TMaster - Buying Guide
Last Updated: 05/03/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
TMaster Low Pressure Hydraulic Brake Light Switch Street Hot Rod,for Any Brake System,Turns Brake Lights on at 45PSI
Asin: B0B9KB9JNX | Ean: 0780854479268 | UPC: 780854479268
This Switch Is A Must For Any Brake System With An Out-Dated Brake Light Switch..
1/8" Npt Brake Light Pressure Switch.
This Allows Faster Signal To Your Brake Lights. This Is The Perfect Solution To An Old, Corroded Switch And A Must For Any New Brake Job! Switch Is 1/8" Npt Used On Many Old Ford And Mopar Vehicles.
Switch Is Normally Open - Closes When This Modern Switch Turns Brake Lights On At 45Psi Rather Than 95Psi On Old Switches..
Features
- New low pressure hydraulic brake light switch.
- Switch is normally open - Closes when this modern switch turns brake lights on at 45PSI rather than 95PSI on old switches.
- This switch is a must for any brake system with an out-dated brake light switch.
- This allows faster signal to your brake lights. This is the perfect solution to an old, corroded switch and a must for any new brake job! Switch is 1/8 NPT used on Many old Ford and Mopar vehicles
- 1/8 NPT brake light pressure switch
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Dimensions: 2.00 x 2.00 x 2.00 inches
Warranty: 1 Year
See On Amazon #2
TMaster 12V Brake Booster Vacuum Pump kit - "Plug and Play" w/installation kit,Quiet high-performance 18'' to 25'' electric vacuum pump for brake booster
Asin: B0BL1HWHW9 | Model: 900-047 | PartNumber: 900-047 | Ean: 0780854479084 | UPC: 780854479084
【Easy Installation, Play And Plug】Each Vacuum Brake Booster Pump Is Pre-Wired And Tested On The Assembly Line To Ensure A Trouble-Free And Easy Installation..
【Noted 】After Installation, Please Make Sure Every Connection No Leakage, Or The Life Time Of Pump Will Be Shorter And The Vacuum Speed Will Be Longer..
【Any Issue,Contact Us 】Hooks Directly To Your Booster. All Wires Are Pre-Cut And Terminals Installed For Easier Installation. If You Are Confused During The Installation, Please Contact Us In Time, We Will Help You To Install Smoothly In The Form Of Pictures And Texts.
【Make Sure You Need It,Then Buy It 】Please Be Carefully Read Below Install Step ,And Make Sure Your Vehicle Need It ,Then Buy It ,Thanks.
【Package Contents】Vacuum Pump, Compact Tubing, Control Wire Harness,All Necessary Mounting Hardware Included And Instruction..
【More Quieter And More Efficient 】 This Vacuum Pump Used In The Compact Design Is A Rotary Vane Style Pump Which Is 60% Quieter Than The Noisy "Piston Style" Pumps On The Market Today. Can Be Mounted Under The Hood Or Inside The Car. This Vacuum Pump Is Also 30% More Efficient Giving You The Required Vacuum In Less Time Which Extends The Life Of The Pump & Makes Your Ride Much More Enjoyable..
Features
- NEW DESIGN delivering 25" of vacuum If you have an engine that does not produce at least 15" of vacuum at idle , then your brake pedal could be hard and you have no brakes... This pump will solve your problem.The pump operates when vacuum drops below 18 inches and turns off when over 25 inches, Ideal for vehicles with low vacuum such as supercharged, turbocharged or big cam engines
- More quieter and More efficient This vacuum pump used in the compact design is a Rotary Vane style pump which is 60% quieter than the noisy Piston Style pumps on the market today. Can be mounted under the hood or inside the car. This vacuum pump is also 30% more efficient giving you the required vacuum in less time which extends the life of the pump & makes your ride much more enjoyable.
- EASY INSTALLATION, PLAY AND PLUG Each vacuum brake booster pump is pre-wired and tested on the assembly line to ensure a trouble-free and easy installation.
- Package Contents Vacuum pump, compact tubing, control wire harness,all necessary mounting hardware included and instruction.
