Tsunoda - Buying Guide
Last Updated: 05/01/2024
Share on
Bestselling from Tsunoda on Amazon
- Tsunoda, Long Nose PLA-iers, RPP-165SC-S (6.5-inch)
- Tsunoda, KBN-150, Cable Tie Cutter (6-Inch)
- Tsunoda WP-300SC-S, Water Pump PLA-iers, Soft Resin Jaw Water Pump Pliers w/built-in-spring, 12-inch
- Tsunoda, PL-200SC-S PLA-iers, Replaceable Resin Jaw Pliers w/built-in-spring (8-inch)
- Tsunoda, DBP-200, Duck Bill Pliers 8-Inch
- Tsunoda, PL-200, Slip Joint Pliers (8-Inch)
- Tsunoda WP-250SC Water Pump PLA-iers, Resin Jaw Water Pump Pliers, 10-inch
- Tsunoda RP-200 Needle Nose Pliers (8-Inch)
- Tsunoda, PLC-200U, Hold Pliers, 8-inches
- Tsunoda, PLC-200GUS, Ultra thin Hold Pliers, 8-inches
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Tsunoda, Long Nose PLA-iers, RPP-165SC-S (6.5-inch)
Asin: B07GZNVG3N | Model: RPP-165SC-S | PartNumber: RPP-165SC-S | Ean: 4952269114157
Light Weight Only 90G (3.2Oz).
For Craft & Maintenance.
Pads Can Be Replaced W/O Screwdrivers..
Multi Shaped Serration Hold Various Targets Tightly..
Features
- Replaceable resin pads on jaws prevent scratching.
- Multi shaped serration hold various targets tightly.
- Light weight only 90g (3.2oz)
- Pads can be replaced w/o screwdrivers.
- For Craft & Maintenance
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.31 x 6.50 x 2.09 inches | Weight: 0.20 pounds
See On Amazon #2
Tsunoda, KBN-150, Cable Tie Cutter (6-Inch)
Asin: B0756YR7XX | Model: KBN-150 | PartNumber: KBN-150 | Ean: 4952269113976
Cable Tie Gripper And Flush Cut Edge Loaded..
Made In Japan.
Save Your Time Of Cable Tie Fastening Works!.
Cutting Capacity (Awg) : Soft Iron 14 / Copper 10 / Strand Copper Wire 10 / Brass 12 / Plastic 4Mm.
Features
- Cutting capacity: cable tie up to 0.31-Inch width
- Cutting capacity (AWG) : Soft iron 14 / Copper 10 / Strand copper wire 10 / Brass 12 / Plastic 4mm
- Cable tie gripper and flush cut edge loaded.
- Save your time of cable tie fastening works!
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 6.22 x 4.65 x 2.05 inches | Weight: 0.30 pounds
See On Amazon #3
Tsunoda WP-300SC-S, Water Pump PLA-iers, Soft Resin Jaw Water Pump Pliers w/built-in-spring, 12-inch
Asin: B0756KZ6WQ | Model: WP-300SC-S | PartNumber: WP-300SC-S | Ean: 4952269114027
Special Shape Pads Hold A Target Tightly..
Built In Spring Is Loaded For Self-Opening Action..
No Screws Required For Easy Replacement Of Plastic Jaws..
Holdable Range (External Diameter) : 22~70Mm (0.87~2.76 Inch).
Replaceable Plastic Jaws Prevent Scratching On Work Pieces..
Features
- 9 positions water pump pliers.
- Replaceable plastic jaws prevent scratching on work pieces.
- Special shape pads hold a target tightly.
- Holdable range (External Diameter) : 22 70mm (0.87 2.76 Inch)
- Built in spring is loaded for self-opening action.
- No screws required for easy replacement of plastic jaws.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ(Tsunoda)
Dimensions: 0.63 x 11.73 x 1.54 inches | Weight: 0.95 Pounds
See On Amazon #4
Tsunoda, PL-200SC-S PLA-iers, Replaceable Resin Jaw Pliers w/built-in-spring (8-inch)
Asin: B0756NGLNZ | Model: PL-200SC-S | PartNumber: PL-200SC-S | Ean: 4952269113990
2 Positions Slip Joint Pliers.
Replaceable Plastic Pads Prevent Scratching On Work Pieces..
Built In Spring Is Loaded.
Jaw Capacity: 0.24-1.26 Inch.
Features
- Cutting Capacity (AWG) : Soft Iron 10
- Jaw Capacity: 0.24-1.26 inch
- 2 positions slip joint pliers
- Built in spring is loaded
- Replaceable plastic pads prevent scratching on work pieces.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.47 x 8.94 x 1.34 inches | Weight: 0.51 Pounds
See On Amazon #5
Tsunoda, DBP-200, Duck Bill Pliers 8-Inch
Asin: B002RDDLH2 | Model: DBP-200 | PartNumber: DBP-200 | Ean: 4952269106053
Made In Japan.
Serrated Jaw Inside.
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.39 x 8.15 x 1.97 inches | Weight: 0.40 Pounds
See On Amazon #6
Tsunoda, PL-200, Slip Joint Pliers (8-Inch)
Asin: B002RDDLHM | Model: PL-200JIS | PartNumber: PL-200JIS | Ean: 4952269106077
2 Positions Slip Joint Pliers.
Japan Industrial Standard Certificated (Jis) ,Made In Japan.
Chrome Plated Surface.
Max Jaw Opening : 1 Inch.
Features
- Cutting Capacity (AWG) : Soft Iron 10
- Max Jaw Opening : 1 inch
- 2 positions slip joint pliers
- Chrome plated surface
- Japan Industrial Standard Certificated (JIS) ,Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.51 x 7.99 x 1.81 Inches | Weight: 0.60 Pounds
See On Amazon #7
Tsunoda WP-250SC Water Pump PLA-iers, Resin Jaw Water Pump Pliers, 10-inch
Asin: B0756N84VL | Model: WP-250SC | PartNumber: WP-250SC | Ean: 4952269114003
The Pair Of Asymmetric Pads Hold Targets Tightly With 3 Points..
Holdable Range : 7~50Mm (0.3~2.0 Inch).
Wire Cutter : Up To 10Awg Soft Iron.
Replaceable Plastic Pads Prevent Scratching On Work Pieces..
Features
- 5 positions water pump pliers, w/o spring.
- Replaceable plastic pads prevent scratching on work pieces.
- The pair of asymmetric pads hold targets tightly with 3 points.
- Wire cutter : Up to 10AWG Soft Iron
- Holdable range : 7~50mm (0.3~2.0 Inch)
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 9.84 x 0.47 x 1.42 inches | Weight: 0.67 pounds
See On Amazon #8
Tsunoda RP-200 Needle Nose Pliers (8-Inch)
Asin: B07H3QQ2YM | Model: RP-200 | PartNumber: RP-200 | Ean: 4952269103038
Made In Japan.
Features
- Cutting capacity (AWG) : Stainless 12 / Soft Iron 10 / Copper 8 / Brass 10 /Stranded copper wire 8
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.43 x 7.87 x 2.13 inches | Weight: 0.40 Pounds
See On Amazon #9
Tsunoda, PLC-200U, Hold Pliers, 8-inches
Asin: B0CJ4WKK43 | Model: PLC-200U | PartNumber: PLC-200U | Ean: 4952269106183
Number Of Adjustment Steps: 3-Stage Opening (0.7, 1.0, 1.2 Inches (18, 25, 32 Mm).
Material: Main Body/Carbon Steel For Mechanical Structures.
Usage Range: ~1.3 Inches (32 Mm).
Weight: 7.1 Oz (201 G).
Features
- Size: 7.9 inches (200 mm)
- Weight: 7.1 oz (201 g)
- Number of Adjustment Steps: 3-stage opening (0.7, 1.0, 1.2 inches (18, 25, 32 mm)
- Usage range: ~1.3 inches (32 mm)
- Material: Main body/carbon steel for mechanical structures
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ
Dimensions: 0.43 x 7.91 x 1.42 Inches | Weight: 0.44 Pounds
See On Amazon #10
Tsunoda, PLC-200GUS, Ultra thin Hold Pliers, 8-inches
Asin: B0CJ4WZXFT | Model: PLC-200GUS | PartNumber: PLC-200GUS | Ean: 4952269106190
Number Of Adjustment Steps: 3-Stage Opening (0.7, 1.0, 1.2 Inches (18, 25, 32 Mm).
Material: Main Body/Carbon Steel For Mechanical Structures.
Usage Range: ~1.3 Inches (32 Mm).
Weight: 8.1 Oz (231 G).
Features
- Size: 7.9 inches (200 mm)
- Weight: 8.1 oz (231 g)
- Number of Adjustment Steps: 3-stage opening (0.7, 1.0, 1.2 inches (18, 25, 32 mm)
- Usage range: ~1.3 inches (32 mm)
- Material: Main body/carbon steel for mechanical structures
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ
Dimensions: 0.43 x 8.31 x 1.42 inches | Weight: 0.51 pounds
See On Amazon #11
SC-PL-200 Tsunoda, PLA-iers Replacement for 8-Inch Slip Joint Pliers, 2 pairs
Asin: B0756NCC4H | Model: SC-PL-200 2セットイリ | PartNumber: SC-PL-200 2セットイリ | Ean: 4952269114041
No Screws Required To Replace Pads..
Features
- Spare jaws for Tsunoda 8" PLA-iers (PL-200SC-S). 2 pairs inside.
- No screws required to replace pads.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
See On Amazon #12
Tsunoda PLC-200GUB, Ultra Thin hold Pliers, Slip Joint pliers, 8-inches
Asin: B0CJ4VWX7Y | Model: PLC-200GUB | PartNumber: PLC-200GUB | Ean: 4952269106206
Number Of Adjustment Steps: 3-Stage Opening (0.7, 1.0, 1.2 Inches (18, 25, 32 Mm).
Material: Main Body/Carbon Steel For Mechanical Structures.
Usage Range: ~1.3 Inches (32 Mm).
Weight: 8.1 Oz (231 G).
Features
- Size: 7.9 inches (200 mm)
- Weight: 8.1 oz (231 g)
- Number of Adjustment Steps: 3-stage opening (0.7, 1.0, 1.2 inches (18, 25, 32 mm)
- Usage range: ~1.3 inches (32 mm)
- Material: Main body/carbon steel for mechanical structures
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ
Dimensions: 0.43 x 8.31 x 1.42 Inches | Weight: 0.51 Pounds
See On Amazon #13
SC-PL-150 Tsunoda, PLA-iers Replacement for 6-Inch Slip Joint Pliers, 2 pairs
Asin: B0756KX1V2 | Model: SC-PL-150 2セットイリ | PartNumber: SC-PL-150 2セットイリ | Ean: 4952269114034
No Screws Required To Replace Pads..
Features
- Spare jaws for Tsunoda 6" PLA-iers (PL-150SC-S). 2 pairs inside.
- No screws required to replace pads.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
See On Amazon #14
Tsunoda FR-150, Bent Nose Pliers, Chrome Plated, 6-Inch.
Asin: B002RDDLCC | Model: FR-150 | PartNumber: FR-150 | Ean: 4952269103076
Nickel Chrome Plated Surface..
Made In Japan.
Cutting Capacity (Awg) : Stainless 14 / Soft Iron 12 / Copper 10 / Brass 12 /Stranded Copper Wire 10.
Features
- Bent type long nose pliers.
- Cutting capacity (AWG) : Stainless 14 / Soft Iron 12 / Copper 10 / Brass 12 /Stranded copper wire 10
- Nickel chrome plated surface.
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 7.36 x 0.39 x 2.05 inches | Weight: 0.28 Pounds
See On Amazon #15
Tsunoda KRP-150 Multi Purpose Long Nose Pliers (6-Inch)
Asin: B002RDDLC2 | Model: KRP-150 | PartNumber: KRP-150 | Ean: 4952269103069
Stripping Hole (Φ1.5Mm).
Made In Japan.
Crimper / Oval Sarrated Jaw / Cutting Blade.
Long Nose Pliers With Multi Functions..
Features
- Cutting capacity (AWG): Stainless 14 / Soft iron 12 / Copper 10 / Brass 12 / Strand copper wire 10
- Long nose pliers with multi functions.
- Stripping Hole ( 1.5mm
- Crimper / Oval sarrated jaw / Cutting Blade
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.39 x 6.34 x 2.05 inches | Weight: 0.26 Pounds
See On Amazon #16
Tsunoda MEB-125, Photo Etched Parts Bender (Short-Type) 5-Inch
Asin: B01G139I4I | Model: MEB-125 | PartNumber: MEB-125 | Ean: 4952269113419
Short Type Is Especially Good For Bending The Smallest Parts..
Made In Japan.
The Finest Tip Is Also Suitable For Wire Wrapping Of Beading..
Smooth Jaw Holds Targets Without Damaging..
Features
- Smooth surface tip is suitable for treating photo etched parts.
- Smooth jaw holds targets without damaging.
- Short type is especially good for bending the smallest parts.
- The finest tip is also suitable for wire wrapping of beading.
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.79 x 6.69 x 3.15 Inches | Weight: 0.15 Pounds
See On Amazon #17
Tsunoda KT-802-1 Chain Clip Pliers, 6-Inch (Normal)
Asin: B002CZOZQQ | Model: KT-802-1 | PartNumber: KT-802-1 | Ean: 4952269110968
Usable Range:Vehicle Chain 410-630 / Industrial Machinery Chains #35-60 / E-Type Circlip 3-5.
Made In Japan.
Grooves Are On Both Of Tip And Side Of Jaw, So Chains In Narrow Places Also Can Be Easily Removed..
Features
- For attaching and detaching chain with spring clip link (retainer)
- Grooves are on both of tip and side of jaw, so chains in narrow places also can be easily removed.
- Usable range:Vehicle Chain 410-630 / Industrial machinery chains #35-60 / E-type Circlip 3-5
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.79 x 8.27 x 3.15 Inches | Weight: 0.33 Pounds
See On Amazon #18
TSUNODA, WP-200SC-S, Soft Resin Jaw Water Pump Pliers, 8-inch
Asin: B08F9PTD7H | Model: WP-200SC-S | PartNumber: WP-200SC-S | Ean: 4952269114874
Wire Cutter : Up To 12Awg Soft Iron.
The Pair Of Asymmetric Pads Hold Targets Tightly With 3 Points.
Holdable Range : 7~50Mm (0.3~2.0 Inch).
5 Positions Water Pump Pliers, W/ Built-In Spring.
Features
- Replaceable soft resin jaw to prevent marring or scratching on workpiece
- 5 positions water pump pliers, w/ built-in spring
- Wire cutter : Up to 12AWG Soft Iron
- Holdable range : 7~50mm (0.3~2.0 Inch)
- The pair of asymmetric pads hold targets tightly with 3 points
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.10 x 7.95 x 1.77 inches | Weight: 0.53 pounds
See On Amazon #19
Tsunoda CA-22 Cable Cutter (6-Inch)
Asin: B002RDDLLI | Model: CA-22 | PartNumber: CA-22 | Ean: 4952269108019, 0757059310030 | UPC: 757059310030
Double Edge Type..
Made In Japan..
Tip Edge Is Suitable For Cutting Cables Inside Of Narrow Space Like A Switchboard Box..
Exclusive Use For Cutting Copper Core Cables..
Features
- Up to 4 AWG (22mmsq) Copper Cable
- Exclusive use for cutting copper core cables.
- Double edge type.
- Tip edge is suitable for cutting cables inside of narrow space like a switchboard box.
- Made in Japan.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 6.38 x 0.39 x 1.85 inches | Weight: 0.31 pounds
See On Amazon #20
Tsunoda PM-120 Precision Diagonal Cutting Pliers, 5-Inch
Asin: B000AQQFFS | Model: PM-120 | PartNumber: PM-120 | Ean: 4952269402056
Slender And Thinner Head Reaches Targets Inside Narrow Space..
Made In Japan..
W/ Coil Spring For Self Opening Action.
Sharp Edge And Pointed Tip Provide High Performance For Precise Clear Cutting..
Features
- Cutting Capacity AWG : Soft Iron 14 / Copper 12 / Brass 14 / Stainless 20 / Stranded Copper Wire 12
- Sharp edge and pointed tip provide high performance for precise clear cutting.
- Slender and thinner head reaches targets inside narrow space.
- w/ Coil Spring for self opening action
- Made in Japan.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ(Tsunoda)
Dimensions: 0.30 x 4.90 x 2.00 inches | Weight: 0.13 pounds
See On Amazon #21
Tsunoda SNP-150 Sharp Nose Pliers
Asin: B002RDDLCW | Model: SNP-150 | PartNumber: SNP-150 | Ean: 4952269103090
Cutting Capacity (Awg) : Stainless 18 / Soft Iron 12 / Copper 10 / Brass 12.
Made In Japan..
Extreme Sharp Nose Is Also Suitable For Works Inside Narrow Area..
Features
- Best for maintenance of CO welding torch.
- Extreme sharp nose is also suitable for works inside narrow area.
- Cutting Capacity (AWG) : Stainless 18 / Soft Iron 12 / Copper 10 / Brass 12
- Made in Japan.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.39 x 6.46 x 2.05 inches | Weight: 0.24 Pounds
See On Amazon #22
Tsunoda MN-115 Diagonal Cutting Pliers 4.5-Inch. Up to 12 AWG copper cable, Only 2.3oz
Asin: B000AQSCM2 | Model: MN-115 | PartNumber: MN-115 | Ean: 4952269402025
Suitable For Various Scene, From Hobby To Professional Work..
Made In Japan.
4.5-Inch Mini Size, Only 2.3 Oz Weight..
Cutting Capacity(Awg): Stainless 20 / Soft Iron 16 / Copper 12 / Stranded Copper Cable 8.
Features
- Cutting wires clearly with ease and clean face.
- Cutting Capacity(AWG): Stainless 20 / Soft Iron 16 / Copper 12 / Stranded copper cable 8
- Suitable for various scene, from hobby to professional work.
- 4.5-inch Mini size, only 2.3 oz weight.
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ(Tsunoda)
Dimensions: 0.31 x 4.61 x 2.01 inches | Weight: 0.14 Pounds
See On Amazon #23
Tsunoda PN-125, Diagonal Cutter for Plastics (5-Inch)
Asin: B002RDDLJA | Model: PN-125 | PartNumber: PN-125 | Ean: 4952269107012, 4589961092102
Light Weight And Sharp Edge Reduce Fatigue Of Continuous Cutting Work..
Made In Japan.
Flat Type Blade.
Exclusive Use For Cutting Resin Material..
Features
- Cutting Capacity: Plastic 5.0mm 0.2in.
- Exclusive use for Cutting resin material.
- Light weight and sharp edge reduce fatigue of continuous cutting work.
- Flat type blade
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 5.31 x 0.31 x 2.01 inches | Weight: 0.20 Pounds
See On Amazon #24
TSUNODA PW-SN200TG, Power Slant Edge Cutting Pliers, 8-inch (200mm)
Asin: B09YL8PTYD | Ean: 4952269101294
High Leverage Structure.
Made In Japan.
Comfortable Elastomer Handle Grip.
Blade Length 28Mm (1.1").
Features
- Flush Cut
- Blade length 28mm (1.1)
- High Leverage structure
- Comfortable elastomer handle grip
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Weight: 0.68 Pounds
See On Amazon #25
Tsunoda TN-120, Thin Blade Precision Cutter 5-inch Specialized for Plastic
Asin: B009FT48AA | Model: TN-120 | PartNumber: TN-120 | Ean: 4952269111101
Compact Thin Head Reaches Target Inside Narrow Space..
Exclusive Use For Plastics Up To 0.12-Inch Thick..
Made In Japan.
Specialized Design For Extremely Fine Cutting Works Of Plastics..
Features
- Sharp and precise edge is optimum for cutting plastic molding gates cleanly.
- Specialized design for extremely fine cutting works of plastics.
- Compact thin head reaches target inside narrow space.
- Made in Japan
- Exclusive use for plastics up to 0.12-Inch thick.
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 4.80 x 0.28 x 1.93 inches | Weight: 0.13 pounds
See On Amazon #26
Tsunoda CP-200 Side Cutting Pliers (8-inch)
Asin: B002RDDL8Q | Model: CP-200JIS | PartNumber: CP-200JIS | Ean: 4952269101041
Jis (Japan Industrial Standard) Certificated.
Made In Japan.
Standard Type Side Cutting (Linesman) Pliers..
Features
- Cutting capacity (AWG) : Stainless 10 / Soft Iron 8 / Copper 6 / Copper Cable 8
- Standard type side cutting (linesman) pliers.
- JIS (Japan Industrial Standard) certificated
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 8.31 x 0.57 x 2.05 inches | Weight: 0.79 Pounds
See On Amazon #27
Tsunoda SPL-200, Slim-Type Slip Joint Pliers 8-inch.
Asin: B007WOHCGM | Model: SPL-200 | PartNumber: SPL-200 | Ean: 4952269111163
Cutting Capacity : Soft Iron 10 Awg (2.6Mm).
Japan Industrial Standard Certificated, Made In Japan.
Position Of Cutting Edge Is Centerized And Can Cut Wire With Ease.
Slip Joint : 2 Positions.
Features
- Asymmetrical serrated jaws hold targets tightly.
- Slip Joint : 2 positions
- Cutting Capacity : Soft Iron 10 AWG (2.6mm)
- Position of cutting edge is centerized and can cut wire with ease
- Japan Industrial Standard Certificated, Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: Tsunoda
Dimensions: 0.47 x 8.15 x 1.73 inches | Weight: 0.57 Pounds
See On Amazon #28
TSUNODA, Long Needle Nose Pliers LRP-280 (Straight-type)
Asin: B08MT3VFSQ | Ean: 4952269114881
Thinner Body With Flush Rivet.
Reach In Narrow Area Where Your Fingers Can Not Enter.
Comfortable Non-Slip Grip For Precision Work.
Suitable Serrated Jaws To Grip, Pull Or Bend Small Workpiece.
Features
- Prevent your hand touching on sharp or hot surface
- Suitable serrated jaws to grip, pull or bend small workpiece
- Thinner Body with flush rivet
- Comfortable non-slip grip for precision work
- Reach in narrow area where your fingers can not enter
- See more on Amazon...
Brand: Tsunoda | Manufacturer: TSUNODA
Dimensions: 0.31 x 11.02 x 2.52 Inches | Weight: 0.57 Pounds
See On Amazon #29
Tsunoda MC-125, Mini Cutter 5-Inch
Asin: B000AQMK1G | Model: MC-125 | PartNumber: MC-125 | Ean: 4952269405088
Thin And Narrow Head Is Suitable For Fine Works Like Electronics Or Miniature Making..
Made In Japan.
With Spring.
For Plastic And Thin Wire..
Features
- Cutting capacity (AWG) : Copper 16 / Aluminium 12 / Strand copper wire 14
- For plastic and thin wire.
- Thin and narrow head is suitable for fine works like electronics or miniature making.
- With Spring
- Made in Japan
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ(Tsunoda)
Dimensions: 0.30 x 5.00 x 1.70 inches | Weight: 0.09 pounds
See On Amazon #30
Tsunoda, TH-125NC, Cutting Pliers w/Lead Catcher (5-Inch)
Asin: B073V2X71S | Model: TH-125NC | PartNumber: TH-125NC | Ean: 4952269113600
For Assembling And Repairing Electronic Devices..
Flush Cut Type.
2 Pair Of Spare Pads Inside..
Resin Pads On The Edge Can Hold Finest Lines Even Such As Hair..
Features
- Cutting capacity : Plastic 0.08-inch / Strand Copper Wire AWG 14
- Resin pads on the edge can hold finest lines even such as hair.
- For assembling and repairing electronic devices.
- 2 pair of spare pads inside.
- Flush cut type
- See more on Amazon...
Brand: Tsunoda | Manufacturer: ツノダ(Tsunoda)
Dimensions: 5.08 x 0.55 x 2.05 inches | Weight: 0.17 Pounds
See On Amazon