Small Parts - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling from Small Parts on Amazon
- Small Parts 18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right Hand Threads
- Ceramic Ring Magnets, 1.75" Outer Diameter, 0.865" Inner Diameter, 0.225" Thick (Pack of 2)
- Aluminum Crimping Loop Sleeve for 1/8" Diameter Wire Rope and Cable, (Pack of 100)
- Steel Hex Nut, Hot-Dipped Galvanized Finish, Grade 2, ASME B18.2.2, 1/2"-13 Thread Size, 3/4" Width ...
- Small Parts Steel Flat Washer, Zinc Yellow Chromate Plated Finish, Grade 8, ASME B18.22.1, 1/2" Scre...
- Small Parts 31WSAEBPK Steel Flat Washer, Black Oxide Finish, ASME B18.22.1, 5/16" Screw Size, 11/32"...
- Small Parts Steel Flat Washer, Zinc Yellow Chromate Plated Finish, Grade 8, ASME B18.22.1, 5/8" Scre...
- Small Parts FSC50HN8Y High-Strength Steel Hex Nut, Grade 8, 1/2"-13" Thread Size (Pack of 50)
- Small Parts Steel Flat Washer, Plain Finish, ASME B18.22.1, 1/4" Screw Size, 9/32" ID, 5/8" OD, 0.06...
- Small Parts FSC38HNZ Steel Hex Nut, Zinc Plated Finish, Grade 2, ASME B18.2.2, 3/8"-16 Thread Size, ...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Small Parts 18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right Hand Threads
Asin: B00G3PEUD4 | Model: B00G3PEUD4 | PartNumber: B00G3PEUD4
Made Of 18-8 Stainless Steel For Corrosion Resistance.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.38 x 36.00 x 0.38 Inches | Weight: 0.90 Pounds
See On Amazon #2
Ceramic Ring Magnets, 1.75" Outer Diameter, 0.865" Inner Diameter, 0.225" Thick (Pack of 2)
Asin: B005HY90KA | Ean: 0095421072880 | UPC: 095421072880
Features
- One Pole is located on one flat face and the opposite Pole on the opposite flat face.
- See more on Amazon...
First Available: 03/12/2017
Brand: Small Parts | Manufacturer: Magnet Source
Dimensions: 4.87 x 0.76 x 2.87 Inches
See On Amazon #3
Aluminum Crimping Loop Sleeve for 1/8" Diameter Wire Rope and Cable, (Pack of 100)
Asin: B0015HKVTM | Model: MCC-A125 | PartNumber: MCC-A125
Working Indoors Or Outdoors Both Are Fine, Even In A High Salt Environment As It’S Made Of Aluminum..
They Are Great To Work On 1/8" Stainless Steel Cable Array For Deck Railing, Properly Crimped It Will Support 200Lb Load..
These Crimping Sleeves Fit For Dog Leashes, Clothes Lines Or Anything Else That Require Strong Cable, Can Meet Your Different Needs In Daily Life..
Easy To Use: Aluminum Crimping Loop Sleeves Are Easy To Use, Without Effort, Just Lock Both Ends Of The Guide Wire By Vise, Pliers Or Compression Tools..
Features
- Fit for for steel wire rope diameter in 3.2 mm/ 1/8 inch.
- Easy to use: Aluminum crimping loop sleeves are easy to use, without effort, just lock both ends of the guide wire by vise, pliers or compression tools.
- Working indoors or outdoors both are fine, even in a high salt environment as it s made of aluminum.
- These crimping sleeves fit for dog leashes, clothes lines or anything else that require strong cable, can meet your different needs in daily life.
- They are great to work on 1/8 stainless steel cable array for deck railing, properly crimped it will support 200lb load.
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 Pounds
See On Amazon #4
Steel Hex Nut, Hot-Dipped Galvanized Finish, Grade 2, ASME B18.2.2, 1/2"-13 Thread Size, 3/4" Width Across Flats, 7/16" Thick (Pack of 50)
Asin: B009EE5V84 | Model: FSC12HNG | PartNumber: FSC12HNG
Hot-Dipped Galvanized Finish Offers Excellent Corrosion Resistance.
Meets Asme B18.2.2 Specifications.