- Any issue,contact us Hooks directly to your booster. All wires are pre-cut and terminals installed for easier installation. If you are confused during the installation, please contact us in time, we will help you to install smoothly in the form of pictures and texts
- Make sure you need it,then buy it Please be carefully read below install step ,and make sure your vehicle need it ,then buy it ,Thanks
- Noted After installation, please make sure every connection no leakage, or the life time of pump will be shorter and the vacuum speed will be longer.
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Warranty: One and half year
See On Amazon #3
TMaster Universal Low Pressure Type Brake Light Switch and Pig Tail with Wire Connector
Asin: B0B9KDKCD8 | Model: 900-013 | PartNumber: 900-013 | Ean: 0780854479251 | UPC: 780854479251
45Psi-135Psi Closed,It Can Bear High Pressure About 20Mpa..
This Updated Version Of This Trusty Switch Is D.O.T. Compliant Which Includes Silicone Fluid Compatibility And It Is Capable Of 200 -300% More Cycles.
Universal Low Pressure For Any Brake Systems.
Switch Maybe Gold Zinc Rather Than Silver Zinc Plated.
Standard 1/8 Inch Pipe Thread..
Features
- A high quality switch with a much longer life than previous models available anywhere
- Standard 1/8 inch Pipe Thread.
- 45Psi-135Psi closed,it can bear high pressure about 20Mpa.
- Switch maybe gold zinc rather than silver zinc plated
- This updated version of this trusty switch is D.O.T. compliant which includes silicone fluid compatibility and it is capable of 200 -300% more cycles
- Universal Low Pressure for any brake systems
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Dimensions: 2.00 x 2.00 x 2.00 inches
See On Amazon #4
TMaster Prop Valve Kit Disc/Disc valve for Gmseries vehicle - Mtg Bracket - Lines - PV4 - fittings & bolts
Asin: B0B94QW8L6 | Model: 900-016 | PartNumber: 900-016 | Ean: 0780854479329 | UPC: 780854479329
This Valve Has A System Failure Switch That Will Alert You When Half Of Your Braking System Is Not Working Properly..
This Also Includes The Left Side Bracket Mounting Kit, Which Allows You To Mount This To The Left (Driver's Side) Of The Master Cylinder With Or Without Any Aftermarket Or Stock Booster Including 7" 8" 9" 10" And 11" Sizes..
Additionally, This Includes Two Hard Lines That Connect The Master Cylinder (With 1/2" & 9/16" Ports) To The Proportioning Valve. Gm Style Master Cylinder Only.
This Valve Is A Great Upgrade Over The Original And Is A Must When Upgrading From Drum To Disc Brakes. This Is A Universal Valve, And Will Work On Almost Any Chevy, Buick, Oldsmobile, Cadillac, Pontiac, Or Gm Trucks With A Gm Style Master Cylinder..
As More Force Is Applied To The Brakes And The Car Begins To Lean Forward, Less Braking Force Is Needed In The Rear. This Valve Decreases The Pressure To The Rear, Preventing Lock Up..
Features
- This is for a brand new brass Proportioning Valve and Side Bracket Mounting Kit with 1/2" Front and 9/16" Rear Brake Lines. This combination proportioning valve is for Disc / Disc applications. This valve performs all the necessary functions when using disc brakes in the front and disc brakes in the rear including the following
- As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up.
- This valve has a system failure switch that will alert you when half of your braking system is not working properly.
- This valve is a great upgrade over the original and is a must when upgrading from drum to disc brakes. This is a universal valve, and will work on almost any Chevy, Buick, Oldsmobile, Cadillac, Pontiac, or GM Trucks with a GM style Master Cylinder.
- This also includes the left Side Bracket Mounting Kit, which allows you to mount this to the Left (Driver's Side) of the master cylinder with or without any aftermarket or Stock Booster including 7 8 9 10 and 11 sizes.
- Additionally, this includes two hard lines that connect the master cylinder (with 1/2 & 9/16 ports) to the proportioning valve. GM style master cylinder only
- See more on Amazon...
