Tnisesm - Buying Guide
Last Updated: 04/26/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Tnisesm 1/4"(6MM) Inch ID Fuel Line kits, 2 Meter / 6-Foot Fuel Line + 2Pcs 1/4 Inch X 5/16 Inch Gas Inline Fuel Filters with Magnet +10 Pcs 13/32''-15/32'' Mini Fuel Hose Clamps Adjustable
Asin: B093K7F3N4 | Model: 6mm | PartNumber: 6mm
Easy To Use And Install;Good To Replace It At Regular Intervals,Extra 10 Pcs Mini Fuel Hose Clamps Adjustable With Screw-Tightening Hose Clamps For More Robust Applications. Could Save You A Lot Time To Find Proper Clamp In Local Market..
Package Includes: 6 Feet 1/4" Id Fuel Line; 2 Pcs X 5/16" In Line Fuel Filters; 10 Pcs 13/32''-15/32''' Mini Fuel Hose Clamps Adjustable. Fuel Filters And Hose Clamps Are Required For The Use Of Fuel Line. The Dimensions Of The Various Components Within The Kit Are Compatible.You Do Not Need To Purchase Those Part Extra!.
Designed For Conveying Gasoline, E-85, Diesel, And Bio-Diesel, Fuels In Mowers Tractors Snow Blowers Dirt Bikes And Just About All Small With 1/4" Or 5/16" Fuel Lines Engines..
The Fuel Line Is Divided Into 3-Layers: Inner Pipe, Outer Pipe And Intermediate Reinforcing Layer. The Inner And The Outer Pipe Are Made Of Rubber And The Middle Reinforcing Layer Is A Woven Fiber Nylon Thread. Oil Resistant, Cold-Resistant And Ethanol Tolerance. 6 Foot / 2 M Hose Can Be Cut To Size For All Your Applications..
Features
- Inner diameter: 6mm; Outer diameter: 12mm; Adapt to temperature: -30 C -120 C; Wall thickness: 3.1mm/0.12".
- The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.
- Easy to use and install;Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market.
- Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small with 1/4 or 5/16 fuel lines engines.
- Package includes: 6 Feet 1/4 ID Fuel Line; 2 Pcs x 5/16 In Line Fuel Filters; 10 Pcs 13/32''-15/32''' Mini Fuel Hose Clamps Adjustable. Fuel filters and hose clamps are required for the use of fuel line. The dimensions of the various components within the kit are compatible.You do not need to purchase those part extra!
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #2
Tnisesm 1Pair Positive Negative Battery Terminal Set, Brass Battery Terminals Connectors Clamps with Battery Terminal Washers for Boat Yacht Camper Truck Car Vehicle DT-7
Asin: B08LZ8W8JQ
1 Pair Of Military Spec Positive And Negative Standard Top Post Connectors For Increased Strength And Reduced Corrosion. Made Of Brass, + And - Are Directly Marked On The Terminal. Used For Battery Extension, Parallel Connection, And Ground Connection..
Please Note The Positive And Negative End During Your Installation. Marked: "+"As Positive, "-"As Negative..
Thread Already On Terminal, Make It Faster And Easier For Installation..
Thickened Brass Battery Terminal And Fasteners Provide Excellent Corrosion Resistance To Battery Acid And Marine Environments; Superior Corrosion Resistance And Electrical Conductivity Compared To Lead Or Zinc Plated Terminals, Reducing Voltage Distortion And The Current Transmission Loss..
Features
- Used for Car, Vehicle, RV and Boat, which have a standard top post batteries (19mm positive post and 17mm negative post).
- Thickened Brass battery terminal and fasteners provide excellent corrosion resistance to battery acid and marine environments; Superior corrosion resistance and electrical conductivity compared to lead or zinc plated terminals, reducing voltage distortion and the current transmission loss.
- 1 Pair of military spec positive and negative standard top post connectors for increased strength and reduced corrosion. Made of brass, + and - are directly marked on the terminal. Used for battery extension, parallel connection, and ground connection.
- Thread already on terminal, make it faster and easier for installation.
- Please note the positive and negative end during your installation. Marked: +as Positive, -as Negative.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
Weight: 0.00 pounds
See On Amazon #3
Tnisesm 3/16 Inch ID Fuel Line Hose 10 Feet + 20Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Gas Diesel Powersports Engines and Generators
Asin: B0BV9K384T | Model: C-019-3/16 | PartNumber: C-019-3/16
It Is Suitable For Conveying Gasoline, E-85, Diesel And Biodiesel Fuels In Lawn Mowers, Cultivators, Tractors, Snow Blowers, Motorcycles, Mini-Bicycles, Cross-Country Bicycles, Generators, Garbage Pumps, Pit Bicycles, All-Terrain Vehicles, Utv, Go-Karts, Tao Tao, Four-Wheeled Vehicles, Snowmobiles, Power Pressure Washers, Marine Outboard Machines And Motors, And Almost All Of Them..
Easy To Use And Install; Replace It Regularly, And 20 Extra Fuel Hose Clips Can Better Fix The Fuel Pipe; Size Matching Can Save You A Lot Of Time In Finding Suitable Fixtures In The Local Market, And You Don't Need To Buy Those Parts Extra!.
Package Includes: 10-Foot 1/4-Inch Inner Diameter Fuel Pipe + 20Pcs Fuel Hose Clips..
Fuel Pipeline Is Oil-Resistant, Cold-Resistant And Ethanol-Resistant; Customized Super-Long 10 Feet (3 Meters) Can Be Cut According To All Your Applications..
Features
- Inner diameter: 4.8mm; Outer diameter: 8.8mm; Adapt to temperature: -22F - 338F
- Fuel pipeline is oil-resistant, cold-resistant and ethanol-resistant; Customized super-long 10 feet (3 meters) can be cut according to all your applications.
- It is suitable for conveying gasoline, E-85, diesel and biodiesel fuels in lawn mowers, cultivators, tractors, snow blowers, motorcycles, mini-bicycles, cross-country bicycles, generators, garbage pumps, pit bicycles, all-terrain vehicles, UTV, go-karts, Tao Tao, four-wheeled vehicles, snowmobiles, power pressure washers, marine outboard machines and motors, and almost all of them.
- Package includes: 10-foot 1/4-inch inner diameter fuel pipe + 20Pcs Fuel Hose Clips.
- Easy to use and install; Replace it regularly, and 20 extra fuel hose clips can better fix the fuel pipe; Size matching can save you a lot of time in finding suitable fixtures in the local market, and you don't need to buy those parts extra!
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #4
Tnisesm 5/16" 6FT Fuel Line Assembly, with Connector Rubber Marine Outboard Boat Motor RVs Fuel Assembly with Primer Bulb 304 Steel Hose Clamps
Asin: B0C6QHYGXF | Model: C-F1-043 | PartNumber: C-F1-043
〓Product Size-Total Length: 6.88Ft/2.1M; Tube Inner Diameter: 8Mm (5/16").
〓Function-Use Our Tnisesm Fuel Pipeline Assembly To Keep Your Fuel Pipeline Running At The Best Performance And Ensure The Smooth Operation Of Your Outboard Motor..
