Tapmatic - Buying Guide
Last Updated: 05/01/2024
Share on
Bestselling from Tapmatic on Amazon
- Tapmatic - 25037 1/2" Straight Shank Arbor with Threaded Mount, 3/8"-24 Thread
- Tapmatic Quill Mount Torque Bar, 1-1/2"-2-3/8" Diameter, 1/2" and M16 Tap Capacity
- Tapmatic 22200 Standard Rubber Flex Collet, 6.5mm - 10mm Capacity
- Tapmatic - 15033 RX 50 Self-Reversing Tapping Head, #33JT Taper Mount, #6 - 1/2" and M3-M12 Capacity
- Tapmatic - 25033 1/2" Straight Shank Arbor to 33 Jacobs Taper
- Tapmatic RX 70 Self-Reversing Tapping Head, #3JT Taper Mount, #10 - 3/4" and M5-M18 Capacity
- Tapmatic RX 30 Self-Reversing Tapping Head, 3/8"-24 Thread Mount, #0 - 1/4" and M1.4-M7 Capacity
- Collet, Rubber Flex, 0.280 - 0.500
- Collet, Rubber Flex, 0.253-0.383
- Tapmatic 9 Tension/11 Compression Tap Chuck with Modular Straight Shank and RF Collet, M5-M18 and #1...
- Tapmatic BT50 Arbor with 1" Bore Diameter
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Tapmatic - 25037 1/2" Straight Shank Arbor with Threaded Mount, 3/8"-24 Thread
Asin: B007RGY5FG | Model: 25037 | PartNumber: 25037
3/8"-24 Thread.
Pack Of 1.
1/2" Shank Diameter.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Dimensions: 3.75 x 8.50 x 4.00 inches
See On Amazon #2
Tapmatic Quill Mount Torque Bar, 1-1/2"-2-3/8" Diameter, 1/2" and M16 Tap Capacity
Asin: B007RGY0SS | Model: 29099 | PartNumber: 29099
The Stop Arm Should Not Be Installed Permanently, Not Under Any Circumstances Be Held By Hand Or Fastened With Wire.
The Torque Bar Installation Must Be Stronger Than The Largest Tap In The Capacity Range Of Your Tapping Attachment.
The Torque Bar Must Be Mounted Securely To The Quill Of Your Machine.
Always Mount A Torque Bar To Hold The Tapping Attachment's Stop Arm From Rotating.
Features
- Clamp around quill of machine
- Always mount a torque bar to hold the tapping attachment's stop arm from rotating
- The stop arm should not be installed permanently, not under any circumstances be held by hand or fastened with wire
- The torque bar must be mounted securely to the quill of your machine
- The torque bar installation must be stronger than the largest tap in the capacity range of your tapping attachment
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Dimensions: 2.80 x 8.60 x 2.70 inches | Weight: 1.25 Pounds
See On Amazon #3
Tapmatic 22200 Standard Rubber Flex Collet, 6.5mm - 10mm Capacity
Asin: B007RGYPMY | Model: 22200 | PartNumber: 22200
6.5Mm - 10Mm Capacity.
Pack Of 1.
Rubber Flex Collets For Tapmatic Spd-5 Tapping Attachments, Rx 50/50X Tapping Head And Nsm4/Tf1 Chucks.
Features
- Rubber flex multi range collet
- Rubber Flex collets for TAPMATIC SPD-5 tapping attachments, RX 50/50X tapping head and NSM4/TF1 chucks
- 6.5mm - 10mm Capacity
- Pack of 1
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Dimensions: 0.50 x 0.80 x 0.80 inches | Weight: 0.05 Pounds
See On Amazon #4
Tapmatic - 15033 RX 50 Self-Reversing Tapping Head, #33JT Taper Mount, #6 - 1/2" and M3-M12 Capacity
Asin: B007RGYULA | Model: 015033 | PartNumber: 015033
Reduced Cycle Time Through Increased 1.75 :1 Reverse Speed.
Easy Adaptation With Multiple Interchangeable Arbors.
Easy Handling, Compact Design.
