Pissente - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from Pissente on Amazon
- Valve Spreader Bars, 8pcs Chrome 4 3/4in Valve Cover Spreader Bars, Hold Down Clamp Bolts Screws Val...
- Pissente Thumb Throttle, 130X Thumb Throttle Speed Control Accessories Waterproof Connector Finger T...
- Air Filter Inlet Tube, Motorcycle Air Intake Pipe Inlet Hose 150mm Flexible Cold Air Intake Turbo Re...
- Motor Brushes Set, ATV Motor Carbon Brush Kit Strong Power Output Increase Speed Brushes Set for 200...
- 2Pcs Chassis Coolant Pipe Guard Car Chassis For Tesla Model 3 Chassis Condenser Tube Protection Cover
- Carburetor Pilot Jets, Carburetor Main Intermediate Jet Kit 35 0995 Copper Carb Main Jet Slow Pilot ...
- Pull Start Assembly, Recoil Starter Assembly Metal Alloy Pa6 Gf30 1716502S Replacement Recoil Pull S...
- Tilt End Cap, Aluminum Alloy Rubber Trim Cylinder End Cap 6H1 43821 11 00 Tilt End Cap Replacement F...
- Trailer Brakes Breakaway Kit with Switch, 12V LED Test Break Away System Emergency Brake Switch Acce...
- Car Pcv Valve Kit, Aluminum Engine PCV Valve N54 Twin Turbo E88 2008-10 Twin Turbo E92 2007-08 Twin ...
#1
Valve Spreader Bars, 8pcs Chrome 4 3/4in Valve Cover Spreader Bars, Hold Down Clamp Bolts Screws Valve Cover, Replacement Valve Cover Load Spreader Fit for Chevy 283 305 327 350
Asin: B0BYP1TTJZ | Model: Pissentex10t9wn64r | PartNumber: Pissentex10t9wn64r
Stable Characteristics: Chrome 4 3/4In Valve Cover Hold Down Spreader Bars, With Stable Characteristics And Professional Performance. Professional Manufacturing, Exquisite Workmanship, And Has Long Service Life..
Greatly Help To Distribute The Load On The Bonnet Bolts, To Seal The Bonnet Gaskets Better..
Note: 4 3/4In Valve Cover Is Suitable For All Engines Using 1/4-20 Thread Bolts, Not Fitting For Pontiac And Fitting For Ford Fe Engines Using 5/16-18 Thread. Please Notice The Fitment Before Purchase..
Features
- FITMENT: This replacement engine valves part is specially designed to fit for Chevy 283 305 327 350 383 400 engine with small block, can keep the engine work well.
- NOTE: 4 3/4in valve cover is suitable for all engines using 1/4-20 thread bolts, not fitting for pontiac and fitting for ford FE engines using 5/16-18 thread. Please notice the fitment before purchase.
- STABLE CHARACTERISTICS: Chrome 4 3/4in valve cover hold down spreader bars, with stable characteristics and professional performance. Professional manufacturing, exquisite workmanship, and has long service life.
- Greatly help to distribute the load on the bonnet bolts, to seal the bonnet gaskets better.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #2
Pissente Thumb Throttle, 130X Thumb Throttle Speed Control Accessories Waterproof Connector Finger Throttle Accelerator Speed Control for Electric Scooters E Bike
Asin: B0C7VKQ39V | Model: Pissente8fq7ahmxbr | PartNumber: Pissente8fq7ahmxbr
【Durable Material】This E-Bike Throttle Speed Control Device Is Made Of High Quality Plastic As Well As Plastic Material, Which Is Robust And Durable, Has Good Hardness As Well As Flexibility And Is Not Easy To Break, Ensuring That You Can Use It For A Long Time,Electric Bicycle Thumb Throttle.
【Easy To Install】This E-Bike Speed Control Can Be Mounted On Either Side Of The Handlebar And Is Very Flexible As It Can Be Used Left Or Right. Simply Connect The Handlebars To The Interface Where You Want To Install It And You Are Ready To Go,Ebike Throttle.
Universal Thumb Throttle : This Is The Universal Thumb Throttle, Suitable For Electric Bicycle, Electric Scooter Modification, Not Suitable For Bafang Brand Models,Electric Bicycle Waterproof Connector.
Easy To Install : Easy To Install On The Handlebars Of Electric Vehicles. The 130X Thumb Throttle Thumb Simplifies Installation Without Modification, Cutting, Or Drilling. It Can Be Used After Installation,Finger Throttle Accelerator.
Features
- Waterproof Connector This e-bike thumb throttle with waterproof connector is compact and lightweight; it allows you to use it in a variety of ways, rain or shine, with a long wire for easy connection,Right / Left Thumb Throttle
- Easy to Install : Easy to install on the handlebars of electric vehicles. The 130X Thumb Throttle thumb simplifies installation without modification, cutting, or drilling. It can be used after installation,Finger Throttle Accelerator
- Durable Material This e-bike throttle speed control device is made of high quality plastic as well as plastic material, which is robust and durable, has good hardness as well as flexibility and is not easy to break, ensuring that you can use it for a long time,Electric Bicycle Thumb Throttle
- Universal Thumb Throttle : This is the universal thumb throttle, suitable for electric bicycle, electric scooter modification, Not suitable for Bafang brand models,Electric Bicycle Waterproof Connector
- Easy to Install This e-bike speed control can be mounted on either side of the handlebar and is very flexible as it can be used left or right. Simply connect the handlebars to the interface where you want to install it and you are ready to go,ebike throttle
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #3
Air Filter Inlet Tube, Motorcycle Air Intake Pipe Inlet Hose 150mm Flexible Cold Air Intake Turbo Replacement for 70cc 90cc 110cc 125cc ATV QUAD PIT PRO DIRT BIKE
Asin: B0C72W97DT | Model: Pissented075eyiztq | PartNumber: Pissented075eyiztq
Better Air Filtering Function: This Air Filter Inlet Hose Is Proficient In Delivering Superior Air Filtering Function. This Ensures That Your Engine Gets A Clean, Dust-Free Air Supply For Combustion, Enhancing Its Performance And Lifespan. Enjoy Peace Of Mind With This Superior-Quality Air Filter Intake Hose In Your Engine System..
Robust And Durable Construction: Made From Superior-Grade Rubber Materials, This Air Filter Intake Pipe Boasts Excellent Compressibility, Toughness, And Durability. It Is Engineered To Withstand Tough Conditions And Deliver A Long Service Life, Providing Unparalleled Value For Money And Reliability..
Practical And Versatile: The Air Filter Inlet Tube Is Highly Versatile And Can Be Used Extensively For Modification, Replacement, Repair, And Refurbishment Of The Original Car Parts. Its Flexible And Adaptable Design Caters To A Plethora Of Air Intake Needs Across Various Vehicle Models..
Precise Dimensions: The Air Filter Intake Tube Flaunts A Total Length Of Approximately 150Mm/5.9In And An Inner Diameter Of Around 43Mm/1.7In. These Precise Dimensions Maintain The Necessary Airflow For Your Engine's Optimum Performance And Ensure A Perfect Fit In Your Vehicle's Air Intake System..
Features
- Ideal Replacement: This Air Filter Intake Hose is a perfect replacement solution for your 70cc 90cc 110cc 125cc ATV QUAD PIT PRO DIRT BIKE GY6 scooter. With its precise design and optimal functionality, it perfectly matches the performance characteristics of the mentioned vehicles, providing a seamless replacement option.
- Precise Dimensions: The Air Filter Intake Tube flaunts a total length of approximately 150mm/5.9in and an inner diameter of around 43mm/1.7in. These precise dimensions maintain the necessary airflow for your engine's optimum performance and ensure a perfect fit in your vehicle's air intake system.
- Better air filtering function: This Air Filter Inlet Hose is proficient in delivering superior air filtering function. This ensures that your engine gets a clean, dust-free air supply for combustion, enhancing its performance and lifespan. Enjoy peace of mind with this superior-quality air filter intake hose in your engine system.
- Practical and Versatile: The Air Filter Inlet Tube is highly versatile and can be used extensively for modification, replacement, repair, and refurbishment of the original car parts. Its flexible and adaptable design caters to a plethora of air intake needs across various vehicle models.
- Robust and Durable Construction: Made from superior-grade rubber materials, this Air Filter Intake Pipe boasts excellent compressibility, toughness, and durability. It is engineered to withstand tough conditions and deliver a long service life, providing unparalleled value for money and reliability.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #4
Motor Brushes Set, ATV Motor Carbon Brush Kit Strong Power Output Increase Speed Brushes Set for 2000-5000lb Winch
Asin: B0CN38KSS5 | Model: Pissente9ekqngvf2x | PartNumber: Pissente9ekqngvf2x
[Increase Speed] Reduce Friction For Faster And More Efficient Winching Operations.
[Easy Installation] Simple Design For Easy Installation And Replacement Without Specialized Skills Required.
[Long Lasting] Built To Withstand Heavy-Duty Use With A Longer Lifespan.
[Enhanced Performance] Improve Power Output For A Stronger And More Reliable Winching Experience.
Features
- [APPLICABLE MODEL] Perfect fit for 2000-5000lb winches, compatible with a wide range of ATV models
- [ENHANCED PERFORMANCE] Improve power output for a stronger and more reliable winching experience
- [INCREASE SPEED] Reduce friction for faster and more efficient winching operations
- [LONG LASTING] Built to withstand heavy-duty use with a longer lifespan
- [EASY INSTALLATION] Simple design for easy installation and replacement without specialized skills required
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #5
2Pcs Chassis Coolant Pipe Guard Car Chassis For Tesla Model 3 Chassis Condenser Tube Protection Cover
Asin: B0C41KNJN5 | Model: Pissentexc8u32sqmv | PartNumber: Pissentexc8u32sqmv
Economical Protection: The Original Resin Shell Is Very Thin And Can Be Damaged By Slight Impact, Causing Coolant To Leak Which Will Cause The Battery Temperature To Rise Sharply And Increase Safety Hazards. Additionally, The Repairs Are Costly, But This Can Be Perfectly Avoided With Our Coolant Hose Guard Plates.
Applicable Model: This Coolant Pipe Guard Protector Is Specially Designed And Based On Original Data, Perfect Replacement For Tesla Model 3 2021‑2023..
Perfect Fitment: Using The Original Screw Hole To Install Without Drilling. Our Guard Plates Come With Screws For A More Secure Installation But The Original Screw Can Also Be Used. To Prevent Shedding, The Hole Position Is Designed And Seamless Fit..
Strong Construction: Made Of Carbon Steel With Good Thermal Conductivity And Designed To Be 2Mm Thickness, So Our Coolant Guard Protector Is Scratch, Abrasion And Rust Resistant, Therefore You Don't Have To Worry About Damages.
Features
- Safety Improvement: Our chassis coolant pipe guard can greatly protect the coolant hose from external impact and prevent coolant leakage, providing extra protection and safe driving for you and your family.
- Strong Construction: Made of carbon steel with good thermal conductivity and designed to be 2mm thickness, so our coolant guard protector is scratch, abrasion and rust resistant, therefore you don't have to worry about damages
- Economical Protection: The original resin shell is very thin and can be damaged by slight impact, causing coolant to leak which will cause the battery temperature to rise sharply and increase safety hazards. Additionally, the repairs are costly, but this can be perfectly avoided with our coolant hose guard plates
- Perfect Fitment: Using the original screw hole to install without drilling. Our guard plates come with screws for a more secure installation but the original screw can also be used. To prevent shedding, the hole position is designed and seamless fit.
- Applicable Model: This coolant pipe guard protector is specially designed and based on original data, perfect replacement for Tesla Model 3 2021 2023.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #6
Carburetor Pilot Jets, Carburetor Main Intermediate Jet Kit 35 0995 Copper Carb Main Jet Slow Pilot Jet Kit for S&S B E G Carburetors
Asin: B0C45BNJWH | Model: Pissentetvwmg42d58 | PartNumber: Pissentetvwmg42d58
Premium Material: The Carburetor Main Intermediate Jet Set Is Made Of High Strength Copper Material, Which Is Tough, Wear Resistant, Impact Proof And Anti Aging..
Main Jet Parameter: The Jet Nozzles Are 0.062In, 0.064In, 0.066In, 0.068In, 0.070In, 0.072In, 0.074In, 0.076In, 0.078In, 0.080In, 0.082In..
Intermediate Jet Parameter: The Intermediate Nozzles Are 0.025In, 0.0265In, 0.028In, 0.0295In, 0.031In, 0.032In, 0.033In..
Application: The Carburetor Main Intermediate Jet Kit Is A Replacement For S&S B E G Carburetors, Replacement For Oho Shorty Carburetors By V‑Twin Mfg..
Features
- OE Number: The referencing OE number of this carburetor main intermediate jet is 35 0995, which is molded and designed depend on the original data.
- Application: The carburetor main intermediate jet kit is a replacement for S&S B E G Carburetors, replacement for OHO shorty carburetors by V Twin MFG.
- Premium Material: The carburetor main intermediate jet set is made of high strength copper material, which is tough, wear resistant, impact proof and anti aging.
- Intermediate Jet Parameter: The intermediate nozzles are 0.025in, 0.0265in, 0.028in, 0.0295in, 0.031in, 0.032in, 0.033in.
- Main Jet Parameter: The jet nozzles are 0.062in, 0.064in, 0.066in, 0.068in, 0.070in, 0.072in, 0.074in, 0.076in, 0.078in, 0.080in, 0.082in.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #7
Pull Start Assembly, Recoil Starter Assembly Metal Alloy Pa6 Gf30 1716502S Replacement Recoil Pull Starter Start Cup Assembly For Kohler Ch270 Ch260 Engine
Asin: B0C43Y7PD8 | Model: 0 | PartNumber: 0
Perfect Fitment: This Recoil Starter Assembly Is Replacement For Kohler Ch270 Ch260 Engine. And The Oe Number Is 1716502S..
Easy Installation: The Cable Is Easy To Retract. Reasonable Roller Design, So That The Drawing Process Without Expansion Quickly Obtained Results..
Multi Tests: The Recoil Starter Has Been Repeatedly Tested By Senior Experts To Select The Best Production Plan, Which Is Produced By A Very Compact Machine..
Premium Material: Recoil Starter Is Made Of Premium Metal Alloy Material,Which Is Not Easy To Break. It Also Has Long Life And Stable Performance..
Features
- Black Coating: The surface has a black coating, which is rust resistant and durable while maintaining a beautiful appearance.
- Premium Material: Recoil starter is made of premium metal alloy material,which is not easy to break. It also has long life and stable performance.
- Perfect Fitment: This recoil starter assembly is replacement for Kohler CH270 CH260 Engine. And the OE number is 1716502S.
- Multi Tests: The recoil starter has been repeatedly tested by senior experts to select the best production plan, which is produced by a very compact machine.
- Easy installation: The cable is easy to retract. Reasonable roller design, so that the drawing process without expansion quickly obtained results.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #8
Tilt End Cap, Aluminum Alloy Rubber Trim Cylinder End Cap 6H1 43821 11 00 Tilt End Cap Replacement For 70Tlry 90Tlra 60Tlra 70Hp
Asin: B0C782LD7V | Model: Pissentedeg5ruvq93 | PartNumber: Pissentedeg5ruvq93
Durable Material: The Inclined End Cover With Is Made Of Heavy Aluminum Alloy, The Surface Is Treated By Hard Anode, Very Tough, Rust Resistant, Impact Resistant..
Easy To Install: The Tilt Trim End Cap Is Easy And Convenient For You To Install And Use, Which Has No Complicated Or Difficult Operation..
Fitment: It Is Replacement For 70Tlry Power Trim & Tilt Assy 2000, Replacement For 90Tlra Power Trim & Tilt Assy 2002, Replacement For 70Hp 70Tlr Power Trim & Tilt Assy..
Ideal Replacement: This Tilt Trim End Cap Is For Direct Refurbishment To Replace Old Damaged Lift End Lids And Get Your Lift Back To Work In No Time..
Features
- OE Number: The reference part number of the tilt trim end cap is 6H1 43821 11 00. Please double check whether the item number is suitable.
- Ideal replacement: This tilt trim end cap is for direct refurbishment to replace old damaged lift end LIDS and get your lift back to work in no time.
- Durable Material: The inclined end cover with is made of heavy aluminum alloy, the surface is treated by hard anode, very tough, rust resistant, impact resistant.
- Fitment: It is replacement for 70TLRY Power Trim & Tilt Assy 2000, replacement for 90TLRA Power Trim & Tilt Assy 2002, replacement for 70HP 70TLR Power Trim & Tilt Assy.
- Easy to Install: The tilt trim end cap is easy and convenient for you to install and use, which has no complicated or difficult operation.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #9
Trailer Brakes Breakaway Kit with Switch, 12V LED Test Break Away System Emergency Brake Switch Accessories (Without Battery)
Asin: B0C6XJ4N74 | Model: Pissenteeh7a3d2b1t | PartNumber: Pissenteeh7a3d2b1t
[Simple Installation] - Easy Installation Using An Onboard Battery Attached To The Trailer And A Switch System Connected To Both The Trailer And The Vehicle..
[Excellent Performance] - Professional Manufacturing With Exquisite Workmanship, Weatherproof And Offers Protection For The Charger..
[Activates Trailer Brakes] - Upon Separation From The Tow Vehicle, Activates Trailer Brakes For Faster Stopping..
[Led Indicator] - Equipped With An Led Indicator Light To Show The State Of The System Is Fully Charged, Charging, Or Recharging..
Features
- [PREMIUM MATERIAL] - This trailer brakes breakaway kit made of premium PP material for wear resistance, rust-proofing, and durability.
- [LED INDICATOR] - Equipped with an LED indicator light to show the state of the system is fully charged, charging, or recharging.
- [SIMPLE INSTALLATION] - Easy installation using an onboard battery attached to the trailer and a switch system connected to both the trailer and the vehicle.
- [ACTIVATES TRAILER BRAKES] - Upon separation from the tow vehicle, activates trailer brakes for faster stopping.
- [EXCELLENT PERFORMANCE] - Professional manufacturing with exquisite workmanship, weatherproof and offers protection for the charger.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #10
Car Pcv Valve Kit, Aluminum Engine PCV Valve N54 Twin Turbo E88 2008-10 Twin Turbo E92 2007-08 Twin Turbo E60 E93 2011 Z4 Rdstr Sdrive35I 30L 1M 30L Twin Turbo Engines
Asin: B0C44ZDPRZ | Model: Pissentevwhipzb18e | PartNumber: Pissentevwhipzb18e
Fitment: Pcv Valve Is Fit For N54 Twin Turbo Engines. Replacement For 135I 3.0L, Twin Turbo E82, E88 2008‑10, Replacement For 1M 3.0L, Twin Turbo E82 2011‑12..
Premium Material: The Kit Is Made Of 6061 Aluminum Material, Rust Proof, High Strength, Not Easy To Break, Sturdy And Practical..
Professional Manufacturing: Strictly Follows The Factory Quality Control, High Performance, Strong Reliability, Making Sure Safety Use..
Function: The Gas In The Crankcase Is Directed To The Intake Manifold Through The Pcv Valve, Which Prevents Icing At The Throttle, Inadequate Combustion And Deteriorating Emissions..
Features
- Anodized Design: A unique hard anodizing process is used to maintain a long lasting finish and strong durability.
- Function: The gas in the crankcase is directed to the intake manifold through the PCV valve, which prevents icing at the throttle, inadequate combustion and deteriorating emissions.
- Fitment: PCV valve is fit for N54 Twin Turbo Engines. Replacement for 135i 3.0L, twin turbo E82, E88 2008 10, replacement for 1M 3.0L, twin turbo E82 2011 12.
- Professional Manufacturing: Strictly follows the factory quality control, high performance, strong reliability, making sure safety use.
- Premium Material: The kit is made of 6061 aluminum material, rust proof, high strength, not easy to break, sturdy and practical.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #11
Glow Plug Control Unit Wearproof A6429007701 Abs K-01 E320 R320 2007-2009 Ml350 2010-2014 S350 2012-2013 R350 2010-2012 Sprinter 2500 3500 2012-2016 Ml320 E350 2010-2013 Gl320 Glow Plug Relay
Asin: B0C78HVXZ7 | Model: Pissentegc75tvq8dx | PartNumber: Pissentegc75tvq8dx
Fitment: Glow Plug Controller Is Fit For E350 2010‑2013, Fit For E320, Gl320,Ml320, R320 2007‑2009, Fit For Ml350 2010‑2014, Fit For R350 2010‑2012, Fit For S350 2012‑2013..
Performance: Compact Structure And High To Meet Your Needs, Bringing You A Reliable And Stable Use Experience..
Oe Number: Glow Plug Relay Replace Part Number Are A6429007701, 6429007701. Please Make Sure The Oe Number Matches The Part You Are Replacing..
Function: Glow Plug Control Unit Can Increases The Air Temperature In The Engine Cylinders And Reduces Consumption..
Features
- Perfect Fit: Manufactured in accordance with original specifications to ensure correct installation and easy installation.
- Function: Glow plug control unit can increases the air temperature in the engine cylinders and reduces consumption.
- Fitment: Glow plug controller is fit for E350 2010 2013, fit for E320, GL320,ML320, R320 2007 2009, fit for ML350 2010 2014, fit for R350 2010 2012, fit for S350 2012 2013.
- OE Number: Glow plug relay replace part number are A6429007701, 6429007701. Please make sure the OE number matches the part you are replacing.
- Performance: Compact structure and high to meet your needs, bringing you a reliable and stable use experience.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #12
Ignition Coil Resistor, Metal + Ceramic Car Ignition Coil Resistor Ballast Resistor Wear Resistance Device Auto Replacement Part Fit for 1.5 Ohm Classic Car
Asin: B0CMH96NT3 | Model: Pissenteg1rdk23wi7 | PartNumber: Pissenteg1rdk23wi7
Superior Craftsmanship: With Meticulous Attention To Detail, Our Ceramic Ballast Resistor Exhibits Fine Workmanship, Showcasing Its Exceptional Wear Resistance. It Is Built To Withstand The Test Of Time And Provide Long-Lasting Durability.
Easy Installation: Our Car Ignition Coil Resistor Is Incredibly Easy To Install, Requiring No Complicated Tools Or Extensive Knowledge. Experience The Convenience Of A Seamless Installation Process And Enjoy The Benefits Without Any Hassle.
Oe Standard Replacement: As An Original Standard Replacement Part, Our Metal Ignition Coil Resistor Is Your Perfect Solution For Replacing Old And Worn-Out Components. Restore Your Ignition System's Functionality And Reliability Effortlessly.
Premium Metal Materials: Crafted From Metal Materials, Our Ignition Coil Resistor Replacement Is Sturdy, Durable, And Designed To Have A Significantly Longer Service Life. You Can Rely On Its Performance For Years To Come.
Features
- PERFECT FOR: Designed for classic car ignitions from the late 1960s to the mid 1980s, our ignition coil resistor is the ideal replacement for vintage vehicles, ensuring optimal performance and reliability
- PREMIUM METAL MATERIALS: Crafted from metal materials, our ignition coil resistor replacement is sturdy, durable, and designed to have a significantly longer service life. You can rely on its performance for years to come
- SUPERIOR CRAFTSMANSHIP: With meticulous attention to detail, our ceramic ballast resistor exhibits fine workmanship, showcasing its exceptional wear resistance. It is built to withstand the test of time and provide long-lasting durability
- OE STANDARD REPLACEMENT: As an original standard replacement part, our metal ignition coil resistor is your perfect solution for replacing old and worn-out components. Restore your ignition system's functionality and reliability effortlessly
- EASY INSTALLATION: Our car ignition coil resistor is incredibly easy to install, requiring no complicated tools or extensive knowledge. Experience the convenience of a seamless installation process and enjoy the benefits without any hassle
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #13
Bov Flange Adapter C Clip O Blow Off Valve C Clip O Ring and Backup Ring Kit Replacement For Hks Blowoff Valve Flange Adapter
Asin: B0C4KFS75M | Model: 0 | PartNumber: 0
Lasting Performance: High Hardness, Not Easy To Bend, High Temperature And Rust Resistance, And Can Be Stably Used For A Long Time..
Practical Function: Our C Clip And O Accessories Can Directly Replace The Old And Damaged Original Gasket, With Better Sealing And Connection Fixing Performance, Which Effectively Improves The Performance Of The Car..
Exquisite Workmanship: Made From Sturdy Metal Alloy And Rubber Material, With Exquisite And Professional Manufacturing, Which Has Great Wear Resistance..
Convenient Operation: This Accessory Can Be Installed Directly, Without Modification, Which Is Convenient, Fast And Time Saving..
Features
- Applicable Scenario: This blow off valve C clip and O completely conforms to original standard, which is perfect replacement for HKS blow off valve flange adapter.
- Convenient Operation: This accessory can be installed directly, without modification, which is convenient, fast and time saving.
- Lasting Performance: High hardness, not easy to bend, high temperature and rust resistance, and can be stably used for a long time.
- Exquisite Workmanship: Made from sturdy metal alloy and rubber material, with exquisite and professional manufacturing, which has great wear resistance.
- Practical Function: Our C clip and O accessories can directly replace the old and damaged original gasket, with better sealing and connection fixing performance, which effectively improves the performance of the car.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #14
Valve Cover Oil Cap, Billet Aluminum Valve Cover Oil Cap with Breather Engine Oil Filler Plug for LSX LS1/LS6/LS2/LS3/LS7
Asin: B0C7S6234M | Model: Pissentengm487e26d | PartNumber: Pissentengm487e26d
[High Protection]: The Breathers Are Constructed With Pretreated Cotton/Gauze Filter Element That Can Protect Your Engine From Dust And Impurities, Improve Engine Performance, And Allow It To Breathe Freely, Oil Cap With Breather.
[Superior Materials]: Valve Cover Oil Cap Is Machined From Solid Billet Aluminum, Durability, And Solid To Use; Which Has High Performance And Firstclass Quality, Which Can Make Your Vehicle Work More Efficiently, Valve Cover Oil Cap Breather.
[Sales Service]: If You Have Any Questions About Our Products, Please Feel Free To Contact Us; Our Professional And Reliable Customer Service Will Try Our Best To Reply Within 24 Hours And Provide You With Appropriate Solutions, Oil Cap With Breather For Lsx.
[Easy To Install]: Adopting The Humanized Design, The Installation Process Is Simple And Convenient And Can Directly Replace Old Or Damaged Parts, Saving Time And Effort And More Convenient Use,Perfect Replacement For Old Or Damaged Ones, Valve Cover Breather.
Features
- [Applicable Information]: Valve cover oil cap with original standard, it's very suitable with your car, perfectly designed for LSX LS1/LS6/LS2/LS3/LS7; Please confirm your model before you buying,Valve Cover Oil Cap
- [Easy to install]: Adopting the humanized design, the installation process is simple and convenient and can directly replace old or damaged parts, saving time and effort and more convenient use,perfect replacement for old or damaged ones, Valve Cover Breather
- [High Protection]: The Breathers are constructed with pretreated cotton/gauze filter element that can protect your engine from dust and impurities, improve engine performance, and allow it to breathe freely, Oil Cap with Breather
- [Sales Service]: If you have any questions about our products, please feel free to contact us; Our professional and reliable customer service will try our best to reply within 24 hours and provide you with appropriate solutions, Oil Cap with Breather for LSX
- [Superior Materials]: Valve cover oil cap is machined from solid billet aluminum, durability, and solid to use; Which has high performance and firstclass quality, which can make your vehicle work more efficiently, Valve Cover Oil Cap Breather
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #15
Spark Plug Thread Repair Tools, Metal M12x1.25 Inserts M14x1.25 Tap 14mm Rethreaded Kit Professional Spark Plug Thread Hole Repair Tools Kit For Gasoline Engines Generators
Asin: B0CN36NTLG | Model: Pissentem16hdsg4uy | PartNumber: Pissentem16hdsg4uy
Durable Stainless Steel Inserts: Our Threaded Inserts Are Made Of Stainless Steel, Ensuring Durability And Longevity. With Galvanized Treatment, These Inserts Can Withstand The Rigors Of Automotive Repairs And Provide Reliable Thread Restoration.
Suitable For Gasoline Engines And More: Our Thread Repair Tools Are Specifically Designed For Gasoline Engines, Generators, And Other Machinery. Enjoy The Benefits Of Efficient And Labor-Saving Repairs, While Restoring The Functionality Of Your Equipment.
High Speed Steel Tap For Efficient Repairs: The Included Threaded Tap Is Crafted From High-Speed Steel, Known For Its Exceptional Hardness And Resistance To Heat. This Ensures Efficient And Effective Repairs, Delivering Professional-Grade Results Every Time.
Standard Sizes For Versatile Application: Designed With Standard Thread Sizes, Our Spark Plug Tap Inserts Are Suitable For Repairing Spark Plugs With 14Mm X 1.25Mm Threads. Ensure Compatibility And Seamless Repairs With This Dependable Tool Set.
Features
- PROFESSIONAL SPARK PLUG THREAD REPAIR TOOLS: Enhance your automotive repair arsenal with our professional spark plug thread repair tools. This comprehensive set includes 10pcs M12 x 1.25 thread inserts and a M14 x 1.25 thread tap, providing everything you need for efficient and precise repairs
- STANDARD SIZES FOR VERSATILE APPLICATION: Designed with standard thread sizes, our spark plug tap inserts are suitable for repairing spark plugs with 14mm x 1.25mm threads. Ensure compatibility and seamless repairs with this dependable tool set
- DURABLE STAINLESS STEEL INSERTS: Our threaded inserts are made of stainless steel, ensuring durability and longevity. With galvanized treatment, these inserts can withstand the rigors of automotive repairs and provide reliable thread restoration
- HIGH SPEED STEEL TAP FOR EFFICIENT REPAIRS: The included threaded tap is crafted from high-speed steel, known for its exceptional hardness and resistance to heat. This ensures efficient and effective repairs, delivering professional-grade results every time
- SUITABLE FOR GASOLINE ENGINES AND MORE: Our thread repair tools are specifically designed for gasoline engines, generators, and other machinery. Enjoy the benefits of efficient and labor-saving repairs, while restoring the functionality of your equipment
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #16
Rotating Car Wash Brush, 360 Rotating Bucket Spin mop Car Cleaning Tool with Adjustable Non Slip Long Handle for Car RV Truck Garden
Asin: B09NC7PSNL | Model: Aramoxyp76c9ifto1092 | PartNumber: Aramoxyp76c9ifto1092
Non-Slip Handle: With Non-Slip Handle For Comfortable Grip. It Can Be Lengthened Arbitrarily To Save Water Pipes..
Soft Surface: This Car Cleaning Brush Has Soft And Delicate Touch, Feel Comfortable, It Doesn't Scratch The Car Surface..
Wide Range Application: This 360° Automatically Rotating Car Brush Suitable For All Kinds Of Life Occasions, Help You To Clean The Floor, Window, Wash The Blanket, Fences..
Strong Water Absorption: Made Of High Quality Pp Material Brush Head, High Foamed And Strong Water Absorption, It Can Effectively Remove Dirt..
Features
- Rotate Automatically: The blue brush can rotate freely, carefully clean any position on car body. Once connect the brush to the tap,the washing brush will rotate automatically cause of the high pressure water. Through turning the red knob, you can control the pressure of the current.
- Strong Water Absorption: Made of high quality PP material brush head, high foamed and strong water absorption, it can effectively remove dirt.
- Non-slip Handle: With Non-slip handle for comfortable grip. It can be lengthened arbitrarily to save water pipes.
- Wide Range Application: This 360 automatically rotating car brush suitable for all kinds of life occasions, help you to clean the floor, window, wash the blanket, fences.
- Soft Surface: This car cleaning brush has soft and delicate touch, feel comfortable, it doesn't scratch the car surface.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
Dimensions: 4.72 x 11.42 x 7.48 Inches
See On Amazon #17
Window Crank Handle, 2pcs Car Auto Window Crank Handle Door Window Crank Handle Winder Set for Older Models for Ford
Asin: B0C7GCSR9Z | Model: Pissente7nabp2qimf | PartNumber: Pissente7nabp2qimf
Lightweight And Portable: The Window Crank Handle Is Lightweight And Portable, Easy To Carry And Apply.
Fitment: Suitable For Classic Vehicles Such As For Ford, And Most Older Models And Using Hawley Carburetors.
Easy Installation: Simple Design, Convenient To Install.
Cool Design: The Car Window Crank Is Vintage Style, Cool And Beautiful.
Features
- Great Quality Aluminium Alloy Material: The Window Handle is made of quality material, solid and durable to use
- Cool Design: The Car Window Crank is vintage style, cool and beautiful
- Lightweight and Portable: The Window Crank Handle is lightweight and portable, easy to carry and apply
- Easy Installation: Simple design, convenient to install
- Fitment: Suitable for classic vehicles such as for Ford, and most older models and using hawley carburetors
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #18
Two Jaw Twin Legs Bearing Gear Puller Remover Hand Tool Removal Kit, Adjustable Clamping Depth, Hexagonal Screw, Fits for Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel
Asin: B0CN37T6XH | Model: Pissented3hawu6mqg-01 | PartNumber: Pissented3hawu6mqg-01
[Adjustable Clamping Depth] Two Jaws With Adjustable Depth, Suitable For Gears And Bearings Of Various Sizes..
[Non-Slip And High Strength] Comes With A Hexagonal Screw And Thread For Firm Fastening And High Strength..
[Versatile Application] Ideal For Automotive Flywheels, Motorcycle And Bicycle Wheels, Pump And Generator Bearings, And Machine Bearings..
[Bilateral Rotation] The Puller Can Rotate In Both Directions, Allowing For Precise Stretching And Easy Access..
Features
- [SOLID AND DURABLE] Made of carbon steel with a special heat treatment process for increased solidity and durability.
- [BILATERAL ROTATION] The puller can rotate in both directions, allowing for precise stretching and easy access.
- [ADJUSTABLE CLAMPING DEPTH] Two jaws with adjustable depth, suitable for gears and bearings of various sizes.
- [VERSATILE APPLICATION] Ideal for automotive flywheels, motorcycle and bicycle wheels, pump and generator bearings, and machine bearings.
- [NON-SLIP AND HIGH STRENGTH] Comes with a hexagonal screw and thread for firm fastening and high strength.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #19
09147 1C000 Hook Towing Eye Loop Replacement For Hyundai Accent Verna Black
Asin: B0C42JX9LH | Model: Pissente5u1wqsge2g | PartNumber: Pissente5u1wqsge2g
Oe Number: The Part Numbers For Reference Are 6001546734, 09147‑1C000, Gs1d50ej0, Bbm450ej0a, 5085A006, Mr964833, Mr575531, 5379A111..
Premium Material: Eye Tow Hook Is Made Of Steel Alloy Material, Durable And Able To Withstand The Harsh Test Of Components..
Tensile Resistance: Tow Hook Is Replacement Of The Original One, And It Has A Good Tensile Resistance And Allows Your Car To Get Out Of Danger Safely..
Easy To Install: Tow Hook Has The Same Size As The Original. Just Screw The Trailer Hook To The Place Where It Should Be Installed, Which Can Save You A Lot Of Time..
Features
- Applicable Model: Eye tow hook is replacement for Hyundai Accent Verna 2005 ; replacement for Hyundai Getz 2006 ; replacement for Kia Picanto 2005 ; replacemet for Mazda 3 2010 .
- Easy to Install: Tow hook has the same size as the original. Just screw the trailer hook to the place where it should be installed, which can save you a lot of time.
- OE Number: The part numbers for reference are 6001546734, 09147 1C000, GS1D50EJ0, BBM450EJ0A, 5085A006, MR964833, MR575531, 5379A111.
- Tensile Resistance: Tow hook is replacement of the original one, and it has a good tensile resistance and allows your car to get out of danger safely.
- Premium Material: Eye tow hook is made of steel alloy material, durable and able to withstand the harsh test of components.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #20
Pissente Motor Sprocket, Motor Chain Sprocket Portable 25H 13T Metal H Chain Motor Sprocket Master Link Replacement Motorcycle Front Engine Sprocket for MY1020 Motor
Asin: B0C58DSTLH | Model: Pissentee7k4w0gndt | PartNumber: Pissentee7k4w0gndt
Professional Manufacture For Easy Installation: This 25H 13T Chain Sprocket Is Professionally Manufactured, Making Installation Effortless. With Its Design, You Can Easily Mount It Onto Your Motorized Bicycle Without Any Hassle. This Allows For A Smooth And Trouble-Free Installation Process, Saving You Time And Effort..
Lightweight And Compact: The 13T Sprocket Is Designed To Be Lightweight And Compact. Its Small Size Makes It Easy To Handle And Install. This Compact Design Does Not Add Unnecessary Weight To Your Bicycle, Ensuring Optimal Performance..
Reliable Performance And Stability: This Chain Sprocket Offers Stable Performance And High Reliability. Its Precise Construction And Accurate Teeth Ensure Smooth Movement And Efficient Power Transfer. You Can Rely On This Sprocket To Deliver Consistent Performance, Enhancing The Overall Functioning Of Your Motorized Bicycle..
High-Quality And Durable Construction: The Motor Sprocket Is Made Of High-Quality Metal Material, Which Guarantees Its Durability And Practicality. It Is Built To Withstand Rigorous Use And Is Not Easily Susceptible To Breakage. This Ensures Long-Lasting Performance And Reliability, Providing Peace Of Mind During Use..
Features
- Perfect fit for MY1020 motor: This Motor Chain Sprocket features 13 teeth and is designed specifically for use with a 25H chain. It is suitable for MY1020 motors, ensuring a perfect fit and compatibility with your motorized bicycle.
- High-quality and durable construction: The Motor Sprocket is made of high-quality metal material, which guarantees its durability and practicality. It is built to withstand rigorous use and is not easily susceptible to breakage. This ensures long-lasting performance and reliability, providing peace of mind during use.
- Professional manufacture for easy installation: This 25H 13T Chain Sprocket is professionally manufactured, making installation effortless. With its design, you can easily mount it onto your motorized bicycle without any hassle. This allows for a smooth and trouble-free installation process, saving you time and effort.
- Reliable performance and stability: This Chain Sprocket offers stable performance and high reliability. Its precise construction and accurate teeth ensure smooth movement and efficient power transfer. You can rely on this sprocket to deliver consistent performance, enhancing the overall functioning of your motorized bicycle.
- Lightweight and Compact: The 13T sprocket is designed to be lightweight and compact. Its small size makes it easy to handle and install. This compact design does not add unnecessary weight to your bicycle, ensuring optimal performance.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #21
Roller Guide Wheel, Cutting Roller Guide Wheel Spacer High Speed Steel Oxygen Cutting Gun Accessories Plasma Cutter Guide Wheel for Plasma Cutter 40A/PT31 22-45mm
Asin: B0C74B1P97 | Model: Pissentesw379zhxdt | PartNumber: Pissentesw379zhxdt
Height Adjustment Range: The Height Adjustment Range Of The Plasma Cutting Equipment Is 22-45Mm Which Can Be Used With Pt31 Oxygen Cutting Gun. The Durable Construction Ensures Smooth Guidance For Accurate Cutting Result,Cutting Torches Guide Wheel.
Direct Replacement: With Great Workmanship, This Cutting Torches Guide Wheel Is A Perfect Replacement For The Old Or Damaged One. Easy To Install, No Complicated Operation, Save Time And Effort, But Professional Installation Is Still Recommended,High Speed Steel Cutting Roller Guide Wheel.
Durable To Use: The Guide Wheel Has Brass Plating Surface Processing, Not Easy To Rust And Resistant. Precision Cutting Has Never Been Easier With Its Durable Construction, Helping Guide The Cutting Torch Smoothly,Plasma Cutter Guide Wheel.
Simple To Operate: This Cutting Roller Guide Wheel Is Simple To Use, The Range And Tightness Can Be Adjusted According To The Size Of The Welding Clamp Head. Trust In Its Reliable Performance To Keep Your Plasma Cutter Running At Its Best,Roller Guide Wheel.
Features
- QUALITY HIGH SPEED STEEL: The roller guide wheel is made of highspeed steel material, durable to use, long service life and excellent performance, no need to change frequently, and worthy of your trust,Cutting Roller Guide Wheel
- SIMPLE TO OPERATE: This cutting roller guide wheel is simple to use, the range and tightness can be adjusted according to the size of the welding clamp head. Trust in its reliable performance to keep your plasma cutter running at its best,Roller Guide Wheel
- HEIGHT ADJUSTMENT RANGE: The height adjustment range of the plasma cutting equipment is 22-45mm which can be used with PT31 oxygen cutting gun. The durable construction ensures smooth guidance for accurate cutting result,Cutting Torches Guide Wheel
- DURABLE TO USE: The guide wheel has brass plating surface processing, not easy to rust and resistant. Precision cutting has never been easier with its durable construction, helping guide the cutting torch smoothly,Plasma Cutter Guide Wheel
- DIRECT REPLACEMENT: With great workmanship, this cutting torches guide wheel is a perfect replacement for the old or damaged one. Easy to install, no complicated operation, save time and effort, but professional installation is still recommended,High Speed Steel Cutting Roller Guide Wheel
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #22
Distributor Gear Small Block, Brass Bronze Distributor Drive Gear Roller Cam Distributor Gear Replacement Car Distributor Gear Accessories Fit Distributor Gears
Asin: B0C6Y6M7S2 | Model: Pissentegtuc8bye07 | PartNumber: Pissentegtuc8bye07
Designed For: This Roller Cam Distributor Gear Is Fit For Use On Msd And Other Distributors That Have A .500In Shaft. Please Kindly Check The Compatibility And Specifications Before Ordering,Distributor Drive Gear.
Direct Replacement: Based On The Original Factory Specifications, A Direct Replacement For The Old Or Broken One, Simple Installation, No Need Complicated Tools, This Bronze Distributor Gear Is Convenient For Using, Saving Your Time And Energy,Small Block Distributor.
High Performance: Exquisite Workmanship, Stable Performance And High Reliability. Professionally Manufactured, Our Gear Distributor Drive Gear Is Safe And Reliable To Use,Bronze Distributor Gear.
Precision Machined: Protect Your Performance Cam With Precision Machined Bronzed Gears. First Requirement When Installing A Steel Roller Cam, This Distributor Gear Replacement Features A High Strength Tooth Design That Resists Wear,Big Block Distributor.
Features
- QUALITY BRASS MATERIAL: The distributor shaft gear is made of high quality brass material, anti- and high strength for maximum durability, long service life and excellent performance, no need to change frequently, and worthy of your trust,Distributor Gear
- PRECISION MACHINED: Protect your performance cam with precision machined bronzed gears. First requirement when installing a steel roller cam, this distributor gear replacement features a high strength tooth design that resists wear,Big Block Distributor
- DESIGNED FOR: This roller cam distributor gear is fit for use on MSD and other distributors that have a .500in shaft. Please kindly check the compatibility and specifications before ordering,Distributor Drive Gear
- HIGH PERFORMANCE: Exquisite workmanship, stable performance and high reliability. Professionally manufactured, our gear distributor drive gear is safe and reliable to use,Bronze Distributor Gear
- DIRECT REPLACEMENT: Based on the original factory specifications, a direct replacement for the old or broken one, simple installation, no need complicated tools, this bronze distributor gear is convenient for using, saving your time and energy,Small Block Distributor
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #23
Motorcycle Helmet Buckle, 5pcs Motorcycle Helmets Speed Clip Chin Strap, Quick Release Disconnect Buckle, Universal Motorcycle Helmets Speed Clip Chin Strap
Asin: B09TPX99XJ
Function: The Chin Strap Release Buckle Can Can Keep Your Helmet Stably And Avoid It From Shaking When Riding Motorcycle. A Safe, Fast And Convenient Way To Securing Your Helmet..
Package Includes: This Package Includes 5 Universal Motorcycle Helmet Buckle, Please Allow 0.5 - 1 Inch Error Due To Manual Measurement, Thanks For Your Understanding..
Easy To Install: Easy To Install And Replace, No Extra Parts Are Needed, You Can Easily Install This Chin Strap Release Buckle, Save Your Time And Energy..
Quick Release: Helmets Release Buckle Features Speed Clip, Quick Release Performance. Economical And Practical, High Reliability, Gives You A Good Using Experience..
Features
- Function: The chin strap release buckle can can keep your helmet stably and avoid it from shaking when riding motorcycle. A safe, fast and convenient way to securing your helmet.
- Quick Release: Helmets release buckle features speed clip, quick release performance. Economical and practical, high reliability, gives you a good using experience.
- Function: The chin strap release buckle can can keep your helmet stably and avoid it from shaking when riding motorcycle. A safe, fast and convenient way to securing your helmet.
- Easy to Install: Easy to install and replace, no extra parts are needed, you can easily install this chin strap release buckle, save your time and energy.
- Package Includes: This package includes 5 universal motorcycle helmet buckle, please allow 0.5 - 1 inch error due to manual measurement, thanks for your understanding.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #24
Solar Panel Kit, 600W 18V Monocrystalline Silicon Solar Panel Kit, 12V 24V 100A Solar Battery Charger Controller Battery Charging Kit for Outdoor Farming Home Camping
Asin: B0C7VLVYV1 | Model: Pissentemrosnuyh1e | PartNumber: Pissentemrosnuyh1e
High Efficiency: With High Conversion Efficiency, This Solar Power Panel Delivers An Impressive Output. It Performs Efficiently Even Under Low Light Conditions, Making It Ideal For Use In Various Climates And Regions. Its High Stability And Good Durability Assure A Long Service Life, Providing Great Value For Money..
Easy To Use: To Use, Simply Place The Solar Panel In A Position Facing The Sun. Then, Connect The Corresponding Interface On The Wiring To The Products Needing Electricity, Such As Fans, Lamps, And More. The Convenience This System Offers Will Make Powering Your Outdoor Adventures Easier Than Ever..
Direct Compatibility: This Solar Panel System Can Be Used Directly With Dc Fan Products And Water Pump Products. It Can Power A Variety Of Devices Sustainably Through Solar Energy Charging, Making It An Eco-Friendly And Practical Addition To Any Outdoor Setup..
Multi-Purpose Charger: This Battery Charger Kit Is Incredibly Versatile, Suitable For A Range Of Applications Including Car Batteries, Cars, Rvs, Boats, Airplanes, Satellites, And Even Space Stations. It's Also An Economical Solution For Outdoor Farming, Tourism, Solar Street Lights, And Planting, Providing A Reliable Power Source Whenever And Wherever It's Needed..
Features
- Lightweight and Portable: Our Solar Panel Kit is a 600W 18V Solar Charging Panel that weighs just 415g / 15.0oz. This lightweight design makes it easy to carry, especially when you're traveling outdoors and require portable power. It's a practical power solution for those who love adventuring off the grid.
- Multi-purpose Charger: This Battery Charger Kit is incredibly versatile, suitable for a range of applications including car batteries, cars, RVs, boats, airplanes, satellites, and even space stations. It's also an economical solution for outdoor farming, tourism, solar street lights, and planting, providing a reliable power source whenever and wherever it's needed.
- High Efficiency: With high conversion efficiency, this Solar Power Panel delivers an impressive output. It performs efficiently even under low light conditions, making it ideal for use in various climates and regions. Its high stability and good durability assure a long service life, providing great value for money.
- Direct Compatibility: This Solar Panel System can be used directly with DC fan products and water pump products. It can power a variety of devices sustainably through solar energy charging, making it an eco-friendly and practical addition to any outdoor setup.
- Easy to Use: To use, simply place the solar panel in a position facing the sun. Then, connect the corresponding interface on the wiring to the products needing electricity, such as fans, lamps, and more. The convenience this system offers will make powering your outdoor adventures easier than ever.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
Weight: 0.91 pounds
See On Amazon #25
Billet Aluminum Distributor Clamp Hold Down with Bolt for V8 & V6, for SBC BBC SB BB HEI & Small Cap Electronic Distributors
Asin: B0CY2LDWJ6 | Model: Pissentemy76uxvit5 | PartNumber: Pissentemy76uxvit5
[ And Stylish] The Polished And Chromed Aluminum Clamp Not Only Provides Durability But Also Adds A Stylish Touch..
[Versatile Use] Suitable For Hei, Small Cap Electronic, And Original Points Type Distributors, Making It A Versatile Clamp For Different Setups..
[Easy Installation] Included Bolt Makes Installation Quick And Hassle-..
[Universal Fit] Designed To Fit Distributors V8 & V6, As Well As Hei And Small Cap Electronic Distributors..
Features
- [ Material] These distributor hold down clamps are machined from billet aluminum, polished and chromed for durability.
- [Universal Fit] Designed to fit distributors V8 & V6, as well as HEI and small cap electronic distributors.
- [ and Stylish] The polished and chromed aluminum clamp not only provides durability but also adds a stylish touch.
- [Easy Installation] Included bolt makes installation quick and hassle-.
- [Versatile Use] Suitable for HEI, small cap electronic, and original points type distributors, making it a versatile clamp for different setups.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #26
Test Dial Indicator, Stainless Steel High Precision Dial Test Indicator Lever Type Dial Indicator Guage Digital Probe Mesuring Instrument Tool, 0.0005in Resolution, 0.03in Range
Asin: B0CPPZRCQ3 | Model: Pissentesnhde4zug0 | PartNumber: Pissentesnhde4zug0
Highly Accurate With High Sensitivity: Boasting A Resolution Of 0.0005In, Our Dial Test Indicator Tool Offers Exceptional Accuracy. Its High Sensitivity Ensures Precise Measurements, Providing You With Reliable And Consistent Results Every Time.
Clear And Accurate Dial Calibration: The Satin Chrome-Plated Finish And Dial Calibration Make Measurements Clear And Accurate. Enjoy The Convenience Of A Well-Designed Tool That Enhances Your Measuring Experience.
Shock-Proof And Waterproof: Our Dial Test Indicator Tool Is Designed To Withstand Shocks And Provide Excellent Waterproofing. With Its Exquisite Workmanship, It Is A Practical Measuring Tool That Can Be Relied On In Various Environments.
Durable Industrial Grade Stainless Steel: Crafted From Industrial Grade Stainless Steel, Our Mesuring Instrument Tool Is Built To Last. It Is Highly Durable, Wear-Resistant, And Guarantees Long-Term Usage.
Features
- STABLE AND CONVENIENT MEASUREMENTS: Experience stability and convenience with our carbide contact point design. Achieve more efficient and rapid measurements, making your tasks easier than ever
- DURABLE INDUSTRIAL GRADE STAINLESS STEEL: Crafted from industrial grade stainless steel, our mesuring instrument tool is built to last. It is highly durable, wear-resistant, and guarantees long-term usage
- HIGHLY ACCURATE WITH HIGH SENSITIVITY: Boasting a resolution of 0.0005in, our dial test indicator tool offers exceptional accuracy. Its high sensitivity ensures precise measurements, providing you with reliable and consistent results every time
- SHOCK-PROOF AND WATERPROOF: Our dial test indicator tool is designed to withstand shocks and provide excellent waterproofing. With its exquisite workmanship, it is a practical measuring tool that can be relied on in various environments
- CLEAR AND ACCURATE DIAL CALIBRATION: The satin chrome-plated finish and dial calibration make measurements clear and accurate. Enjoy the convenience of a well-designed tool that enhances your measuring experience
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #27
Oval Air Cleaner Assembly Filter Component Replacement Air Filter for EY15 EY20 167 Gasoline Generator Engine
Asin: B09YLJPLZL
【Large Filtering Area】The Oval Air Cleaner Filter Assembly Comes With Large Filtering Area And Large Dust Holding Capacity..
【Excellent Performance】The Air Cleaner Assembly Filter Component Features Stable Structure, Excellent Performance And Long Service Life..
【For Ey15 Ey20 167 Gasoline Generator】The Air Cleaner Assembly Is Suitable For Ey15 Ey20 167 Gasoline Generator, Very Practical..
