TMAX - Buying Guide
Last Updated: 05/04/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
TMAX 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B09SXP6GNB | Model: 73009 | PartNumber: 73009 | Ean: 0767531510339 | UPC: 767531510339
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/2" (12.7Mm) 60 Grit, 1/2" (12.7Mm) Diameter; 2 Piece 1/2" (12.7Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools).
Features
- 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 60 coarse
- 100 piece 1/2 (12.7mm) 60 Grit, 1/2 (12.7mm) Diameter; 2 piece 1/2 (12.7mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools)
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.00 x 6.00 x 4.00 inches | Weight: 4.00 ounces
See On Amazon #2
TMAX Foot Pedal Control Switch for Dremel and other Rotary Tools
Asin: B09G1PJNFM | Model: 73159 | PartNumber: 73159 | Ean: 0767531680452 | UPC: 767531680452
Max Speed: 5,000 To 15,000 Rpm.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Voltage: 110-250V 50Hz/60Hz | Provide Variable Speed To Connected Tools When Stepping The Pedal With Varied Pressure. Heavy Duty For Extended Use..
Same Switch That Comes In Our Grinder And Switch Set.
Features
- Foot Pedal Control Switch for Compatible Power Tools
- Same switch that comes in our Grinder and Switch Set
- Max speed: 5,000 to 15,000 RPM
- Voltage: 110-250V 50Hz/60Hz | provide variable speed to connected tools when stepping the pedal with varied pressure. Heavy duty for extended use.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 5.25 x 7.75 x 4.25 inches | Weight: 21.00 ounces
See On Amazon #3
TMAX 1/4 Inch T-Handle Hex Bit Holder Screwdriver, 5 Inch Long
Asin: B09Z33NZK5 | Model: 73165 | PartNumber: 73165 | Ean: 0767531522516 | UPC: 767531522516
3.5 Long Inch Shaft.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Rubberized Soft Grip Handle | T Shaped Handle For Greater Control And Torque.
Holds Standard 1/4" Bits.
Features
- 1/4 Inch T-Handle Hex Bit Holder, 5-Inch long
- Holds standard 1/4 bits
- 3.5 long inch shaft
- Rubberized soft grip handle | T shaped handle for greater control and torque
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.00 x 4.50 x 2.50 inches | Weight: 10.00 ounces
See On Amazon #4
TMAX IP55 3 Inch Long Black Impact Torx Plus 6 Point Socket Bit 1/2 Inch Square Drive Auto Repair Tool
Asin: B09Z35VSR9 | Model: 71384 | PartNumber: 71384 | Ean: 0767531892138 | UPC: 767531892138
1/2" (12.7Mm) Sqaure Drive With Drive Release Holes..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Drop Forged Black Chrome Moly Steel (Cr-Mo). | Industrial Grade Quality. Suitable For Air Tools And Electric Tools..
The Socket Bits Are 3-1/8" (80Mm) Long..
Features
- Impact Torx Plus 6 point Socket Bit IP-55
- The socket bits are 3-1/8 (80mm) long.
- 1/2 (12.7mm) Sqaure Drive with drive release holes.
- Drop forged black chrome moly steel (CR-MO). | Industrial grade quality. Suitable for air tools and electric tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 4.00 ounces
See On Amazon #5
TMAX 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B09Z33CLCB | Model: 73607 | PartNumber: 73607 | Ean: 0767531525807 | UPC: 767531525807
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/4" (6.35Mm) 60 Grit, 1/4" (6.35Mm) Diameter; 2 Piece 1/4" (6.35Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools). The Sand Drum Diameter Is The Inner Diameter Excluding The Sand Paper Thickness..
Features
- 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel for dremel grit 60 coarse
- 100 piece 1/4 (6.35mm) 60 Grit, 1/4 (6.35mm) Diameter; 2 piece 1/4 (6.35mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools). The sand drum diameter is the inner diameter excluding the sand paper thickness.
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 6.00 x 4.00 inches | Weight: 0.13 pounds
See On Amazon #6
TMAX Abc7/19Pt Wheel Lock Lugnut Anti-Theft Lug Nut Screw Removal Key Socket S3057 for Vw Audi
Asin: B09Z35PF32 | Model: Abc719Pt | PartNumber: Abc719Pt | Ean: 0767531816530 | UPC: 767531816530
To Determine Which Key You Need, Visually Match The Key Pattern To The Locking Lug Nuts On Your Vehicle. Key Compatibility Is Not Based On The Make, Model Or Year Of The Vehicle. When Removing Your Lug Nuts, It Is Best To Evenly Loosen Each Nut On The Wheel As Opposed To Completely Removing One At A Time, This Helps Reduce Pressure On The Remaining Nuts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Individual Pieces Now Available From Our 23Pc Set! | Not Intended For Use With Impact Wrench.
