Southwest Speed - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling from Southwest Speed on Amazon
- NEW RANGE TECHNOLOGY AFM-DFM DISABLER,RED,COMPATIBLE WITH V6 & V8 GM MOTORS
- NEW EDGE INSIGHT CTS3 DIGITAL GAUGE,5" TOUCHSCREEN,COMPATIBLE WITH 1996-UP ON BOARD DIAGNOSTICS-II V...
- NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,BLACK,2.5" CENTER IN-CENTER OUT
- HOLLEY QUICK FUEL BRAWLER CARBURETOR,600 CFM,4150,4 BARREL,ELECTRIC CHOKE,VACUUM SECONDARIES
- NEW EDGE EAS EGT STARTER KIT,DIESEL DRIVING,TOWING,COMPATIBLE WITH EDGE CS,CS2,CTS,CTS2 SYSTEMS
- NEW HOLLEY SNIPER CARBURETED FUEL PRESSURE REGULATOR,CHROME,4.5-9 PSI,.375 INCH NPT INLET & OUTLET,C...
- SUPERCHIPS FLASHCAL F5 IN-CAB TUNER,GASOLINE,COMPATIBLE WITH 2007-2018 JEEP JK WRANGLER
- HOLLEY QUICK FUEL BRAWLER CARBURETOR,650 CFM,4150,4 BARREL,ELECTRIC CHOKE,MECHANICAL SECONDARIES
- NEW QUICK FUEL TECHNOLOGY BRAWLER STREET CARBURETOR,RED BILLET BLACK FINISH,MECHANICAL SECONDARIES,7...
- NEW MSD DIGITAL DIGITAL 6AL IGNITION CONTROL BOX WITH REV LIMITER,RED,520-540V,11,000 RPM RANGE,8"L ...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
NEW RANGE TECHNOLOGY AFM-DFM DISABLER,RED,COMPATIBLE WITH V6 & V8 GM MOTORS
Asin: B089NYS6T9 | Model: HOL-RA003R | PartNumber: HOL-RA003R
Features: Range Afm/Dfm Disabler Keeps You In Full Power 100% Of The Time | Simply Plug Into Your Onboard Obd-Ii Port And It Instantly Begins Working To Eliminate The Afm System | The Power & Control You Need In Any Situation | The Range Afm/Dfm Disabler Does Not Reprogram Your Factory Ecu | Leaves No Trace - Unplug It To Return To Factory Settings | Fits V6 & V8 General Motors (Gm) Active Or Dynamic Fuel Management Vehicles, Includes Cars, Trucks & Suvs | This Device Does Not Currently Support.
Specs: Brand: Range Technology | Color: Red | Emission Code: 7 | Product Type: Tuner.
The Range Afm/Dfm Disabler Allows Your V6 Or V8 Gm Vehicle To Run In Full Cylinder Mode At All Times, Preventing The Active Or Dynamic Fuel Management System From Dropping Cylinders. Our Patented Technology Is The Only Product That Will Disable Active Or Dynamic Fuel Management Without Reprogramming The Factory Ecu. Full Power Delivery All The Time Without Factory Warranty Concerns..
Features
- Brand New Range Technology AFM/DFM Disabler, Red, Compatible with V6 & V8 GM Motors, Produced by Holley Performance Products (Part #RA003R)
- The Range AFM/DFM Disabler allows your V6 or V8 GM vehicle to run in full cylinder mode at all times, preventing the Active or Dynamic Fuel Management system from dropping cylinders. Our patented technology is the only product that will disable Active or Dynamic Fuel Management without reprogramming the factory ECU. Full power delivery all the time without factory warranty concerns.
- Features: Range AFM/DFM Disabler keeps you in full power 100% of the time | Simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM system | The power & control you need in any situation | The Range AFM/DFM Disabler does not reprogram your factory ECU | Leaves no trace - Unplug it to return to factory settings | Fits V6 & V8 General Motors (GM) active or dynamic fuel management vehicles, includes cars, trucks & SUVs | This device does not currently support
- Specs: Brand: Range Technology | Color: Red | Emission Code: 7 | Product Type: Tuner
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: HOLLEY PERFORMANCE PRODUCTS
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #2
NEW EDGE INSIGHT CTS3 DIGITAL GAUGE,5" TOUCHSCREEN,COMPATIBLE WITH 1996-UP ON BOARD DIAGNOSTICS-II VEHICLES
Asin: B089NZQHWQ
The Insight Is The #1 Preferred Digital Gauge Monitor In The Market Today, Used By Daily Drivers And Enthusiasts Everywhere. The Insight Is The Most Comprehensive, State-Of-The-Art, Multi-Gauge Touch-Screen Display On The Market. It Is An Instantaneous And Inexpensive Alternative To Bulky, Analog Gauges That Would Otherwise Cost Hundreds Of Dollars And Take Hours To Install..
Note: Compatibility With 1998-2005 Dodge/Ram Has Not Been Released Yet..
This Is The Perfect Tool For Those Who Want To Monitor Their Vehicle Performance And Prefer Not To Program Their Vehicle, Or For Those Who Already Have Significant Performance Upgrades And Want To Safely Monitor Their Vehicle Performance. Not Only Can The Insight Monitor Vehicle Performance, But It Can Also Be Intelligently Configured To Provide Audible And Visual Alerts To Help You Protect Your Vehicle..
Upgrade From Bulky Gauges With This Multi-Gauge, Touch-Screen Data Logger To Track Important Vehicle Parameters Including Egt, Regen Cycles, Trans Temp, Boost, Rpm, Etc. This Insight Cts3 Digital Gauge Monitor By Edge Is Compatible With Most Domestic 1996 And Newer (Obdii) Gas And Diesel Vehicles, And The Full-Color 5-Inch Capacitive Touchscreen Provides Crystal-Clear Readouts With Auto-Dimming For Night-Time Use..
Features
- Brand New Edge Insight CTS3 Digital Gauge, Compatible with 1996 & Up OBD-II Vehicles, Produced by Holley Performance Products (Holley Part #84130-3)
- Upgrade from bulky gauges with this multi-gauge, touch-screen data logger to track important vehicle parameters including EGT, regen cycles, trans temp, boost, RPM, etc. This Insight CTS3 Digital Gauge Monitor by Edge is compatible with most domestic 1996 and newer (OBDII) gas and diesel vehicles, and the full-color 5-inch capacitive touchscreen provides crystal-clear readouts with auto-dimming for night-time use.
- The Insight is the #1 preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. The Insight is the most comprehensive, state-of-the-art, multi-gauge touch-screen display on the market. It is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install.
- This is the perfect tool for those who want to monitor their vehicle performance and prefer not to program their vehicle, or for those who already have significant performance upgrades and want to safely monitor their vehicle performance. Not only can the Insight monitor vehicle performance, but it can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle.
- NOTE: Compatibility with 1998-2005 Dodge/Ram has not been released yet.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: EDGE
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #3
NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,BLACK,2.5" CENTER IN-CENTER OUT
Asin: B08T25Q7F2
Features: Deep Aggressive Sound Exhaust Note | Noticeable Interior Resonance | Recent Two Chamber Improvement | Race Proven Delta Flow Technology.
Note: Universal Muffler - Not A Direct Fit. Some Adaptation Required..
Flowmaster Super 44 Muffler Uses The Same Delta Flow Technology Found In Our Larger Super 40 Mufflers. The Super 44 Delivers A Powerful Rich Tone And Is The Most Aggressive, Deepest Sounding, Highest Performing Four-Inch Case Street Muffler We Have Ever Built! Constructed Of 16 Gauge Aluminized Steel And Fully Mig Welded For Maximum Durability..
