSURE SETTING, LIGHT WEIGHT ALUMINUM BODY
- 230 MAX INPUT PRESSURE, 2 1/2 OVERALL LENGTH
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
Dimensions: 0.85 x 2.50 x 0.85 inches
See On Amazon #4
Liquid Filled Center Back Mount Pressure Gauge with 1.5" Dial, 0-5000 PSI, 1/8" Male NPT Connection, Stainless Steel CASE and Bezel (1)
Asin: B0BYQP1T52
Please Note: 1/8" Male Npt Measures 0.405" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data, Psi/Bar.
Glycerin Filled, Polycarbonate Lens, Stainless Steel Case & Bezel, Copper Alloy Internals, Black Aluminum Pointer, Design Meets Or Exceeds Asme B40.100 Pressure Gauge Standard.
Center Back Mount Glycerin Filled Pressure Gauge, Face/Dial Size 1-1/2", 1/8" Male Npt Connection, 0-5000 Psi Range.
Features
- LIQUID/GLYCERIN FILLED GAUGES ARE SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE VIBRATION AND PULSATION IS PRESENT
- CENTER BACK MOUNT GLYCERIN FILLED PRESSURE GAUGE, FACE/DIAL SIZE 1-1/2, 1/8 MALE NPT CONNECTION, 0-5000 PSI RANGE
- PLEASE NOTE: 1/8 MALE NPT MEASURES 0.405 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- GLYCERIN FILLED, POLYCARBONATE LENS, STAINLESS STEEL CASE & BEZEL, COPPER ALLOY INTERNALS, BLACK ALUMINUM POINTER, DESIGN MEETS OR EXCEEDS ASME B40.100 PRESSURE GAUGE STANDARD
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA, PSI/BAR
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #5
Replacement Filter For Sullair 2250125-371, 2250102-158
Asin: B0BRD5SRHP | Model: Replacement for 2250125-371, 2250102-158 | PartNumber: Replacement for 2250125-371, 2250102-158
Low Pressure Drop For Improved Equipment Performance.
Steel Reinforced Frame..
Pleated Construction.
Rated For 99+% Removal Efficiency At 2 Micron.
Features
- 5 13/16" Outside Diameter, x 3 1/2" Inside Diameter, x 12 31/32" Height
- Rated for 99+% removal efficiency at 2 micron
- Low pressure drop for improved equipment performance
- Pleated Construction
- Steel reinforced frame.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
Dimensions: 12.96 x 5.81 x 5.81 Inches
See On Amazon #6
Brass, 1/4" NPT Industrial Hard Seat Safety Pressure Relief Valve, Made In The USA (270 PSI / 224 SCFM)
Asin: B0B3JSMW98 | Model: SRH250-14 | PartNumber: SRH250-14
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/4" Npt Measures 0.540" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 270 PSI And Has a Flow Rate (SCFM) Of 224
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/4 NPT Measures 0.540 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 2.00 x 0.69 x 0.69 inches
See On Amazon #7
Single Groove 8.25" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 1 Groove Pulley (1-1/8" Shaft / 1.125" Bore, BK85H)
Asin: B0BWBNT8NK | Model: BK85H WITH 1-1/8" BUSHING | PartNumber: BK85H WITH 1-1/8" BUSHING
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This 2 Piece Cast Iron Single Groove Pulley Takes 1 Belt And Includes The " H " Style Tapered Bushing..
Features
- 8.25" Outside Diameter , Fits 1-1/8" Shaft Diameter. 1/4 Keyway Is Standard For 1-1/8" Shaft, 182t & 184t Frame Motors. Keyway Not Included.
- This 2 Piece Cast Iron Single Groove Pulley Takes 1 Belt And Includes The H Style Tapered Bushing.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #8
Brass, 1/4" NPT Industrial Soft Seat Safety Pressure Relief Valve, Made In The USA (110 PSI / 100 SCFM)
Asin: B0B3Y8XZQN | Model: SRV250-14 | PartNumber: SRV250-14
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/4" Npt Measures 0.540" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 110 PSI And Has a Flow Rate (SCFM) Of 100
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/4 NPT Measures 0.540 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 1.75 x 0.69 x 0.69 Inches
See On Amazon #9
Double Groove 11.75" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 2 Groove Pulley (No Bushing/Standalone Pulley, 2BK120H)
Asin: B0BWSK5VLW | Model: 2BK120H | PartNumber: 2BK120H
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
This Cast Iron Double Groove Pulley Takes 2 Belts. The Pulley Is Only To Be Used With " H " Style Tapered Bushings..
