USA Knifemaker - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
50 Quench Oil - 1 Gallon Jug
Asin: B07V3NYWV6 | Ean: 0616639501742 | UPC: 616639501742
Nickel Ball Time @ 100°F: 7 - 9 Seconds, Flash Point: > 275°F.
Note: All Shipping Will Be Via Ups Ground. No International Shipments..
Parks 50 Is Considered A Fast Oil. Many Times A Quench Oil Is Described In Seconds Quenching Using A Nickel Ball Test. The Nickel Ball Quench Time Is 7-9 Seconds..
Appearance: Light Amber Oil, Viscosity @ 100°F: > 5.8 Cst.
Features
- Typical steels to use with this quench oil formula include: W1, W2, 1095. Many other steels using fast speed (there is no hard and fast definition of fast or medium ) will be appropriate with this quench oil.
- Appearance: Light Amber Oil, Viscosity @ 100 F: > 5.8 cSt
- Nickel Ball Time @ 100 F: 7 - 9 seconds, Flash Point: > 275 F
- Parks 50 is considered a fast oil. Many times a quench oil is described in seconds quenching using a Nickel Ball test. The Nickel Ball quench time is 7-9 seconds.
- Note: All shipping will be via UPS ground. No international shipments.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 9.10 pounds
See On Amazon #2
Heat treat foil (tool wrap) 321 up to 2000F 20" wide (sold by the foot)
Asin: B085QMVWQ1 | Ean: 0616639446715 | UPC: 616639446715
This Foil Is Sold By The Foot So If You Order 10, You Will Get 10 Feet By 24" Wide.
Double Over All The Seams And Pound Them Shut With A Hammer. This Stuff Will Cut You Like A Razor! Be Careful When You Handle It.
This Tool Wrap Is .0020" Thick And Is 24" Wide. A Single Wrap Will Do. Use This Foil To Wrap Your Knives Before Heat Treating To Protect Them From Damage To Decarb Or Scale.
This Foil Is 24" Wide, Not 12" Like Most So Check The Width When Comparing Prices..
Features
- High Temp Heat Treat Foil to 2000F degrees
- This foil is 24 wide, not 12 like most so check the width when comparing prices.
- This foil is sold by the foot so if you order 10, you will get 10 feet by 24 wide
- This tool wrap is .0020 thick and is 24 wide. A single wrap will do. Use this foil to wrap your knives before heat treating to protect them from damage to decarb or scale
- Double over all the seams and pound them shut with a hammer. This stuff will cut you like a razor! Be careful when you handle it
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 2.00 Pounds
See On Amazon #3
Park's 50 Quench Oil - 2 Gallon Pail
Asin: B0B1499L72 | Ean: 0616639520453 | UPC: 616639520453
Nickel Ball Time @ 100°F: 7 - 9 Seconds, Flash Point: > 275°F.
Note: All Shipping Will Be Via Ups Ground. No International Shipments..
Parks 50 Is Considered A Fast Oil. Many Times A Quench Oil Is Described In Seconds Quenching Using A Nickel Ball Test. The Nickel Ball Quench Time Is 7-9 Seconds..
Appearance: Light Amber Oil, Viscosity @ 100°F: > 5.8 Cst.
Features
- Typical steels to use with this quench oil formula include: W1, W2, 1095. Many other steels using fast speed (there is no hard and fast definition of fast or medium ) will be appropriate with this quench oil.
- Appearance: Light Amber Oil, Viscosity @ 100 F: > 5.8 cSt
- Nickel Ball Time @ 100 F: 7 - 9 seconds, Flash Point: > 275 F
- Parks 50 is considered a fast oil. Many times a quench oil is described in seconds quenching using a Nickel Ball test. The Nickel Ball quench time is 7-9 seconds.
- Note: All shipping will be via UPS ground. No international shipments.
- See more on Amazon...
Brand: USA Knifemaker
Weight: 16.00 Pounds
See On Amazon #4
Kitchen - 8" Chef Knife - Blade Blank - Chef Maker(tm) Line
Asin: B07ZQQ61BJ | Ean: 0616639505597 | UPC: 616639505597
9Cr18mov Stainless Steel, Very Sharp Hollow Grind, Heat Treated Ready For You To Finish, Satin Finish.
Chef Maker(Tm) Pantry Style.
Made In China.
3Each 3/16" (.187") Diameter Handle Pin Holes (We Suggest Using Our Medium Corby Bolts), Handle Size 5" X 1".
Features
- Over all Length 13", Blade Length 8", Blade Thickness .120"
- 3each 3/16 (.187) diameter handle pin holes (we suggest using our medium corby bolts), Handle Size 5 x 1
- 9Cr18MoV Stainless Steel, Very Sharp Hollow Grind, Heat Treated Ready for You to Finish, Satin Finish
- Made in China
- Chef Maker(tm) Pantry Style
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 0.15 pounds
See On Amazon #5
UltreX Burlap Micarta-1.5" Blocks-Knife Handle Material (Black Small)
Asin: B0B4T3MZXZ | Ean: 0616639517156 | UPC: 616639517156
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications..
Small Block Is 1.5"X1.5"X6", Large Block Is 1.5"X2"X6".
Made In The Usa.
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Features
- Use this as a durable knife handle material
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- Made in the USA
- Small Block is 1.5x1.5x6, Large Block is 1.5x2x6
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Norplex
Weight: 1.00 Pounds
See On Amazon #6
UltreX Linen Micarta- 3/16" Scales- Knife Handle Material (Black)
Asin: B0B4T6Y6YB | Ean: 0616639521917 | UPC: 616639521917
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Scales Are 1.5"X6", Sold As A Set.
Made In The Usa.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications..
Features
- Use this as a durable knife handle material
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Made in the USA
- Scales are 1.5x6, sold as a set
- See more on Amazon...
Brand: USA Knifemaker
Weight: 0.90 Pounds
See On Amazon #7
Kitchen Knife Blade Blank - S078 7" Cleaver Knife
Asin: B07HHKYN53 | Ean: 0616639481976 | UPC: 616639481976
Made In China.
4.5" X 1.25" Handle Material Area.
Hole And Slot Size Is: .187".
5Cr15mov Stainless Steel.
Features
- 12 1/2" Overall Length, 7" Blade Length
- 5Cr15MoV Stainless Steel
- Made in China
- Hole and slot size is: .187
- 4.5 x 1.25 handle material area
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 0.40 Pounds
See On Amazon #8
Glu-Tite Greaseless Sizing Compound
Asin: B085T92Y8Z | Ean: 0616639480177 | UPC: 616639480177
It Serves As An Anchoring Size Coat Of Glue And Is Used Prior To Applying Greaseless Compound..
It Permits Forming A Thicker And Longer Lasting Abrasive Head..
It Melts Under Frictional Heat When Applied To A Revolving Buffing Wheel..
Features
- GLU-TITE is glue in a gelatin form.
- It melts under frictional heat when applied to a revolving buffing wheel.
- It serves as an anchoring size coat of glue and is used prior to applying greaseless compound.
- It permits forming a thicker and longer lasting abrasive head.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 1.80 Pounds
See On Amazon #9
Ultrex Micarta Paper- 1/8" Scales- Knife Handle Material (Black)
Asin: B0CTB5FFCR
Made In The Usa.
Scales Are 1.5"X6", Sold As A Pair.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Features
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods of Westinghouse, updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Made in the USA
- Scales are 1.5x6, sold as a pair
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Norplex
See On Amazon #10
Loctite Clover Compound - 400 Grit - Very Fine - 1/2 oz
Asin: B085T28W8K | Ean: 0616639460704 | UPC: 616639460704
1/2 Oz.
Loctite Clover Silicon Carbide Lapping Compound.
Loctite Clover Silicon Carbide Grease Mix Is A Standard Abrasive Paste For Fast Metal Removal. Produces A Smooth, Flat Surface But Not A Polished One. Leaves A Rust-Preventing Film On Lapped Surfaces..
400 Grit - Very Fine.
Features
- Silicon Carbide Grease
- 400 Grit - Very Fine
- 1/2 oz
- LOCTITE Clover Silicon Carbide Grease Mix is a standard abrasive paste for fast metal removal. Produces a smooth, flat surface but not a polished one. Leaves a rust-preventing film on lapped surfaces.