They Are Used To Remove Wheel Nuts Screw On Car/Truck/Suv.
Features
- TMAX Abc7/19Pt Wheel Lock Lugnut Anti-Theft Lug Nut Screw Removal Key Socket S3057 for Vw Audi
- They are used to remove wheel nuts screw on car/truck/SUV
- To determine which key you need, visually match the key pattern to the locking lug nuts on your vehicle. Key compatibility is not based on the make, model or year of the vehicle. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time, this helps reduce pressure on the remaining nuts.
- Individual pieces now available from our 23pc set! | Not intended for use with impact wrench
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.75 x 1.25 x 0.75 inches | Weight: 2.00 ounces
See On Amazon #7
TMAX 10 pc Nylon Plastic Bristle 3/4 Inch Flat Wire Brush #403 1/8 Inch Shank for Dremel Rotary Tools
Asin: B09Z343HG6 | Model: 73409 | PartNumber: 73409 | Ean: 0767531793367 | UPC: 767531793367
Overall Length Is 43Mm (1 3/4 Inch); Shank Diameter : 3.17Mm (1/8 Inch).
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Wheel Diameter : 19Mm (3/4 Inch); Wheel Thickness : 1Mm To 1.5Mm | Suitable For Removing Rust And Oxidation..
They Will Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" (3.175Mm) Collet..
Features
- New 10 pieces Nylon Plastic flat wire BRUSHES
- They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 (3.175mm) collet.
- Overall length is 43mm (1 3/4 inch); Shank diameter : 3.17mm (1/8 inch)
- Wheel diameter : 19mm (3/4 inch); Wheel thickness : 1mm to 1.5mm | Suitable for removing rust and oxidation.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 inches | Weight: 4.10 ounces
See On Amazon #8
TMAX 20 pc 4 mm (5/32 Inch) Bullet Rubber Rotary Tool Polishing Burr with 3/32 Inch Shank for Dremel Rotary Tools
Asin: B09Z34QF8Z | Model: 73122 | PartNumber: 73122 | Ean: 0767531889961 | UPC: 767531889961
The Heads Are In Bullet Shape With Diameter Of 4 Mm..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
All 3/32" Shank. | Fits Rotary And Jewerly Tools That Accept 3/32" Shank Size..
20 Pieces Of Rubber Polishing Burrs For All Your Polishing Needs..
Features
- 20pcs 3/32" 4mm Bullet RUBBER Rotary Tool Polishing Burr with 3/32 inch Shank for Dremel and compatible Rotary Tools
- 20 pieces of RUBBER polishing burrs for all your polishing needs.
- The heads are in bullet shape with diameter of 4 mm.
- All 3/32 shank. | Fits rotary and jewerly tools that accept 3/32 shank size.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 4.00 x 3.50 inches | Weight: 0.13 Pounds
See On Amazon #9
TMAX Carbide Downcut Inlay Router Bit 1/32 Inch Diameter
Asin: B09Z355LKQ | Model: 73145 | PartNumber: 73145 | Ean: 0767531626665 | UPC: 767531626665
Comes In Convenient Case With Compartment For Each Bit..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Carbide Router Bit Remain Sharp And Give A Superior Cut On Wood. | Spiral Bits Give Very Clean Cuts..
1.5" Length. 1/8" Shank Diameter..
Features
- Carbide Downcut Inlay Router Bit 1/32" dia.
- 1.5 length. 1/8 shank diameter.
- Comes in convenient case with compartment for each bit.
- Carbide router bit remain sharp and give a superior cut on wood. | Spiral bits give very clean cuts.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.50 x 3.00 inches | Weight: 2.00 ounces
See On Amazon #10
TMAX 20 pc T20 Torx 6 Point Impact Ready 2 Inch Screwdriver magnetic
Asin: B0C7Z767QB | Ean: 0767531797297 | UPC: 767531797297
Bits Are Impact Ready. Suitable For Both Hand Tool And Electric Tool.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Comes In Convenient Storage Case.
Made Of S2 Steel For Maximum Durability..
Features
- T20 Torx 6 Point Impact Ready 2 Inch Screwdriver magnetic
- Made of S2 steel for maximum durability.