Features
- 11.75" Outside Diameter , Double Groove H Style Pulley With No Bushing
- This Cast Iron Double Groove Pulley Takes 2 Belts. The Pulley Is Only To Be Used With H Style Tapered Bushings.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #10
Brass, 1/4" NPT Economy Soft Seat Safety Pressure Relief Valve, Made In The USA (180 PSI / 87 SCFM)
Asin: B0B3NH37BB | Model: SRV187-14 | PartNumber: SRV187-14
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/4" Npt Measures 0.540" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 180 PSI And Has a Flow Rate (SCFM) Of 87
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/4 NPT Measures 0.540 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 1.70 x 0.56 x 0.56 Inches
See On Amazon #11
Dry Lower Mount Vacuum Gauge with 2.5" Dial, 30" Hg VAC/15 PSI, (-30-15 PSI), 1/4" Male NPT, Chrome Bezel, Brass Internals and Plastic Lens (1)
Asin: B0C21L8HJ9
Dry Non-Fillable Gauge, Polycarbonate Lens, Black Steel Case, Brass Internals, Chrome Bezel, Phosphor Bronze Tube, Brass Socket And Movement.
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data.
Please Note: 1/4" Male Npt Measures 0.540" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
Features
- LOWER MOUNT DRY VACUUM PRESSURE GAUGE, FACE/DIAL SIZE 2-1/2", 1/4" MALE NPT CONNECTION, 30" Hg VAC/15 PSI, (-30 - 15 PSI), RANGE
- PLEASE NOTE: 1/4 MALE NPT MEASURES 0.540 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- DRY NON-FILLABLE GAUGE, POLYCARBONATE LENS, BLACK STEEL CASE, BRASS INTERNALS, CHROME BEZEL, PHOSPHOR BRONZE TUBE, BRASS SOCKET AND MOVEMENT
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #12
Brass, 1/4" NPT Economy Soft Seat Safety Pressure Relief Valve, Made In The USA (115 PSI / 57 SCFM)
Asin: B0B3NHCFVT | Model: SRV187-14 | PartNumber: SRV187-14
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/4" Npt Measures 0.540" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 115 PSI And Has a Flow Rate (SCFM) Of 57
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/4 NPT Measures 0.540 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 1.70 x 0.56 x 0.56 inches
See On Amazon #13
Double Groove 3.05" Cast Iron Electric Motor " H " Pulley/Sheave, Bushing Included, for 3/8" and 1/2" Top Width 3L/A/AK/4L/4LK Section V Belt, 2 Groove (3/4" Shaft / 0.75 Bore, 2AK30H)
Asin: B0BTJBV3NP | Model: 2AK30H WITH 3/4" BUSHING | PartNumber: 2AK30H WITH 3/4" BUSHING
Groove Will Fit 1/2" Top Width V-Belt Types Belts ( A / 4L / Ak / 4Lk / Ax ).
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This Cast Iron Double Groove Pulley Takes 2 Belts And Includes The " H " Style Tapered Bushing.
Features
- 3.05" Outside Diameter , Fits 3/4" Shaft Diameter. 3/16 Keyway Is Standard For 3/4" Shaft. Keyway Not Included.
- This Cast Iron Double Groove Pulley Takes 2 Belts And Includes The H Style Tapered Bushing
- Groove Will Fit 1/2 Top Width V-Belt Types Belts ( A / 4L / AK / 4LK / AX )
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #14
Liquid Filled Center Back Mount Pressure Gauge with 2.5" Dial, 30" Hg VAC/300 PSI, (-30-300 PSI), 1/4" Male NPT, Stainless Steel CASE and Bezel (1)
Asin: B0C1ZZHB9S
Please Note: 1/4" Male Npt Measures 0.540" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data, Psi/Bar.
Glycerin Filled, Polycarbonate Lens, Stainless Steel Case & Bezel, Copper Alloy Internals, Black Aluminum Pointer, Design Meets Or Exceeds Asme B40.100 Pressure Gauge Standard.
Center Back Mount Glycerin Filled Vacuum Pressure Gauge, Face/Dial Size 2-1/2", 1/4" Male Npt Connection, 30" Hg Vac/300 Psi, (-30 - 300 Psi), Range.