〓Application Scope-Compatible With Ethanol Mixed Fuel, Engineering Low-Permeability Material To Prevent Fuel Evaporation, Suitable For Ships, Rvs, Tractors And Caravans..
〓High Quality Fuel-Line- The Outboard Motor Gas Line Is Made Of Rubber Product, Please Do Not Store This Item Under Direct Sunlight, High Temperature Or Other Rough Environment..
Features
- Fuel Pipeline Assembly- Composed of 6 feet 5/16nitrile rubber fuel pipeline, snap-on connector, high-quality rubber ball and 304 stainless steel ear clip.
- High Quality fuel-line- The outboard motor gas line is made of rubber product, please do not store this item under direct sunlight, high temperature or other rough environment.
- Product Size-Total length: 6.88FT/2.1M; tube inner diameter: 8mm (5/16)
- Application scope-Compatible with ethanol mixed fuel, engineering low-permeability material to prevent fuel evaporation, suitable for ships, RVs, tractors and caravans.
- Function-Use our Tnisesm fuel pipeline assembly to keep your fuel pipeline running at the best performance and ensure the smooth operation of your outboard motor.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #5
Tnisesm 5 Size Fuel Line Hose - 3/8" 1/2" 5/16" 1/4" 3/16" ID NBR Rubber 3.3ft with 20Pcs Clamps for Small Engines Kawasaki EZGO Golf Cart Snowmobile Motorcycle ATV Tractor
Asin: B0C5LXY3RF
〓Fuel Hose Size-3/16(Inner Diameter: 4.8Mm; Outer Diameter: 11Mm);1/4(Inner Diameter: 6Mm; Outer Diameter: 12Mm); 5/16(Inner Diameter: 8Mm; Outer Diameter: 15Mm);3/8(Inner Diameter: 10Mm; Outer Diameter: 17Mm); 1/2(Inner Diameter: 13Mm; Outer Diameter: 20Mm)The Cost-Effective Product Portfolio Can Meet Your Different Needs At The Same Time..
〓Extensive Use-Widely Used In Oil Tanks, Oil Pumps, Engines, And Other Parts That Come In Contact With Oil.Designed For Conveying Gasoline, E-85, Diesel, And Bio-Diesel, Fuels In Mowers Tractors Snow Blowers Dirt Bikes.The Hose Clamp Included In The Product Can Help You Fix The Tubing Well And Make It Serve You For A Long Time..
〓Temperature Range:-40 F To+300 F; Maximum Working Pressure: 300 Psi; Burst Pressure: 1160 Psi; Professional Oil Resistance Dn8mm 20Bar Maximum Working Pressure..
〓High Quality Material-The Fuel Line Is Divided Into 3-Layers: Inner Pipe, Outer Pipe And Intermediate Reinforcing Layer. The Inner And The Outer Pipe Are Made Of Rubber And The Middle Reinforcing Layer Is A Woven Fiber Nylon Thread. The Wall Of Fuel Rubber Hose Is Thick Enough, Which Has The Advantages Of Not Easy To Wear, Aging, High Temperature Resistance, Low Temperature Resistance And Good Acid And Alkali Resistance..
Features
- Tubing Kit Includes-3.3ft NBR fuel line hose (inner diameter are 3/16inch, 1/4inch, 5/16inch, 1/2inch, 3/8inch) and 20Pcs Spring hose clamps. 5 different specifications can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools.
- High Quality Material-The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. The wall of fuel rubber hose is thick enough, which has the advantages of not easy to wear, aging, high temperature resistance, low temperature resistance and good acid and alkali resistance.
- Fuel Hose Size-3/16(Inner diameter: 4.8mm; Outer diameter: 11mm);1/4(Inner diameter: 6mm; Outer diameter: 12mm); 5/16(Inner diameter: 8mm; Outer diameter: 15mm);3/8(Inner diameter: 10mm; Outer diameter: 17mm); 1/2(Inner diameter: 13mm; Outer diameter: 20mm)The cost-effective product portfolio can meet your different needs at the same time.
- Temperature range:-40 F to+300 F; Maximum working pressure: 300 psi; Burst pressure: 1160 psi; Professional oil resistance DN8MM 20BAR maximum working pressure.
- Extensive Use-Widely used in oil tanks, oil pumps, engines, and other parts that come in contact with oil.Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes.The hose clamp included in the product can help you fix the tubing well and make it serve you for a long time.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
Dimensions: 0.10 x 39.60 x 0.50 Inches
See On Amazon #6
Tnisesm 42Pcs High Temp 1/16" to 3/4" Silicone Rubber Tapered Plug Kit for Powder Coating, Cerakote, Paint & General Sealing - Non-Toxic, Flexible & Reusable
Asin: B0BVB4NJG2 | Model: C-021 | PartNumber: C-021
▲ Used To Cover Holes In Powder Spraying, Painting, Electroplating, Anodizing And Sandblasting. Widely Used In Architecture, Electronics, Automobiles, Machinery Workshops, Laboratories, Etc..
▲ Tapered Hole Plug Kit Contains 42 Pieces In 8 Different Sizes, Which Are Packed In Transparent Plastic Boxes, Suitable For Any Threaded Or Unthreaded Hole With An Inner Diameter From 1/16 "To 3/4"..
▲ Different Colors Represent Different Sizes, Making It Easy To Grasp The Correct Size..
▲ Can Withstand High Temperatures Up To 600 Degrees Fahrenheit /315 Degrees Celsius..
Features
- High-quality silica gel will not crack, shrink, harden or break, and it is non-toxic and harmless and can be reused.
- Can withstand high temperatures up to 600 degrees Fahrenheit /315 degrees Celsius.
- Used to cover holes in powder spraying, painting, electroplating, anodizing and sandblasting. Widely used in architecture, electronics, automobiles, machinery workshops, laboratories, etc.
- Different colors represent different sizes, making it easy to grasp the correct size.
- Tapered hole plug kit contains 42 pieces in 8 different sizes, which are packed in transparent plastic boxes, suitable for any threaded or unthreaded hole with an inner diameter from 1/16 to 3/4.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #7
Tnisesm 35 PCS Threads Brake Line Fittings Assortment kits for 3/16"(19 Fittings) and 1/4" (16 Fittings) Inverted Flares Brake Line Tube
Asin: B0C7QLGSBJ | Model: C-G1-050-35Pcs | PartNumber: C-G1-050-35Pcs
Upgraded 16 Fittings For 1/4”Brake Line: 2 X 1/4”(7/16-24) Inverted Tube Nut; 10 X 1/4” (7/16-24) Inverted Tube Nut (Long); 2 X 1/4”(9/16-18) Inverted Tube Nut; 2 X 1/4”(1/2-20) Inverted Tube Nut;.
Application: This Brake Line Nut Is Suitable For Inverted Bellmouth On 3/16 Inch And 1/4 Inch Tube.Note:The Nut Threads Are Regular Tube Fitting Size. Please Check Before Shopping!.
3/8' - 24 Or 7/16-24 Threads Fittings Commonly Fits For Regular Inverted Flare/ Double Flare Sizes For 3/16 Or 1/4 Inch Brake Lines Tube..