- Loctite Clover Silicon Carbide Lapping Compound
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 0.03 Pounds
See On Amazon #11
UltreX SureTouch - 3 Color Camo - Knife Handle Material (3/16" Scales)
Asin: B0B4TD2F8Q | Ean: 0616639505948 | UPC: 616639505948
Suretouch Is A Revolutionary New Patent Pending Process That Combines G-10 Layers With Rubber. It Is Now Possible To Have The Toughness And Durability Of G-10 With The Grip And Anti-Slip Properties Of Rubber All In One Material. Available In Many Of The Same Color Combinations As Ultrex G-10 You Are Sure To Find The Perfect Combination For Your Application. This Is Manufactured In The Usa..
Scales Are 1.5"X6", Sold As A Pair.
Made In Usa.
Features
- Sheet is 6"x12"
- Made in USA
- SureTouch is a revolutionary new patent pending process that combines G-10 layers with rubber. It is now possible to have the toughness and durability of G-10 with the grip and anti-slip properties of rubber all in one material. Available in many of the same color combinations as UltreX G-10 you are sure to find the perfect combination for your application. This is manufactured in the USA.
- Scales are 1.5x6, sold as a pair
- See more on Amazon...
Brand: USA Knifemaker
See On Amazon #12
Pink No Scratch Buffing Compound- Rogue- Knifemaking-Jewelry-Automotive- Approximately 3lb Bar- Made in The USA
Asin: B0CYVDHFP5
This Pink Also Works Well For Bone And Ivory Where Green Chrome Buff Would Color Those Materials..
This Is For A Shine When Polishing Acrylic, Plastics, G10's Or Wood Materials..
Use This Compound To Remove Any Cloud Or Fog From Steels After Gray Or White Buffing Action. It Will Work Well For All Steels..
Made In The Usa.
Features
- Approximately 2.5-3lb bar
- Made in the USA
- This pink also works well for bone and ivory where green chrome buff would color those materials.
- Use this compound to remove any cloud or fog from steels after gray or white buffing action. It will work well for all steels.
- This is for a shine when polishing acrylic, plastics, G10's or wood materials.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Maverick Abrasives
Dimensions: 2.00 x 10.00 x 2.00 Inches | Weight: 3.00 Pounds
See On Amazon #13
Ultrex Burlap Micarta- 1/8" Scales-Knife Handle Material (Red)
Asin: B0B4PZB5JP | Ean: 0616639521818 | UPC: 616639521818
Made In The Usa.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications..
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Scales Are 1/8"X1.5"X6", Sold As A Pair.
Features
- Use this as a durable knife handle material
- Scales are 1/8x1.5x6, sold as a pair
- Made in the USA
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- See more on Amazon...
Brand: USA Knifemaker
See On Amazon #14
UltreX Canvas Micarta- 1/8" Scales- Knife Handle Material (Black and OD Green)
Asin: B0B4PML9TT | Ean: 0616639461893 | UPC: 616639461893
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications..
Made In The Usa.
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Scales Are 1.5"X6", Sold As A Pair.
Features
- Use this as a durable knife handle material
- Scales are 1.5x6, sold as a pair
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Made in the USA
- See more on Amazon...
Brand: USA Knifemaker
See On Amazon #15
UltreX Canvas Micarta - 1/4" Scales- Knife Handle Material (Camo)
Asin: B0B4PM3XSH | Ean: 0616639521740 | UPC: 616639521740
Scales Are 1.5"X6", Sold As A Pair.
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications..
Made In The Usa.
Features
- Use this as a durable knife handle material
- Made in the USA
- Scales are 1.5x6, sold as a pair
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Norplex
See On Amazon #16
1095 Bar Stock Steel- 36" Bar- High Carbon Steel-Knifemaking (0.125"x4")
Asin: B0BRNRS2BC | Ean: 0616639522563 | UPC: 616639522563
1095 Is Often Recommended To New Knife Makers As An "Easy" Steel To Heat Treat. The Problem Is That It Needs A Very Fast Quench To Harden Properly. 1095 Needs To Be Quenched In A Very Fast Oil Like Park's 50. New Knife Makers Will Be Better Off Using 1084, 1075, Or 80Crv2 Steels..
Thicknesses Are As Follows: .062", .093", .125".
This Steel Is Fully Annealed (Soft).
1095 Is One Of The Most Commonly Used Carbon Steels For Both Forging And Stock Removal. It Is Inexpensive, Forges Easily, And Can Be Used For Any Sort Of Knife From Hunting Or Kitchen Knives As Well As Folders Or Hard Use Fixed Blades..
Features
- Bar is 36" long, Thickness and Width is listed in the choice
- 1095 is one of the most commonly used carbon steels for both forging and stock removal. It is inexpensive, forges easily, and can be used for any sort of knife from hunting or kitchen knives as well as folders or hard use fixed blades.
- 1095 is often recommended to new knife makers as an easy steel to heat treat. The problem is that it needs a very fast quench to harden properly. 1095 needs to be quenched in a very fast oil like Park's 50. New knife makers will be better off using 1084, 1075, or 80Crv2 steels.
- This steel is fully annealed (soft)
- Thicknesses are as follows: .062, .093, .125
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Voestalpine
Weight: 6.00 Pounds
See On Amazon #17
UltreX Burlap Micarta-3/16" Scales- Knife Handle Material (Natural)
Asin: B0B4PZXW6M | Ean: 0616639508277 | UPC: 616639508277
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications..
Use This As A Durable Knife Handle Material.
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Scales Are 3/16"X1.5"X6", Sold As A Pair.
Features
- Made in the USA
- Scales are 3/16x1.5x6, sold as a pair
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Use this as a durable knife handle material
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Norplex
See On Amazon #18
Stainless Steel Bar- AEB-L- Stainless Steel for Knifemaking, Metalworking, Forging- 12" Piece (1, 065"x4")
Asin: B0CZYXDCWK
Extremely Easy To Grind.
Very Easy To Polish And Buff.
Heat Treat Like 440C.
This Steel Is Fully Stainless Steel But Perform Much Like Carbon Steel. It Is Descaled And Annealed..
Features
- When you order 1 quantity, you receive a 12" piece
- This steel is fully stainless steel but perform much like carbon steel. It is Descaled and Annealed.
- Extremely easy to grind
- Heat treat like 440c
- Very Easy to polish and buff
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: New Jersey Steel Baron
Dimensions: 0.07 x 12.00 x 1.00 inches
See On Amazon #19
Satin-Glo Greaseless Polishing Compound (100grit)
Asin: B085TBZTJ5 | Ean: 0616639480146 | UPC: 616639480146
Excellent For Cleaning Rusty Surfaces And Welding Burns And For Removing Machine Marks..
Satin-Glo Compound Is Easily Applied To Loose Or Tight Sewed Buffs, Hard Felt Or Cloth Polishing Wheels And Small Bobs. This Allows Extreme Flexibility For The Operator When Finishing Articles That Have Flat Or Rounded Surfaces As Well As Irregular, Restricted And Recessed Areas..
Greaseless Compounds Have A Water Soluble Adhesive Base, Which Dries Hard If Left Exposed To Air. To Prevent This, Open Tubes Should Be Resealed Or Wrapped In A Damp Cloth. Warm Weather Softens Greaseless Compounds- Sometimes Excessively. To Harden Compound, Store Under Refridgeration Or Put Unopoened Tubes In Cold Water Prior To Using..
Use For Burring, Polishing, Trimming, Blending, Breaking Edges And Removing Machine Marks, Pits, And Surface Imperfections..
Features
- Produces a Satin, Butler, or Semi-Bright finish.
- Use for Burring, Polishing, Trimming, Blending, Breaking Edges and Removing Machine Marks, Pits, and Surface Imperfections.
- Excellent for Cleaning Rusty Surfaces and Welding Burns and for Removing Machine Marks.
- Greaseless compounds have a water soluble adhesive base, which dries hard if left exposed to air. To prevent this, open tubes should be resealed or wrapped in a damp cloth. Warm weather softens greaseless compounds- sometimes excessively. To harden compound, store under refridgeration or put unopoened tubes in cold water prior to using.
- Satin-Glo Compound is easily applied to loose or tight sewed buffs, hard felt or cloth polishing wheels and small bobs. This allows extreme flexibility for the operator when finishing articles that have flat or rounded surfaces as well as irregular, restricted and recessed areas.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 3.00 Pounds
See On Amazon #20
3/4" to 5/8" x 3" Shaft Adapter Pulley Bore Reducer Sleeve Bushing
Asin: B0CS4K16Y1
Use For Automotive Or Reducing The Id On A Grinding Wheel.
Sold As A Single Piece.
Features
- 3/4" to 5/8" x 3"
- Sold as a single piece
- Use for automotive or reducing the ID on a grinding wheel
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Climax Metal Products
See On Amazon #21
AAA Quench Oil - 1 Gallon Jug
Asin: B07V5R4X1Q | Ean: 0616639501766 | UPC: 616639501766
Parks Aaa Is Considered A Medium To Medium Fast Oil. Many Times A Quench Oil Is Described In Seconds Quenching Using A Nickel Ball Test. The Nickel Ball Quench Time Is 9-11 Seconds..
Note: All Shipping Will Be Via Ups Ground. No International Shipments..
Typical Steels To Use With This Quench Oil Formula Include: O1, 5160, 1080, 1084. Many Others Steels Using “Medium” Speed (There Is No Hard And Fast Definition Of “Fast” Or “Medium”) Will Be Appropriate With This Quench Oil..
Nickel Ball Time: 9 – 11 Seconds, Flash Point: > 340°F.
Features
- Appearance: Light Amber Oil, Viscosity @ 100 F: 14.0 19.3 cSt
- Nickel Ball Time: 9 11 seconds, Flash Point: > 340 F
- Parks AAA is considered a medium to medium fast oil. Many times a quench oil is described in seconds quenching using a Nickel Ball test. The Nickel Ball quench time is 9-11 seconds.
- Typical steels to use with this quench oil formula include: O1, 5160, 1080, 1084. Many others steels using medium speed (there is no hard and fast definition of fast or medium ) will be appropriate with this quench oil.
- Note: All shipping will be via UPS ground. No international shipments.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 9.10 Pounds
See On Amazon #22
Ultrex G10 Knife Handle Material-3/16" Scales (Black/Hunter Orange)
Asin: B0B4YLSFZC | Ean: 0616639498332 | UPC: 616639498332
Made In The Usa.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered By The Westinghouse Company For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods Of Westinghouse, Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Scales Are 1.5"X6", Sold As A Pair.
Features
- Use for knifemaking, very durable!
- Scales are 1.5x6, sold as a pair
- Made in the USA
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods of Westinghouse, updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered by the Westinghouse company for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Norplex
See On Amazon #23
UltreX G10 - Black Knife Handle Material (1/2" Scales)
Asin: B0B4YT2DH3 | Ean: 0616639481358 | UPC: 616639481358
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods , Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Scales Are 1.5"X6", Sold As A Pair.
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Various Thicknesses.
Features
- Sheet is 6"x12"
- Various Thicknesses
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods , updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Scales are 1.5x6, sold as a pair
- See more on Amazon...
Brand: USA Knifemaker
See On Amazon #24
UltreX G10 - Black & Tan - Knife Handle Material (1/4" Scales)
Asin: B0B4TW29DD | Ean: 0616639498691 | UPC: 616639498691
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered By The Westinghouse Company For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods Of Westinghouse, Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Made In The Usa.
Features
- Scales 1.5"x6", pair of scales
- Made in the USA
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered by the Westinghouse company for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods of Westinghouse, updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- See more on Amazon...
Brand: USA Knifemaker
See On Amazon #25
Kastolite 30 LI Plus- 3,000F- 5lb Bag
Asin: B0CY3928G4
A High-Strength Refractory With A 3000° Temperature Limit. High-Alumina 55.6%, High-Temperature, High Strength Lightweight Castable. Great For Making A Forge Floor Or Casting The Whole Forge..
Kast O' Lite 30 Requires 92 Pounds Per Cubic Foot. This Means 5 Pounds Will Cover 0.054 Ft3 Or 93.3 Cubic Inches..
Features
- Comes in a 5lb Bag
- Kast O' Lite 30 requires 92 pounds per cubic foot. This means 5 pounds will cover 0.054 ft3 or 93.3 cubic inches.
- A high-strength refractory with a 3000 Temperature Limit. High-alumina 55.6%, high-temperature, high strength lightweight castable. Great for making a forge floor or casting the whole forge.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Smith-Sharpe Fire Brick Supply
Weight: 5.40 pounds
See On Amazon #26
Kitchen - 3" Paring Knife - Blade Blank - Chef Maker(tm) Line
Asin: B07ZQRPFGY | Ean: 0616639505511 | UPC: 616639505511
3 - 3/16" (.188") Diameter Pin Holes , Handle Size 4" X 3/4".
Chef Maker(Tm) Pantry Style, There Are Others That Match This Style.
Made In China, But This Steel Is Comparable To 440C. These Come Very Sharp!.
9Cr18mov Stainless Steel, Satin Finish, Heat Treated Ready For You To Finish, Very Sharp Hollow Grind.
Features
- Over all length 7", Blade length 3", Blade Thickness 3/32" (.09")
- 9Cr18MoV Stainless Steel, Satin Finish, Heat Treated Ready for You to Finish, Very Sharp Hollow Grind
- 3 - 3/16 (.188) diameter pin holes , Handle Size 4 x 3/4
- Made in China, but this steel is comparable to 440c. These come very sharp!
- Chef Maker(tm) Pantry Style, there are others that match this style
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
Weight: 0.10 Pounds
See On Amazon #27
80CRV2 Steel Bars- 3 Foot Bars (.125x1.5, 1)
Asin: B0CNQ8XR1J | Model: 80CRV2 | PartNumber: 80CRV2
Size Is .125" Thick Or .156" Thick, 1.5" Wide Or 2" Wide.
Use For Knifemaking Or Other Projects.
Steel Is Soft, Needs To Be Heat Treated.
Features
- 36" long bars, order one, you get one bar
- Steel is soft, needs to be heat treated
- Size is .125 thick or .156 thick, 1.5 wide or 2 wide
- Use for knifemaking or other projects
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: Bestar
See On Amazon #28
Ultrex G10 Knife Handle Material-1/4" Scales (Black/OD Green)
Asin: B0B4Z4VTXP | Ean: 0616639498059 | UPC: 616639498059
Now Available In Several Different Colors, Combinations, And Surface Treatments, Ultrex Paper And Cotton Phenolic Materials Use The Original Production Methods , Updated With Today’S Process And Environmental Controls. And Unlike Other “Micarta” Available In The Market, Ultrex Micarta Is Produced In The Usa..
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Micarta Was The Original Knife Handle Material. But Before That, It Proved Its Toughness And Durability In Demanding Electrical And Mechanical Industrial Applications. Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Made In The Usa.
Features
- Scales are 1.5"x6", sold as a pair
- Made in the USA
- Now available in several different colors, combinations, and surface treatments, UltreX paper and cotton phenolic materials use the original production methods , updated with today s process and environmental controls. And unlike other micarta available in the market, UltreX Micarta is produced in the USA.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications. Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- See more on Amazon...
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
See On Amazon #29
Camel Bone- Smooth White- Knife Scales, Guitar Parts, Scrimshaw- 0.23" x 1.2" x 5" Pair of Scales
Asin: B0CZSG1GQJ
.23" Thick X 1.2" Wide X 5" Long.
No Back Fill.
Brand: USA Knifemaker | Manufacturer: USA Knifemaker
See On Amazon #30
UltreX Linen Micarta- 1/8" Scales- Knife Handle Material (Natural)
Asin: B0B4T7T79X | Ean: 0616639455229 | UPC: 616639455229
Use This As A Durable Knife Handle Material.
Scales Are 1.5"X6", Sold As A Pair.
Made In The Usa.
Pioneered For Use In Power Generating And Utility Scale Transformers, The Micarta Brand Became Synonymous With A Specific Style Of Laminated Composite — Paper And Cotton Fabric Reinforced Phenolic..
Features
- Micarta was the original knife handle material. But before that, it proved its toughness and durability in demanding electrical and mechanical industrial applications.
- Pioneered for use in power generating and utility scale transformers, the Micarta brand became synonymous with a specific style of laminated composite paper and cotton fabric reinforced phenolic.
- Use this as a durable knife handle material
- Made in the USA
- Scales are 1.5x6, sold as a pair
- See more on Amazon...
Brand: USA Knifemaker
See On Amazon