TuhooMall - Buying Guide

Bestselling from TuhooMall on Amazon

1. Spark Plug Protect Boot 1600 Degree Heat Shield Thermal Protection Insulator Sleeve Spark Plug Wire ...
2. 8Pcs 1200 Degree Spark Plug Wire Boots Heat Shield Protector Sleeve Cover Compatible with SBC BBC 35...
3. 8Pcs 1200 Degree Spark Plug Wire Boots Heat Shield Protector Sleeve Cover Compatible with SBC BBC 35...
4. TuhooMall 4AN Fuel Line Hose 10FT Nylon Braided Fuel Line Hose with Stainless Steel Mesh Reinforce B...
5. TuhooMall 10Feet NBR Fuel Line Hose 3/8 Inch ID for Fuel Systems Engines Tube Hose
6. TuhooMall Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion
7. TuhooMall Universal Spark Plug Gap Tool for Most 10mm 12mm 14mm 16mm Spark Plugs
8. TuhooMall 6.7 Powerstroke Fuel Filter Element for Ford 6.7 F250 F350 Super Duty 2017 2018 2019 2020 ...
9. TuhooMall 6AN 90 Degree PTFE Hose End Fitting for PTFE Fuel Hose Line Only Black
10. TuhooMall 10AN 90 Degree Swivel Hose End Fitting for Nylon or Steel Braided Fuel Hose Line Black

Features

• Universal fit for most angled & straight boots
• Protect spark plug boots and spark plug wires from Excessive Engine and Exhaust Heat
• Easy installation, just slip on (ewn end over spark plug) for maximum protection
• 8pcs spark plug boot protector, Made from fiberglass material, protect from heat up tp 1600 degrees fahrenheit
• Extends lifetime of wire & boots, non-flammable & protects against chemicals & resists water
• See more on Amazon...

Features

• Compatible This universal spark plug boot protector can fit most angled and straight boots.Fits For most hot rods and classics engine including GM Chevy , GMC, OLDS, Cadillac, Pontiac, Buick, Ford, Chrysler, Dodge, Plymouth,such as 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines.
• Function Spark Plug Wire Boot Sleeves look great, helps reduce misfires,Resists damaging chemicals, extends life of wire & boots.non-flammable & protects against chemicals & resists water, Protect spark plug boots and spark plug wires from Excessive Engine and Exhaust Heat.
• Flexible Each Boot Is 6inch Length,Spark plug wire boots will work with 90 Degree, 45 Degree, And Straight Spark Plug Boots.Length:6(15.5cm) ID:1(25mm)
• Easy Installation Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Spark Plug Sleeves Can Withstand Heat Up To 1200 Degrees Fahrenhett (648.89 C).Spark plug boot heat socks, protect your spark plug wire set s performance and increase their lifetime.
• Compatibility Set of 8 spark plug boot protector, Made From Double Wall Braided Fiberglass Sleeving, keep your spark wire and spark plug cooler in a high temperature environment,Constructed with double layered,they create an effective non-flammable thermal barrier that will extend the life of your ignition wires.
• See more on Amazon...

Features

• Compatible This universal spark plug boot protector can fit most angled and straight boots.Fits For most hot rods and classics engine including GM Chevy , GMC, OLDS, Cadillac, Pontiac, Buick, Ford, Chrysler, Dodge, Plymouth,such as 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines.
• Function Spark Plug Wire Boot Sleeves look great, helps reduce misfires,Resists damaging chemicals, extends life of wire & boots.non-flammable & protects against chemicals & resists water, Protect spark plug boots and spark plug wires from Excessive Engine and Exhaust Heat.
• Flexible Each Boot Is 6inch Length,Spark plug wire boots will work with 90 Degree, 45 Degree, And Straight Spark Plug Boots.Length:6(15.5cm) ID:1(25mm)
• Easy Installation Just Slip On (Sewn End Over Spark Plug ) For Maximum Protection ,Spark Plug Sleeves Can Withstand Heat Up To 1200 Degrees Fahrenhett (648.89 C).Spark plug boot heat socks, protect your spark plug wire set s performance and increase their lifetime.
• Compatibility Set of 8 spark plug boot protector, Made From Double Wall Braided Fiberglass Sleeving, keep your spark wire and spark plug cooler in a high temperature environment,Constructed with double layered,they create an effective non-flammable thermal barrier that will extend the life of your ignition wires.
• See more on Amazon...

Features

• Specifications Inside Diameter: 0.22". Outside Diameter: 0.45inch. Length: 10 Feet. Please measure before purchase!
• Application Nylon braided fuel line is widely used as a transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, and engine cooler line.
• Material Nylon braided surface and stainless steel mesh reinforced middle layer provide strong toughness. The CPE synthetic rubber in the inner layer provides strong oil resistance and flame retardancy.
• Note Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40 to 250 .
• Use Scope You could use it for your car, motorcycle, boat, mower, and all kinds of automotive, just need to choose the right size of your machine.
• See more on Amazon...

Features

• Specifications Inside Diameter:0.37". Outside Diameter:0.6". Length:10 Feet. Please make sure the size is correct before purchase.
• Material The Fuel Line Hose is made of NBR(nitrile-butadiene rubber) and has good oil resistance. The woven net of fiber material is added in the middle to increase the toughness of the product.
• Note Working Pressure: 290psi. Bursting Pressure: 800psi. Temperature Range: -40 to 248 .
• Application The fuel line hose is widely used in the fuel system, oil cooling system, PCV system, and steam emission. Please check the working pressure before purchasing.
• Applicable Medium This Fuel line hose can work with diesel, biodiesel, gasoline, oil, automobile coolant, grease, water, air, etc.
• See more on Amazon...

Features

• Work Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely.
• Function : The fuel filter regulator with 6AN adapter fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10-micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life.
• Installation : The fuel filter regulator kit Compatible With LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make it easy to obtain even more uniform fuel pressure. A mounting bracket and rubber insulator are included to make installation a breeze.
• Compatible The fuel filter pressure regulator is compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please check the part is what you need before purchase.
• Included Components 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet.
• See more on Amazon...

Features

• Function This spark plug gap tool can simply and accurately adjust the gap of a spark plug. Just put the spark plug into the tool and pad a suitable feeler gauge as needed. Rotating the handle you can perfectly adjust the gap of the spark plug.
• Extensive Use This spark plug gap adjustment tool is universal for 10mm 12mm 14mm 16mm Spark Plugs. Used your desired size feeler gauge for gap thickness.
• Note Some spark plugs electrode will spring back - this is normal for some spark plugs.If your gap target is 0.44mm we suggest to use 0.42mm this way when it spring back you will get it to 0.44mm.
• Installation 1. Simply place your spark plug into the gap tool.2. Use your desired size feeler gauge for gap thickness.3. Turn the knob with the feeler gauge in place till the side electrode compresses to the desired gap thickness.
• Included Components spark plug gap tool*1 & feeler gauge*1
• See more on Amazon...

Features

• Function Premium quality fuel filter kit could remove 99.8% of particles 5 microns or larger. Helps prevent stalling, poor starting, and potential engine failure.
• Included Components The fuel filter kit include frame rail, engine mounted elements and a return fuel line clip.
• Compatible Replaces Part Numbers:FD-4624, FD-4625, FD-4625AA, Ford HC3Z-9N184-B, Ford HC3Z-9N184-C, Ford HC3Z-9N184-J.
• Applicable Vehicle 2017 2018 2019 2020 Ford F-250 Super Duty | 2017 2018 2019 2020 Ford F-350 Super Duty.
• Feature The fuel filter is made of high-quality plastic. Our fuel filters are designed and manufactured according to OEM, are better quality than the original equipment, and can perfectly replace the old diesel filter. And have passed the original car installation test.
• See more on Amazon...

Features

• Size 6AN female thread: 9/16-18 UNF for only PTFE Fuel Hose Line(Hose ID: 0.31 inch OD: 0.43-0.47 inch).
• Material Made of aluminum alloy. A polished and anodized surface provides a bright appearance and corrosion protection.
• Operating Parameters Max pressure: 3000PSI. Temperature range: -75 to 440 .
• Environment Protection If you don't want to use it, you can take it down and recycle it. It is made of high-quality materials, so it can be recycled and reused for a long time.
• Application Usually used for Oil/ Fuel/ Water/ Fluid/ Airline etc. Connect engine transmission oil cooler, engine, air filtration system, and engine and cooling system. Only suitable for PTFE Fuel Hose Line. (Not compatible with CPE hose or Rubber hose.)
• See more on Amazon...

Features

• Size 10AN female thread: 7/8-14 UNF for only Nylon or Steel Braided Fuel Hose Line
• Material Made of aluminum alloy. A polished and anodized surface provides a bright appearance and corrosion protection.
• Operating Parameters Max pressure: 1000PSI. Temperature range: -65 to 250 .
• Environment Protection If you don't want to use it, you can take it down and recycle it. It is made of high-quality materials, so it can be recycled and reused for a long time.
• Application Usually used for Oil/ Fuel/ Water/ Fluid/ Airline etc. Connect engine transmission oil cooler, engine, air filtration system, and engine and cooling system. Only suitable for Nylon or Steel Braided Fuel Hose Line. (Not compatible with PTFE hose,Rubber hose.)
• See more on Amazon...

Features

• Size 6AN female thread: 9/16-18 UNF to 3/8" barb for only Rubber Fuel Hose Line.
• Material Made of aluminum alloy. A polished and anodized surface provides a bright appearance and corrosion protection.
• Operating Parameters Max pressure: 2000PSI. Temperature range: -40 to 248 .
• Environment Protection If you don't want to use it, you can take it down and recycle it. It is made of high-quality materials, so it can be recycled and reused for a long time.
• Application Usually used for Oil/ Fuel/ Water/ Fluid/ Airline etc. Connect engine transmission oil cooler, engine, air filtration system, and engine and cooling system. Only suitable for rubber fuel hose. (Not compatible with PTFE hose, nylon braided hose, or stainless steel braided hose.)
• See more on Amazon...

Features

• (Copper + PVC + TINPLATE Sheath)Copper barrel ensure excellent wire contact.
• (MULTIPLE SIZES)With three different colors (red, blue, yellow) as well as a detailed chart for easy identification or for different purposes of use, ring terminals for automotive battery wiring, and other for home use.
• (WITH A TRANSPARENT BOX)All insulated electrical rings are nicely enclosed in plastic case for easy access and carry with compartments for easy store and carry.
• (WIDE USE)Wire connectors comes with all you need to make solderless electrical repairs marine speakers,marine amplifier and around the home, shop or outside.
• (KIT INCLUDE)Ring terminals wire connectors 150pcs, bullet terminal connectors 100pcs (male and female), spade connector terminals 150pcs (insulated or sami-insulated), butt splice connector 50pcs, piggy back terminals 30pcs. You will always find your desired wire terminals.
• See more on Amazon...