Grade 2 Steel Is Often Used In Applications Where Toughness Is The Primary Consideration.
Features
- Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
- Grade 2 steel is often used in applications where toughness is the primary consideration
- Hot-dipped galvanized finish offers excellent corrosion resistance
- Meets ASME B18.2.2 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.44 x 0.00 x 0.75 Inches | Weight: 0.00 Pounds
See On Amazon #5
Small Parts Steel Flat Washer, Zinc Yellow Chromate Plated Finish, Grade 8, ASME B18.22.1, 1/2" Screw Size, 17/32" ID, 1-1/16" OD, 0.135" Thick (Pack of 50)
Asin: B009OKFRKU | Model: B009OKFRKU | PartNumber: B009OKFRKU
Zinc Yellow-Chromate Plating Offers Good Corrosion Resistance.
Meets Asme B18.22.1 Specifications.
Grade 8 Steel Is Stronger Than Grade 5 Steel And Often Used In Applications Where Strength Is The Primary Concern.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary concern
- Zinc yellow-chromate plating offers good corrosion resistance
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.86 pounds
See On Amazon #6
Small Parts 31WSAEBPK Steel Flat Washer, Black Oxide Finish, ASME B18.22.1, 5/16" Screw Size, 11/32" ID, 11/16" OD, 0.065" Thick (Pack of 100)
Asin: B009OJHUKG | Model: 31WSAEBPK | PartNumber: 31WSAEBPK
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Meets Asme B18.22.1 Specifications.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.51 Pounds
See On Amazon #7
Small Parts Steel Flat Washer, Zinc Yellow Chromate Plated Finish, Grade 8, ASME B18.22.1, 5/8" Screw Size, 21/32" ID, 1-5/16" OD, 0.135" Thick (Pack of 25)
Asin: B009OKFW5U | Model: B009OKFW5U | PartNumber: B009OKFW5U
Zinc Yellow-Chromate Plating Offers Good Corrosion Resistance.
Meets Asme B18.22.1 Specifications.
Grade 8 Steel Is Stronger Than Grade 5 Steel And Often Used In Applications Where Strength Is The Primary Concern.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary concern
- Zinc yellow-chromate plating offers good corrosion resistance
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 Pounds
See On Amazon #8
Small Parts FSC50HN8Y High-Strength Steel Hex Nut, Grade 8, 1/2"-13" Thread Size (Pack of 50)
Asin: B0767LJXPV | Model: FSC50HN8Y | PartNumber: FSC50HN8Y
Height: 7/16 Inch.
High-Strength Steel Hex Nut, Grade 8, Zinc Yellow-Chromate Plated, 1/2"-13" Thread Size (Pack Of 50).
Thread Size: 1/2''-13.
Features
- Material: steel
- Thread size: 1/2''-13
- Height: 7/16 inch
- High-Strength Steel Hex Nut, Grade 8, Zinc Yellow-Chromate Plated, 1/2-13 Thread Size (Pack of 50)
- See more on Amazon...
Brand: Small Parts | Manufacturer: Fastcom Supply
Dimensions: 42932.00 x 1.00 x 42798.00 Inches | Weight: 1.01 Pounds
See On Amazon #9
Small Parts Steel Flat Washer, Plain Finish, ASME B18.22.1, 1/4" Screw Size, 9/32" ID, 5/8" OD, 0.065" Thick (Pack of 100)
Asin: B009OJIH7G | Model: B009OJIH7G | PartNumber: B009OJIH7G | Ean: 7336117820099, 7844908501084
Plain Surface Has No Finish.
Meets Asme B18.22.1 Specifications.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Steel is often used in applications where strength is the primary consideration
- Plain surface has no finish
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 Pounds
See On Amazon #10
Small Parts FSC38HNZ Steel Hex Nut, Zinc Plated Finish, Grade 2, ASME B18.2.2, 3/8"-16 Thread Size, 9/16" Width Across Flats, 21/64" Thick (Pack of 100)
Asin: B009EE3XU2 | Model: FSC38HNZ | PartNumber: FSC38HNZ
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Meets Asme B18.2.2 Specifications.
Grade 2 Steel Is Often Used In Applications Where Toughness Is The Primary Consideration.
Features
- Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
- Grade 2 steel is often used in applications where toughness is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Meets ASME B18.2.2 specifications
- See more on Amazon...
First Available: 11/25/2017
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.33 x 0.00 x 0.56 Inches | Weight: 1.46 Pounds
See On Amazon #11
Small Parts 37203W Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type 23, 3/8"-16 Thread Size, 1-1/4" Length (Pack of 10)
Asin: B00GWYPI3W | Model: 37203W | PartNumber: 37203W
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Hex Washer Head Has A Flange For Additional Grip With The Mating Surface And Has Six Flat Sides That A Wrench Can Grip To Turn From The Side.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side
- See more on Amazon...
First Available: 11/25/2017
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.25 x 0.00 Inches | Weight: 0.00 pounds
See On Amazon #12
Small Parts M410D7985AB Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #2 Phillips Drive, M4-0.7 Thread Size, 10 mm Length, Fully Threaded, Import (Pack of 100)
Asin: B00F33UIJ2 | Model: M410D7985AB | PartNumber: M410D7985AB | Ean: 7147905852525
The Package Width Is 9.652 Centimeters.
Package Weight : 0.159 Kilograms.
The Package Height Is 11.684 Centimeters.
Features
- The package length is 1.524 centimeters
- The package height is 11.684 centimeters
- The package width is 9.652 centimeters
- Package Weight : 0.159 kilograms
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 10.00 x 0.00 Inches | Weight: 0.00 pounds
See On Amazon #13
Small Parts Steel Flat Washer, Hot-Dipped Galvanized Finish, ASTM F436 Type 1, 1/2" Screw Size, 17/32" ID, 1-1/16" OD, 0.135" Thick (Pack of 50)
Asin: B009OKKQ9M | Model: FSC12FW436G | PartNumber: FSC12FW436G
Hot-Dipped Galvanized Finish Offers Excellent Corrosion Resistance.
Meets Astm F436 Type 1 Specifications.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Steel is often used in applications where strength is the primary consideration
- Hot-dipped galvanized finish offers excellent corrosion resistance
- Meets ASTM F436 Type 1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 pounds
See On Amazon #14
007 Silicone O-Ring, 70A Durometer, Red, 5/32" ID, 9/32" OD, 1/16" Width (Pack of 100)
Asin: B000FN0WYG | Model: 007 | PartNumber: 007
Round In Cross-Section To Provide A Seal Between Cylindrical Overlapping Surfaces.
Meets Standards Defined By Aerospace Standard As568a.
Durometer (Hardness) Of 70A For Resistance To Penetration.
Can Be Used Across A Wide Temperature Range From -65 Degrees F (-54 Degrees C) To 450 Degrees F (232 Degrees C).
Features
- Made of silicone for use with a variety of chemicals and fluids
- Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
- See more on Amazon...
Brand: Mr O-Ring | Manufacturer: Small Parts
See On Amazon #15
Small Parts 7528WF188 18-8 Stainless Steel Flat Washer, Plain Finish, 3/4" Hole Size, 13/16" ID, 1-3/4" OD, 0.105" Nominal Thickness (Pack of 25)
Asin: B009OJMSKS | Model: 7528WF188 | PartNumber: 7528WF188
Plain Surface Has No Finish.
Country Of Origin: China.
18-8 Stainless Steel Provides Good Corrosion Resistance And Strength.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- 18-8 stainless steel provides good corrosion resistance and strength
- Plain surface has no finish
- Country of origin: China
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
See On Amazon #16
Small Parts M6D125A188B 18-8 Stainless Steel Flat Washer, Black Oxide Finish, Meets DIN 125, M6 Hole Size, 6.4mm ID, 12mm OD, 1.6mm Nominal Thickness (Pack of 100)
Asin: B009OK2AZK | Model: M6D125A188B | PartNumber: M6D125A188B
Black Oxide Finish Offers Additional Corrosion Resistance And Lubricity.
Meets Din 125 Specifications.
18-8 Stainless Steel Provides Good Corrosion Resistance And Strength.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- 18-8 stainless steel provides good corrosion resistance and strength
- Black oxide finish offers additional corrosion resistance and lubricity
- Meets DIN 125 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
See On Amazon #17
Small Parts Steel Flat Washer, Zinc Yellow Chromate Plated Finish, Grade 8, ASME B18.22.1, 9/16" Screw Size, 5/8" ID, 1-1/2" OD, 0.11" Thick (Pack of 25)
Asin: B009OKEWLU | Model: B009OKEWLU | PartNumber: B009OKEWLU | Ean: 7147905869431
Zinc Yellow-Chromate Plating Offers Good Corrosion Resistance.
Meets Asme B18.22.1 Specifications.
Grade 8 Steel Is Stronger Than Grade 5 Steel And Often Used In Applications Where Strength Is The Primary Concern.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary concern
- Zinc yellow-chromate plating offers good corrosion resistance
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 Pounds
See On Amazon #18
Small Parts 08WSAEPK Steel Flat Washer, Zinc Plated Finish, ASME B18.22.1, No. 8 Screw Size, 3/16" ID, 7/16" OD, 0.049" Thick (Pack of 100)
Asin: B009OJG5RK | Model: 08WSAEPK | PartNumber: 08WSAEPK
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Meets Asme B18.22.1 Specifications.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.10 Pounds
See On Amazon #19
222 Silicone O-Ring, 70A Durometer, Red, 1-1/2" ID, 1-3/4" OD, 1/8" Width (Pack of 10)
Asin: B000FMYSVK | Model: 222 | PartNumber: 222
Round In Cross-Section To Provide A Seal Between Cylindrical Overlapping Surfaces.
Meets Standards Defined By Aerospace Standard As568a.
Durometer (Hardness) Of 70A For Resistance To Penetration.
Can Be Used Across A Wide Temperature Range From -65 Degrees F (-54 Degrees C) To 450 Degrees F (232 Degrees C).
Features
- Made of silicone for use with a variety of chemicals and fluids
- Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
- See more on Amazon...
Brand: Mr O-Ring | Manufacturer: Small Parts
See On Amazon #20
Small Parts 1012ABPPB Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4" Length (Pack of 100)
Asin: B00GI8BB6U | Model: 1012ABPPB | PartNumber: 1012ABPPB
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration, And The Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Features
- Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
- Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.75 x 0.00 Inches
See On Amazon #21
Small Parts Steel Self-Drilling Screw, Zinc Plated Finish, Hex Washer Head, External Hex Drive, Sealing, Includes Washer, 1-1/4" Length, #10-16 Threads (Pack of 100)
Asin: B000MS6X9M | Model: FSCHWESD-10-20 | PartNumber: FSCHWESD-10-20
Hex Head For Easy Driving.
Length Is Measured From Under The Head.
Zinc Plated Steel Fasteners Are Suitable Where Strength And Corrosion Resistance Are Primary Considerations.
Features
- Create their own threads when driven into material
- Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
- Hex head for easy driving
- Length is measured from under the head
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.25 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #22
Small Parts Steel Flat Washer, Black Oxide Finish, ASME B18.22.1, 1/2" Screw Size, 17/32" ID, 1-1/16" OD, 0.095" Thick (Pack of 50)
Asin: B009OJI0XC | Model: B009OJI0XC | PartNumber: B009OJI0XC
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Meets Asme B18.22.1 Specifications.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Meets ASME B18.22.1 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 Pounds
See On Amazon #23
218 Buna-N O-Ring, 70A Durometer, Black, 1-1/4" ID, 1-1/2" OD, 1/8" Width (Pack of 100)
Asin: B000FN0WKK | Model: 218 | PartNumber: 218
Round In Cross-Section To Provide A Seal Between Cylindrical Overlapping Surfaces.
Meets Standards Defined By Aerospace Standard As568a.
Durometer (Hardness) Of 70A For Resistance To Penetration.
Can Be Used Across A Wide Temperature Range From -30 Degrees F (-34 Degrees C) To 250 Degrees F (121 Degrees C).
Features
- Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons
- Can be used across a wide temperature range from -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
- See more on Amazon...
Brand: Mr O-Ring | Manufacturer: Small Parts
See On Amazon #24
Small Parts M12D125A Steel Flat Washer, Zinc Plated Finish, DIN 125, Metric, M12 Screw Size, 13 mm ID, 24 mm OD, 2.5 mm Thick (Pack of 50)
Asin: B009OK52E6 | Model: M12D125A | PartNumber: M12D125A
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Meets Din 125 Specifications.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Meets DIN 125 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
See On Amazon #25
Small Parts 31CNFHN Nylon Hex Nut, 5/16"-18 Thread Size, Nylon, 5/16''-18 (Pack of 100)
Asin: B078SWBLM9 | Model: 31CNFHN | PartNumber: 31CNFHN
Height: 17/64 Inch.
Nylon Hex Nut, 5/16"-18 Thread Size, Nylon, 5/16''-18 (Pack Of 100).
Thread Size: 5/16''-18.
Features
- Material: nylon 6/6 plastic
- Thread size: 5/16''-18
- Height: 17/64 inch
- Nylon Hex Nut, 5/16-18 Thread Size, Nylon, 5/16''-18 (Pack of 100)
- See more on Amazon...
Brand: Small Parts | Manufacturer: Brookview Bolt
Dimensions: 0.27 x 1.00 x 0.52 Inches | Weight: 0.00 pounds
See On Amazon #26
Small Parts Unpolished (Mill) 1008-1010 Steel Round Tube, 1.250" Outer Diameter, 0.120" Wall Thickness, 1.010" Inner Diameter, 4' Length
Asin: B003TPFFIU | Model: ALL22134-4 | PartNumber: ALL22134-4 | Ean: 0848238012576 | UPC: 848238012576
Item Package Width: 4.9999999949".
Item Package Height: 4.9999999949".
Item Package Length: 53.99999994492".
Features
- Model Number: ALL22134-4
- Item Package Length: 53.99999994492
- Item Package Width: 4.9999999949
- Item Package Height: 4.9999999949
- See more on Amazon...
Brand: Small Parts | Manufacturer: Lane Automotive
Dimensions: 1.25 x 48.00 x 1.25 Inches | Weight: 0.00 Pounds
See On Amazon #27
Small Parts 5032C8 1/2"-13 x 2" Carriage Bolt Grade 8 Fully Threaded Zinc Yellow (Pack of 5)
Asin: B08QDF4KBB | Model: 5032C8 | PartNumber: 5032C8
Zinc Yellow.
Grade 8, Fully Threaded.
Features
- Round head bolt with a square neck under the head, and a unified thread pitch.
- Grade 8, Fully Threaded
- Zinc Yellow
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.01 x 2.00 x 0.50 Inches
See On Amazon #28
Small Parts Nylon 6/6 Flat Washer, Plain Finish, Black, 1/4" Hole Size, 0.26" ID, 0.69" OD, 0.06" Nominal Thickness (Pack of 100)
Asin: B009OLNI00 | Model: FSCC11045B | PartNumber: FSCC11045B
Nylon 6/6 Provides Resistance To Abrasion, Corrosion, And Many Chemicals, Is Nonconductive, And Is A Strong Yet Lightweight Plastic.
Features
- Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
- Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals, is nonconductive, and is a strong yet lightweight plastic
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Weight: 0.00 Pounds
See On Amazon #29
020 Buna-N O-Ring, 70A Durometer, Black, 7/8" ID, 1" OD, 1/16" Width (Pack of 100)
Asin: B000FMYOXW | Model: 020 | PartNumber: 020
Round In Cross-Section To Provide A Seal Between Cylindrical Overlapping Surfaces.
Meets Standards Defined By Aerospace Standard As568a.
Durometer (Hardness) Of 70A For Resistance To Penetration.
Can Be Used Across A Wide Temperature Range From -30 Degrees F (-34 Degrees C) To 250 Degrees F (121 Degrees C).
Features
- Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons
- Can be used across a wide temperature range from -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
- See more on Amazon...
Brand: Mr O-Ring | Manufacturer: Small Parts
See On Amazon #30
Small Parts 501614RSA Aluminum Unthreaded Spacer, 1/2" OD, 1" Length, for 1/4" Screw Size (Pack of 5)
Asin: B07K38CV2C | Model: 501614RSA | PartNumber: 501614RSA
Od: 1/2".
Id: 0.252".
Shape: Round.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.00 x 0.00 Inches
See On Amazon