PYFORE - Buying Guide
Last Updated: 04/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ESS Dual Engine Sound Simulator System for Axial SCX10/SCX10 II Traxxas TRX4 Axial Wraith (Dual+Engine)
Asin: B09ZNJPPZ7 | Model: 1 | PartNumber: 1
The Sound Output Is Real Time Calculated Based On The Throttle Input And Throttle Movement Speed And Combined With Current Engine Speed To Make A Sound Closest To Real Engine State. It’S Not The Proportional Output Sound Only Based On The Throttle Input..
Ess Dual+ 2017Supports Rc Plus To Realize Functional Setting And Sound Purchasing From Sound Stores.Rcplus Is A Software Brand Under Sense Innovation Andmainly Provide Function Settings To Players. The Sound Store Is Also Integrated Into Rcplus To Servo Players. In The Future The Function Will Be Available On Mobile Device..
Special Sound Can Be Independent Controlled By A Third Channel On Player’S Transmitter. Sound Like Alarm And Horn. Please Check Rcplus Sound Store For Detail List..
The Ess Dual + Sound Simulation System Adopted The Dual Opposed Dual Speakers Design, It Makes The Sound Diffusion Direction Is More Balanced, And The Sound Field Localization Is More Conform To Actual Use, Sound Quality Is Much Better Than Previous One..
Features
- ! ! ! NOTE: For Traxxas UDR models, the connector needs to be replaced due to the different power supply. Or configure a small battery just for power supply! ! ! The ESS sound pack can only withstand a battery voltage of less than 3S. If your battery exceeds 3S, you need to install an external battery of less than 3S. Batteries exceeding 3S will cause overvoltage damage to the sound pack. If you have any questions, please email Amazon. Brand: PYFORE, we have a professional technical team to serv
- The ESS dual + sound simulation system adopted the dual opposed dual speakers design, it makes the sound diffusion direction is more balanced, and the Sound field localization is more conform to actual use, sound quality is much better than previous one.
- The sound output is real time calculated based on the throttle input and throttle movement speed and Combined with current engine speed to make a sound closest to real engine state. It s not the proportional output sound only based on the throttle input.
- Special sound can be independent controlled by a third channel on player s transmitter. Sound like alarm and horn. Please check RCPLUS sound store for detail list.
- ESS DUAL+ 2017supports RC PLUS to realize functional setting and sound purchasing from sound stores.RCPLUS is a software brand under Sense Innovation andmainly provide function settings to players. The sound store is also integrated into RCPLUS to servo players. In the future the function will be available on mobile device.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #2
PYFORE RC Car ESS-ONE Plus Engine Sound System Real Engine Sound Simulator 1:10 1:8 1:5 Truck Rock Crawler
Asin: B09ZLCGDGW
Special Sound Can Be Independent Controlled By A Third Channel On Player’S Transmitter. Sound Like Alarm And Horn. Please Check Rcplus Sound Store For Detail List..
The Sound Output Is Real Time Calculated Based On The Throttle Input And Throttle Movement Speed And Combined With Current Engine Speed To Make A Sound Closest To Real Engine State. It’S Not The Proportional Output Sound Only Based On The Throttle Input..
Features
- The 2017 sound simulation system retains the advantages of the old sound simulation system For optimization, we made some upgrade as below smaller size makes user easy to arrange of wiring redesign of new speaker,optimized circuit design,it has more power, good sensitivity, and longer life time.with the D-Class amplifier chip, it ensures efficient performance and high quality sound output 4 screw holes on the back of shell builded for DIY use.
- The sound output is real time calculated based on the throttle input and throttle movement speed and Combined with current engine speed to make a sound closest to real engine state. It s not the proportional output sound only based on the throttle input.
- Special sound can be independent controlled by a third channel on player s transmitter. Sound like alarm and horn. Please check RCPLUS sound store for detail list.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
See On Amazon #3
PYFORE RC Car 2nd Generation Motor Sound Simulator Set RC Car Engine Sound Simulator, Remote Control Car Sound Engine Simulation Module Set with 2 Speakers for 1/10 Vehicle Model (binaural-)
Asin: B0BZHPV3Y2
Supports Most 2.4G Independent Receivers, Solves Noise Problems, And Is Equipped With Volume Adjustment Buttons..
The Engine Simulation Sound Group Has Different Settings For Different Brands Of Rc Car. Please Contact Us If You Encounter Any Problems. We Will Help You..
The Analog Sound Set Is Only Suitable For Rc Car With Separate Receiver And Esc, Not For Ship Or Toy Model Car. Please Buy Carefully..