Brand: TMaster | Manufacturer: YanYi
Dimensions: 2.00 x 6.00 x 5.00 inches
See On Amazon #5
TMaster 12V Brake Booster Vacuum Pump kit w/ 2L Reservoir - "Plug and Play" w/installation kit,Quiet high-performance 18'' to 25'' electric vacuum pump for brake booster
Asin: B0C2W5FC8C | Model: 900-047 | PartNumber: 900-047 | Ean: 0780854479039 | UPC: 780854479039
【Easy Installation, Play And Plug】Each Vacuum Brake Booster Pump Is Pre-Wired And Tested On The Assembly Line To Ensure A Trouble-Free And Easy Installation..
【Any Issue,Contact Us 】Hooks Directly To Your Booster. All Wires Are Pre-Cut And Terminals Installed For Easier Installation. If You Are Confused During The Installation, Please Contact Us In Time, We Will Help You To Install Smoothly In The Form Of Pictures And Texts.
Noted： Before You Buy It, See Below Instruction Step.Please Double Check There Are Enough Room To Assemble This Pump And Tank. The Tank Must Be Installed Due To The Pressure Sensor Is On The Tank..
【Package Contents】Vacuum Pump, 2L Reservoir, Compact Tubing, Control Wire Harness,All Necessary Mounting Hardware Included And Instruction..
【More Quieter And More Efficient 】 This Vacuum Pump Used In The Compact Design Is A Rotary Vane Style Pump Which Is 60% Quieter Than The Noisy "Piston Style" Pumps On The Market Today. Can Be Mounted Under The Hood Or Inside The Car. This Vacuum Pump Is Also 30% More Efficient Giving You The Required Vacuum In Less Time Which Extends The Life Of The Pump & Makes Your Ride Much More Enjoyable..
Features
- NEW DESIGN delivering 25" of vacuum If you have an engine that does not produce at least 15" of vacuum at idle , then your brake pedal could be hard and you have no brakes... This pump will solve your problem.The pump operates when vacuum drops below 18 inches and turns off when over 25 inches, Ideal for vehicles with low vacuum such as supercharged, turbocharged or big cam engines
- More quieter and More efficient This vacuum pump used in the compact design is a Rotary Vane style pump which is 60% quieter than the noisy Piston Style pumps on the market today. Can be mounted under the hood or inside the car. This vacuum pump is also 30% more efficient giving you the required vacuum in less time which extends the life of the pump & makes your ride much more enjoyable.
- EASY INSTALLATION, PLAY AND PLUG Each vacuum brake booster pump is pre-wired and tested on the assembly line to ensure a trouble-free and easy installation.
- Package Contents Vacuum pump, 2L reservoir, compact tubing, control wire harness,all necessary mounting hardware included and instruction.
- Any issue,contact us Hooks directly to your booster. All wires are pre-cut and terminals installed for easier installation. If you are confused during the installation, please contact us in time, we will help you to install smoothly in the form of pictures and texts
- Noted Before you buy it, See below instruction step.please double check there are enough room to assemble this pump and tank. The tank must be installed due to the pressure sensor is on the tank.
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Warranty: One and half year
See On Amazon #6
Pressure switch kit w/relay wire harness for brake booster Rotary Vacuum pump UP28 UP30 UP50 fit for Gmhella vacuum pump
Asin: B0BNY5397H | Model: 900-050 | PartNumber: 900-050 | Ean: 0780854479060 | UPC: 780854479060
We Offer You The Switch Which Is Used To New Energy Vehicles.But Noted Keep Away From Heat.The Working Temperature Is -40 To105 °C.
12 Volt Noted The Power Should Be 12V..
All Wiring Pre Assembled For Easy Installation,You Could Easy To Replace Your Original Pressure And Relay And Wire..
It Keeps The Pump From Constantly Running And Preserves Pump Life.Increases Idle Vacuum Up To 25"..
The Switch Wire Harness Fit For Most Of Electric Vacuum Pump And Hot Street Vehicle 79 Corvette/64 Mustang Etc.It Will Solve The Issue That Your Brake Pedal Could Be Hard And You Have No Brakes When Engine Is At Idle..
Features
- New design.Old mechanical type pressure switch is always have issues.The new pressure switch is at least 5 times longer life than old mechanical switch.
- The switch wire harness fit for most of electric vacuum pump and hot street vehicle 79 Corvette/64 Mustang etc.It will solve the issue that your brake pedal could be hard and you have no brakes when engine is at idle.
