Shion.Kwoo - Buying Guide

Bestselling from Shion.Kwoo on Amazon

1. 1 Pc RGBW Mini Button PCB LED Welded with Longer PTFE Cables + 3Pcs Transparent Resin SLA Part LED S...
2. 3D Printer Accessories 5V Voltage 158mm Length VORON 0.1/0.2 Full Color RGB Hard Light Strip WS2812B...
3. 4Pcs 0.2+0.4+0.6+0.8mm Upgrade 500 High Temperature Wear-Resistant Removable Hardened Steel Nozzle ...
4. Shion.Kwoo Upgraded Textured/Smooth PET+PEI Sheet Spring Steel Build Plate 257x257mm Double Sided Fl...
5. Upgraded NEMA 14 Pancake 1.8 10 Teeth Gears Extruder Stepper Motor Suit for Orbiter Hgxlite Sherpa ...
6. Shion.Kwoo 1PC Resin Flexible Spring Steel Mage Build Plate 231x131mm(9.09X5.16inch) Flex Bed with M...
7. Shion.Kwoo Upgraded Smooth/Textured Ender 3 S1 PEY+ PEI Sheet Spring Steel Build Plate NO-Base 235x2...
8. Shion.Kwoo Upgraded Smooth/Textured Ender 3 S1 PEO+ PEI Sheet Spring Steel Build Plate NO-Base 235x2...
9. Shion.Kwoo Upgraded Voron Tap R8 Probe Kit OptoTap Leveling Sensor for Voron 2.4 R8 / Trident 3D Pri...
10. Shion.Kwoo Upgraded StealthBurner SB Toolhead DIY Project Fasteners Screws Nuts Full Kit for Voron 2...

Features

• 1 Upgraded Version Based on the feedback from many 3D enthusiasts, we upgraded the kit.The kit contains 1*PCB LED welded with Longer PTFE cables+3*Transparent Resin SLA Parts. Only support 5V, Only compatible for Klipper and Stealthburner.
• 2 Good Quality:For PCB Led, PTFE cable is 30AWG,the terminal is pre-made, installed with PH2.0 connector, LED has been welded and the PCB boards are fully connected and can be used directly, and the connection wire is made of PTFE material, which is durable and reliable. We have used many sets of machines and can feel free to buy them.
• 3 Exquisite Prints:For Resin SLA Part, many DIY enthusiasts find it difficult to print a suitable printout. In order to solve this problem, we have made many attempts and finally completed the design and production of this part. This part consists of 3 prints, and the current version has been adapted to thousands of products and matches the Stealthburner SB toolhead Extruder very well, so you can feel free to buy them.
• 4 Note:For Spiders and Octopus, different motherboards are set up in different ways. Before powering on, strictly check whether the pins of the light strip correspond to the motherboard, if the wire is wrong, it may cause a short circuit in the 5V circuit.For more information, please refer to the detailed page. Please contact us directly if you are not sure.
• 5 Commitment:The products are tested before delivery. Due to the long-distance transportation, if you have any questions please feel free to contact us . We will reply within 24 hours.
• See more on Amazon...

Features

• Product Features :Voron 0.1/0.2 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• DIY Configuration :The light color can be customized and controlled, for example, the machine status (working, paused, faulty) can be defined in a specific color, and the print progress ratio can be displayed with the string ratio.This requires some configuration, if necessary, you can contact us.
• Product Parameters : length 158mm, number of lamp beads 10, voltage 5V, segment type XH2.54 3P. Note that this product only contains 2 Pieces RGB light strips, does not include strip fixing model, if necessary, please contact us to obtain it.
• Compatible Model : 158mm length RGB strip light adapts to Voron 0.1 0.2 model, 270mm length RGB strip light adapts to Voron 2.4 Trident model, if you want 270mm please refer to ASIN:B0C77DTTPL
• Commitment : The product is more suitable for mature 3D players, who need to print fixings and debug the configuration by themselves, and have been used in multiple batches of the whole machine, and the scheme is mature. All tested before leaving the factory, if you don't know much or are just getting started, please feel free to contact us.
• See more on Amazon...

Features

• Superior Durability : Made from high-quality hardened steel, the Bambu Lab X1 Upgraded Nozzle is built to last. Its sturdy construction ensures excellent abrasion, heat, and corrosion resistance, making it perfect for high-temperature 3D printing.
• Unmatched Precision : With a smooth inner wall and no burrs, this nozzle offers outstanding precision, with an extruder diameter error of less than 0.02mm. Whether you're printing common filaments or more challenging materials like carbon fiber and fiberglass, the Bambu Lab X1 Upgraded Nozzle provides smooth and accurate extrusion.
• Better Performance : Replacement Hardened Steel Nozzle for Bambu Lab X1 Printer - Easily replace your printer's nozzle with this upgraded version made of hardened steel. It is designed to prevent falling off and reduce the possibility of leakage, while offering improved resistance to wear and tear.
• Generous Quantity : This package comes with 4 pieces of Bambu Lab X1 Upgraded Nozzles (0.2mm +0.4mm+0.6mm+0.8mm), giving you plenty of replacements and ensuring you'll never run out when you need them most. Don't settle for inferior nozzles - choose the Bambu Lab X1 Upgraded Nozzle for quality and performance you can trust.
• Notice :The nozzle is only compatible with this newly developed Bambu hotend not original, please pay attention.Must heat the nozzle before removing preinstalled one, and be sure to tighten nozzle when installing at temp so it doesn't leak
• See more on Amazon...

Features

• 1. High-Quality Materials :As a direct-to-factory seller, we offer an unbeatable combination of affordability, superior quality, and stability. By eliminating the middleman, we provide lower prices without compromising on material excellence. It's crucial to make purchases based on your specific needs and requirements. PET suits lower-temperature prints like PLA, while the PEI side accommodates high-temperature filaments such as PETG, ABS, and Nylon.
• 2. Double-Sided Smooth and Textured Material Design :Explore the dual-sided design with a smooth PET coating for a glossy finish and textured PEI surface for a matte finish. This cost-effective and versatile solution caters to diverse printing needs, providing both smooth and textured options. The stability of double-sided PEI surpasses PET, supported by results from multiple experiments.
• 3. Notes : Utilizing our PET+PEI spring steel sheet is straightforward. Clean the surface with isopropyl alcohol, heat the hotbed, and start printing. After printing, let the platform cool, gently bend the PEI sheet to remove the print. Note the protective film on the smooth surface, which should be removed before use. Consider the nozzle-hotbed distance to prevent scratching the PET film, and remember that PET is consumable and may lose adhesiveness over time.
• 4. Compatibility :Compatible with Bambu Lab A1 X1-Carbon/X1/P1P/P1S. PET side recommended for PLA, TPU, and PETG; PEI side supports PLA, PETG, ABS, TPU, ASA, PVA, PET, PA, PC, etc. Note optimal temperatures and chamber conditions for different filaments. For ABS, consider applying glue on the hotbed for enhanced adhesion.
• 5. Guaranteed Satisfaction : We guarantee the quality and performance of our double-sided textured PET+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system
• See more on Amazon...

Features

• New upgrade design :Impeccable smooth surface, no bumps, no rust and corrosion; optimized gears for precise meshing, no longer squeezing gears to cause misalignment; durable PTFE leads, up to 180 heat resistance; say goodbye to inferior standard rotors, non-demagnetized samarium-cobalt magnetic steel rotors, reduce poor contact rate
• Good performance Compared with the traditional style, the torque is increased by 20%, and the high-quality enameled wire is used, the gears are matched with high precision, and the ultra-high temperature is repeatedly tested, and the stable and continuous work is good.
• Good Adaptability Upgraded NEMA 14 pancake 1.8 10 teeth gears extruder enhanced stepper Motor is adapted to orbiter, hgxlite, sherpa ,sherpa mini ,voron stealthburner, voron stealthburner mini extruder .It can used on Voron 2.4,0.1,0.2 ,CW2 Stealthburner extruder directly,Of course, it can also be used on other suitable 3D printers such as 3pro, Blv, CR10, etc.
• Product List : 1* stepper motor NEMA14 with 10cm leghth wire
• Commitment :The motors have been tested before delivery. The motors are brand new products and have not been used. If you encounter any problems, please feel free to contact us and we will reply to you within 24 hours.
• See more on Amazon...

Features

• 1. Easy to Use :No scraper, reusable after installation, the resin model can be directly removed by bending the flexible steel plate, using imported spring steel, better flatness and durability; The surface of the resin steel build plate is specially brushed to increase the surface viscosity; Thicken the 3M soft sticker to make the magnetic force stronger and should not be dropped.
• 2. Installation Notes :1.Thoroughly clean and dry the build plate before installation.2.Connect the magnet to the plate and allow it to sit for a sufficient period (preferably more than 24 hours) to ensure full seating.3.Install the spring steel plate securely onto the magnetic base.4.Reset the printer's leveling settings to begin printing.
• 3. Compatible Models :The resin flexible build plate, 231x131mm(9.09X5.16inch),compatible with Creality Halot Mage, Mage Pro Resin SLA 3D Printer.For the suitable models not mentioned, please measure in advance before purchasing, or you can contact us at any time.
• 4. Packing List : 1 piece resin flexible build plate + 1 piece magnetic sticker base.There is a transparent protective film on the surface, which needs to be torn off before use, and washed and dried with cleaning agents such as alcohol.
• 5. Commitment :We have our own factory, directly serve consumers, and strictly test all products before leaving the factory. Considering the long-distance transportation, if there are any quality problems, please feel free to contact us, we will reply promptly within 12 hours within one working day, and solve it for you.
• See more on Amazon...

Features

• Product Features :For the PEY+PEI sheet, the PEY shows a vibrant & rainbow-like array of colors, along with a celestial starry pattern. Through this dual presentation, the print surface becomes dazzling, allowing even monochromatic materials to exhibit a colorful and enchanting effect. The PEY supports temp up to 180 C, making it ideal for low-temp filaments like PLA. Our PEI provides a delicate matte texture, exuding a calm and stable quality, with high-temp resistance up to 300 C.
• Premium Materials :In addition to procuring thick PEY film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly, especially for Newer. We have extensively tested and verified the results on various machines.
• Usage Guidelines : Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcohol or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the rainbow starry pattern on the PEY surface. In extreme conditions such as humid filaments, intricate models, or high-speed printing, adjusting print speed and increasing bed temp are recommended based on our experience.
• Compatibility : 235x235mm, Compatible with Creality Ender 5 S1/Creality K1/Ender 3 S1/Ender 3/Ender 3 Pro/Ender 3 V2/CP-01/Cr-20/Cr 20 Pro/Voxelab Aquila 3D Printers.If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
• Our Promise : We guarantee the quality and performance of our double-sided textured PEY+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
• See more on Amazon...

Features

• Product Features : For the PEO+PEI build plate, the PEO side presents a diamond pattern, showcasing the intersection of gloss and matte surfaces to create a diamond texture, elevating the print surface with sophistication. Capable of supporting temperatures up to 150 C, it's ideal for users working with low-temp filaments like PLA and PETG. Our in-house developed PEI coating exhibits a delicate matte texture, exuding a calm and stable demeanor, with an impressive high-temp filaments.
• Premium Materials : In addition to sourcing thickened PEO film and our proprietary high-viscosity PEI formula, our choice of a 0.4mm thick stainless steel plate ensures resistance to deformation and rust, maintaining high flatness and ample resilience. With excellent adhesion, it's incredibly user-friendly for new users. We've repeatedly tested and validated the results.
• Usage Guidelines : Pay attention to the nozzle-to-surface distance to prevent scratches that could leave permanent marks. Regularly clean the surface with alcohol or a cleaning agent, as dirt and oil can reduce print adhesion and affect the clarity of the diamond pattern on the PEO surface. In extreme conditions, such as humid filaments, complex models, our practical experience suggests lowering print speed, increasing bed temperature, and optimizing filament and chamber temperature.
• Compatibility : Size 235x235mm, Compatible with Creality Ender 5 S1/Creality K1/Ender 3 S1/Ender 3/Ender 3 Pro/Ender 3 V2/CP-01/Cr-20/Cr 20 Pro/Voxelab Aquila 3D Printers.. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
• Our Promise : We guarantee the quality and performance of our double-sided textured PEO+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
• See more on Amazon...

Features

• 1. NOTICE :We found that 2 small gaskets are missing in some packages. We would like to provide you with an "STL file" so that you can print them yourself for 10 minutes.If you mind, please do not buy it, thank you.Our black version of the R8 Tap probe kit offers an upgrade package with high-quality printed parts made of high-grade ABS material. This excellent ABS material has excellent heat resistance and strength, and eliminates additional printing steps, saving you costs.
• 2. Fast/Precise Probing :The R8 Tap Kit excels in bed surface probing, outpacing the Klicky Probe in speed and saving valuable time during bed leveling. Utilizing a precision-machined probe, it prevents deflection during the probing process, ensuring highly accurate measurement results. In contrast, the Klicky Probe, with its plastic tip, comes at a lower cost but may experience slight deflection, affecting measurement accuracy. If you consider the Klicky Probe please refer B0BG7CGZBC
• 3. Enhanced Versatility :The R8 Tap Kit demonstrates superior performance on a broader range of surfaces, especially those that are transparent or reflective, where the Klicky Probe might encounter challenges. Moreover, the Tap Kit maintains consistent probing force throughout, delivering more consistent results across the entire build platform.
• 4. Upgraded Version with Enhanced Features :The R8 version of the Tap Probe Kit introduces numerous upgrades, including the addition of multiple fuses to limit over-current during hot swapping and voltage spikes caused by damping surge current. Additionally, features like the reverse polarity protection diode and increased inductor size to prevent coil saturation enhance stability and safety, providing you with a more reliable and secure user experience.
• 5. Quality Assurance and Swift Response :All our products undergo rigorous testing before leaving the factory and have been successfully integrated into multiple machine setups, proving the maturity and reliability of our solution. If you encounter any issues during use, please feel free to contact us. We guarantee a rapid response within 24 hours to ensure your satisfaction.
• See more on Amazon...

Features

• High Quality : The accessories of Stealthburner Extruder fastener screws nuts kit use high quality raw materials, high hardness and corrosion resistance.
• Mature Scheme : We have assembled several batches of Stealthburner Extruder toolhead through this scheme, which is very mature and meets the official building standards, so you can purchase with confidence.
• Product List : For the product list, please refer to the details page. Note:there is no M3 washer inside, you need to prepare it if you want.
• Easy to Install : You can install it according to the official instructions, which is simple and convenient.
• Note : Thank you very much for purchasing this set of accessories. We use multiple manual and machine checks to ensure accuracy. Although it takes a lot of effort, it is well worth it. If there is a problem with the product you received, please contact us in time and we will solve it for you as soon as possible.
• See more on Amazon...

Features

• High Quality : The accessories of Klicky Probe fastener screws nuts kit use high quality raw materials, high hardness and corrosion resistance.
• Mature Scheme : We have assembled several batches of Voron 2.4 3D printers with this kit, which is very mature and meets the building standards, so you can purchase with confidence.
• Product List : For the product list, please refer to the details page.
• Easy to Install : You can install it according to the official instructions, which is simple and convenient.
• - Note : Thank you very much for purchasing this set of accessories. We use multiple manual and machine checks to ensure accuracy. Although it takes a lot of effort, it is well worth it. If there is a problem with the product you received, please contact us in time and we will solve it for you as soon as possible.
• See more on Amazon...

Features

• 1.High-quality Cables: Use upgraded PTFE cables instead of conventional cables. More durable, more reliable.
• 2.Upgraded Welded LED: RGBW Mini Button PCB LED Light Strip Installed with PTFE Cable, pre-welded and ready to use. Very convenient, simplify the installation process.
• 3.Upgrade BMG kit: Upgrade BMG wheels to high hardness wheels instead of traditional ones; Upgrade hand screw to CNC version.
• 4. Mature Solution: We have used this kit in thousands of Voron 2.4 Trident 3D Printers, and it has greatly improved machine stability and installation. Please refer to details page for kit packing list. This kit includes fan and blower.
• 5.Commitment: Each set of products are tested before delivery, but the quantity is large, the variety is many, the transportation distance is far, very few will inevitably encounter the lack of parts, if you have any problems, you can directly contact us, we will reply to you within 24 hours.
• See more on Amazon...

Features

• PCB Compatibility : Compatible with Voron 2.4 Stealthburner toolhead extruder. The Voron SB Stealthburner toolhead PCB is the latest version available for the new StealthBurner extruder and CW2, which makes wiring the extruder tool head easier and easier to maintain.
• Easy to use : Fully soldered and ready to use! micro-fit type connector for heater and thermistor (direct compatibility with Revo and Rapido) support for the new RGBW LEDs the ERCF filament sensor a plug-in external chamber themistor,input for the new 5015 blower parts cooling fan and the 4010 extruder fan.
• Specifications : Product List: Stealthburner_Toolhead_Split_PCB*2
• Upgraded Version : Split Cw2 stealthburner PCB borad design, make it more convenient to install and magage the cables without taking apart all the wires.
• Commitment : The product has been tested before sale. Each tool head is suitable for different PCB boards, and the wiring diagrams for connecting to different motherboards are also different. If you have any problems with the products you receive, please contact us directly in the background.We will reply within 24 hours and promise to replace it for you.
• See more on Amazon...

Features

• Upgraded Material : 6 pieces of cost-effective upgrade, using imported double-sided coated PET film, the thickness is only 0.1mm, the light transmittance is as high as 95%, and it supports ultraviolet penetration at a wavelength of 405mm, which does not affect the accuracy of the printer.Customized development of real printer sizes to avoid size and hole position errors, and perfectly adapt to your printer.
• Product Features : This product is a screen protective film. The main function is to prevent the FEP or nfep film from being damaged. When the resin overflows, it will damage and contaminate the screen, causing damage to the screen. Maximize the service life of the LCD screen and reduce the cost of use and maintenance.
• Suitable Models : This package includes 6 pieces of screen protector + cleaning sheet + installation scraper; this product is suitable for ELEGOO Saturn S, Photon Mono X2 Resin 3D Printer.
• Installation Instructions : 1.Use alcohol tablets and cleaning sheet to clean the screen, make sure there is no dust, and keep it dry.2.Tear off the back film of this product,adjust the installation angle, and slowly cover the screen from one side. During the covering process, you need to use a scraper to remove air bubbles at the same time until the protective film covers the entire screen.3.Tear off the first layer of the protective film and make sure there are no air bubbles.4.After re-leveling, start testing printing.
• After-sales Service : Please note that during the film process, some very small air bubbles may be left behind. Please try to make sure that the air bubbles are around the screen, which will not affect your printing effect.If you have any quality and size problems, please contact us as soon as possible, and we will provide you with 7x24 hours after-sales service.
• See more on Amazon...

Features

• 1. Product Features :For the PEY+PEI sheet, the PEY shows a vibrant & rainbow-like array of colors, along with a celestial starry pattern. Through this dual presentation, the print surface becomes dazzling, allowing even monochromatic materials to exhibit a colorful and enchanting effect. The PEY supports temp up to 180 C, making it ideal for low-temp filaments like PLA. Our PEI provides a delicate matte texture, exuding a calm and stable quality, with high-temp resistance up to 300 C.
• 2. Premium Materials :In addition to procuring thick PEY film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly, especially for Newer. We have extensively tested and verified the results on various machines.
• 3. Usage Guidelines : Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcohol or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the rainbow starry pattern on the PEY surface. In extreme conditions such as humid filaments, intricate models, or high-speed printing, adjusting print speed and increasing bed temp are recommended based on our experience.
• 4. Compatibility :Compatible with Anycubic Kossel Plus Delta 3D Printers.. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
• 5. Our Promise : We guarantee the quality and performance of our double-sided textured PEY+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
• See more on Amazon...

Features

• High Quality : Use box packaging instead of simple bag packaging, well distinguish all kinds of screws; box surface affixed with the type and quantity of accessories label, easy to find; accessories of high quality, corrosion resistance, high hardness.
• Mature Scheme : We have assembled several batches of Voron Trident 3D printers through this scheme, which is very mature and meets the official building standards, so you can purchase with confidence.
• Product List : This product contains all the accessories for assembling Voron Trident 3D Printer. For details, please refer to the details page. The product picture and quantity will be marked on the box.
• Note : Thank you very much for purchasing this set of accessories. There are many kinds and quantities of accessories. We use multiple manual and machine checks to ensure accuracy. Although it takes a lot of effort, it is well worth it. If there is a problem with the product you received, please contact us in time and we will solve it for you as soon as possible.
• Others :If you still need to buy accessories other than this kit, you can also contact us directly.
• See more on Amazon...

Features

• High Quality : The accessories of Voron Octopus Motherboard Electronics Wiring Cables Kit SB Stealthburner PCB Cable + X/Y/Z Axis Endstop Limit Switch PCB Cables (PTFE) Set for Voron 2.4 3D Printer (350 mm Version use high quality raw materials, high hardness and corrosion resistance.
• Mature Scheme :This kit is suitable for octopus motherboard 350mm version, not for spider motherboard. It contains Stealthburner SB Cables , not the Afterburner. We have assembled several batches of Voron 2.4 3D printers with this kit, which is very mature and meets the building standards, so you can purchase with confidence.
• Easy to Install : You can install it according to the official instructions, which is simple and convenient. Note:If you need x/y axis and Z axis endstop print files, Please contact us to send you the corresponding ones.
• Product List :1Pcs* Stealthburner PCB Cable + 1Pcs*X/Y/Z Axis Endstop Limit Switch Cables (PTFE) +1Pcs*LED Cables
• Note : Thank you very much for purchasing this set of accessories. We use multiple manual and machine checks to ensure accuracy. Although it takes a lot of effort, it is well worth it. If there is a problem with the product you received, please contact us in time and we will solve it for you as soon as possible.
• See more on Amazon...

Features

• Product Features :Voron V0/0.1/2 OLED LCD display supports full-color RGB light function, the color is very cool, enhance the sense of atmosphere. The light color can be customized and controlled, for example, the machine status (working, paused, faulty) can be defined in a specific color.
• Upgrade Design :Upgrade design, smaller size, USB link, on-board MCU, plug and play, do not affect the original appearance. The use of high-quality raw materials enhances the damping feeling of the knob, so that the operation feels better. External physical adjustment function, 1. Rotation stands for Select, 2. Press for OK.3.The system shuts down immediately after the panic button is physically pressed.
• Compatible Models : Compatible with Voron 0 V0.1 V0.2 models, suitable for Raspberry Pi/Gemini, 0.5m cable will be included with the display in product listing, no need to purchase separately.
• Note : Voron V0/0.1/2 OLED LCD display only supports Klipper system, this display must be connected to the host computer through USB, such as Raspberry Pi. For installation instructions, please refer to the details page.
• Commitment : The product is more suitable for mature 3D players, who need to print fixings and debug the configuration by themselves, and have been used in multiple batches of the whole machine, and the scheme is mature. All tested before leaving the factory, if you don't know much or are just getting started, please feel free to contact us.
• See more on Amazon...

Features

• Product Features : For the PET+PEI steel plate, the PET surface exhibits a pattern resembling carbon fiber. The intersection of gloss and matte surfaces forms a striped pattern, creating a three-dimensional and orderly print surface with a distinctive texture. It can withstand temperatures up to 120 C, making it ideal for low-temp filaments like PLA and PETG. The PEI coating presents a delicate matte texture, exuding a calm and stable quality for ABS, with a high-temp resistance of up to 300 C.
• Premium Materials : In addition to acquiring thick PET film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly. We have extensively tested and verified the results on various machines.
• Usage Guidelines : Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcohol or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the carbon fiber-like pattern on the PET surface. In extreme conditions such as humid filaments, intricate models, or high-speed printing, adjusting speed and increasing bed temp are recommended
• Compatibility :Compatible with Creality Ender 5 S1/Creality K1/Ender 3 S1/Ender 3/Ender 3 Pro/Ender 3 V2/CP-01/Cr-20/Cr 20 Pro/Voxelab Aquila 3D Printers. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.on.
• Our Promise : We guarantee the quality and performance of our double-sided textured PET+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
• See more on Amazon...

Features

• 1 Heater Cartridge Parameters Power-24V 65W,Cable Length-150mm,The maximum temperature tested can reach 500 and it can work stably at 450 Cartridge Size- 6mm 15mm Stainless steel shell and glass fiber wire enhance product service life.
• 2 Thermistor Parameters Cable Length-150mm,The normal temperature tested can be from -40 to 500 ,Cartridge Size- 3mm 15mm,generally suitable for Voron 3D Printers using klipper firmware, especially suitable for Voron 2.4/0.1 3D printers.
• 3 Wide Applicability This kit of 3D printer Cartridge Heater and Thermistor is intended for VORON 3d printers, the heater has wide adaptability and can be used for PT100 Dragon Hotend/Dragonfly BMS BMO/ Red lizard Hotend and all V6 hotends.
• 4 Note: The maximum temperature of thermistor cannot exceed 300 If you want to print PETG,ABS, you need to choose another thermal instead. The connection ports of some 3D printers may be different, please read the product parameters in detail before purchasing.
• 5 Commitment:The kit contains 1*Cartridge Heater+1*Thermistor Temperature Sensor.The products are tested before delivery. Due to the long-distance transportation, if you have any questions please feel free to contact us . We will reply within 24 hours.
• See more on Amazon...

Features

• Product Features :For the PEY+PEI sheet, the PEY shows a vibrant & rainbow-like array of colors, along with a celestial starry pattern. Through this dual presentation, the print surface becomes dazzling, allowing even monochromatic materials to exhibit a colorful and enchanting effect. The PEY supports temp up to 180 C, making it ideal for low-temp filaments like PLA. Our PEI provides a delicate matte texture, exuding a calm and stable quality, with high-temp resistance up to 300 C.
• Premium Materials :In addition to procuring thick PEY film and our proprietary high-adhesion PEI formula, we use a 0.4mm thick stainless steel plate that is resistant to deformation and rust. With high flatness and ample toughness, it provides strong adhesion, making it extremely user-friendly, especially for Newer. We have extensively tested and verified the results on various machines.
• Usage Guidelines : Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcohol or a cleaning agent is recommended to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the rainbow starry pattern on the PEY surface. In extreme conditions such as humid filaments, intricate models, or high-speed printing, adjusting print speed and increasing bed temp are recommended based on our experience.
• Compatibility :Size 250x250mm for Voron 2.4 V2 250, Ankermake M5 3D Printer.If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
• Our Promise : We guarantee the quality and performance of our double-sided textured PEY+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
• See more on Amazon...

Features

• VORON 2.4 Trident 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• See more on Amazon...

Features

• High Quality : The kit adopts high-quality raw materials, and the accessories are rich and complete.
• Upgrade advantage : The hand screw has been upgraded to CNC process, and the 2 BMG wheels have been upgraded to hardened steel.
• Easy installation : Voron BMG extruder kit is customized for Voron, easy to install and easy to operate.
• Product List : 1*set of accessories, please refer to the picture for details.
• Commitment : If you have any questions, please feel free to contact us, we will reply you within 24 hours.
• See more on Amazon...

Features

• VORON 2.4 Trident 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• See more on Amazon...

Features

• Voron 0.1/0.2 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• See more on Amazon...

Features

• VORON 2.4 Trident 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• See more on Amazon...

Features

• Voron 0.1/0.2 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• The light color can be customized and controlled, for example, the machine status (working, paused, faulty) can be defined in a specific color, and the print progress ratio can be displayed with the string ratio.This requires some configuration, if necessary, you can contact us.
• length 158mm, number of lamp beads 10, voltage 5V, segment type XH2.54 3P. Note that this product only contains 2 Pieces RGB light strips, does not include strip fixing model, if necessary, please contact us to obtain it.
• Based on the feedback from many 3D enthusiasts, we upgraded the kit.The kit contains 1*PCB LED welded with Longer PTFE cables+3*Transparent Resin SLA Parts. Only support 5V, Only compatible for Klipper and Stealthburner.
• For PCB Led, PTFE cable is 30AWG,the terminal is pre-made, installed with PH2.0 connector, LED has been welded and the PCB boards are fully connected and can be used directly, and the connection wire is made of PTFE material, which is durable and reliable. We have used many sets of machines and can feel free to buy them.
• See more on Amazon...

Features

• Use box packaging instead of simple bag packaging, well distinguish all kinds of screws; box surface affixed with the type and quantity of accessories label, easy to find; accessories of high quality, corrosion resistance, high hardness.
• We have assembled several batches of Voron Trident 3D printers through this scheme, which is very mature and meets the official building standards, so you can purchase with confidence.
• VORON 2.4 Trident 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• The light color can be customized and controlled, for example, the machine status (working, paused, faulty) can be defined in a specific color, and the print progress ratio can be displayed with the string ratio.This requires some configuration, if necessary, you can contact us.
• length 270mm, number of lamp beads 18, voltage 5V, segment type XH2.54 3P. Note that this product only contains 2 Pieces RGB light strips, does not include strip fixing model, if necessary, please contact us to obtain it.
• See more on Amazon...

Features

• Voron 0.1/0.2 3D printer full-color hard light bar adopts 5v voltage, supports lighting, color light, gradient and marquee 4 modes. While improving the printing lighting effect, you can also customize a variety of color light modes to make the printer cool and different;
• The light color can be customized and controlled, for example, the machine status (working, paused, faulty) can be defined in a specific color, and the print progress ratio can be displayed with the string ratio.This requires some configuration, if necessary, you can contact us.
• length 158mm, number of lamp beads 10, voltage 5V, segment type XH2.54 3P. Note that this product only contains 2 Pieces RGB light strips, does not include strip fixing model, if necessary, please contact us to obtain it.
• The accessories of Klicky Probe fastener screws nuts kit use high quality raw materials, high hardness and corrosion resistance.
• We have assembled several batches of Voron 2.4 3D printers with this kit, which is very mature and meets the building standards, so you can purchase with confidence.
• See more on Amazon...

Features

• 1 Pcs RGBW Mini Button PCB LED Welded with PTFE Cables
• 3PcsTransparent Resin SLA Part LED Shade Shell kit
• Upgraded 2PCS Split Stealthburner CW2 Extruder SB Toolhead PCB Board Cable Management for VORON2.4 V2.43D Printer.
• See more on Amazon...