Less Tap Breakage Due To Pre-Selective Torque Control.
Features
- For hard to machine material and high torque applications like roll form tapping
- Less tap breakage due to pre-selective torque control
- Reduced cycle time through increased 1.75 :1 reverse speed
- Easy handling, compact design
- Easy adaptation with multiple interchangeable arbors
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Weight: 5.00 Pounds
See On Amazon #5
Tapmatic - 25033 1/2" Straight Shank Arbor to 33 Jacobs Taper
Asin: B007RGY4WA | Model: 25033 | PartNumber: 25033 | Ean: 7803175857256
33 Jacobs Taper.
Pack Of 1.
1/2" Shank Diameter.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Dimensions: 0.70 x 5.30 x 0.70 inches
See On Amazon #6
Tapmatic RX 70 Self-Reversing Tapping Head, #3JT Taper Mount, #10 - 3/4" and M5-M18 Capacity
Asin: B007RGYVYG | Model: 017003 | PartNumber: 017003
Reduced Cycle Time Through Increased 1.75 :1 Reverse Speed.
Easy Adaptation With Multiple Interchangeable Arbors.
Easy Handling, Compact Design.
Less Tap Breakage Due To Pre-Selective Torque Control.
Features
- For hard to machine material and high torque applications like roll form tapping
- Less tap breakage due to pre-selective torque control
- Reduced cycle time through increased 1.75 :1 reverse speed
- Easy handling, compact design
- Easy adaptation with multiple interchangeable arbors
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon #7
Tapmatic RX 30 Self-Reversing Tapping Head, 3/8"-24 Thread Mount, #0 - 1/4" and M1.4-M7 Capacity
Asin: B007RGYT0W | Model: 013037 | PartNumber: 013037
Reduced Cycle Time Through Increased 1.75 :1 Reverse Speed.
Easy Adaptation With Multiple Interchangeable Arbors.
Easy Handling, Compact Design.
Less Tap Breakage Due To Pre-Selective Torque Control.
Features
- For hard to machine material and high torque applications like roll form tapping
- Less tap breakage due to pre-selective torque control
- Reduced cycle time through increased 1.75 :1 reverse speed
- Easy handling, compact design
- Easy adaptation with multiple interchangeable arbors
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon #8
Collet, Rubber Flex, 0.253-0.383
Asin: B00209LUYE | Ean: 7430988702727
Manufacturer: Tapmatic.
Country Of Manufacture: Germany.
Features
- Knobs, Handles, Work holding & Machine Tool Accessories
- Country of manufacture: Germany
- Manufacturer: TAPMATIC
- See more on Amazon...
Brand: Tapmatic | Manufacturer: TAPMATIC
Weight: 1.98 Pounds
See On Amazon #9
Tapmatic 9 Tension/11 Compression Tap Chuck with Modular Straight Shank and RF Collet, M5-M18 and #10 - 3/4" Capacity, 1" Shank
Asin: B007RGYNGM | Model: 35886 | PartNumber: 35886
Releasable Hard Start For Consistent Depth Control.
Multi-Range Collets (Rf), Adjustable Back Jaw For Driving Tap Square.
Right Hand And Left Hand Tapping.
Increased Tension And Compression.
Features
- Tapping chuck with increased tension and compression to accommodate tapping cycles that are not synchronized
- Increased tension and compression
- Releasable hard start for consistent depth control
- Right hand and left hand tapping
- Multi-range collets (RF), adjustable back jaw for driving tap square
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $512.40 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #10
Tapmatic BT50 Arbor with 1" Bore Diameter
Asin: B007RGYLX2 | Model: 23955 | PartNumber: 23955
Pack Of 1.
Country Of Origin: India.
1" Bore Diameter.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Weight: 0.00 Pounds
See On Amazon #11
Tapmatic BT40 Arbor with 1" Bore Diameter, 27 mm Length
Asin: B007RGYL2S | Model: 23952 | PartNumber: 23952
Pack Of 1.
Country Of Origin: India.
