Shars - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Shars 1/8" Precision Machinist Steel Parallels Set, 10 Pairs 303-7201 P[
Asin: B078T2JZM9 | Model: 303-7201-Parent | PartNumber: 303-7201-Parent | Ean: 0000030372016 | UPC: 000030372016
All The Size Are 6" Long And 1/8" Wide Or Thick.
Each Set Contains 1 Pair Of The Height Listed: 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" & 1-5/8".
Each Parallel Has Holes To Make Handling Easier.
Made From High Quality Tool Steel Stress Relief Against Distortion, Precision Ground And Hardened.
Pair Height Is Within +/-.0002".
Features
- SKU# 303-7201
- Pair height is within +/-.0002
- All the size are 6 Long and 1/8 Wide or Thick
- Made from high quality tool steel stress relief against distortion, precision ground and hardened
- Each Set contains 1 Pair of the height listed: 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2 & 1-5/8
- Each parallel has holes to make handling easier
- See more on Amazon...
Brand: Shars | Manufacturer: Shars Tool
Weight: 5.00 pounds
See On Amazon #2
Shars 3/16-3/4" 4 Flute HSS Single End Center Cut End Mill Set 10PCS 404-5872 M)
Asin: B082325KW2
Brand: Shars | Manufacturer: Shars
See On Amazon #3
SHARPOTS Pepper Spray Maximum Strength Powerful Pepper Spray for Easy Access Outdoor Camping & Hiking Protection and Other Outdoor Activities 6.7oz
Asin: B0CNNJ1K94
Personal Protection You Can Trust: Sharpots Home Self Defense Pepper Gel Can Provide The Maximum Heat And Stopping Power In Every Burst And Eliminating The Failure Rate While You Defend Against Threats..
Ergonomic Handle Safe Design:Ergonomic Handle Of Sharpots Tactical Pepper Gel Provides Complete Grip And Can Be Easily Held Even In Harsh Conditions. If You Have Any Questions, Please Feel Free To Contact Us, We Will Solve The Problem For You At Any Time..
Easy To Use:Sharpots Home Pepper Spray Allows With Quick Release For Easy Access. This Pepper Spray Has A Ring Handle With A Safety Clip, Which Is Easy To Carry And Prevents Accidental Pressing..
Maximize Target Acquisition: Sharpots Tactical Spray For Home Self Defense Can Optimize Target Acquisition Relying On Its Defense Technology With Quick Release For Easy Access..
Features
- SHARPOTS Home Self Defense Tactical Pepper Gel has an impressive 20 feet range with a powerful stream to reduce wind blowback by pulling the safety pin and pressing the lever. Pepper spray offers an extreme blast of powerful 10% OC pepper formula ( 2.0% Capsaicinoids) for Personal Protection.
- Maximize Target Acquisition: SHARPOTS Tactical Spray for home Self Defense can optimize target acquisition relying on its defense technology with Quick Release for Easy Access.
- Personal Protection You Can Trust: SHARPOTS Home Self Defense Pepper Gel can provide the maximum heat and stopping power in every burst and eliminating the failure rate while you defend against threats.
- Easy to Use SHARPOTS Home pepper spray allows with quick release for easy access. This pepper spray has a ring handle with a safety clip, which is easy to carry and prevents accidental pressing.
- Ergonomic Handle Safe Design Ergonomic handle of SHARPOTS Tactical Pepper Gel provides complete grip and can be easily held even in harsh conditions. If you have any questions, please feel free to contact us, we will solve the problem for you at any time.
- See more on Amazon...
Brand: SHAR POTS | Manufacturer: SHARPOTS
Dimensions: 7.00 x 2.00 x 2.00 inches | Weight: 0.51 Pounds
Warranty: 4 year
See On Amazon #4
Shars Plate Demagnetizer Tool Dies Cutter, 6-1/2" x 4-1/2", 120V 202-1170 R
Asin: B081GG3X7V | Model: 202-1170 | PartNumber: 202-1170
On-Off Switch.
Effectively Removes Residual Magnetism; Virtually Demagnetizes Any Piece In Seconds.
Thermally Protected Against Burnouts.
120V, 600W, 5Amp.
Features
- Size: 6.75x4.5"
- 120V, 600W, 5Amp
- on-off switch
- Thermally protected against burnouts
- Effectively removes residual magnetism; Virtually demagnetizes any piece in seconds
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 8.00 Pounds
See On Amazon #5
Shars R8 Shank 2-1/2" Fly Cutter for 3/8 Toolbit 202-5157 ^]
Asin: B00HYN7MXO
Makes Wider Cuts Than End Mills.
Less Chatter And Free-Cutting On Thin Material Or Non-Rigid Set Ups.
Faster Speeds And Better Finishes.
Uses Inexpensive Standard Tool Bits.
Features
- Part# 202-5157
- Uses inexpensive standard tool bits
- Makes wider cuts than end mills
- Faster speeds and better finishes
- Less chatter and free-cutting on thin material or non-rigid set ups
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #6
Shars 18"/450mm Heavy Duty Long Jaw Electronic Caliper, 0.0005"/0.01mm Resolution, Large LCD Screen 303-1511 R]
Asin: B0881Y5MKV | Model: 303-1539-parent | PartNumber: 303-1539-parent | Ean: 0000330315119 | UPC: 000330315119
Product Inculded: - Fitted Case. - Battery.
Brand: Shars | Manufacturer: Shars
See On Amazon #7
Shars 5C Adjustable Threaded Collet Stop 202-5716 ![
Asin: B09BBNR3ZL | Model: 202-1352-parent | PartNumber: 202-1352-parent | Ean: 0000220257161 | UPC: 000220257161
Fits Any 5C Id Threaded Collet With 1-3/64 -24 Internal Thread.
Hardened Black Oxide.
Full Hex Milled For Use Of Box Wrench And Or Open End.
Compatible Collet Series: 5C Collets.
Features
- SKU# 202-5716
- Compatible Collet Series: 5C collets
- Fits any 5C ID threaded collet with 1-3/64 -24 internal thread
- Full hex milled for use of box wrench and or open end
- Hardened black oxide
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 0.38 Pounds
See On Amazon #8
Shars OXA Wedge Type CNC Lathe Quick Change Tool Post 6 PCS Set For 6" - 9" Lathe Swing, Cutoff Tool 4 202-9460 S)
Asin: B087QMBF32 | Model: 404-9469-parent | PartNumber: 404-9469-parent | Ean: 0000220294609 | UPC: 000220294609
Advanced Design Provides Positive Rigidity To Meet The Most Exacting Working Tolerances..
Oxa Wedge Type Set Includes One Of Each: Quick Change Tool Post (P/N 202-9505) ;Turning And Facing Holder #1 (P/N 202-9513) ;Boring Turning And Facing Holder #2 (P/N 202-9499) ;Universal Parting Blade Tool Holder #7 (P/N 202-9509-4) ;Heavy Duty Boring Bar Holder #4 (P/N 202-9501) ;Knurling Turning & Facing Holder #10 (P/N 202-9497).
Interchangeable With Phase Ii And Dorian Same Series..
Tool Posts Are Precision Engineered To Assure Repetitive Accuracy..
Features
- Part# 202-9460
- Tool posts are precision engineered to assure repetitive accuracy.
- Advanced design provides positive rigidity to meet the most exacting working tolerances.
- Interchangeable with Phase II and Dorian same series.
- OXA Wedge Type Set includes one of each: Quick Change Tool Post (p/n 202-9505) ;Turning and Facing Holder #1 (p/n 202-9513) ;Boring Turning and Facing Holder #2 (p/n 202-9499) ;Universal Parting Blade Tool Holder #7 (p/n 202-9509-4) ;Heavy Duty Boring Bar Holder #4 (p/n 202-9501) ;Knurling Turning & Facing Holder #10 (p/n 202-9497)
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #9
Shars 5/8" T-SLOT 12 PCS Hex Clamp Kit Bridgeport Mill New 202-4799 ^
Asin: B07ZTWJMPC | Model: 202-4799 | PartNumber: 202-4799 | Ean: 0000220247995 | UPC: 000220247995
No Loose Parts To Reassemble.
6 Fixture Clamps, 2 Hex Keys.
Positive Side Gripping Action Provides Greater Strength.
If One Of The Six Sides Is Worn Or Damaged Just Turn To Another, Half Turn Provides .100" Movement.
Features
- 4 T-nuts, thread 1/2-13, 5/8 t-slot
- If one of the six sides is worn or damaged just turn to another, Half turn provides .100 movement
- No loose parts to reassemble
- Positive side gripping action provides greater strength
- 6 Fixture Clamps, 2 Hex Keys
- See more on Amazon...
Brand: Shars | Manufacturer: SHARS
Weight: 2.00 Pounds
See On Amazon #10
Shars 12" 4R Graduation Combination Square Set 303-6101 P)
Asin: B07ZJQN6QC | Model: 303-6101 | PartNumber: 303-6101 | Ean: 0000130361019 | UPC: 000130361019
Number Of Pieces: 4.
Fractional Graduation: 8Ths 16Ths 32Nds 64Ths.
Graduation Style: 4R.
Blade Length: 12.
Features
- SQUARE CATEGORY: Combination Squares
- BLADE LENGTH: 12
- NUMBER OF PIECES: 4
- GRADUATION STYLE: 4R
- FRACTIONAL GRADUATION: 8ths 16ths 32nds 64ths
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 3.00 Pounds
See On Amazon #11
Shars R8 Shank to 2MT Sleeve Fits Bridgeport MT2 Morse Taper 202-1433 !
Asin: B07YYMPX1Y | Model: 202-1433 | PartNumber: 202-1433 | Ean: 0000120214332 | UPC: 000120214332
Arbor Will Fit All Drill Chucks That With A 2Mt Bore And Will Fit On Any Machine Tool With A R8 Spindle..
Made Of Superior Quality Alloy Steel Precision Grounded..
Features
- R8 to MT2. Long end is R8, short end is 2MT
- Made of superior quality alloy steel precision grounded.
- Arbor will fit all drill chucks that with a 2MT bore and will fit on any machine tool with a R8 spindle.
- See more on Amazon...
Brand: Shars | Manufacturer: SHARS
Weight: 0.81 Pounds
See On Amazon #12
Shars 1/32-1/2" JT33 Heavy Duty Keyless Drill Chuck, JT33 Mount 202-5013 ^]
Asin: B0812BX8JS | Model: 202-5010-parent | PartNumber: 202-5010-parent
Mounting Size: 33Jt.
Tir (Inch): 0.0048.
Capacity: 1/32-1/2".
Brand: Shars | Manufacturer: Shars
See On Amazon #13
Shars 2" Boring Head + 3/4" Straight Shank + 1/2" C6 Boring Bar 9 Pcs Set 202-8042+202-8004+404-7120 M]
Asin: B084CSLMXF | Model: 202-8042+202-8004+404-7120 | PartNumber: 202-8042+202-8004+404-7120
Thread: 1.5"-18.
Style: 3/4" Straight.
Maximum Offset: 5/8".
Boring Bar Hole: 1/2".
Features
- Head size: 2"
- Boring bar Hole: 1/2
- Thread: 1.5-18
- Maximum Offset: 5/8
- Style: 3/4 Straight
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #14
Shars 1/2"-13 Flange Nuts 5pcs Set Clamping Kit for Bridgeport Mill 202-4807(5) ![
Asin: B07Z5FY1W9 | Model: 202-4805-parent | PartNumber: 202-4805-parent | Ean: 0000120248078 | UPC: 000120248078
Washer Diameter: 1-1/8"; Height: 5/8".
Large Bearing Ensures Full Surface Control.
Heat Treated Steel, Black Oxide.
Thread Size : 1/2"-13; Hex Size: 7/8".
Features
- SKU# 202-4807
- Thread Size : 1/2-13; Hex Size: 7/8
- Washer Diameter: 1-1/8; Height: 5/8
- Heat treated steel, black oxide
- Large bearing ensures full surface control
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #15
Shars R8 Shank to 3MT Sleeve Fits Bridgeport MT3 Morse Taper 202-1434 !
Asin: B07YYLLJL9 | Model: 202-1434 | PartNumber: 202-1434 | Ean: 0000120214349 | UPC: 000120214349
Arbor Will Fit All Drill Chucks That With A 3Mt Bore And Will Fit On Any Machine Tool With A R8 Spindle..
Made Of Superior Quality Alloy Steel Precision Grounded..
Features
- R8 to MT3. Long end is R8, short end is 3MT
- Made of superior quality alloy steel precision grounded.
- Arbor will fit all drill chucks that with a 3MT bore and will fit on any machine tool with a R8 spindle.
- See more on Amazon...
Brand: Shars | Manufacturer: SHARS
Weight: 0.81 Pounds
See On Amazon #16
Shars R8 Collet Rack & Tool Tray with 11 holes High Precision 202-2817 P[
Asin: B07ZQLHSC7 | Model: 202-2817-parent | PartNumber: 202-2817-parent
Holds 11 Pcs R8 Collets.
Can Be Mounted On Any Flat Surface Of The Machine Or Tool Crib.
Made Of Plastic Material.
Collet Series: R8.
Features
- SKU# 202-2817
- COLLET SERIES: R8
- Holds 11 pcs R8 collets
- Made of plastic material
- Can be mounted on any flat surface of the machine or tool crib
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #17
Aventor 0-6"/0-150mm Absolute DPS Digital Caliper IP54 Protection, Resolution 0.0005"/0.01mm 303-1551 P]
Asin: B07NJBSRCG | Model: 303-1551-parent | PartNumber: 303-1551-parent | Ean: 3031551658461
Dust/Water Protection Level: Ip54; Max. Response Speed: Unlimited.
Length Standard: Dps Linear Encoder; Data Output: Yes.
Lcd Display Size: 29.4Mm X 10.4Mm (9Mm Digit Height); Battery 3V Cr2032 Lithium Battery.
Accuracy (Tolerance Range): 0.001" / 0.02Mm; Jaw Depth: 40Mm.
Features
- SKU# 303-1551
- Accuracy (Tolerance Range): 0.001 / 0.02mm; JAW DEPTH: 40mm
- Dust/Water Protection Level: IP54; Max. Response Speed: Unlimited
- LCD Display Size: 29.4mm x 10.4mm (9mm Digit Height); Battery 3V CR2032 Lithium battery
- Length standard: DPS linear encoder; DATA OUTPUT: Yes
- See more on Amazon...
Brand: Aventor | Manufacturer: Shars
See On Amazon #18
Shars 0-8" Precision Stainless Steel Shock Proof Dial Caliper .001" Graduation Black Face 303-1307B P)
Asin: B0881X5JJY | Ean: 0000430313077 | UPC: 000430313077
Brand: Shars | Manufacturer: Shars
See On Amazon #19
Shars Self-Aligning Align Tap & Reamer Holder 4 Jaw V Guide 404-7388A P
Asin: B081VX3B3Z | Model: 404-7388A | PartNumber: 404-7388A
Center Drill On Stem For Floating Center; Type:120 Degree V Guide.
Product Included: - Tapping Guide; - Tap Wrench; - Two Collets (One For #0-#80 To 1/4-20 Taps And The Other One For 1/4-20 To 1/2-13 Taps).
Capacity: 0-80 To 10-24 & 1/4-20 To 1/2-13.
Hardened Sleeves And Jaws; Base Guide Has 120° Vee For Round Parts.
Features
- 85% Tap breakage eliminated; Holds tool true-perfect alignment
- Hardened sleeves and jaws; Base guide has 120 vee for round parts
- Center drill on stem for floating center; Type:120 Degree V Guide
- Capacity: 0-80 to 10-24 & 1/4-20 to 1/2-13
- Product Included: - Tapping guide; - Tap Wrench; - Two collets (one for #0-#80 to 1/4-20 taps and the other one for 1/4-20 to 1/2-13 taps)
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #20
Shars 9/16" T-Slots Nut, 1/2"-13 Thread 5pcs/Pack 202-4817 (5) ![
Asin: B09SVNNYHM | Model: 202-4813-parent | PartNumber: 202-4813-parent | Ean: 0000220248176 | UPC: 000220248176
Slot Width T: 9/16"; Slot Height H: 11/32".
Material: Steel; Thread Hole Type: Blind Tapped.
Overall Height H: 5/8"; Base Width W: 7/8"; Length: 1-1/8".
Thread Size: 1/2"-13.
Features
- SKU# 202-4817
- Thread Size: 1/2-13
- Slot Width T: 9/16; Slot Height h: 11/32
- Overall Height H: 5/8; Base Width W: 7/8; Length: 1-1/8
- Material: Steel; Thread Hole Type: Blind Tapped
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #21
Shars R8 to JT3 Drill Chuck Arbors 202-1335 P[
Asin: B07YSYHBQF | Model: 202-1336-parent | PartNumber: 202-1336-parent
Brand: Shars | Manufacturer: Shars
Weight: 0.88 Pounds
See On Amazon #22
Shars 5 inch 3 jaw Self Centering Scroll Lathe Chucks 2 Piece Reversible Jaws 202-6299 L[
Asin: B084CVVQTV
Diameter: 5".
Bolt Circle Diameter: 4.252".
Two Piece Jaw Configuration With A Master Jaw And A Top Reversible Jaw In American Standard Tongue And Groove.
Center Hole: 1.181".
A Matching Back Plate (Sold Separately) Would Need To Be Machined On The Face And Hub Od In Order To Fit This Chuck. For Detailed Information, Please Look For The Shars Back Plate Machining Guide..
Features
- Part# 202-6299
- A matching back plate (sold separately) would need to be machined on the face and hub OD in order to fit this chuck. For detailed information, please look for the Shars back plate machining guide.
- Diameter: 5
- Center hole: 1.181
- Bolt Circle Diameter: 4.252
- Two piece jaw configuration with a master jaw and a top reversible jaw in American Standard tongue and groove
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #23
Shars 6"/150mm Electronic Digital Caliper, Large LCD Screen 303-1500 P]
Asin: B0881XPQPX | Model: 303-1501-parent | PartNumber: 303-1501-parent | Ean: 0000330315003 | UPC: 000330315003
Jaw Depth: 1-9/16".
Lcd Display: 1.5" L X 0.51" H; Data Output: Yes.
Resolution: 0.0005"/0.01Mm; Accuracy: ±0.001"/0.025Mm.
Measuring Range: 0-6"/0-150Mm.
Features
- SKU# 303-1500
- Measuring Range: 0-6/0-150mm
- Jaw Depth: 1-9/16
- Resolution: 0.0005/0.01mm; Accuracy: 0.001/0.025mm
- LCD Display: 1.5 L x 0.51 H; Data Output: Yes
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Dimensions: 0.01 x 6.00 x 2.00 Inches | Weight: 0.75 Pounds
See On Amazon #24
Shars 3/16-3/4" JT3 Heavy Duty Keyless Drill Chuck with R8 Drill Chuck Shank 202-5000+1335 ^
Asin: B07ZJS11G1 | Ean: 0000220250001 | UPC: 000220250001
Mounting Size: 3Jt.
Tir (Inch): 0.0002.
Product Included: One Piece Of 3/4' Drill Chuck (202-5000); One Piece Of R8 Arbor (202-1335).
Arbor Shank Size: R8.
Tir (Inch): 0.0071.
Features
- Capacity: 3/16-3/4"
- TIR (inch): 0.0071
- Mounting Size: 3JT
- Arbor Shank Size: R8
- TIR (inch): 0.0002
- Product Included: One piece of 3/4' Drill Chuck (202-5000); One piece of R8 Arbor (202-1335)
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #25
Shars 3 x 5" Precision Toolmaker CNC Vise .0002" 202-1212 R[
Asin: B07ZP9353K | Model: 202-1212 | PartNumber: 202-1212 | Ean: 0000220212122 | UPC: 000220212122
Body And Jaws Hardened To Rc 58-62.
Square And Parallel To Within .0002".
Precision Ground To A Mirror Finish.
"No-Rise" Jaw Construction Exerts Continual Downward Force, Avoiding The Raise Common To Most Vises.
High Precision One-Piece Steel Construction.
Features
- SKU# 202-1212
- High precision one-piece steel construction
- Body and jaws hardened to Rc 58-62
- No-rise jaw construction exerts continual downward force, avoiding the raise common to most vises
- Square and parallel to within .0002
- Precision ground to a mirror finish
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Dimensions: 2.62 x 7.50 x 3.00 inches
See On Amazon #26
Shars BXA #10 250-210 Knurling Turning and Facing Holder 10-15" 202-9431C P)
Asin: B09F85SD6H | Ean: 0000420294317 | UPC: 000420294317
Height Adjustment Screw Allows To Accommodate Various Center Height Of Different Lathe Chuck.
High Quality 10.9 Grade Galvanized Screws Which Have 1 Time Longer Life Than Others..
Versatile Holder For Turning And Facing As Well As Knurling.
Made Of High Quality Alloy Tool Steel 40Gr Which Is Forged And Has Longer Life, Not Aluminum. Precision Ground And Hardened.
Features
- SKU# 202-9431C
- Made of high quality Alloy tool steel 40Gr which is forged and has longer life, not Aluminum. Precision ground and hardened
- Height adjustment screw allows to accommodate various center height of different lathe chuck
- Versatile holder for turning and facing as well as knurling
- High quality 10.9 grade galvanized screws which have 1 time longer life than others.
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 2.00 Pounds
See On Amazon #27
SHARS 1/2 SINGLE END EDGE CENTER FINDER 202-1785 1\
Asin: B07YZRZ7N2 | Model: 202-1785 | PartNumber: 202-1785 | Ean: 0000120217852 | UPC: 000120217852
Time Saving Positing Tool For Jig Borers, Milling And Other Machines.
Single End.
.500 Tip Diameter; 1/2" Shank.
Locates Edge Quickly-Shoulders, Grooves, Center Points And Scribed Line.
Features
- Hardened and ground on all working surfaces
- Locates edge quickly-shoulders, grooves, center points and scribed line
- Time saving positing tool for jig borers, milling and other machines
- .500 Tip Diameter; 1/2 shank
- Single End
- See more on Amazon...
Brand: Shars | Manufacturer: SHARS
Weight: 0.31 Pounds
See On Amazon #28
Shars Precise Tool Holder Bushings Type "C" 1-1/2" O.D. 3/8" I.D. 202-1626 !)
Asin: B07Z9LDLLB | Ean: 0000120216268 | UPC: 000120216268
Od Tolerance Is Within H6 And Id Tolerance Is Within H7.
Tool Holder Bushing For Universal Use On Cnc Turning Machines To Adapt A Wide Variety Of Boring Bars, Drills, Reamers And Shank Type Tools.
Hardened And Precision Ground To Highest Concentricity.
Outside Diameter: 1-1/2"; Inside Diameter: 3/8".
Features
- Slot Length: 3"; Length Under Head: 3-3/8"
- Outside Diameter: 1-1/2; Inside Diameter: 3/8
- OD tolerance is within H6 and ID tolerance is within H7
- Hardened and precision ground to highest concentricity
- Tool Holder Bushing for universal use on CNC turning machines to adapt a wide variety of boring bars, drills, reamers and shank type tools
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 0.75 Pounds
See On Amazon #29
Shars 2 Piece Machinist Jacks Too 202-9529(2pcs) P[
Asin: B087T5FBW6 | Ean: 0000220295293 | UPC: 000220295293
Made Of Heavy Cast Steel.
Adjustable Screw & Tilting Swivel Head.
Height: 4" When Fully Extended.
Features
- 1" adjustment
- Height: 4 when fully extended
- Made of heavy cast steel
- Adjustable screw & tilting swivel head
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 1.00 Pounds
See On Amazon