TUTOOLS - Buying Guide
Last Updated: 05/03/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
TUTOOLS 800ML Headlight Restoration Liquid,Automobile Headlight Lens Polish Repair Liquid, Car Headlight Scratch Restoring Fluid for Repair Headlight Yellowing, Haze, Scratches
Asin: B0C892TNQX | Model: TUTOOLS | PartNumber: TUTOOLS
【Can Be Used For More Than 80 Headlights】800G Capacity, Simple Operation, High Transparency, Strong Adhesion, Etc., If Used Properly, Almost 80 Headlights Can Be Repaired..
【Notes】1. When Polishing, The First Step Is Very Important. After Polishing, There Are No Scratches, Trachoma And Cracks, And The Whole Bleaching Process Is Normal. 2. Sandpaper Shall Not Be Reused After Sanding. After Fumigation, The Surface Of The Projector Should Not Be Touched By Hard Objects Within 5 Hours, Otherwise There Will Be Scratches..
【Usage Methods】Use Water When Polishing. The Purpose Is To Prevent The Surface Of The Lamp From Being Too Hot And Invalidating The Sandpaper. When Polishing, It Is Necessary To Patiently Remove All Cracks, Scratches And Yellowing. After Completion, Wipe The Surface Of The Lamp With A Damp Cloth, Check Whether The Surface Of The Lamp Is Evenly Polished, And Treat The Stain With Clean Water Without Leaving Water..
【Warm Tips】Do Not Store The Product In The Sun. Please Wear A Mask During The Procedure. Pregnant Women, Children, And The Elderly Are Not Allowed To Touch!.
Features
- High Quality Material The solution of this repair tool adopts nano ultraviolet repair, which is environmentally friendly and does not contain heavy metals. It repairs car headlights as perfectly as new.
- Warm Tips Do not store the product in the sun. Please wear a mask during the procedure. Pregnant women, children, and the elderly are not allowed to touch!
- Can be used for more than 80 headlights 800g capacity, simple operation, high transparency, strong adhesion, etc., if used properly, almost 80 headlights can be repaired.
- Usage Methods Use water when polishing. The purpose is to prevent the surface of the lamp from being too hot and invalidating the sandpaper. When polishing, it is necessary to patiently remove all cracks, scratches and yellowing. After completion, wipe the surface of the lamp with a damp cloth, check whether the surface of the lamp is evenly polished, and treat the stain with clean water without leaving water.
- Notes 1. When polishing, the first step is very important. After polishing, there are no scratches, trachoma and cracks, and the whole bleaching process is normal. 2. Sandpaper shall not be reused after sanding. After fumigation, the surface of the projector should not be touched by hard objects within 5 hours, otherwise there will be scratches.
- See more on Amazon...
Brand: TUTOOLS | Manufacturer: TUTOOLS
Weight: 1.76 pounds
Warranty: 30 DAYS MONEY BACK WITHOUT ANY REASON
See On Amazon #2
Brake caliper press, TUTOOLS caliper piston spreader, brake tools,brake caliper piston, brake caliper press ratchet with 2 extra pcs Steel Plates, Red
Asin: B07XWFTQ2W | Ean: 0751474512154 | UPC: 751474512154
【Usage Methods】Make The Spreading Plates Both Sides Centralized Alignment The Pistons. Due To Ratcheting Structure, Two Spreading Plates Need Pressure To Start The Ratchet. Let Both Sides Of The Spreading Plates Be Forced At The Same Time, Please Squeeze Them For The First Few Swings Until The Suitable Position To` Insert Into The Caliper. Finally Adjust The Switch, Go Ahead To Swing. Please Make Sure To Spread The Force On The Caliper Piston Evenly, In Case Of Caliper Damage Or Pistons Dislocation..
【Excellent Service】We Tutools Team Provide 24 Months Customer Service And 30 Days Money Back For All Tutools Products ,If You Do Not Satisfied With Our Item, We Can Provide You Best Solutions To Satisfy You..
【Warm Tips】Without Pressure Pushing Inward On The Spreaders, You Will Not Be Able To Ratchet The Tool In Or Out. If The Tool Is Set Smaller Than The Space Between The Piston And Caliper Edge, You Will Need To Push Against The Spreader Until It Touches The Metal Of The Caliper..
【Premium Material】Tutools Car Ratchet Brake Piston Is Equip With Extra 2Pcs Steel Plates (4-5/8L X 2-3/8H)Perfect Fit For Single, Twin Or Quad Piston Calipers..