1" Bore Diameter.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Weight: 0.00 Pounds
See On Amazon #12
Tapmatic ER25 Steel Drive Collet, 5/16" Shank, 7/16" Tap Size, 31/32" Head Diameter
Asin: B007RGYGNW | Model: 21030 | PartNumber: 21030
7/16" Tap Size.
Pack Of 1.
31/32" Head Diameter.
5/16" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon #13
Tapmatic ER20 Steel Drive Collet, 5/16" Shank, 1/16" Pipe Tap Size, 25/32" Head Diameter
Asin: B007RGYF60 | Model: 21027 | PartNumber: 21027
1/16" Pipe Tap Size.
Pack Of 1.
25/32" Head Diameter.
5/16" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon #14
Tapmatic 20833 R8 Bridgeport Arbor to #33 Jacobs Taper
Asin: B007RGY48E | Model: 20833 | PartNumber: 20833
33 Jacobs Taper.
Pack Of 1.
R-8 Bridgeport Arbor.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon #15
Arbor, 0.500 in, 3/8-24
Asin: B007IB64NG | Ean: 7804665211152
Manufacturer: Tapmatic.
Country Of Manufacture: United States.
Features
- Knobs, Handles, Work holding & Machine Tool Accessories
- Country of manufacture: United States
- Manufacturer: TAPMATIC
- See more on Amazon...
Brand: Tapmatic | Manufacturer: TAPMATIC
See On Amazon #16
Cutting Oil, 11 oz., Aerosol, Gold
Asin: B000P1NTF2 | Ean: 7424189609046
Brand: Tapmatic | Manufacturer: Tapmatic
Dimensions: 8.10 x 2.60 x 2.60 inches | Weight: 1.00 Pounds
See On Amazon #17
Tapmatic RX 30 Self-Reversing Tapping Head, #33JT Taper Mount, #0 - 1/4" and M1.4-M7 Capacity - 13033
Asin: B007RGYSPS | Model: 013033 | PartNumber: 013033
Reduced Cycle Time Through Increased 1.75 :1 Reverse Speed.
Easy Adaptation With Multiple Interchangeable Arbors.
Easy Handling, Compact Design.
Less Tap Breakage Due To Pre-Selective Torque Control.
Features
- For hard to machine material and high torque applications like roll form tapping
- Less tap breakage due to pre-selective torque control
- Reduced cycle time through increased 1.75 :1 reverse speed
- Easy handling, compact design
- Easy adaptation with multiple interchangeable arbors
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Weight: 1.50 Pounds
See On Amazon #18
Tapmatic Table Mount Torque Bar, 1-3/4" and M33 Tap Capacity
Asin: B007RGXXFE | Model: 29096 | PartNumber: 29096
The Stop Arm Should Not Be Installed Permanently, Not Under Any Circumstances Be Held By Hand Or Fastened With Wire.
The Torque Bar Installation Must Be Stronger Than The Largest Tap In The Capacity Range Of Your Tapping Attachment.
The Torque Bar Must Be Mounted Securely To The Table Of Your Machine.
Always Mount A Torque Bar To Hold The Tapping Attachment's Stop Arm From Rotating.
Features
- Mount to the "T" slots of table
- Always mount a torque bar to hold the tapping attachment's stop arm from rotating
- The stop arm should not be installed permanently, not under any circumstances be held by hand or fastened with wire
- The torque bar must be mounted securely to the table of your machine
- The torque bar installation must be stronger than the largest tap in the capacity range of your tapping attachment
- See more on Amazon...
First Available: 05/15/2017
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $488.00 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #19
Tapmatic 4175125 SynchroFlex SFT75 Tap Holder, 1" Shank Size, Cylindrical Shank, ER25 Collet
Asin: B00KAT5IBC | Model: 4175125 | PartNumber: 4175125
Improves Thread Quality.
Axial Compensation +/- 0.5 Mm.
Reduces Downtime By Lowering Frequency Of Tap Replacements.
Increases Tap Life By 100% Or More.