Upgraded 19 Fittings For 3/16”Brake Line: 3 X 3/16” (7/16-24) Inverted Tube Nut; 12 X 3/16" (3/8-24) Inverted Tube Nut; 2 X 3/16” (1/2-20) Inverted Tube Nut; 2 X 3/16"(9/16-18) Inverted Tube Nut..
Features
- Material: Brake pipe nut is made of high strength steel, and its surface is coated with anti-corrosion layer.
- Upgraded 19 Fittings for 3/16 Brake Line: 3 x 3/16 (7/16-24) Inverted Tube Nut; 12 x 3/16 (3/8-24) Inverted Tube Nut; 2 x 3/16 (1/2-20) Inverted Tube Nut; 2 x 3/16(9/16-18) Inverted Tube Nut.
- Upgraded 16 Fittings for 1/4 Brake Line: 2 x 1/4 (7/16-24) Inverted Tube Nut; 10 x 1/4 (7/16-24) Inverted Tube Nut (Long); 2 x 1/4 (9/16-18) Inverted Tube Nut; 2 x 1/4 (1/2-20) Inverted Tube Nut;
- 3/8' - 24 or 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 or 1/4 inch brake lines tube.
- Application: This brake line nut is suitable for inverted bellmouth on 3/16 inch and 1/4 inch Tube.Note:The nut threads are regular tube fitting size. Please check before shopping!
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #8
Tnisesm Hose Clamp Pliers Clic-R Type for Automobile Collar Pliers CV Boot Clamp Repair Tools
Asin: B0BZRS3C1L
『Easy To Use』When Loosening And Reinstalling, One Side Of The Device Is Used To Tighten The Collar And The Other Side Is Used To Loosen The Collar. Just Turn The Pliers Over..
『Package Contents 』1Pcs Vise Tube Bundle Pliers.
『Application』 Clic-R Clamp Is A Good Tool For Automobile Technicians, And It Is Specially Used To Release And Reinstall The Cv Ear Clamps Of Reusable Hose Clamps /Clic-R Hose Clamps, Which Are Used In European Models, Namely (Fuel/Evaporative Emission Hoses.).
『Labor-Saving Design』Has Built-In Labor-Saving Spring, Which Is Convenient And Labor-Saving, Automatically Rebounds And Improves Work Efficiency..
Features
- Material Material The pliers head is made of forged steel coated with manganese phosphate, which is induction quenched and the cutting edge is sharper and more durably. The PVC handle is comfortable and won't slip from your hand.
- Labor-saving design has built-in labor-saving spring, which is convenient and labor-saving, automatically rebounds and improves work efficiency.
- Easy to use When loosening and reinstalling, one side of the device is used to tighten the collar and the other side is used to loosen the collar. Just turn the pliers over.
- Application CLIC-R clamp is a good tool for automobile technicians, and it is specially used to release and reinstall the CV ear clamps of reusable hose clamps /clic-r hose clamps, which are used in European models, namely (fuel/evaporative emission hoses.)
- Package Contents 1Pcs Vise Tube Bundle Pliers
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #9
Tnisesm/6pcs Coil DPDT PCB Power Relay DC 12V 8 Pins Mini Power Relay PCB Relay HK19F-8P-12V
Asin: B0874LPJ1N | Model: CAHK19F-8P-12V | PartNumber: CAHK19F-8P-12V
Number Of Pins : 8; Size (Approx.) : 2 X 1 X 1.4Cm / 0.8" X 0.4" X 0.6"(L*W*H); Weight : 51G; Package Content : 6 Pcs.
Warranty For 1 Year. If There Are Any Issues With Your Order, Please Contact Us..
Compact And Sealed Construction. Long Operational Life. The Relay Can Automatically Adjust, Protect And Transform The Circuit..
Coil Voltage : Dc12v; Contact Ratings: 1A 125Vac/2A 30Vdc; 2No 2Nc.
Features
- Product Name : PCB Power Relay; Model : HK19F
- Coil Voltage : DC12V; Contact Ratings: 1A 125VAC/2A 30VDC; 2NO 2NC
- Number of Pins : 8; Size (Approx.) : 2 x 1 x 1.4cm / 0.8 x 0.4 x 0.6(L*W*H); Weight : 51g; Package Content : 6 Pcs
- Compact and sealed construction. Long operational life. The relay can automatically adjust, protect and transform the circuit.
- Warranty for 1 year. If there are any issues with your order, please contact us.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #10
Tnisesm 9 inch Single Ear Clamp Pliers, Pinch Clamp Pliers, Ear Hose Clamps Tool, for Automotive Nail Puller Single Ear Hose Clamps Pliers
Asin: B0BXNFG279
Ear Clamp Is A Perfect Tool For Installing And Disassembling Single Ear Hose Clamp, Double Ear Clamp And Stepless Clamp. Easy To Disassemble And Operate. It Can Also Be Used As A Nail Puller, Which Can Cut Both Steel Wires And Iron Wires..
Clamp The Hose Clamp With A Moderate Force With One Hand, And The Clamp Is Installed And Disassembled More Easily. In Addition, Use One Hand To Clamp The Clamp At One Ear Position..
Features
- Ear clamps are suitable for simply and reliably clamping 1 ear and 2 ear clamps. The slender head design enables good contact in narrow areas without damaging the pressing points on the ear clip.
- Clamp the hose clamp with a moderate force with one hand, and the clamp is installed and disassembled more easily. In addition, use one hand to clamp the clamp at one ear position.
- Ear clamp is a perfect tool for installing and disassembling single ear hose clamp, double ear clamp and stepless clamp. Easy to disassemble and operate. It can also be used as a nail puller, which can cut both steel wires and iron wires.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #11
Tnisesm 10-inch 304 Stainless Steel J Hook Battery Hold Down Bolts
Asin: B09TVYPTRT | Model: C-011-10inch | PartNumber: C-011-10inch
Packaging Content: J-Hooks, Hex Nuts, Spring Lock Washers, Flat Washers, And Rubber Protective Sleeves..
Tips: Before Ordering, Please Measure The Battery Size And Confirm Whether The Bolt Length Is Appropriate..
Works With Most Batteries Found In Gm General Motors Vehicles..
This 8Inchj Bolt Set Is Made Of 304 Stainless Steel, Which Is Durably And Has A Long Service Life.J Bolt Group Is Usually Used With Battery Tray, Battery Frame And Pressing Device (These Devices Are Not Included)..
Features
- This 8inchj bolt set is made of 304 stainless steel, which is durably and has a long service life.
- This 8inchj bolt set is made of 304 stainless steel, which is durably and has a long service life.J bolt group is usually used with battery tray, battery frame and pressing device (these devices are not included).
- Packaging content: J-Hooks, hex nuts, spring lock washers, flat washers, and rubber protective sleeves.
- Works with most batteries found in GM general motors vehicles.
- Tips: Before ordering, please measure the battery size and confirm whether the bolt length is appropriate.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #12
Tnisesm 2PCS Power Relay SPST(1 NO) AC120V Coil, 30A SPST 120 VAC with Flange Mounting and 8 Quick Connect Terminals Wires Mini Relay HF105F-4-AC120V-8X
Asin: B087G3FWVT | Model: HF105F-4-AC120V-8X | PartNumber: HF105F-4-AC120V-8X
Easy To Use: Attached With Crimping Terminals Wires For Worry-Free Installation..
Package Content : 2 X Power Relay + 8 X Terminal Wire.
Epoxy Sealed Versions Available.
Coil Voltage : Ac 120V; 30A Spst 240Vac.
Features
- Product Type: Power Relay with Terminal Wires; SPST(1NO)
- Coil Voltage : AC 120V; 30A SPST 240VAC
- Easy to use: Attached with crimping terminals wires for worry-free installation.
- Epoxy sealed versions available
- Package Content : 2 x Power Relay + 8 x Terminal Wire
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #13
Tnisesm 100Pcs Silicone Rubber Tapered Plug Assortment Kits 1/16" to 1/2" for Masking Off Holes During Powder Coating, Painting, Hydro Dipping, Media Blasting
Asin: B0CHVBDXN2
▲ Used To Cover Holes In Powder Spraying, Painting, Electroplating, Anodizing And Sandblasting. Widely Used In Architecture, Electronics, Automobiles, Machinery Workshops, Laboratories, Etc..
▲ Tapered Hole Plug Kit Contains 100 Pieces In 7 Different Sizes, Which Are Packed In Transparent Plastic Boxes, Suitable For Any Threaded Or Unthreaded Hole With An Inner Diameter From 1/16 "To 1/2"..
▲ Different Colors Represent Different Sizes, Making It Easy To Grasp The Correct Size..
▲ Can Withstand High Temperatures Up To 600 Degrees Fahrenheit /315 Degrees Celsius..
Features
- High-quality silica gel will not crack, shrink, harden or break, and it is non-toxic and harmless and can be reused.
- Can withstand high temperatures up to 600 degrees Fahrenheit /315 degrees Celsius.
- Used to cover holes in powder spraying, painting, electroplating, anodizing and sandblasting. Widely used in architecture, electronics, automobiles, machinery workshops, laboratories, etc.
- Different colors represent different sizes, making it easy to grasp the correct size.
- Tapered hole plug kit contains 100 pieces in 7 different sizes, which are packed in transparent plastic boxes, suitable for any threaded or unthreaded hole with an inner diameter from 1/16 to 1/2.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #14
Tnisesm Hose Clamps Pliers Repair Tool Swivel Flat Band For Removal and Installation of Ring-Type or Flat-Band Hose Clamp
Asin: B0BK39ZDDM
The Locking Function Makes It Easy To Adjust The Opening Size Of The Hose Clamp Pliers And Keep It Open.The Spring Is Firm And Not Easy To Fall Off To Prevent Finger Injury..
Tips Trap And Hold Clamp And Swivel For Multiple Angle Access.For Fuel & Coolant Pipe Spring Clips..
With A Max Opening Of 1-3/4”, These Hose Clamp Pliers Can Be Used On Most Ring-Type Or Flat-Band Hose Clamps For Easy Removal And Installation..
The Ergonomic Handle Is Made Of Pvc Material With Non-Slip Properties,Which Can Relieve Hand Fatigue And Improve Work Efficiency..
Features
- The hose clamp pliers are made of high quality carbon steel with high temperature surface treatment,high hardness,good toughness and durability.Spring clips for fuel and coolant lines for a variety of vehicles.
- The ergonomic handle is made of PVC material with non-slip properties,which can relieve hand fatigue and improve work efficiency.
- The locking function makes it easy to adjust the opening size of the hose clamp pliers and keep it open.The spring is firm and not easy to fall off to prevent finger injury.
- With a max opening of 1-3/4 , these Hose Clamp Pliers can be used on most ring-type or flat-band hose clamps for easy removal and installation.
- Tips trap and hold clamp and swivel for multiple angle access.For fuel & coolant pipe spring clips.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #15
Tnisesm 32Pcs 1/4" 5/16" 3/8" Fuel Injection Gas Line Hose Clamps Clip Pipe Clamp Assortment Kit, Hoses Clamps Sleeving,For Automotive Diesel Petrol Pipe
Asin: B0CTFLDZG3
〖Will Not Break〗These Mini Fuel Injection Line Style Hose Clamps Are Edge Polished Smooth To Hold Securely And Without Damaging The Hoses. Excellent For Sealing Hoses Against Loss Of Liquid, Saving Your Time And Money On Costly Repairs The Pipe..
〖Widely Used〗These Clamps Are Locking Secure And Tight, Would Work Much Better Than Standard Hose Clamps, This Small High Pressure Hose Clamps Fit For Air Hose, Water Pipe,Fuel Hose,Silicone Hose,Etc.Widely Used In Diesel Petrol Pipe, Home Use,Auto Repair,Marine,Plumbing,Agriculture,Industrial Ect..
〖Adjustable Style〗All Hose Clamps With Adjustable Screws Can Effectively Solve The Problem Of Air Or Liquid Leaking From The Hose Without Worrying About Deformation Or Falling Off After Tightening. Equipped With A Socket Wrench, So You Can Install And Remove It At Any Time With The Socket Wrench..
They Also Strong And Durably When Installing On The Tube, You Will No Longer Worry About Them Rusting And Breaking..
Features
- Hose Clamp Size 32Pcs Mini Fuel Injection Clamps are packed in a strong box. 3 different sizes- 7/16"-1/2", 1/2"-9/16", 9/16"-5/8".
- They also strong and durably when installing on the tube, you will no longer worry about them rusting and breaking.
- Will Not Break These mini fuel injection line style hose clamps are edge polished smooth to hold securely and without damaging the hoses. Excellent for sealing hoses against loss of liquid, saving your time and money on costly repairs the pipe.
- Adjustable Style All hose clamps with adjustable screws can effectively solve the problem of air or liquid leaking from the hose without worrying about deformation or falling off after tightening. Equipped with a socket wrench, so you can install and remove it at any time with the socket wrench.
- Widely Used These clamps are locking secure and tight, would work much better than standard hose clamps, This small high pressure hose clamps fit for air hose, water pipe,fuel hose,silicone hose,etc.Widely used in diesel petrol pipe, home use,auto repair,marine,plumbing,agriculture,industrial ect.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #16
Tnisesm Gas Fuel Line Hose with Fuel Filters Inline Shut Off Valve Petcock Set SPring Clamps for 50cc 70cc 90cc 110cc 125cc 150cc Coolster Apollo Baja ATV Four Wheeler Moped Scooter Dirt Pit Bike
Asin: B0CLRDGDNC
〖Inline Fuel Valve〗All Metal Design,Oem Standard Fuel Petcock, Easy Install, Against Reasonable Resistance..
〖Note〗Please Carefully Check Our Pictures And Product Descriptions, And Then Compare Them With Your Original Products Before Ordering To Ensure That They Are What You Need..
〖Spring Clips〗Equipped With 6Pcs Spring Clips And 6Pcs Spring Hose Clips, Which Can Be Replaced At Will. The Spring Hose Clips Are More Secure.All Made Of 65Mn Spring Steel, With Galvanized Surface, Corrosion Resistance, Rust Resistance, Durability And Fracture Resistance..
〖Gas Inline Fuel Filter〗Equipped With 4, Can Be Replaced At Will.The Number Of Pleats Of The Filter Paper Is Dense, And It Sticks Firmly To The Shell Without Gaps. Built-In Magnet Can Absorb Metal Impurities, Purify Gasoline And Protect Engine..
Features
- Fuel Line Hose Inner diameter: 4.8mm; Outer diameter: 8.8mm; Made of high quality rubber material, high toughness and not easy to deform.
- Gas Inline Fuel Filter Equipped with 4, can be replaced at will.The number of pleats of the filter paper is dense, and it sticks firmly to the shell without gaps. Built-in magnet can absorb metal impurities, purify gasoline and protect engine.
- Inline Fuel Valve All metal design,OEM standard fuel petcock, Easy install, against reasonable resistance.
- Spring Clips Equipped with 6pcs spring clips and 6pcs spring hose clips, which can be replaced at will. The spring hose clips are more secure.All made of 65Mn spring steel, with galvanized surface, corrosion resistance, rust resistance, durability and fracture resistance.
- Note Please carefully check our pictures and product descriptions, and then compare them with your original products before ordering to ensure that they are what you need.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #17
Tnisesm 3/16 Brake Line Kit 25Ft, Brake Line Flaring Tools kit Including Tubing Bender Cutter Brake 2 Unions Brake Line Fittings and 16 Fittings
Asin: B0CLR8J5RY
〖Brake Line Fittings〗14Pcs 3/16"(3/8-24) Inverted Tube Nut,2Pcs 3/16" (7/16-24) Inverted Tube Nut,2Pcs 3/16"(1/2-20) Inverted Tube Nut,2Pcs 3/16"(9/16-18) Inverted Tube Nut, 2Pcs Unions.
〖Widely Used〗Brake Pipe And Accessory Tools Are Widely Used In Domestic, Industrial And Commercial Applications. Suitable For Most Fuel Systems, Hydraulic Braking Systems And Transmission Systems..
〖180 Degree Tubing Bender〗According To The Angle You Need, From 0-180 Degrees, This Pipe Bender Is A 3-In-1 Tool, Which Can Be Installed In 1/4, 5/16 And 3/8 Inches(6, 8, 10 Mm) Copper, Aluminum, Brass And Thin Stainless Steel Pipes.
〖High Quality Materials〗The Brake Tube Is Made Of Copper-Plated Alloy, Will Be More Corrosion-Resistant Than Standard Steel Pipes.Which Is Easy To Bend By Hand And Expand; Union Are Made Of Brass, Which Is Not Easy To Rust And Has The Longest Service Life..
Features
- Brake Flaring Tools 1 flaring rod, 1 flaring cone 1 pipe cutter) is suitable for oil tubing with outer diameters of 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"(6mm,8mm,10mm,12mm,14mm,15mm). Used for flaring: copper, brass, magnesium, aluminum and mild steel brake tubing.
- High Quality Materials The brake tube is made of copper-plated alloy, will be more corrosion-resistant than standard steel pipes.which is easy to bend by hand and expand; Union are made of brass, which is not easy to rust and has the longest service life.
- Brake Line Fittings 14Pcs 3/16(3/8-24) Inverted Tube Nut,2Pcs 3/16 (7/16-24) Inverted Tube Nut,2Pcs 3/16(1/2-20) Inverted Tube Nut,2Pcs 3/16(9/16-18) Inverted Tube Nut, 2Pcs Unions
- 180 Degree Tubing Bender According to the angle you need, from 0-180 degrees, this pipe bender is a 3-in-1 tool, which can be installed in 1/4, 5/16 and 3/8 inches(6, 8, 10 mm) copper, aluminum, brass and thin stainless steel pipes
- Widely Used Brake pipe and accessory tools are widely used in domestic, industrial and commercial applications. Suitable for most fuel systems, hydraulic braking systems and transmission systems.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #18
Tnisesm 105Pcs 1/16" to 5/8" Silicone Rubber Tapered Plug Assortment Kits for Masking Off Holes During Powder Coating, Painting, Hydro Dipping, Media Blasting
Asin: B0BVB2NFQ4
▲ Used To Cover Holes In Powder Spraying, Painting, Electroplating, Anodizing And Sandblasting. Widely Used In Architecture, Electronics, Automobiles, Machinery Workshops, Laboratories, Etc..
▲ Tapered Hole Plug Kit Contains 105 Pieces In 8 Different Sizes, Which Are Packed In Transparent Plastic Boxes, Suitable For Any Threaded Or Unthreaded Hole With An Inner Diameter From 1/16 "To 5/8"..
▲ Different Colors Represent Different Sizes, Making It Easy To Grasp The Correct Size..
▲ Can Withstand High Temperatures Up To 600 Degrees Fahrenheit /315 Degrees Celsius..
Features
- High-quality silica gel will not crack, shrink, harden or break, and it is non-toxic and harmless and can be reused.
- Can withstand high temperatures up to 600 degrees Fahrenheit /315 degrees Celsius.
- Used to cover holes in powder spraying, painting, electroplating, anodizing and sandblasting. Widely used in architecture, electronics, automobiles, machinery workshops, laboratories, etc.
- Different colors represent different sizes, making it easy to grasp the correct size.
- Tapered hole plug kit contains 105 pieces in 8 different sizes, which are packed in transparent plastic boxes, suitable for any threaded or unthreaded hole with an inner diameter from 1/16 to 5/8.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #19
Tnisesm 12Pcs 7/16"-24 Threads Brake Line Fittings Assortment For 1/4" Brake Line Tube(4 Unions, 8 Nuts)
Asin: B0C7QM515B
Material: Brake Pipe Union Is Made Of Pure Copper With High Strength. Brake Pipe Nut Is Made Of High Strength Steel, And Its Surface Is Coated With Anti-Corrosion Layer..
1/4" Brake Line Fittings:12 Fittings For 1/4" Brake Line: 4 X 7/16-24 Threads Unions; 8 X Metric 7/16-24 Threads Nuts..
Suitable For 1/4 Inch Sae Inverted Bell Mouth And Double Bell Mouth Size..
Size:The Threads Are 7/16 Inch With A Thread Pitch Of 24..
Features
- The joint and nut are all metric 7/16-24 threads (conventional 1/4 inch pipe fitting size).
- Size:The threads are 7/16 inch with a thread pitch of 24.
- Material: brake pipe union is made of pure copper with high strength. Brake pipe nut is made of high strength steel, and its surface is coated with anti-corrosion layer.
- Suitable for 1/4 inch SAE inverted bell mouth and double bell mouth size.
- 1/4 Brake Line Fittings:12 Fittings for 1/4 Brake Line: 4 x 7/16-24 threads unions; 8 x metric 7/16-24 threads nuts.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #20
Tnisesm Upgraded Brake Line Tubing Kit- 25Ft, 3/16 Copper Coated Flexible Tube (Includes 4 Unions,24 Inverted Flare Fittings)
Asin: B0C5CZJVC4
3/16 Brake Line Tubing Kit Is Usually Suitable For The Replacement Of Hydraulic And Abs Brake Systems, Fuel, Power Steering And Transmission Cooling Pipes. It Is Also Widely Used For Domestic, Industrial And Commercial Purposes..
