Savannah - Buying Guide

Bestselling from Savannah on Amazon

1. Savannah River Distribution Savannah River Replacement Dust Bags for Intervac and Dometic Model Y10-...
2. Peachtree Woodworking Supply Pro Grind Sharpening System for 6 Inch Grinders to Sharpen Lathe Turnin...
3. Savannah Blue and Yellow Transparent Center Finder for Square, Round, Octagon and Hexagon Shaped Mat...
4. Savannah Self Centering Pen and Bottle Stopper Drilling Vise Ideal For Wood Turners and Can Secure W...
5. Savannah Yellow Transparent Center Finder for 8 inch Square Round, Octagon and 5-3/4 inch Hexagon Sh...
6. Savannah Deluxe Pen Press For Assembling and Parts with Quick Release Adjustablility
7. LOC-Free Lathe Spindle Washer 2 Pack (1-1/4" Spindle Size)
8. Savannah Pen Press with Anodized Aluminum Base and Adjustable Assembly Rod with UHMW Pressure Stop f...
9. Savannah 3 piece Large Carbide Turning Tool Replacement Cutter Set. 1 each Square, Round and Diamond...
10. Savannah Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape,...

Features

• Direct replacement for Intervac and Dometic Model Y10-5 dust bags for models: CS6/CS8/CS10/CS8HW
• 99.7% filtration
• 5 Layers of filtration
• Great for allergy sufferers!
• Pet dander and dust are trapped in the bag
• See more on Amazon...

Features

• Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
• The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
• The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
• The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
• The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
• See more on Amazon...

Features

• Finally a device for finding center on larger objects! Enjoy the satisfaction of creating larger, symmetrical woodworking projects. Its lightweight construction of rugged, impact-resistant plastic makes for easy usability and long-lasting durability. In addition, the clear quality of the plastic insures optimal visibility. The center Finder features two v-stops, one on either side, for enhanced versatility.
• The 60-degree v-stop is ideal for Circular shapes, and the 90-Degree v-stop is great for square, Octagonal, hexagonal and Circular shapes as well. Simply set stock firmly against the V- stop of the device, and score your first line using the Straightedge guide, rotate stock 90-Degrees and mark your second line.
• The point where the perpendicular lines cross reveals the true center. To center ovals and rectangles, simply adjust the workpiece higher up on the v-fence to accommodate for the longer side of the shape when scoring the perpendicular line. It's a wood Turner's dream but it is also ideal in a wide variety of woodworking, jewelry-making and other professional and diy applications.
• Quickly locate the center for turning stock and other applications. The large blue center finder will work with a maximum 18 round, octagon & square; and 12-1/2 hexagon. The yellow center finder will work with a maximum 8 round, octagon & square; and 5-3/4 hexagon. Both center finders are made of impact-resistant plastic. A must have for all woodturners, crafters, carpenters, weekend warriors and professionals alike!
• You can depend on this device providing you with precision centering on your work stock. This handy tool allows you to quickly and easily pinpoint the exact center of Circular, square and octagonal-shaped stock and hexagonal-shaped stock. Inaccurate estimating will be a thing of the past.
• See more on Amazon...

Features

• This robust and uniquely designed Self Centering Pen Drilling Vise keeps your pen blanks secured. The jaws are parallel to one another and remain square to your drill press table to ensure accuracy. The jaws can open wide enough for wider bottle stopper blanks as well. The Savannah Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.
• This vise can also be used to drill Both Stopper Blanks!
• Vise will accept blanks up to 2-1/8 diagonally or up to 1-1/2 square.
• The Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.
• The solid metal construction makes this vise perfect for any pen turner.
• See more on Amazon...

Features

• Quickly locates the center for turning stock and other applications. Maximum 8" round, octagon & square; and 5-3/4" hexagon. This center finder is made of impact-resistant plastic. A must have for all woodturners and woodworkers alike!
• You can depend on this device providing you with precision centering on your work stock. This handy tool allows you to quickly and easily pinpoint the exact center of Circular, square and octagonal-shaped stock (sized up to 8) and hexagonal-shaped stock (sized up to 5-3/4). Inaccurate estimating will be a thing of the past.
• Enjoy the satisfaction of creating symmetrical woodworking projects. Its lightweight construction of rugged, impact-resistant plastic makes for easy usability and long-lasting durability. In addition, the clear quality of the plastic insures optimal visibility. The center Finder features two v-stops, one on either side, for enhanced versatility.
• The 60-degree v-stop is ideal for Circular shapes, and the 90-Degree v-stop is great for square, Octagonal, hexagonal and Circular shapes as well. Simply set stock firmly against the V- stop of the device, and score your first line using the Straightedge guide, rotate stock 90-Degrees and mark your second line.
• The point where the perpendicular lines cross reveals the true center. To center ovals and rectangles, simply adjust the workpiece higher up on the v-fence to accommodate for the longer side of the shape when scoring the perpendicular line. It's a wood Turner's dream but it is also ideal in a wide variety of woodworking, jewelry-making and other professional and diy applications.
• See more on Amazon...

Features

• SIMPLIFY TURNED PROJECT ASSEMBLY: Press together pen crafting components and other turned projects (after the barrel is turned on the lathe) Presser Tool for Turned Crafting Components; Easier to use than clamps or vise grips. Press quills and will not damage your finished pen
• USE WITH MOST ANY TURNED ITEM: For assembling mechanical components into turned pens and similar projects; Can be used to assemble turned items. Great for projects with larger diameters such as pepper mills intricate pieces like letter openers or shorter, stubby parts such as bottle stoppers
• QUICKLY ADJUST: Accurately assemble pens and other turned projects with the adjustment features; Threaded shaft can be repositioned over the entire range of the press by pressing the top aluminum button; Use the adjusting knob for pressure adjustments and screw/unscrew the pressure pad for length micro adjustment fine-tuning; Self-rotating plastic head automatically makes fine adjustments.
• Two ways to press pen parts - By using the lever or by tightening the knob.
• GRIP COMFORTABLY: Steel handle with rubber non-slip grip and lever pivot point delivers approximately 300 pounds of pressure force
• See more on Amazon...

Features

• Keep your lathe chuck from sticking to the spindle
• Made from slick, specially bonded plastic
• Comes in packs of 2
• Available for most lathe spindle sizes
• See more on Amazon...

Features

• If you have ever tried to assemble a pen without some sort of press or jig, then you know how difficult it can be. Keeping the pieces and parts together and in line can be a chore all on its own. This pen press eliminates those typical headaches when assembling pens. From the tip to the caps and most everything in between, this press will help you produce wonderful looking and properly working pens each and every time you use it.
• The press can exert up to 30 pounds of pressure when pressing pens. This is more than enough for most any pen style. Usually when pressing pen parts we start with the tip and work our way back so to speak to the cap and clip. This press handles all of those assembly steps and it can do it with just the right amount of pressure each time
• The adjustable assembly rod can be adjusted in and out to accept most any length of pen barrel. Simply loosen the large, easy to handle knob to make any adjustments as needed. You can even adjust the aluminum toggle stop in and out to micro adjust to just the right amount of distance or pressure needed for your pen.
• The pen press is mounted to a solid piece of anodized extruded aluminum. This provides you with enough surface area to easily clamp the pen vise to a workbench or table top. The aluminum base measures approximately 15 in length and is 3 wide. The max distance between the toggle stop and the UHMW stop is approximately 6 -5/8 .
• Included with the pen press are two wooden dowels. The dowels fit neatly into the center hole on the UHMW pressure stop. Each dowel protrudes out of the UHMW pressure stop to act as a holder for the pen barrel. It s the perfect way to keep the barrel in place without having to hold in place with your fingers! This pen press is the perfect addition for any pen turner who needs to be precise when assembling pens!
• See more on Amazon...

Features

• Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don t have to sharpen tools when they become dull over time. Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning.
• Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw.
• Carbide cutters don t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to produce much cleaner cuts and tends to be easier to use than standard styles of turning tools. The cutters will NOT fit on mini versions of carbide turning tools.
• These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the Savannah 3 piece cutter set may work with many other brands of carbide turning tools that you may already have in your shop. This cutter set comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the screws that came with your turning tools to properly secure these cutters.
• We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. This pack also includes 2 screws for securing the cutters to the tool. Please note: the screws in this pack may or may not properly fit your turning tool. This means you must use the screws that came with your original turning tool. Set includes the CUTTERS ONLY: 1 each round carbide cutter, 1 each square carbide cutter and 1 each diamond shaped carbide cutter.
• See more on Amazon...

Features

• Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.
• All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter.
• To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly.
• The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2 from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.
• Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539) cutter tools. The round tool measures appx. 6-9/16 from the tip of the cutter to the ferrule, the square tool measures appx. 6-9/16 from the tip of the cutter to the ferrule and the diamond shaped tool measures appx. 6-5/8 from the tip of the cutter to the ferrule
• See more on Amazon...

Features

• Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning the results can be more than undesirable. With the Savannah Carbide Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and hold the tool in position to cut clean and smoothly.
• When the tool dulls, simply rotate the tip for a fresh, clean cutting edge. The carbide tips will stay sharper longer compared to standard turning tools as well. The tips are replaceable when needed (extra tips are sold separately).
• Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action. This produces much cleaner cuts and tends to be easier then using standard turning tools
• The handles each have molded grips that provide better grip and less fatigue after extended periods of use. Over all Length: Approximately 13-1/8 Handle Length: Approximately 9-1/8 Tool Shaft: Approximately 4 Set Includes: 1 ea. Mini Turning Tool with Square Carbide Tip 1 ea. Mini Turning Tool with Round Carbide Tip 1 ea. Mini Turning Tool with Diamond Carbide Tip Note: Tips can be replaced with Easy Wood Carbide Tips.
• Overall Length Approximately 13-1/8, Handle Length Approximately 9 1/8, Tool Shaft Approximately 4. Set Includes: All 3 tools and Black Storage Case
• See more on Amazon...

Features

• The GrindMaster Sharpening Jig produces razor sharp tools and finely finished bevels. Sharpening your tools has shifted from a difficult to perform art into a simple to use science. Owning the GrindMaster Sharpening Jig will ultimately save you time and produce finely honed tools every time.
• Uniform cutting edges and single facet bevels will give you safer, more predictable tools. Because you will be grinding your tools less, both your wheels and tools will last longer
• The GrindMaster can be used to sharpen the following tools: gouges, chisels, scrapers, parting tools, skews, and carving tools
• The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 degrees.
• The GrindMaster Sharpening Jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease. Parting tools are sharpened using the platform
• See more on Amazon...

Features

• If you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough textured items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles.
• The clear round design of the center finder/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle.
• The black printed index markings appear clearly on lighter colored surfaces and line up with a different size diameter hole in 1/8 increments. You can layout and draw circles from 1 to 10 in diameter. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. Works on wood, poster board, plastic, metal, glass, composites and more!
• It also doubles as a center finder that works exceptionally well on irregularly shaped items like wooden logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a perfect circle . The center finder/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This also helps produce maximum yield on logs smaller than 10 in diameter.
• Made from clear, lightweight, flexible, fully transparent acrylic, the center finder/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this center finder/compass is the tool to reach for.
• See more on Amazon...

Features

• Many times while sharpening our turning and general shop tools, we setup our jigs and fixtures to prescribed angles. Thing is, most sharpening systems don t supply us with any way of checking our angles while we work. With the steel Savannah Turning Tool Angle Gauge you can check 8 different angles that are commonly used for various wood turning tools as well as common shop tools like chisels. It s perfect for checking your angles on the fly while your honing your tools.
• Quick angle checking has never been easier while sharpening or for just simply checking the angle of an old tool laying around your workshop. The steel 3 diameter Savannah Turning Tool Angle Gauge comes with a turning tool angle chart to quickly identify the correct recommended angles for 8 turning tools.
• The Savannah Angle Turning Tool Angle Gauge can determine the following angles: 30 degree for aggressive spindle gouge angle, 37 degree for skew chisels, 40 degree for spindle gouges, 45 degree for bowl gouges, 50 degree for roughing gouges, 55 degree for bowl gouges, 60 degree (blunted for strong cutting edges) and 82 degrees for bowl scrapers. Each of these specific tool angles are recommendations only.
• Some general tool angles that can also be checked with this gauge: 30 degree for standard chisels and hand plane blades, 45 degree for axes, wood turning parting tools and 50 degrees for various other turning tools.
• The degree markings on the angle gauge are stamped into the steel so you will always be able to read the angles without fear of them wearing off over time. The gauge is made from steel and measures approximately 3 inches in diameter. It has a pre-drilled hole at the top for easy storage or to hang from a keychain if you do a lot of sharpening.
• See more on Amazon...

Features

• Ideal for turning smaller bottle stoppers
• Milled in collar makes turning to size easier
• Available in three different but common smaller sizes:
• Micro, Mini and Standadrd
• Chuck lathe thread size is 1 x 8tpi on all three chucks
• See more on Amazon...

Features

• If you have ever tried to use a standard compass to draw a circle on irregularly shaped or rough textured items then you know your results can be mixed at best. Trying to keep the compass centered while making a clearly marked circle can be tough in this situation. The Round, Clear Acrylic Center Finder/Compass solves this issue by providing a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles.
• The clear round design of the center finder/compass allows you to see exactly what you are doing and assists you with quick, easy placement. Once you locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle.
• The white printed index markings appear clearly on darker colored surfaces while the black printed index marks appear clearly on lighter colored surfaces. The markings line up with a different size diameter hole in 1/8 increments. Making this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle. Works on wood, poster board, plastic, metal, glass, composites and more!
• It also doubles as a center finder that works exceptionally well on irregularly shaped items like wooden logs. When laying out a circle on a log one of the toughest things to do is to find the center or cut just the right amount of wood off to create a perfect circle . The center finder/compass helps with this by allowing you to lay the disc on to the log and easily identify the largest circle possible on the log. This also helps produce maximum yield on logs smaller than 10 in diameter.
• Made from clear, lightweight, flexible, fully transparent acrylic, the center finder/compass is perfect for many different shop, job site or around the home applications. Wherever you need a circle drawn or need to find center on irregularly shaped items this center finder/compass is the tool to reach for. Includes 1 white printed disc and 1 black printed disc.
• See more on Amazon...

Features

• Whether you re a beginner or a professional wood turner, live centers have become a very useful and in all honesty a very necessary lathe accessory when turning between centers. Live centers fit directly into your lathe tailstock and rotates as your stock piece rotates.
• This type of action is great for turning because it keeps your wood from burning, yet it holds your stock in place. The live center allows for greater clamping pressures and much better control while still retaining their incredibly smooth rotation.
• It is equipped with bearings that allow it rotate at low or high lathe speeds which allows the center to be used on projects as small as pens or as large as pepper mills.The tip or live center cone is at a common 60 degree angle and measures 1-9/32 in diameter.
• This allows it to fit inside of pre-bored out holes that are smaller then the cone diameter. Works very well on projects like spindles, dowels, pepper mills and much much more.
• ade from heavy duty steel for years of service. Available in MT1 and MT2 sizes which are both sold separately. Please check your lathes opening (Morse Taper) size. Morse Taper sizes vary from lathe to lathe. While the Morse Taper 2 size is more common, many of the smaller lathes today use the MT1 size. Please refer to your lathe owners manual for detailed information about your lathe.
• See more on Amazon...

Features

• Hollow forms can be one of the most gratifying wood turning projects you can do. The result when you complete your hollow form is a tremendous sense of accomplishment. The overall look and feel of a piece of wood that is hollowed out with uniform side walls is very unique and usually begs the question, did you make that? That just may be wood turners favorite response to projects they show friends and family.
• Hollow forms can be a bit tricky since its difficult to see inside of the form when you re turning which can make it tough to achieve the final result you want. Most hollowing tools have a heavy, cumbersome round shank that can be difficult to control. This makes hitting your marks difficult and sometimes dangerous. The Savannah Carbide Hollower tools eliminate this issue with heavy duty flat steel bars with a replaceable carbide tip cutter.
• The Savannah Hollowing Tools are perfect for larger hollowing turning projects. Instead of cutting the wood which can sometimes cause the tool to catch, the Savannah Hollowing tools employ a razor sharp carbide cutter that shears the wood. The flat bar in combination with the carbide cutter makes the hollowing process easier by helping you keep your tool parallel to the lathe bed. This means much less tool movement and much less chance for catching. Now you can hollow forms with confidence!
• The carbide tip cutter is made from tungsten carbide and is designed to shear the wood versus cutting the wood like traditional hollowers. This helps produce a better finish which in turn means less sanding. When its time, you can loosen the set screw and rotate the cutter a quarter turn to cut with a fresh, razor sharp edge. When the cutter is used up, simply replace the carbide cutter with a new one (replacement cutter not included).
• The Savannah Hollowing Tools each have a heavy hardwood handle that is a full 19 long to provide you with plenty of leverage for larger hollowing projects. The tools are held on to the handle with a heavy duty ferrule for extra stability. The base of each handle is flush wrapped with a comfortable rubber grip to help absorb vibration and reduce hand fatigue.
• See more on Amazon...

Features

• Reduce your spindle size on your lathe
• Great for using different lathe accessories that have a smaller thread size
• Reduce your 1-1/4 x 8 tpi lathe spindle size down to a 1 x 8 tpi thread size
• The adapter has flats on both sides for loosening and tightening
• Extends the spindle over 1-1/2
• See more on Amazon...

Features

• 4 point easy adjustment ratchet suspension
• Twist knob to adjust
• Rain trough on sides & back of helmet channel moisture away
• Soft brow pad absorbs perspiration
• Universal accessory slots fit most cap mounted ear muffs & accessories
• See more on Amazon...

Features

• A pen turning essential
• Precision machined steel shaft
• Turning shorter blanks is easier with the Pen Mandrel Pro
• Morse taper means no need for a drill chuck
• Works great with a live center (not included)
• See more on Amazon...

Features

• Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don t have to sharpen tools when they become dull over time. Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning.
• Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw.
• Carbide cutters don t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to produce much cleaner cuts and tends to be easier to use than standard styles of turning tools. This carbide cutter fits the Savannah Hollower tools as well as other popular Mid-Size Hollower tools.
• This cutter comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the screws that came with your turning tools to properly secure this cutter.
• While carbide cutters are designed to be disposed of when they are no longer sharp enough to cut into your material, you can sharpen these cutters by simply using a flat diamond stone or card. Lay the cutter with the wide (top), flat side against the diamond card and using your finger slide the cutter approximately 7-10 times back and forth. You may use lapping fluid or oil if desired. Doing so, will prolong the life of your cutter even more!
• See more on Amazon...

Features

• Hollow forms can be one of the most gratifying wood turning projects you can do. The result when you complete your hollow form is a tremendous sense of accomplishment. The overall look and feel of a piece of wood that is hollowed out with uniform side walls is very unique and usually begs the question, did you make that? That just may be wood turners favorite response to projects they show friends and family.
• Hollow forms can be a bit tricky since its difficult to see inside of the form when you re turning which can make it tough to achieve the final result you want. Most hollowing tools have a heavy, cumbersome round shank that can be difficult to control. This makes hitting your marks difficult and sometimes dangerous. The Savannah Carbide Hollower tools eliminate this issue with heavy duty flat steel bars with a replaceable carbide tip cutter.
• The Savannah Hollowing Tools are perfect for larger hollowing turning projects. Instead of cutting the wood which can sometimes cause the tool to catch, the Savannah Hollowing tools employ a razor sharp carbide cutter that shears the wood. The flat bar in combination with the carbide cutter makes the hollowing process easier by helping you keep your tool parallel to the lathe bed. This means much less tool movement and much less chance for catching. Now you can hollow forms with confidence!
• The carbide tip cutter is made from tungsten carbide and is designed to shear the wood versus cutting the wood like traditional hollowers. This helps produce a better finish which in turn means less sanding. When its time, you can loosen the set screw and rotate the cutter a quarter turn to cut with a fresh, razor sharp edge. When the cutter is used up, simply replace the carbide cutter with a new one (replacement cutter not included).
• The Savannah Hollowing Tools each have a heavy hardwood handle that is a full 19 long to provide you with plenty of leverage for larger hollowing projects. The tools are held on to the handle with a heavy duty ferrule for extra stability. The base of each handle is flush wrapped with a comfortable rubber grip to help absorb vibration and reduce hand fatigue.
• See more on Amazon...

Features

• Performs better than standard, smaller single rods
• 3/4 Diameter steel rods
• No need for a drill chuck or morse taper adaptor
• Mounts to tail stock
• 9 Total reach
• See more on Amazon...

Features

• Hollow forms can be one of the most gratifying wood turning projects you can do. The result when you complete your hollow form is a tremendous sense of accomplishment. The overall look and feel of a piece of wood that is hollowed out with uniform side walls is very unique and usually begs the question, did you make that? That just may be wood turners favorite response to projects they show friends and family.
• Hollow forms can be a bit tricky since its difficult to see inside of the form when you re turning which can make it tough to achieve the final result you want. Most hollowing tools have a heavy, cumbersome round shank that can be difficult to control. This makes hitting your marks difficult and sometimes dangerous. The Savannah Carbide Hollower tools eliminate this issue with heavy duty flat steel bars with a replaceable carbide tip cutter.
• The Savannah Hollowing Tools are perfect for larger hollowing turning projects. Instead of cutting the wood which can sometimes cause the tool to catch, the Savannah Hollowing tools employ a razor sharp carbide cutter that shears the wood. The flat bar in combination with the carbide cutter makes the hollowing process easier by helping you keep your tool parallel to the lathe bed. This means much less tool movement and much less chance for catching. Now you can hollow forms with confidence!
• The carbide tip cutter is made from tungsten carbide and is designed to shear the wood versus cutting the wood like traditional hollowers. This helps produce a better finish which in turn means less sanding. When its time, you can loosen the set screw and rotate the cutter a quarter turn to cut with a fresh, razor sharp edge. When the cutter is used up, simply replace the carbide cutter with a new one (replacement cutter not included).
• The Savannah Hollowing Tools each have a heavy hardwood handle that is a full 19 long to provide you with plenty of leverage for larger hollowing projects. The tools are held on to the handle with a heavy duty ferrule for extra stability. The base of each handle is flush wrapped with a comfortable rubber grip to help absorb vibration and reduce hand fatigue.
• See more on Amazon...

Features

• Jaws will expand and grip in a 2-3" dovetailed recess
• 1 x 8 TPI
• Self-Centering
• Holds round stock between 1-5/8 and 2-3/4 or square billets 1-1/8 to 2-1/8 in size
• Chrome-plated body
• See more on Amazon...

Features

• Hollow forms can be one of the most gratifying wood turning projects you can do. The result when you complete your hollow form is a tremendous sense of accomplishment. The overall look and feel of a piece of wood that is hollowed out with uniform side walls is very unique and usually begs the question, did you make that? That just may be wood turners favorite response to projects they show friends and family.
• Hollow forms can be a bit tricky since its difficult to see inside of the form when you re turning which can make it tough to achieve the final result you want. Most hollowing tools have a heavy, cumbersome round shank that can be difficult to control. This makes hitting your marks difficult and sometimes dangerous. The Savannah Carbide Hollower tools eliminate this issue with heavy duty flat steel bars with a replaceable carbide tip cutter.
• The Savannah Hollowing Tools are perfect for larger hollowing turning projects. Instead of cutting the wood which can sometimes cause the tool to catch, the Savannah Hollowing tools employ a razor sharp carbide cutter that shears the wood. The flat bar in combination with the carbide cutter makes the hollowing process easier by helping you keep your tool parallel to the lathe bed. This means much less tool movement and much less chance for catching. Now you can hollow forms with confidence!
• The carbide tip cutter is made from tungsten carbide and is designed to shear the wood versus cutting the wood like traditional hollowers. This helps produce a better finish which in turn means less sanding. When its time, you can loosen the set screw and rotate the cutter a quarter turn to cut with a fresh, razor sharp edge. When the cutter is used up, simply replace the carbide cutter with a new one (replacement cutter not included).
• The Savannah Hollowing Tools each have a heavy hardwood handle that is a full 19 long to provide you with plenty of leverage for larger hollowing projects. The tools are held on to the handle with a heavy duty ferrule for extra stability. The base of each handle is flush wrapped with a comfortable rubber grip to help absorb vibration and reduce hand fatigue.
• See more on Amazon...

Features

• Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Hollowing Carbide turning tool is the perfect tool for under-cutting hollow forms. Designed to allow any skill level of turners to achieve high quality results for hollowing work with virtually no fuss. The unique shape of the hollower neck is designed to give you better access to the most difficult hollow form shapes.
• The Handle measures approximately 19 in length from the butt to the stainless steel ferrule and is coated with a rubber grip at the base to reduce hand fatigue.
• The shank is flat on both sides offering you great stability while hollowing small or large forms.
• The shank measure approximately 8-3/4 from the top of the stainless steel ferrule to the center of the carbide cutter head. The round carbide cutter head can be rotated as needed for clean, sharp cutting edge.
• Once the carbide cutter is completely used up, simply replace the tip with a new one. Extra Tip Sold separately.
• See more on Amazon...

Features

• Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.
• All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter.
• To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly.
• The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2 from the butt to the stainless steel ferrule.
• The square tool measures appx. 6-9/16 from the tip of the cutter to the ferrule
• See more on Amazon...

Features

• Jaws will expand and grip in a 2-3" dovetailed recess
• 1-1/4 x 8 TPI
• Self-Centering
• Holds round stock between 1-5/8 and 2-3/4 or square billets 1-1/8 to 2-1/8 in size
• Chrome-plated body
• See more on Amazon...