PSI Woodworking - Buying Guide
Last Updated: 04/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT
Asin: B01MA26GPP | Model: LCENT3210 | PartNumber: LCENT3210 | Ean: 0718122015306 | UPC: 718122015306
Spring-Loaded Center Point Simplifies Positioning Of Your Spindle.
Spring-Loaded Center Point Helps Avoid Splitting Your Work Piece.
Spring-Loaded Center Point Retracts When Tailstock Pressure Is Applied.
Sharp Spurs Give A Strong Bite Into Wood Work Piece.
Features
- 1" Diameter with #2MT
- Sharp spurs give a strong bite into wood work piece
- Spring-loaded center point simplifies positioning of your spindle
- Spring-loaded center point retracts when tailstock pressure is applied
- Spring-loaded center point helps avoid splitting your work piece
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 1.00 x 4.00 x 1.00 Inches | Weight: 0.45 Pounds
Warranty: 2 years with normal use
See On Amazon #2
PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2" 2MT)
Asin: B004CVJC20 | Model: TM32 | PartNumber: TM32 | Ean: 7241870660687, 0798167749176, 7566908051184, 0718122018208, 5272003698286 | UPC: 718122018208, 798167749176
The #2Mt Arbor Accepts 1/4" X 20Tpi Draw Bolt; Draw Bolt Not Included.
Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More.
Removes Easily With Knock Out Bar.
This 3-Jaw Chuck Will Mount Into The Headstock Or Tailstock Of Any Lathe That Accepts #2Mt Accessories.
Features
- Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key
- This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
- The #2MT Arbor accepts 1/4 x 20tpi draw bolt; Draw bolt not included
- Removes easily with knock out bar
- Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Warranty: 2 Years Under Normal Use
See On Amazon #3
PSI Woodworking PKMSTS2 Live Tailstock Mandrel Saver #2 Morse Taper
Asin: B004CVJC4S | Model: PKMSTS2 | PartNumber: PKMSTS2 | Ean: 7535001644319, 0718122017607, 8850535109523 | UPC: 718122017607
There Is No Longer A Need For Spacer Bushings.
Compatible With Lathes That Accept #2Mt Accessories In Tailstock.
Will Work With All Mandrels With A Diameter Of 0. 245" Or Less.
Provides No Pressure On The Tailstock End Of The Mandrel Shaft Thus Eliminating Any Bending Or Vibration.
Features
- Unique design to support the end of your penturning mandrel
- Provides no pressure on the tailstock end of the mandrel shaft thus eliminating any bending or vibration
- There is no longer a need for spacer bushings
- Will work with all mandrels with a diameter of 0. 245 or less
- Compatible with lathes that accept #2MT accessories in tailstock
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 1.70 x 3.80 x 1.80 inches | Weight: 0.40 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #4
PSI Woodworking LCCFILE Credit Card Diamond File Set
Asin: B076C2478J | Model: LCCFILE | PartNumber: LCCFILE | Ean: 0743031896883 | UPC: 743031896883
Sharpen Knives, Chisels, Router Bits, Saw Blades Scissors, Or Anything Else That Needs A Sharp Edge.
Ideal For Sharpening Removable Cutting Tips On Carbide Tipped Tools.
Set Includes (2) 3-1/4" X 2" 2-Sided Diamond Files: 400X Fine & 600X Extra Fine Grits.
Features
- Sharpens HSS, carbon steel, and Carbide
- Set includes (2) 3-1/4 x 2 2-sided diamond files: 400x fine & 600x extra fine grits
- Sharpen knives, chisels, Router bits, saw blades scissors, or anything else that needs a sharp edge
- Ideal for sharpening removable cutting tips on Carbide tipped tools
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 3.25 x 2.00 x 0.04 Inches | Weight: 0.10 pounds
Warranty: 2 years under normal use
See On Amazon #5
PSI Woodworking LA3418X Lathe Headstock Spindle Adapter 3/4" x 16tpi to 1" x 8tpi
Asin: B08C46WHGY | Model: LA3418X | PartNumber: LA3418X | Ean: 0810011935556 | UPC: 810011935556
Made Of Steel.
Flats Allow For Solid Wrench Tool Grip For Tightening And Loosening.
Weighs .2 Pounds.
Allows A 3/4" X 16Tpi Threaded Spindle To Accept 1" X 8Tpi Threaded Chucks, Faceplates, And Other Woodturning Tools And Accessories.
Features
- Convert a 3/4" x 16tpi lathe headstock spindle to 1" x 8tpi
- Allows a 3/4 x 16tpi threaded spindle to accept 1 x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories
- Made of steel
- Weighs .2 pounds
- Flats allow for solid wrench tool grip for tightening and loosening
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Weight: 0.20 Pounds
Warranty: 2 Years Under Normal Use
See On Amazon #6
PSI Woodworking PKCPBAPAK 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Kit Starter Package Woodturning Project
Asin: B00TUYCV9U | Model: PKCPBAPAK | PartNumber: PKCPBAPAK | Ean: 0718122772193 | UPC: 718122772193
Also Includes The Bushing Set (Pkcp3000bu) Needed To Make The Pens.