Features
- Brand New Flowmaster Super 44 Series Chambered Muffler, Black Paint Finish, 2.5" Center In & Center Out (Holley Part #942545)
- Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
- Features: Deep Aggressive Sound Exhaust Note | Noticeable interior resonance | Recent two chamber improvement | Race proven Delta Flow technology
- NOTE: Universal Muffler - Not a direct fit. Some adaptation required.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Flowmaster
Dimensions: 4.50 x 20.80 x 9.90 Inches | Weight: 8.55 Pounds
See On Amazon #4
HOLLEY QUICK FUEL BRAWLER CARBURETOR,600 CFM,4150,4 BARREL,ELECTRIC CHOKE,VACUUM SECONDARIES
Asin: B07XBTVPH3
Brawler Die-Cast Carburetors Are Now Available In A Side Hung Bowl Design. With A Simpler One-Fuel Line Connection, These New Carburetors Are A Perfect Fit For Bolt On Street Performance. The Carburetors Are Equipped With Universal Throttle Levers To Accommodate Ford A/T Kickdown, Gm 700 R4 Mounting Holes, And Ability To Mount Brackets For Chrysler Vehicles..
The Brawler Family Of Diecast Carburetors Are All Made From Light-Weight Diecast Aluminum Components And Are Available In Both Vacuum And Mechanical Secondary Models. They Offer All The Tunability And Options That You Would Find From More Expensive Carburetors In The Market, Including A Beautiful Appearance, Electric Choke, And Four-Corner Idle Adjustment On All Mechanical Secondary Models..
Brawler Diecast Carburetors Are Machined And Assembled By Craftsman Right Here In The Usa. These Carburetors Work Hard Just As Their Name Implies - Just Raw Bare Knuckled Performance That You Can Rely On. Do Not Let The Budget-Friendly Price Fool You, The Brawler Development Focused On The Performance You Want And Not The Pretty Box That It Comes In. Brawlers Come With The Latest Technology In Air/Fuel Calibrations For Current Day Street Engine Demands..
Features: Performance Upgrade For Stock To Mildly Modified V-8 Engines | Calibrated For Excellent Street Performance Right Out Of The Box | Factory Preset Electric Choke For Easy Startups | Vacuum Secondaries For Use On Wide Variety Of Vehicles | Single Feed Fuel Inlet For Easy Installation | Integrated 700R4/200R4 Transmission Kick Down Cable Mounting | Changeable Air Bleeds | Adjustable Needle And Seats.
Features
- Brand New Quick Fuel 600 CFM Brawler Diecast Carburetor with Vacuum Secondaries, Electric Choke, 4150 Model (Part #BR-67270)
- Features: Performance upgrade for stock to mildly modified V-8 engines | Calibrated for excellent street performance right out of the box | Factory preset electric choke for easy startups | Vacuum secondaries for use on wide variety of vehicles | Single feed fuel inlet for easy installation | Integrated 700R4/200R4 transmission kick down cable mounting | Changeable Air Bleeds | Adjustable Needle and Seats
- Brawler die-cast carburetors are now available in a side hung bowl design. With a simpler one-fuel line connection, these new carburetors are a perfect fit for bolt on street performance. The carburetors are equipped with universal throttle levers to accommodate Ford A/T kickdown, GM 700 R4 mounting holes, and ability to mount brackets for Chrysler vehicles.
- Brawler diecast carburetors are machined and assembled by craftsman right here in the USA. These carburetors work hard just as their name implies - just raw bare knuckled performance that you can rely on. Do not let the budget-friendly price fool you, the Brawler development focused on the performance you want and not the pretty box that it comes in. Brawlers come with the latest technology in air/fuel calibrations for current day street engine demands.
- The Brawler family of diecast carburetors are all made from light-weight diecast aluminum components and are available in both vacuum and mechanical secondary models. They offer all the tunability and options that you would find from more expensive carburetors in the market, including a beautiful appearance, electric choke, and four-corner idle adjustment on all mechanical secondary models.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: HOLLY PERFORMANCE PRODUCTS
Dimensions: 10.80 x 17.90 x 12.40 Inches | Weight: 7.85 Pounds
See On Amazon #5
NEW EDGE EAS EGT STARTER KIT,DIESEL DRIVING,TOWING,COMPATIBLE WITH EDGE CS,CS2,CTS,CTS2 SYSTEMS
Asin: B089QW21W4 | Model: EDG-98620 | PartNumber: EDG-98620
Features: Compatible With Cs/Cs2 & Cts/Cts2 Systems | Connect Multiple Egt Sensors To Monitor Temperatures In Different Locations | Ideal For Daily Diesel Driving Or Towing.
Features
- Brand New Edge EAS EGT Kit, Compatible with Edge CS/CS2 & CTS/CTS2 Systems (Holley Part #98620)
- Features: Compatible With CS/CS2 & CTS/CTS2 Systems | Connect Multiple EGT Sensors to Monitor Temperatures in Different Locations | Ideal for Daily Diesel Driving or Towing
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Edge Products Inc.
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #6
NEW HOLLEY SNIPER CARBURETED FUEL PRESSURE REGULATOR,CHROME,4.5-9 PSI,.375 INCH NPT INLET & OUTLET,COMPATIBLE WITH GASOLINE
Asin: B09FR6QM4W
Features: 3/8" Npt Ports | .220" (7/32") Restriction | Includes Mounting Bracket | High Pressure (4-1/2 To 9 Psi) | Chrome Finish | Not Alcohol Compatible.
Specs: Brand: Sniper | Color: Chrome | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet & Outlet Size: 3/8 Inch Npt | Pressure Range: 4.5-9 Psi | Product Type: Fuel Pressure Regulator | Style: Non-Return.
Sniper Fuel Pressure Regulators Are Designed To Adjust For Fuel Pressure Requirements Of Various Carburetors..
Features
- Brand New Holley Sniper Carbureted Fuel Pressure Regulator, Chrome Finish, 4.5-9 PSI, 3/8 inch NPT Inlet & Outlet, Compatible with Gasoline (Holley Part #80000103)
- Sniper fuel pressure regulators are designed to adjust for fuel pressure requirements of various carburetors.
- Features: 3/8 NPT ports | .220 (7/32) restriction | Includes mounting bracket | High pressure (4-1/2 to 9 PSI) | Chrome finish | Not alcohol compatible
- Specs: Brand: Sniper | Color: Chrome | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet & Outlet Size: 3/8 inch NPT | Pressure Range: 4.5-9 PSI | Product Type: Fuel Pressure Regulator | Style: Non-Return
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: HOLLEY PERFORMANCE PRODUCTS
Dimensions: 3.00 x 4.10 x 3.20 Inches | Weight: 0.55 pounds
See On Amazon #7
SUPERCHIPS FLASHCAL F5 IN-CAB TUNER,GASOLINE,COMPATIBLE WITH 2007-2018 JEEP JK WRANGLER
Asin: B08B11XQM5
Accessory Delay Options (2011-17 Models Only - Includes Adjustable Delay For Radios, Accessory Lights, And Other Aftermarket Accessories Tied To The Same Fuse) Headlamp Delay Options (2011-17 Models Only) Horn Chirp And Exterior Lighting Flash Options When Locking Doors With Keyless Entry Reads And Clears Diagnostic Trouble Codes Internet Updatable.
* Results And Feature Set May Vary Based On Vehicle Make, Model, And Aftermarket Upgrades. Read All Instructions Before Installation And/Or Operation Of This Product Use..
Corrects Speedometer For Tire Upgrades Between 26” - 42” Speedometer Recalibration For Gear /Axle Swaps Up To 5.38 Locking Axle Options With Transfer Case In 4-Hi & 4-Low (Rubicon Only) Engine Idle Adjustability For Winching Daytime Running Light Options One Touch Lane Change Tpms On/Off.
* This Product Has Not Been Tested Or Validated On Right Hand Drive Applications Or Imported (Non-American Vin Based) Applications. They Are Not Supported By This Product..
Features
- COMPATIBLE WITH 2007-2018 JEEP JK WRANGLER
- * This product has not been tested or validated on right hand drive applications or imported (non-American VIN based) applications. They are not supported by this product.
- Accessory delay options (2011-17 models only - Includes adjustable delay for radios, accessory lights, and other aftermarket accessories tied to the same fuse) Headlamp delay options (2011-17 models only) Horn chirp and exterior lighting flash options when locking doors with keyless entry Reads and clears diagnostic trouble codes Internet updatable
- Corrects speedometer for tire upgrades between 26 - 42 Speedometer recalibration for gear /axle swaps up to 5.38 Locking axle options with transfer case in 4-Hi & 4-Low (Rubicon only) Engine idle adjustability for winching Daytime running light options One touch lane change TPMS On/Off
- * Results and feature set may vary based on vehicle make, model, and aftermarket upgrades. Read all instructions before installation and/or operation of this product use.
- See more on Amazon...
Brand: Superchips | Manufacturer: Southwest Speed
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.66 pounds
See On Amazon #8
HOLLEY QUICK FUEL BRAWLER CARBURETOR,650 CFM,4150,4 BARREL,ELECTRIC CHOKE,MECHANICAL SECONDARIES
Asin: B07X5N2FV8 | Model: QFT-BR-67255 | PartNumber: QFT-BR-67255
Brawler Diecast Carburetors Are Machined And Assembled By Craftsman Right Here In The Usa. These Carburetors Work Hard Just As Their Name Implies - Just Raw Bare Knuckled Performance That You Can Rely On. Do Not Let The Budget-Friendly Price Fool You, The Brawler Development Focused On The Performance You Want And Not The Pretty Box That It Comes In. Brawlers Come With The Latest Technology In Air/Fuel Calibrations For Current Day Street Engine Demands..
Note: This Model Of Carburetor Has The Square Bore Flange Bolt Pattern. It Can Replace Holley, Edelbrock, Carter Afb, And Autolite Style Carburetors With 5 3/16" X 5 5/8" Bolt Pattern. If You Have A Spreadbore Style Intake Manifold, You Will Need An Adapter To Install This Carburetor. Similar To The Mr. Gasket #1932..
The Brawler Family Of Diecast Carburetors Are All Made From Light-Weight Diecast Aluminum Components And Are Available In Both Vacuum And Mechanical Secondary Models. They Offer All The Tunability And Options That You Would Find From More Expensive Carburetors In The Market, Including A Beautiful Appearance, Electric Choke, And Four-Corner Idle Adjustment On All Mechanical Secondary Models..
Features: Dual Inlet Fuel Bowls With Sight Glass Windows For Safe And Easy Float Adjustments | Electric Choke For Easy Starting In Colder Climates.
Features
- Brand New Quick Fuel 650 CFM Brawler Diecast Carburetor with Mechanical Secondaries, Electric Choke, 4150 Model (Part #BR-67255)
- Features: Dual inlet fuel bowls with sight glass windows for safe and easy float adjustments | Electric choke for easy starting in colder climates
- Brawler diecast carburetors are machined and assembled by craftsman right here in the USA. These carburetors work hard just as their name implies - just raw bare knuckled performance that you can rely on. Do not let the budget-friendly price fool you, the Brawler development focused on the performance you want and not the pretty box that it comes in. Brawlers come with the latest technology in air/fuel calibrations for current day street engine demands.
- The Brawler family of diecast carburetors are all made from light-weight diecast aluminum components and are available in both vacuum and mechanical secondary models. They offer all the tunability and options that you would find from more expensive carburetors in the market, including a beautiful appearance, electric choke, and four-corner idle adjustment on all mechanical secondary models.
- NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16 x 5 5/8 bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 8.00 Pounds
See On Amazon #9
NEW QUICK FUEL TECHNOLOGY BRAWLER STREET CARBURETOR,RED BILLET BLACK FINISH,MECHANICAL SECONDARIES,750 CFM,4150 MODEL,COMPATIBLE WITH GASOLINE
Asin: B08LHHLS24
Brawler Street Carburetors Come With Red Billet Metering Blocks With The Latest Technology In Air/Fuel Calibrations For Modern Street Or Race Engine Demands. They Also Come With Red Billet Throttle Bodies For Superior Durability And Throttle Shaft Stability..
Note: This Model Of Carburetor Has The Square Bore Flange Bolt Pattern. It Can Replace Holley, Edelbrock, Carter Afb & Autolite Style Carburetors With 5 3/16" X 5 5/8" Bolt Pattern. If You Have A Spreadbore Style Intake Manifold, You Will Need An Adapter To Install This Carburetor. Similar To The Mr. Gasket #1932..
Brawler Street Models Offer All Of The Options And Tunability That You Would Find From More Expensive Carburetors In The Market, Including An Electric Choke, A Beautiful Finish, And 4-Corner Idle Adjustment On All Mechanical Secondary Models..
Brawler Continues To Lead The Pack With Their Newest Family Of Carburetors In A Black With Red Billet Color Combination. While The Look Is New, The Out Of The Box Performance Is The Same That You Have Come To Expect From Brawler..
Features
- Brand New Quick Fuel Technology Brawler Street Carburetor, Mechanical Secondaries, 750 CFM, 4150, Red Billet Color (Holley Part #BR-67320)
- Brawler continues to lead the pack with their newest family of carburetors in a black with red billet color combination. While the look is new, the out of the box performance is the same that you have come to expect from Brawler.
- Brawler Street carburetors come with red billet metering blocks with the latest technology in air/fuel calibrations for modern street or race engine demands. They also come with red billet throttle bodies for superior durability and throttle shaft stability.
- Brawler Street models offer all of the options and tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish, and 4-corner idle adjustment on all mechanical secondary models.
- NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16 x 5 5/8 bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 11.65 x 12.55 x 8.00 Inches | Weight: 10.09 Pounds
See On Amazon #10
NEW MSD DIGITAL DIGITAL 6AL IGNITION CONTROL BOX WITH REV LIMITER,RED,520-540V,11,000 RPM RANGE,8"L X 4"W X 1.825"H,COMPATIBLE WITH 4-6-8 CYLINDER
Asin: B089P371F1
The Wiring Of The Digital 6Al Is Routed Out One End Of The Unit Through A Sealed And Locking Connector. This Eases Installation And Keeps Your Wiring Looking Neat And Clean. The Rev Limiter Of The 6Al Is Located Right On Top Of The Housing For Easy Access To The 2 Rotary Dials To Set The Limit In 100 Rpm Increments..
The Digital 6Al Is Supplied With The Wiring Harness And The Components Needed For Installation. The 6Al Is Also Supplied With Vibration Mounts. Both Ignitions Are Compatible On 4, 6 Or 8-Cylinder Engines With 12-Volt, Negative Ground Electrical Systems. They Will Accept Trigger Inputs From Breaker Points, Amplifiers & Magnetic Pickups..
Inside The Digital 6Al You Will Find A Microprocessor That Monitors And Controls Every Firing & Rev Limit. The Circuits Are Updated With Efficient Components That Help The Ignition Produce More Power While Drawing Less Current! In Fact, The Digital 6Al Delivers Over 530 Volts To The Coil With Up To 135Mj Of Spark Energy For Every Firing! Increased Output Combined With Msd Proven Multiple Spark Series Is A Win-Win Situation!.
The Msd 6Al Ignition Control Set The Standards That Other Ignitions Strive To Reach. In Fact, You Will Find Ignitions From Other Companies That Carry The 6Al Name (And In Some Cases, The Same Part Number). Msd Raised The Bar Even Higher With The Revised Digital 6Al Ignition Control!.
Features
- Brand New MSD Digital 6AL Ignition Control Box with Built-In Rev Limiter, 520-540 Volts, Compatible with 4,6 & 8 Cylinder Engines, Produced by Holley Performance Products (Part #6425)
- The MSD 6AL Ignition Control set the standards that other ignitions strive to reach. In fact, you will find ignitions from other companies that carry the 6AL name (and in some cases, the same part number). MSD raised the bar even higher with the revised Digital 6AL Ignition Control!
- The wiring of the Digital 6AL is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The rev limiter of the 6AL is located right on top of the housing for easy access to the 2 rotary dials to set the limit in 100 RPM increments.
- Inside the Digital 6AL you will find a microprocessor that monitors and controls every firing & rev limit. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSD proven multiple spark series is a win-win situation!
- The Digital 6AL is supplied with the wiring harness and the components needed for installation. The 6AL is also supplied with vibration mounts. Both ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They will accept trigger inputs from breaker points, amplifiers & magnetic pickups.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: MSD
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #11
NEW BILSTEIN FRONT & REAR SHOCKS FOR 07-18 JEEP WRANGLER JK WITH A 1.5" TO 3" LIFT, GAS SHOCK ABSORBERS, ISLANDER MOUNTAIN RUBICON SAHARA SPORT UNLIMITED X X-S 2007 2008 2009 2010 2011 2012 2013 2014
Asin: B01BN3456W
Bilstein 5100 Series Shock Absorbers Are High Gas Pressure Monotube Shocks Designed Specifically For Lifted Pickups, Suvs And S | * The Shocks Feature A 46Mm Digressive Piston With Self-Adjusting Deflective Disc Valving | * They Offer Super Damping Ability That Makes Them Ideal For Heavy Hauling Or Occasional Off-Road Use, While Maintaining An Exceptional Street Ride.
Compatible With | * : | * 2007-2014 Wrangler Jk With 1.5" To 3" Lift On The Front And | * Rear, Including: | * X | * X-6 | * Rubicon | * Sahara | * Unlimited X | * Unlimited Islander | * Unlimited Mountain | * Unlimited Rubicon | * Unlimited Sahara | * Unlimited Sport | *** Bilstein's Old Part Numbers On These Shocks Were F4-Be5-E670-H0 On The Fronts And F4-Be5-E671-H0 On The Rears ***.
Specs: | * Front: | * Collapsed Length: 14.98" (380.60Mm) | * Extended Length: 24.63" (625.50Mm) | * Rear: | * Collapsed Length: 15.39" (390.80Mm) | * Extended Length: 25.00" (635.00Mm).
Includes: | * 2 - Bilstein # 24-146708 Front Shocks, 46Mm | * 2 - Bilstein # 24-146715 Rear Shocks, 46Mm.
Features
- Brand New Set of Bilstein 5100 Series Monotube Shock Absorbers, 2 Fronts and 2 Rear
- Includes: | * 2 - Bilstein # 24-146708 Front Shocks, 46mm | * 2 - Bilstein # 24-146715 Rear Shocks, 46mm
- Bilstein 5100 Series Shock Absorbers are high gas pressure monotube shocks designed specifically for lifted pickups, SUVs and s | * The shocks feature a 46mm digressive piston with self-adjusting deflective disc valving | * They offer super damping ability that makes them ideal for heavy hauling or occasional off-road use, while maintaining an exceptional street ride
- Specs: | * Front: | * Collapsed Length: 14.98 (380.60mm) | * Extended Length: 24.63 (625.50mm) | * Rear: | * Collapsed Length: 15.39 (390.80mm) | * Extended Length: 25.00 (635.00mm)
- compatible with | * : | * 2007-2014 Wrangler JK with 1.5 to 3 Lift on the Front and | * Rear, including: | * X | * X-6 | * Rubicon | * Sahara | * Unlimited X | * Unlimited Islander | * Unlimited Mountain | * Unlimited Rubicon | * Unlimited Sahara | * Unlimited Sport | *** Bilstein's old part numbers on these shocks were F4-BE5-E670-H0 on the Fronts and F4-BE5-E671-H0 on the Rears ***
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 30.00 x 10.00 x 10.00 Inches
See On Amazon #12
NEW BILSTEIN FRONT & REAR SHOCKS FOR 05-13 FORD F-250, F-350, F-450 SUPER DUTY, INCLUDING FX4 XL XLT KING RANCH LARIAT HARLEY DAVIDSON, SHOCK ABSORBERS, 2005 2006 2007 2008 2009 2010 2011 2012 2013
Asin: B01AVLCWT4
Bilstein 4600 Series Shock Absorbers And Struts Are Designed Specifically To Help Your Truck, Van Or Suv Reach Its Pinnacle In Ride Performance And Handling, While Still Providing The Comfortable Ride That Has Come To Be Expected From Bilstein.
Compatible With | * : | * 2005-2013 F-250 Super Duty, **4 Wheel Drive Only**, Including Fx4, Xl, Xlt, King Ranch, Lariat, Harley Davidson, Cabela's, And Platinum | * 2005-2013 F-350 Super Duty, **4 Wheel Drive Only**, Including Fx4, Xl, Xlt, King Ranch, Lariat, Harley Davidson, Cabela's, And Platinum | * 2008-2013 F-450 Super Duty, 2 & 4 Wheel Drive, Including Xl, Xlt, King Ranch, Lariat, Harley Davidson, And Platinum.
A 4600 Series Equipped Vehicle Offers Superior Control Compared To Conventional Alternatives, Allowing You To Keep Cargo Secure, From Your Kids To Work Equipment, Mile After Mile..
Includes: | * 2 - Bilstein #24-186674 Front Shocks, 46Mm | * 2 - Bilstein #24-185981 Rear Shocks, 46Mm.
Features
- Brand New Set of Bilstein Monotube Shock Absorbers, 2 Fronts and 2 Rear
- Includes: | * 2 - Bilstein #24-186674 Front Shocks, 46mm | * 2 - Bilstein #24-185981 Rear Shocks, 46mm
- Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from Bilstein
- A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure, from your kids to work equipment, mile after mile.
- compatible with | * : | * 2005-2013 F-250 Super Duty, **4 Wheel Drive Only**, including FX4, XL, XLT, King Ranch, Lariat, Harley Davidson, Cabela's, and Platinum | * 2005-2013 F-350 Super Duty, **4 Wheel Drive Only**, including FX4, XL, XLT, King Ranch, Lariat, Harley Davidson, Cabela's, and Platinum | * 2008-2013 F-450 Super Duty, 2 & 4 Wheel Drive, including XL, XLT, King Ranch, Lariat, Harley Davidson, and Platinum
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 7.00 x 29.00 x 7.00 Inches | Weight: 27.00 pounds
See On Amazon #13
NEW BILSTEIN FRONT & REAR SHOCKS FOR 05-15 TOYOTA TACOMA, 46MM 5100 SERIES GAS PRESSURE SHOCK ABSORBERS, RIDE HEIGHT ADJUSTABLE FRONTS, 2005 2006 2007 2008 2009 2010 2011 2012 2013
Asin: B019P6HVT2 | Model: 5100 Series | PartNumber: 5100 Series
Specs: | * Front: | * Bilstein 5100 Series Ride Height Adjustable Shock Absorbers Are Designed For Front Coilover Style Pickup Suspensions | Multiple Snap-Ring Grooves In The Shock Body Allow For Different Spring Seat Positions, Providing 0"-2.5" Of Front End Lift, Depending On Application Collapsed Length: 17.03" (432.56Mm) Extended Length: 22.56" (573.02Mm).
Compatible With | * : | * 2005-2013 Tacoma | * Bilstein's Old Part Numbers On These Shocks Was F4-Be5-C475-H1 And 24-186711 On The Fronts And F4-Be5-C476-H0 On The Rears.
Rear:| * Bilstein 5100 Series Shock Absorbers Are High Gas Pressure Monotube Shocks Designed Specifically For Lifted Pickups, Suvs And S I They Offer Super Damping Ability That Makes Them Ideal For Heavy Hauling Or Occasional Off-Road Use, While Maintaining An Exceptional Street Ride | * Collapsed Length: 14.02" (356.11Mm) | * Extended Length: 22.94" (582.68Mm).
Includes: | * 2 - Bilstein # 24-239370 Front Shocks, 46Mm | * 2 - Bilstein # 24-186728 Rear Shocks, 46Mm.
Features
- compatible with 05-'15 Tacoma 4WD
- Includes: | * 2 - Bilstein # 24-239370 Front Shocks, 46mm | * 2 - Bilstein # 24-186728 Rear Shocks, 46mm
- Specs: | * Front: | * Bilstein 5100 Series Ride Height Adjustable Shock Absorbers are designed for front coilover style pickup suspensions | Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0-2.5 of front end lift, depending on application Collapsed Length: 17.03 (432.56mm) Extended Length: 22.56 (573.02mm)
- Rear:| * Bilstein 5100 Series Shock Absorbers are high gas pressure monotube shocks designed specifically for lifted pickups, SUVs and s I They offer super damping ability that makes them ideal for heavy hauling or occasional off-road use, while maintaining an exceptional street ride | * Collapsed Length: 14.02 (356.11mm) | * Extended Length: 22.94 (582.68mm)
- compatible with | * : | * 2005-2013 Tacoma | * Bilstein's old part numbers on these shocks was F4-BE5-C475-H1 and 24-186711 on the fronts and F4-BE5-C476-H0 on the rears
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 3.23 x 26.77 x 4.02 Inches
See On Amazon #14
NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH
Asin: B08HSJBWXF
These Mufflers Utilize The Same Patented Delta Flow Technology That Is Found In Other Flowmaster Super Series Mufflers To Deliver Maximum Performance. Constructed Of 16 Gauge 409S Stainless Steel & Fully Mig Welded For Maximum Durability..
Note: Universal Muffler - Some Adaptation May Be Required..
Features: Intended Only For Off-Road Or Race Applications | Delta Flow Technology | 409Ss Stainless Steel Construction | Super 10 Sound Level.
Super 10 Series 409S Stainless Steel, Single Chamber Mufflers. Intended For Customers Who Desire The Loudest & Most Aggressive Sound That They Can Find. Because These Mufflers Are So Aggressive, They Are Recommended Only For Off Highway Use & Not For Street Driven Vehicles..
Features
- Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015)
- Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles.
- These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability.
- Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level
- NOTE: Universal Muffler - Some adaptation may be required.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Flowmaster
Dimensions: 4.50 x 14.10 x 9.90 Inches | Weight: 5.40 Pounds
See On Amazon #15
NEW HOLLEY MAIN JET SET,72 JETS,2 EACH OF SIZES 64-99,COMPATIBLE WITH 2010,2300,4010,4150,4160,4500 CARBURETORS
Asin: B07TCCGYND
Specs: Emission Code: 5 | Product Type: Jet Assortment Kit.
The Holley Jet Assortment Kit Is The Professional Way To Track-Tune Your Holley Carburetor For Top Performance. This Kit Consists Of Two (2) Each Of Thirty-Six (36) Different Jet Sizes, Ranging From #64 To #99. The Jets Are Contained In A Plastic Case That Is Designed To Keep Them Separated And Make Them Easily Accessible. Jet Sizes Selected Will Give The Broadest Range Of Adjustment And Tuning For Most Performance Carburetor Applications..
Features: 2 Each Of Jet Sizes 64-99 | Contained In Plastic Case | Separated And Easy Accessible | Fits Holley Model 2010, 2300, 4010, 4011, 4150, 4160 & 4500 Carburetors.
Features
- Brand New Holley Jet Assortment Kit (Part #36-181)
- Features: 2 Each Of Jet Sizes 64-99 | Contained In Plastic Case | Separated and Easy Accessible | Fits Holley Model 2010, 2300, 4010, 4011, 4150, 4160 & 4500 Carburetors
- Specs: Emission Code: 5 | Product Type: Jet Assortment Kit
- The Holley jet assortment kit is the professional way to track-tune your Holley carburetor for top performance. This kit consists of two (2) each of thirty-six (36) different jet sizes, ranging from #64 to #99. The jets are contained in a plastic case that is designed to keep them separated and make them easily accessible. Jet sizes selected will give the broadest range of adjustment and tuning for most performance carburetor applications.
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 1.70 x 6.90 x 6.70 Inches | Weight: 0.85 Pounds
See On Amazon #16
NEW BILSTEIN FRONT & REAR SHOCKS FOR 99-14 FORD F53, GAS PRESSURE SHOCK ABSORBERS, MOTORHOME BASE 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014
Asin: B01BU77NTW | Model: B6 Heavy Duty | PartNumber: B6 Heavy Duty
Bilstein B6 Heavy Duty Monotube Gas Pressure Shocks And Struts Are The Ideal Choice For Most Vehicles | * These Shocks Provide Improved Handling And Stability, Without Sacrificing Ride Comfort.
Compatible With | * | * F53: | * 1999-2014 F53 Base | *** Bilstein's Old Part Numbers On These Shocks Were 24-187039 On The Front, And 24-187046 On The Rears ***.
Utilizing Our Patented Design, The Dampers Allow The Vehicle To Glide Over Every Type Of Road Surface You May Encounter While Maintaining Complete Command At All Times.
Includes: | * 2 - Bilstein # 24-234511 Front Shocks, 46Mm | * 2 - Bilstein # 24-234528 Rear Shocks, 46Mm.
Features
- Brand New Set of Bilstein Monotube Shock Absorbers, 2 Fronts and 2 Rear
- Includes: | * 2 - Bilstein # 24-234511 Front Shocks, 46mm | * 2 - Bilstein # 24-234528 Rear Shocks, 46mm
- Bilstein B6 Heavy Duty monotube gas pressure shocks and struts are the ideal choice for most vehicles | * These shocks provide improved handling and stability, without sacrificing ride comfort
- Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times
- compatible with | * | * F53: | * 1999-2014 F53 Base | *** Bilstein's old part numbers on these shocks were 24-187039 on the Front, and 24-187046 on the Rears ***
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 6.00 x 28.00 x 6.00 Inches | Weight: 27.00 Pounds
See On Amazon #17
NEW RACEQUIP LATCH & LINK 5 POINT HARNESS SET,BLACK,3 INCH LAP & SHOULDER,2 INCH SUB, PULL DOWN STYLE LAP BELT
Asin: B0C31LF38W | Model: RQP-711001RQP | PartNumber: RQP-711001RQP
All Racequip Latch & Link Motorsports Hаrness Sets Are Distinguished By A Pivoting "Hammer," Called A Duckbill, Which Is Located On The Lap Bеlt And Locks All The Bеlts Into Place By Snapping Down Into A Detent. Both Shoulder Bеlts And The Sub-Bеlt Are Hooked Over The Link; The Link Is Inserted Into The Latch On The Lap Bеlt; The Duckbill Is Then Brought Down Into And Over The Link, Securely Holding All The Pieces In Place..
Features: Premium 3" Pоlyester Webbing | Pull Down Style Lap Bеlt | 5 Point Design - Single 2" Crоtch Strap | 3" Hardware Ends Installed | Double Adjustable For Ease Of Installation | Wrap Around Or Bolt-In Mounting | Drop-Forged Steel Hardware | Shoulders Adjust From 20" To 62" | Lap Bеlt Adjusts 22" To 60" | Twin Individual Shoulder Bеlts.
Specs: Brand: Racequip | Color: Black | Latch Style: Latch & Link | Number Of Mounting Points: 5 Point | Product Type: 5-Point Нarness | Size: 3 In. Lap And Shoulder - 2 In. Sub.
Since Racequip Seat Bеlt Sets Are "Double Adjustable", Lengths Are Simply Adjusted On Either End For Ease Of Installation. Using The Included Three Bar Slide You Can Mount The Bеlts By Either Wrapping Them Around A Rollbar Or By Bolting Them In Place With The Supplied Ends (Bolts Not Included). Snap Hook Ends And Eyebolts Are Sold Separately If The User Wishes To Install Bеlts In That Manner..
Racequip Latch & Link 5-Point Auto Racing Hаrness Set Has Twin Individual Shoulder Bеlts And Is Manufactured Using Premium 3" Pоlyester Webbing And Drop Forged Steel Hardware To Exceed The Sfі 16.1 Rating. Shoulders Adjust From 20" To 62" And The Lap Bеlt Adjusts From 20" To 60". All Racequip 711 Series Bеlts Come As A "Pull Down Lap" Design, Which Means That The Lap Bеlts Must Be Pulled Down And Away From The Center Latch & Link Buckle Mechanism To Tighten..
Features
- Brand New Racequip Latch & Link 5 Point arness Set, Black, 3 inch Lap & Shoulder, 2 inch Sub, Pull Down Style Lap B lt (H lley Part #711001RQP).
- RaceQuip Latch & Link 5-point auto racing h rness set has twin individual shoulder b lts and is manufactured using premium 3 p lyester webbing and drop forged steel hardware to exceed the SF 16.1 rating. Shoulders adjust from 20 to 62 and the lap b lt adjusts from 20 to 60. All RaceQuip 711 series b lts come as a pull down lap design, which means that the lap b lts must be pulled down and away from the center latch & link buckle mechanism to tighten.
- All RaceQuip Latch & Link motorsports h rness sets are distinguished by a pivoting hammer, called a Duckbill, which is located on the lap b lt and locks all the b lts into place by snapping down into a detent. Both shoulder b lts and the sub-b lt are hooked over the link; the link is inserted into the latch on the lap b lt; the Duckbill is then brought down into and over the link, securely holding all the pieces in place.
- Since RaceQuip seat b lt sets are double adjustable, lengths are simply adjusted on either end for ease of installation. Using the included three bar slide you can mount the b lts by either wrapping them around a rollbar or by bolting them in place with the supplied ends (bolts not included). Snap hook ends and eyebolts are sold separately if the user wishes to install b lts in that manner.
- Features: Premium 3 P lyester Webbing | Pull Down Style Lap B lt | 5 Point Design - Single 2 Cr tch Strap | 3 Hardware Ends Installed | Double Adjustable for Ease of Installation | Wrap Around or Bolt-in Mounting | Drop-Forged Steel Hardware | Shoulders Adjust from 20 to 62 | Lap B lt Adjusts 22 to 60 | Twin Individual Shoulder B lts
- Specs: Brand: RaceQuip | Color: Black | Latch Style: Latch & Link | Number of Mounting Points: 5 Point | Product Type: 5-Point arness | Size: 3 in. Lap and Shoulder - 2 in. Sub
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: RaceQuip
Dimensions: 0.00 x 0.00 x 0.00 Inches
Warranty: Parts
See On Amazon #18
NEW BILSTEIN SHOCK ABSORBER SET,FRONT & REAR,0" TO 2" LIFT,COMPATIBLE WITH 1997-2006 JEEP WRANGLER TJ
Asin: B081VNQ75R
Bilstein 5100 Series Shock Absorbers Are High Gas Pressure Monotube Shocks Designed Specifically For Lifted Pickups, Suvs And S | * The Shocks Feature A 46Mm Digressive Piston With Self-Adjusting Deflective Disc Valving.
Compatible With | * : | * 1997-2006 Wrangler Tj With 0" To 2" Lift, Including: | * Se | * Sahara | * Sport | * X | * Rubicon | * Unlimited | * Unlimited Rubicon | * 65Th Anniversary Edition | *** Bilstein's Old Part Numbers On These Shocks Were F4-Be5-D784-H0 On The Fronts And F4-Be5-D785-H0 On The Rears ***.
Specs: | * Front: | * Collapsed Length: 13.06" (331.80Mm) | * Extended Length: 21.18" (538.00Mm) | * Rear: | * Collapsed Length: 12.81" (325.30Mm) | * Extended Length: 20.08" (510.00Mm).
******24-186810 Superseded To 24-293099**** ******24-186827 Superded To 24-293105 ******.
Features
- Brand New Set of Bilstein 5100 Series Monotube Shock Absorbers, 2 Fronts and 2 Rear
- ******24-186810 superseded to 24-293099**** ******24-186827 superded to 24-293105 ******
- Bilstein 5100 Series Shock Absorbers are high gas pressure monotube shocks designed specifically for lifted pickups, SUVs and s | * The shocks feature a 46mm digressive piston with self-adjusting deflective disc valving
- Specs: | * Front: | * Collapsed Length: 13.06 (331.80mm) | * Extended Length: 21.18 (538.00mm) | * Rear: | * Collapsed Length: 12.81 (325.30mm) | * Extended Length: 20.08 (510.00mm)
- compatible with | * : | * 1997-2006 Wrangler TJ with 0 to 2 Lift, including: | * SE | * Sahara | * Sport | * X | * Rubicon | * Unlimited | * Unlimited Rubicon | * 65th Anniversary Edition | *** Bilstein's old part numbers on these shocks were F4-BE5-D784-H0 on the Fronts and F4-BE5-D785-H0 on the Rears ***
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 10.00 x 28.00 x 10.00 Inches | Weight: 24.00 Pounds
See On Amazon #19
NEW BILSTEIN FRONT & REAR SHOCKS FOR 00-06 CHEVY SUBURBAN 1500 & TAHOE AND GMC YUKON & YUKON XL 1500, 46MM GAS PRESSURE SHOCK ABSORBERS 2000 2001 2002 2003 2004 2005 2006
Asin: B01ATOIME2 | Model: 4600 | PartNumber: 4600
Bilstein 4600 Series Shock Absorbers And Struts Are Designed Specifically To Help Your Truck, Van Or Suv Reach Its Pinnacle In Ride Performance And Handling..
Compatible With | * : | * 2000-2006 Suburban 1500 | * 2000-2006 Tahoe | * : | * 2000-2006 Yukon | * 2000-2006 Yukon Xl 1500 | * Bilstein's Old Part Number On These Shocks Was F4-Be5-6500-H0 On The Fronts And F4-Be5-E380-H0 On The Rears.
A 4600 Series Equipped Vehicle Offers Superior Control Compared To Conventional Alternatives, Allowing You To Keep Cargo Secure, From Your Kids To Work Equipment, Mile After Mile..
Includes: | * 2 - Bilstein # 24-065009 Front Shocks, 46Mm | * 2 - Bilstein # 24-143806 Rear Shocks, 46Mm.
Features
- Brand New Set of Bilstein Monotube Shock Absorbers, 2 Fronts and 2 Rears. NEW BILSTEIN FRONT & REAR SHOCKS Compatible with 00-06 SUBURBAN 1500 & TAHOE AND YUKON & YUKON XL 1500, 46MM GAS PRESSURE SHOCK ABSORBERS
- Includes: | * 2 - Bilstein # 24-065009 Front Shocks, 46mm | * 2 - Bilstein # 24-143806 Rear Shocks, 46mm
- Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling.
- A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure, from your kids to work equipment, mile after mile.
- compatible with | * : | * 2000-2006 Suburban 1500 | * 2000-2006 Tahoe | * : | * 2000-2006 Yukon | * 2000-2006 Yukon XL 1500 | * Bilstein's old part number on these shocks was F4-BE5-6500-H0 on the fronts and F4-BE5-E380-H0 on the rears
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 10.00 x 30.00 x 10.00 Inches | Weight: 27.00 pounds
See On Amazon #20
NEW HOLLEY CLASSIC CARBURETOR,SHINY,750 CFM,4160,4 BARREL,ELECTRIC CHOKE,GASOLINE ONLY,VACUUM SECONDARIES
Asin: B07WPWG2BB
Compatible With Gm, Chrysler, And Ford A/T Kickdown Linkage. Additional Parts May Be Required | Power Valve Blow-Out Protection | 100% Wet-Flow Tested By Holley Technicians To Assure It Arrives Ready To Run.
One Of The Most Widely Used Holley Carbs Of All Times, The 0-80508S! Its Dual Feed Fuel Inlets Assure You Get All The Fuel You Need And Its 750 Cfm Of Airflow Makes It The Perfect Performance Upgrade Carb. Its Vacuum Secondaries And Electric Choke Make It Super Easy To Use On A Wide Range Of Vehicles. Don't Trust Your Performance To Just Anyone, Holley Is The Only Modular Carburetor Company That Has Been In Business For Over 100 Years And Has Powered Every Nascar Champion Since The 60'S..
Specs: Barrels: 4 | Billet Color: None | Booster: Straight | Brand: Holley | Cfm: 750 | Choke: Electric | Circuit: 2 | Emission Code: 2 | Finish: Shiny | Fuel: Gasoline | Fuel Inlet: Dual | Material: Aluminum | Model: 4160 | Primary Main Jet: 72 | Primary Power Valve: 6.5 | Primary Pump Nozzle Size: 31 | Product Type: 4160 Model Carburetor | Secondaries: Vacuum | Supercharged Application: No | Throttle Bore: 1.688".
Features: Vibratory Polished For Good Looks | Performance Upgrade For Stock To Mildly Modified Vehicles | Universal Calibration For Easy Bolt-On Performance | Factory Preset Electric Choke For Easy Startups | Vacuum Secondaries For Use On Wide Variety Of Vehicles. Compensate For All Vehicle Weights, Gearing & Transmissions To Allow Smooth Opening Of Secondaries | Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery.
Features
- Brand New Holley 750 CFM Classic Carburetor with Electric Choke, Vacuum Secondaries, Shiny Finish, Model # 4160 (Part #0-80508S)
- Features: Vibratory polished for good looks | Performance upgrade for stock to mildly modified vehicles | Universal calibration for easy bolt-on performance | Factory preset electric choke for easy startups | Vacuum secondaries for use on wide variety of vehicles. Compensate for all vehicle weights, gearing & transmissions to allow smooth opening of secondaries | Dual feed fuel inlets for constant high volume fuel delivery
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required | Power valve blow-out protection | 100% wet-flow tested by Holley technicians to assure it arrives ready to run
- Specs: Barrels: 4 | Billet Color: None | Booster: Straight | Brand: Holley | CFM: 750 | Choke: Electric | Circuit: 2 | Emission Code: 2 | Finish: Shiny | Fuel: Gasoline | Fuel Inlet: Dual | Material: Aluminum | Model: 4160 | Primary Main Jet: 72 | Primary Power Valve: 6.5 | Primary Pump Nozzle Size: 31 | Product Type: 4160 Model Carburetor | Secondaries: Vacuum | Supercharged Application: No | Throttle Bore: 1.688
- One of the most widely used Holley carbs of all times, the 0-80508S! Its dual feed fuel inlets assure you get all the fuel you need and its 750 CFM of airflow makes it the perfect performance upgrade carb. Its vacuum secondaries and electric choke make it super easy to use on a wide range of vehicles. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 7.55 Pounds
See On Amazon #21
NEW HOLLEY QUICK FUEL BRAWLER DIECAST CARBURETOR,650 CFM,4BBL,4150,ELECTRIC CHOKE,MECHANICAL SECONDARIES
Asin: B088P9XTBM
Specs: Barrels: 4 | Booster: Down Leg | Brand: Brawler | Cfm: 650 | Choke: Electric | Circuit: 2 | Condition: New | Emission Code: 3 | Finish: Shiny | Fuel: Gasoline | Fuel Inlet: Single | Fuel System: Carbureted | High Speed Air Bleed: 28:28 | Idle Air Bleed Size: 70:70 | Marine Use: No Material: Aluminum | Model: Brawler Diecast.
Note: This Model Of Carburetor Has The Square Bore Flange Bolt Pattern. It Can Replace Holley, Edelbrock, Carter Afb & Autolite Style Carburetors With 5 3/16" X 5 5/8" Bolt Pattern. If You Have A Spreadbore Style Intake Manifold, You Will Need An Adapter To Install This Carburetor. Similar To The Mr. Gasket #1932..
Primary Main Jet: 70 | Primary Power Valve: 6.5 | Primary Pump Nozzle Size: 31 | Primary Venturii Size: 1.300" | Product Type: Carburetor | Secondaries: Mechanical | Secondary Main Jet: 74 | Secondary Venturii Size: 1.300" | Supercharged Application: No | Throttle Bore: 1-11/16".
Brawler Die-Cast Carburetors Are Now Available In A Side Hung Bowl Design. With A Simpler One-Fuel Line Connection, These New Carburetors Are A Perfect Fit For Bolt On Street Performance. The Carburetors Are Equipped With Universal Throttle Levers To Accommodate Ford A/T Kickdown, Gm 700 R4 Mounting Holes, And Ability To Mount Brackets For Chrysler Vehicles..
Features
- Brand New Holley Quick Fuel 650 CFM Brawler Diecast Carburetor, Shiny Finish, Mechanical Secondaries, Electric Choke, Compatible with Gasoline (Part #BR-67276)
- Brawler die-cast carburetors are now available in a side hung bowl design. With a simpler one-fuel line connection, these new carburetors are a perfect fit for bolt on street performance. The carburetors are equipped with universal throttle levers to accommodate Ford A/T kickdown, GM 700 R4 mounting holes, and ability to mount brackets for Chrysler vehicles.
- Specs: Barrels: 4 | Booster: Down Leg | Brand: Brawler | CFM: 650 | Choke: Electric | Circuit: 2 | Condition: New | Emission Code: 3 | Finish: Shiny | Fuel: Gasoline | Fuel Inlet: Single | Fuel System: Carbureted | High Speed Air Bleed: 28:28 | Idle Air Bleed Size: 70:70 | Marine Use: No Material: Aluminum | Model: Brawler Diecast
- Primary Main Jet: 70 | Primary Power Valve: 6.5 | Primary Pump Nozzle Size: 31 | Primary Venturii Size: 1.300 | Product Type: Carburetor | Secondaries: Mechanical | Secondary Main Jet: 74 | Secondary Venturii Size: 1.300 | Supercharged Application: No | Throttle Bore: 1-11/16
- NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16 x 5 5/8 bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 8.00 x 12.00 x 11.00 Inches | Weight: 7.00 pounds
See On Amazon #22
NEW FLOWMASTER 40 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH
Asin: B08HSGN354
Excellent Street/Strip And Off Road Application.
Aggressive Sound Exterior Exhaust Tone.
Noticeable Interior Resonance.
Features
- Durable fully welded 16 gauge aluminized steel
- Noticeable interior resonance
- Excellent Street/Strip and Off Road application
- Aggressive Sound Exterior Exhaust Tone
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 4.50 x 20.40 x 10.10 inches | Weight: 9.00 Pounds
See On Amazon #23
NEW HOLLEY QUICK FUEL 750 CFM BRAWLER RACE CARBURETOR,RED BILLET,BLACK, MECHANICAL SECONDARIES,COMPATIBLE WITH 4150 MODELS
Asin: B08T57HXL9 | Model: QFT-BR-67331 | PartNumber: QFT-BR-67331
Features: The Latest Technology In Air/Fuel Calibrations For Street Or Race Engine Demands | Mechanical Secondaries | Dual Inlet Fuel Bowls With Sight Glass Windows For Safe & Easy Float Adjustments | Changeable Idle & High Speed Air Bleeds For Easy Tuning Along With 4-Corner Idle Adjustment On Mechanical Secondary Models.
Note: This Model Of Carburetor Has The Square Bore Flange Bolt Pattern. Replaces Holley, Edelbrock, Carter Afb & Autolite Style Carburetors With 5 3/16" X 5 5/8" Bolt Pattern. Spreadbore Style Intake Manifolds Need An Adapter To Install This Carburetor. Similar To Mr. Gasket #1932..
Performance Models Include Billet Metering Blocks & Throttle Bodies With Precision Throttle Shafts To Ensure Long Term Performance | Black Coated Finish For Corrosion Protection & Good Looks.
The 3Rd Phase Of New Brawler Carburetors Build On The Success Of The Originals By Adding More Cfm Sizes & A Black Coated Finish With Red Billet Metering Blocks & Throttle Bodies. Brawlers Come With The Latest Technology In Air/Fuel Calibrations For Modern Street Or Race Engine Demands. They Are All Made From Light-Weight Aluminum Components & Offer All The Tunability That You Would Find From More Expensive Carburetors In The Market..
Features
- Brand New Holley Quick Fuel 750 CFM Brawler Race Carburetor, Red Billet & Black Finish, Mechanical Secondaries, Compatible with 4150 Models (Holley Part #BR-67331)
- The 3rd phase of new Brawler carburetors build on the success of the originals by adding more CFM sizes & a black coated finish with red billet metering blocks & throttle bodies. Brawlers come with the latest technology in air/fuel calibrations for modern street or race engine demands. They are all made from light-weight aluminum components & offer all the tunability that you would find from more expensive carburetors in the market.
- Features: The latest technology in air/fuel calibrations for street or race engine demands | Mechanical secondaries | Dual inlet fuel bowls with sight glass windows for safe & easy float adjustments | Changeable idle & high speed air bleeds for easy tuning along with 4-corner idle adjustment on mechanical secondary models
- Performance models include billet metering blocks & throttle bodies with precision throttle shafts to ensure long term performance | Black coated finish for corrosion protection & good looks
- NOTE: This model of carburetor has the square bore flange bolt pattern. Replaces Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16 x 5 5/8 bolt pattern. Spreadbore style intake manifolds need an adapter to install this carburetor. Similar to Mr. Gasket #1932.
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 11.50 x 12.50 x 6.00 Inches | Weight: 7.50 Pounds
See On Amazon #24
NEW BILSTEIN FRONT & REAR SHOCKS FOR 88-99 4WD CHEVY K1500 TRUCKS & GMC K1500 SIERRA TRUCKS, 46MM GAS PRESSURE SHOCK ABSORBERS, TRUCKS, BASE CHEYENNE LS SCOTTSDALE SILVERADO SPORT SL SLE SLS SLT SLX
Asin: B01BHCNT3E | Model: 4600 Series | PartNumber: 4600 Series
Bilstein 4600 Series Shock Absorbers And Struts Are Designed Specifically To Help Your Truck, Van Or Suv Reach Its Pinnacle In Ride Performance And Handling, While Still Providing The Comfortable Ride That Has Come To Be Expected From Bilstein | * A 4600 Series Equipped Vehicle Offers Superior Control Compared To Conventional Alternatives, Allowing You To Keep Cargo Secure, From Your Kids To Work Equipment, Mile After Mile.
Compatible With | * : | * K1500: | * 1988-1999 4Wd, Including Base, Cheyenne, Ls, Scottsdale, Silverado, Sport, And Wt | * : | * K1500 Sierra: | * 1988-1998 4Wd, Including Base, Sl, Sle, Sls, Slt, Slx, Special, And Sport | *** Bilstein's Old Part Numbers On These Shocks Were F4-Be5-A405-H0 On The Fronts And F4-B46-2043-H0 Or F4-B46-2043-H1 On The Rears ***.
Utilizing Our Patented Design, The Dampers Allow The Vehicle To Glide Over Every Type Of Road Surface You May Encounter While Maintaining Complete Command At All Times | * These Dampers Are The Least Expensive And Most Effective Upgrade To Extend The Service Life Of Any Vehicle Out On The Road Today.
Includes: | * 2 - Bilstein # 24-104050 Front Shocks, 46Mm | * 2 - Bilstein # 24-020435 Rear Shocks, 46Mm.
Features
- Brand New Set of Bilstein Monotube Shock Absorbers, 2 Fronts and 2 Rear
- Includes: | * 2 - Bilstein # 24-104050 Front Shocks, 46mm | * 2 - Bilstein # 24-020435 Rear Shocks, 46mm
- Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from Bilstein | * A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure, from your kids to work equipment, mile after mile
- Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times | * These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today
- compatible with | * : | * K1500: | * 1988-1999 4WD, including Base, Cheyenne, LS, Scottsdale, Silverado, Sport, and WT | * : | * K1500 Sierra: | * 1988-1998 4WD, including Base, SL, SLE, SLS, SLT, SLX, Special, and Sport | *** Bilstein's old part numbers on these shocks were F4-BE5-A405-H0 on the Fronts and F4-B46-2043-H0 or F4-B46-2043-H1 on the Rears ***
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 10.00 x 30.00 x 10.00 Inches | Weight: 0.00 pounds
See On Amazon #25
NEW BILSTEIN FRONT & REAR SHOCKS FOR 07-18 JEEP WRANGLER JK, 46MM GAS PRESSURE SHOCK ABSORBERS, ISLANDER MOUNTAIN RUBICON SAHARA SPORT UNLIMITED X X-S, 2007 2008 2009 2010 2011 2012 2013 2014 2015
Asin: B01BN343T6
Bilstein 4600 Series Shock Absorbers And Struts Are Designed Specifically To Help Your Truck, Van Or Suv Reach Its Pinnacle In Ride Performance And Handling, While Still Providing The Comfortable Ride That Has Come To Be Expected From Bilstein | * A 4600 Series Equipped Vehicle Offers Superior Control Compared To Conventional Alternatives, Allowing You To Keep Cargo Secure, From Your Kids To Work Equipment, Mile After Mile.
Compatible With | * : | * 2007-2014 Wrangler Jk, Including Islander, Mountain, Rubicon, Sahara, Sport, Unlimited Islander, Unlimited Mountain, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, And X-S | *** Bilstein's Old Part Numbers On These Shocks Were F4-Be5-E172-H0 On The Fronts And F4-Be5-E173-H0 On The Rears.
Utilizing Our Patented Design, The Dampers Allow The Vehicle To Glide Over Every Type Of Road Surface You May Encounter While Maintaining Complete Command At All Times | * These Dampers Are The Least Expensive And Most Effective Upgrade To Extend The Service Life Of Any Vehicle Out On The Road Today.
Includes: | * 2 - Bilstein # 24-141727 Front Shocks, 46Mm | * 2 - Bilstein # 24-141734 Rear Shocks, 46Mm.
Features
- Brand New Set of Bilstein Monotube Shock Absorbers, 2 Fronts and 2 Rear
- Includes: | * 2 - Bilstein # 24-141727 Front Shocks, 46mm | * 2 - Bilstein # 24-141734 Rear Shocks, 46mm
- Bilstein 4600 Series Shock Absorbers and Struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expected from Bilstein | * A 4600 Series equipped vehicle offers superior control compared to conventional alternatives, allowing you to keep cargo secure, from your kids to work equipment, mile after mile
- Utilizing our patented design, the dampers allow the vehicle to glide over every type of road surface you may encounter while maintaining complete command at all times | * These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today
- compatible with | * : | * 2007-2014 Wrangler JK, including Islander, Mountain, Rubicon, Sahara, Sport, Unlimited Islander, Unlimited Mountain, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, and X-S | *** Bilstein's old part numbers on these shocks were F4-BE5-E172-H0 on the Fronts and F4-BE5-E173-H0 on the Rears
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Bilstein
Dimensions: 10.00 x 28.00 x 10.00 Inches | Weight: 27.00 Pounds
See On Amazon #26
MSD DIGITAL 6A IGNITION CONTROL BOX,NO REV LIMITER,RED,520-540V PRIMARY VOLTAGE,45,000V SECONDARY VOLTAGE,COMPATIBLE WITH 4-6-8 CYLINDER ENGINES
Asin: B089Q828YF
The Digital 6A Is A Microprocessor Controlled, Capacitive Discharge Ignition That Multi Sparks Up To 3,000 Rpm Providing Easy Starts, A Clean, Smooth Idle And Quick Throttle Response By Optimizing Your Engines Efficiency. Above 3,000 Rpm, A Single Spark Stays Lit For Up To 20 Degrees Of Crankshaft Rotation Ensuring A Complete Burn Of The Air / Fuel Mixture In Every Cylinder..
Note: Carb Eo: D-40-43.
A Sealed, Locking Connector Keeps The Minimal Wiring Of The 6A Tidy For A Clean Installation In All Applications. It Can Be Run On 4, 6 & 8 Cylinder Engines With A 12 Volt Negative Ground Electrical System And Can Be Triggered With Breaker Points, An Electronic Amplifier Or Magnetic Pickups..
If You Are Looking To Improve The Performance Of Your Modified Mill, We Have The Answer. Whether You Have Done A Cam Swap, Or Bolted On A Carb, Intake And Headers, The 6A Is A Surefire Way To Harness All The Ponies Under Your Hood..
Features
- Brand New MSD Digital 6A Ignition Control Box, 520-540 Volts, Compatible with 4,6 & 8 Cylinder Engines, Produced by Holley Performance Products (Part #6201)
- If you are looking to improve the performance of your modified mill, we have the answer. Whether you have done a cam swap, or bolted on a carb, intake and headers, the 6A is a surefire way to harness all the ponies under your hood.
- The Digital 6A is a microprocessor controlled, capacitive discharge ignition that multi sparks up to 3,000 RPM providing easy starts, a clean, smooth idle and quick throttle response by optimizing your engines efficiency. Above 3,000 RPM, a single spark stays lit for up to 20 degrees of crankshaft rotation ensuring a complete burn of the air / fuel mixture in every cylinder.
- A sealed, locking connector keeps the minimal wiring of the 6A tidy for a clean installation in all applications. It can be run on 4, 6 & 8 cylinder engines with a 12 volt negative ground electrical system and can be triggered with breaker points, an electronic amplifier or magnetic pickups.
- NOTE: CARB EO: D-40-43
- See more on Amazon...
Brand: Southwest Speed
Dimensions: 3.70 x 9.00 x 7.60 Inches | Weight: 2.65 Pounds
See On Amazon