Tabazy - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from Tabazy on Amazon
- CV Boot Clamp Kit - Stainless Steel Universal Adjustable Axle Boot CV Joint Bands Drive Axle Shaft J...
- Chain Breaker Riveting Tool for Motorcycle ATV Dirt Bike Scooter Bicycle Tractor Chain Break # 420, ...
- Oil Filter Housing Cap Assembly Compatible with Toyota-2009-2016 Corolla,2009-2014 Matrix, 2010-2016...
- Tabazy CV Joint Banding Boot Axle Clamp Tool with Universal Adjustable Drive Shaft CV Boot Band Clam...
- Primary Drive Clutch Puller Tool Replace 57001-1429, PP3079 Compatible with Kawasaki Brute Force 650...
- Riding Lawn Mower Tractor Starter Solenoid Compatible with Troy Bilt, John Deere, Zero-Turn, Toro, M...
- 2-Bolt 2.5inch Exhaust Flange Gasket 63.5mm for Turbo Manifold Header Down/Dump Pipe Flange, High Te...
- 2-Bolt 2.36inch 60mm Exhaust Flange Gasket for Turbo Manifold Header Down/Dump Pipe Flange, High Tem...
- Drive Shaft CV Boot Band Clamps - Axle Boot Clamps Universal Adjustable Stainless Steel CV Boot Clam...
- Pack of 4 18-0897 Exhaust Restricted Elbow Risers Gasket Compatible with Mercury Mercruiser V6 V8 En...
#1
CV Boot Clamp Kit - Stainless Steel Universal Adjustable Axle Boot CV Joint Bands Drive Axle Shaft Joint Crimp Clamps 24Pcs(12pcs Large+ 12pcs Small)
Asin: B09BJX2G1P | Model: T-16-y | PartNumber: T-16-y | Ean: 0769256679575 | UPC: 769256679575
Wide Application: Used On Drive & Cv Axle, Work Well With Your Cv Boot Kit Such As Atv's And Utv's Cv Boots. A Perfect Replacement For Your Loose Or Broken Cv Boot Clamp..
Package Included: 12Pcs Small Cv Boot Bands And 12Pcs Large Cv Boot Bands, Same As The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Simple To Use: Remove The Old Cv Boot Clamps, Clean Up The Grease, And Put The New Clamps On, And Then Just Lock And Fasten. You Can Install It In A Few Minutes..
Product Size: Small- Adjust Diameter From 0.78-1.96 Inch(20-50Mm), 0.275" (7Mm) In Width & 0.023" (0.6Mm) In Thickness, Large-Adjust Diameter From 1.96-4.72 Inch(50-120Mm), 0.354" (9Mm) In Width & 0.031" (0.8Mm) In Thickness..
Features
- MATERIAL: The cv joint clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.
- PRODUCT SIZE: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275 (7mm) in width & 0.023 (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354 (9mm) in width & 0.031 (0.8mm) in thickness.
- WIDE APPLICATION: Used on drive & CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. A perfect replacement for your loose or broken cv boot clamp.
- SIMPLE TO USE: Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten. You can install it in a few minutes.
- PACKAGE INCLUDED: 12pcs small cv boot bands and 12pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #2
Chain Breaker Riveting Tool for Motorcycle ATV Dirt Bike Scooter Bicycle Tractor Chain Break # 420, 428, 520, 525, 528, 530
Asin: B093L5JHCL | Ean: 0769256679513 | UPC: 769256679513
Replaceable Press Pin Is Heat Treated And Hardened, Please Be Sure To Verify That The Push Pin Is Aligned Properly With The Chain Pin..
Package Included: 1X Chain Breaker Shown On The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Highly Recommended To Grind Off The Chain Pin Head Before Using This Tool. This Will Significantly Reduce The Load On The Tool And Help Prevent Premature Wear Or Damage To The Breaking Tips..
Fits Chain Sizes 420, 428, 520, 525, 528, 530, Remove Chains And Extra Links With Ease And Adjust The Length Of A Roller Chain..
Features
- Material: Made of High-carbon steel , it has a much higher strength than normal steel, designed for better durability and reliability.
- Fits chain sizes 420, 428, 520, 525, 528, 530, remove chains and extra links with ease and adjust the length of a roller chain.
- Replaceable press pin is heat treated and hardened, please be sure to verify that the push pin is aligned properly with the chain pin.
- Highly recommended to grind off the chain pin head before using this tool. This will significantly reduce the load on the tool and help prevent premature wear or damage to the breaking tips.