Patent No. : Us D682, 352 S. Pen Blanks Are Not Included. The Realistic Bolt Action Handle Smoothly Advances And Retracts To Securely Lock The Refill In Place. Each Pen Kit Includes A Bolt Action Rifle Clip, A Replica 30 Caliber Cartridge, And A Rose Gold Bullet Tip..
Features A 3/8" Single Tube Design, Our Patented Bolt Action Mechanism, And A Parker Style Ballpoint Black Refill. Minimum Blank Size Needed To Turn Is 3/4" X 3/4" X 2-1/2"..
Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You Will Receive (1) Of Each In: Gun Metal (Pkcp8020), Chrome (Pkcp8010), And Gold (Pkcp8000).
Features
- This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included.
- Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You will receive (1) of each in: Gun Metal (PKCP8020), Chrome (PKCP8010), and Gold (PKCP8000)
- Also includes the bushing set (PKCP3000BU) needed to make the pens
- Features a 3/8 single tube design, our patented bolt action mechanism, and a Parker style ballpoint black refill. Minimum blank size needed to turn is 3/4 x 3/4 x 2-1/2.
- Patent No. : US D682, 352 S. Pen blanks are not included. The realistic bolt action handle smoothly advances and retracts to securely lock the refill in place. Each pen kit includes a bolt action rifle clip, a replica 30 caliber cartridge, and a rose gold bullet tip.
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 9.00 x 8.00 x 0.50 Inches
See On Amazon #7
PSI Woodworking LCSIDE2 Round End Inboard Side Scraper 2pc Chisel Set
Asin: B000N4LR2I | Model: LCSIDE2 | PartNumber: LCSIDE2 | Ean: 7241870627567, 0718122011803, 7566908072660 | UPC: 718122011803
Larger Scraper: 19" Overall Length With 6" Blade And 13" Handle; Blade Is 1" Wide And 3/8" Thick.
Designed For Blending The Parallel Side Wall And The Curved Bottom Of Vessels And Boxes Together; Ideal For Deep Hollowing And Making Final Cuts Inside Bowls; Also Excellent For Undercutting The Rim Of Small Bowls.
Smaller Scraper: 16" Overall Length With 6" Blade And 10" Handle; Blade Is 3/4" Wide And 5/16" Thick.
Blades Are Made From M2 High Speed Steel.
Features
- Create a clean, smooth finish with these heavy-duty round end inboard scrapers; Thick, stable blades all you to cut aggressively without vibration
- Blades are made from M2 High Speed Steel
- Larger Scraper: 19 overall length with 6 blade and 13 handle; Blade is 1 wide and 3/8 thick
- Smaller Scraper: 16 overall length with 6 blade and 10 handle; Blade is 3/4 wide and 5/16 thick
- Designed for blending the parallel side wall and the curved bottom of vessels and boxes together; Ideal for deep hollowing and making final cuts inside bowls; Also excellent for undercutting the rim of small bowls
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 1.69 x 26.30 x 4.09 Inches | Weight: 2.71 Pounds
Warranty: 2 Years Under Normal Use
See On Amazon #8
PSI Woodworking PENPRESSXL Assembly & Disassembly Pen Press
Asin: B06Y4C8JD1 | Model: PENPRESSXL | PartNumber: PENPRESSXL | Ean: 0638370139817 | UPC: 638370139817
Provides 250 Lbs Of Pressure; Spring-Loaded Ram Acts As A 3Rd Hand For Quick, Easy Parts Positioning; Sled Mechanism Slides The Stop Into Position; Locking Lever Then Securely Locks The Rod In Place.
The (6) Disassembly Rods Handle Nearly All Tube Diameters And Parts Configurations, Including Pen Tips And Clips; Dedicated 7Mm Bushing Allows For Disassembly Of Any 7Mm Pen; Soft-Grip Tube And V-Profile Clamp Provides Parts Protection During Disassembly Process.
Included Components: (1) Press Assembly With Adjustment Sled And Handle, (6) Disassembly Rods, (1) Spring-Loaded Stopper, 6" Of Soft-Grip Tubing, (1) 7Mm Mechanism Bushing For Parts Protection.