Features
- Wide application TUTOOLS brake caliper piston Saves time and much easier to use than most other ratchet caliper tool.Professional brake caliper piston press tool, ideal for most vehicles and trucks on the road.This tool is for brake tools and brake cylinder adjustment group,and you will need more than 1.5" of clearance between the caliper edge and the piston in order to fit this thing in there.In use, you can you can use a trustworthy C-clamp as an auxiliary tool.
- Premium material TUTOOLS car ratchet brake piston is equip with extra 2pcs steel plates (4-5/8L x 2-3/8H)perfect fit for Single, Twin or Quad Piston Calipers.
- Usage Methods Make the spreading plates both sides Centralized Alignment the pistons. Due to ratcheting structure, two spreading plates need pressure to start the ratchet. Let both sides of the spreading plates be forced at the same time, please squeeze them for the first few swings until the suitable position to` insert into the caliper. Finally adjust the switch, go ahead to swing. Please make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation.
- Warm Tips Without pressure pushing inward on the spreaders, you will not be able to ratchet the tool in or out. If the tool is set smaller than the space between the piston and caliper edge, you will need to push against the spreader until it touches the metal of the caliper.
- Excellent Service We TUTOOLS Team provide 24 months customer service and 30 days money back for all TUTOOLS products ,if you do not satisfied with our item, we can provide you best solutions to satisfy you.
- See more on Amazon...
Brand: TUTOOLS
See On Amazon #3
TUTOOLS 70W Hot Staplers Plastics Welding Machine Car tool PVC Welder Gun Soldering Iron For Plastic Auto Bumper Repair Kit for Workshop
Asin: B0BXWL68CF | Model: TUTOOLS-210FBA | PartNumber: TUTOOLS-210FBA
【4 Kinds Of Staples】This Welding Repair Tool Set Has A Maximum Power Of 70W, Which Can Help You Finish The Repair Of Plastic Parts Of Your Car Faster. The Welding Machine Kit Has 4 Kinds Of Staples. In Order To Meet Your Different Needs, The V-Shaped Staple Can Solve The Inner Corner Problem, The M-Shaped Staple Can Solve The Outer Corner Problem, And The Other Two Staples Can Solve The Plane Problem..
【Pls Note That】After Selecting The Staple You Want To Use And Inserting Into Gun, Place Staple On Plastic At The Pull The Trigger Until Staple Starts To Melt Into The Plastic And Lightly Wiggle It And Slightly Pull Up Causing A Little Plastic To Cover The Top Of The Staple And Stop Pulling And Don't Move Until You See The Golden Plastic Dry.
【Warm Tips】It Melt The Plastic Fast So Be Sure To Do It In A Very Well-Ventilated Area Or At Least A Windy Spot So You Do Not Breathe In The Fumes. Also Wear A Respirator Just In Case If Possible..
【70W Plastic Repair Welder Kit】This 70W Crack Repair Welding Machine Can Be Heated To 400°C/752°F In 3-4 Seconds. Compared With Other Low-Power Welding Machines, It Has More Power And Faster Heating Speed. Crack Repair And Welding Are Firm, And Plastic Parts That Are Easy To Weld Cracks And Damage Are Perfectly Reassembled. After Repairing, It Has Strong Seismic And Distortion Resistance..
Features
- Widely application TUTOOLS 70W Hot Staplers Plastics Welding Machine CAN Repair at least 98% of plastics on the market. Perfect for repair: bumper, dashboard, lamp holder, plastic ring, radiator, spoiler, handles, headlights, plastic wings, car and motorcycle plastic device, etc.
- 70W Plastic Repair Welder Kit This 70W crack repair welding machine can be heated to 400 C/752 F in 3-4 seconds. Compared with other low-power welding machines, it has more power and faster heating speed. Crack repair and welding are firm, and plastic parts that are easy to weld cracks and damage are perfectly reassembled. After repairing, it has strong seismic and distortion resistance.
- 4 kinds of staples This welding repair tool set has a maximum power of 70W, which can help you finish the repair of plastic parts of your car faster. The welding machine kit has 4 kinds of staples. In order to meet your different needs, the V-shaped staple can solve the inner corner problem, the M-shaped staple can solve the outer corner problem, and the other two staples can solve the plane problem.
- Warm tips It melt the plastic fast so be sure to do it in a very well-ventilated area or at least a windy spot so you do not breathe in the fumes. Also wear a respirator just in case if possible.
- Pls note that After selecting the staple you want to use and inserting into gun, place staple on plastic at the pull the trigger until staple starts to melt into the plastic and lightly wiggle it and slightly pull up causing a little plastic to cover the top of the staple and stop pulling and don't move until you see the golden plastic dry
- See more on Amazon...
Brand: TUTOOLS | Manufacturer: TUTOOLS
Warranty: 30 DAYS MONEY BACK WITHOUT ANY REASON
See On Amazon