- Package Included: 1x chain breaker shown on the pictures, We focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #3
Oil Filter Housing Cap Assembly Compatible with Toyota-2009-2016 Corolla,2009-2014 Matrix, 2010-2016 Prius, 2012-2016 Prius V and More, Replace 15620-37010 , 1562037010
Asin: B092H283BN | Model: 15620-37010 | PartNumber: 15620-37010 | Ean: 0769256679506 | UPC: 769256679506
When To Replace It: When The The Oil Filter Housing Is Impacted, Cracked Or Warped May Cause Engine Oil Leak, Therefore, It's Time To Replace The Oil Filter Housing..
1-Year Warranty: 1X Oil Filter Housing Cap Assembly As Pictures Shown, Direct Replacement For A Proper Fit And Easy Installation, Meets Or Exceeds Oem Standards..
Compatible Models: 2011-2016 Lexus Ct200h 1.8L, 2008-2014 Scion Xd 1.8L, 2016 Scion Im 1.8L, 2009-2016 Toyota Corolla 1.8L, 2009-2014 Toyota Matrix 1.8L, 2010-2016 Toyota Prius 1.8L, 2012-2016 Toyota Prius V 1.8L..
Premium Quality: Made Of High Quality Abs Plastic And Metal Materials, With Corrosion Resistance, Heat Resistance, Pressure Resistance, Abrasion Resistance For Long Service Life..
Features
- Replace Part Number: 15620-37010, 917-039, 90430-12031, 1562037010, 917039, 9043012031, 19185631, ENP4118 Oil Filter Housing Cap Assembly.
- Premium Quality: Made of high quality ABS plastic and metal materials, with corrosion resistance, heat resistance, pressure resistance, abrasion resistance for long service life.
- When to replace it: When the the oil filter housing is impacted, cracked or warped may cause engine oil leak, therefore, it's time to replace the oil filter housing.
- Compatible Models: 2011-2016 Lexus CT200h 1.8L, 2008-2014 Scion xD 1.8L, 2016 Scion iM 1.8L, 2009-2016 Toyota Corolla 1.8L, 2009-2014 Toyota Matrix 1.8L, 2010-2016 Toyota Prius 1.8L, 2012-2016 Toyota Prius V 1.8L.
- 1-Year Warranty: 1x Oil Filter Housing Cap Assembly as pictures shown, direct replacement for a proper fit and easy installation, meets or exceeds OEM standards.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #4
Tabazy CV Joint Banding Boot Axle Clamp Tool with Universal Adjustable Drive Shaft CV Boot Band Clamps, Automotive CV Boot Clamp Pliers Axle Boot Clamps 13Pcs for Most Cars
Asin: B0BYZ8W6J7 | Model: TBZ102-28 | PartNumber: TBZ102-28
With 12 Pcs Cv Joint Boot Clamps: Included 6Pcs Small Cv Joint Boot Band Clamps And 6Pcs Large Cv Joint Boot Band Clamps, The Axle Boot Clamps Is Made Of Stainless Steel Material, They Are Very Tough And Can Lock Items Very Firmly..
Fitment: Used On Drive & Cv Axle, Suitable For Mounting Cv Joint Boots, Axle Boot, Auto/Atv. Package Included: 6Pcs Small Clamps, 6Pcs Large Clamps, And 1 Pcs Cv Boot Clamp Banding Tool..
Clamps Size: Small- Adjust Diameter From 1.77-3.14 Inch(45-80Mm), 0.275" (7Mm) In Width & 0.01" (0.28Mm) In Thickness, Large-Adjust Diameter From 1.77-6.69 Inch(45-170Mm), 0.275" (7Mm) In Width & 0.01" (0.28Mm) In Thickness..
With 1 Pcs Cv Joint Clamp Banding Tool: Made Of High Quality Steel, Cv Joint Ear Clamp Banding Tool Contains A Built-In Cutter And Winding Mechanism, Which Can Quickly And Effectively Tighten And Cut The Strapping..
Features
- Features: The Axle Boot Clamps and CV joint clamp banding tool kit is a perfect combination for fast and simple tensioning and securing of CV boot banding strap. The clamps size can be freely adjusted. The locking teeth stop the tie at the desired length and get tighter with each pull. Using the CV Boot Joint Ear Clamp Banding Tool to cut off the excess.
- With 1 PCS CV Joint Clamp Banding Tool: Made of high quality steel, CV Joint Ear Clamp Banding Tool contains a built-in cutter and winding mechanism, which can quickly and effectively tighten and cut the strapping.
- With 12 PCS CV Joint Boot Clamps: Included 6pcs small CV joint boot band clamps and 6pcs large CV joint boot band clamps, the axle boot clamps is made of stainless steel material, they are very tough and can lock items very firmly.