Features
- Assemble and disassemble pen parts on one easy to use tool; Acts as traditional pen press to press your pen parts together; Disassembly function provides invaluable way to take virtually any pen apart
- Included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6 of soft-grip tubing, (1) 7mm mechanism bushing for parts protection
- Provides 250 lbs of pressure; Spring-loaded ram acts as a 3rd hand for quick, easy parts positioning; Sled mechanism slides the stop into position; Locking lever then securely locks the rod in place
- The (6) disassembly rods handle nearly all tube diameters and parts configurations, including pen tips and clips; Dedicated 7mm bushing allows for disassembly of any 7mm pen; Soft-grip tube and V-profile clamp provides parts protection during disassembly process
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 4.25 x 17.50 x 4.50 Inches | Weight: 4.00 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #9
PSI Woodworking LCHSS8 Wood Lathe 8pc HSS Chisel Set
Asin: B000KI8CTS | Model: LCHSS8 | PartNumber: LCHSS8 | Ean: 0689076541190, 0798167697439 | UPC: 798167697439, 689076541190
Set Includes (8) Chisels 3/16" Parting Tool 5/8" Spear Scraper 1" Skew Chisel 5/8" Skew Chisel 5/8" Round Nose Scraper 1/2" Bowl Gouge 3/4" Spindle Gouge 7/8" Roughing Gouge.
Great For Woodworkers Woodturners And Penturners Of All Skill Levels.
Includes Wooden Case For Storage And Carrying.
Each Chisel Measures 16-1/4" In Length With A 6-1/4" M2 High Speed Steel Blade And A 10" Hardwood Turned Handles.
Features
- Ideal chisel kit for turning pens pepper mills spindles bowls and lots more woodturning projects of all sizes
- Each chisel measures 16-1/4 in length with a 6-1/4 M2 High Speed Steel blade and a 10 hardwood turned handles
- Set includes (8) chisels 3/16 Parting Tool 5/8 Spear Scraper 1 Skew Chisel 5/8 Skew Chisel 5/8 Round Nose Scraper 1/2 Bowl Gouge 3/4 Spindle Gouge 7/8 Roughing Gouge
- Includes wooden case for storage and carrying
- Great for woodworkers woodturners and penturners of all skill levels
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 13.50 x 18.00 x 2.00 Inches
Warranty: 2 Years Under Normal Use
See On Amazon #10
PSI Woodworking CF3SC 3" Lathe Faceplate/Screwchuck for 1" x 8tpi Spindle
Asin: B079M78BB5 | Model: CF3SC | PartNumber: CF3SC | Ean: 0718122014200 | UPC: 718122014200
(4) Mounting Holes With Additional Screw Chuck Option.
Combination Of Screw Chuck & Faceplate Mount Provides A Very Safe & Secure Bowl Turning Setup.
Includes (2) 1" Screw Chucks And (8) Spare Mounting Screws.
Pre-Threaded To 1" X 8Tpi.
Features
- 3" Steel faceplate with screw chuck
- Pre-threaded to 1 x 8TPI
- (4) mounting holes with additional screw chuck option
- Includes (2) 1 screw chucks and (8) spare mounting screws
- Combination of screw chuck & faceplate mount provides a very safe & secure bowl turning setup
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 3.00 x 3.00 x 2.00 inches | Weight: 1.00 pounds
Warranty: 2 years under normal use
See On Amazon #11
PSI Woodworking PKTRIM7C Pen Kit Barrel Trimmer 7mm Shaft with 5/8" Carbide Cutter Head & Allen Wrench
Asin: B08TFHVYZ5 | Model: PKTRIM7C | PartNumber: PKTRIM7C | Ean: 0810011939486 | UPC: 810011939486
Shaft Acts As A Pilot For The Cutting Head And Helps Remove Excess Glue From The Tube.
Barrel Trimming And Squaring Is An Essential Step In Penturning Projects To Ensure A Proper Fit Between The Pen Kit Hardware Parts And The Turned Blank.
Shaft Will Fit Into A Drill Chuck Or Lathe Chuck.
Square The End Of Your Pen Blanks And Pen Tubes Prior To Turning On The Lathe And Pen Kit Assembly.
Features
- Includes 7mm Pilot Shaft, 5/8" Carbide Cutter Head, and Allen Wrench
- Square the end of your pen blanks and pen tubes prior to turning on the lathe and pen kit assembly
- Shaft acts as a pilot for the cutting head and helps remove excess glue from the tube
- Shaft will fit into a drill chuck or lathe chuck
- Barrel trimming and squaring is an essential step in penturning projects to ensure a proper fit between the pen kit hardware parts and the turned blank
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
See On Amazon #12
PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center
Asin: B000KIEPSA | Model: LCENTLT2 | PartNumber: LCENTLT2
Ean: 0689076540797, 5915903734592, 6007795102388, 6935188013273, 7535001403503, 0733353670605, 0716080056737
UPC: 689076540797, 716080056737, 733353670605
Ball Bearing Precision; Turns Smoothly.
Cone Is 2-1/2" By 1-11/16" Overall Diameter.
Huge Live Center For Heavy Duty Workpieces.
60-Degree Point.