The Sound Effect Is Lifelike，A Vast Variety Of Built In Sounds For You To Choose. It Contains Ten Kinds Of Sound, Suitable For Racing Car, Truck, Etc. You Can Switch According To Your Vehicle...
It Can Be Installed In Feitian Gt2, Gt2b, Gt3c, Gt3b, Radiolink Rc3s, Rc3sag, Futaba 1/10 Remote Control Car, The Engine Sound Simulator Is Suitable For 94123 Remote Control Car, Theoretically It Can Guarantee To Meet The Original Equipment..
Features
- Improved the noisy sound of the first generation of idle speed.Increase the volume adjustment Built-in 10 kinds of car sounds, including sports car trucks, etc., suitable for more models.
- It can be installed in Feitian gt2, gt2b, gt3c, gt3b, Radiolink rc3s, rc3sAg, futaba 1/10 remote control car, the engine sound simulator is suitable for 94123 remote control car, theoretically it can guarantee to meet the original equipment.
- Supports most 2.4G independent receivers, solves noise problems, and is equipped with volume adjustment buttons.
- The sound effect is lifelike A vast variety of built in sounds for you to choose. It contains ten kinds of sound, suitable for racing car, truck, etc. You can switch according to your vehicle..
- The engine simulation sound group has different settings for different brands of Rc car. Please contact us if you encounter any problems. We will help you.
- The analog sound set is only suitable for RC car with separate receiver and ESC, not for ship or toy model car. Please buy carefully.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #4
3pcs M0.6 3.175mm 13T 15T 17T 18T 20T 22T 24T 28T 30T 33T Aluminum Alloy Metal Pinion Motor Gear for 1/10 Rc Model (25T-27T-29T)
Asin: B09Z1VYNC3 | Model: 1 | PartNumber: 1 | Ean: 6981651648985
Gear Surface Anti-Corrosion Treatment.
Each Gear Is Equipped With A Machine Screw, Transparent Tape Packaging.
Suitable For Rc Car Models 1/8 Brushless Motor With 5Mm Shaft.
Hard Anodized Gear Surface.
Features
- Easy installation and long service life
- Hard anodized gear surface
- Gear surface anti-corrosion treatment
- Suitable for RC car models 1/8 brushless motor with 5mm shaft
- Each gear is equipped with a machine screw, transparent tape packaging
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
See On Amazon #5
PYFORE 3650 brushless Motor 3300KV 4 Extremely high Torque Motor for RC Boat and 1/8 1/10 1/12 Remote Control Car Marine Ship 3650-3300KV
Asin: B0B1D3K8TP
Features
- Scope of application: suitable for 1:10 short truck, off-road, upgraded version of big bike
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #6
PYFORE RC Cars Tool Heightening Work Stand Assembly Platform 360 Degree Rotate Repair Station 1/10 1/8 Buggy Crawler Car (Green)
Asin: B09Z7RQ3V2 | Ean: 0752811179559 | UPC: 752811179559
Repair Station Is More Stable,New Upgraded Version.The Repair Workstation Equipped With A Magnetic Strip,Won't Worry The Metal Parts Rolling Everywhere.Molded Non-Slip Foam Inserts In The Upper Plate Grip Chassis Securely..
Our Guarantee: We Take Full Responsibilities To Our Items, If You Have Any Question, Please Feel Free To Email Us, We Will Give You A Satisified Solution:Provide Free Replacement Or Even Full Refund To You ..
Can Measure The Length Of The Parts.Pack Of 1 Stand,Packed In Box,And It Is Easy To Assemble ..
360-Degree Rotation, Adjustable Height From 4.41" (112Mm) To 6.61" (168Mm).The Repair Workstation Support Can Be Locked Down By Two Grub Screws,Offer A Good Bite Sturdy..
Features
- Fit 1/8 1/10 1/12 1/16 1/18 Arrma Redcat TRX4 Axial Losi RC Crawler Monster Truck Buggy,Such as Traxxas Slash 4x4 / 2WD / Trx-4 / E-Revo / Revo 3.3 / Redcat Volcano Epx /Gen7 / Axial SCX10 / RC4WD D90,etc.
- 360-degree Rotation, Adjustable Height from 4.41 (112mm) to 6.61 (168mm).The Repair Workstation Support can be locked down by two Grub Screws,offer a good bite Sturdy.
- Repair station is more stable,new upgraded version.The Repair Workstation Equipped with a magnetic strip,won't worry the metal parts rolling everywhere.Molded Non-slip foam inserts in the upper plate grip chassis securely.
- can measure the length of the parts.Pack of 1 Stand,Packed in Box,and it is easy to assemble .