Features
- SFT II includes high pressure internal coolant system, increases coolant flow by 300%
- Increases tap life by 100% or more
- Improves thread quality
- Reduces downtime by lowering frequency of tap replacements
- Axial compensation +/- 0.5 mm
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $673.00 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #20
Tapmatic 4150120 SynchroFlex SFT50 Tap Holder, 1" Shank Size, Cylindrical Shank, ER20 Collet
Asin: B00KAT5I1C | Model: 4150120 | PartNumber: 4150120
Improves Thread Quality.
Axial Compensation +/- 0.5 Mm.
Reduces Downtime By Lowering Frequency Of Tap Replacements.
Increases Tap Life By 100% Or More.
Features
- SFT II includes high pressure internal coolant system, increases coolant flow by 300%
- Increases tap life by 100% or more
- Improves thread quality
- Reduces downtime by lowering frequency of tap replacements
- Axial compensation +/- 0.5 mm
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $555.00 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #21
Tapmatic 17 Tension/14 Compression Tap Chuck with Modular Straight Shank and RF Collet, M10-M30 and 1/2" - 1-1/8" Capacity, 1-1/2" Shank
Asin: B007RGYNX0 | Model: 35893 | PartNumber: 35893
Releasable Hard Start For Consistent Depth Control.
Multi-Range Collets (Rf), Adjustable Back Jaw For Driving Tap Square.
Right Hand And Left Hand Tapping.
Increased Tension And Compression.
Features
- Tapping chuck with increased tension and compression to accommodate tapping cycles that are not synchronized
- Increased tension and compression
- Releasable hard start for consistent depth control
- Right hand and left hand tapping
- Multi-range collets (RF), adjustable back jaw for driving tap square
- See more on Amazon...
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Weight: 7.60 Pounds
Amazon Price: $845.06 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #22
Tapmatic CAT40 Arbor with 1" Bore Diameter, 1-3/8" Length
Asin: B007RGYKRO | Model: 23951 | PartNumber: 23951
Pack Of 1.
Country Of Origin: India.
1" Bore Diameter.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $152.27 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #23
Tapmatic ER25 Steel Drive Collet, 37/64" Shank, 3/4" Tap Size, 31/32" Head Diameter
Asin: B007RGYK9C | Model: 21044 | PartNumber: 21044
3/4" Tap Size.
Pack Of 1.
31/32" Head Diameter.
37/64" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Dimensions: 1.40 x 2.00 x 2.00 inches | Weight: 1.00 Pounds
Amazon Price: $96.11 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #24
Tapmatic ER25 Steel Drive Collet, 35/64" Shank, 1/4" Pipe Tap Size, 31/32" Head Diameter
Asin: B007RGYJRK | Model: 21043 | PartNumber: 21043
1/4" Pipe Tap Size.
Pack Of 1.
31/32" Head Diameter.
35/64" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $95.92 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #25
Tapmatic ER25 Steel Drive Collet, 17/32" Shank, 11/16" Tap Size, 31/32" Head Diameter
Asin: B007RGYJE8 | Model: 21040 | PartNumber: 21040
11/16" Tap Size.
Pack Of 1.
31/32" Head Diameter.
17/32" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon #26
Tapmatic ER25 Steel Drive Collet, 15/32" Shank, 5/8" Tap Size, 31/32" Head Diameter
Asin: B007RGYIVW | Model: 21038 | PartNumber: 21038
5/8" Tap Size.
Pack Of 1.
31/32" Head Diameter.
15/32" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $95.56 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #27
Tapmatic ER25 Steel Drive Collet, 27/64" Shank, 9/16" Tap Size, 31/32" Head Diameter
Asin: B007RGYIF8 | Model: 21036 | PartNumber: 21036
9/16" Tap Size.
Pack Of 1.
31/32" Head Diameter.
27/64" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
Amazon Price: $151.99 | as of 05/01/2024
(12:39am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #28
Tapmatic ER25 Steel Drive Collet, 3/8" Shank, 3/8" Tap Size, 31/32" Head Diameter
Asin: B007RGYI30 | Model: 21034 | PartNumber: 21034
3/8" Tap Size.
Pack Of 1.
31/32" Head Diameter.
3/8" Shank.
Brand: Tapmatic | Manufacturer: Tapmatic Corporation
See On Amazon