RED WOLF - Buying Guide

Bestselling from RED WOLF on Amazon

1. RED WOLF Wire Harness Cloth Electrical Tape for Automotive Engine Harnesses Protection Noise Damping...
2. RED WOLF 250A Circuit Breaker Fuse Holder 12V- 48V DC Manual Reset Switch Waterproof for Boat Trolli...
3. RED WOLF 30A Circuit Breaker DC 12-48V W/Manual Reset Manual Reset for Car Audio RV Marine Boat Truc...
4. RED WOLF Adjust DC 12V to 3.3V 5V 6V 9V DC Step Down Converter Power Supply Voltage Adapter Reducer ...
5. RED WOLF BS6300 300A Amp Circuit Breaker W/Manual Reset DC 12-48V High Amperage for Car Audio RV Mar...
6. RED WOLF 10 Pack 8 Gauge x 3/8" Copper Wire Ring Terminals Connector Lug Battery Cable Ends Stud W/3...
7. RED WOLF 1/4 x 10FT Cable Sleeves Cord Management Braided Wire Loom Sleeving Protector Wiring Cable...
8. RED WOLF 10 Rolls 3/4 Inch x 50 FT Wiring Harness Tape High Temp Flame Retardant Wire Cable Self-Adh...
9. RED WOLF 4 AWG 5/16"(M8) 20PCS Wire Lugs Ring Terminal Connectors Ends, 4 Gauge Battery Cable Copper...
10. RED WOLF 20 PCS 3/8-16 x 1" Button Head Socket Cap Screw Bolt w/Allen Hex Drive 18-8 304 Stainless S...

Features

• WIDELY APPLICATION: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing. It can also sort out home appliance wiring and more.
• SAFE MATERIAL: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive. High viscosity, high temperature resistance ( -40 F ~ 221 F ), well seal and excellent flexibility.
• EASY TO TEAR: Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need other tools. You can decide the length of the wire cloth tape according to you needs.
• NICE PERFORMANCE: The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance. It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection.
• SPECIFICATION: A set of 3 rolls wire harness cloth tap. SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide. It is work for your different daily needs in diversified use scenarios.
• See more on Amazon...

Features

• RED WOLF 250A Circuit Breaker w/Manual Reset: Visible reset lever shows open condition, unique push button reset Can also be used as a kill switch. Button on circuit breaker can act as a master disconnect for circuits.
• Breaker fuse holder protect your system: Suitable for a wide range of DC system voltages from 12V to 48V. Designed to protect the system from over-current as a result of high power draw, short-circuits, wiring mistakes, equipment faults or any other high current event. With mount cover protective the stud to be isolated, splash and dust proof.
• Premium material: The screw inside is made of pure copper. Housing made from thermal plastic UL rated 94V0. It is also water resistant (IP67 rated). Use the waterproof cover to better prevent rust from metal parts.
• Easy to use. 250 amp breaker circuit DC 12V-48V used in place of an inline fuse holder. The circuit breaker can be mounted on panel or firewall.
• Application: It used in auxiliary and accessory circuits for fit to Boat Marine RV Yacht Battery Trailer Bus Truck ATV Winches applications. Also can be used in battery charges and DC sound amplifier system.
• See more on Amazon...

Features

• 30 ampere automatic circuit breaker w/Manual Reset: Visible reset lever shows open condition, unique push button reset Can also be used as a kill switch. Button on circuit breaker can act as a master disconnect for circuits.
• 30a circuit breaker can protect your trolling motor from electrical damage, prevent excessive current and stops power surges from damaging Amps. Suitable for a wide range of DC system voltages from 12V to 48V. Designed to protect the system from over-current as a result of high power draw, short-circuits, wiring mistakes, equipment faults or any other high current event.
• Professional material: The screw inside is made of pure copper, Housing made from thermal plastic UL rated 94V0.
• Easy to operate. 30 amp DC 12V-48V car audio inline breaker circuit fuse. It used in place of an inline fuse holder. The circuit breaker can be mounted on panel or firewall.
• Application: It's used in auxiliary and accessory circuits for fit to Boat Marine RV Yacht Battery Trailer Bus Truck ATV Winches applications. It also can be used in battery charges and DC sound amplifier system.
• See more on Amazon...

Features

• RED WOLF voltage step down switcher harness work as input 12V-14V. Output voltage according to your automotive equipment requirements. Won't work for wider voltage. **NOTE: DO NOT WORK AS A BYPASS**
• The DC-DC converter wiring harness is widely used in vehicles electronic systems. Such as power factory camera or to Remove Popping noise for car when install aftermarket radio stereo, Install dash cam, CB or power other car Accessories Devices.
• A total of 4 output voltages are provided. There are three voltage slots, representing a 3.3V 5V 6V 9V power supply. It can switch to the voltage output you want.
• RED WOLF 12V to 3.3V 5V 6V 9V step down converter made of professional electrical level copper wire materials, Strong conductivity. Prevent Car equipment from damage due to over voltage, Short-circuit.
• Easy installation. Only 4 wires need to be connected. Wiring diagram is included in the package. Input voltage range DC12V-DC14V. Output DC 12V to 3.3V, DC12V to 5V, DC12V to 6V, 12V to 9V.
• See more on Amazon...

Features

• 300 amperage automatic circuit breaker w/Manual Reset: Visible reset lever shows open condition, unique push button reset Can also be used as a kill switch. Button on circuit breaker can act as a master disconnect for circuits.
• 300a circuit breaker can protect your trolling motor from electrical damage, prevent excessive current and stops power surges from damaging Amps. Suitable for a wide range of DC system voltages from 12V to 48V. Designed to protect the system from over-current as a result of high power draw, short-circuits, wiring mistakes, equipment faults or any other high current event. With mount cover protective the stud to be isolated, splash & dust proof.
• Professional material: The screw inside is made of pure copper, Housing made from thermal plastic UL rated 94V0.
• Easy to operate. RED WOLF BS6300 circuit breaker 300 amp DC 12V-48V easy to use. The circuit breaker can be mounted on panel or firewall.
• Application: It is used in auxiliary and accessory circuits for fit to Boat Marine RV Yacht Battery Trailer Bus Truck ATV Winches applications. It can be used in battery charges and DC sound amplifier system.
• See more on Amazon...

Features

• WHAT YOU GET: 10 PCS per pack of 8 AWG 3/8" wire lugs copper cable lugs, with 10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• PROFESSIONAL QUALITY MADE: RED WOLF battery cable ends are adopted for bare annealed copper material with a special treatment surface for corrosion protection. Solid & heavy duty copper lugs get a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• WIDELY USEAGE: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• EASY INSTALLATION: RED WOLF all of copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• RELIABLE&SAFE: These ring wire terminal copper not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components, batteries, and cables. Meanwhile, heat shrink tube will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• SPECIFICATION: Inner diameter 1/4 inch. Length 10 Feet. Operation temperature: -50 C ~ 150 C. Flame retardant: UL94-V0. ROHS certification.
• PROTECT CABLE CORD: Braided wire cable sleeving is made of PET polyester material. Prevent pets from scratching wire cable harness. Cut and heat-resistant wrap. Anti-stretch, anti-friction, fire-resistant, flexible, not easy to be affected by cleaning product or others.
• Split design allows cables to branch out from anywhere. It can be cut to any desired length. Make cables look professional and eliminates clutter. Open the cable covers and put in the wires, and the self-wrap cable sheath will close on itself.
• PREMIUM MATERIAL: Wire harness loom sleeve is high quality made, braided PET polyester material is quite DURABLE and of substantial thickness. Great closure is secure and the loom material is smooth and has a professional finished appearance.
• WIDE APPLICATION: Braided cable sleeve can be used in a wide range of applications in automotive, electronic, computer and marine industries and can also be used around the home and office for keeping your computer, TV, and home entertainment cables tidy.
• See more on Amazon...

Features

• : A set of 10 rolls wire harness cloth tap. Meet your needs. SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide. It is work for your different daily needs in diversified use scenarios.
• : It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive. High viscosity, high temperature resistance ( -40 F ~ 221 F ), well seal and excellent flexibility.
• : The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance. It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection.
• : The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing. It can also sort out home appliance wiring and more.
• : Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need scissors and other tools. You can decide the length of the wire cloth tape according to you needs.
• See more on Amazon...

Features

• Specification: 20pcs x 4 gauge AWG - 5/16 inch wire copper ring terminals connector w/20 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (10 black and 10 red) for meeting your different needs. NOTE: Before ordering please check the product dimensions to ensure a proper fit for the connectors.
• Wide Application: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• Reliable: These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.
• High Grade Quality: 4 gauge x 5/16 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Heat Shrink tubing: 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 457 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Easy to Use: RED WOLF all of 4 gauge M8 copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• See more on Amazon...

Features

• Specification: button head socket cap screw thread diameter 3/8", thread pitch: 1/16"; Screw Length: 1". Thread Coverage: full thread.
• High grade quality: Hex button socket cap screws are made of (18-8)304 stainless steel which is heat-resistant grade and anti-rust. With sturdy construction and good formability, 304 stainless steel can be readily welded by all common methods. And stylish sliver color make them good for both functional and aesthetic purposes.
• 304 stainless steel hex head socket screw offers good corrosion resistance and reliability to many automobile industrial application. It is suitable for furniture assembly indoor and outdoor use.
• Easy to Install: No special tools required. To use these button head socket cap screw, simply align the screw with the intended hole and fasten it using a hex key wrench.
• Package included: 20 x 3/8-16 1 inch thread button head socket screws w/hex allen drive.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 60A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 6 gauge AWG - 1/4 inch 10 pcs wire copper ring terminals connector w/10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Specification: 20pcs x 8 gauge AWG - 5/16 inch wire copper ring terminals connector w/20pieces of 3:1 ratio dual wall adhesive heat shrink tubing (10 black and 10 red) for meeting your different needs. NOTE: Before ordering please check the product dimensions to ensure a proper fit for the connectors.
• Application: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• Reliable Use: These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.
• Professional Quality: 8 gauge x 5/16 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Heat Shrink tubing: 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 457 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Easy to Use: RED WOLF all of 8 gauge copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• See more on Amazon...

Features

• What you get: 20pcs x 6 gauge AWG - 5/16 inch wire copper ring terminals connector w/20pieces of 3:1 ratio dual wall adhesive heat shrink tubing (10 black and 10 red) for meeting your different needs. NOTE: Before ordering please check the product dimensions to ensure a proper fit for the connectors.
• Wide Application: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• Reliable Use: These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.
• High Grade Quality: 6 gauge x 5/16 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Heat Shrink tubing: 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 457 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Easy to Use: RED WOLF all of 6 gauge copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• See more on Amazon...

Features

• What you get: 20pcs x 6 gauge AWG - 3/8 inch wire copper ring terminals connector w/20pieces of 3:1 ratio dual wall adhesive heat shrink tubing (10 black and 10 red) for meeting your different needs. NOTE: Before ordering please check the product dimensions to ensure a proper fit for the connectors.
• Wide Application: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• Reliable Use: These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.
• High Grade Quality: 6 gauge x 3/8 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Heat Shrink tubing: 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 457 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Easy to Use: RED WOLF all of 6 gauge copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• See more on Amazon...

Features

• Specification: 16pcs x 2 gauge AWG - 5/16 inch wire copper ring terminals connector w/16 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (8 black and 8 red) for meeting your different needs. NOTE: Before ordering please check the product dimensions to ensure a proper fit for the connectors.
• Wide Application: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• Reliable: These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.
• High Grade Quality: 2 gauge x 5/16 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Heat Shrink tubing: 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Easy to Use: RED WOLF all of 2 gauge M8 copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• See more on Amazon...

Features

• Specification: 16PCS X 2 gauge AWG - 3/8 inch wire copper ring terminals connector w/16 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (8 black and 8 red) for meeting your different needs. NOTE: Before ordering please check the product dimensions to ensure a proper fit for the connectors.
• Wide Application: Wire lugs ring terminal connectors meet USA American standard copper wire connectors. It is suitable for emergent cable repairing and replacing OEM battery terminals. Battery ring terminal ends are a joint connector from wiring cable to automotive electrical engine equipment solar panel system, golf carts, power inverter, RV's, marine, home appliances and DIY electrical wiring that vitals for stable installation, effectively preventing poor contact and short circuit.
• Reliable: These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation; high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency.
• High Grade Quality: 2 gauge x 3/8 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Heat Shrink tubing: 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Easy to Use: RED WOLF all of 2 gauge M10 copper ring terminals are marked a specification indication to help you conveniently and easily to locate the correct terminal. And battery cable lugs are high standard flared opening for easy wire insertion.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 60A; Voltage DC 24V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 6 gauge AWG - 1/4 inch 10 pcs wire copper ring terminals connector w/10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 80A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 20PCS X 6 gauge AWG - 1/4 inch wire copper ring terminals connector w/20 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (10 black and 10 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 50A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 6 gauge AWG - 1/4 inch 10 pcs wire copper ring terminals connector w/10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 30A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 6 gauge AWG - 1/4 inch 10 pcs wire copper ring terminals connector w/10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 200A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 6 gauge AWG - 1/4 inch 10 pcs wire copper ring terminals connector w/10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 300A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 6 gauge AWG - 1/4 inch 10 pcs wire copper ring terminals connector w/10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 300A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Package included: 16 PCS 1/0 gauge (AWG) 5/16 battery cable ends lug with 16 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (8 black and 8 red) to satisfy your different needs.
• Reliable and safe: battery ring wire terminal copper 1/0 AWG-5/16 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. Heat shrink tube definitely waterproof. It will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• Advanced materials: 1/0 AWG x 5/16 stub ring terminals connectors are made of annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, waterproof shrink temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 300A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Complete Package: 20PCS X 6 gauge AWG - 1/4 inch wire copper ring terminals connector w/20 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (10 black and 10 red) for meeting your different needs.
• Professional Material: 6 gauge x 1/4 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• Reliable Use: Battery ring wire terminal copper 6 AWG-1/4 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 1/3 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 300A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• COMPLETELY KIT: 6 PCS per pack of 1/0 gauge (AWG) 3/8 and 1/0 gauge (AWG) 5/16 wire lugs copper cable lugs, with 12 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (6 black and 6 red) for meeting your different needs.
• RELIABLE&SAFE: These ring wire terminal copper not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components, batteries, and cables. Meanwhile, heat shrink tube will shrink up to 3:1 of the original diameter of its.
• PROFESSIONAL QUALITY MADE: RED WOLF battery cable ends are adopted for bare annealed copper material with a special treatment surface for corrosion protection. Solid & heavy duty copper lugs get a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 200A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• COMPLETE PACKAGE: 10 X 4 gauge AWG - 3/8 inch wire copper ring terminals connector w/10 10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• PROFESSIONAL MATERIAL DESIGNED: 4 gauge x 3/8 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, heat shrink tube temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• RELIABLE USE: Battery ring wire terminal copper 4 AWG-3/8 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 300A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• What you get: 16 PCS 1/0 gauge (AWG) 3/8 battery cable ends lug with 16 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (8 black and 8 red) for meeting your different needs.
• Advanced materials: 1/0 AWG x 3/8 inch copper wire connectors terminals are made of annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Reliable and safe: battery ring wire terminal copper 1/0 AWG-3/8 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 200A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Package included: 16 PCS 1/0 gauge (AWG) 5/16 battery cable ends lug with 16 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (8 black and 8 red) to satisfy your different needs.
• Reliable and safe: battery ring wire terminal copper 1/0 AWG-5/16 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. Heat shrink tube definitely waterproof. It will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• Advanced materials: 1/0 AWG x 5/16 stub ring terminals connectors are made of annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, waterproof shrink temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 200A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• What you get: 16 PCS 1/0 gauge (AWG) 3/8 battery cable ends lug with 16 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (8 black and 8 red) for meeting your different needs.
• Advanced materials: 1/0 AWG x 3/8 inch copper wire connectors terminals are made of annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow.
• Reliable and safe: battery ring wire terminal copper 1/0 AWG-3/8 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...

Features

• Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• Use the waterproof cover to better prevent rust from metal parts. Max current 300A; Voltage DC 48V. Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
• COMPLETE PACKAGE: 10 X 4 gauge AWG - 3/8 inch wire copper ring terminals connector w/10 10 pieces of 3:1 ratio dual wall adhesive heat shrink tubing (5 black and 5 red) for meeting your different needs.
• PROFESSIONAL MATERIAL DESIGNED: 4 gauge x 3/8 inch battery cable ends are made of 99.99% annealed copper material with a special treatment surface for corrosion protection. Durable and heavy duty copper lugs have a good transfer of electric in battery and achieve maximum current flow. 3:1 ratio heat shrink tube is polyolefin material made, which is non-toxic, heat shrink tube temperature up to 257 F and flame-retardant, ensuring secure use, strong crimp and adherent.
• RELIABLE USE: Battery ring wire terminal copper 4 AWG-3/8 not only have a heavy duty structure but also closed end pad design that enhances high-temperature durability and maintain the security of electrical components. It will shrink up to 3:1 of the original diameter of its original diameter when heated and forms a tight seal that is more resistant to stretching and vibration and higher tensile strength than normal heat shrink tubing.
• See more on Amazon...