- Bits are impact ready. Suitable for both hand tool and electric tool
- Comes in convenient storage case
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 5.00 x 3.00 inches | Weight: 0.63 pounds
See On Amazon #11
TMAX T40 3 Inch Long Torx Star 6 Point Black Impact Bit Socket Auto Repair Tool 1/2 Inch Square Drive
Asin: B09SXP3MTZ | Model: 71348 | PartNumber: 71348 | Ean: 0767531707203 | UPC: 767531707203
1/2" (12.7Mm) Sqaure Drive With Drive Release Holes..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Drop Forged Black Chrome Moly Steel (Cr-Mo). | Industrial Grade Quality. Suitable For Air Tools And Electric Tools..
The Socket Bit Is 3-1/8" (80Mm) Long..
Features
- Impact Torx Star 6 point Socket Bit T40
- The socket bit is 3-1/8 (80mm) long.
- 1/2 (12.7mm) Sqaure Drive with drive release holes.
- Drop forged black chrome moly steel (CR-MO). | Industrial grade quality. Suitable for air tools and electric tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 4.00 ounces
See On Amazon #12
TMAX 10mm Flex-Head Ratcheting Combination Wrench, 72-Teeth, Cr-V Constructed, Nickel Plating
Asin: B0CQF96VM6 | Ean: 0767531982525 | UPC: 767531982525
180° Flex-Head Allows For Work In Hard To Reach Places.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Made Of Chrome Vanadium Steel.
10Mm Open End And Ratcheting Box End.
Features
- 10mm Flex-Head Ratcheting Combination Wrench, 72-Teeth, Cr-V Constructed, Nickel Plating
- 10mm open end and ratcheting box end
- 180 Flex-Head allows for work in hard to reach places
- Made of chrome vanadium steel
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.25 x 6.25 x 0.75 inches | Weight: 0.19 pounds
See On Amazon #13
TMAX 30 pcs Fine Diamond Coated Burrs Glass Drill Bit Grit 300 with 1/8 Inch Shank for Dremel and Other Rotary Tools
Asin: B09Z33R7NQ | Model: 71069 | PartNumber: 71069 | Ean: 0767531579794 | UPC: 767531579794
Includes 1/16" (1.59Mm) Diamond Drill Bits In A Fine Grit, For Drilling Glass, Shells, Tile And Stone..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Overall Length Is 40Mm To 50Mm (1 5/8 Inch To 2 Inch) | They Will Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" Collet. Included 1/16" (1.59Mm) Diamond Drill Bits In A Fine Grit, For Drilling Glass, Shells, Tile And Stone. Overall Length Is 40Mm To 50Mm (1 5/8 Inch To 2 Inch). Shank Diameter : 3.17Mm (1/8 Inch). Premium Type Diamond Coated In Grit 300 (Fine). Suitable For Glass, Marble, Rock Or Jewelry..
They Will Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" Collet. Shank Diameter : 3.17Mm (1/8 Inch).
Features
- New box set of 30 pieces diamond coated burrs with pointed heads in box set.
- They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 collet. Shank diameter : 3.17mm (1/8 inch)
- Includes 1/16 (1.59mm) diamond drill bits in a fine grit, for drilling glass, shells, tile and stone.
- Overall length is 40mm to 50mm (1 5/8 inch to 2 inch) | They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 collet. Included 1/16 (1.59mm) diamond drill bits in a fine grit, for drilling glass, shells, tile and stone. Overall length is 40mm to 50mm (1 5/8 inch to 2 inch). Shank diameter : 3.17mm (1/8 inch). Premium type diamond coated in GRIT 300 (fine). Suitable for glass, marble, rock or jewelry.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 6.00 x 3.00 Inches | Weight: 5.00 ounces
See On Amazon #14
TMAX 2 pc 1/8 inch M35 Cobalt Stubby Drill Bits, 1/4" Hex Shank for Quick Chucks & Impact Drivers
Asin: B0CQF5YGRK | Ean: 0767531563366 | UPC: 767531563366
Made From M35 Cobalt Steel.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
135° Split Point Multi-Blades Drill Tip.
Suitable For Drilling Stainless Steel And Various Hardened Metals Such As Cast Iron, Titanium, Bronze, Aluminium, Etc. All Drill Bits Come With One Piece 1/4-Inch Hex Shank Compatible With Standard And Quick Change Chucks And Drivers.
Features
- 2 pc 1/8 inch M35 Cobalt Stubby Drill Bits, 1/4" Hex Shank for Quick Chucks & Impact Drivers
- Suitable for drilling stainless steel and various hardened metals such as cast iron, titanium, bronze, aluminium, etc. All drill bits come with one piece 1/4-inch hex shank compatible with standard and quick change chucks and drivers
- Made from M35 Cobalt steel
- 135 split point multi-blades drill tip
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.75 x 1.00 Inches | Weight: 0.06 pounds
See On Amazon #15
TMAX 10 pc #401 Screw Mandrel for Felt Polishing Wheel Or Cone Tip with 1/8 Inch Shank for Dremel Rotary Tools
Asin: B09MBQV7X1 | Model: 71517 | PartNumber: 71517 | Ean: 0767531869307 | UPC: 767531869307
1/8" (3.175Mm) Shank Size. For Dremel And Other Rotary Tools..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
A Shank With Screw Like Head. | Shiny And Durable..
Capable Of Holding Various Polishing Tips Including Wheel And Cone Shapes..
Features
- 10pc Screw Bit Mandrel 1/8 inch Shank Felt Polishing Tip Holder.
- Capable of holding various polishing tips including wheel and cone shapes.
- 1/8 (3.175mm) shank size. for Dremel and other Rotary Tools.
- A shank with screw like head. | Shiny and durable.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 inches | Weight: 2.00 ounces
See On Amazon #16
TMAX 10 pc 2 mm (5/64 Inch) Cut Off Wheel Screw Mandrel 1/8 Inch Shank Holder for Dremel Rotary Tools
Asin: B09MBQF5QJ | Model: 71264 | PartNumber: 71264 | Ean: 0767531994139 | UPC: 767531994139
Used To Hold Cutoff Wheel.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
1/8" (3.175Mm) Shank Size For Dremel And Other Rotary Tools..
10 Piece 2Mm Screw Mandrel.
Features
- 10pc 2mm Screw Mandrel 1/8 inch Shank Cut-off Wheel Holder
- 10 piece 2mm screw mandrel
- used to hold cutoff wheel
- 1/8 (3.175mm) shank size for Dremel and other Rotary Tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.00 x 3.00 inches | Weight: 2.00 ounces
See On Amazon #17
TMAX Rotary Tool Hold Hanger Stand Clamp for Dremel Foredom and Other Rotary Tools
Asin: B09SXP31R6 | Model: 73005 | PartNumber: 73005 | Ean: 0767531537374 | UPC: 767531537374
Hanger Swivels 360-Degrees For Superior Versatility And Easy Access. Steel Rod And Hanger With Mirror Chrome Finish; Rugged Non-Conductive, Non-Scratch Abs Base..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
The Item On Sale Is The Rotary Tool Holder Only. Please See Other Listings For Rotary Tool, Accessories And Flexible Shaft..
3-Section Steel Rod Allows Customized Tool Height, Adjusts Easily From 10 - 22 Inches. Heavy-Duty Table-Bench Clamp Can Be Used Horizontal Or Vertical; 2-1/2 Inch Clamping Capacity.
Features
- Super-handy rotary tool accessory - keeps tool handy, out of the way; essential for flex shaft use
- 3-section steel rod allows customized tool height, adjusts easily from 10 - 22 inches. Heavy-duty table-bench clamp can be used horizontal or vertical; 2-1/2 inch clamping capacity
- Hanger swivels 360-degrees for superior versatility and easy access. Steel rod and hanger with mirror Chrome finish; rugged non-conductive, non-scratch ABS base.
- The item on sale is the Rotary Tool Holder only. Please see other listings for rotary tool, accessories and Flexible Shaft.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 3.00 x 10.00 x 3.00 Inches | Weight: 13.00 ounces
See On Amazon #18
TMAX 250pc Solder Seal Wire Connectors, Automotive Heat Shrink Butt Connectors Solder Sleeve Waterproof Insulated Electrical Wire Terminals
Asin: B09WY45ZYW | Model: 77005 | PartNumber: 77005 | Ean: 0767531783290 | UPC: 767531783290
Durability: Solder Seal Allows For Smooth Flowing Of The Wires And A Strong Connection. The Insulation Shrinks At A Ratio Of 3:1, Creating A Seal. Package Includes: 40X White Connectors, 100X Red Connectors, 90X Blue Connectors, And 20X Yellow Connectors. Comply With All Relevant European Standards..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Wide Applications: These Solder Seal Wire Connectors Are Waterproof, And Therefore Have A Wide Range Of Potential Uses. These Include Auto, Boat, Home, Trailer, Rv, Or Motorcycle. Great For A Variety Of Projects For Professionals Or Diy Enthusiasts..
Easy To Use: No Need To Crimp, Just Apply Heat Using A Heat Gun And The Wires Will Be Connected Tightly And Securely..
Features
- TMAX 250pc Solder Seal Wire Connectors, Automotive Heat Shrink Butt Connectors Solder Sleeve Waterproof Insulated Electrical Wire Terminals
- EASY TO USE: No need to crimp, just apply heat using a heat gun and the wires will be connected tightly and securely.
- DURABILITY: Solder seal allows for smooth flowing of the wires and a strong connection. The insulation shrinks at a ratio of 3:1, creating a seal. Package includes: 40x white connectors, 100x red connectors, 90x blue connectors, and 20x yellow connectors. Comply with all relevant European standards.
- WIDE APPLICATIONS: These solder seal wire connectors are waterproof, and therefore have a wide range of potential uses. These include auto, boat, home, trailer, RV, or motorcycle. Great for a variety of projects for professionals or DIY enthusiasts.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.75 x 10.25 x 7.25 inches | Weight: 9.00 ounces
See On Amazon #19
TMAX 0.5 Micron 30,000 Grit 5 Gram Diamond Lapping Paste Polishing Compound Syringe Final Finish for Jewelry, Metal, Ring, Gemstone, Glass, Coin
Asin: B09Z356C3W | Ean: 0767531963753 | UPC: 767531963753
Use Our Products As: Buffing Compound, Polishing Compound, Stropping Compound, Abrasive Paste, Metal Polishing Compound, Epoxy Polishing Paste, Lapidary Diamond Paste, Resin Polishing, Rock Polishing, Granite Compound. Works For Both Manual And Machine Polishing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Suitable For: Jewellery, Gemstones, Steel, Hard Metal, Aluminium, Zinc, Glass, Ceramics, Marble, Wood, Granite, Simichrome, Rock, Plastic, Brass, Acrylic. All Metallurgical Purpose. | Includes: 1 Pc 0.5 Micron- Final Polish (Creamy). Please See Our Other Listings For Different Grit Sizes..
Easy To Use: Our Diamond Lapping Paste Syringes Allow You To Accomplish Your Polishing Needs While Avoiding Contamination Due To Their Practical Design. They Are Best Used With Wool Polishers For Polishing..
Features
- 0.5 Micron 30,000 Grit 5 Gram Diamond Lapping Paste Polishing Compound Syringe Final Finish
- EASY TO USE: Our diamond lapping paste syringes allow you to accomplish your polishing needs while avoiding contamination due to their practical design. They are best used with wool polishers for polishing.
- USE OUR PRODUCTS AS: buffing compound, polishing compound, stropping compound, abrasive paste, metal polishing compound, epoxy polishing paste, lapidary diamond paste, resin polishing, rock polishing, granite compound. Works for both manual and machine polishing.
- SUITABLE FOR: jewellery, gemstones, steel, hard metal, aluminium, zinc, glass, ceramics, marble, wood, granite, simichrome, rock, plastic, brass, acrylic. All metallurgical purpose. | INCLUDES: 1 pc 0.5 Micron- Final Polish (Creamy). Please see our other listings for different grit sizes.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.70 x 5.00 x 1.00 inches | Weight: 0.01 pounds
See On Amazon #20
TMAX 2 pc 10-24 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
Asin: B09Z376GDS | Model: 73137 | PartNumber: 73137 | Ean: 0767531659625 | UPC: 767531659625
Drill, Tap And Deburr In One Operation. Tapered Tap Design Prevents Thread Damage From Over-Drilling..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
One Piece Construction Guarantees Proper Drill For Tap Size. | 135 Self-Centering Split Point Tip. 10 Gauge (3.5Mm) Capacity. Usage Suggestions: Use Of Cutting Coil Recommended. Clean Tap Of Metal Chips To Extend Life. Reverse Drill To Back Out After Completing Tap..
Made Of High Speed M2 Steel. For Use With: Steel, Copper, Brass, Aluminum. Drill, Tap And Deburr In One Operation..
Features
- 2 pc 10-24 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
- Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation.
- Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling.
- One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.50 x 4.00 inches | Weight: 1.00 ounces
See On Amazon #21
TMAX Abc8/20Pt Wheel Lock Lugnut Anti-Theft Lug Nut Screw Removal Key Socket S3057 for Vw Audi
Asin: B0CN6H2SWV | Ean: 0767531565513 | UPC: 767531565513
To Determine Which Key You Need, Visually Match The Key Pattern To The Locking Lug Nuts On Your Vehicle. Key Compatibility Is Not Based On The Make, Model Or Year Of The Vehicle. When Removing Your Lug Nuts, It Is Best To Evenly Loosen Each Nut On The Wheel As Opposed To Completely Removing One At A Time, This Helps Reduce Pressure On The Remaining Nuts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Individual Pieces Now Available From Our 23Pc Set! Not Intended For Use With Impact Wrench..
They Are Used To Remove Wheel Nut Screws On Cars/Trucks/Suvs..
Features
- TEMO Abc8/20Pt Wheel Lock Lugnut Anti-Theft Lug Nut Screw Removal Key Socket S3057 for VW Audi
- They are used to remove wheel nut screws on cars/trucks/SUVs.
- To determine which key you need, visually match the key pattern to the locking lug nuts on your vehicle. Key compatibility is not based on the make, model or year of the vehicle. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time, this helps reduce pressure on the remaining nuts.
- Individual pieces now available from our 23pc set! Not intended for use with impact wrench.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.75 x 1.25 x 0.75 inches | Weight: 0.13 pounds
See On Amazon #22
TMAX Flexible Shaft Extension Cord for Rotary Tool Grinder 3148
Asin: B09FZR92W8 | Model: 73450 | PartNumber: 73450 | Ean: 0767531840306 | UPC: 767531840306
To Remove The Broken Shaft: First Pull Out Existing Handle From The Broken Shaft. The Handle Is Secured With Spring Load Metal Ball. Unscrew The Shaft Connector Clockwise From The Grinder ( Note That It Is Reverse Threaded). Pull Down The Metal Shaft Outer Shield To Expose Steel Inner Core. Unscrew The Inner Core From The Grinder Using Included L Bar..
The Shaft Is 3 Feet (1 Meter) Long With Heavy Duty Metal Outer Shield..
To Install The Replacement Shaft: Pull Out Steel Inner Core. Secure The Inner Core To The Grinder With The Included L Shape Bar Wrench. Screw The Shaft Connector Counter Closewise To The Grinder. Slide The End Of Inner Core Into The Groove Inside The Handle. Push Handle Back To The Shaft..
The Shaft Match Tmax Grinder Sku 3148. Handle Is Listed As A Separate Replacement Items..
Features
- TMAX Flexible Shaft Replacement for Grinder 3148 Drill Bit Extension Drill Drive Shaft Flexible Flex Shaft Extension Cord Rotary Tool for Drilling Grinding Polishing
- The shaft match TMAX grinder SKU 3148. Handle is listed as a separate replacement items.
- To remove the broken shaft: First pull out existing handle from the broken shaft. The handle is secured with spring load metal ball. Unscrew the shaft connector clockwise from the grinder ( Note that it is reverse threaded). Pull down the metal shaft outer shield to expose steel inner core. Unscrew the inner core from the grinder using included L bar.
- To install the replacement shaft: Pull out steel inner core. Secure the inner core to the grinder with the included L shape bar wrench. Screw the shaft connector counter closewise to the grinder. Slide the end of inner core into the groove inside the handle. Push handle back to the shaft.
- The shaft is 3 feet (1 meter) long with heavy duty metal outer shield.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.00 x 12.00 x 6.00 Inches | Weight: 0.63 Pounds
See On Amazon #23
TMAX 10 pc 1/8 to 1/2 Inch Premium Diamond Coated Drill Hole Saw 1/8 Inch Shank for Dremel Rotary Tools
Asin: B09Z34VWX2 | Model: 71082 | PartNumber: 71082 | Ean: 0767531709405 | UPC: 767531709405
Suitable For Use In Drill Hole On Glass, Marble, Tile Or Granite..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
All In 1/8" (3.175Mm) Shank Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" (3.175Mm) Collet | Working Length : 35Mm.
Manufactured By Grit 50 Premium Type Diamond Sands Specail For Cutting..
Features
- New assorted 3-12mm (1/8" to 1/2") PREMIUM diamond coated hole saw (total: 10 pcs, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 mm).
- Manufactured by GRIT 50 premium type diamond sands specail for cutting.
- Suitable for use in drill hole on glass, marble, tile or granite.
- ALL in 1/8 (3.175mm) shank fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 (3.175mm) collet | Working length : 35mm
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 Inches | Weight: 0.19 Pounds
See On Amazon #24
TMAX 10 pc High Speed Steel Hss Titanium Coated Router Bits Set 1/8 Inch Shank for Dremel Rotary Tools
Asin: B09Z338MDY | Model: 73003 | PartNumber: 73003 | Ean: 0767531832202 | UPC: 767531832202
The Set Include 10 Piece Router Bits With 1/8" (3.175Mm) Shank..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
They Have Different Head Shape/Size: 1/4" (6.35Mm) Rabbet Bit, 1/4" (6.35Mm) Piloted Corner Rounding Bit, 1/4" (6.35Mm) Piloted Cove Bit, 1/8" (3.175Mm) Straight Bit, 3/16" (4.76Mm) Straight Bit, | 1/4" (6.35Mm) Straight Bit, 5/16" (7.94Mm) Keyhole Bit, 1/4" (6.35Mm) Bead Groove Bit, 1/4" (6.35Mm) V-Groove Bit, 1/4" (6.35Mm) Core Box Bit..
The Router Bits For Dremel Or Other Rotary Tools. Titanium Nitride Coated For Longer Life; 1/4" (6.35Mm) Head Size; Includes Wood Storage Case.
Features
- 10 PC 1/8" (3.175mm) SHANK HSS TITANIUM ROUTER BITS for DREMEL
- The router bits for dremel or other rotary tools. Titanium Nitride Coated for longer life; 1/4 (6.35mm) Head Size; Includes wood storage case
- The set include 10 piece router bits with 1/8 (3.175mm) shank.
- They have different head shape/size: 1/4 (6.35mm) Rabbet Bit, 1/4 (6.35mm) Piloted Corner Rounding Bit, 1/4 (6.35mm) Piloted Cove Bit, 1/8 (3.175mm) Straight Bit, 3/16 (4.76mm) Straight Bit, | 1/4 (6.35mm) Straight Bit, 5/16 (7.94mm) Keyhole Bit, 1/4 (6.35mm) Bead Groove Bit, 1/4 (6.35mm) V-Groove Bit, 1/4 (6.35mm) Core Box Bit.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 2.00 x 4.00 x 4.00 inches | Weight: 6.70 ounces
See On Amazon #25
TMAX Rotary Tool Flex Shaft and Tool Hanger Work Set for Dremel Foredom and Other Rotary Tools
Asin: B09Z34JF6Q | Model: 73303 | PartNumber: 73303 | Ean: 0767531683972 | UPC: 767531683972
This Is A 42” Grinder Attachment Which Fits The Majority Of Rotary Tools. Connection Is For Head With 3/4" (19.05Mm) Thread..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Rotary Tool Hold Hanger Stand Clamp | Heavy-Duty Table-Bench Clamp Can Be Used Horizontal Or Vertical; 2-1/2" Clamping Capacity.
42" Rotary Grinder Tool Flexible Flex Shaft For Dremel And Compatible Rotary Tools.
Features
- Our rotary tool flex shaft and hanger now together in a box set.
- 42 Rotary Grinder Tool Flexible Flex Shaft for Dremel and compatible rotary tools
- This is a 42 grinder attachment which fits the majority of rotary tools. connection is for head with 3/4 (19.05mm) thread.
- Rotary Tool Hold Hanger Stand Clamp | Heavy-duty table-bench clamp can be used horizontal or vertical; 2-1/2 clamping capacity
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 2.50 x 11.00 x 6.00 inches | Weight: 20.00 ounces
See On Amazon #26
TMAX 240 pc Heavy Duty Nut and Bolt Assortment Set Kit M4 M5 M6 M8 M10
Asin: B09Z35KFT7 | Model: 73114 | PartNumber: 73114 | Ean: 0767531744147 | UPC: 767531744147
80Pc Lock Washers- 20Pc M4, 20Pc M5, 20Pc M6, 10Pc M8, 10 Pcm10.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Professional Assortment Of Necessary Parts And Pieces For Production Or Replacement. | All Held In Heavy Duty Case..
80Pc Hex Nuts: 20Pc M5, 10 Pc M8, 10Pc M10, 20Pc M6, 20Pc M4;.
Features
- 80pc Hex Head Bolts: 10pc M5x25, 10pc M5x16, 10pc M6x20, 5pc M10x16, 10pc M6x30, 5p M10x40, 5p M8x25, 5p M8x40, 10pc M4x20, 10pc M4x12
- 80pc Hex Nuts: 20pc M5, 10 pc M8, 10pc M10, 20pc M6, 20pc M4;
- 80pc lock Washers- 20pc M4, 20pc M5, 20pc M6, 10pc M8, 10 pcM10
- Professional assortment of necessary parts and pieces for production or replacement. | All held in heavy duty case.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.25 x 9.00 x 4.25 inches | Weight: 2.06 pounds
See On Amazon #27
TMAX Non Sparking PH0 phillips #0 screwdriver, 2-3/8 inch working length, Beryllium Bronze Copper Non Spark
Asin: B0CVW9PC62 | Ean: 0767531633069 | UPC: 767531633069
Specialized Applications Include: Hazardous Environments, Aerospace, Musical Instruments, And Precision Measurement Devices..
Easy To Read Size Markings -Size Etched Right On The Bit For Quick And Simple Identification.
Ergonomic Non Slip And Soft Handle, Allows You To Maintain Effective Use While Providing Good Comfort..
Beryllium Bronze (Aka Beryllium Copper) Is High Strength, Non-Sparking, And Non-Magnetic.
Features
- Nonsparking PH0 phillips #0 screwdriver, 2-3/8" working length, Beryllium Bronze Copper
- Beryllium Bronze (aka Beryllium Copper) is high strength, non-sparking, and non-magnetic
- Specialized applications include: hazardous environments, aerospace, musical instruments, and precision measurement devices.
- Ergonomic non slip and soft handle, allows you to maintain effective use while providing good comfort.
- EASY TO READ SIZE MARKINGS -Size Etched Right On the Bit For Quick and Simple Identification
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 1.38 x 8.27 x 3.94 inches | Weight: 0.09 pounds
See On Amazon #28
TMAX 10 pc Felt Burrs Wool Bob Polishing Grinding #9 Inverted Cone 10 mm 3/8 Inch with 1/8 Inch Shank for Dremel Rotary Tools
Asin: B0CN8QBX3P | Ean: 0767531732830 | UPC: 767531732830
Ideal For Smoothing Interior Surfaces, There Are 10 Interchangeable Pieces For The Rotary Grinding And Polishing Tool..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
10 Pieces Inverted Cone Head: 10Mm (3/8") Felt Diameter, 18Mm (11/16") Felt Length | All With 1/8" (3.175Mm) Mandrel.
Smooth And Refine Surfaces By Using These Felt Buffs To Polish Metal, Ceramics And Glass..
Features
- Rotary tool accessories, felt-tipped, made of top quality wool
- Smooth and refine surfaces by using these felt buffs to polish metal, ceramics and glass.
- Ideal for smoothing interior surfaces, there are 10 interchangeable pieces for the rotary grinding and polishing tool.
- 10 pieces Inverted Cone head: 10mm (3/8) felt diameter, 18mm (11/16) felt length | All with 1/8 (3.175mm) Mandrel
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 inches | Weight: 0.19 pounds
See On Amazon #29
TMAX 5 Pack 60 Grit Coarse Flap Wheel High Performance Aluminum Oxide 2 Inch Diameter 1 Inch High 1/4 Inch Shank
Asin: B0CN6GCB8W | Ean: 0767531649862 | UPC: 767531649862
Max Rpm 25,000..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Quickly Shape, Sand, And Grind With These 5 Premium Sanding Discs. | Includes 5 Premium 60 Grit Flap Wheel Sanding Discs..
High Performance: Aluminum Oxide Provides Durability, Heat Resistance, Moisture Resistance, Anti-Clogging, And Anti-Static..
Features
- 2" diameter x 1" (25.4mm) wide x 1/4" (6.35mm) shank.
- HIGH PERFORMANCE: Aluminum Oxide provides durability, heat resistance, moisture resistance, anti-clogging, and anti-static.
- Max RPM 25,000.
- Quickly shape, sand, and grind with these 5 Premium sanding discs. | Includes 5 Premium 60 grit Flap Wheel Sanding Discs.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 2.50 x 7.00 x 5.00 inches | Weight: 0.56 pounds
See On Amazon #30
TMAX 5/32 Inch 4mm Carbide Burr Drill Bit Wire Cutter Tire Repair Automobile Car Tool
Asin: B09Z332VT6 | Model: 73118 | PartNumber: 73118 | Ean: 0767531835890 | UPC: 767531835890
To Remove Excess Rubber And Smooth Jagged Steel Wire In Repair Areas. Use With Low Speed Tool..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
5/32" Diameter Shank Has 3 Flat Side To Prevent Slipping | 3" Total Length.
Choose The Proper Carbide Cutter And Plug Stem Based On Puncture Injury Size..
Features
- 5/32" Tire Repair Carbide WIRE Cutter
- Choose the proper carbide cutter and plug stem based on puncture injury size.
- To remove excess rubber and smooth jagged steel wire in repair areas. Use with low speed tool.
- 5/32 diameter shank has 3 flat side to prevent slipping | 3 total length
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TMAX | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.75 x 0.50 inches | Weight: 0.06 pounds
See On Amazon