Features
- LIQUID/GLYCERIN FILLED GAUGES ARE SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE VIBRATION AND PULSATION IS PRESENT
- CENTER BACK MOUNT GLYCERIN FILLED VACUUM PRESSURE GAUGE, FACE/DIAL SIZE 2-1/2, 1/4 MALE NPT CONNECTION, 30 Hg VAC/300 PSI, (-30 - 300 PSI), RANGE
- PLEASE NOTE: 1/4 MALE NPT MEASURES 0.540 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- GLYCERIN FILLED, POLYCARBONATE LENS, STAINLESS STEEL CASE & BEZEL, COPPER ALLOY INTERNALS, BLACK ALUMINUM POINTER, DESIGN MEETS OR EXCEEDS ASME B40.100 PRESSURE GAUGE STANDARD
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA, PSI/BAR
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #15
Brass, 1/8" NPT Industrial Soft Seat Safety Pressure Relief Valve, Made In The USA (80 PSI / 76 SCFM)
Asin: B0B3NKGDS1 | Model: SRV250-18 | PartNumber: SRV250-18
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/8" Npt Measures 0.405" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 80 PSI And Has a Flow Rate (SCFM) Of 76
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/8 NPT Measures 0.405 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 1.75 x 0.69 x 0.69 Inches
See On Amazon #16
2 Pack of Liquid Filled Center Back Mount Pressure Gauge with 4" Dial, 0-100 PSI, 1/4" Male NPT Connection, Stainless Steel CASE and Bezel (2)
Asin: B0BZ57G51K
Please Note: 1/4" Male Npt Measures 0.540" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data, Psi/Bar.
Glycerin Filled, Polycarbonate Lens, Stainless Steel Case & Bezel, Copper Alloy Internals, Black Aluminum Pointer, Design Meets Or Exceeds Asme B40.100 Pressure Gauge Standard.
2 Pack Of Center Back Mount Glycerin Filled Pressure Gauge, Face/Dial Size 4", 1/4" Male Npt Connection, 0-100 Psi Range.
Features
- LIQUID/GLYCERIN FILLED GAUGES ARE SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE VIBRATION AND PULSATION IS PRESENT
- 2 PACK OF CENTER BACK MOUNT GLYCERIN FILLED PRESSURE GAUGE, FACE/DIAL SIZE 4, 1/4 MALE NPT CONNECTION, 0-100 PSI RANGE
- PLEASE NOTE: 1/4 MALE NPT MEASURES 0.540 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- GLYCERIN FILLED, POLYCARBONATE LENS, STAINLESS STEEL CASE & BEZEL, COPPER ALLOY INTERNALS, BLACK ALUMINUM POINTER, DESIGN MEETS OR EXCEEDS ASME B40.100 PRESSURE GAUGE STANDARD
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA, PSI/BAR
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #17
Brass, 1/4" NPT Industrial Hard Seat Safety Pressure Relief Valve, Made In The USA (100 PSI / 89 SCFM)
Asin: B0B3JV8D64 | Model: SRH250-14 | PartNumber: SRH250-14
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/4" Npt Measures 0.540" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 100 PSI And Has a Flow Rate (SCFM) Of 89
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/4 NPT Measures 0.540 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 2.00 x 0.69 x 0.69 Inches
See On Amazon #18
Single Groove 5.25" Cast Iron Electric Motor " H " Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 1 Groove Pulley (1-3/8" Shaft / 1.375 Bore, BK55H)
Asin: B0BVN15M9K | Model: BK55H WITH 1-3/8" BUSHING | PartNumber: BK55H WITH 1-3/8" BUSHING
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This 2 Piece Cast Iron Single Groove Pulley Takes 1 Belt And Includes The " H " Style Tapered Bushing..
Features
- 5.25" Outside Diameter , Fits 1-3/8" Shaft Diameter. 5/16 Keyway Is Standard For 1-3/8" Shaft, 213T & 215T Frame Motors. (Keyway Included).
- This 2 Piece Cast Iron Single Groove Pulley Takes 1 Belt And Includes The H Style Tapered Bushing.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #19
Brass, 1/8" NPT Industrial Hard Seat Safety Pressure Relief Valve, Made In The USA (80 PSI / 74 SCFM)
Asin: B0B32QRHHV | Model: SRH250-18 | PartNumber: SRH250-18
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/8" Npt Measures 0.405" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- Preset at 80 PSI And Has a Flow Rate (SCFM) Of 74
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/8 NPT Measures 0.405 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 2.00 x 0.69 x 0.69 inches
See On Amazon #20
Double Groove 6.75" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 2 Groove Pulley (1" Shaft / 1.00 Bore, 2BK70H)
Asin: B0BWSKGQFN | Model: 2BK70H WITH 1" BUSHING | PartNumber: 2BK70H WITH 1" BUSHING
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The " H " Style Tapered Bushing..
Features
- 6.75" Outside Diameter , Fits 1" Shaft Diameter. 1/4" Keyway Is Standard For 1" Shaft. Keyway Not Included
- This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The H Style Tapered Bushing.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #21
Brass, 1/4" NPT Industrial Hard Seat Safety Pressure Relief Valve, Made In The USA (30 PSI / 34 SCFM)
Asin: B0B3GBKNT8 | Model: SRH250-14 | PartNumber: SRH250-14
This Safety Valve Has An Operating Temperature Range Of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Other Thread Sizes And Psi Options Are Available. Please Reach Out With Questions..
Please Note 1/4" Npt Measures 0.540" Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
This Safety Valve Is Made In The Usa.
Features
- This Brass Safety Valve Is Preset At 30 PSI And Has a Flow Rate (SCFM) Of 34
- This Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
- Please Note 1/4 NPT Measures 0.540 Outside thread diameter in inches. See attached NPT Thread chart.
- Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Conrader
Dimensions: 2.00 x 0.69 x 0.69 Inches
See On Amazon #22
Double Groove 5.25" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 2 Groove Pulley (1-1/8" Shaft / 1.125" Bore, 2BK55H)
Asin: B0BWSKND79 | Model: 2BK55H WITH 1-1/8" BUSHING | PartNumber: 2BK55H WITH 1-1/8" BUSHING
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The " H " Style Tapered Bushing..
Features
- 5.25" Outside Diameter , Fits 1-1/8" Shaft Diameter. 1/4 Keyway Is Standard For 1-1/8" Shaft, 182T & 184T Frame Motors. Keyway Not Included.
- This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The H Style Tapered Bushing.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #23
Liquid Filled Center Back Mount Pressure Gauge with 2.5" Dial, 0-400 PSI, 1/4" Male NPT Connection, Stainless Steel CASE and Bezel (1)
Asin: B0BYQTTMJR
Please Note: 1/4" Male Npt Measures 0.540" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data, Psi/Bar.
Glycerin Filled, Polycarbonate Lens, Stainless Steel Case & Bezel, Copper Alloy Internals, Black Aluminum Pointer, Design Meets Or Exceeds Asme B40.100 Pressure Gauge Standard.
Center Back Mount Glycerin Filled Pressure Gauge, Face/Dial Size 2-1/2", 1/4" Male Npt Connection, 0-400 Psi Range.
Features
- LIQUID/GLYCERIN FILLED GAUGES ARE SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE VIBRATION AND PULSATION IS PRESENT
- CENTER BACK MOUNT GLYCERIN FILLED PRESSURE GAUGE, FACE/DIAL SIZE 2-1/2, 1/4 MALE NPT CONNECTION, 0-400 PSI RANGE
- PLEASE NOTE: 1/4 MALE NPT MEASURES 0.540 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- GLYCERIN FILLED, POLYCARBONATE LENS, STAINLESS STEEL CASE & BEZEL, COPPER ALLOY INTERNALS, BLACK ALUMINUM POINTER, DESIGN MEETS OR EXCEEDS ASME B40.100 PRESSURE GAUGE STANDARD
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA, PSI/BAR
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #24
Double Groove 3.35" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 2 Groove Pulley (1-1/8" Shaft / 1.125" Bore, 2BK32H)
Asin: B0BWSDC8ZJ | Model: 2BK32H WITH 1-1/8" BUSHING | PartNumber: 2BK32H WITH 1-1/8" BUSHING
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The " H " Style Tapered Bushing..
Features
- 3.35" Outside Diameter , Fits 1-1/8" Shaft Diameter. 1/4 Keyway Is Standard For 1-1/8" Shaft, 182T & 184T Frame Motors. Keyway Not Included.
- This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The H Style Tapered Bushing.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #25
Kingston 1/4 NPT Brass Soft Seat Industrial Pressure Relief Valve, Made In The USA. (125 PSI / 110 SCFM)
Asin: B0C953VCKD | Model: KSV25-2-125 | PartNumber: KSV25-2-125
This Safety Valve Has An Operating Temperature Of -20 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Please Note 1/4 Inch Npt Measures 0.540 Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
Designed To Api 527 Seat Tightness Standard. Silicone Disc Standard..
This Kingston Safety Valve Is Made In The Usa.
Features
- This Safety Pressure Relief Valve Is Preset At 125 PSI And Has a Flow Rate (SCFM) Of 110
- This Kingston Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature of -20 Degrees Fahrenheit to 400 Degrees Fahrenheit
- Designed to API 527 Seat Tightness Standard. Silicone Disc Standard.
- Please Note 1/4 Inch NPT Measures 0.540 Outside Thread Diameter in Inches. See Attached NPT Thread Chart.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Kingston
See On Amazon #26
Liquid Filled Lower Mount Pressure Gauge with 2" Dial, 0-5000 PSI, 1/8" Male NPT Connection, Stainless Steel CASE and Bezel (1)
Asin: B0BZ9LDY4S
Please Note: 1/8" Male Npt Measures 0.405" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data, Psi/Bar.
Glycerin Filled, Polycarbonate Lens, Stainless Steel Case & Bezel, Copper Alloy Internals, Black Aluminum Pointer, Design Meets Or Exceeds Asme B40.100 Pressure Gauge Standard.
Lower Mount Glycerin Filled Pressure Gauge, Face/Dial Size 2", 1/8" Male Npt Connection, 0-5000 Psi Range.
Features
- LIQUID/GLYCERIN FILLED GAUGES ARE SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE VIBRATION AND PULSATION IS PRESENT
- LOWER MOUNT GLYCERIN FILLED PRESSURE GAUGE, FACE/DIAL SIZE 2, 1/8 MALE NPT CONNECTION, 0-5000 PSI RANGE
- PLEASE NOTE: 1/8 MALE NPT MEASURES 0.405 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- GLYCERIN FILLED, POLYCARBONATE LENS, STAINLESS STEEL CASE & BEZEL, COPPER ALLOY INTERNALS, BLACK ALUMINUM POINTER, DESIGN MEETS OR EXCEEDS ASME B40.100 PRESSURE GAUGE STANDARD
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA, PSI/BAR
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #27
2 Pack of Liquid Filled Lower Mount Pressure Gauge with 2" Dial, 0-200 PSI, 1/8" Male NPT Connection, Stainless Steel CASE and Bezel (2)
Asin: B0BZ9P9Q17
Please Note: 1/8" Male Npt Measures 0.405" Outside Thread Diameter. These Are Industrial Gauges And Not Deemed Lead Free. Do Not Use With Potable Water Applications..
3/2/3% Accuracy, Ambient Temperature -50F To 160F, See Additional Pics For Dimensional Data, Psi/Bar.
Glycerin Filled, Polycarbonate Lens, Stainless Steel Case & Bezel, Copper Alloy Internals, Black Aluminum Pointer, Design Meets Or Exceeds Asme B40.100 Pressure Gauge Standard.
2 Pack Of Lower Mount Glycerin Filled Pressure Gauge, Face/Dial Size 2", 1/8" Male Npt Connection, 0-200 Psi Range.
Features
- LIQUID/GLYCERIN FILLED GAUGES ARE SPECIFICALLY DESIGNED FOR APPLICATIONS WHERE VIBRATION AND PULSATION IS PRESENT
- 2 PACK OF LOWER MOUNT GLYCERIN FILLED PRESSURE GAUGE, FACE/DIAL SIZE 2, 1/8 MALE NPT CONNECTION, 0-200 PSI RANGE
- PLEASE NOTE: 1/8 MALE NPT MEASURES 0.405 OUTSIDE THREAD DIAMETER. THESE ARE INDUSTRIAL GAUGES AND NOT DEEMED LEAD FREE. DO NOT USE WITH POTABLE WATER APPLICATIONS.
- GLYCERIN FILLED, POLYCARBONATE LENS, STAINLESS STEEL CASE & BEZEL, COPPER ALLOY INTERNALS, BLACK ALUMINUM POINTER, DESIGN MEETS OR EXCEEDS ASME B40.100 PRESSURE GAUGE STANDARD
- 3/2/3% ACCURACY, AMBIENT TEMPERATURE -50f TO 160f, SEE ADDITIONAL PICS FOR DIMENSIONAL DATA, PSI/BAR
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #28
Double Groove 3.95" Cast Iron Electric Motor" H" Pulley/Sheave, Bushing Included, for 5/8" Top Width B/5L/BK/5LK Section V Belt, 2 Groove Pulley (1-1/8" Shaft / 1.125" Bore, 2BK40H)
Asin: B0BWSL4VWH | Model: 2BK40H WITH 1-1/8" BUSHING | PartNumber: 2BK40H WITH 1-1/8" BUSHING
Groove Will Fit The Following V-Belt Type (5/8" Top Width 5L / 5Lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2" Top Width Belts ( A / 4L / Ak / 4Lk / Ax ) However The Belt Will Sit 1/4" To 1/2" Deeper In The Grooves On Average..
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The " H " Style Tapered Bushing..
Features
- 3.95" Outside Diameter , Fits 1-1/8" Shaft Diameter. 1/4 Keyway Is Standard For 1-1/8" Shaft, 182T & 184T Frame Motors. Keyway Not Included.
- This 2 Piece Cast Iron Single Groove Pulley Takes 2 Belts And Includes The H Style Tapered Bushing.
- Groove Will Fit The Following V-belt Type (5/8 Top Width 5l / 5lk / B / Bk / Bx ). This Pulley Will Also Fit 1/2 Top Width Belts ( A / 4l / Ak / 4lk / Ax ) However The Belt Will Sit 1/4 To 1/2 Deeper In The Grooves On Average.
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon #29
Kingston 1/4 NPT Brass Soft Seat Industrial Pressure Relief Valve, Made In The USA. (20 PSI / 27 SCFM)
Asin: B0C94Z4JZV | Model: KSV25-2-20 | PartNumber: KSV25-2-20
This Safety Valve Has An Operating Temperature Of -20 Degrees Fahrenheit To 400 Degrees Fahrenheit.
Please Note 1/4 Inch Npt Measures 0.540 Outside Thread Diameter In Inches. See Attached Npt Thread Chart..
Designed To Api 527 Seat Tightness Standard. Silicone Disc Standard..
This Kingston Safety Valve Is Made In The Usa.
Features
- This Safety Pressure Relief Valve Is Preset At 20 PSI And Has a Flow Rate (SCFM) Of 27
- This Kingston Safety Valve Is Made In The USA
- This Safety Valve Has An Operating Temperature of -20 Degrees Fahrenheit to 400 Degrees Fahrenheit
- Designed to API 527 Seat Tightness Standard. Silicone Disc Standard.
- Please Note 1/4 Inch NPT Measures 0.540 Outside Thread Diameter in Inches. See Attached NPT Thread Chart.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: Kingston
See On Amazon #30
Double Groove 5.45" Cast Iron Electric Motor " H " Pulley/Sheave, Bushing Included, for 3/8" and 1/2" Top Width 3L/A/AK/4L/4LK Section V Belt, 2 Groove (7/8" Shaft / 0.875 Bore, 2AK56H)
Asin: B0BTQ52XMD | Model: 2AK56H WITH 7/8" BUSHING | PartNumber: 2AK56H WITH 7/8" BUSHING
Groove Will Fit 1/2" Top Width V-Belt Types Belts ( A / 4L / Ak / 4Lk / Ax ).
Motor Pulley Is Made Of Cast Iron, The H Bushing Is Made From C45 Steel With Black Oxide Finish..
The Tapered Bushing Locks Onto Your Motor Shaft As You Screw Down The Lock Screws, Resulting In A Super Tight Industrial Tapered Lock..
This Cast Iron Double Groove Pulley Takes 2 Belts And Includes The " H " Style Tapered Bushing.
Features
- 5.45" Outside Diameter , Fits 7/8" Shaft Diameter. 3/16 Keyway Is Standard For 7/8" Shaft, 56hz, 145t, 182y Frame Motors. Keyway Not Included.
- This Cast Iron Double Groove Pulley Takes 2 Belts And Includes The H Style Tapered Bushing
- Groove Will Fit 1/2 Top Width V-Belt Types Belts ( A / 4L / AK / 4LK / AX )
- The Tapered Bushing Locks onto Your Motor Shaft as You Screw Down the Lock Screws, Resulting in a Super Tight Industrial Tapered Lock.
- Motor Pulley Is Made of Cast Iron, The H Bushing Is Made from C45 Steel with Black Oxide Finish.
- See more on Amazon...
Brand: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS | Manufacturer: PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
See On Amazon