Features
- Large live lathe center
- 60-degree point
- Ball bearing precision; turns smoothly
- Huge live center for heavy duty workpieces
- Cone is 2-1/2 by 1-11/16 overall diameter
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 2.00 x 5.50 x 2.00 inches | Weight: 0.99 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #13
PSI Woodworking PKLPRESS Between Centers Pen Press for Lathe Woodturning Projects
Asin: B09BRCS7LL | Model: PKLPRESS | PartNumber: PKLPRESS | Ean: 0810011936010 | UPC: 810011936010
Headstock End Part Is Spring-Loaded With Hard Plastic To Protect Pen Components.
Ideal For Most Penturning And Woodturning Projects That Require Parts To Be Pressed Togther; Maximum Workpiece Length Depends On Your Lathe's Distance Between Centers.
Center Hole On The Plastic Face To Secure The Pen Nib While Pressure Is Being Exterted From The Tailstock End.
Requires A #2 Morse Taper Opening On Your Lathe's Headstock And Tailstock Spindle.
Features
- Assemble your pen making parts together directly on your lathe with this standalone press
- Requires a #2 morse taper opening on your lathe's headstock and tailstock spindle
- Headstock end part is spring-loaded with hard plastic to protect pen components
- Center hole on the plastic face to secure the pen nib while pressure is being exterted from the tailstock end
- Ideal for most penturning and woodturning projects that require parts to be pressed togther; Maximum workpiece length depends on your lathe's distance between centers
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Warranty: 2 Years Under Normal Use
See On Amazon #14
PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System
Asin: B004CVJBYE | Model: LBUFFSYS | PartNumber: LBUFFSYS | Ean: 0718122017904 | UPC: 718122017904
Requires A Lathe With A Minimum Of 1/2 Horsepower And A Heavy Duty Live Tailstock Center.
Replacement Wheels And Buffing Compound Bars Are Available; Tripoli: Bar (Lbuffx1) & Linen Wheel (Lbuffw1); White Diamond: Bar (Lbuffx2) & Linen/Flannel Wheel (Lbuffw2); Carbuba Wax: Bar (Lbuffx3) & Flannel Wheel (Lbuffw3).
For Best Results, Pre-Treat Your Workpiece With Danish Oil.
System Includes: (1) #2Mt 16" Heavy Duty Mandrel, (3) 8" Fabric Buffing Wheels (Linen, Linen/Flannel Combo, Flannel), (3) Buffing Compound Bars (Tripoli, White Diamond, Carnuba Wax), Hardware Packet, And Instructions.
Features
- This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock
- System includes: (1) #2MT 16 heavy duty mandrel, (3) 8 fabric buffing wheels (Linen, Linen/Flannel Combo, Flannel), (3) buffing compound bars (Tripoli, White Diamond, Carnuba Wax), hardware packet, and instructions
- Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center
- For best results, pre-treat your workpiece with danish oil
- Replacement wheels and buffing compound bars are available; Tripoli: Bar (LBUFFX1) & Linen Wheel (LBUFFW1); White Diamond: Bar (LBUFFX2) & Linen/Flannel Wheel (LBUFFW2); Carbuba Wax: Bar (LBUFFX3) & Flannel Wheel (LBUFFW3)
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 3.00 x 17.50 x 9.75 inches | Weight: 7.20 pounds
Warranty: two years
See On Amazon #15
PSI Woodworking CJAWXL 8-1/4" Flat Jaws for PSI C-Series Lathe Woodturning Chucks
Asin: B08N5CQKN9 | Model: CJAWXL | PartNumber: CJAWXL | Ean: 0810011936355 | UPC: 810011936355
Includes (16) Soft Rubber Gripper Bumper Pins In Two Lengths To Securely Hold Your Workpiece: (8) 1/2" & (8) 3/4"; Pins Have A 6Mm Thread; Also Includes Allen Wrench.
Cjawxl Repaces Both Cjawfj1 And Cjawfj2.
Cjawxl Is A Psi C-Series Accessory That Is Compatible With All Psi C-Series Chucks (Csc3000c, Csc3500se, Cug3418cc, Cmg3c, Csc2000c).
Grips Workpieces From 2-3/4" To 8-1/4" Diameter; (7) Positions For Bowl Rim Placement; Made From Cast Aluminum; Weighs 1.50 Pounds.
Features
- Ideal for finishing and polishing woodturning bowl and plate bottoms
- Grips workpieces from 2-3/4 to 8-1/4 diameter; (7) positions for bowl rim placement; Made from cast aluminum; Weighs 1.50 pounds
- Includes (16) soft rubber gripper bumper pins in two lengths to securely hold your workpiece: (8) 1/2 & (8) 3/4; Pins have a 6mm thread; Also includes Allen Wrench
- CJAWXL is a PSI C-Series accessory that is compatible with all PSI C-Series chucks (CSC3000C, CSC3500SE, CUG3418CC, CMG3C, CSC2000C)
- CJAWXL repaces both CJAWFJ1 and CJAWFJ2
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Weight: 1.50 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #16
PSI Woodworking CLTSET58 Straight Bar 3pc Toolrest Set, 5/8" Diameter Post (15.875mm)
Asin: B004CVJBVW | Model: CLTSET58 | PartNumber: CLTSET58 | Ean: 0718122017706 | UPC: 718122017706
Post On All (3) Tool Rests Is 5/8" Diameter (15. 875Mm) And 2-3/4" Long.
Round Top Bar Is Also 5/8" Diameter.
The (3) Included Toolrests Have Top Bar Lengths Of 6", 9", And 12".
Smooth, Dense Steel Surface Allows The Tool To Glide Over The Bar For Vibration-Free Turning.
Features
- Heavy duty, solid round bar 3pc tool rest set provides ultimate chisel control for lots of different woodturning projects
- Smooth, dense steel surface allows the tool to glide over the bar for vibration-free turning
- Post on all (3) tool rests is 5/8 diameter (15. 875mm) and 2-3/4 long
- The (3) included toolrests have top bar lengths of 6, 9, and 12
- Round top bar is also 5/8 diameter
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 0.50 x 12.50 x 4.20 inches | Weight: 3.05 Pounds
Warranty: 2 Years Under Normal Use
See On Amazon #17
PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
Asin: B000KIACTG | Model: CSC3000C | PartNumber: CSC3000C | Ean: 0733353251774, 0732454549391, 7241870525535, 0689076537193, 0784497261495 | UPC: 689076537193, 732454549391, 784497261495, 733353251774
#1 Step Jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8"; #2 Round Jaws: 7/8" To 1-1/2" &1-1/4" To 2"; #3 Wide Bowl Jaws: 3-1/16" To 4-3/8"; Pin Jaws: 1" To 2-1/4".
This Is A C-Series Chuck; Compatible With All Additional C-Series Jaws And Accessories: 7-3/4" Jumbo Flat Jaws (Cjawfj2), 5" Small Flat Jaws (Cjawfj1), Set Of 2 Alligator Jaws (Lcaljaws), Pen Blank Drilling Jaws (Cjawpen), 8-1/4" Super Finishing Jaws (Cjawxl), And More!.
With The Variety Of Included Jaws, The Csc3000c Will Mount Most Turning Projects Onto Your Lathe; Including Bowls, Spindles, Pens, Other Small Turning Projects, And Much More.
Barracuda2 Chuck Body Is 3. 5" Diameter And Weighs 2.60 Lbs. ; Pre-Threaded To 1" X 8Tpi And Includes 3/4" X 16Tpi Spindle Adapter.
Features
- Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case
- Barracuda2 chuck body is 3. 5 Diameter and weighs 2.60 lbs. ; pre-threaded to 1 X 8TPI and includes 3/4 X 16TPI spindle adapter
- #1 step jaws: 3/32 To 1-3/8 & 11/16 To 2-3/8; #2 round jaws: 7/8 To 1-1/2 &1-1/4 To 2; #3 wide bowl jaws: 3-1/16 To 4-3/8; pin jaws: 1 To 2-1/4
- With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe; including bowls, spindles, pens, other small turning projects, and much more
- This is a C-Series Chuck; Compatible with all additional C-Series Jaws and accessories: 7-3/4 Jumbo Flat Jaws (CJAWFJ2), 5 Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4 Super Finishing Jaws (CJAWXL), and more!
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 5.25 x 10.20 x 5.00 Inches | Weight: 8.60 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #18
PSI Woodworking LSR3 Wood Lathe Steady Rest
Asin: B00AO01JII | Model: LSR3 | PartNumber: LSR3 | Ean: 0718122016105 | UPC: 718122016105
Non Marring Soft Wheels..
Compatible With Jet, Delta, And Turncrafter Pro Midi Lathes With Extension Beds..
Mounts In The Channel Of Any Split Bed Or Double Rail Lathe..
3-Point Ball Bearing Spindle Support..
Features
- Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2".
- 3-point ball bearing spindle support.
- Non marring soft wheels.
- Mounts in the channel of any split bed or double rail lathe.
- Compatible with Jet, Delta, and Turncrafter Pro Midi lathes with extension beds.
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 12.75 x 9.00 x 1.75 Inches | Weight: 8.49 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #19
PSI Woodworking PKDISET Pen Kit Disassembly Punch Set
Asin: B07DKY9SCZ | Model: PKDISET | PartNumber: PKDISET | Ean: 0721782104914 | UPC: 721782104914
Includes (28) Rods From 3/32" To 17/32" In Diameter.
For Easiest And Best Results, Use With Our Locking Soft-Grip Pliers For Pen Disassembly (Pkdisgrip).
Rods Are 4-7/8" (125Mm) Long And Made Of Hardened Alloy Steel With A Black Oxide Finish.
Disassembles Nearly All Pen And Pencil Kits With Tubes And Components Of Any Size.
Features
- Salvage your pen Parts, replace components, exchange components, and help avoid buying new pen Parts
- Disassembles nearly all pen and pencil kits with tubes and components of any size
- Includes (28) rods from 3/32 to 17/32 in diameter
- Rods are 4-7/8 (125mm) long and made of Hardened alloy steel with a black oxide finish
- For easiest and best results, use with our locking soft-grip Pliers for pen disassembly (pkdisgrip)
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 5.45 x 5.95 x 2.95 Inches | Weight: 3.60 pounds
Warranty: 2 years under normal use
See On Amazon #20
PSI Woodworking PK-BS1-MJ Bottle Stopper Woodturning Chuck
Asin: B09C6MHHZV | Model: PK-BS1-MJ | PartNumber: PK-BS1-MJ | Ean: 0840229908615 | UPC: 840229908615
The Chuck Post Is Threaded At 3/8" X 16Tpi (Male).
Drill Bit, Tap Set, And Other Needed Tools And Accessories Are Not Included.
After Securing Your Wood Or Acrylic Blank Onto The Chuck's Post, Mount The Chuck Directly On Your Lathe's Headstock Spindle And Start Turning Your Workpiece.
Chuck Is Pre-Threaded At 1" X 8Tpi (Female).
Features
- Mount your bottle stopper kit material blank on your lathe with this specifically designed chuck; Allows you to turn your project without tailstock support
- Chuck is pre-threaded at 1 x 8tpi (female)
- The chuck post is threaded at 3/8 x 16tpi (male)
- After securing your wood or acrylic blank onto the chuck's post, mount the chuck directly on your lathe's headstock spindle and start turning your workpiece
- Drill bit, tap set, and other needed tools and accessories are not included
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Weight: 0.40 pounds
Warranty: 2 Years Under Normal Use
See On Amazon #21
PSI Woodworking LCSET10 Benjamin's Best 10pc Super Spindle Woodturning Lathe Chisel Set
Asin: B09J1MMQGD | Model: LCSET10 | PartNumber: LCSET10 | Ean: 0840229902804 | UPC: 840229902804
The Following (5) Turning Tools Have M2 Hss Cutting Tips And Measure 16" In Total Length With A 6-1/2" Blade And 9-1/2" Handle; 1" Skew Chisel, 1" Roughing Gouge, 3/16" Parting Tool, 3/4" Spindle Gouge, 5/8" Skew Chisel.
The (2) Carbide Tipped Tools With Replaceable Cutters Are 13-1/2" In Total Length With 3-1/2" Blade And 10" Handle; 3/8" Square 2" Radius Cutter Chisel Intended For Roughing And Shaping; 3/8" Super Skew Intended For Shearing.
The Following (2) Miniature Turning Tools Have M2 Hss Cutting Tips And Measure 10" In Total Length With A 4" Blade And 6" Handle; 1/4" Mini Spindle Gouge And 1/4" Mini Skew Chisel; (1) 1/16" X 1-1/4" M2 Hss 9" Long Tenon Tool Has A 5" Blade.
Lcset10 Includes (10) Turning Tools With Ergonomic Handles, A Wood Storage Case, A Star Key, And A How-To Guide For Using Each Tool; Carbide Cutters On (2) Tools; M2 High Speed Steel Cutting Tips On (8) Tools.
Features
- Versatile set of turning tools for most types of spindle work; Ideal for smoothing, detail cuts, roughing, and parting; Use for making delicate finials to pens to baseball bats
- LCSET10 includes (10) turning tools with ergonomic handles, a wood storage case, a star key, and a how-to guide for using each tool; Carbide cutters on (2) tools; M2 High Speed Steel cutting tips on (8) tools
- The following (5) turning tools have M2 HSS cutting tips and measure 16 in total length with a 6-1/2 blade and 9-1/2 handle; 1 Skew Chisel, 1 Roughing Gouge, 3/16 Parting Tool, 3/4 Spindle Gouge, 5/8 Skew Chisel
- The following (2) miniature turning tools have M2 HSS cutting tips and measure 10 in total length with a 4 blade and 6 handle; 1/4 Mini Spindle Gouge and 1/4 Mini Skew Chisel; (1) 1/16 x 1-1/4 M2 HSS 9 long Tenon Tool has a 5 blade
- The (2) Carbide Tipped tools with replaceable cutters are 13-1/2 in total length with 3-1/2 blade and 10 handle; 3/8 Square 2 Radius Cutter Chisel intended for roughing and shaping; 3/8 Super Skew intended for shearing
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Wodworking
Dimensions: 2.00 x 19.00 x 13.00 Inches | Weight: 7.10 Pounds
Warranty: 2 Years Under Normal Use
See On Amazon #22
PSI Woodworking LX420 Parting Tool 3/4" x 1/8" M2 HSS Woodturning Chisel
Asin: B08F7YBBB6 | Model: LX420 | PartNumber: LX420 | Ean: 0810011935839 | UPC: 810011935839
Blade Is Made From M2 High Speed Steel.
Hardwood Handle With Brass Ferrule.
Total Tool Length Is 16" With A 6" Blade And 10" Handle; Blade Is 3/4" Wide And 3/16" Thick.
Can Also Be Used For Cutting Tenons, Small Flat Areas, And Establishing A Diameter.
Features
- Ideal for cutting off waste, or 'parting', from a woodturning workpiece
- Can also be used for cutting tenons, small flat areas, and establishing a diameter
- Blade is made from M2 High Speed Steel
- Total tool length is 16 with a 6 blade and 10 handle; Blade is 3/4 wide and 3/16 thick
- Hardwood handle with brass ferrule
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Warranty: 2 Years Under Normal Use
See On Amazon #23
PSI Woodworking Products LCENTSET 7-Piece Multi Spur Drive Center Set With A 1-Inch by 8 TPI Mount
Asin: B004JZWK4G | Model: LCENTSET | PartNumber: LCENTSET | Ean: 0718122019601 | UPC: 718122019601
All Centers Have A Spring Loaded Pin For Easy Mounting And Removal Of Your Work-Piece.
Comes In Wooden Case For Storage.
Thread The 1" X 8Tpi Center Carrier Onto Your Lathe's Headstock Spindle For Easy Insertion And Removal Of All The Centers.
Both Center Types Come In 5/8", 1", And 1-1/2".
Features
- Includes (3) 4-prong Spur Centers, (3) Multi-tooth Super Centers, (1) 1" x 8tpi threaded Center Carrier, and (1) set of Tightening Levers
- Both center types come in 5/8, 1, and 1-1/2
- All centers have a spring loaded pin for easy mounting and removal of your work-piece
- Thread the 1 x 8tpi Center Carrier onto your lathe's headstock spindle for easy insertion and removal of all the centers
- Comes in wooden case for storage
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 2.70 x 7.50 x 6.50 Inches | Weight: 3.30 Pounds
Warranty: 2 Years Under Normal Use
See On Amazon #24
PSI Woodworking PKSPSET5 Penturner's 5-Roll Multi Pack Sanding Set
Asin: B07GXHZZDL | Model: PKSPSET5 | PartNumber: PKSPSET5 | Ean: 0689076538893 | UPC: 689076538893
Each Roll Is 1" Wide X 20' Long.
Can Also Be Used For Other Small Turning Projects.
J-Weight Cloth Backed Sandpaper Rolls.
Includes (5) Different Grits: 150X, 240X, 320X, 400X, & 600X.
Features
- Conveniently finish your pens in five graduated sanding steps with this handy Dispenser
- Includes (5) different grits: 150x, 240x, 320x, 400x, & 600x
- Each roll is 1 wide x 20' long
- J-weight cloth backed Sandpaper rolls
- Can also be used for other small turning projects
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 3.70 x 6.95 x 3.70 Inches | Weight: 1.05 pounds
See On Amazon #25
PSI Woodworking PKMBCM2 Turn Between Centers Mandrel System #2MT
Asin: B06Y9265T1 | Model: PKMBCM2 | PartNumber: PKMBCM2 | Ean: 0743031896692 | UPC: 743031896692
Includes A #2Mt Headstock Insert And A Live #2Mt Tailstock Insert.
For #2 Morse Taper Lathes.
Each Insert Has A 7Mm Pin To Mount Bushings.
No Mandrel Shaft To Bend.
Features
- Turn more accurate, consistent, and concentric pen barrels
- No mandrel shaft to bend
- Includes a #2MT headstock insert and a live #2MT tailstock insert
- Each insert has a 7mm pin to mount bushings
- For #2 Morse taper lathes
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 2.20 x 5.20 x 2.20 Inches | Weight: 0.90 pounds
Warranty: 2 years under normal use
See On Amazon #26
PSI Woodworking DC3XX 1.5 HP Portable Dust Collector Motor Blower
Asin: B01CU7DKTI | Model: DC3XX | PartNumber: DC3XX | Ean: 0638370139794 | UPC: 638370139794
Portable Dust Collection Air Handler Motor Blower Unit Weighs Only 46 Pounds; Casters Are Included.
Bag And Hose Are Not Included.
Great For Woodturning Projects, Laser Engraving, Woodworking Machines, 3D Printers, And More.
Unit Comes Pre-Wired For 110 Volt; Single Phase; 18 Amps; Includes Instructions To Convert To 220 Volt.
Features
- 1. 5 Horsepower; Air Flow 850 CFM; Maximum Static Pressure 8. 5"; 9" Steel Impeller; 3450 RPM; 4" Inlet and Outlet
- Unit comes pre-wired for 110 volt; Single phase; 18 amps; Includes instructions to convert to 220 volt
- Portable dust collection air handler motor blower unit weighs only 46 pounds; Casters are included
- Great for woodturning projects, laser engraving, woodworking machines, 3D printers, and more
- Bag and hose are not included
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 17.00 x 18.00 x 15.00 Inches
Warranty: 2 year warranty against manufacturer defects
See On Amazon #27
PSI Woodworking PKM-FSM Keyless Pen Mandrel System #2 Morse Taper
Asin: B07D78BPHQ | Model: PKM-FSM | PartNumber: PKM-FSM | Ean: 0721782102859 | UPC: 721782102859
System Also Includes (5) 7Mm Bushings, (1) Knurled Nut, (1) 7Mm Brad Point Drill Bit, And (2) Tightening Bars To Use If Needed.
Replacement Shafts (Xpkm-Elc2).
Compatible With Psi Woodworking Mandrel Savers (Pkmsts1 & Pkmsts2).
Quickly Slide & Lock The Shaft To Customize For Each Spindle Length.
Features
- Keyless feature allows you to instantly hand loosen & tighten the collet that secures the 7mm mandrel shaft (.244" OD)
- Quickly slide & lock the shaft to customize for each spindle length
- System also includes (5) 7mm bushings, (1) knurled nut, (1) 7mm Brad point drill bit, and (2) tightening bars to use if needed
- Compatible with PSI Woodworking mandrel savers (Pkmsts1 & Pkmsts2)
- Replacement shafts (XPKM-ELC2)
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 2.00 x 8.75 x 2.00 Inches | Weight: 1.24 pounds
Warranty: 2 years under normal use
See On Amazon #28
PSI Woodworking PKTRIMSE Penturning Carbide Insert Barrel Trimming System
Asin: B082XVB5J7 | Model: PKTRIMSE | PartNumber: PKTRIMSE | Ean: 0810011933286 | UPC: 810011933286
Included Components Will Trim (9) Tube Diameters: 7Mm, 8Mm, 3/8", 10Mm, 25/64", 10. 5Mm, 27/64", 12. 5Mm, 31/64".
Smooth And Square Barrels Are Essential For Pen Kit Parts To Mount Properly.
The 4-Sided Replaceable 12Mm Carbide Cutters (Pktrimsx) Will Cleanly Trim Pen Barrels Up To 1" Diameter.
Features
- Includes: Cutter Head, (2) Carbide Cutters, (2) Cutter Screws, 7mm Pilot Shaft, (5) Trimming Sleeves, Allen Wrench, Star Wrench
- The 4-sided replaceable 12mm carbide cutters (PKTRIMSX) will cleanly trim pen barrels up to 1 diameter
- Included components will trim (9) tube diameters: 7mm, 8mm, 3/8, 10mm, 25/64, 10. 5mm, 27/64, 12. 5mm, 31/64
- Smooth and square barrels are essential for pen kit parts to mount properly
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Warranty: 2 Years Under Normal Use
See On Amazon #29
PSI Woodworking R6RINGBU 8pc Ring Turning Bushing Set
Asin: B0C4V9P6DC | Model: R6RINGBU | PartNumber: R6RINGBU | Ean: 0840229917259 | UPC: 840229917259
The Bushings Are Tapered To Allow Finishing Multiple Ring Core Sizes.
Compatible With Ring Core Sizes 3 Through 17.
The Set Includes (4) Steel Bushings And (4) Non-Stick Plastic Bushings So You Can Turn And Finish All Ring Core Sizes With This Single Set.
Features
- Turn and finish your rings on your lathe with a 7mm pen mandrel shaft with this all-inclusive 8-piece ring bushing set
- The set includes (4) steel bushings and (4) non-stick plastic bushings so you can turn and finish all ring core sizes with this single set
- The bushings are tapered to allow finishing multiple ring core sizes
- Compatible with ring core sizes 3 through 17
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Weight: 0.47 pounds
See On Amazon #30
PSI Woodworking LCMINI2 Lathe Woodturning 5pc HSS Mini Chisel Set,one color
Asin: B000KIAE08 | Model: LCMINI2 | PartNumber: LCMINI2 | Ean: 5915903734707, 6292753209784, 0785533943795, 0689076541299, 0756635947196 | UPC: 689076541299, 785533943795, 756635947196
Chisels Are 10-Inch In Overall Length, With 4-Inch Blades.
Comes In An Attractive Wooden Display Box.
Fantastic Buy For Five Essential Chisels.
Includes:-1/4-Inch Roughing Gouge, 1/8-Inch Spindle Gouge,-1/4-Inch Round Nose Scraper, 3/32-Inch Parting Tool,-1/4-Inch Skew Chisel.
Features
- Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules
- Includes:-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel
- Chisels are 10-inch in overall length, with 4-inch blades
- Fantastic buy for five essential chisels
- Comes in an attractive wooden display box
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Dimensions: 7.50 x 11.50 x 1.50 inches | Weight: 1.45 pounds
Warranty: 2 Years Under Normal Use
See On Amazon