- Our Guarantee: We take full responsibilities to our items, if you have any question, please feel free to email us, we will give you a satisified solution:provide free replacement or even full refund to you .
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #7
GPM for TRAXXAS 1/8 4WD Sledge Aluminum Alloy Thick Front Shock Absorber (midpoint 128mm) Spring Type
Asin: B0B74YY36D
The Shock Needle Is Thickened From The Original 5Mm To 6.0Mm, Which Is Stronger And Will Not Bend And Deform.
Special Model For: Traxxas 1/8 4Wd Sledge Monster Truck-95076-4 (Special).
The Whole Body Aluminum Alloy Shock Absorber Cylinder And Round Shock Absorber Cover Design, More Sturdy, Good Sealing Effect, Not Easy To Leak Oil.
Aluminum Alloy Material, Durable, Spring Wire Diameter Of 2.0Mm Is The Same As The Original.
Features
- Original No.: 9660
- Aluminum alloy material, durable, spring wire diameter of 2.0mm is the same as the original
- The shock needle is thickened from the original 5mm to 6.0mm, which is stronger and will not bend and deform
- The whole body aluminum alloy shock absorber cylinder and round shock absorber cover design, more sturdy, good sealing effect, not easy to leak oil
- Special model for: TRAXXAS 1/8 4WD SLEDGE MONSTER TRUCK-95076-4 (Special)
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #8
3pce 17mm Wheel Hex Wrench 4/5/5.5/7mm Small Sleeve Hex Socket Wheel Spanner Tool for 1/8 1/10 RC Car Truck Crawler Truggy Buggy Tires Tyre
Asin: B0B9MKBPH9
Hex Size: 17Mm(The Bigger One) & 4Mm, 5Mm, 5. 5Mm, 7Mm (The Cross Wrenches Small Sleeve).
Small Size,Can Be A Pocket Tool And Take It To Anywhere..
Package Include: 3 Pieces (As Shown In The Picture).
Made Of Quality Hard Aluminum Alloy, Resistant To Stripping & Breaking, Rust-Free And Durable.
Features
- Compatible with: Assembly & Disassembly of 17mm Hex Wheel Hubs, Compatible with mostly brands 1:8th Models,for Traxxas, Arrma, Redcat, Losi,Team Associated,HPI, Kyosho, HSP, etc.
- Made of Quality Hard Aluminum Alloy, resistant to stripping & breaking, rust-free and durable
- Hex Size: 17mm(The bigger one) & 4mm, 5mm, 5. 5mm, 7mm (The Cross Wrenches Small Sleeve)
- Package include: 3 Pieces (As shown in the picture)
- Small size,can be a pocket tool and take it to anywhere.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #9
GPM for TRAXXAS-1/5 X-MAXX 6S Monster TRUCK-77076-4, TRAXXAS-1/5 X-MAXX 8S Monster TRUCK-77086-4 Aluminum Alloy Shock Absorber Cover (Full Set)
Asin: B0BPHLF1PM
The Shock Absorber Cover Retains The Original Vent Hole, Which Can Discharge Excess Oil And Air During Installation..
Applicable Models For: Traxxas-1/5 X-Maxx 6S Monster Truck-77076-4.
General Model For: Traxxas-1/5 X-Maxx 8S Monster Truck-77086-4.
This Shock Absorber Is Suitable For Shock Absorbers And Original Shock Absorbers From Gpm.
Made Of High-Quality Aluminum Alloy Material, It Has Better Durability And Accurate Data. The Oil Pressure Cap Is Matched With The Oil Pressure Cap, And The Sealing Effect Is Better, So As To Tightly Seal The Shock Absorber..
Features
- Original number: 7764
- Made of high-quality aluminum alloy material, it has better durability and accurate data. The oil pressure cap is matched with the oil pressure cap, and the sealing effect is better, so as to tightly seal the shock absorber.
- The shock absorber cover retains the original vent hole, which can discharge excess oil and air during installation.
- This shock absorber is suitable for shock absorbers and original shock absorbers from GPM
- Applicable models for: TRAXXAS-1/5 X-MAXX 6S MONSTER TRUCK-77076-4
- General model for: TRAXXAS-1/5 X-MAXX 8S MONSTER TRUCK-77086-4
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #10
PYFORE 1/7 Compatible with Mojave Dedicated Tires 17MM Adapter RC Model Cars Wheels Skin Upgrade Off-Road Grip Short-Course Truck Car (LT18046)
Asin: B09Z6S2VRB | Ean: 0752811179511 | UPC: 752811179511
Please Make Sure Our 1/10 Rc Tires And Wheels Are The Correct Size You Are Looking For To Avoid Returns Due To Size Inconsistencies And Save You Time..
