STEBER - Buying Guide
Last Updated: 04/30/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
3/8 Fuel Line Tubing Mounting Clamps Stainless Steel Cable Clamp Hardware Rubber Cushioned Insulated Metal Clamp Tube Holder for Tube Pipe or Wire Cord Installation Pack of 10 pcs
Asin: B07RMJQNMD
High Quality Stainless Steel Construction, Epdm Rubber Insulation.
These Mounting Clips Are Made From High Quality Stainless Steel So You Can Be Assured That They Will Not Rust Or Corrode.
Universal Application To Mount 3/8 Inch Tubing.
The Eastwood 3/8 Inch Fuel Line Mounting Hardware Kit Will Allow You To Complete Your Brake Line Project With Perfect Professional Results..
Features
- Cable clamp screw hole diameter: 6.5mm, fit for 6mm ( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 3/8 inch. Fit for 3/8 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application.
- The Eastwood 3/8 Inch Fuel Line Mounting Hardware Kit Will Allow You To Complete Your Brake Line Project With Perfect Professional Results.
- High Quality Stainless Steel Construction, Epdm Rubber Insulation
- Universal Application To Mount 3/8 Inch Tubing
- These Mounting Clips Are Made From High Quality Stainless Steel So You Can Be Assured That They Will Not Rust Or Corrode
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #2
3/8 ID Heat Shielded Fire Thermo Armor Fire Sleeve Silicone Coated Fiberglass for Hose Lines & Electrical Wiring Black, 5 feet
Asin: B08FDBYJ7W | Model: BSFG-10-5 | PartNumber: BSFG-10-5
Operating Temp: -60 C Degree - 260 C Degree, Flammability: Vw-1, Inner Sleeve: Fiberglass, Coating Material: Silicone.
Used To Protect Fuel Lines, Hydraulic And Oil Lines From Heat And To Prolong The Life Of Wiring And Hoses In Case Of Fire So That Critical Systems Can Function Longer In The Aviation And Marine Fields.
Silicone Layer Can Be Cleaned And Protects Against Abrasion, Burn Protection During Under Hood Repairs And Maintenance, Helps To Prevent Vapor Lock, Protects Wires From Melting.
Made Of Standards Silicone Rubber Coated Fiberglass Sleeve.
Features
- ID: 3/8", Length: 5 feet, heat shield fire sleeve
- Made of standards silicone rubber coated fiberglass sleeve
- Operating Temp: -60 C degree - 260 C degree, Flammability: VW-1, Inner Sleeve: Fiberglass, Coating Material: Silicone
- Silicone layer can be cleaned and protects against abrasion, Burn protection during under hood repairs and maintenance, Helps to prevent vapor lock, protects wires from melting
- Used to protect fuel lines, hydraulic and oil lines from heat and to prolong the life of wiring and hoses in case of fire so that critical systems can function longer in the aviation and marine fields
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Warranty: 1 month
See On Amazon #3
Fuel Line 3/8 ID NBR 6 AN Push on Hose 5/8 OD 300 PSI Working Pressure for Small Engines, 15 feet
Asin: B07SCNM85M
Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles Temperature Ranges Of -40 To +275 Degrees F.
The Fuel Lines Are Oil Resistant,Cold-Resistant And Ethanol Tolerance.
Designed For Conveying Gasoline, E-85, Diesel, And Bio-Diesel Fuels In Cars, Trucks, Buses, Etc.
Use Hose Barbs And Clamps, Transfer Of Petroleum Products Fuel Lines For Small Engines.
Features
- ID: 3/8 inch, OD: 5/8 inch, 6 AN NBR liner hose oil engine liner, 15 FT length
- Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
- Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to +275 degrees F
- Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc
- The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 1.00 x 8.00 x 2.00 inches
See On Amazon #4
Oil Pressure Sensor Tee Adapter M12 x 1.5 to 1/8 NPT Port Turbo Supply Feed Line Gauge M12x1.5 Female to M12x1.5 Male with 1/8 NPT Side Port Hose T Stainless Steel
Asin: B08DG6YQM1 | Model: BPT-18M1215-SS | PartNumber: BPT-18M1215-SS
M12 X 1.5 Mm Female To M12 X 1.5 Mm Male Metric Thread With 1/8'' Npt Female Side Port Hose Tee Fittings.
Easy Installation Of Oil Pressure And/Or Oil Temperature Sensors.
Made Of Stainless Steel 304 Metarial.
Features
- Overall Length: 50mm / 2.0", Body Length 1.5", Outside Hex Width: 3/4" End
- Made of stainless steel 304 metarial
- M12 x 1.5 mm female to M12 x 1.5 mm male metric thread with 1/8'' NPT female side port hose tee fittings
- Easy Installation of Oil Pressure and/or Oil Temperature Sensors
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #5
Silicone Vacuum Hose Line Universal Black, 1/2 (13mm) ID, 21mm-OD 5 Feet High Temperature 60 psi Max Pressure 5/32" Wall Thickness
Asin: B09VPKYC5G | Model: BSVM-13-5-bk | PartNumber: BSVM-13-5-bk
Made Of Premium Silicone Material To Ensure Strength And Durability.
Heavy Wall Design Gives It The Ability To Handle Extreme Pressure.
It Applies To General Purpose Air Or Water Transportation In The Engine Bay.
Max Temperature: 260 C/ 500 F, Reinforcement Construction, 60 Psi Maximum Pressure Rating.
Features
- Silicone Vacuum Tubing: 13mm (1/2 Inch) ID, 21mm OD, 4mm wall thickness 5 feet roll length
- Max temperature: 260 C/ 500 F, reinforcement construction, 60 PSI Maximum pressure rating
- Made of premium silicone material to ensure strength and durability
- It applies to general purpose air or water transportation in the engine bay
- Heavy wall design gives it the ability to handle extreme pressure
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #6
Stainless Steel Banjo Bolts M10x1.0 Brake Fitting Adapter Universal with M10 Copper Washers, Single Banjo Bolt M10x1 Metric Thread
Asin: B07V83QGBY | Model: BKRB1010-SS | PartNumber: BKRB1010-SS
Works With Banjo Eye Inter Diameter 10.2Mm.
Each Component Is Precision-Machined To Exact Tolerances For Trouble-Free Performance.
M10*1.0 Sus 304 Banjo Bolts Fitting.
Material: 304 Stainless Steel, Overall Length: 24Mm.
Features
- M10x1.0mm thread hexagon head with 2 pcs of M10 copper spacer
- Material: 304 Stainless Steel, Overall Length: 24mm
- Works with Banjo Eye Inter Diameter 10.2mm
- M10*1.0 SUS 304 banjo bolts fitting
- Each component is precision-machined to exact tolerances for trouble-free performance
- See more on Amazon...
Brand: STEBER | Manufacturer: steber
See On Amazon #7
Nylon Tubing Fuel Line 1/4 ID Tube Pneumatic Hose 5/16 OD Black 10 feet
Asin: B07QDJ1XRP | Model: BNY6OD8-10 | PartNumber: BNY6OD8-10
Abrasion Resistant, Flexible, Chemical Resistance, High Pressure, Lightweight.
Easily Fits Into The Fuel Fitting Or Fuel Barb, Plastic Tubing Is Used To Transfer Liquids, Air, Water Or Solids, And It Is Characterized By A Round, Rectangular, Or Square Shape And A Hollow Center.
Material Polyamide (Nylon), Thickness 1Mm Bending Radius 50Mm.
Working Pressure 3Mpa. Burst Pressure 7.3Mpa.
Features
- 1/4 inch hose ID, 5/16 inch hose OD, 10 feet length, black
- Working Pressure 3Mpa. Burst Pressure 7.3Mpa
- Abrasion resistant, flexible, chemical resistance, high pressure, lightweight
- Material Polyamide (Nylon), Thickness 1mm Bending radius 50mm
- Easily fits into the fuel fitting or fuel barb, Plastic tubing is used to transfer liquids, air, water or solids, and it is characterized by a round, rectangular, or square shape and a hollow center
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #8
4AN Y Adapters Male Flare Fuel Line Hose Fitting Block Tee Pipe Aluminum Adapter 4 AN to AN 4 to AN4 Male Thread Black
Asin: B0BRC8R96M | Model: BY2-444-bk | PartNumber: BY2-444-bk
Y Adaptor Blocks Eliminate The Need For Additional Fittings.
Hard-Anodized Coating Is Compatible With Alcohol, Exotic Fuel-Additives, Water And Oil.
Cnc-Machined, Billet Aluminum Y-Blocks Feature A/N Style Male Inlets And Outlets.
This Eliminates Leaks Due To Poor Solder Joints Or Leaky O-Rings Due To Cnc Manufacturing Process.
Features
- AN male flare to 4AN flare to 4AN male flare Y block coupling adapters fuel line connector
- This eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process
- Y adaptor blocks eliminate the need for additional fittings
- CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets
- Hard-anodized coating is compatible with alcohol, exotic fuel-additives, water and oil
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #9
M18x1.5 Metric to 3/8 Hose Barb Aluminum Adapter Male M18-1.5 Male to 3/8" Fuel Oil Pump Inlet Fitting Black
Asin: B0BZKYL7HW | Model: Thread | PartNumber: Thread
Black Anodized, Precision Machined To Ensure Precise Thread Engagement.
Allows You To Close (Cap) The End Of A Line; Provides A Clean, Finished Look.
Reusable High Performance Npt Thread Tube Hose Fitting Adaptors.
Made From Lightweight 6061-T6 Cnc Machined Billet Aluminum Alloy.
Features
- M18 * 1.5 mm metric thread male to 3/8 inch barb hose connector with m18 AL spacer
- Made from lightweight 6061-t6 cnc machined billet aluminum alloy
- Black anodized, Precision machined to ensure precise thread engagement
- Reusable high performance npt thread tube hose fitting adaptors
- Allows you to close (cap) the end of a line; provides a clean, finished look
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 0.50 x 2.50 x 0.50 Inches
See On Amazon #10
Fuel Line Quick Connector for 5/16" Steel to 1/4 ID 5/16 OD Nylon Tubing, Pack of 2
Asin: B07QFLWMWS | Model: BNY789ID6-0-P2 | PartNumber: BNY789ID6-0-P2
Fitting Attachment End 1: Quick Disconnect, Fit 5/16" Steel Fitting.
Material: Nylon.
Fitting Attachment End 2: Barb, Fit For 1/4" Id 5/16" Od Nylon Line.
Quick Disconnect / Connect Fuel Line Connectors, Retainers & Repair Kit.
Features
- Fit for 5/16 inch steel to 1/4 inch ID & 5/16 OD nylon hose
- Quick disconnect / connect fuel line connectors, retainers & repair kit
- Fitting Attachment End 1: Quick Disconnect, fit 5/16 steel fitting
- Fitting Attachment End 2: Barb, fit for 1/4 ID 5/16 OD nylon line
- Material: nylon
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Weight: 0.00 pounds
See On Amazon #11
Universal Car Rear Spoiler Exterior 4.9ft/1.5m Length Black Trunk Spoiler Lip Kit Rear Spoiler Kit Universal Fits for Most Cars Punch-Free Installation
Asin: B08LQTDS6P | Model: BRURE15035-bk | PartNumber: BRURE15035-bk
High-Quality Carbon Fiber Clear And Bright Surface, Soft Rubber Material Can Be Bent Freely Adjustable Curvature 3D Carbon Fiber Rubber Stereo Effect Strong Sport Wind Vision.
Highly Flexible And Environmentally Friendly Fiber Materials Are Bendable, Durable And Durable, High-Quality Adhesive Design, It Does Not Fall Off, Easy To Install..
Fit According To The Model's Curvature, Any Bending, Free Cutting, Matching Finishing,Free Fit, High Degree Of Fit And Easy Installation, Non-Destructive Installation.
Fixed Double-Sided Tape On The Back, Car Universal Front Spoiler/Roof Wing, Rear Spoiler 3D Carbon Fiber Visual.
Features
- 4.9 Feet (150cm/1.5m) Length, 1.37 inch width. Please refer to the photo shown
- Fixed Double-sided Tape On The Back, car Universal Front Spoiler/roof Wing, Rear Spoiler 3d Carbon Fiber Visual
- High-quality carbon fiber clear and bright surface, Soft rubber material can be bent freely Adjustable curvature 3D carbon fiber rubber stereo effect strong Sport wind vision
- Fit according to the model's curvature, Any bending, free cutting, matching finishing,Free fit, high degree of fit and easy installation, non-destructive installation
- Highly flexible and environmentally friendly fiber materials are bendable, Durable and durable, High-quality adhesive design, It does not fall off, Easy to install.
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 2.00 x 5.00 x 2.00 inches
Warranty: No
See On Amazon #12
Universal Exhaust Muffler Hanger Bushing, 4 Holes, 12mm (0.47") Hole Size, fits for Mitsubishi Lancer EVO 7 8 9 Colt Ralliart Ver. R - Black
Asin: B07YBFYRPM | Model: BEH4B-bk | PartNumber: BEH4B-bk
The Hanger Is 50% Stiffer Over Original, Will Reduce Exhaust Vibration Clunk Or Prevent The Exhaust Tip From Touching Vehicle's Rear Bumper.
Make The Exhaust Hanger Insulator Anti-Abrasive, Anti High Temperature And Not Easy Damage.
Made Of Strong Polyurethane Epdm Rubber Material And Will Not Easily Crack..
Replaces The Original Worn Out Bushing To Prevent Exhaust System From Flopping While Driving.
Features
- Fitment fits for Mitsubishi Lancer EVO 7 8 9 Colt Ralliart Ver. R
- Replaces the original worn out bushing to prevent exhaust system from flopping while driving
- The hanger is 50% stiffer over original, will reduce exhaust vibration clunk or prevent the exhaust tip from touching vehicle's rear bumper
- Made of strong Polyurethane EPDM rubber material and will not easily crack.
- Make the exhaust hanger insulator anti-abrasive, anti high temperature and not easy damage
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #13
6AN Rollover Valve Aluminum Fuel Cell Tank Mounted Hose Line Fitting Black AN6 Tip Roll Over Valves
Asin: B0859FZGGB | Model: AN | PartNumber: AN
Tight, Leak-Free Connections And Then Black Anodized For Durability.
Allow For The Connection Of Hose Ends To Other Components Like Oil Pumps, Fuel Pumps And Fuel Filter.
Precision Machined To Exacting Tolerances For Trouble-Free, Ensure Accurate Thread Engagement.
Manufactured From Lightweight 6061-T6 Cnc Machined Billet Aluminum Alloy.
Features
- Black 6 an roll over valve aluminum adapters
- Manufactured from lightweight 6061-T6 cnc machined billet aluminum alloy
- Tight, leak-free connections and then black anodized for durability
- Precision machined to exacting tolerances for trouble-free, ensure accurate thread engagement
- Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 0.50 x 2.00 x 0.50 Inches
See On Amazon #14
6AN Flare to 3/8 Hose Barb Fuel Line Fitting Adapter Aluminum 6 AN Male to 3/8" Push-on Barbed Pipe Connector Black
Asin: B07TPT23S7 | Model: BAN815-B-638-bk | PartNumber: BAN815-B-638-bk
Made From Lightweight 6061-T6 Cnc Machined Billet Aluminum Alloy.
Designed For Leak Proof Sealing With Any Manufacturers Fittings.
Fit All Oil / Turbo Fuel Line / Rail Pump Injector Fitting.
Surface Treatment: Black Anodized Finish For Long Last, Durability And Strength.
Features
- JIC 6 AN, 9/16"-18 UNF Male Flare to 3/8 hose barb fuel fitting straight
- Surface treatment: black anodized finish for long last, durability and strength
- Made from Lightweight 6061-T6 CNC Machined Billet Aluminum Alloy
- Fit all Oil / Turbo Fuel Line / Rail Pump Injector Fitting
- Designed for leak proof sealing with any manufacturers fittings
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #15
Heat Shroud 1-1/2" ID 3.2 ft Aluminized Sleeving Lightweight Aluminum Fiberglass Insulated Shield Sleeve for 1-1/2 OD Braided Hoses, Fuel Lines, Cables or Electrical Wiring Ultimate Heat Protection
Asin: B08GX6W99H
Continuous Operating Reflective Temperature Of 1000 Degree Fahrenheit.
Designed To Provide Maximum Heat Reflectivity While Also Protecting From Chemical, Oil Leaks & Spills, Dirt, Road Grime And Other Underhood Hazards. Helps To Prevent Vapor Lock, Lower Air Intake Temperatures.
Trim To Desired Length, Pliable For Tight Bends, With Hook And Loop Closure.
Wrap Around Wires, Cables And Hoses For Extreme Heat Protection.
Features
- 3.2 Feet (1 meter) length fit for 1-1/2 inch OD hose. Tightly braided fibers aluminum fiberglass heat shield sleeve
- Wrap around wires, cables and hoses for extreme heat protection
- Continuous operating reflective temperature of 1000 degree Fahrenheit
- Trim to desired length, pliable for tight bends, with hook and loop closure
- Designed to provide maximum heat reflectivity while also protecting from chemical, oil leaks & spills, dirt, road grime and other underhood hazards. Helps to prevent vapor lock, lower air intake temperatures
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #16
6AN Fuel Cell Bulkhead Adapter Fitting 6 AN Locking Nut AN6 Male Flare Fast Flow Aluminum Black with 2 pcs Oil-resistant Washers
Asin: B07QRZK7CF
Each Component Is Cnc-Machined For Precision Fit And Unmatched Flow.
All Fittings Are Fully Compatible With Gasoline And Alcohol Based Fuels.
More Area And Smoother Transitions From The Inlet To The Outlet, Resulting In Less Restriction Than Any Other Fitting Line.
Constructed Of 6061 T6 Aircraft Grade Lightweight Aluminum Material.
Features
- JIC 6 AN fuel cell bulkhead fitting with an bulkhead lock nut and 2 pcs washers
- Constructed of 6061 T6 aircraft grade lightweight aluminum material
- Each component is CNC-machined for precision fit and unmatched flow
- More area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line
- All fittings are fully compatible with gasoline and alcohol based fuels
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #17
M12x1.5 to 1/8 NPT Aluminum Fitting Pressure Gauge Sensor Sender Thread Reducer Adapters Female M12 P1.5 to Male 1/8 NPT Blue
Asin: B07Z8VC2YY
Blue Anodized Finish For Long Last, Strength And Durability.
Aluminum Fitting Gauge Sensor Sender Thread Reducer Female M12 P1.5 To Male 1/8 Npt.
Material: Lightweight 6061-T6 Billet Aluminum Alloy.
Features
- M12*1.5mm to 1/8 inch npt oil pressure gauge sender adapter
- Material: lightweight 6061-T6 billet aluminum alloy
- Blue Anodized Finish for Long Last, Strength and Durability
- Aluminum Fitting Gauge Sensor Sender Thread Reducer Female M12 P1.5 to Male 1/8 NPT
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Weight: 0.00 pounds
See On Amazon #18
5/16 Fuel Check Valve Non-Return One Way Petrol Diesel Gas Oil Air Aluminum Alloy 8mm, Pack of 2
Asin: B07Z9J5Z7B
Easy Installation And Replacement.
Arrow Marked On Valve, Showing Fluid Flow Direction, Prevents Fuel From Returning Back To The Tank And Keeps It In The Line.
Professional Grade Non-Return Valve - Ideal For Marine, Automotive, Caravans/Rv, And Agriculture.
Material: Lightweight 6061-T6 Cnc Machined Aluminum Alloy.
Features
- 5/16" (8mm) fuel check valve, nonreturn, Pack of 2
- Material: lightweight 6061-T6 cnc machined aluminum alloy
- Easy installation and replacement
- Professional grade non-return valve - Ideal for marine, automotive, caravans/RV, and agriculture
- Arrow marked on valve, showing fluid flow direction, Prevents fuel from returning back to the tank and keeps it in the line
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #19
10AN Flare Male to 3/8 NPT Male Pipe Adapter Union Hose Fitting Aluminum Anodized Black Straight AN10-3/8
Asin: B07TD2JYXP | Model: BAN816-10-6D-bk | PartNumber: BAN816-10-6D-bk
Black Anodized, Precision Machined To Ensure Precise Thread Engagement.
Fitttings Assure Positive Sealing And Come In An Anodized Corrosion-Resistant Finish.
37 Degree Sealing Angle Guarantees A Positive Seal At Maximum Operating Pressures.
Made From Lightweight 6061-T6 Cnc Machined Billet Aluminum Alloy.
Features
- 10 AN male flare to 3/8" NPT National Pipe Taper male pipe connector straight
- Made from lightweight 6061-t6 cnc machined billet aluminum alloy
- Black anodized, Precision machined to ensure precise thread engagement
- 37 degree sealing angle guarantees a positive seal at maximum operating pressures
- Fitttings assure positive sealing and come in an anodized corrosion-resistant finish
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #20
6AN Female Swivel to 3/8 Hose Barb Aluminum Fuel Line Fitting AN6 to 3/8" Barbed Push On Adapters Straight Black Anodized
Asin: B07ZB27W8X
Tight, Leak-Free Connections And Then Black Anodized For Durability.
Allow For The Connection Of Hose Ends To Other Components Like Oil Pumps, Fuel Pumps And Fuel Filter.
Precision Machined To Exacting Tolerances For Trouble-Free, Ensure Accurate Thread Engagement.
Manufactured From Lightweight 6061-T6 Cnc Machined Billet Aluminum Alloy.
Features
- 6 an female thread (JIC-6, 9/16"-18) swivel to 3/8 hose barb tube connector, straight
- Manufactured from lightweight 6061-T6 cnc machined billet aluminum alloy
- Tight, leak-free connections and then black anodized for durability
- Precision machined to exacting tolerances for trouble-free, ensure accurate thread engagement
- Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Weight: 0.01 pounds
See On Amazon #21
8AN Female to 10AN Male Flare Hose Reducer Fuel Line Fitting Adapters Aluminum AN8-AN10 Reducing Pipe Connector Black
Asin: B0817TYGRB
Black Anodized, Precision Machined To Ensure Precise Thread Engagement.
Designed To Match With Common Performance Hose And Hose Ends.
Universal Fit. Such As: Oil/ Fuel/ Gas/ Water/ Fluid.
Made From Lightweight 6061-T6 Cnc Machined Billet Aluminum Alloy.
Features
- 8AN 3/4-16 Female to Male -10 AN 7/8''-14 Flare Reducing Tube Tubing Adaptor
- Made from lightweight 6061-t6 cnc machined billet aluminum alloy
- Black anodized, Precision machined to ensure precise thread engagement
- Universal fit. such as: Oil/ Fuel/ Gas/ Water/ Fluid
- Designed to match with common performance hose and hose ends
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #22
12 mm 0.47" ID Copper Crush Washers M12 x 1 Brake Hose Spacer Flat 16mm-OD 12mm-ID fit on 12mm Bolt Pack of 20
Asin: B07YX61SST | Model: BKCOM1216-1-P20 | PartNumber: BKCOM1216-1-P20
Often Used On Caliper Banjo Bolts And Fit For M12 Metric.
Great For Sump Plugs, Water, Fuel And Hydraulic Fittings.
Pack Of 20 Pcs.
M12 Copper Crush Washer / Spacer.
Features
- 12mm ID, 16mm (0.63") OD, 1mm (0.041") Thickness
- M12 Copper crush washer / spacer
- Often used on caliper banjo bolts and fit for m12 metric
- Pack of 20 pcs
- Great for sump plugs, water, fuel and hydraulic fittings
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #23
Exhaust Hanger Insulators Auto Parts Bushing Muffler Reduce Vibration Mount Bracket 12mm ID 2 Holes Vehicle's Hangers, Pack of 2
Asin: B07VJ9G5SJ
Made Of Strong Polyurethane Epdm Rubber Material And Will Not Easily Crack..
Connecting Part Between The Exhaust Pipe Bracket, Muffler, And The Chassis Hanger. Installed In The Hanging Exhausts Back Boxes And Exhaust Mount.
Perfect To Replace Your Old Or Broken Exhaust Mount. Better Secure The Exhaust And Reduce Vibration.
Compatible With Acura Legend Integra Honda Civic & More.
Features
- 12mm 0.47 inch diameter holes and 35mm center to center distance, 65mm Length, 54mm Width, 25mm Height
- Compatible with Acura Legend Integra Honda Civic & More
- Made of strong Polyurethane EPDM rubber material and will not easily crack.
- Perfect to replace your old or broken Exhaust Mount. Better secure the exhaust and reduce vibration
- Connecting part between the exhaust pipe bracket, muffler, and the chassis hanger. Installed in the hanging exhausts back boxes and exhaust mount
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #24
6AN Male Flare Tee Hose Fitting 6AN to 6AN 6AN Male Thread Coupling Aluminum Fuel Line Pipe Adapters Black Anodized
Asin: B07V5W4LGY | Model: BAN824-6-bk | PartNumber: BAN824-6-bk
Black Anodized Finish.
Male Flare 6 X 6 X 6 An Thread T Hose Fittings Tube Adaptor Universal Connectors.
Used To Connect Flexible Hoses And Rigid Metal Tubing That Carry Fluid, Fit All Oil / Turbo Fuel Line / Rail Pump Injector Fitting.
Material: Lightweight 6061-T6 Billet Aluminum Alloy.
Features
- JIC -6-6-6 AN (9/16-18) male flare pipe union, to Connect Three -6 AN Female Fittings Together
- Material: lightweight 6061-T6 billet aluminum alloy
- Black anodized finish
- used to connect flexible hoses and rigid metal tubing that carry fluid, Fit all Oil / Turbo Fuel Line / Rail Pump Injector Fitting
- Male Flare 6 x 6 x 6 AN thread T hose fittings tube adaptor universal connectors
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #25
4AN 90 Degree Female to Male Flare Swivel Hose Union Bulkhead Adapter Fittings Aluminum Black
Asin: B07QPSQY6B
Black Anodized, Precision Machined To Ensure Precise Thread Engagement.
All Billet Aluminum Fittings Are Anodized Type Ii Bright Dip Black For Corrosion Protection And Unrivaled Aesthetics.
Allow For The Connection Of Hose Ends To Other Components Like Oil Pumps, Fuel Pumps And Fuel Filter.
Material: High Grade Aircraft Lightweight 6061-T6 Billet Aluminum.
Features
- Size: AN4 male flare an to 4 AN female equal pipe union connector, 90 deg swivel elbow
- Material: High grade aircraft Lightweight 6061-T6 billet Aluminum
- Black anodized, Precision machined to ensure precise thread engagement
- Allow for the connection of hose ends to other components like oil pumps, fuel pumps and fuel filter
- All billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #26
3/8 Inline Barb Fuel Pressure Gauge Hose Adapter with 1/8" NPT Port Fitting Billet Aluminum Black
Asin: B081MQ986T
Made From Lightweight Aluminium And Tapped 1/8" Npt For Your Fuel Gauge.
Inlet & Outlet Hose Barb With Npt Pressure Gage Port.
Fuel Pressure Gauge Adaptors Are Ideal For Adding A Fuel Pressure Gauge To Your System.
Port: 1/8 Inch Npt Female Fuel Oil Pressure Gauge.
Features
- Barb size: 3/8 inch to 3/8 inch
- Port: 1/8 inch NPT female fuel oil pressure gauge
- Made from lightweight aluminium and tapped 1/8 NPT for your fuel gauge
- Fuel pressure gauge adaptors are ideal for adding a fuel pressure gauge to your system
- Inlet & outlet hose barb with npt pressure gage port
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Weight: 0.01 Pounds
See On Amazon #27
Aluminum Fuel Banjo Adapter Kit Set for Bosch 044 Fuel Pump - 6AN Male to 12mm Outlet Banjo Bolt Adapter Fitting and M12 x 1.5 Female Cap with M12 Copper Washers
Asin: B08F3B3CFP
Material: Lightweight 6061-T6 Billet Aluminium Structure.
Blue Anodized Finish.
Jic6, 9/16" X 18 Unf 6 An Thread Flare Banjo Fittings Set For Fuel Oil Pump / Tank With Copper Washers And Al Cap.
An6 Aluminum Banjo, Banjo Hole: 12.2Mm, 2 Pcs M12 Copper Washers And 1 Pc M12*1.5 Female Aluminum Cap.
Features
- Application: Design for Bosch 044 Fuel Pump
- AN6 aluminum banjo, banjo hole: 12.2mm, 2 pcs M12 copper washers and 1 pc M12*1.5 female aluminum cap
- Material: Lightweight 6061-T6 billet aluminium structure
- JIC6, 9/16 x 18 UNF 6 AN thread flare banjo fittings set for fuel oil pump / tank with copper washers and AL cap
- Blue anodized finish
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #28
8 AN Male to 3/8" SAE Quick Disconnect Male Push On EFI Fitting Adapter Aluminum Work for Fuel Rail Hose
Asin: B0BZL58PFF | Model: Thread | PartNumber: Thread
Manufactured From 6061-T6 Aluminum For Strength, Durability And Corrosion Resistance.
They Are Available In Various Configurations To Fit Oem Hard Lines Or Fuel Feed Outlet Of Efi Fuel Filter And Ensure A Positive Seal, Even At Maximum Operating Pressures.
An8 Male To 3/8 Male Push-On Efi Fittings Are Precision-Machined To Ensure Precise Thread Engagement.
These Quick Connect 3/8 Male To 8An Male Fuel Rail Fitting Adapters Are Designed To Fit Your Fuel Feed Outlet Of Efi Fuel Filter And Fuel Rails.
Features
- JIC -8 AN male thread (3/4" x 16) to 3/8" SAE Quick-Connect push-on hose EFI fitting adapters fuel rail connectors
- These quick connect 3/8 male to 8an male fuel rail fitting adapters are designed to fit your fuel feed outlet of EFI fuel filter and fuel rails
- Manufactured from 6061-T6 aluminum for strength, durability and corrosion resistance
- AN8 male to 3/8 male push-on EFI fittings are precision-machined to ensure precise thread engagement
- They are available in various configurations to fit OEM hard lines or fuel feed outlet of EFI fuel filter and ensure a positive seal, even at maximum operating pressures
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 0.50 x 2.00 x 0.50 Inches
See On Amazon #29
8AN Male to 3/8 SAE Quick Disconnect Female Push on EFI Fitting Adapters Aluminum AN8 Flare to 3/8 Female
Asin: B07R9P8Y8X | Model: BHVP02903-838-bk | PartNumber: BHVP02903-838-bk
Surface Treatment: Black Anodized Finish For Long Last, Durability And Strength.
All Fittings Are Fully Compatible With Gasoline And Alcohol Based Fuels.
Can Be Used For Most Automotive Needs, Such As: Fuel, Oil, Coolant, Air, And More.
Material: High Grade Aircraft Lightweight 6061-T6 Billet Aluminum.
Features
- 8 AN male flare to 3/8 quick disconnect female push on fuel fittings
- Material: High grade aircraft Lightweight 6061-T6 billet Aluminum
- Surface treatment: black anodized finish for long last, durability and strength
- Can be used for most automotive needs, such as: Fuel, Oil, Coolant, Air, and more
- All fittings are fully compatible with gasoline and alcohol based fuels
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
See On Amazon #30
Universal Front Bumper Lip Spoiler 8.2ft/250cm Length Carbon Fiber Rubber Side Skirt Cover Protector Lip Car Front Bumper Guard Strip Splitter Air Dam
Asin: B08LQMGWB3 | Model: BRUFR250-cf | PartNumber: BRUFR250-cf
Protect Your Vehicle From Curbs And Scrapes.
Bumper Spoiler Rubber Skirt, Anti-Scratch And Decorative.
Easy To Bend And Conform To The Shape Of The Bumper,Easy Installation And Good Adhesion.
Carbon Fiber Black, Front Lip Universal For Most Cars, Trucks, Suv With Easy To Use 2.5M Automotive Tape..
Features
- 8.2 FT (2.5m) Length and 55mm width. Please refer to the photo shown
- Carbon fiber black, front lip Universal for most cars, trucks, SUV with easy to use 2.5M automotive tape.
- Protect your vehicle from curbs and scrapes
- Easy to bend and conform to the shape of the bumper,Easy installation and good adhesion
- Bumper spoiler rubber skirt, anti-scratch and decorative
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 0.80 x 3.00 x 1.00 Inches
Warranty: No
See On Amazon