【Improve Coarse Filtration Effect】High Quality Cotton Can Improve Coarse Filtration Effect And Extend The Service Life Of The Filter Component..
Features
- Good Quality Aluminum Shell The air filter adopts good quality aluminum shell, durable for a long time using.
- Improve Coarse Filtration Effect High quality cotton can improve coarse filtration effect and extend the service life of the filter component.
- Large Filtering Area The oval air cleaner filter assembly comes with large filtering area and large dust holding capacity.
- For EY15 EY20 167 Gasoline Generator The air cleaner assembly is suitable for EY15 EY20 167 gasoline generator, very practical.
- Excellent Performance The air cleaner assembly filter component features stable structure, excellent performance and long service life.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #28
Steering Wheel Hub Adapter, 3inch Aluminum Steering Wheel Hub Adapter Universal Steering Wheel Hub Adapter Conversion Spacer (Black)
Asin: B0CP9SCK7B | Model: Pissentekdhgbstfq2-01 | PartNumber: Pissentekdhgbstfq2-01
Enhanced Durability: The Aluminum Spacer Used In This Steering Wheel Hub Adapter Kit Is Made Of Aluminum. It Offers An Optimum Strength To Weight Ratio, Ensuring Durability Without Compromising On Weight. Additionally, The Aluminum Is Anodized, Providing An Added Layer Of Protection Against And Wear. The Sleek And Aesthetic Finish Adds To The Overall Appearance Of Your Car's Interior..
Important Note On Installation: It Is Important To Note That This Steering Wheel Hub Adapter Kit Is Not A Direct Bolt-On Application. It May Require Some Additional Modifications Or Professional Installation To Ensure Proper Fitment And Compatibility With Your Specific Vehicle's Steering System..
Versatile Application: This Car Steering Wheel Hub Adapter Is A Versatile Addition To Your Vehicle. It Can Be Used To Customize The Steering Wheel Position And Fitment For Various Purposes, Such As Improving Ergonomics, Accommodating Aftermarket Steering Wheels, Or Personalizing The Driving Experience According To Your Preferences..
Universal Fitment: This Steering Wheel Hub Adapter Is Designed To Have A Universal Fit, Making It Compatible With A Wide Range Of Vehicles. It Can Be Used With Most Steering Wheels, Allowing For Versatility And Convenience..
Features
- Improved driving position: The Car Steering Wheel Hub Spacer is designed to increase the wheel hub spacing of the car, effectively bringing the steering wheel closer to the driver. This adjustment enhances the driving position, allowing for better control and improved handling of the vehicle.
- Universal fitment: This Steering Wheel Hub Adapter is designed to have a universal fit, making it compatible with a wide range of vehicles. It can be used with most steering wheels, allowing for versatility and convenience.
- Enhanced durability: The Aluminum Spacer used in this Steering Wheel Hub Adapter Kit is made of aluminum. It offers an optimum strength to weight ratio, ensuring durability without compromising on weight. Additionally, the aluminum is anodized, providing an added layer of protection against and wear. The sleek and aesthetic finish adds to the overall appearance of your car's interior.
- Versatile application: This Car Steering Wheel Hub Adapter is a versatile addition to your vehicle. It can be used to customize the steering wheel position and fitment for various purposes, such as improving ergonomics, accommodating aftermarket steering wheels, or personalizing the driving experience according to your preferences.
- Important note on installation: It is important to note that this Steering Wheel Hub Adapter Kit is not a direct bolt-on application. It may require some additional modifications or professional installation to ensure proper fitment and compatibility with your specific vehicle's steering system.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #29
Battery Terminal Connectors Kits, Quick Release Disconnect Car Battery Terminal Connectors Sets, Positive Negative Connector Cable Clamp Set Kit, Terminal Assortment Kit for Cars
Asin: B0BYNTJ5NW | Model: Pissente734g1du62q | PartNumber: Pissente734g1du62q
Easy To Install: Easy To Install And Replace, Small Size And Light Weight, The Black And Red Help Distinguish Positive And Negative Terminal. No Extra Parts Are Needed, You Can Easily Install This Portable Terminal Connectors, Save Your Time And Energy..
Package Include: This Package Includes A Car Battery Terminal Clamp Set, Works Perfectly In Reducing Voltage Distortion And Transmission Loss, Please Notice The Fitment Before Purchase..
Wide Applications: The Battery Terminal Tool Has A Wide Range Of Applications, Allows For Flexible Application On Cars, Trucks, Caravans, Rvs, Truck Batteries And So On, Practical And Reliable..
Quick Release Design: Quick Release Design Enables Convenient Connect And Disconnect, Which Ensures Firm Fixing And Easy Wiring As Well, Battery Terminal Clamp Connectors Can Give You A Good Using Experience..
Features
- DURABLE: Automotive replacement battery accessories adopts copper and aluminium alloy materials, which has excellent electrical conductivity and resistance, durable, stable and sturdy, can be used for a long time.
- QUICK RELEASE DESIGN: Quick release design enables convenient connect and disconnect, which ensures firm fixing and easy wiring as well, battery terminal clamp connectors can give you a good using experience.
- EASY TO INSTALL: Easy to install and replace, small size and light weight, the black and red help distinguish positive and negative terminal. No extra parts are needed, you can easily install this portable terminal connectors, save your time and energy.
- WIDE APPLICATIONS: The battery terminal tool has a wide range of applications, allows for flexible application on cars, trucks, caravans, RVs, truck batteries and so on, practical and reliable.
- PACKAGE INCLUDE: This package includes a car battery terminal clamp set, works perfectly in reducing voltage distortion and transmission loss, please notice the fitment before purchase.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon #30
Front Tow Hook, Front Tractive Tow Hook 57805FJ000 Heavy Duty Steel Rear Bumper Trailer Ring Eye Towing Tow Hook Screw Replacement for Subaru Impreza Forester BRZ
Asin: B0C4VZ3FCT | Model: Pissentepyq7138uri | PartNumber: Pissentepyq7138uri
Sturdy And Durable: The Tow Hook Is Usually Made Of Heavy Duty Steel With Strong Load Bearing Capacity And Durability To Ensure Its Long And Stable Use..
Oe Number: Front Tractive Tow Hook With Reference Part Number Of 57805Fj000, 57805Fg000, 57805 Fg000, Please Double Check The Part Number Of Your Item Before Ordering..
Fitment: Replacement For Subaru Brz 2013‑2017; Replacement For Subaru 2009‑2018; Replacement For Subaru Impreza Wrx 2008‑2018; Replacement For Subaru Impreza Wrx Sti 2008‑2018..
Ideal Replacement: Direct Replacement Installation, Original Style, Meets Or Exceeds Oem Standards For The Replacement Of Old And Damaged Trailer Hitch Hooks On Original Vehicles..
Features
- EASY TO INSTALL: Designed and made in strict accordance with the original car size, perfectly fit with your car, easy to install and remove.
- IDEAL REPLACEMENT: Direct replacement installation, original style, meets or exceeds OEM standards for the replacement of old and damaged trailer hitch hooks on original vehicles.
- STURDY AND DURABLE: The tow hook is usually made of heavy duty steel with strong load bearing capacity and durability to ensure its long and stable use.
- FITMENT: Replacement for Subaru BRZ 2013 2017; Replacement for Subaru 2009 2018; Replacement for Subaru Impreza WRX 2008 2018; Replacement for Subaru Impreza WRX STI 2008 2018.
- OE NUMBER: Front tractive tow hook with reference part number of 57805FJ000, 57805FG000, 57805 FG000, please double check the part number of your item before ordering.
- See more on Amazon...
Brand: Pissente | Manufacturer: Pissente
See On Amazon