- We offer you the switch which is used to new energy vehicles.But noted keep away from heat.The working temperature is -40 to105 C
- It keeps the pump from constantly running and preserves pump life.Increases idle vacuum up to 25.
- 12 Volt Noted the power should be 12V.
- All wiring pre assembled for easy installation,you could easy to replace your original pressure and relay and wire.
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Warranty: 1 year
See On Amazon #7
TMaster Low Pressure Hydraulic Brake Light Switch Street Hot Rod,for Any Brake System,Turns Brake Lights on at 45PSI with Brass Tee Fitting, 3/8-24 inv. Flare(2), 1/8 NPT(1)
Asin: B0CTWMXZXK | Model: 900-052 | PartNumber: 900-052 | Ean: 0780854479022 | UPC: 780854479022
Easy Installation: The Switch Is Easy To Install And Requires No Modifications Or Special Tools. It Simply Replaces The Old Switch And Connects To The Existing Wiring, Making It A Convenient And Hassle-Free Upgrade..
Reliable And Durable: The Switch Is Designed To Meet Or Exceed Oem Specifications And Is Built To Last. It Is Resistant To Corrosion, Rust, And Wear, Ensuring That It Will Provide Reliable Performance For Years To Come..
Product Including One Switch And One T-Fitting. T-Fitting Is With A Top Port Of 1/8" Npt And Two Side Ports Of 3/8-24 Inv. Flare..
Improved Performance: The Brake Light Switch Is Designed To Provide A Faster Signal To The Brake Lights, Improving The Overall Safety Of Your Vehicle. It Operates At A Lower Pressure, Allowing For A Quicker Response Time, Which Can Help Prevent Accidents..
High-Quality Construction: The Brake Light Switch Is Made Of High-Quality Materials And Is Designed To Withstand The Harsh Conditions Of The Automotive Environment. It Is Durable And Reliable, Ensuring Long-Lasting Performance..
Features
- Universal Application: The brake light switch is designed to fit various types of vehicles, including cars, trucks, SUVs, and motorcycles. It is a direct replacement for many original equipment manufacturer (OEM) switches and is compatible with various makes and models.
- High-Quality Construction: The brake light switch is made of high-quality materials and is designed to withstand the harsh conditions of the automotive environment. It is durable and reliable, ensuring long-lasting performance.
- Easy Installation: The switch is easy to install and requires no modifications or special tools. It simply replaces the old switch and connects to the existing wiring, making it a convenient and hassle-free upgrade.
- Improved Performance: The brake light switch is designed to provide a faster signal to the brake lights, improving the overall safety of your vehicle. It operates at a lower pressure, allowing for a quicker response time, which can help prevent accidents.
- Reliable and Durable: The switch is designed to meet or exceed OEM specifications and is built to last. It is resistant to corrosion, rust, and wear, ensuring that it will provide reliable performance for years to come.
- Product including one switch and one T-fitting. T-fitting is with a top port of 1/8 NPT and two side ports of 3/8-24 inv. flare.
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Warranty: 1 year
See On Amazon #8
TMaster Plastic Repair Welder machine, only2s Plastic Welder Gun W/5 Types Staples, Hot Stapler Electric Soldering Iron for Car Bumper
Asin: B0B9L9N935 | Model: TM-70W | PartNumber: TM-70W | Ean: 0780854479220 | UPC: 780854479220
✅【2S Quick Heating】At The Heart Of This Plastic Welding Gun Is A 100-Watt Motor, Which Can Quickly Heat It In 1-2 Seconds. It Is More Efficient Than Most 50W Welding Machines On The Market. It Can Save You A Lot Of Time And Complete The Repair Project Quickly..
✅【Friendly Accessories & After-Sales Service】It Includes 1 X Plastic Welding Gun, 205 X Staples,1 X Solder Horn,1 X Suitcase For You. If You Just Need To Do A Single, Relatively Small Repair, This Kit Can Do The Job Well.Additionally, We Provide 24×7 Friendly Customer Support To Keep You Away From After-Sales Worries..
✅【Led Work Light】Led Work Light Provides Better Visibility In Darkened Work Conditions. The Bright Led Light Can Help In Dark Places Like Under The Car..
✅【5 Different Types Of Staples & Strong Torsion Resistance】This Welding Repair Tool Kit Is Designed To Repair The Plastic Parts Of The Car, It Will Not Hurt The Surface Of The Automobile, Very Sturdy And Keep A Long Service Life. Shock And Torsion Resistant After Repair. The Stainless Steel Clip Will Not Rust. 5 Different Types Of Staples Are Included For Different Types Of Repairs. The Kit Includes 205 Staples In Total..
Features
- Ideal for Car Repair It uses specially-designed staples to "stitch" large cracks back together. It's ideal for repairing cracked car bumpers and sportbike bodywork. The unit, which resembles a hot glue gun or soldering gun, uses heat to embed the included staples into plastic, reinforcing the area as it repairs. You can fix damaged bumpers, save hard-to-replace interior trim, or even do some custom work.
- 5 Different Types of Staples & Strong Torsion Resistance This welding repair tool kit is designed to repair the plastic parts of the car, it will not hurt the surface of the automobile, very sturdy and keep a long service life. Shock and torsion resistant after repair. The stainless steel clip will not rust. 5 different types of staples are included for different types of repairs. The kit includes 205 staples in total.
- 2s Quick Heating At the heart of this plastic welding gun is a 100-watt motor, which can quickly heat it in 1-2 seconds. It is more efficient than most 50w welding machines on the market. It can save you a lot of time and complete the repair project quickly.
- LED Work Light LED work light provides better visibility in darkened work conditions. The bright LED light can help in dark places like under the car.
- Friendly Accessories & After-sales Service It includes 1 x Plastic welding gun, 205 x Staples,1 x Solder horn,1 x Suitcase for you. If you just need to do a single, relatively small repair, this kit can do the job well.Additionally, we provide 24 7 friendly customer support to keep you away from after-sales worries.
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
See On Amazon #9
TMaster 18 Piece 1/4" (7/16-24 Inverted) Brake Line Fittings & brass Unions
Asin: B0B9KCZT5Q | Model: 900-005FT | PartNumber: 900-005FT | Ean: 0780854479237 | UPC: 780854479237
The Packaging Includes: 6 X Unions 12 X Nuts.
Thread Size: 7/16 Inch (For 1/4'' Tube).
1/4''(0.635 Cm) Tube Size, Suitable For 1/4''(0.635 Cm) Steel, Polyethylene Coated Or Copper Brake Wires..
Features
- for connecting 2 (1/4 inch) brake lines together
- 1/4''(0.635 cm) tube size, suitable for 1/4''(0.635 cm) steel, polyethylene coated or copper brake wires.
- The packaging includes: 6 x Unions 12 x nuts
- Thread size: 7/16 inch (for 1/4'' tube)
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.59 pounds
See On Amazon #10
TMaster 18 Piece 3/16" (3/8-24 Inverted) Brake Line Fittings & brass Unions
Asin: B0B9KC96PK | Model: 900-004FT | PartNumber: 900-004FT | Ean: 0780854479244 | UPC: 780854479244
The Packaging Includes: 6 X Unions 12 X Nuts.
Thread Size: 3/8-24 (For 3/16'' Tube).
Thread Size: 0.95 Cm (For 0.48 Cm Tube).
3/16''(0.48 Cm) Tube Size, Suitable For 3/16''(0.48 Cm) Steel, Polyethylene Coated Or Copper Brake Lines..
Features
- for connecting 2 (3/16 inch) brake lines together
- 3/16''(0.48 cm) tube size, suitable for 3/16''(0.48 cm) steel, polyethylene coated or copper brake lines.
- The packaging includes: 6 x Unions 12 x nuts
- Thread size: 0.95 cm (for 0.48 cm tube)
- Thread size: 3/8-24 (for 3/16'' tube)
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.59 pounds
See On Amazon #11
TMaster PV2 PROPORTIONING PROP VALVE DISC/DRUM PV-2
Asin: B0B9HKV6BS | Model: 900-009 | PartNumber: 900-009 | Ean: 0780854479282 | UPC: 780854479282
Built-In Low Pressure Switch.
Fits Most Oem Dual-Reservoir Type Master Cylinders.
Has Standard 9/16"-18 And 1/2"-20 Fittings.
Can Be Frame Or Firewall Mounted.
Works On Almost Any Chevy Or Ford Street Rod, Classic Truck, Or Muscle Car.
Features
- new proportioning valve For disc/drum applications
- Works on almost any Chevy or Ford street rod, classic truck, or muscle car
- Built-in low pressure switch
- Can be frame or firewall mounted
- Fits most OEM dual-reservoir type master cylinders
- Has standard 9/16-18 and 1/2-20 fittings
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Dimensions: 5.90 x 4.00 x 2.00 inches
See On Amazon #12
TMaster Adjustable Proportioning Valve for Universal Hot Rods 3/16 Brake 3/8-24 Fittings
Asin: B0B9HJR42X | Model: APV1 | PartNumber: APV1 | Ean: 0780854479275 | UPC: 780854479275
It Can Also Be Used In The Front Brake Lines To Reduce Pressure..
This Adjustment Lets You Fine Tune The Front To Rear Braking Balance By Proportionately Decreasing The Rear (Or In Some Cases The Front) Brake Line Pressure..
This Adjustment Lets You Fine Tune The Front To Rear Braking Balance By Proportionately Decreasing The Rear (Or In Some Cases The Front) Brake Line Pressure..
Pressure Adjustments Range 100-1000 Psi And Provide For A Maximum Decrease Of 57% In Line Pressure..
This Valve Is Typically Used To Decrease The Pressure To The Rear Brakes..
Features
- This valve is typically used to decrease the pressure to the rear brakes.
- This valve is typically used to decrease the pressure to the rear brakes.
- It can also be used in the front brake lines to reduce pressure.
- Pressure adjustments range 100-1000 PSI and provide for a maximum decrease of 57% in line pressure.
- This adjustment lets you fine tune the front to rear braking balance by proportionately decreasing the rear (or in some cases the front) brake line pressure.
- This adjustment lets you fine tune the front to rear braking balance by proportionately decreasing the rear (or in some cases the front) brake line pressure.
- See more on Amazon...
Brand: TMaster | Manufacturer: TMaster
Dimensions: 2.00 x 5.00 x 2.00 inches
See On Amazon #13
Prop Valve Kit for Disc/Drum with Mtg Bracket- Lines - bolts, included (PV2)
Asin: B0B95VW475 | Model: 900-001PV2 | PartNumber: 900-001PV2 | Ean: 0780854479305 | UPC: 780854479305
This Also Includes The Left Side Bracket Mounting Kit, Which Allows You To Mount This To The Left (Driver's Side) Of The Master Cylinder With Or Without Any Aftermarket Or Stock Booster Including 7" 8" 9" 10" And 11" Sizes..
As More Force Is Applied To The Brakes And The Car Begins To Lean Forward, Less Braking Force Is Needed In The Rear. This Valve Decreases The Pressure To The Rear, Preventing Lock Up..
Additionally, This Includes Two Hard Lines That Connect The Master Cylinder (With 1/2" & 9/16" Ports) To The Proportioning Valve. Fit For Gm Style Master Cylinder Only.
This Valve Is A Great Upgrade Over The Original And Is A Must When Upgrading From Drum To Disc Brakes. This Is A Universal Valve, And Will Work On Almost Any Chevy, Buick, Oldsmobile, Cadillac, Pontiac, Or Gm Trucks With A Gm Style Master Cylinder..
Features
- This valve has a system failure switch that will alert you when half of your braking system is not working properly.
- This valve is a great upgrade over the original and is a must when upgrading from drum to disc brakes. This is a universal valve, and will work on almost any Chevy, Buick, Oldsmobile, Cadillac, Pontiac, or GM Trucks with a GM style Master Cylinder.
- This also includes the left Side Bracket Mounting Kit, which allows you to mount this to the Left (Driver's Side) of the master cylinder with or without any aftermarket or Stock Booster including 7 8 9 10 and 11 sizes.
- Additionally, this includes two hard lines that connect the master cylinder (with 1/2 & 9/16 ports) to the proportioning valve. fit for GM style master cylinder only
- As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up.
- See more on Amazon...
Brand: TMaster | Manufacturer: YanYi
Dimensions: 2.00 x 2.00 x 2.00 inches
See On Amazon