Its Non-Slip Surface Provides Strong Grip And Durability For A Smooth And Agile Ride. Greater Grip Due To Specially Designed Surface Texture, Suitable For Pavement, Hay, Hard Dirt, Loose Surfaces, Etc..
Before Using, Please Glue And Fix The Wheel Hub And Tire Skin To Avoid Separation Of The Wheel Hub And The Tire When Driving At High Speed..
Made Of High-Quality Rubber And Plastic Materials, It Is More Durable And Sturdy, Practical And Environmentally Friendly, Not Easy To Wear, And Has A Long Service Life..
Compatible: This 1/10 Scale Rc Wheel And Tire Is Compatible With Traxxas 2Wd/4Wd Axial Redcat Rc4wd Rc Monster Truck Buggy, Etc. 1/10 Universal Truck Tires..
Features
- This tire is unbonded. Need to glue it yourself! ! !
- Compatible: This 1/10 scale RC wheel and tire is compatible with Traxxas 2WD/4WD Axial Redcat Rc4wd RC Monster Truck Buggy, etc. 1/10 Universal Truck Tires.
- Please make sure our 1/10 RC tires and wheels are the correct size you are looking for to avoid returns due to size inconsistencies and save you time.
- Made of high-quality rubber and plastic materials, it is more durable and sturdy, practical and environmentally friendly, not easy to wear, and has a long service life.
- Its non-slip surface provides strong grip and durability for a smooth and agile ride. Greater grip due to specially designed surface texture, suitable for pavement, hay, hard dirt, loose surfaces, etc.
- Before using, please glue and fix the wheel hub and tire skin to avoid separation of the wheel hub and the tire when driving at high speed.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
See On Amazon #11
1/10 RC Remote Control Model car Short Card Flat Ground RV wear-Resistant Racing Tires Modified and Upgraded Compatible with ARRMA DHK Slash Thunder Magic D
Asin: B0B3XDCT8S | Model: racing tires modified and upgraded | PartNumber: racing tires modified and upgraded
Inner Diameter: 74Mm.
Single Weight: 133G, Adapter: 12Mm.
Wheel Outer Diameter: 59Mm.
Width: 44Mm.
Features
- Outer diameter: 112mm
- Width: 44mm
- Inner diameter: 74mm
- Wheel outer diameter: 59mm
- Single Weight: 133g, Adapter: 12mm
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #12
4pce 1/10 Climbing car RC car 1.9 inch Bead Lock Wheel wear-Resistant Rubber tire Universal cr tire for TRAXXAS TRX4 SCX10 EX86100 EX86190 AXIA RGT
Asin: B0B9XQ4RMN
1.9 Inch Bead Lock Wheels - Free From Tire Sticking Troubles.
Converted To Climbing Bike Design, Super Soft Tire Skin, High Resilience Liner, Enhanced Grip.
Special Anti-Skid Tread Pattern Enhances Tire Grip, Thickened Sponge Liner Provides Sufficient Support For Tires.
Combined Into A Set Of Ready-To-Use Climbing Bike Tires.
Features
- Wear-resistant rubber tire skin + high elastic sponge liner + reinforced aluminum alloy wheels
- Combined into a set of ready-to-use climbing bike tires
- 1.9 inch bead lock wheels - free from tire sticking troubles
- Special anti-skid tread pattern enhances tire grip, thickened sponge liner provides sufficient support for tires
- Converted to climbing bike design, super soft tire skin, high resilience liner, enhanced grip
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 47.24 x 47.24 x 17.71 Inches | Weight: 1.72 pounds
See On Amazon #13
ZD Racing DBX-10 Desert Buggy Off-Road Vehicle Refit Parts Longitudinal Drive Shaft CVD 7210 for 1/10 RC Model Car Accessories
Asin: B0B1BQLVT4
Model Number : 7210.
Four-Wheel Drive Attributes : Assemblage.
For Vehicle Type : Cars.
Use : Vehicles & Remote Control Toys.
Features
- Upgrade Parts/Accessories : CVD
- Use : Vehicles & Remote Control Toys
- Model Number : 7210
- For Vehicle Type : Cars
- Four-wheel Drive Attributes : Assemblage
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
See On Amazon #14
4PCS Rubber Sand Tires Wheels12mm/14mm/17mm Hex RC Wheels and Tires for 1/10 Scale Arrma Senton Tires Traxxas Slash Tires Axial Redcat Rc4wd Hex Detachable Replacement Snow Tires Desert Tires
Asin: B0B7NH8HRY
Wheel Frame Inner Diameter: 74Mm.
Hex Adapter: 12Mm/14Mm/17Mm Can Be Replaced By Yourself!.
Width: 45.5Mm.
Features
- Diameter: 117mm
- Width: 45.5mm
- Wheel frame inner diameter: 74mm
- Hex Adapter: 12mm/14mm/17mm can be replaced by yourself!
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #15
4PCS Metal Wheel Hub Rubber Tires for AXIAL SCX24 AXI00006 AXI90081 AXI00002 AXI00001 1/24 Mini RC Model Car Crawler (silver2)
Asin: B0B7RT6828
Hard Tire: Inner Diameter: 25Cm Diameter: 48Cm Thickness: 18Cm..
The 2 Models Are Hard Tires, The Tire Skin And Inner Sponge Are Relatively Hard, Which Is More Suitable For Running On The Road..
Type 1 Is A Soft Tire, With Soft Tire Skin And Inner Sponge, Which Is More Suitable For Climbing..
Soft Tire: Inner Diameter: 24Cm Diameter: 53Cm Thickness: 19Cm..
Features
- Climbing tires. 1 is a soft tire. 2 are hard tires. Tires need to be assembled by themselves. Wheels and tires are separate. Please purchase according to your own needs
- Soft tire: Inner diameter: 24cm Diameter: 53cm Thickness: 19cm.
- Hard tire: inner diameter: 25cm diameter: 48cm thickness: 18cm.
- Type 1 is a soft tire, with soft tire skin and inner sponge, which is more suitable for climbing.
- The 2 models are hard tires, the tire skin and inner sponge are relatively hard, which is more suitable for running on the road.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 0.70 x 1.85 x 1.85 inches
See On Amazon #16
PYFORE 1/7 Mojave Desert Short Course Truck Tires Wheel Compatible with TRAXXAS UDR Off-Road Buggy Tire 17MM Adapter Wearable FS 336184 RC Model Car (red)
Asin: B09Z7MYKYZ | Ean: 0752811179535 | UPC: 752811179535
Made Of High-Quality Rubber And Plastic Materials, It Is More Durable And Sturdy, Practical And Environmentally Friendly, Not Easy To Wear, And Has A Long Service Life..
Before Using, Please Glue And Fix The Wheel Hub And Tire Skin To Avoid Separation Of The Wheel Hub And The Tire When Driving At High Speed..
This Tires For Traxxas Udr Requires Additional Installation Of Spacers.
Its Non-Slip Surface Provides Strong Grip And Durability For A Smooth And Agile Ride. Greater Grip Due To Specially Designed Surface Texture, Suitable For Pavement, Hay, Hard Dirt, Loose Surfaces, Etc..
Please Make Sure Our 1/7 1/8 Rc Tires And Wheels Are The Correct Size You Are Looking For To Avoid Returns Due To Size Inconsistencies And Save You Time..
Features
- Compatible: This 1/7 1/8 scale RC wheel and tire
- Please make sure our 1/7 1/8 RC tires and wheels are the correct size you are looking for to avoid returns due to size inconsistencies and save you time.
- Made of high-quality rubber and plastic materials, it is more durable and sturdy, practical and environmentally friendly, not easy to wear, and has a long service life.
- Its non-slip surface provides strong grip and durability for a smooth and agile ride. Greater grip due to specially designed surface texture, suitable for pavement, hay, hard dirt, loose surfaces, etc.
- Before using, please glue and fix the wheel hub and tire skin to avoid separation of the wheel hub and the tire when driving at high speed.
- This Tires For TRAXXAS UDR Requires Additional Installation Of Spacers
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #17
GPM for TRAXXAS 1/8 4WD Sledge Sled Aluminum Alloy Shock Cover/Applicable to Original Suspension-1 Set of 4 Pieces
Asin: B0B747TLZ2
Made Of High-Quality Aluminum Alloy Material, Which Has Better Durability And Accurate Data. The Oil Pressure Cap Is Matched With The Oil Pressure Cap, And The Sealing Effect Is Better, So As To Tightly Seal The Shock Absorber..
Special Model For: Traxxas 1/8 4Wd Sledge Monster Truck-95076-4 (Special).
This Shock Cover Is Suitable For Gpm Shocks And Original Shocks.
Original No.: 9664.
Features
- Item Number: SLEDP/CAP
- Original No.: 9664
- Made of high-quality aluminum alloy material, which has better durability and accurate data. The oil pressure cap is matched with the oil pressure cap, and the sealing effect is better, so as to tightly seal the shock absorber.
- This shock cover is suitable for GPM shocks and original shocks
- Special model for: TRAXXAS 1/8 4WD SLEDGE MONSTER TRUCK-95076-4 (Special)
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #18
GPM for ARRMA-1/10 4WD SENTON 4X4 V3 3S BLX BRUSHLESS Short Couse TRUCK-ARA4303V3 Stainless Steel 1/10 Chassis Armor Armor Crash Protection
Asin: B0BBCF6QM1
3.Hand-Polished Finishing Of Each Piece Done By The Team..
5.This Is The Optional Hot Racing Stainless Steel Center Armor Skid Plate Is The Ultimate Protection From Any Rock Strikes..
4. Stainless Steel: Front And Rear 2.0Mm. Middle Panels: 0.8Mm Installation: Remove The Screws At The Original Postioning Holes, Use Shims To Fit The Protection Plates. Install With The Extended Length Stainless Steel Screws Provided..
2. Detailed Workmanship With Many Quality Checks Along Each Procedure. Metallic Surface Gives Strong Visual Effect..
Features
- 1. Made with stainless steel to offer good protection for front, center and rear chassis, prevent rustiness.
- 2. Detailed workmanship with many quality checks along each procedure. Metallic surface gives strong visual effect.
- 3.Hand-polished finishing of each piece done by the team.
- 4. Stainless steel: Front and Rear 2.0mm. middle panels: 0.8mm Installation: Remove the screws at the original postioning holes, use shims to fit the protection plates. Install with the extended length stainless steel screws provided.
- 5.This is the optional Hot Racing stainless Steel Center armor skid plate is the ultimate protection from any rock strikes.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #19
GPM for LOSI-1/4 PROMOTO-MX Motorcycle RTR, FXR-LOS06000 Aluminum Alloy 7075 Skid Plate
Asin: B0CGX1ZCDZ
Applicable Models For: Losi-1/4 Promoto-Mx Motorcycle Rtr, Fxr-Los06000 (Special).
Universal Models For: Losi-1/4 Promoto-Mx Motorcycle Rtr, Fxr-Los06002.
Upgraded To Aluminum Alloy 7075 Material, Which Has Super Protective Function And Is Sturdy And Durable.
Features
- Original factory number: LOS264001
- Upgraded to aluminum alloy 7075 material, which has super protective function and is sturdy and durable
- Applicable models for: LOSI-1/4 PROMOTO-MX MOTORCYCLE RTR, FXR-LOS06000 (special)
- Universal models for: LOSI-1/4 PROMOTO-MX MOTORCYCLE RTR, FXR-LOS06002
- See more on Amazon...
Brand: PYFORE | Manufacturer: GPM
See On Amazon #20
GPM for ARRMA 1/18 4WD Granite GROM 380 Brushed 4X4 Monster TRUCK-ARA2102 Metal CVD Front Drive Shaft and Aluminum Alloy 7075 Adapter
Asin: B0CQ1YPPBC
Applicable Models Gpm For : Arrma-1/18 4Wd Granite Grom Mega 380 Brushed 4X4 Monster Truck-Ara2102 (Exclusive).
Heavy-Duty Cnc Machined Steel Wheel Stub Axles, Replacing Original Cvd Dog Bones And Plastic Axles.
Features
- Made of medium carbon alloy steel, hardened and blackened, stronger and wear-resistant
- Heavy-duty CNC machined steel wheel stub axles, replacing original CVD dog bones and plastic axles
- Applicable models GPM For : ARRMA-1/18 4WD GRANITE GROM MEGA 380 BRUSHED 4X4 MONSTER TRUCK-ARA2102 (exclusive)
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #21
PYFORE RC Motor Heatsink with 21000RPM Cooling Fan, 42mm Motor Radiator with RGB Light Brushless Engine Motor Heat Sink for TRAXXAS 1/8 1/10 Car Truck Buggy SCX10, Tamiya ARRMA Axial 4274 4268 Motor
Asin: B0B3XMCD1L | Model: ESC with light cooling high-speed fan | PartNumber: ESC with light cooling high-speed fan
42Mm Diameter Rc Motor Heatsink For 1/8 Scale, 1/10Scale Rc Car And Fit 3010/4010 Size Brushless / Brushed Electric Motor Engine, Compatible With Most, Redcat Racing, Hpi, Tamiya Models With 3010/1040 Size Electric Motors..
Rc Motor Heat Sink With Small Size And Lightweight That Very Convenient For You To Install And Remove..
This Motor Heat-Sink Radiator With 5---8.4V Power Cooling Fan Which Keep Your Motor Cool And Make Your Motor Run More Efficiently And The Heatsink (Made Of Aluminum) Has A Good Conductivity, Please Confirm The Model Before Purchasing..
Especially Design Heatsink And Cooling Fan Can Power Supply Over Receiver, Convenience And Easy To Use. Moreover,That Heat Sink Having Rgb Led Light That Unique Design..
Features
- This Heatsink are made of high-quality aluminum alloy and plastic material, wear resistant, durable and long service life. High performance and fine workmen.
- Especially design heatsink and Cooling fan can power supply over receiver, convenience and easy to use. Moreover,that heat sink having RGB led light that unique design.
- 42mm Diameter RC Motor Heatsink for 1/8 scale, 1/10scale RC Car and fit 3010/4010 Size Brushless / Brushed Electric Motor Engine, Compatible with Most, Redcat Racing, HPI, Tamiya Models with 3010/1040 size Electric Motors.
- This Motor Heat-sink Radiator with 5---8.4v power Cooling fan which keep your motor cool and make your motor run more efficiently and The heatsink (made of aluminum) has a good conductivity, please confirm the model before purchasing.
- RC Motor Heat sink with Small size and lightweight that very convenient for you to install and remove.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #22
GPM for TRAXXAS 1/6 4WD XRT 8S-78086-4 High Carbon Steel Front/Rear Universal CVD Head
Asin: B0BS96KJVY
Applicable Models For: Traxxas 1/6 4Wd Xrt 8S-78086-4 (Dedicated).
General Model For: Traxxas-1/5 X-Maxx 8S Monster Truck-77086-4.
Upgrade The Original Cvd Head Aluminum Material To High Carbon Steel Material, Which Is Stronger And Wear-Resistant.
Features
- Original number: 7768
- Upgrade the original CVD head aluminum material to high carbon steel material, which is stronger and wear-resistant
- Applicable models for: TRAXXAS 1/6 4WD XRT 8S-78086-4 (dedicated)
- General model for: TRAXXAS-1/5 X-MAXX 8S MONSTER TRUCK-77086-4
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #23
GPM for ARRMA aluminum alloy double-stage spring, thick spring and shock needle front shock (midpoint 115MM)
Asin: B0B6VQFVJ9
The Shock Shaft Is Made 5Mm Thick And Smoothly Polished To Achieve Higher Durability..
Two-Section Spring Design Avoids Bending Due To Long-Term Compression..
Silicone Oil Is Filled With Smooth Travel..
Made With A Quality Light Weight High Tensile Strength Aluminum 6061 T6 For Greater Durability. The Spring Coil Has Increased From Original 1.6Mm To 1.7Mm For More Powerful Use..
Features
- Applicable models for: ARRMA KRATON & OUTCAST for front, SENTON & TYPHON for rear
- Made with a quality light weight high tensile strength aluminum 6061 T6 for greater durability. The spring coil has increased from original 1.6mm to 1.7mm for more powerful use.
- The shock shaft is made 5mm thick and smoothly polished to achieve higher durability.
- Silicone oil is filled with smooth travel.
- Two-section spring design avoids bending due to long-term compression.
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #24
GPM for TRAXXAS UDR Stainless Steel Front Steering Positive and Negative Teeth Adjustable Buckle Wave Foot Tie Rod UDR162SA
Asin: B0C3QPB863
2. Positive And Negative Teeth Adjustable Pull Rod.
3. The Design Of Buckle Wave Foot, Better Angle, Reduce The Force Of Wave Foot, More Durable.
1. Stainless Steel Material, Stronger, Corrosion-Resistant And Wear-Resistant.
Features
- Item No.: UDR162SA
- 1. Stainless steel material, stronger, corrosion-resistant and wear-resistant
- 2. Positive and negative teeth adjustable pull rod
- 3. The design of buckle wave foot, better angle, reduce the force of wave foot, more durable
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #25
GPM for LOSI-1/4 PROMOTO-MX Motorcycle RTR, FXR-LOS06000 Aluminum Alloy 7075 Shock Absorber + Wave Foot kit
Asin: B0CHM47XRT
Applicable Models For: Losi-1/4 Promoto-Mx Motorcycle Rtr, Fxr-Los06000 (Special).
Universal Models For: Losi-1/4 Promoto-Mx Motorcycle Rtr, Fxr-Los06002.
Upgraded To Aluminum Alloy 7075 Material, Which Is Stronger And More Wear-Resistant.
Features
- Original factory number: LOS263008
- Upgraded to aluminum alloy 7075 material, which is stronger and more wear-resistant
- Applicable models for: LOSI-1/4 PROMOTO-MX MOTORCYCLE RTR, FXR-LOS06000 (special)
- Universal models for: LOSI-1/4 PROMOTO-MX MOTORCYCLE RTR, FXR-LOS06002
- See more on Amazon...