Package Include:1 X Replacement Brake Line + 28 X Most Common Inverted Tube Nut:18 X 3/16" (3/8-24) Inverted Tube Nut;2 X 3/16" (7/16-24) Inverted Tube Nut;2 X 3/16" (1/2-20) Inverted Tube Nut;2 X 3/16"(9/16-18) Inverted Tube Nut;4 X 3/16" (3/8-24) Threads Unions.
Size: 25 Ft X 3/16" Od (4.8Mm).0.028" Wall Thickness, 3/16" Od..
Tnisesm Brake Line Is Easy To Bend By Hand, With Great Flexibility, And Can Be Opened By Simple Tools..
Features
- Copper-nickel alloy brake line is the most durably brake line after unique surface treatment, which is much better than standard steel pipe.
- Tnisesm brake line is easy to bend by hand, with great flexibility, and can be opened by simple tools.
- 3/16 brake line tubing kit is usually suitable for the replacement of hydraulic and ABS brake systems, fuel, power steering and transmission cooling pipes. It is also widely used for domestic, industrial and commercial purposes.
- Size: 25 Ft x 3/16 OD (4.8mm).0.028 wall thickness, 3/16 OD.
- Package include:1 x Replacement brake line + 28 x most common inverted tube nut:18 x 3/16 (3/8-24) Inverted Tube Nut;2 x 3/16 (7/16-24) Inverted Tube Nut;2 x 3/16 (1/2-20) Inverted Tube Nut;2 x 3/16(9/16-18) Inverted Tube Nut;4 x 3/16 (3/8-24) threads unions
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
Dimensions: 0.10 x 300.00 x 0.19 inches
See On Amazon #21
Tnisesm 1/4" Brake Line Tubing Kit, Upgrade Flexible Copper Nickel Brake Line Tubing Roll for hydraulic brakes Fuel Transmission System
Asin: B0CBWHWXJK
1/4 Brake Line Tubing Kit Is Usually Suitable For The Replacement Of Hydraulic And Abs Brake Systems, Fuel, Power Steering And Transmission Cooling Pipes. It Is Also Widely Used For Domestic, Industrial And Commercial Purposes..
Package Include:1 X 15Ft Replacement Brake Line With No Fittings..
Size: 15 Ft X 1/4" Od (6.4Mm).0.028" Wall Thickness, 1/4" Od..
Copper-Nickel Alloy Brake Line Is The Most Durably Brake Line After Unique Surface Treatment, Which Is Much Better Than Standard Steel Pipe..
Features
- Tnisesm 1/4 brake line is easy to bend by hand, with great flexibility, and can be opened by simple tools.
- Copper-nickel alloy brake line is the most durably brake line after unique surface treatment, which is much better than standard steel pipe.
- 1/4 brake line tubing kit is usually suitable for the replacement of hydraulic and ABS brake systems, fuel, power steering and transmission cooling pipes. It is also widely used for domestic, industrial and commercial purposes.
- Size: 15 Ft x 1/4 OD (6.4mm).0.028 wall thickness, 1/4 OD.
- Package include:1 x 15FT Replacement brake line with No Fittings.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #22
Tnisesm 12Pcs 3/8"-24 Threads Brake Line Fittings Assortment For 3/16" Brake Line Tube(4 Unions, 8 Nuts)
Asin: B0C7QLLNKK
Material: Brake Pipe Union Is Made Of Pure Copper With High Strength. Brake Pipe Nut Is Made Of High Strength Steel, And Its Surface Is Coated With Anti-Corrosion Layer..
3/16" Brake Line Fittings: 12 Fittings For 4 X 3/8-24 Threads Unions; 8 X 3/8-24 Threads Nuts..
Suitable For 3/16 Inch Sae Inverted Bell Mouth And Double Bell Mouth Size..
Size:The Threads Are 3/8 Inch With A Thread Pitch Of 24..
Features
- The joint and nut are metric 3/8-24 threads (conventional 3/16 inch pipe fitting size).
- Size:The threads are 3/8 inch with a thread pitch of 24.
- Material: brake pipe union is made of pure copper with high strength. Brake pipe nut is made of high strength steel, and its surface is coated with anti-corrosion layer.
- Suitable for 3/16 inch SAE inverted bell mouth and double bell mouth size.
- 3/16 Brake Line Fittings: 12 Fittings for 4 x 3/8-24 threads unions; 8 x 3/8-24 threads nuts.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #23
Tnisesm 3/16" Brake Line Tubing Kit, Upgrade Flexible Copper Nickel Brake Line Tubing Roll for hydraulic brakes Fuel Transmission System
Asin: B0C6KHVCFB
3/16 Brake Line Tubing Kit Is Usually Suitable For The Replacement Of Hydraulic And Abs Brake Systems, Fuel, Power Steering And Transmission Cooling Pipes. It Is Also Widely Used For Domestic, Industrial And Commercial Purposes..
Package Include:1 X 20Ft Replacement Brake Line With No Fittings..
Size: 20 Ft X 3/16" Od (4.8Mm).0.028" Wall Thickness, 3/16" Od..
Copper-Nickel Alloy Brake Line Is The Most Durably Brake Line After Unique Surface Treatment, Which Is Much Better Than Standard Steel Pipe..
Features
- Tnisesm 3/16 brake line is easy to bend by hand, with great flexibility, and can be opened by simple tools.
- Copper-nickel alloy brake line is the most durably brake line after unique surface treatment, which is much better than standard steel pipe.
- 3/16 brake line tubing kit is usually suitable for the replacement of hydraulic and ABS brake systems, fuel, power steering and transmission cooling pipes. It is also widely used for domestic, industrial and commercial purposes.
- Size: 20 Ft x 3/16 OD (4.8mm).0.028 wall thickness, 3/16 OD.
- Package include:1 x 20FT Replacement brake line with No Fittings.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #24
Tnisesm Blue Billet Aluminum Battery Hold Down Bracket with 18-8(304) Stainless Steel 8 inch Bolts J Bolts
Asin: B0BYMHPLYP
The Total Length Of The Battery Tie Down Bracket Is 218 Mm (8.58"), The Distance Between The Bolt Centres 190 Mm (7.48") And The Length Of The Bolt Is 200 Mm (8")..
Product Includes：1Pcs X Battery Hold Down Bracket, 2Pcs X 8In J-Hooks, 2Pcs Hex Nuts, 2Pcs X Rubber Protective Sleeves, 2Pcsx Protective Rubber Washers, 2Pcsx Spring Lock Washers, 2Pcsx Flat Washers，2Pcs Butterfly Nut. Easy To Install And Provides Stable Support For The Battery..
The Surface Is Anodized For A Matte And Durably Finish. Easy To Install And Uninstall, Provides Steady Holding For The Battery. Please Confirm Size Specifications For Fitment Before Purchasing..
Designed For Batteries 6.89" (175Mm) Wide Or Slightly Narrower..
Features
- High quality aluminum alloy crossbar and 18-8(304) stainless steel J bolt set.
- Designed for batteries 6.89 (175mm) wide or slightly narrower.
- The total length of the battery tie down bracket is 218 mm (8.58), the distance between the bolt centres 190 mm (7.48) and the length of the bolt is 200 mm (8).
- The surface is anodized for a matte and durably finish. Easy to install and uninstall, provides steady holding for the battery. Please confirm size specifications for fitment before purchasing.
- Product includes 1Pcs x battery hold down bracket, 2Pcs x 8in J-hooks, 2Pcs hex nuts, 2Pcs x rubber protective sleeves, 2Pcsx protective rubber washers, 2Pcsx spring lock washers, 2Pcsx flat washers 2Pcs butterfly nut. Easy to install and provides stable support for the battery.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #25
Tnisesm Upgraded Brake Line Tubing Kit- 25Ft, 1/4 Copper Coated Flexible Tube (Includes 4 Unions,24 Inverted Flare Fittings)
Asin: B0C6KKD2FW
1/4 Brake Line Tubing Kit Is Usually Suitable For The Replacement Of Hydraulic And Abs Brake Systems, Fuel, Power Steering And Transmission Cooling Pipes. It Is Also Widely Used For Domestic, Industrial And Commercial Purposes..
Package Include:1 X 25Ft Replacement Brake Line With No Fittings..
Size: 25 Ft X 1/4" Od (6.35Mm).0.028" Wall Thickness, 1/4" Od..
Copper-Nickel Alloy Brake Line Is The Most Durably Brake Line After Unique Surface Treatment, Which Is Much Better Than Standard Steel Pipe..
Features
- Tnisesm 1/4 brake line is easy to bend by hand, with great flexibility, and can be opened by simple tools.
- Copper-nickel alloy brake line is the most durably brake line after unique surface treatment, which is much better than standard steel pipe.
- 1/4 brake line tubing kit is usually suitable for the replacement of hydraulic and ABS brake systems, fuel, power steering and transmission cooling pipes. It is also widely used for domestic, industrial and commercial purposes.
- Size: 25 Ft x 1/4 OD (6.35mm).0.028 wall thickness, 1/4 OD.
- Package include:1 x 25FT Replacement brake line with No Fittings.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
Dimensions: 0.10 x 300.00 x 0.25 inches
See On Amazon #26
Tnisesm 3/16 Copper Coated Brake Line Kit 25 ft + Blue Tube Bender+ Copper Aluminum Brake Line Double & Single Flaring Tool Kit,Consisting of 4 Unions Brake Line Fittings and 16 Fittings
Asin: B0C6KJTP62 | Model: G1-059+F1-044+C-031 | PartNumber: G1-059+F1-044+C-031
28Pcs Fittings: 2Pcs X 3/16 Inch (1/2-20 Inch) Inverted Pipe Nut; 2 Pcs X 3/16 "(7/16-24) Barrel Nut; 18Pcs X 3/16 "(3/8-24) Barrel Nut; 4Pcs X 3/16 Inch (3/8-24 Inch) Threaded Joint; 2Pcs X 3/16 "(9/16-18) Barrel Nut..
Brake Line Bender: Use With Tubing With Outer Diameter 1/8, 3/16, And 1/4 In..
The Brake Pipe Flaring Tool (1 Blow Box, 1 Pipe Cutter, 1 Flaring Rod, 1 Flaring Cone And 5 Adapters) Is Suitable For Oil Pipes With Outer Diameters Of 1/2 ",3/8", 5/16 ",1/4" And 3/16 ". Used For Single Or Double Flaring Of Various Materials, Making Single Or Double Horns: Copper, Brass, Magnesium, Aluminum And Mild Steel Brake Tubing..
Product Material: The Brake Pipe Is Made Of Copper-Plated Alloy, Which Is Easy To Bend By Hand And Expand; Pipeline Fittings Are All Made Of Brass, Which Is Not Easy To Rust And Has The Longest Service Life..
Features
- Product name: 3/16 copper-plated brake pipe kit 25 ft+ brake pipe double-flared and single-flared 45-degree kit with 4 loose joints and 16 joints+Blue pipe bender.
- Product material: the brake pipe is made of copper-plated alloy, which is easy to bend by hand and expand; Pipeline fittings are all made of brass, which is not easy to rust and has the longest service life.
- 28Pcs fittings: 2Pcs x 3/16 inch (1/2-20 inch) inverted pipe nut; 2 Pcs x 3/16 (7/16-24) barrel nut; 18Pcs x 3/16 (3/8-24) barrel nut; 4Pcs x 3/16 inch (3/8-24 inch) threaded joint; 2Pcs x 3/16 (9/16-18) barrel nut.
- The brake pipe flaring tool (1 blow box, 1 pipe cutter, 1 flaring rod, 1 flaring cone and 5 adapters) is suitable for oil pipes with outer diameters of 1/2 ,3/8, 5/16 ,1/4 and 3/16 . Used for single or double flaring of various materials, making single or double horns: copper, brass, magnesium, aluminum and mild steel brake tubing.
- Brake line bender: Use with tubing with outer diameter 1/8, 3/16, and 1/4 in.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #27
Tnisesm Microwave Capacitor 0.91uF 2100V, High Voltage Capacitor 1/4" Standard Terminal Connection Pin, Compatible with Whirlpool etc.
Asin: B0B7ZYGQ9C | Model: BC-2100V-0.91UF | PartNumber: BC-2100V-0.91UF
Product Dimensions: 3.3"X2"X1.3"(80X52x33mm); Dimension Of Connection Terminal: 0.25 X 0.03 Inch (6.34 X 0.8 Mm).
Package: 1Pcs X Microwave High Voltage Capacitor+Convenient Wiring With 4Pcs 6.3Mm Spade Terminal.
Application: Cqc And Vde Certification, Applicable To Ge ,Lg, Whirlpool, Etc., Compatible With Wb27x10011,2501-001011 And Other Models..
Rated Voltage: Ac 2100V; Capacitor Volume: 0.91 Uf Mfd; Tolerance: 3%; 50/60Hz.
Features
- Product Name: Microwave High Voltage Capacitor; Connecting pin: 1/4 "standard terminal; 2+2 terminal, with a built-in 10M ohm resistor, to ensure the safety of high voltage.
- Rated voltage: AC 2100V; Capacitor volume: 0.91 uF MFD; Tolerance: 3%; 50/60Hz
- Product dimensions: 3.3x2x1.3(80x52x33mm); Dimension of connection terminal: 0.25 x 0.03 inch (6.34 x 0.8 mm)
- Application: CQC and VDE certification, applicable to GE ,LG, Whirlpool, etc., compatible with WB27X10011,2501-001011 and other models.
- Package: 1pcs x microwave high voltage capacitor+convenient wiring with 4pcs 6.3mm spade terminal
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #28
Tnisesm 12Pcs 691034 692313 Fuel Pump with Fuel Filter for 808656 491922 Kohler 24 393 04-S 24 393 16-S Honda 16700-Z0J-003 J D LG808656 M145667 Kawasaki 49040-7001 Lawn Mower
Asin: B0CBWHH2CJ
Fit For Kawasaki 49040-7001 490407001, Replace John Deere Lg808656 M138498 M145667.
Fit For Honda Gx100u Gc135 Gc160 Gc160a Gc160la Gc160le Gc190a Gc190la Gs190a Gcv520u Gcv530 Gcv530u Gx610k1 Gx610r1 Gx610u1 Gx620 Gx670 Gxv610 Gxv620 Gxv670.
Fit For Kohler 24 393 04-S 24 393 16-S 24 393 02.
Fit For Kawasaki Fh381v Fh430v Fh451v Fh500v Fh531v Fh541v Fh580v Fh601d Fh601v Fh641d Fh641v Fh661v Fh680d Fh680v Fh721d Fh721v Fh381v Fh770d Fd731v Fx730v Fx751v Fx801v Fx850v.
Features
- Fit For BS 808656 807429 491922 691034 692313 751-3103.To avoid any delays or complications, please verify your engine's model and part numbers before purchasing the parts you need.
- Fit For Kawasaki FH381V FH430V FH451V FH500V FH531V FH541V FH580V FH601D FH601V FH641D FH641V FH661V FH680D FH680V FH721D FH721V FH381V FH770D FD731V FX730V FX751V FX801V FX850V
- Fit For Kawasaki 49040-7001 490407001, Replace John Deere LG808656 M138498 M145667
- Fit For Kohler 24 393 04-S 24 393 16-S 24 393 02
- Fit For Honda GX100U GC135 GC160 GC160A GC160LA GC160LE GC190A GC190LA GS190A GCV520U GCV530 GCV530U GX610K1 GX610R1 GX610U1 GX620 GX670 GXV610 GXV620 GXV670
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #29
Tnisesm 3/16 Flexible Zinc-Coated Steel Brake Line Kit 25 ft + Copper Aluminum Brake Line Double & Single Flaring Tool Kit,Consisting of 4 Unions Brake Line Fittings and 16 Fittings,45 Degrees, Red
Asin: B0CBLZW3LW | Model: G1-059+F1-044-Silve | PartNumber: G1-059+F1-044-Silve
28Pcs Fittings: 2Pcs X 3/16 Inch (1/2-20 Inch) Inverted Pipe Nut; 2 Pcs X 3/16 "(7/16-24) Barrel Nut; 18Pcs X 3/16 "(3/8-24) Barrel Nut; 4Pcs X 3/16 Inch (3/8-24 Inch) Threaded Joint; 2Pcs X 3/16 "(9/16-18) Barrel Nut..
Brake Pipe And Accessory Tools Are Widely Used In Domestic, Industrial And Commercial Applications. Suitable For Most Fuel Systems, Hydraulic Braking Systems And Transmission Systems..
The Brake Pipe Flaring Tool (1 Blow Box, 1 Pipe Cutter, 1 Flaring Rod, 1 Flaring Cone And 5 Adapters) Is Suitable For Oil Pipes With Outer Diameters Of 1/2 ",3/8", 5/16 ",1/4" And 3/16 ". Used For Single Or Double Flaring Of Various Materials, Making Single Or Double Horns: Copper, Brass, Magnesium, Aluminum And Mild Steel Brake Tubing..
Product Material: The Brake Pipe Is Made Of Flexible Zinc-Coated Steel, Which Is Easy To Bend By Hand And Expand; Pipeline Fittings Are All Made Of Brass, Which Is Not Easy To Rust And Has The Longest Service Life..
Features
- Product name: 3/16 Flexible Zinc-Coated Steel brake pipe kit 25 ft+ brake pipe double-flared and single-flared 45-degree kit with 4 loose joints and 16 joints.
- Product material: The brake pipe is made of Flexible Zinc-Coated Steel, which is easy to bend by hand and expand; Pipeline fittings are all made of brass, which is not easy to rust and has the longest service life.
- 28Pcs fittings: 2Pcs x 3/16 inch (1/2-20 inch) inverted pipe nut; 2 Pcs x 3/16 (7/16-24) barrel nut; 18Pcs x 3/16 (3/8-24) barrel nut; 4Pcs x 3/16 inch (3/8-24 inch) threaded joint; 2Pcs x 3/16 (9/16-18) barrel nut.
- The brake pipe flaring tool (1 blow box, 1 pipe cutter, 1 flaring rod, 1 flaring cone and 5 adapters) is suitable for oil pipes with outer diameters of 1/2 ,3/8, 5/16 ,1/4 and 3/16 . Used for single or double flaring of various materials, making single or double horns: copper, brass, magnesium, aluminum and mild steel brake tubing.
- Brake pipe and accessory tools are widely used in domestic, industrial and commercial applications. Suitable for most fuel systems, hydraulic braking systems and transmission systems.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #30
Tnisesm 30Pcs 9/16"-5/8"&1/2"-9/16" Mini Fuel Injection Hose Clamps Adjustable 304 Stainless Steel Fuel Line Clamps Assortment Kit,Hoses Clamps Sleeving with Socket Spanner
Asin: B0CCCKVWWG
〖Will Not Break〗These Mini Fuel Injection Line Style Hose Clamps Are Edge Polished Smooth To Hold Securely And Without Damaging The Hoses. Excellent For Sealing Hoses Against Loss Of Liquid, Saving Your Time And Money On Costly Repairs The Pipe..
〖Widely Used〗These Clamps Are Locking Secure And Tight, Would Work Much Better Than Standard Hose Clamps, This Small High Pressure Hose Clamps Fit For Air Hose, Water Pipe,Fuel Hose,Silicone Hose,Etc.Widely Used In Diesel Petrol Pipe, Home Use,Auto Repair,Marine,Plumbing,Agriculture,Industrial Ect..
〖Adjustable Style〗All Hose Clamps With Adjustable Screws Can Effectively Solve The Problem Of Air Or Liquid Leaking From The Hose Without Worrying About Deformation Or Falling Off After Tightening. Equipped With A Socket Wrench, So You Can Install And Remove It At Any Time With The Socket Wrench..
〖304 Stainless Steel Material〗All The Hose Clamps Are Made Of High Quality 304 Stainless Steel,(Includes Screws And Nuts) They Have Superior Rust Resistance And The Excellent Of Oxidation Resistance In A Humid Environment. They Also Strong And Durable When Installing On The Tube, You Will No Longer Worry About Them Rusting And Breaking..
Features
- Hose Clamp Size 30Pcs Mini Fuel Injection Clamps are packed in a strong box. 2 different sizes-13-15mm, 14-16mm.
- 304 Stainless Steel Material All the hose clamps are made of high quality 304 stainless steel,(Includes screws and nuts) they have superior rust resistance and the excellent of oxidation resistance in a humid environment. They also strong and durable when installing on the tube, you will no longer worry about them rusting and breaking.
- Will Not Break These mini fuel injection line style hose clamps are edge polished smooth to hold securely and without damaging the hoses. Excellent for sealing hoses against loss of liquid, saving your time and money on costly repairs the pipe.
- Adjustable Style All hose clamps with adjustable screws can effectively solve the problem of air or liquid leaking from the hose without worrying about deformation or falling off after tightening. Equipped with a socket wrench, so you can install and remove it at any time with the socket wrench.
- Widely Used These clamps are locking secure and tight, would work much better than standard hose clamps, This small high pressure hose clamps fit for air hose, water pipe,fuel hose,silicone hose,etc.Widely used in diesel petrol pipe, home use,auto repair,marine,plumbing,agriculture,industrial ect.
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon