UCTRONICS - Buying Guide
Last Updated: 04/30/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
UCTRONICS Breadboard Alligator Clip Jumpers - Gator to Male and Female Jumper Wires Test Lead 2x10pcs 8 inch for Power Supply,LED Strips, Multimeters, Arduino Lilypad and Raspberry Pi
Asin: B07GVGGYJ7 | Model: U6046 | PartNumber: U6046
Tear It Apart To 20 Wires In 5 Different Colors If You Want, With Half Gator To Male Jumpers And Half Gator To Female..
Also Suitable For Arduino, Raspberry Pi, Orange Pi, Wearable Circuit Projects Or A Breadboard Experiment..
2.54Mm Solid Female And Male Connectors, 24Mm Alligator Clips, Pure Copper Insulated For Smooth Conductivity ..
Easily Connect A Wire To Breadboard From Power Supplies, Led Strips, Multi-Meters, Lilypad, Etc..
Features
- 8-inch jumper wire with an alligator clip on one end and male/female jumpers on the other for a breadboard project.
- Easily connect a wire to breadboard from power supplies, LED strips, multi-meters, Lilypad, etc.
- Tear it apart to 20 wires in 5 different colors if you want, with half gator to male jumpers and half gator to female.
- 2.54mm solid female and male connectors, 24mm alligator clips, pure copper insulated for smooth conductivity .
- Also suitable for Arduino, Raspberry Pi, Orange pi, wearable circuit projects or a breadboard experiment.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.40 x 9.10 x 0.40 Inches
See On Amazon #2
UCTRONICS Male to Female GPIO Ribbon Cable 40pin 8inch Breadboard Jumper Wires for Connection Raspberry Pi 3 2 Model B B+ w/ 3.5/5 inch TFT Touch Screen LCD Display
Asin: B07D991KMR | Model: U6033 | PartNumber: U6033
Material: High-Quantity Copper Soft Wire Material For Safe And Durable.
Application: It Can Be Used To Raspberry Pi 3 2 Model B B+ W/ 3.5/ 5 Inch Touch Tft Screen Lcd Display.
Easy Assembly:The Cables Can Be Separated To Form An Assembly Wires To Support Non-Standard Odd-Spaced Headers To Complete Other Tests.
Length: About 20 Cm / 8 Inch.
Features
- Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable
- Length: about 20 cm / 8 inch
- Material: High-quantity copper soft wire material for safe and durable
- Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests
- Application: It can be used to Raspberry Pi 3 2 Model B B+ w/ 3.5/ 5 inch Touch TFT Screen LCD display
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #3
UCTRONICS Electronic USB Load Tester, Adjustable Discharge Resistor Module 35W, Test and Trigger QC2.0 QC3.0 AFC 9V FCP, Intelligent Temperature Control with Cooling Fan
Asin: B07SPJFJFJ
Rated Operational Voltage: Dc 4.0-25.0V; Max Discharging Power: 35W; Rated Operational Current: 0.03-5.00A.
Applications: Electronic Load; Test Charger, Charging Cable, Power Bank And Other Device; Equipment Aging Test..
Safe Protection: Anti-Reverse Protection, Overvoltage Protection (Ovp), Overcurrent Protection (Ocp), Over-Power Protection (Opp), Low-Voltage Protection (Lvp), Over-Temperature Protection (Otp)..
Connection Ports: Usb, Micro Usb, Type C And External Wiring Port..
Features
- Multifunction: Not only an electronic load, but also can test the QC2.0/QC3.0/AFC/FCP fast charge protocol, trigger output 5v/9v/12v/20v
- Connection Ports: USB, Micro USB, Type C and external wiring port.
- Rated Operational Voltage: DC 4.0-25.0V; Max discharging power: 35W; Rated operational current: 0.03-5.00A
- Safe Protection: anti-reverse protection, overvoltage protection (OVP), overcurrent protection (OCP), over-power protection (OPP), low-voltage protection (LVP), over-temperature protection (OTP).
- Applications: electronic load; test charger, charging cable, power bank and other device; equipment aging test.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #4
UCTRONICS 0-167 F Fahrenheit Digital Temperature Meter Blue LED Display MF55 Type NTC Thermistor Temp Sensor 2-Wires Reverse Polarity Protection with Black Case
Asin: B01L1DLPWG | Model: U4016 | PartNumber: U4016
Temperature Measuring Range: 0-167°F Fahrenheit..
Operating Voltage: 4.5-28V. Wiring Is Simple, Then The Red Is For Positive, And Black For Negative.
Temperature Sensor Using Mf55 Type Of Ntc Thermistor, Epoxy Potting, Can Be Used In Water, Note: The Water Temperature Should Not Exceed 167 ° F.
It Is Design With Reverse Polarity Protection, Positive And Negative Reversed Will Not Burn, But The Screen Is Blank.
Features
- This 0-167 F Fahrenheit Digital Temperature Meter is easy to setup and read
- It is design with reverse polarity protection, positive and negative reversed will not burn, but the screen is blank
- Temperature measuring range: 0-167 F Fahrenheit.
- Temperature sensor using MF55 type of NTC thermistor, epoxy potting, can be used in water, NOTE: the water temperature should not exceed 167 F
- Operating voltage: 4.5-28V. Wiring is simple, then the red is for positive, and black for negative
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #5
UCTRONICS -30-800 Degree Centigrade Digital Temperature Meter Blue LED Display K-Type Thermocouple Temp Sensor 2-Wires Reverse Polarity Protection with Black Case
Asin: B01IGUGO1E | Model: COMINHKPR125520 | PartNumber: COMINHKPR125520
Temperature Measuring Range: -30-800 Degree Centigrade. If The Temperature Is Within 100 Degree, The Display Format Is With 1 Decimal. If The Temperature Is Over 100 Degree, The Display Format Is With Integer.
Include K-Type Temperature Probe.
Wiring Is Simple, Then The Red Is For Positive, And Black For Negative.
It Is Design With Reverse Polarity Protection, Positive And Negative Reversed Will Not Burn, But The Screen Display Nothing.
Features
- This -30-800 degree Centigrade Digital Temperature Meter is easy to setup and read, maximum humidity: 90% -100% (use in the no condensation environment)
- It is design with reverse polarity protection, positive and negative reversed will not burn, but the screen display nothing
- Temperature measuring range: -30-800 degree centigrade. If the temperature is within 100 degree, the display format is with 1 decimal. If the temperature is over 100 degree, the display format is with integer
- Wiring is simple, then the red is for positive, and black for negative
- Include K-type temperature probe
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.07 Pounds
See On Amazon #6
UCTRONICS DC 10V 0/4-20mA Current Voltage Signal Generator, USB Power Supply Interface Analog Simulator for PLC and Panel Debugging, Device Testing, Frequency Converter, Flow Valve
Asin: B07L491RLM
Current Output: 0-22Ma, Precision Is 0.01Ma, Rotate The Encoder Knob To Adjust Output Current, Can Be Calibrated..
Product Dimension: 3.94” X 2.36” X 0.79” (100Mm X 60Mm X 20Mm), Portable And Convenient..
Battery Model: Dc 3.7V 1000Mah 803040.
Multiple Display: Just Push The Small Botton To Switch The Display Mode Between Voltage And Current, You Can Also Follow The Instructions To Switch 0-100 Percent Or 0-50Hz Display..
Voltage Output: Dc ±10V, Precision Is 0.01V, Rotate The Encoder Knob To Adjust Output Voltage, Can Be Calibrated..
Features
- Power Supply: external connection micro USB-5V or external power DC 15-30V, each way makes the generator work, both ways also can be connected at the same time. Battery is not included.
- Voltage Output: DC 10V, precision is 0.01V, rotate the encoder knob to adjust output voltage, can be calibrated.
- Current Output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output current, can be calibrated.
- Multiple display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.
- Product Dimension: 3.94 x 2.36 x 0.79 (100mm x 60mm x 20mm), portable and convenient.
- Battery model: DC 3.7V 1000mAh 803040
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.20 Pounds
See On Amazon #7
UCTRONICS Numerical Control DC 6-55V to 0-50V 5A Step Down Stabilized Power Supply Constant Voltage Current Buck Power Converter Power Supply Adjustable Module
Asin: B01LWXAC5E | Model: U5168 | PartNumber: U5168
The 1.44 In Colorful Lcd Monitor Can Display The Preset Voltage, Input Voltage, Output Voltage, The Preset Current, Output Current, Output Power At The Same Time. On The Output State Remind Area, You Can Monitor That The Key Is Locked Or Not, Output Is Normal Or Not, The State Of Constant Voltage And Constant Current, The Current Data Set Prompt And Output Opens Or Not.
Note: When The Output Of This Step Down Voltage Regulator Is Used For Charging A Battery Or Connect A Capacitive Load, There Must Be A Diode In Series With The Output-Anode, Otherwise The Regulator Will Be Damaged..
There Are Four Button-"M1", "M2", "Set" And "On/Off", And A Coding Potentiometer. Can Be Used For To Set The Output Voltage And Output Current On The Main Display Interface, Set The Data On The Data Setting Interface, Set The Protection Value, Adjust The Brightness Of Screen, Extract Shortcut Storage Data Group M1 Or M2, Etc..
This Step Down Voltage Regulator Can Store M0-M9 10 Groups Preset Value When Power-Down. Keep Pressing M1 Or M2 More Than 2S, The Corresponding Data Group Will Be Extracted And Displayed On The Right Of The Screen.
Features
- UCTRONICS Variable Bench Power Supply DSP5005 - Buck Converter DC 6-55V to 0-50V 5A Precision Digital Adjustable Step Down - Constant Voltage and Current, 10 Preset Settings Switchable: This power supply combines digital control with analog integration. Its output range: Voltage is 0-50.00V, step by 0.01V; Current is 0-5.000A, step by 0.001A
- This step down voltage regulator can store M0-M9 10 groups preset value when power-down. Keep pressing M1 or M2 more than 2s, the corresponding data group will be extracted and displayed on the right of the screen
- The 1.44 in colorful LCD monitor can display the preset voltage, input voltage, output voltage, the preset current, output current, output power at the same time. On the output state remind area, you can monitor that the key is locked or not, output is normal or not, the state of constant voltage and constant current, the current data set prompt and output opens or not
- There are four button-M1, M2, SET and ON/OFF, and a coding potentiometer. Can be used for to set the output voltage and output current on the main display interface, set the data on the data setting interface, set the protection value, adjust the brightness of screen, extract Shortcut storage data group M1 or M2, etc.
- Note: When the output of this step down voltage regulator is used for charging a battery or connect a capacitive load, there must be a diode in series with the output-anode, otherwise the regulator will be damaged.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.69 x 3.11 x 1.89 inches | Weight: 0.04 Pounds
See On Amazon #8
UCTRONICS for Raspberry Pi Camera Cable, Ribbon Flat FFC Camera Cable for Raspberry Pi 15pin 1.0mm Pitch 200cm 6.56ft (Pack of 2)
Asin: B072HVZYHF | Model: U3848 | PartNumber: U3848
Each Order Comes With Two Cables, The Raspberry Pi And Pi Camera Shown In The Picture Are Not Included (But We Have Pi Camera In The Shop).
Also Applicable For Lcd, Lcd Tv, Car Navigation, Car Audio, Laptop, Pc, Dvd Player, Recorder, Printer, Copy Machine, Etc..
This Ffc Cable Is Perfectly Compatible For Raspberry Pi Camera Board (Both 'Classic' And 'Noir' Type).
The Cable Usually Consists Of A Flat And Flexible Plastic Film Base, With Multiple Metallic Conductors Bonded To One Surface.
Features
- This UCTRONICS for Raspberry Pi Camera Cable is specially designed for swap out the stock 150mm long flex cable from a Raspberry Pi Camera for 200cm (6.56ft)
- The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface
- Each order comes with two cables, the Raspberry Pi and Pi Camera shown in the picture are not included (but we have Pi camera in the shop)
- This FFC cable is perfectly compatible for Raspberry Pi Camera Board (both 'classic' and 'NoIR' type)
- Also applicable for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.39 x 1.97 x 1.97 inches
See On Amazon #9
UCTRONICS PoE+ Hat for Raspberry Pi, 5V 4.5A Power Over Ethernet with Cooling Fan for Raspberry Pi 4B/3B+
Asin: B0CXDBBC4L
Efficient Heat Dissipation: This Uctronics For Raspberry Pi 4 Poe Hat Is Equipped With A Brushless Fan, And An Aluminum Heatsink For Effectively Dissipating Heat.
Easy Set-Up: Simply Connect The Pse(Power Sourcing Equipment) And Enjoy The Convenience Of A Single Cable To Power And Data For Raspberry Pi.
Compact Layout And Small Size: Suitable For Most Cases, Also Compatible With Uctronics Pi Rack Mount.
Poe+ Hat: This Poe Hat Is Fully Isolated Switch Mode Power Supply (Smps), Maximum Output Power Of 5V 4.5A. Input: 45-57V Ieee 802.3Af/At Complaint, Class 4 Poe Device.
Features
- Power over Ethernet: This PoE+ hat is designed for the Raspberry Pi 4B/3B+ to meet increased power requirements
- PoE+ hat: This PoE hat is fully isolated switch mode power supply (SMPS), maximum output power of 5V 4.5A. Input: 45-57V IEEE 802.3af/at Complaint, Class 4 PoE device
- Efficient Heat Dissipation: This UCTRONICS for Raspberry Pi 4 PoE hat is equipped with a brushless fan, and an aluminum heatsink for effectively dissipating heat
- Compact layout and small size: Suitable for most cases, also compatible with uctronics pi rack mount
- Easy Set-up: Simply connect the PSE(power sourcing equipment) and enjoy the convenience of a single cable to power and data for Raspberry Pi
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 months
See On Amazon #10
UCTRONICS High Precision Handheld LC Inductor Capacitor Tester, Inductive Capacitance Meter Kit, 1pF-100mF, 1uH-100H
Asin: B0856RCWBJ | Model: U6228 | PartNumber: U6228
High Precision: Accuracy 1% Of Capacitance Range 1Pf~1Uf, 5% Of Range 1Uf~100Mf; 1% Of Inductance Range 1Uh~1H, 5% Of Range 1H~100H.
Applications: This Portable And Handheld Tester 1×Handheld Lc Meter, 1 Pair Of Alligator Clip Test Leads, 1×Lcr Kelvin Alligator Clip Test Lead, 1×Mini Usb Cable, 1×Manual.
Easy To Calibrate: Just Press The Button "Zero" To Calibrate, Open Circuit Calibration In Capacitance Measuring Mode, Short Circuit Calibration In Inductance Measuring Mode..
Measuring Range: Capacitance 0.01Pf-100Mf, Inductance 0.001Uh-100H, Frequency 500Khz/500Hz-50Khz..
Features
- Power Supply: The meter can be powered by included 5 DC power supply cable and mini USB cable. You can also install 4 AA batteries. Each way makes the meter work. Note: the AA battery is not included.
- Measuring Range: Capacitance 0.01pF-100mF, inductance 0.001uH-100H, frequency 500KHz/500Hz-50KHz.
- High Precision: Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF; 1% of inductance range 1uH~1H, 5% of range 1H~100H
- Easy to Calibrate: just press the button ZERO to calibrate, open circuit calibration in capacitance measuring mode, short circuit calibration in inductance measuring mode.
- Applications: This portable and handheld tester 1 handheld LC meter, 1 pair of alligator clip test leads, 1 LCR Kelvin alligator clip test lead, 1 mini USB cable, 1 manual
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #11
UCTRONICS DC 9V 12V 24V 36V 5A Variable Voltage Power Supply 6-36V to 0.6-36V Adjustable Buck Boost Converter, Portable Bench Constant Voltage Current Stabilized Regulator Module
Asin: B0861LGM15 | Model: U6229 | PartNumber: U6229
Multifunction: You Can Flip Or Rotate The Display On This Power Supply Unit, Change The Color Of The Background And Parameters And Switch The Day/Night Display Mode..
High Precision: Current Accuracy, ±(0.4%+3 Digits), Increment Of 0.001A; Voltage Accuracy, ±(0.3%+1 Digits), Increment Of 0.01V.
More Effective Cooling Scheme: This Module Built In An Intelligent Temperature-Controlled Fan, Temperature Trigger: 50℃..
Multi-Display: 5 Diaplay Pages, Input/Out Voltage(V), Current (A), Temperature (T), Power (W), Electric Capacity (Ah), Electric Quantity (Wh), Running Time, Voltage And Current Graph, System And Power Parameters..
Features
- Input Voltage: DC 6V-36.0V; Output Voltage: DC 0.6V-36.0V; Output Current: 0-5.0A; Output Power: 80W
- Multi-Display: 5 diaplay pages, input/out voltage(V), current (A), temperature (T), power (W), electric capacity (AH), electric quantity (WH), running time, voltage and current graph, system and power parameters.
- Multifunction: You can flip or rotate the display on this power supply unit, change the color of the background and parameters and switch the day/night display mode.
- More Effective Cooling Scheme: This module built in an intelligent temperature-controlled fan, temperature trigger: 50 .
- High Precision: Current accuracy, (0.4%+3 digits), increment of 0.001A; Voltage accuracy, (0.3%+1 digits), increment of 0.01V
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.25 Pounds
See On Amazon #12
UCTRONICS PoE+ Hat for Raspberry Pi, 5V 4.5A Max IEEE802.3af/at Complaint Power Over Ethernet with Cooling Fan for Raspberry Pi 4B/3B+
Asin: B0CBBC4DYT
Efficient Heat Dissipation: This Uctronics For Raspberry Pi 4 Poe Hat Is Equipped With A Brushless Fan, And An Aluminum Heatsink For Effectively Dissipating Heat.
Easy Set-Up: Simply Connect The Pse(Power Sourcing Equipment) And Enjoy The Convenience Of A Single Cable To Power And Data For Raspberry Pi.
Compact Layout And Small Size: Suitable For Most Cases, Also Compatible With Uctronics Pi Rack Mount.
Poe+ Hat: This Poe Hat Is Fully Isolated Switch Mode Power Supply (Smps), Maximum Output Power Of 5V 4.5A. Input: 45-57V Ieee 802.3Af/At Complaint, Class 4 Poe Device.
Features
- Power over Ethernet: This PoE+ hat is designed for the Raspberry Pi 4B/3B+ to meet increased power requirements
- PoE+ hat: This PoE hat is fully isolated switch mode power supply (SMPS), maximum output power of 5V 4.5A. Input: 45-57V IEEE 802.3af/at Complaint, Class 4 PoE device
- Efficient Heat Dissipation: This UCTRONICS for Raspberry Pi 4 PoE hat is equipped with a brushless fan, and an aluminum heatsink for effectively dissipating heat
- Compact layout and small size: Suitable for most cases, also compatible with uctronics pi rack mount
- Easy Set-up: Simply connect the PSE(power sourcing equipment) and enjoy the convenience of a single cable to power and data for Raspberry Pi
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #13
UCTRONICS Christmas Light Fuses 15 Values 150pcs Fast-Blow Glass Fuses Assorted Kit 6x30mm 250V 0.5 1 2 3 5 8 10 15 20 30A 5x20mm 1 5 10 15 20A Tube Fuses with Plastic Box
Asin: B07BT5SLM4
Size: About 5X20mm And 6X30mm.
Those Glass Fuses Are Packaged In A Clear Plastic Box For Keeping Different Ampere Values Separated And Easy To Access.
Voltage: 250V.
15 Different Ampere Values: 6X30mm 250V 0.5 1 2 3 5 8 10 15 20 30A 5X20mm 1 5 10 15 20A Tube Fuses,Each For 10Pcs.
Features
- Product Name: 15 Values 150pcs Fast-blow Glass Fuses Assorted Kit 6x30mm 250V 0.5 1 2 3 5 8 10 15 20 30A 520mm 1 5 10 15 20A Tube Fuses with Plastic Box
- 15 different Ampere values: 6x30mm 250V 0.5 1 2 3 5 8 10 15 20 30A 5x20mm 1 5 10 15 20A Tube Fuses,each for 10pcs
- Size: about 5x20mm and 6x30mm
- Voltage: 250V
- Those glass fuses are packaged in a clear plastic box for keeping different Ampere values separated and easy to access
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.44 Pounds
See On Amazon