- Clamps Size: Small- Adjust diameter from 1.77-3.14 inch(45-80mm), 0.275 (7mm) in width & 0.01 (0.28mm) in thickness, Large-Adjust diameter from 1.77-6.69 inch(45-170mm), 0.275 (7mm) in width & 0.01 (0.28mm) in thickness.
- Fitment: Used on drive & CV Axle, suitable for mounting CV joint boots, axle boot, Auto/ATV. Package included: 6pcs small clamps, 6pcs large clamps, and 1 pcs CV Boot Clamp Banding Tool.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
Warranty: Half year limited warranty
See On Amazon #5
Primary Drive Clutch Puller Tool Replace 57001-1429, PP3079 Compatible with Kawasaki Brute Force 650 750 KFX700 Mule 3000 Prairie 300 360 400 650 700
Asin: B08RZ87YB5 | Model: PP3079 | PartNumber: PP3079 | Ean: 0619191918263 | UPC: 619191918263
Fits: 2005-2006 Arctic Cat 650 4X4, 2004-2005 Suzuki Twin Peaks 700 Ltv700f 4X4, 2005-2012 Kawasaki Brute Force 650 Kvf650d 4X4, 2003-2009 Kawasaki Kfx700 Etc, More Details Please See Desription!.
Warranty: 1X Clutch Puller Comes With One Year Warranty. We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Note: Please Apply Some Lube Oil On The Clutch And Puller Tool Before Use It..
Reference Part Number: 57001-1429, 57001-1404, 238-5101, Pcp-10, Pp3079, K9215-11393..
Features
- Material: Machined from quality steel and heat treated for superior strength, used for removal of drive clutch.
- Reference Part Number: 57001-1429, 57001-1404, 238-5101, PCP-10, PP3079, K9215-11393.
- Fits: 2005-2006 Arctic Cat 650 4x4, 2004-2005 Suzuki Twin Peaks 700 LTV700F 4x4, 2005-2012 Kawasaki Brute Force 650 KVF650D 4x4, 2003-2009 Kawasaki KFX700 etc, more details please see desription!
- Note: Please apply some lube oil on the clutch and puller tool before use it.
- Warranty: 1x clutch puller comes with one year warranty. We focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #6
Riding Lawn Mower Tractor Starter Solenoid Compatible with Troy Bilt, John Deere, Zero-Turn, Toro, MTD Mower Tractors
Asin: B0B4WQ8GJJ | Ean: 0604787194275 | UPC: 604787194275
Tips: This Starter Solenoid Does Not Ground Through The Body / Mounting Bracket But Rather Through One Of The Smaller Terminals.It Can Be Used On Lawnmowers Equipped With 3 Terminals Or 4-Terminals Solenoids. If Your Application Only Uses 3 Terminals, You Must Ground One Of The 2 Smaller Terminals On This Solenoid For It To Work, Doesn't Matter Which Of The 2. Terminal Nuts And Washer Included..
Package Included: 1Pcs Starter Solenoid, Same As The Pictures, If There Are Any Problem, Please Feel Free To Contact Us, We Are Always Stand By Your Side To Solve The Problem..
Widely Application: Universal Replacement Starter Solenoid, This Lawn Mower Solenoid Fit For Most Lawn Garden Tractors..
Special Design: Equipped With Copper Gasket, Allows Copper Studs To Accept Both 1/4" And 5/16" Terminal Ends..
Features
- Spec: Zinc plated, 12V, Copper Studs: 1/4"-20, 4-Terminal, made of sturdy, high temperature resistant plastic housing, provide long durability and reliability.
- Special Design: Equipped with copper gasket, allows copper studs to accept both 1/4 and 5/16 terminal ends.
- Tips: This starter solenoid does not ground through the body / mounting bracket but rather through one of the smaller terminals.It can be used on lawnmowers equipped with 3 terminals or 4-terminals solenoids. If your application only uses 3 terminals, you must ground one of the 2 smaller terminals on this solenoid for it to work, doesn't matter which of the 2. Terminal nuts and washer included.
- Widely Application: Universal replacement starter solenoid, this lawn mower solenoid fit for most lawn garden tractors.
- Package Included: 1pcs Starter solenoid, same as the pictures, if there are any problem, please feel free to contact us, we are always stand by your side to solve the problem.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #7
2-Bolt 2.5inch Exhaust Flange Gasket 63.5mm for Turbo Manifold Header Down/Dump Pipe Flange, High Temperature Exhaust Gasket 5 PCS
Asin: B0C6Q2Z96R | Model: TBZ 110-4 | PartNumber: TBZ 110-4
Hole Size: 2.5 Inch (63.5Mm), Suitable For Turbo, Manifold, Header, Down/Dump Pipe Flange..
Package Included: 5Pcs High Temp Exhaust Gasket, Bolt Reliefs Are Lengthened For Flexibility Of Bolt/Stud Position..
Size: Center To Center Is 3.82”. Inside To Inside Is 3”, Outside To Outside Is 4.64”..
Sturdy And Directly Replaceable, Provide Long Service Life..
Features
- Made of high quality material, Reliable Sealing, High / Low Temperature Resistant.
- Sturdy and directly replaceable, provide long service life.
- Hole size: 2.5 Inch (63.5mm), suitable for turbo, manifold, Header, down/dump pipe flange.
- Size: Center to center is 3.82 . Inside to inside is 3 , outside to outside is 4.64 .
- Package Included: 5pcs high temp exhaust gasket, Bolt reliefs are lengthened for flexibility of bolt/stud position.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
Warranty: Half a year manufacturer
See On Amazon #8
2-Bolt 2.36inch 60mm Exhaust Flange Gasket for Turbo Manifold Header Down/Dump Pipe Flange, High Temperature Exhaust Gasket 5 PCS
Asin: B0B714983K | Model: 110-3 | PartNumber: 110-3 | Ean: 0604787194299 | UPC: 604787194299
Hole Size: 2.36 Inch (60Mm), Suitable For Turbo, Manifold, Header, Down/Dump Pipe Flange..
Package Included: 5Pcs High Temp Exhaust Gasket, Bolt Reliefs Are Lengthened For Flexibility Of Bolt/Stud Position..
Brand New Aftermarket Exhaust Flange Gasket..
Sturdy And Directly Replaceable, Provide Long Service Life..
Features
- High quality material, Reliable Sealing, High & Low Temperature Resistant.
- Sturdy and directly replaceable, provide long service life.
- Hole size: 2.36 Inch (60mm), suitable for turbo, manifold, Header, down/dump pipe flange.
- Brand new aftermarket exhaust flange gasket.
- Package Included: 5pcs high temp exhaust gasket, Bolt reliefs are lengthened for flexibility of bolt/stud position.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
Warranty: 1 year manufacturer
See On Amazon #9
Drive Shaft CV Boot Band Clamps - Axle Boot Clamps Universal Adjustable Stainless Steel CV Boot Clamp for CV Boots & Joints 24Pcs(12pcs Large+ 12pcs Small)
Asin: B0BYZ42NRY | Model: TBZ102-27 | PartNumber: TBZ102-27
Product Size: Small- Adjust Diameter From 1.77-3.14 Inch(45-80Mm), 0.275" (7Mm) In Width & 0.01" (0.28Mm) In Thickness, Large-Adjust Diameter From 1.77-6.69 Inch(45-170Mm), 0.275" (7Mm) In Width & 0.01" (0.28Mm) In Thickness..
Package Included: 12Pcs Small Cv Joint Boot Band Clamps And 12Pcs Large Cv Joint Boot Band Clamps, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Easy To Use: The Size Can Be Freely Adjusted. The Locking Teeth Stop The Tie At The Desired Length And Get Tighter With Each Pull. If You Need To Cut Off The Excess, You Must Use The Cv Boot Joint Ear Clamp Banding Tool To Do That. Note: Cv Joint Boot Band Tool Are Not Included With This Item..
Wide Application: Used On Drive & Cv Axle, Work Well With Your Cv Boot Kit Such As Atv's And Utv's Cv Boots. Non-Porous And Double Buckle Design To Prevent Loosening Or Breakage During Using..
Features
- MATERIAL: The axle boot clamps is made of stainless steel material, they are very tough and can lock items very firmly.
- WIDE APPLICATION: Used on drive & CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. Non-porous and double buckle design to prevent loosening or breakage during using.
- PRODUCT SIZE: Small- Adjust diameter from 1.77-3.14 inch(45-80mm), 0.275 (7mm) in width & 0.01 (0.28mm) in thickness, Large-Adjust diameter from 1.77-6.69 inch(45-170mm), 0.275 (7mm) in width & 0.01 (0.28mm) in thickness.
- EASY TO USE: The size can be freely adjusted. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you must use the CV Boot Joint Ear Clamp Banding Tool to do that. Note: CV Joint Boot Band Tool are not included with this item.
- PACKAGE INCLUDED: 12pcs small CV joint boot band clamps and 12pcs large CV joint boot band clamps, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
Warranty: Half year limited warranty
See On Amazon #10
Pack of 4 18-0897 Exhaust Restricted Elbow Risers Gasket Compatible with Mercury Mercruiser V6 V8 Engines Replace 27-41813, 27-860233, 27-863724
Asin: B09BJYFTPB | Ean: 0769256679612 | UPC: 769256679612
Fitment: Fit For Mercruiser V6 And V8 Engines From 1983 To 2002. Please Check The Description To Confirm The Compatibility..
Package Included: 4X Exhaust Manifold Gasket, Same As The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
High Quality: Aftermarket 18-0897 Marine Exhaust Elbow Gasket, High Quality Gasket..
Features: Restrictor Style Gasket For Standard Cooling (Allows Raw Water Flow)..
Features
- Replace Part Number: 18-0897, Barr MC47-27-41813, Barr MC 47 27 87105, GLM 30240, GLM 32080, Mallory 9-61413, Mallory 9-61414, Mercruiser 27-41813, 27-860233, 27-863724, Mercurieser Stern Drive 27-863726, 27-860232, 27-818832, 27-871051, 27-87105, Osco 8503-GR, Osco 8503-GO.
- Features: Restrictor style gasket for standard cooling (allows raw water flow).
- Fitment: Fit for Mercruiser V6 and V8 engines from 1983 to 2002. Please check the description to confirm the compatibility.
- High Quality: Aftermarket 18-0897 marine exhaust elbow gasket, high quality gasket.
- Package Included: 4x Exhaust Manifold Gasket, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #11
Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV
Asin: B09NDD3TNQ | Ean: 0769256679650 | UPC: 769256679650
Material: The Cv Boot Clamp Tool Is Made Of High Quality 304 Stainless Steel That Are More Salt Resistant, Anti-Rust, Anti-Corrosion Than Other 201 Stainless Steel, Loose Or Damaged Clamp Can Be Harmful To Your Automobile And Create Grease Spills, The New Clamps Can Help You Reseal And Fastened To Prevent Leakage..
What You'll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small Cv Boot Clamps, 6Pcs Large Cv Boot Clamps Are Included In This Kit, Same As The Pictures, This Kit Tool Can Meet Your Daily Need..
Function And Use: These Clamps Are Locking Secure And Tight On Drive & Cv Axle. They Are Good For You To Replace The Car Broken Drive Shaft Cv Boot Clamp..
Clamp Size Are Adjustable: Small- Adjust Diameter From 0.78-1.96 Inch(20-50Mm), 0.275" (7Mm) In Width & 0.023" (0.6Mm) In Thickness, Large-Adjust Diameter From 1.96-4.72 Inch(50-120Mm), 0.354" (9Mm) In Width & 0.031" (0.8Mm) In Thickness..
Features
- Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps.
- Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275 (7mm) in width & 0.023 (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354 (9mm) in width & 0.031 (0.8mm) in thickness.
- Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage.
- Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp.
- What You'll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV Boot Clamps, 6Pcs Large CV Boot Clamps are included in this kit, same as the pictures, this kit tool can meet your daily need.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #12
Swingarm Pivot Nut Tool Replaces PP2850, 09940-14940 Compatible with Suzuki GSXR1000, SV650, GSXR750 and More
Asin: B08RZB1JJZ | Model: PP2850 | PartNumber: PP2850 | Ean: 0619191918270 | UPC: 619191918270
Size: 1/2 Inch Drive, Inside Diameter: 30Mm, Outside Diameter: 43Mm, Tooth Height: 8Mm..
Warranty: 1X Swingarm Pivot Nut Tool Comes With One Year Warranty. We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Replaces Part #: Pp2850, 09940-14940, 0994014940..
Function: Used For Removing & Replacing Lock Nut On Swing Arm Pivot Shafts And Other Service Jobs On Many Motorcycles..
Features
- Material: Machined from quality steel and heat treated for superior strength.
- Function: Used for removing & replacing lock nut on swing arm pivot shafts and other service jobs on many motorcycles.
- Size: 1/2 inch drive, Inside diameter: 30mm, Outside diameter: 43mm, Tooth Height: 8mm.
- Replaces Part #: PP2850, 09940-14940, 0994014940.
- Warranty: 1x Swingarm Pivot Nut Tool comes with one year warranty. We focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #13
CV Joint Axle Boot Clamp Pliers with 20pcs Stainless Steel Universal Adjustable Axle Boot CV Joint Bands Drive Axle Shaft Joint Crimp Clamps Fit for Most Cars
Asin: B0BJ88YP24 | Model: TBZ102-25 | PartNumber: TBZ102-25 | Ean: 0604787194336 | UPC: 604787194336
The Size Of Crimp Bands: Small- Adjust Diameter From 0.78-1.96 Inch(20-50Mm), 0.275" (7Mm) In Width & 0.023" (0.6Mm) In Thickness, Large-Adjust Diameter From 1.96-4.72 Inch(50-120Mm), 0.354" (9Mm) In Width & 0.031" (0.8Mm) In Thickness..
What You'll Get: 1X Pliers Tool And 20Pcs Clamps(10Pcs Small Cv Boot Bands And 10Pcs Large Cv Boot Bands), Same As The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Easy Installation: The Plier Is A Good Ideal For Installing Clamps On Fuel, Cooling Systems And Vacuum Hoses. Just Crimp The Clamp And Then Push Down On The Crimp To Lock Into Place..
Non-Slip Handle: The Pliers Handle Adopts Non-Slip Design, It Is More Powerful To Hold And It Is More Comfortable To Use..
Features
- MATERIAL: The head of the pliers adopts quenching process, which has better hardness and long service life. The CV boot clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.
- NON-SLIP HANDLE: The pliers handle adopts non-slip design, it is more powerful to hold and it is more comfortable to use.
- THE SIZE OF CRIMP BANDS: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275 (7mm) in width & 0.023 (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354 (9mm) in width & 0.031 (0.8mm) in thickness.
- EASY INSTALLATION: The Plier is a good ideal for installing clamps on fuel, cooling systems and vacuum hoses. Just crimp the clamp and then push down on the crimp to lock into place.
- WHAT YOU'LL GET: 1x Pliers Tool and 20pcs Clamps(10pcs small cv boot bands and 10pcs large cv boot bands), same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #14
CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Hose Axle Plier CV Clamp Tool for Auto ATV UTV
Asin: B09NDFL6V6 | Ean: 0769256679667 | UPC: 769256679667
Material Of Ear Clamp: The Cv Boot Clamp Tool Is Made Of High Quality 304 Stainless Steel That Are More Salt Resistant, Anti-Rust, Anti-Corrosion Than Other 201 Stainless Steel, Loose Or Damaged Clamp Can Be Harmful To Your Automobile And Create Grease Spills, The New Clamps Can Help You Reseal And Fastened To Prevent Leakage..
Package Included: 1Pcs Ear Clamps Pliers, 1Pcs Cv Joint Banding Tool With Cutter, 4Pcs Small Cv Boot Clamps, 4Pcs Large Cv Boot Clamps Are Included In This Kit, Same As The Pictures..
Ear Clamp Size Are Adjustable: Small- Adjust Diameter From 0.78-1.96 Inch(20-50Mm), 0.275" (7Mm) In Width & 0.023" (0.6Mm) In Thickness, Large-Adjust Diameter From 1.96-4.72 Inch(50-120Mm), 0.354" (9Mm) In Width & 0.031" (0.8Mm) In Thickness..
Cv Joint Clamp Banding Tool: Made Of High Quality Steel, Use With Banding Straps Up To 10Mm (0.39In) Wide, 0.6Mm(0.02In) Thick, With A Built In Cutter And Winding Mechanism The Banding Can Be Tightened And Cut Quickly And Effectively. (Note: The Banding Straps Are Not Included, Only Ear Crimp Clamps Shown In The Picture Are Included. ).
Features
- Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps.
- CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. )
- Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage.
- Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275 (7mm) in width & 0.023 (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354 (9mm) in width & 0.031 (0.8mm) in thickness.
- Package Included: 1Pcs Ear Clamps Pliers, 1Pcs CV Joint Banding Tool with Cutter, 4Pcs Small CV Boot Clamps, 4Pcs Large CV Boot Clamps are included in this kit, same as the pictures.
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #15
Ear Clamp Pliers, Pincer Crimper Tool, Single Ear Hose Clamps Pliers for Auto ATV UTV, Nail Puller for Securing Pipe Hoses, Front Jaw
Asin: B09XK4KMXV | Model: 102-24 | PartNumber: 102-24 | Ean: 0604787194213 | UPC: 604787194213
Unique Design: The Thin Head Design Permits Good Accessibility In Confined Areas And Will Not Damage The Press Points On The Ear Clamps..
What You'll Get: 1Pcs Ear Clamps Pliers Is Included In This Package, Same As The Pictures, If You Have Any Problem, Just Feel Free To Contact Us!.
Easy To Use: Clamps Can Be Installed Quickly By Using This Pliers, It's Designed For Ear Clamps. Not Intended For Clic-R Clamps..
Widely Application: Widely Applied To Install And Remove Single Ear Hose Clamps, Double Ear Clamps. Ideal For Installing Band Style Boot Clamps On Fuel Filter, Water Pumps, Cv Joint Boots, Atv Axle Boot, Steering Racks, Drive Shafts And Other Cooling System Hoses..
Features
- MATERIAL: Ear hose clamps pincers are made of high-strength chrome-vanadium steel for durability and long-lasting, equipped with non-slip grip handles which is convenient for your installation.
- WIDELY APPLICATION: Widely applied to install and remove single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses.
- UNIQUE DESIGN: The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps.
- EASY TO USE: Clamps can be installed quickly by using this pliers, it's designed for ear clamps. Not intended for Clic-R clamps.
- WHAT YOU'LL GET: 1Pcs Ear Clamps Pliers is included in this package, same as the pictures, if you have any problem, just feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #16
CV Boot Clamp Pliers CV Joint Ear Clamp Banding Tool Set with 12pcs Adjustable Axle Boot CV Joint Bands Drive Axle Shaft Joint Crimp Clamps Fit for Most Cars
Asin: B09BJYXQJ3 | Model: SJTG-SJT-BR#-TOOLPC-210722-B09BJYXQJ3 | PartNumber: SJTG-SJT-BR#-TOOLPC-210722-B09BJYXQJ3 | Ean: 0769256679599 | UPC: 769256679599
Crafts: The Head Of The Pliers Adopts Quenching Process, Which Has Better Hardness And Long Service Life. The Pliers Handle Adopts Non-Slip Design, It Is More Powerful To Hold..
What You'll Get: 1X Cv Joint Ear Clamp Banding Tool, 1X Cv Boot Clamp Pliers, 12Pcs Clamps (6Pcs Small Cv Boot Bands And 6Pcs Large Cv Boot Bands), Same As The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Clamps Size: Small- Adjust Diameter From 0.78-1.96 Inch(20-50Mm), 0.275" (7Mm) In Width & 0.023" (0.6Mm) In Thickness, Large-Adjust Diameter From 1.96-4.72 Inch(50-120Mm), 0.354" (9Mm) In Width & 0.031" (0.8Mm) In Thickness..
Application: The Cv Joint Clamp Banding Tool And Cv Boot Clamp Pliers Is Suitable For Ear-Type Hose Clamps On Fuel, Cooling Systems And Vacuum Hoses, And Can Be Used For Any Strapping With A Width Of Not More Than 10Mm..
Features
- FEATURES: The CV Joint Boot Clamps Pliers Car Banding Tools Kit is a perfect combination pliers for fast and simple tensioning and securing of CV boot banding strap, including a built-in cutter and winding mechanism, which can quickly and effectively tighten and cut the strapping.
- APPLICATION: The CV joint clamp banding tool and CV boot clamp pliers is suitable for ear-type hose clamps on fuel, cooling systems and vacuum hoses, and can be used for any strapping with a width of not more than 10mm.
- CRAFTS: The head of the pliers adopts quenching process, which has better hardness and long service life. The pliers handle adopts non-slip design, it is more powerful to hold.
- CLAMPS SIZE: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275 (7mm) in width & 0.023 (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354 (9mm) in width & 0.031 (0.8mm) in thickness.
- WHAT YOU'LL GET: 1x CV Joint Ear Clamp Banding Tool, 1x CV Boot Clamp Pliers, 12pcs Clamps (6pcs small cv boot bands and 6pcs large cv boot bands), same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #17
Exhaust Elbow Gasket Compatible with Mercruiser Stern Drive Replace 18-2849-1 27-863726 27-818832 27-860232, 4 Pcs
Asin: B09YTGWBQP | Ean: 0604787194220 | UPC: 604787194220
Fitment: For Use On Mercruiser 1998-2001 Gm V-6 & V-8 With Center Rise Outlet Exhaust Manifolds..
Package Included: 4 X Exhaust Elbow Gasket, Same As The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Function: Made Of High Quality Material, Provide An Air-Tight Seal.The Gasket Can Effectively Protect The Exhaust Pipe And Prolong Its Service Life..
Replace Part Number: 18-2849-1, 18-2849, Mercruiser Stern Drive 27-863726, 27-860232, 27-818832, 27-871051, 27-87105, Mallory 9-61414, Glm 32080, Osco 8503-Go, Barr Mc 47 27 87105..
Features
- Features: Standard cooling, full flow 4 slot gasket.
- Replace Part Number: 18-2849-1, 18-2849, Mercruiser Stern Drive 27-863726, 27-860232, 27-818832, 27-871051, 27-87105, Mallory 9-61414, GLM 32080, Osco 8503-GO, Barr MC 47 27 87105.
- Fitment: For use on Mercruiser 1998-2001 GM V-6 & V-8 with center rise outlet exhaust manifolds.
- Function: Made of high quality material, provide an air-tight seal.The gasket can effectively protect the exhaust pipe and prolong its service life.
- Package Included: 4 x Exhaust Elbow Gasket, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #18
CV Boot Clamp Kit 100Pcs- Stainless Steel Universal Adjustable Axle Boot CV Joint Bands Drive Axle Shaft Joint Crimp Clamps (50pcs Large+ 50pcs Small)
Asin: B0BJ8CX45F | Model: TBZ102-26 | PartNumber: TBZ102-26 | Ean: 0604787194343 | UPC: 604787194343
Wide Application: Used On Drive & Cv Axle, Work Well With Your Cv Boot Kit Such As Atv's And Utv's Cv Boots. A Perfect Replacement For Your Loose Or Broken Cv Boot Clamp..
Package Included: 50Pcs Small Cv Boot Bands And 50Pcs Large Cv Boot Bands, Same As The Pictures, We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Simple To Use: Remove The Old Cv Boot Clamps, Clean Up The Grease, And Put The New Clamps On, And Then Just Lock And Fasten. You Can Install It In A Few Minutes..
Product Size: Small- Adjust Diameter From 0.78-1.96 Inch(20-50Mm), 0.275" (7Mm) In Width & 0.023" (0.6Mm) In Thickness, Large-Adjust Diameter From 1.96-4.72 Inch(50-120Mm), 0.354" (9Mm) In Width & 0.031" (0.8Mm) In Thickness..
Features
- MATERIAL: The cv joint clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.
- PRODUCT SIZE: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275 (7mm) in width & 0.023 (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354 (9mm) in width & 0.031 (0.8mm) in thickness.
- WIDE APPLICATION: Used on drive & CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. A perfect replacement for your loose or broken cv boot clamp.
- SIMPLE TO USE: Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten. You can install it in a few minutes.
- PACKAGE INCLUDED: 50pcs small cv boot bands and 50pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
Warranty: 1 Year manufacturer
See On Amazon #19
Tabazy Flywheel Rotor Magneto Puller Tool 33mmx1.5 RH Female Replace 08-0390
Asin: B08Y8BGM7S | Ean: 0619191918386 | UPC: 619191918386
Surface: The Surface Is Covered With A Sturdy Black Oxide Coating..
Warranty: 1X Flywheel Rotor Magneto Puller Tool Comes With One Year Warranty. We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Reference Part Number: Pp2731, 08-0390, Please Check The Thread Size And Replace Part Number To Confirm Compatibility..
Features: 33Mmx1.5 Right-Hand Thread Female Magneto Puller..
Features
- Material: Machined from quality steel and heat treated for superior strength and durability.
- Features: 33mmx1.5 right-hand thread female magneto puller.
- Surface: The surface is covered with a sturdy black oxide coating.
- Reference Part Number: PP2731, 08-0390, please check the thread size and replace part number to confirm compatibility.
- Warranty: 1x Flywheel Rotor Magneto Puller Tool comes with one year warranty. We focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon #20
Primary Drive Clutch Puller Remover Tool Replaces 90890-01876-00 Compatible with Yamaha G1A, G1E, G11A, G14A, G14E, G16E, G21A, G22A and More
Asin: B08RZ93Y8R | Model: 90890-01876-00 | PartNumber: 90890-01876-00 | Ean: 0619191918294 | UPC: 619191918294
Fits: 1979-1986, 1989 Yamaha G1a, 1980-1986 Yamaha G1e, 1993-1994, 1996-2001 Yamaha G11a, 1995-1996 Yamaha G14a, More Details Please See Desription!.
Warranty: 1X Clutch Puller Comes With One Year Warranty. We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers, If You Have Any Problems, Please Feel Free To Contact Us!.
Note: Please Apply Some Lube Oil On The Clutch And Puller Tool Before Use It..
Replaces Part #: 90890-01876-00, Easy To Pull The Clutch On Your Golf Cart..
Features
- Material: Machined from quality steel and heat treated for superior strength, used for removal of drive clutch.
- Replaces Part #: 90890-01876-00, easy to pull the clutch on your golf cart.
- Fits: 1979-1986, 1989 Yamaha G1A, 1980-1986 Yamaha G1E, 1993-1994, 1996-2001 Yamaha G11A, 1995-1996 Yamaha G14A, more details please see desription!
- Note: Please apply some lube oil on the clutch and puller tool before use it.
- Warranty: 1x Clutch Puller comes with one year warranty. We focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!
- See more on Amazon...
Brand: Tabazy | Manufacturer: Tabazy
See On Amazon