Brand: PYFORE | Manufacturer: GPM
See On Amazon #26
GPM for LOSI 1/10 LASERNUT Tenacity Ultra 4 Rock TACER-LOS0302845#Hardened Steel Middle Drive Dog Bone
Asin: B0BGRXVQGT
Short One 126Mm Midpoint 132.7Mm Total Length.
2. Thicker Design Upgraded From Original Dogbone 4Mm Diameter To 5Mm Diameter Makes The Movement Of Turn More Powerful And Not Easy To Break..
Applicable Models For: Losi 1/10 Lasernut Tenacity Ultra 4 Rock Tacer-Los03028 (Dedicated).
1. Made By Harden Steel #45 For Stronger Use And Smooth Driving Performance..
Long One 135Mm Midpoint 140.8Mm Total Length.
Features
- Original No.: LOS232054
- Long one 135MM midpoint 140.8MM total length
- Short one 126MM midpoint 132.7MM total length
- 1. Made by harden steel #45 for stronger use and smooth driving performance.
- 2. Thicker design upgraded from original dogbone 4mm diameter to 5mm diameter makes the movement of turn more powerful and not easy to break.
- Applicable models for: LOSI 1/10 LASERNUT TENACITY ULTRA 4 ROCK TACER-LOS03028 (dedicated)
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #27
ZD Racing 1/8 MT8 Parts Truck Monster Buggy Base C Fixed Mount 8037 for Model RC Cars Accessories
Asin: B0B18L6FV8
Rc Parts & Accs : Base C.
Four-Wheel Drive Attributes : Assemblage.
Model Number : 8037.
Upgrade Parts/Accessories : Base C.
Features
- Material : Composite Material
- Upgrade Parts/Accessories : Base C
- RC Parts & Accs : Base C
- Model Number : 8037
- Four-wheel Drive Attributes : Assemblage
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
See On Amazon #28
GPM for TRAXXAS-1/5 X-MAXX 6S Monster TRUCK-77076-4 TRAXXAS-1/5 X-MAXX 8S Monster TRUCK-77086-4 Medium Carbon Steel Motor Gear 12T with 35T Main Gear
Asin: B0BHZ27226
(2) Motor Tooth Aperture: 5Mm, D Type, Module: 1.5Mm, Number Of Teeth: 12T, Tooth Surface Width: 9Mm, Main Tooth Outer Diameter: 55.5Mm.
Applicable Models For: Traxxas-1/5 X-Maxx 6S Monster Truck-77076-4 (Dedicated).
General Models For: Traxxas-1/5 X-Maxx 8S Monster Truck-77086-4.
(3) The Original Motor Base Recommends 12T With 35T.
(1) Medium Carbon Steel Material, Stronger Than The Original Gear, Wear-Resistant And Better Transmission.
Features
- Original No.: 6447X, 6448X, 6449X
- (1) Medium carbon steel material, stronger than the original gear, wear-resistant and better transmission
- (2) Motor tooth aperture: 5mm, D type, module: 1.5mm, number of teeth: 12T, tooth surface width: 9mm, main tooth outer diameter: 55.5mm
- (3) The original motor base recommends 12T with 35T
- Applicable models for: TRAXXAS-1/5 X-MAXX 6S MONSTER TRUCK-77076-4 (dedicated)
- General models for: TRAXXAS-1/5 X-MAXX 8S MONSTER TRUCK-77086-4
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #29
GPM for ARRMA 1/7 Infraction 6S BLX -ARA109001 Carbon Fiber Left and Right Outboard Fenders (56MM Wide)
Asin: B0BBRKG2VJ
2. Widened Design, Dustproof Function.
Applicable Models For: Arrma 1/7 Infraction 6S Blx -Ara109001 (Special Purpose).
1.Replace The Original Chassis Side Panels, Carbon Fiber Is Stronger And Lighter.
Features
- Original No.: ARA320509
- 1.Replace the original chassis side panels, carbon fiber is stronger and lighter
- 2. Widened design, dustproof function
- Applicable models for: ARRMA 1/7 INFRACTION 6S BLX -ARA109001 (special purpose)
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #30
Ruitai RGT 86100 1/10 Remote Control Climbing car Original Original Accessories Metal Dog Bone Cup R86041
Asin: B0B4RQZR4Z
Features
- Ruitai RGT 86100 1/10 remote control climbing car original original accessories metal dog bone cup R86041
- See more on Amazon...
Brand: PYFORE | Manufacturer: PYFORE
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon