Uenede - Buying Guide
Last Updated: 04/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Uenede 2PCS 3/8 Inch Brass Mini Ball Valve 3/8" Female to 3/8" Female Thread Shut-off Valve with Operation Handle Pipe Threaded Fittings for Water/Oil/Gas
Asin: B09LQNF9WN | Model: 1ZM-IDS-01370 | PartNumber: 1ZM-IDS-01370
【Heavy & Thick】Heavy Brass Valve And Thickened Wall, Higher Strength And Very Rugged..
【Solid Connection】The Threaded Ball Valve Can Be Solid Connected To The Pipe. When Used Together With Teflon Tape Or Sealant, It Can More Effectively Prevent Leakage..
【Operation Handle】Plastic-Covered Lever Handle For On/Off Manual Control. Widely Used In Pneumatic System, Such As Propane Gas Air Hose, Fuel Line. It's Also Popular In Garden Draining..
【Solid Brass】The Shut-Off Valves Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 2PCS 3/8" Female x 3/8" Female Thread Ball Valve.
- Solid Brass The shut-off valves are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Heavy brass valve and thickened wall, higher strength and very rugged.
- Operation Handle Plastic-covered lever handle for on/off manual control. Widely used in pneumatic system, such as propane gas air hose, fuel line. It's also popular in garden draining.
- Solid Connection The threaded ball valve can be solid connected to the pipe. When used together with Teflon tape or sealant, it can more effectively prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #2
Uenede 2PCS 1/4 NPT Female Thread Brass Bulkhead Coupler 3/4" Outer Diameter Water Tank Connector Thru-bulk Coupling Pipe Fitting
Asin: B09GV9DT5D | Model: 0ZM-IDS-00060 | PartNumber: 0ZM-IDS-00060
【Two Types Of Washers】We Offer Two Types Of Washers: Rubber Washers & Serrated Washers. The Use Scenarios Of The Two Gaskets Are Different, Which Can Meet Your Different Needs. Notice: Two Kinds Of Washers Cannot Be Used Together!.
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels, Suitable For Various Pipes, Faucets, Hoses, Fittings, Multiple Uses To Provide Convenience For Your Life..
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Water Pipe With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【High Quality Thread】The Bulkhead Fittings Are 1/2" Male And 1/4"Npt Female Thread, Which Are Applicable Models Fitting For Most Items. Please Check The Size Before Ordering..
Features
- Solid Brass The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- High Quality Thread The bulkhead fittings are 1/2 male and 1/4NPT female thread, which are applicable models fitting for most items. Please check the size before ordering.
- Two Types of Washers We offer two types of washers: Rubber washers & Serrated washers. The use scenarios of the two gaskets are different, which can meet your different needs. Notice: two kinds of washers CANNOT be used together!
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #3
Uenede Brass 1/4 Inch 3-way Y-shaped Shut-off Ball Valve with 2-switch 1/4" Hose Barb Include 3 Stainless Steel Clamps Hose Pipe Barb Fitting for Water/Oil/Gas
Asin: B09JZ5DXWL | Model: 0ZM-IDS-01140 | PartNumber: 0ZM-IDS-01140
【Heavy & Thick】Heavy 3-Way Y-Shaped Brass Valve And Thickened Wall, Higher Strength And Very Rugged..
【Application】Y-Shaped 3-Way Shut-Off Ball Valve Has 2 Switches Which Can Control 2 Channels Respectively, And Can Also Close One Of Them As A 2-Way Valve, Whatever You Want. Widely Used In Pneumatic System, Such As Propane Gas Air Hose, Fuel Line. It's Also Popular In Garden Draining..
【Solid Connection】The 3-Way Shaped Hose Barb Ball Valve Can Be Solid Connected To The Hose (Fit Hose Which Id Of 6Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Brass】The Shut-Off Valves Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. The Stainless Steel Clamps Can Avoid Hose Leakage Which Is Rustproof, Corrosion Resistance And Durable..
Features
- Package Include 1PCS 1/4"OD Barb 3-way shut-off valve; 3PCS stainless steel clamps.
- Solid Brass The shut-off valves are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid hose leakage which is rustproof, corrosion resistance and durable.
- Heavy & Thick Heavy 3-Way Y-shaped brass valve and thickened wall, higher strength and very rugged.
- Solid Connection The 3-Way shaped hose barb ball valve can be solid connected to the hose (Fit hose which ID of 6mm). Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- Application Y-shaped 3-way shut-off ball valve has 2 switches which can control 2 channels respectively, and can also close one of them as a 2-way valve, whatever you want. Widely used in pneumatic system, such as propane gas air hose, fuel line. It's also popular in garden draining.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #4
Uenede 2PCS Solid Brass 90 Elbow Barb Bulkhead Fitting 3/8 OD Barb Bulkhead Coupling Tank Connector Hose Pipe Barb Fitting for Water/Oil/Gas
Asin: B09LQHXRZC | Model: 0ZM-IDS-01210 | PartNumber: 0ZM-IDS-01210
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Pipe With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【Solid Connection】The Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 10Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Solid Brass】The Metal Parts Of Barb Bulkhead Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. Heavy 90°Elbow Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
Features
- Package Include 2PCS Brass 3/8"OD Barb 90 Elbow Hose Bulkhead Fittings.
- Solid Brass The metal parts of barb bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy 90 elbow shaped brass barbs and thickened wall, higher strength and very rugged.
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the pipe with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Solid Connection The hose barb fittings can be solid connected to the hose (Fit hose which ID of 10mm). Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #5
Uenede 6PCS Brass Hose Barb Fittings 3/8" NPT Male to 1/2" Barb Adapter Connector Include 6 Stainless Steel Clamps for Water/Oil/Gas
Asin: B09JNM2X9R | Model: 0ZM-IDS-00352 | PartNumber: 0ZM-IDS-00352
【Heavy & Thick】Heavy 2-Way Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The 2-Way Shaped Thread Hose Barb Fittings Can Be Solid Connected To The Pipe. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Package Include】6Pcs 3/8"Npt Male X 1/2" Barb 2-Way Thread Hose Barb Fittings; 6Pcs Stainless Steel Clamps..
Features
- Solid Brass The thread hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid garden hose leakage which is rustproof, corrosion resistance and durable.
- Package Include 6PCS 3/8NPT Male x 1/2 Barb 2-Way Thread Hose Barb Fittings; 6PCS stainless steel clamps.
- Heavy & Thick Heavy 2-Way shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The 2-Way shaped thread hose barb fittings can be solid connected to the pipe. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Note Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #6
Uenede 6PCS Solid Brass Thread Barb Hex Fittings 1/4"NPT Female x 1/4" Barb Include 6 Stainless Steel Clamps
Asin: B09JZ34D93 | Model: 0ZM-IDS-00930 | PartNumber: 0ZM-IDS-00930
【Heavy & Thick】Heavy 2-Way Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The 2-Way Shaped Thread Hose Barb Fittings Can Be Solid Connected To The Pipe. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Package Include】6Pcs 1/4"Npt Female X 1/4" Barb 2-Way Thread Hose Barb Fittings; 6Pcs Stainless Steel Clamps..
Features
- Solid Brass The thread hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid garden hose leakage which is rustproof, corrosion resistance and durable.
- Package Include 6PCS 1/4NPT Female x 1/4 Barb 2-Way Thread Hose Barb Fittings; 6PCS stainless steel clamps.
- Heavy & Thick Heavy 2-Way shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The 2-Way shaped thread hose barb fittings can be solid connected to the pipe. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Note Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #7
Uenede Solid Brass 1/2 Inch In-line Spring Check Valve 1/2" NPT Female Thread One-Way Non-return Prevent Water Back-flow
Asin: B09MHDJ13V | Model: 0ZM-IDS-01391 | PartNumber: 0ZM-IDS-01391
【Heavy & Thick】The Port Of The Premium Forged Brass Check Valve Is Carefully Designed With Precision Threads, Which Is Easy To Install And Connect. Large-Caliber Connection Means Higher Working Efficiency, Greater Flow, And Compact And Reliable Valve Body Structure..
【Widely Used】The Check Valve Can Be Used In Fluid Systems To Prevent Fluid Back-Flow, Or In Pneumatic Systems To Prevent Compressed Air Back-Flow, Reducing Accidents And Ensuring Normal Work. Widely Used In Pump And Compressor Discharge Cooling Towers, Hvac Systems, Pressure Pumps, Sump Pumps, Condensate Line, Boilers And Other Applications To Prevent Back-Flow..
【Great Tool】The Check Valve Are Respectively For Tube Connecting, Mainly Used For The One-Way Flow Of The Medium In The Pipeline, Which Only Allows The Medium To Flow In One Direction To Prevent The Medium From Back-Flow. Mark The Direction Of The Liquid Inlet, Which Is Convenient To Use And Effectively Prevents The Liquid From Flowing Back..
【Solid Brass】The Entire Body Of This Check Valve Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. The Internal Spring Is Stainless Steel. No Cheap And Flimsy Aluminum Or Plastic Material. Working Pressure Is 200Psi. Operating Temperature Range Is -40 To +250℉(-40 To +121℃)..
Features
- Package Include 1PCS 1/2" NPT Female thread check valve.
- Solid Brass The entire body of this check valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. The internal spring is stainless steel. No cheap and flimsy aluminum or plastic material. Working pressure is 200PSI. Operating temperature range is -40 to +250 (-40 to +121 ).
- Heavy & Thick The port of the premium forged brass check valve is carefully designed with precision threads, which is easy to install and connect. Large-caliber connection means higher working efficiency, greater flow, and compact and reliable valve body structure.
- Great Tool The check valve are respectively for tube connecting, mainly used for the one-way flow of the medium in the pipeline, which only allows the medium to flow in one direction to prevent the medium from back-flow. Mark the direction of the liquid inlet, which is convenient to use and effectively prevents the liquid from flowing back.
- Widely Used The check valve can be used in fluid systems to prevent fluid back-flow, or in pneumatic systems to prevent compressed air back-flow, reducing accidents and ensuring normal work. Widely used in pump and compressor discharge cooling towers, HVAC systems, pressure pumps, sump pumps, condensate line, boilers and other applications to prevent back-flow.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #8
Uenede 2PCS Brass 1/2" to 3/4" OD Barb Reducer Barbed Hose Fittings with 4 Stainless Steel Clamps Hex Reducing Splicer Mender Fitting for Water/Oil/Gas
Asin: B09GVGBRV8 | Model: 0ZM-IDS-00310 | PartNumber: 0ZM-IDS-00310
【Heavy & Thick】Heavy 2-Way Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The 2-Way Shaped Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 13Mm To 19Mm)..
【Package Include】2Pcs 1/2"Barb X 3/4"Barb 2-Way Reducer Hose Barb Fittings; 4Pcs Stainless Steel Clamps..
Features
- Solid Brass The reducer hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid garden hose leakage which is rustproof, corrosion resistance and durable.
- Package Include 2PCS 1/2Barb x 3/4Barb 2-Way Reducer Hose Barb Fittings; 4PCS stainless steel clamps.
- Heavy & Thick Heavy 2-Way shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The 2-Way shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 13mm to 19mm).
- Note Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #9
Uenede Magnetic Base with Barb Connector + 1/4"PT Flat Nozzle Plastic Coolant Pipe with Switch Adjustable Flexible Water Oil Cooling Hose
Asin: B09LQVB1X3 | Model: 0ZM-IDS-01470 | PartNumber: 0ZM-IDS-01470
【Magnetic Base】The Magnet Provides Strong Suction And Can Be Adsorbed In Any Position You Want. Flexible Installation And Placement To Solve The Trouble Of Finding A Place To Install..
【Widely Used】Used For Lathe, Milling, Cnc Machine, Hydraulic Machinery And Water Cooling System. Adjustable Body Make It Easy To Change The Shape And Angle To Meet Your Need..
【Brass Connector】The Male Thread To Barb Connector Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. The Barb Fitting Can Be Solid Connected To The Hose (Fit Hose Which Id Of 5/16")..
【Coolant Pipe With Switch】This Cooling Tube Adopts A Plastic Flexible Body, Light Weight And Easy To Install With Any Direction And Angle. Designed With A Convenient Valve So You Can Easily Open Or Close Fluid..
Features
- Package Include 1PCS 2-way 1/8"Female x 1/4"Female thread Magnetic Base; 1PCS 1/8"Male thread x 5/16"Barb Hose Connector; 1PCS 1/4"PT Male thread Coolant Pipe.
- Coolant Pipe with Switch This cooling tube adopts a plastic flexible body, light weight and easy to install with any direction and angle. Designed with a convenient valve so you can easily open or close fluid.
- Magnetic Base The magnet provides strong suction and can be adsorbed in any position you want. Flexible installation and placement to solve the trouble of finding a place to install.
- Brass Connector The male thread to barb connector is made of solid brass, which is strong and not easily corroded, suitable for long time use. The barb fitting can be solid connected to the hose (Fit hose which ID of 5/16).
- Widely Used Used for lathe, milling, CNC machine, hydraulic machinery and water cooling system. Adjustable body make it easy to change the shape and angle to meet your need.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #10
Uenede 2PCS Solid Brass Bulkhead Fitting 3/8 Female x 1/2 Male Double Threaded Bulkhead Water Tank Connector
Asin: B09GVB9VLM | Model: 0ZM-IDS-00010 | PartNumber: 0ZM-IDS-00010
【Double Washers Double Protection】Two Washers Are Respectively Padded On Both Sides Of The Bulkhead To Provide Double Protection. Better Prevent Leakage And Make You More Happy To Use Your Rain Bucket Or Something..
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels, Suitable For Various Pipes, Faucets, Hoses, Fittings, Multiple Uses To Provide Convenience For Your Life..
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Water Pipe With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【High Quality Thread】The Bulkhead Fittings Are Male And Female Thread, Which Are Applicable Models Fitting For Most Items. Please Check The Size Before Ordering..
Features
- Solid Brass The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- High Quality Thread The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering.
- Double Washers Double Protection Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something.
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Weight: 0.22 pounds
See On Amazon #11
Uenede 4PCS Brass Reducer Bushing, 3/4" NPT Male to 3/8" NPT Female Thread, Hex Reducing Convert Adapter Pipe Fitting Connector for Water/Oil/Gas
Asin: B09JVRW4MJ | Model: 0ZM-IDS-00710 | PartNumber: 0ZM-IDS-00710
【Heavy & Thick】Premium Forged Brass Reducer, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility..
【Solid Connection】Used To Connect A Female And A Male Pipes Or Fitting With Different Diameters. Apply To Plumbing Connections, Compressed Air, Hydraulic, Gas And Other Applications..
【Hex Nut Design】Hex Nut For Easy Tightening And Loosening. Easy To Use..
【Solid Brass】The Reducer Hex Bushing Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 4PCS 3/4"NPT Male x 3/8"NPT Female Thread Convert Adapter.
- Solid Brass The reducer hex bushing fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility.
- Hex Nut Design Hex nut for easy tightening and loosening. Easy to use.
- Solid Connection Used to connect a female and a male pipes or fitting with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #12
Uenede Universal Multifunctional Pressure Gauge 0-60PSI 2" Dial Stainless Steel Case 1/4"NPT Male Brass Bottom Mount
Asin: B09GVLPFC7 | Model: 0ZM-IDS-00470 | PartNumber: 0ZM-IDS-00470
【Material 】Stainless Steel Case; Glass Dial; Brass Adapter..
【Applicable】Water, Oil, Air And More. For Pressure Measuring Of Gas, Liquid Which Is Not Corrosive To Brass, Also Where Vibration And Pulsation Is A Concern..
【Installation Method】1/4"Npt Male Lower Mount..
【Measuring Range】Maximum Range: 0-60Psi; Temperature Range: 32-131℉/0-55℃; Accuracy: +/-3-2-3%.
Features
- Size 2" Dial Face; 1/4"NPT Male Lower Mount.
- Measuring Range Maximum Range: 0-60PSI; Temperature Range: 32-131 /0-55 ; Accuracy: +/-3-2-3%
- Material Stainless steel case; Glass dial; Brass adapter.
- Installation method 1/4NPT Male Lower Mount.
- Applicable Water, Oil, Air and more. For pressure measuring of gas, liquid which is not corrosive to brass, also where vibration and pulsation is a concern.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #13
Uenede 3PCS Brass 1/4"NPT Male to 3/8" Barb 90 Degrees Elbow Thread Pipe Hose Barb Fittings for Water/Oil/Gas
Asin: B09JNLRD91 | Model: 0ZM-IDS-00443 | PartNumber: 0ZM-IDS-00443
【Heavy & Thick】Heavy 90°Elbow Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The 90°Elbow Shaped Thread Hose Barb Fittings Can Be Solid Connected To The Pipe. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Package Include】3Pcs 1/4"Npt Male X 3/8" Barb 90°Elbow Thread Hose Barb Fittings..
Features
- Solid Brass The thread hose barb elbow fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Package Include 3PCS 1/4NPT Male x 3/8 Barb 90 Elbow Thread Hose Barb Fittings.
- Heavy & Thick Heavy 90 elbow shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The 90 elbow shaped thread hose barb fittings can be solid connected to the pipe. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Note Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #14
Uenede 2Sets Brass Bulkhead Fitting 1/2 Female x 3/4 GHT Male Double Threaded Bulkhead Water Tank Connector and 3/4"GHT Female Thread Plug End Caps Kit
Asin: B09JZ4TD39 | Model: 0ZM-IDS-00054 | PartNumber: 0ZM-IDS-00054
【Flexible Use】When There Is Still A Lot Of Water In Your Water Tank, But You Need To Remove The Garden Hose Which Connected To It, You Can Use This Plug To Keep The Water In The Tank..
【Widely Use】Easy Connect And Disconnect To 3/4" Standard Garden Hose, For Watering Garden Plants, Washing Car, Washing Roof, Washing Fence And Other Daily Life Use..
【Double Washers Double Protection】Every Adapter Is Equipped With Rubber Gaskets To Provide Double Protection. Better Prevent Leakage And Make You More Happy To Use Your Rain Bucket Or Something..
【Solid Brass】The Metal Parts Of Bulkhead Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 2PCS Bulkhead Pipe Connector (1/2" Female x 3/4"GHT Male); 2PCS Garden Hose End Plugs (3/4"GHT Female).
- Solid Brass The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Flexible Use When there is still a lot of water in your water tank, but you need to remove the garden hose which connected to it, you can use this plug to keep the water in the tank.
- Double Washers Double Protection Every adapter is equipped with rubber gaskets to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something.
- Widely Use Easy connect and disconnect to 3/4 standard garden hose, for watering garden plants, washing car, washing roof, washing fence and other daily life use.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #15
Uenede 4PCS Brass 1/2 Inch NPT Caps Outer Hex 1/2" NPT Female Thread Socket Pipe End Cap Plugs Fitting for Water/Oil/Gas
Asin: B0BXD5WCVJ | Model: 0ZM-IDS-02640 | PartNumber: 0ZM-IDS-02640
【Heavy & Thick】Premium Forged Brass Plugs, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility..
【Solid Sealing】Designed To Create A Tighter Seal. Thread Plug Are Also Great For Blocking Off Intake Manifold Water Ports, Water Pump Ports, Water Temp And Oil Sender Holes, Engine Block Holes, Etc..
【Hex Nut Design】Hex Nut For Easy Tightening And Loosening. Easy To Use..
【Solid Brass】The Hex Thread Plugs Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 4PCS 1/2"NPT female brass outer hex thread caps.
- Solid Brass The hex thread plugs are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Premium forged brass plugs, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility.
- Hex Nut Design Hex nut for easy tightening and loosening. Easy to use.
- Solid Sealing Designed to create a tighter seal. Thread plug are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #16
Uenede 4PCS Brass 1/2 Inch NPT Plug Inter Hex 1/2" NPT Male Thread Socket Pipe End Plugs Fitting for Water/Oil/Gas
Asin: B09JVXQJSD | Model: 0ZM-IDS-00810 | PartNumber: 0ZM-IDS-00810
【Heavy & Thick】Premium Forged Brass Plugs, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility..
【Solid Sealing】Designed To Create A Tighter Seal. Thread Plug Are Also Great For Blocking Off Intake Manifold Water Ports, Water Pump Ports, Water Temp And Oil Sender Holes, Engine Block Holes, Etc..
【Hex Nut Design】Hex Nut For Easy Tightening And Loosening. Easy To Use..
【Solid Brass】The Hex Thread Plugs Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 4PCS 1/2"NPT Male brass inter hex thread plug.
- Solid Brass The hex thread plugs are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Premium forged brass plugs, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility.
- Hex Nut Design Hex nut for easy tightening and loosening. Easy to use.
- Solid Sealing Designed to create a tighter seal. Thread plug are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Weight: 0.00 pounds
See On Amazon #17
Uenede Solid Brass 1/2 Inch Horizontal Swing Check Valve 1/2" Female Thread Non-return One-Way Prevent Water Back-flow
Asin: B0B652FD1K | Model: 1ZM-IDS-01121 | PartNumber: 1ZM-IDS-01121
【Heavy & Thick】The Port Of The Premium Forged Brass Check Valve Is Carefully Designed With Precision Threads, Which Is Easy To Install And Connect. Large-Caliber Connection Means Higher Working Efficiency, Greater Flow, And Compact And Reliable Valve Body Structure..
【Widely Used】The Large-Caliber, Large-Flow Check Valve Can Be Used In Fluid Systems To Prevent Fluid Back-Flow, Or In Pneumatic Systems To Prevent Compressed Air Back-Flow, Reducing Accidents And Ensuring Normal Work. It Is Widely Used In Water Purifiers, Solar Energy, Gas Water Heaters, Faucets, Etc..
【Great Tool】The Non-Return Valve Are Respectively For Tube Connecting, Mainly Used For The One-Way Flow Of The Medium In The Pipeline, Which Only Allows The Medium To Flow In One Direction To Prevent The Medium From Back-Flow. Mark The Direction Of The Liquid Inlet, Which Is Convenient To Use And Effectively Prevents The Liquid From Flowing Back..
【Solid Brass】The Entire Body Of This Check Valve Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. Can Work Normally Under 232Psi Pressure. No Cheap And Flimsy Aluminum Or Plastic Material..
Features
- Package Include 1PCS 1/2" Female thread check valve.
- Solid Brass The entire body of this check valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. Can work normally under 232PSI pressure. No cheap and flimsy aluminum or plastic material.
- Heavy & Thick The port of the premium forged brass check valve is carefully designed with precision threads, which is easy to install and connect. Large-caliber connection means higher working efficiency, greater flow, and compact and reliable valve body structure.
- Great Tool The non-return valve are respectively for tube connecting, mainly used for the one-way flow of the medium in the pipeline, which only allows the medium to flow in one direction to prevent the medium from back-flow. Mark the direction of the liquid inlet, which is convenient to use and effectively prevents the liquid from flowing back.
- Widely Used The large-caliber, large-flow check valve can be used in fluid systems to prevent fluid back-flow, or in pneumatic systems to prevent compressed air back-flow, reducing accidents and ensuring normal work. It is widely used in water purifiers, solar energy, gas water heaters, faucets, etc.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #18
Uenede 4PCS 1/4 Inch NPT Brass Hex Nipple Coupling 1/4" NPT x 1/4" NPT Male Threaded Equal Diameter Coupler Air Hose Pipe Fittings Adapter for Water/Oil/Gas
Asin: B09JZ5153H | Model: 0ZM-IDS-01030 | PartNumber: 0ZM-IDS-01030
【Heavy & Thick】Premium Forged Brass Connector, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility..
【Solid Connection】Coupling For Connecting Two Pipes With The Same Diameter In A Straight Run, Or Extending The Pipe Length. Apply To Plumbing Connections, Compressed Air, Hydraulic, Gas And Other Applications..
【Hex Design】Hex For Easy Tightening And Loosening. Easy To Use..
【Solid Brass】The Hex Pipe Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 4PCS 1/4"NPT Male thread pipe fittings.
- Solid Brass The hex pipe fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Premium forged brass connector, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility.
- Hex Design Hex for easy tightening and loosening. Easy to use.
- Solid Connection Coupling for connecting two pipes with the same diameter in a straight run, or Extending the pipe length. Apply to plumbing connections, compressed air, hydraulic, gas and other applications.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #19
Uenede 6PCS Solid Brass 1/4"OD Barb Elbow Fittings 2-Way 90 Degree L Right Angle Barbed Fitting for Water/Oil/Gas
Asin: B0B53HLYL7 | Model: 0ZM-IDS-01930 | PartNumber: 0ZM-IDS-01930
【Heavy & Thick】Heavy Elbow Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The Elbow Shaped Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 6.6Mm). It Can Avoid Bending When Using The Hose..
【Package Include】6Pcs 1/4" Brass 2-Way Elbow Hose Barb Fittings..
Features
- Solid Brass The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Package Include 6PCS 1/4 Brass 2-Way Elbow Hose Barb Fittings.
- Heavy & Thick Heavy elbow shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The elbow shaped barb fittings can be solid connected to the hose (Fit hose which ID of 6.6mm). It can avoid bending when using the hose.
- Note Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #20
Uenede 2PCS 1/4 Inch Brass Mini Ball Valve 1/4" Male to 1/4" Female Thread Shut-off Valve with Operation Handle Pipe Threaded Fittings for Water/Oil/Gas
Asin: B09LQKNYD5 | Model: 1ZM-IDS-01380 | PartNumber: 1ZM-IDS-01380
【Heavy & Thick】Heavy Brass Valve And Thickened Wall, Higher Strength And Very Rugged..
【Solid Connection】The Threaded Ball Valve Can Be Solid Connected To The Pipe. When Used Together With Teflon Tape Or Sealant, It Can More Effectively Prevent Leakage..
【Operation Handle】Plastic-Covered Lever Handle For On/Off Manual Control. Widely Used In Pneumatic System, Such As Propane Gas Air Hose, Fuel Line. It's Also Popular In Garden Draining..
【Solid Brass】The Shut-Off Valves Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 2PCS 1/4" Male x 1/4" Female Thread Ball Valve.
- Solid Brass The shut-off valves are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Heavy brass valve and thickened wall, higher strength and very rugged.
- Operation Handle Plastic-covered lever handle for on/off manual control. Widely used in pneumatic system, such as propane gas air hose, fuel line. It's also popular in garden draining.
- Solid Connection The threaded ball valve can be solid connected to the pipe. When used together with Teflon tape or sealant, it can more effectively prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #21
Uenede 2PCS 24" Length Stainless Steel Hanging Chair Chain with 4 Carabiners Load Bearing 400-800LB
Asin: B09MNBRLYD
【Stainless Steel】Each Rings Of The Chain Are Made Of High Quality Stainless Steel, Welded And Zinc Coated Which Ensure It Extremely Durable And Rust Resistant. Ideal Chains For Heavy Duty And Outdoor Use. Load Bearing 400-800Lb..
【Utility】Best Hanging Accessories For A Family, Playground, Gym To Hang Hammock Chairs, Porch Swings, Punching Bags, Aerial Yoga Or Any Other Heavy Object To The Ceiling..
【Easy To Use】This Chain Kit Can Be Installed Easily, Just Connect The Spring Snaps With Your Loved Hanging Chair Or Hammock And Adjust To Your Personal Desired Height..
【Adjustable Length】With The Help Of Two Carabiners, You Can Adjust The Length To The Best Fit..
Features
- Package Include 2 Chains 49cm/19.3" each; 4 Carabiners 7cm/2.7" each; Total length of connection 61cm/24".
- Adjustable Length With the help of two carabiners, you can adjust the length to the best fit.
- Stainless Steel Each rings of the chain are made of high quality stainless steel, welded and zinc coated which ensure it extremely durable and rust resistant. Ideal chains for heavy duty and outdoor use. Load Bearing 400-800LB.
- Easy to Use This chain kit can be installed easily, Just connect the spring snaps with your loved hanging chair or hammock and adjust to your personal desired height.
- Utility Best hanging accessories for a family, playground, gym to hang hammock chairs, porch swings, Punching Bags, Aerial Yoga or any other heavy object to the ceiling.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #22
Uenede 4PCS Brass 3/4 Inch NPT Plug Outer Hex 3/4" NPT Male Thread Socket Pipe End Plugs Fitting for Water/Oil/Gas
Asin: B09JVMFX49 | Model: 0ZM-IDS-00860 | PartNumber: 0ZM-IDS-00860
【Heavy & Thick】Premium Forged Brass Plugs, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility..
【Solid Sealing】Designed To Create A Tighter Seal. Thread Plug Are Also Great For Blocking Off Intake Manifold Water Ports, Water Pump Ports, Water Temp And Oil Sender Holes, Engine Block Holes, Etc..
【Hex Nut Design】Hex Nut For Easy Tightening And Loosening. Easy To Use..
【Solid Brass】The Hex Thread Plugs Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 4PCS 3/4"NPT Male brass Outer hex thread plug.
- Solid Brass The hex thread plugs are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Premium forged brass plugs, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility.
- Hex Nut Design Hex nut for easy tightening and loosening. Easy to use.
- Solid Sealing Designed to create a tighter seal. Thread plug are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #23
Uenede Float Ball Valve DN20 3/4" Male Thread Stainless Steel Floating Ball Brass Valve Automatic Switch for Stock Tank Pool Water Level Control
Asin: B09ZQF2XV5 | Model: 0ZM-IDS-01850 | PartNumber: 0ZM-IDS-01850
【High Quality Material】Valve Material: Brass. Floating Ball Material: Stainless Steel. Sturdy And Solid, Reliable And Serviceable To Use, Not Easy To Break, Deform Or Bend, With Nice Corrosion Resistance, Able To Be Applied For A Long Time..
【Good Helper For Life】No Longer Need To Be Busy Turning On The Switch Every Day To Get Enough Water. No Longer Worry About Wasting Water By Forgetting To Turn Off The Switch. After The Float Ball Valve Is Installed, The Required Water Volume Can Be Maintained In The Water Tank All The Time..
【Applications】Suitable For Domestic Water Pressure. Like Water Storage Tanks, Water Towers, Pools, Aquariums, Fish Tanks, Livestock Sinks, Aquaculture, Etc..
【Principle Of Working】The Float Ball Valve Controls The Flow Rate And Opening Or Closing Of The Inlet Pipe Through The Floating Ball. When The Water Level Rises To A Certain Level, The Water Injection Will Be Cut Off. When The Water Level Drops To A Certain Level, The Water Is Automatically Injected..
【Two Installation Methods】Double Mounting Angle Elbow Can Realize Two Flexible Connection Modes. Punch Holes In The Water Tank According To The Actual Needs. It Can Be Installed On The Side Of The Water Tank Or On The Top Of The Water Tank..
Features
- Size Float Ball Valve: DN20 3/4"G Male Thread. With an additional adapter: 3/4"G Female to 3/4"NPT Male Thread. It can meet the connection of two kinds of pipe threads.
- Two Installation Methods Double mounting angle elbow can realize two flexible connection modes. Punch holes in the water tank according to the actual needs. It can be installed on the side of the water tank or on the top of the water tank.
- High Quality Material Valve Material: Brass. Floating Ball Material: Stainless Steel. Sturdy and solid, reliable and serviceable to use, not easy to break, deform or bend, with nice corrosion resistance, able to be applied for a long time.
- Principle of Working The float ball valve controls the flow rate and opening or closing of the inlet pipe through the floating ball. When the water level rises to a certain level, the water injection will be cut off. When the water level drops to a certain level, the water is automatically injected.
- Good Helper for Life No longer need to be busy turning on the switch every day to get enough water. No longer worry about wasting water by forgetting to turn off the switch. After the float ball valve is installed, the required water volume can be maintained in the water tank all the time.
- Applications Suitable for domestic water pressure. Like water storage tanks, water towers, pools, aquariums, fish tanks, livestock sinks, aquaculture, etc.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #24
Uenede 4PCS Brass Compression Tube Fitting, Union, 1/4" Tube OD x 1/4" Tube OD Coupler Connector Pipe Fittings
Asin: B0CFZQVNGK | Model: 0ZM-IDS-03140 | PartNumber: 0ZM-IDS-03140
【Solid Brass】The Connectors Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
【Widely Use】Primary Uses Water, Fuel, Lquid, Gasoline, Oil, Air And Vacuum Lines. Max.Working Pressure Is 150Psi; Tempurature Range -65℉~ +250℉..
【Easy To Use】Use With Copper, Brass, Aluminum, Or Plastic Tubing. Standard Fittings Use Short Nuts..
【Three Piece Construction】Nut, Sleeve And Body With Attached Insert. Easy To Disassemble Without The Need For Flaring Tools..
Features
- Product Contains 4PCS 1/4" tube OD x 1/4" tube OD compression tube fittings.
- Three Piece Construction Nut, sleeve and body with attached insert. Easy to disassemble without the need for flaring tools.
- Solid Brass The connectors are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Easy to Use Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts.
- Widely Use Primary uses water, fuel, lquid, gasoline, oil, air and vacuum lines. MAX.working pressure is 150PSI; Tempurature range -65 ~ +250 .
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #25
Uenede Solid Brass 3-Port Air Compressor Check Valve M10*1 x G3/8" x G1/2" Male Female Threaded Tube Connector Non-Return Valve
Asin: B09MGZTP5G | Model: 0ZM-IDS-01421 | PartNumber: 0ZM-IDS-01421
【Heavy & Thick】The Port Of The Premium Forged Brass Check Valve Is Carefully Designed With Precision Threads, Which Is Easy To Install And Connect. The Three Threads Are Respectively For Tube Connecting, Air Pressure Tank And Compressor Piston Pump..
【Widely Used】The Check Valve Can Be Used In Pneumatic Systems To Prevent Compressed Air Back-Flow, Reducing Accidents And Ensuring Normal Work..
【Great Tool】A Compressor's Check Valves Perform An Essential Function. The Check Valve Prevents Air From Escaping The Tank Back Into The Pump Head. Before Replacing The Valve, Make Sure The Compressor Is Totally Shut Down And Pressure Is Relieved Completely..
【Solid Brass】The Entire Body Of This Check Valve Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. No Cheap And Flimsy Aluminum Or Plastic Material. Excellent Replacement For The Old Or Broken Check Valve Of Your Air Compressor..
Features
- Package Include 1PCS M10*1 Female x 3/8"G Male x 1/2"G Male thread check valve.
- Solid Brass The entire body of this check valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. No cheap and flimsy aluminum or plastic material. Excellent replacement for the old or broken check valve of your air compressor.
- Heavy & Thick The port of the premium forged brass check valve is carefully designed with precision threads, which is easy to install and connect. The three threads are respectively for tube connecting, air pressure tank and compressor piston pump.
- Great Tool A compressor's check valves perform an essential function. The check valve prevents air from escaping the tank back into the pump head. Before replacing the valve, make sure the compressor is totally shut down and pressure is relieved completely.
- Widely Used The check valve can be used in pneumatic systems to prevent compressed air back-flow, reducing accidents and ensuring normal work.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #26
Uenede 6PCS PPR Outer Hex 1/2" PT Male Thread Socket Pipe Plug Fittings End Caps for Water/Oil/Gas
Asin: B09JZ2K8HX | Model: 0ZM-IDS-00910 | PartNumber: 0ZM-IDS-00910
【Heavy & Thick】Premium Ppr Plugs, Thicker And Stronger, Durable, Threads Are Deep And Accurate..
【Solid Sealing】Designed To Create A Tighter Seal. Thread Plug For Use In Non-Pressure Residential And Commercial Drain, Waste, And Vent Sanitary Systems..
【Hex Nut Design】Hex Nut For Easy Tightening And Loosening. Easy To Use..
【Ppr】Ppr For Corrosion Resistance, High Strength, And Less Weight Than Fittings Made From Metal. For Drain, Waste, And Vent Systems(Dwv) And Has A Male Pt Threaded Connection..
Features
- Package Include 6PCS 1/2"PT Male PPR outer hex thread plug.
- PPR PPR for corrosion resistance, high strength, and less weight than fittings made from metal. For drain, waste, and vent systems(DWV) and has a male PT threaded connection.
- Heavy & Thick Premium PPR plugs, thicker and stronger, durable, threads are deep and accurate.
- Hex Nut Design Hex nut for easy tightening and loosening. Easy to use.
- Solid Sealing Designed to create a tighter seal. Thread plug for use in non-pressure residential and commercial drain, waste, and vent sanitary systems.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #27
Uenede Solid Brass 3-Port Air Compressor Check Valve G1/8" x G3/8" x G1/2" Male Threaded Tube Connector Non-Return Valve
Asin: B09MH2VW65 | Model: 0ZM-IDS-01411 | PartNumber: 0ZM-IDS-01411
【Heavy & Thick】The Port Of The Premium Forged Brass Check Valve Is Carefully Designed With Precision Threads, Which Is Easy To Install And Connect. The Three Threads Are Respectively For Tube Connecting, Air Pressure Tank And Compressor Piston Pump..
【Widely Used】The Check Valve Can Be Used In Pneumatic Systems To Prevent Compressed Air Back-Flow, Reducing Accidents And Ensuring Normal Work..
【Great Tool】A Compressor's Check Valves Perform An Essential Function. The Check Valve Prevents Air From Escaping The Tank Back Into The Pump Head. Before Replacing The Valve, Make Sure The Compressor Is Totally Shut Down And Pressure Is Relieved Completely..
【Solid Brass】The Entire Body Of This Check Valve Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. No Cheap And Flimsy Aluminum Or Plastic Material. Excellent Replacement For The Old Or Broken Check Valve Of Your Air Compressor..
Features
- Package Include 1PCS 1/8"G Male x 3/8"G Male x 1/2"G Male thread check valve.
- Solid Brass The entire body of this check valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. No cheap and flimsy aluminum or plastic material. Excellent replacement for the old or broken check valve of your air compressor.
- Heavy & Thick The port of the premium forged brass check valve is carefully designed with precision threads, which is easy to install and connect. The three threads are respectively for tube connecting, air pressure tank and compressor piston pump.
- Great Tool A compressor's check valves perform an essential function. The check valve prevents air from escaping the tank back into the pump head. Before replacing the valve, make sure the compressor is totally shut down and pressure is relieved completely.
- Widely Used The check valve can be used in pneumatic systems to prevent compressed air back-flow, reducing accidents and ensuring normal work.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #28
Uenede 2PCS Brass Push Button Check Valve, 1/4" NPT Female Thread, Air One-Way Control Switch Shut-Off Valve
Asin: B0CDP1T571 | Model: 0ZM-IDS-02675 | PartNumber: 0ZM-IDS-02675
【Heavy & Thick】The Port Of The Premium Forged Brass Check Valve Is Carefully Designed With Precision Threads, Which Is Easy To Install And Connect. Large-Caliber Connection Means Higher Working Efficiency, Greater Flow, And Compact And Reliable Valve Body Structure..
【Widely Used】The Check Valve Can Be Used In Fluid Systems To Prevent Fluid Back-Flow, Or In Pneumatic Systems To Prevent Compressed Air Back-Flow, Reducing Accidents And Ensuring Normal Work. Widely Used In Pump And Compressor Discharge Cooling Towers, Hvac Systems, Pressure Pumps, Sump Pumps, Condensate Line, Boilers And Other Applications To Prevent Back-Flow..
【Great Tool】The Check Valve Are Respectively For Tube Connecting, Mainly Used For The One-Way Flow Of The Medium In The Pipeline, Which Only Allows The Medium To Flow In One Direction To Prevent The Medium From Back-Flow. Mark The Direction Of The Medium Inlet, Which Is Convenient To Use And Effectively Prevents The Medium From Flowing Back..
【Solid Brass】The Entire Body Of This Check Valve Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. The Internal Spring Is Stainless Steel. No Cheap And Flimsy Aluminum Or Plastic Material. Working Pressure Is 200Psi. Operating Temperature Range Is -40 To +250℉(-40 To +121℃)..
Features
- Push Button Switch 1/4 inch NPT female thread. Unidirectional one-way. Normally closed type.
- Solid Brass The entire body of this check valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. The internal spring is stainless steel. No cheap and flimsy aluminum or plastic material. Working pressure is 200PSI. Operating temperature range is -40 to +250 (-40 to +121 ).
- Heavy & Thick The port of the premium forged brass check valve is carefully designed with precision threads, which is easy to install and connect. Large-caliber connection means higher working efficiency, greater flow, and compact and reliable valve body structure.
- Great Tool The check valve are respectively for tube connecting, mainly used for the one-way flow of the medium in the pipeline, which only allows the medium to flow in one direction to prevent the medium from back-flow. Mark the direction of the medium inlet, which is convenient to use and effectively prevents the medium from flowing back.
- Widely Used The check valve can be used in fluid systems to prevent fluid back-flow, or in pneumatic systems to prevent compressed air back-flow, reducing accidents and ensuring normal work. Widely used in pump and compressor discharge cooling towers, HVAC systems, pressure pumps, sump pumps, condensate line, boilers and other applications to prevent back-flow.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Dimensions: 1.00 x 2.00 x 0.50 inches
See On Amazon #29
Uenede 10PCS 1/4 Inch NPT Male Industrial Air Hose Quick Connect Plug Brass Finish Air Compressor Pneumatic Coupler Fitting Adapter
Asin: B0BXD618YZ | Model: 0ZM-IDS-02650 | PartNumber: 0ZM-IDS-02650
【Widely Used】These Industrial Plugs Are Great For Professional Jobsites, In Automotive Shops Or At Home In The Garage For Air Hose, Air Compressor, Air Tools, Air Nailer, Air Blow Gun, Pressure Washer..
【Specifications】Operating Temperature Range Is -40 To +250℉(-40 To +121℃). Working Pressure Of 300Psi..
【Sturdy Durable】Strong And Not Easily Corroded, Can Keep Tools Work Safely At High Temperatures And Pressures, Suitable For Long Time Use..
【Quick Connector】Quickly And Safely Connect And Disconnect System, Optimal Sealing And High Efficiency..
Features
- 1/4 Inch 1/4" NPT threaded end. Suitable for M-Style(Type D) couplers, compatiable with most air hoses or air tools.
- Quick Connector Quickly and safely connect and disconnect system, optimal sealing and high efficiency.
- Widely Used These industrial plugs are great for professional jobsites, in automotive shops or at home in the garage for air hose, air compressor, air tools, air nailer, air blow gun, pressure washer.
- Sturdy Durable Strong and not easily corroded, can keep tools work safely at high temperatures and pressures, suitable for long time use.
- Specifications Operating temperature range is -40 to +250 (-40 to +121 ). Working pressure of 300PSI.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #30
Uenede 4PCS Brass Straight Barb Bulkhead Fitting 3/16"OD Barb Thru-Bulk Coupling Tank Connector Hose Pipe Barb Fittings for Water/Oil/Gas
Asin: B0BL2Q9RSJ | Model: 0ZM-IDS-02240 | PartNumber: 0ZM-IDS-02240
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Hose With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【Solid Connection】The Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 5Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Solid Brass】The Metal Parts Of Barb Bulkhead Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. Heavy Straight Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
Features
- Package Include 4PCS Brass 3/16"OD Barb Hose Bulkhead Fittings.
- Solid Brass The metal parts of barb bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy straight shaped brass barbs and thickened wall, higher strength and very rugged.
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the hose with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Solid Connection The hose barb fittings can be solid connected to the hose (Fit hose which ID of 5mm). Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon