VTSYIQI - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
VTSYIQI Water Activity Meter Food AW Tester Monitor Water Analyzer for Grain Fruits Vegetables Breads Biscuits Cakes Puffed Food 6 bit Backlight Digital Display
Asin: B084WZNXH1 | Ean: 0738628196057 | UPC: 738628196057
Measuring Procedure------4.1 Press The Power Key To Switch On The Power And The Gauge Enters The Auto Mode Which Can Automatically Test The Water Activity. 4.2 Put The Samples Into The Sample Plate, And Then Cover The Of The Gauge Onto The Sample Plate. Lay Aside For About 5 Minutes, When The Reading Gets Stable, The Water Activity Can Be Obtained. 4.3 After Testing, Press And Hold The Power Key For About 3 Seconds To Turn Off The Gauge. Clean The Sample Plate For Next Use ..
Product Feature-----The Wa-160A Can Be Used To Measure The Water Activity Of Foods. No Matter When And Where You Need To Measure Water Activity, Wa-160A Water Activity Meter Is Your Unique Choice. This Is A Real Portable Water Activity Meter, With A Weight Of Only 100 Grams, Lighter Than A Mobile Phone, And A Precision Of 0.02 Aw, Easy To Measure Water Activity Anytime And Anywhere ..
Reading Correction------When It Is Necessary To Correct The Reading Value, Press And Hold The Power Key For About 7 Seconds. Then Release The Key When The Signal ‘Cor’, Comes Out On The Display. There Will Be A Decimal Number With Two Places, Which Is The Correction Value. Then Open The Battery Cover On The Back, There Are 2 Small Hole Below The Battery Slot. Use A Small Hard Bar (Such As Screwdriver) To Slightly Touch The Key Inside, The Correction Value Will Be Increased Or Decreased ..
Technical Parameters-----Technical Measuring Display: 6 Bit Backlight Lcd Digital Display, 3 Bit Humidity Aw, 3 Bit Temperature Display Range: 0~1.0Aw Resolution: ±0.01Aw Accuracy: ±0.02Aw : Non Conductive Humidity Sampling Time: 5 Minutes Operating Condition: Temp: 0~50°C (32~122°F) Humidity: <95%Rh Power Supply: 2X1.5V Aaa Um-4 Battery Size: 135X70x44mm Weight: 100G (Not Including Batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual ..
Features
- Product Description-----The activity meter can measure bread, biscuits, cakes, puffed foods, snack foods, dehydrated foods, dried fruits, meat clams, preserved fruits, etc. It mainly reflects the amount of free water in the state of food balance, the stability of food and the possibility of microbial reproduction, and the chemical, enzyme and physical changes that can cause the change of food quality. It is often used to measure the dryness enduring ability of the microorganisms .
- Technical Parameters-----Technical Measuring Display: 6 bit backlight LCD digital display, 3 bit humidity aw, 3 bit temperature display Range: 0~1.0aw Resolution: 0.01aw Accuracy: 0.02aw : Non conductive humidity Sampling Time: 5 Minutes Operating condition: Temp: 0~50 C (32~122 F) Humidity: <95%RH Power supply: 2x1.5V AAA Um-4 Battery Size: 135x70x44mm Weight: 100g (Not including batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual .
- Measuring Procedure------4.1 Press the power key to switch on the power and the gauge enters the auto mode which can automatically test the water activity. 4.2 Put the samples into the sample plate, and then cover the of the gauge onto the sample plate. Lay aside for about 5 minutes, when the reading gets stable, the water activity can be obtained. 4.3 After testing, press and hold the power key for about 3 seconds to turn off the gauge. Clean the sample plate for next use .
- READING CORRECTION------When it is necessary to correct the reading value, press and hold the Power Key for about 7 seconds. Then release the key when the signal Cor , comes out on the display. There will be a decimal number with two places, which is the correction value. Then open the battery cover on the back, there are 2 small hole below the battery slot. Use a small hard bar (such as screwdriver) to slightly touch the key inside, the correction value will be increased or decreased .
- Product Feature-----The WA-160A can be used to measure the water activity of foods. No matter when and where you need to measure water activity, WA-160A water activity meter is your unique choice. This is a real portable water activity meter, with a weight of only 100 grams, lighter than a mobile phone, and a precision of 0.02 aw, easy to measure water activity anytime and anywhere .
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 7.87 x 12.99 x 3.15 Inches
See On Amazon #2
VTSYIQI Industrial NDT LED Film Viewer Ultra-high luminance Radiographic Film Viewer GP-2000A With Maximum brightness 125000 CD/M2 388000 Lux 130mm 90mm for NDT Testing
Asin: B07JCT87M9 | Ean: 0681013842308 | UPC: 681013842308
Health-Caring.
Adjustable Luminace Level.
Foot Pedal Design, Energy-Saving.
Excellent Viewing Screen From Japan.
Features
- Imported LED,long duration and high luminance
- Excellent viewing screen from Japan
- Health-caring
- Foot pedal design, energy-saving
- Adjustable luminace level
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 5.91 x 15.75 x 3.94 Inches
See On Amazon #3
Four Wire Earth Ground Resistance Tester Meter Soil Resistivity Tester with Two Three Four Wire Soil Resistivity 9000k m 2000ohm
Asin: B088ZSB7MR | Ean: 0797550902839 | UPC: 797550902839
Short-Circuit Test Current: Ac 20Ma Max.
Overflow Display：Exceeding Measuring Range Overflow Function: "Ol" Symbol Display.
Measuring Range: 0.00Ω~30.00Kω.
Testing Voltage: Ac 0.0~600V.
Features
- Model Number: ETCR3100C
- Testing Voltage: AC 0.0~600V
- Short-circuit Test Current: AC 20mA max
- Measuring Range: 0.00 ~30.00K
- Overflow Display Exceeding measuring range overflow function: OL symbol display
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 7.87 x 11.81 x 1.97 Inches
See On Amazon #4
VTSYIQI Axial Probe Tesla Meter High Precision Gaussmeter Fluxmeter EMI Surface Magnetic Field Tester Gauss Meter Detector with Axial Probe 0-2400mT 2% Accuracy
Asin: B0828KB5GD | Ean: 0797550905519 | UPC: 797550905519
◆ The Value Can Be Switched By One Button: Mt (Mite) Or G (Gauss).
◆With Backlight Adjustment, Power Display And Automatic Shutdown Function Light Weight And Low Power Consumption.
◆ With Automatic Zero And Auto Range, And Maximum Hold Function.
◆ Dedicated To Measuring The Surface Flux Density Of Permanent Magnet Materials B, Range: 0 To 2400 Mt.
Features
- The product consists of three measurement accuracies, +/-1%, +/-2%, +/-5%, with different grades for different prices. (The product for this order 's accuracy is +/-5% )
- Dedicated to measuring the surface flux density of permanent magnet materials B, range: 0 to 2400 mT
- The value can be switched by one button: mT (mite) or G (gauss)
- With automatic zero and auto range, and maximum hold function
- With backlight adjustment, power display and automatic shutdown function Light weight and low power consumption
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
See On Amazon #5
VTSYIQI Water Activity Meter Smart Food Water Activity Meter For Food Water Activity Meters Monitor With Range 0 to 1.0AW Accuracy 0.02aw LCD Digital Display
Asin: B07H8WXT68 | Model: WA60A | PartNumber: WA60A | Ean: 0665059489659 | UPC: 665059489659
Measuring Procedure------4.1 Press The Power Key To Switch On The Power And The Gauge Enters The Auto Mode Which Can Automatically Test The Water Activity. 4.2 Put The Samples Into The Sample Plate, And Then Cover The Of The Gauge Onto The Sample Plate. Lay Aside For About 5 Minutes, When The Reading Gets Stable, The Water Activity Can Be Obtained. 4.3 After Testing, Press And Hold The Power Key For About 3 Seconds To Turn Off The Gauge. Clean The Sample Plate For Next Use ..
Product Feature-----The Vts-160A Can Be Used To Measure The Water Activity Of Foods. No Matter When And Where You Need To Measure Water Activity, Vts-160A Water Activity Meter Is Your Unique Choice. This Is A Real Portable Water Activity Meter, With A Weight Of Only 100 Grams, Lighter Than A Mobile Phone, And A Precision Of 0.02 Aw, Easy To Measure Water Activity Anytime And Anywhere ..
Reading Correction------When It Is Necessary To Correct The Reading Value, Press And Hold The Power Key For About 7 Seconds. Then Release The Key When The Signal ‘Cor’, Comes Out On The Display. There Will Be A Decimal Number With Two Places, Which Is The Correction Value. Then Open The Battery Cover On The Back, There Are 2 Small Hole Below The Battery Slot. Use A Small Hard Bar (Such As Screwdriver) To Slightly Touch The Key Inside, The Correction Value Will Be Increased Or Decreased ..
Technical Parameters-----Display: 6 Bit Backlight Lcd Digital Display, 3 Bit Humidity Aw, 3 Bit Temperature Display Range: 0~1.0Aw Resolution: ±0.01Aw Accuracy: ±0.02Aw: Non Conductive Humidity Sampling Time: 5 Minutes Operating Condition: Temp: 0~50°C (32~122°F) Humidity: <95%Rh Power Supply: 2X1.5V Aaa Um-4 Battery Size: 135X70x44mm Weight: 100G (Not Including Batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual ..
Features
- Product Description-----The activity meter can measure bread, biscuits, cakes, puffed foods, snack foods, dehydrated foods, dried fruits, meat clams, preserved fruits, etc. It mainly reflects the amount of free water in the state of food balance, the stability of food and the possibility of microbial reproduction, and the chemical, enzyme and physical changes that can cause the change of food quality. It is often used to measure the dryness enduring ability of the microorganisms .
- Technical Parameters-----Display: 6 bit backlight LCD digital display, 3 bit humidity aw, 3 bit temperature display Range: 0~1.0aw Resolution: 0.01aw Accuracy: 0.02aw: Non conductive humidity Sampling Time: 5 Minutes Operating condition: Temp: 0~50 C (32~122 F) Humidity: <95%RH Power supply: 2x1.5V AAA Um-4 Battery Size: 135x70x44mm Weight: 100g (Not including batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual .
- Measuring Procedure------4.1 Press the power key to switch on the power and the gauge enters the auto mode which can automatically test the water activity. 4.2 Put the samples into the sample plate, and then cover the of the gauge onto the sample plate. Lay aside for about 5 minutes, when the reading gets stable, the water activity can be obtained. 4.3 After testing, press and hold the power key for about 3 seconds to turn off the gauge. Clean the sample plate for next use .
- READING CORRECTION------When it is necessary to correct the reading value, press and hold the Power Key for about 7 seconds. Then release the key when the signal Cor , comes out on the display. There will be a decimal number with two places, which is the correction value. Then open the battery cover on the back, there are 2 small hole below the battery slot. Use a small hard bar (such as screwdriver) to slightly touch the key inside, the correction value will be increased or decreased .
- Product Feature-----The VTS-160A can be used to measure the water activity of foods. No matter when and where you need to measure water activity, VTS-160A water activity meter is your unique choice. This is a real portable water activity meter, with a weight of only 100 grams, lighter than a mobile phone, and a precision of 0.02 aw, easy to measure water activity anytime and anywhere .
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 9.84 x 15.75 x 3.94 Inches | Weight: 0.50 Kilograms
See On Amazon #6
Soil Moisture Meter Tester with LCD Display Sand Soil Moisture Analyzer
Asin: B07142XXVX | Ean: 0647904231132 | UPC: 647904231132
★ Multi Gear Set To Measure The Water Content Of Different Substances..
★ This Instrument Adopted The High Frequency Principle Based On The Introduction Of The Most Advanced Technology From Foreign Country.
★ Low Power Consumption Technology Is Adopted In The Design Of The Instrument.
★ Digital Display With Back Light Gives Exact And Clearly Reading Although You Stay At The Somber Conditions..
Features
- It is portable, compact, easy to use and the moisture measurement readings are instant.
- Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
- Multi gear set to measure the water content of different substances.
- Low power consumption technology is adopted in the design of the instrument
- This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VETUS INSTRUMENTS
See On Amazon #7
High Voltage Insulation Tester Insulation Resistance Tester Kit 10 Teraohms Resistance 10kV Voltage
Asin: B08CZFV61P | Ean: 0797550904895 | UPC: 797550904895
Rated Voltage：250V~10Kv（6 Gears） Step Test Mode(Step) Ramp Test Mode (Ramp) Custom Setting Output Voltage Custom Setting Test Time 10S~60Min.
Insulation Resistance Measurement (Ir); Polarization Index Measurement (Pi); Absorption Ratio (Dar);Ramp Test Mode (Ramp); Filtered Resistance Test (Fr); Voltage Measurement(V); Capacity Measurement（Uf）; Current Measurement（Na）.
Output Shout Circuit Current：≥5Ma Voltage Monitor Function, Test Timer Function , Automatic Discharge Function Large Capacity Rechargeable Lithium Battery Usb Communication Bluetooth Communication.
Insulation Resistance Range：0.5Mω～10Tω Max Short Circuit Current 5Ma Polarization Index Test（Pi）Dielectric Absorption Ratio Test（Dar）.
Features
- Suitable for insulation resistance testing of cable, motor, generator, transformer, mutual inductor, high voltage switch, arrester and other large equipment.
- Insulation Resistance Range 0.5M 10T Max Short Circuit Current 5mA Polarization Index Test PI Dielectric Absorption Ratio Test DAR
- Rated Voltage 250v~10Kv 6 gears Step Test Mode(STEP) Ramp Test Mode (RAMP) Custom Setting Output Voltage Custom Setting Test Time 10s~60min
- Output Shout Circuit Current 5mA Voltage monitor function, Test timer function , Automatic discharge function Large Capacity Rechargeable Lithium Battery USB Communication Bluetooth Communication
- Insulation resistance measurement (IR); polarization index measurement (PI); absorption ratio (DAR);Ramp Test Mode (RAMP); filtered resistance test (FR); Voltage measurement(V); capacity measurement uF ; current measurement nA
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches | Weight: 9.70 pounds
See On Amazon #8
VTSYIQI Water Activity Tester Monitor Portable Water Activity Meter for Food Jerky Dried Fruit Vegetable AW Monitor Range 0 to 1.0AW Accuracy 0.02AW LCD Digital Display
Asin: B07KPS5R2H | Model: VTS60A | PartNumber: VTS60A | Ean: 0681013844623 | UPC: 681013844623
Measuring Procedure------4.1 Press The Power Key To Switch On The Power And The Gauge Enters The Auto Mode Which Can Automatically Test The Water Activity. 4.2 Put The Samples Into The Sample Plate, And Then Cover The Of The Gauge Onto The Sample Plate. Lay Aside For About 5 Minutes, When The Reading Gets Stable, The Water Activity Can Be Obtained. 4.3 After Testing, Press And Hold The Power Key For About 3 Seconds To Turn Off The Gauge. Clean The Sample Plate For Next Use.
Product Feature-----The Wa-160A Can Be Used To Measure The Water Activity Of Foods. No Matter When And Where You Need To Measure Water Activity, Wa-160A Water Activity Meter Is Your Unique Choice. This Is A Real Portable Water Activity Meter, With A Weight Of Only 100 Grams, Lighter Than A Mobile Phone, And A Precision Of 0.02 Aw, Easy To Measure Water Activity Anytime And Anywhere.
Reading Correction------When It Is Necessary To Correct The Reading Value, Press And Hold The Power Key For About 7 Seconds. Then Release The Key When The Signal ‘Cor’, Comes Out On The Display. There Will Be A Decimal Number With Two Places, Which Is The Correction Value. Then Open The Battery Cover On The Back, There Are 2 Small Hole Below The Battery Slot. Use A Small Hard Bar (Such As Screwdriver) To Slightly Touch The Key Inside, The Correction Value Will Be Increased Or Decreased.
Technical Parameters-----Display: 6 Bit Backlight Lcd Digital Display, 3 Bit Humidity Aw, 3 Bit Temperature Display Range: 0~1.0Aw Resolution: ±0.01Aw Accuracy: ±0.02Aw : Non Conductive Humidity Sampling Time: 5 Minutes Operating Condition: Temp: 0~50°C (32~122°F) Humidity: <95%Rh Power Supply: 2X1.5V Aaa Um-4 Battery Size: 135X70x44mm Weight: 100G (Not Including Batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual.
Features
- Product Description-----The activity meter can measure bread, biscuits, cakes, puffed foods, snack foods, dehydrated foods, dried fruits, meat clams, preserved fruits, etc. It mainly reflects the amount of free water in the state of food balance, the stability of food and the possibility of microbial reproduction, and the chemical, enzyme and physical changes that can cause the change of food quality. It is often used to measure the dryness enduring ability of the microorganisms
- Technical Parameters-----Display: 6 bit backlight LCD digital display, 3 bit humidity aw, 3 bit temperature display Range: 0~1.0aw Resolution: 0.01aw Accuracy: 0.02aw : Non conductive humidity Sampling Time: 5 Minutes Operating condition: Temp: 0~50 C (32~122 F) Humidity: <95%RH Power supply: 2x1.5V AAA Um-4 Battery Size: 135x70x44mm Weight: 100g (Not including batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual
- Measuring Procedure------4.1 Press the power key to switch on the power and the gauge enters the auto mode which can automatically test the water activity. 4.2 Put the samples into the sample plate, and then cover the of the gauge onto the sample plate. Lay aside for about 5 minutes, when the reading gets stable, the water activity can be obtained. 4.3 After testing, press and hold the power key for about 3 seconds to turn off the gauge. Clean the sample plate for next use
- READING CORRECTION------When it is necessary to correct the reading value, press and hold the Power Key for about 7 seconds. Then release the key when the signal Cor , comes out on the display. There will be a decimal number with two places, which is the correction value. Then open the battery cover on the back, there are 2 small hole below the battery slot. Use a small hard bar (such as screwdriver) to slightly touch the key inside, the correction value will be increased or decreased
- Product Feature-----The WA-160A can be used to measure the water activity of foods. No matter when and where you need to measure water activity, WA-160A water activity meter is your unique choice. This is a real portable water activity meter, with a weight of only 100 grams, lighter than a mobile phone, and a precision of 0.02 aw, easy to measure water activity anytime and anywhere
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 9.84 x 15.75 x 3.94 Inches | Weight: 0.50 Kilograms
See On Amazon #9
VTSYIQI High Voltage Insulation Tester 5kv Insulation Resistance Tester with Rated Voltage 100V 250V 500V 1000V 2500V 5000V Range 0.01M -10T Resolution 0.01M for Motors Cables Electrical Equipment
Asin: B0CW9NGGFQ | Model: 658362357647 | PartNumber: 658362357647 | Ean: 0658362357647 | UPC: 658362357647
Capacitance---Capacitance:10Nf～50Ufresolution: 10Nf Output Short-Circuit Current:≥6Ma@15Kv Absorption Ratio And Polarization Index Measurement:Have Power Supply:12.6V Rechargeable Battery Backlight:Controllable Gray Screen Backlight, Suitable For Use In Dim Places.
6 Voltage Levels---Digital Insulation Resistance Meter Consists Of Medium And Large Scale Integrated Circuits. The Output Power Of The Watch Is Large, And The Output Voltage Level Is A Lot (With 6 Voltage Levels). Dc Voltage Measurement Range Is 0 ～ 1000V, Ac Voltage Measurement Range Is 0 ～ 750V. Dc Current Measurement Range Is 100Pa-6Ma. Capacitance Measurement Range Is 10Nf-50Nf..
Weight---Instrument Weight:2750G(Including Battery) Battery Voltage:When The Battery Voltage Is Low, Low Battery Symbol “ ”Will Display Automatic Shut-Down:Automatic Shutdown After 15 Minutes Boot Insulation Resistance:≥50Mω(Between Measuring Line And Housing) Pressure Resistance:Ac3kv/50Hz 1Min.
Working Environment--Working Temperature And Humidity:－10℃～+50℃＜85%Rh Storage Temperature And Humidity:－15℃～+55℃＜90%Rh Suitable For Safety Regulations:Iec61010-1、Iec1010-2-31、Iec61557-1,5、Iec60529(Ip54)、Pollution Grade 2、Cat ⅲ 300V.
Usb Connect---Communication Line:Usb Communication Line 1Pc Test Line:High Voltage Rob Red 3Meter, High Voltage Test Line Black 1.5Meter, Green 1.5Meter Data Storage:500 Groups, "Full" Symbol Indicates That Storage Is Full Data Review:Data Review Function: "Mr" Symbol Display.
Overflow Display---Exceed Measurement Range Overflow Function: “> ” Symbol Display Alarm Function:Alarm When The Measured Value Larger Or Smaller Than The Alarm Setting Value Power Consumption:Standby: 30Ma Max(Backlight Off), Turn On Backlight: 42Ma Max Measure:200Ma Max(Backlight Off).
Dispaly---Dispaly Mode:4-Bit Large Lcd Display, Gray Screen Backlight Lcd Display Size:108Mm×65Mm Instrument Size:L/W/H：240Mm×188Mm×85Mm Usb Interface:With Usb Interface, Software Monitoring, Storage Data Can Be Uploaded To The Computer, Save And Print.
Application---Digital Insulation Resistance Meter Also Known As Megohmmeter, High Voltage Insulation Resistance Tester, Etc., For The Insulation Resistance Test. The Instrument Has A Large Lcd Screen Gray Backlight Display, Data Storage, Data Access, Alarm, Automatic Shutdown And Other Functions. At The Same Time, It Also Has The Function Of Measuring Dc Voltage, Ac Voltage, Absorption Ratio And Polarization Index Of Dc Voltage. The Machine Is Beautiful And Upscale, Has A Wide Range, High Resolution, Convenient Operation, Easy To Carry, Accurate, Reliable, Stable Performance, Strong Anti-Interference Ability..
Test Voltage---Test Voltage(V):Rated Voltage×（1±10%） Dc Voltage Range:0～1000V Resolution: 0.1Vac Voltage Range:0～750V Resolution: 0.1V Dc Current:0.1Na～6Ma Resolution: 0.1Na.
Features
- Function---Insulation resistance tester, voltage test, DC current test, capacitance test Basic condition:23 5 below 75%rh Rated voltage:100V 250V 500V 1000V 2500V 5000V Insulation resistance range:0.01M 10T resolution 0.01M
- Test Voltage---Test Voltage(V):rated voltage 1 10% DC Voltage Range:0 1000V Resolution: 0.1VAC Voltage Range:0 750V Resolution: 0.1V DC Current:0.1nA 6mA Resolution: 0.1nA
- Capacitance---Capacitance:10nF 50uFResolution: 10nF Output short-circuit Current: 6mA@15KV Absorption Ratio and Polarization Index Measurement:Have Power Supply:12.6V rechargeable battery Backlight:Controllable gray screen backlight, suitable for use in dim places
- Dispaly---Dispaly mode:4-bit large LCD display, gray screen backlight LCD display size:108mm 65mm Instrument size:L/W/H 240mm 188mm 85mm USB interface:With USB interface, software monitoring, storage data can be uploaded to the computer, save and print
- USB Connect---Communication Line:USB communication line 1PC Test Line:High voltage rob red 3meter, high voltage test line black 1.5meter, green 1.5meter Data Storage:500 groups, FULL symbol indicates that storage is full Data Review:Data review function: MR symbol display
- Overflow Display---Exceed measurement range overflow function: > symbol display Alarm Function:Alarm when the measured value larger or smaller than the alarm setting value Power Consumption:Standby: 30mA Max(backlight off), Turn on backlight: 42mA Max Measure:200mA Max(backlight off)
- Weight---Instrument weight:2750g(including battery) Battery voltage:When the battery voltage is low, low battery symbol will display Automatic shut-down:automatic shutdown after 15 minutes boot Insulation Resistance: 50M (between Measuring line and housing) Pressure Resistance:AC3kV/50Hz 1min
- Working environment--Working Temperature and Humidity: 10 +50 85%RH Storage Temperature and Humidity: 15 +55 90%RH Suitable for Safety Regulations:IEC61010-1 IEC1010-2-31 IEC61557-1,5 IEC60529(IP54) pollution grade 2 CAT 300V
- Application---Digital insulation resistance meter also known as megohmmeter, high voltage insulation resistance tester, etc., for the insulation resistance test. The instrument has a large LCD screen gray backlight display, data storage, data access, alarm, automatic shutdown and other functions. At the same time, it also has the function of measuring DC voltage, AC voltage, absorption ratio and polarization index of DC voltage. The machine is beautiful and upscale, has a wide range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, strong anti-interference ability.
- 6 voltage levels---Digital insulation resistance meter consists of medium and large scale integrated circuits. The output power of the watch is large, and the output voltage level is a lot (with 6 voltage levels). DC voltage measurement range is 0 1000V, AC voltage measurement range is 0 750V. DC current measurement range is 100pA-6mA. Capacitance measurement range is 10nF-50nF.
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI658362357647
Dimensions: 7.87 x 15.75 x 5.91 Inches | Weight: 0.61 Pounds
See On Amazon #10
Digital Gaussmeter Teslameter Digital AC/DC Magnetic Field Gauss Meter With Range 0-200mT-2000mT 0.01mT 0.1mT Sensitivity DC~200HZ Frequency magnetic field LED display
Asin: B07BWCXMXC | Ean: 0665059207383 | UPC: 665059207383
Sensitivity 0.01Mt, 0.1Mt.
Application Examples Magnet Surface Magnetic Field, Ferromagnetic Material Surface Magnetic Field, Dc Motor, Speakers, Magnetic Separator, Permanent Magnetic Separator Of The Surface Magnetic Field, The Exchange Frequency Magnetic Field, Magnetic Field Induction Cooker Work.
Measured Magnetic Field Dc Andac Frequency Magnetic Field Dc~200Hz.
Accuracy ±2%,±3 Words; ±5%,±5 Words(1000Mt).
Features
- Range 0~200mT~2000mT
- Accuracy 2%, 3 words; 5%, 5 words(1000mT)
- Sensitivity 0.01mT, 0.1mT
- Measured magnetic field DC andAC Frequency magnetic field DC~200HZ
- Application Examples Magnet surface magnetic field, ferromagnetic material surface magnetic field, DC motor, speakers, magnetic separator, permanent magnetic separator of the surface magnetic field, the exchange frequency magnetic field, magnetic field induction cooker work
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
See On Amazon #11
VTSYIQI 5KV Insulation Resistance Tester High Voltage Insulation Tester with Range 5KV 10T Resolution 0.01M for Insulation Resistance Voltage DC Current Capacitance Test 500 Groups Data Storage
Asin: B0CW9SV48X | Model: 658362357661 | PartNumber: 658362357661 | Ean: 0658362357661 | UPC: 658362357661
Capacitance---Capacitance:10Nf～50Ufresolution: 10Nf Output Short-Circuit Current:≥6Ma@15Kv Absorption Ratio And Polarization Index Measurement:Have Power Supply:12.6V Rechargeable Battery Backlight:Controllable Gray Screen Backlight, Suitable For Use In Dim Places.
6 Voltage Levels---Digital Insulation Resistance Meter Consists Of Medium And Large Scale Integrated Circuits. The Output Power Of The Watch Is Large, And The Output Voltage Level Is A Lot (With 6 Voltage Levels). Dc Voltage Measurement Range Is 0 ～ 1000V, Ac Voltage Measurement Range Is 0 ～ 750V. Dc Current Measurement Range Is 100Pa-6Ma. Capacitance Measurement Range Is 10Nf-50Nf..
Weight---Instrument Weight:2750G(Including Battery) Battery Voltage:When The Battery Voltage Is Low, Low Battery Symbol “ ”Will Display Automatic Shut-Down:Automatic Shutdown After 15 Minutes Boot Insulation Resistance:≥50Mω(Between Measuring Line And Housing) Pressure Resistance:Ac3kv/50Hz 1Min.
Working Environment--Working Temperature And Humidity:－10℃～+50℃＜85%Rh Storage Temperature And Humidity:－15℃～+55℃＜90%Rh Suitable For Safety Regulations:Iec61010-1、Iec1010-2-31、Iec61557-1,5、Iec60529(Ip54)、Pollution Grade 2、Cat ⅲ 300V.
Usb Connect---Communication Line:Usb Communication Line 1Pc Test Line:High Voltage Rob Red 3Meter, High Voltage Test Line Black 1.5Meter, Green 1.5Meter Data Storage:500 Groups, "Full" Symbol Indicates That Storage Is Full Data Review:Data Review Function: "Mr" Symbol Display.
Overflow Display---Exceed Measurement Range Overflow Function: “> ” Symbol Display Alarm Function:Alarm When The Measured Value Larger Or Smaller Than The Alarm Setting Value Power Consumption:Standby: 30Ma Max(Backlight Off), Turn On Backlight: 42Ma Max Measure:200Ma Max(Backlight Off).
Dispaly---Dispaly Mode:4-Bit Large Lcd Display, Gray Screen Backlight Lcd Display Size:108Mm×65Mm Instrument Size:L/W/H：240Mm×188Mm×85Mm Usb Interface:With Usb Interface, Software Monitoring, Storage Data Can Be Uploaded To The Computer, Save And Print.
Application---Digital Insulation Resistance Meter Also Known As Megohmmeter, High Voltage Insulation Resistance Tester, Etc., For The Insulation Resistance Test. The Instrument Has A Large Lcd Screen Gray Backlight Display, Data Storage, Data Access, Alarm, Automatic Shutdown And Other Functions. At The Same Time, It Also Has The Function Of Measuring Dc Voltage, Ac Voltage, Absorption Ratio And Polarization Index Of Dc Voltage. The Machine Is Beautiful And Upscale, Has A Wide Range, High Resolution, Convenient Operation, Easy To Carry, Accurate, Reliable, Stable Performance, Strong Anti-Interference Ability..
Test Voltage---Test Voltage(V):Rated Voltage×（1±10%） Dc Voltage Range:0～1000V Resolution: 0.1Vac Voltage Range:0～750V Resolution: 0.1V Dc Current:0.1Na～6Ma Resolution: 0.1Na.
Features
- Function---Insulation resistance tester, voltage test, DC current test, capacitance test Basic condition:23 5 below 75%rh Rated voltage:100V 250V 500V 1000V 2500V 5000V Insulation resistance range:0.01M 10T resolution 0.01M
- Test Voltage---Test Voltage(V):rated voltage 1 10% DC Voltage Range:0 1000V Resolution: 0.1VAC Voltage Range:0 750V Resolution: 0.1V DC Current:0.1nA 6mA Resolution: 0.1nA
- Capacitance---Capacitance:10nF 50uFResolution: 10nF Output short-circuit Current: 6mA@15KV Absorption Ratio and Polarization Index Measurement:Have Power Supply:12.6V rechargeable battery Backlight:Controllable gray screen backlight, suitable for use in dim places
- Dispaly---Dispaly mode:4-bit large LCD display, gray screen backlight LCD display size:108mm 65mm Instrument size:L/W/H 240mm 188mm 85mm USB interface:With USB interface, software monitoring, storage data can be uploaded to the computer, save and print
- USB Connect---Communication Line:USB communication line 1PC Test Line:High voltage rob red 3meter, high voltage test line black 1.5meter, green 1.5meter Data Storage:500 groups, FULL symbol indicates that storage is full Data Review:Data review function: MR symbol display
- Overflow Display---Exceed measurement range overflow function: > symbol display Alarm Function:Alarm when the measured value larger or smaller than the alarm setting value Power Consumption:Standby: 30mA Max(backlight off), Turn on backlight: 42mA Max Measure:200mA Max(backlight off)
- Weight---Instrument weight:2750g(including battery) Battery voltage:When the battery voltage is low, low battery symbol will display Automatic shut-down:automatic shutdown after 15 minutes boot Insulation Resistance: 50M (between Measuring line and housing) Pressure Resistance:AC3kV/50Hz 1min
- Working environment--Working Temperature and Humidity: 10 +50 85%RH Storage Temperature and Humidity: 15 +55 90%RH Suitable for Safety Regulations:IEC61010-1 IEC1010-2-31 IEC61557-1,5 IEC60529(IP54) pollution grade 2 CAT 300V
- Application---Digital insulation resistance meter also known as megohmmeter, high voltage insulation resistance tester, etc., for the insulation resistance test. The instrument has a large LCD screen gray backlight display, data storage, data access, alarm, automatic shutdown and other functions. At the same time, it also has the function of measuring DC voltage, AC voltage, absorption ratio and polarization index of DC voltage. The machine is beautiful and upscale, has a wide range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, strong anti-interference ability.
- 6 voltage levels---Digital insulation resistance meter consists of medium and large scale integrated circuits. The output power of the watch is large, and the output voltage level is a lot (with 6 voltage levels). DC voltage measurement range is 0 1000V, AC voltage measurement range is 0 750V. DC current measurement range is 100pA-6mA. Capacitance measurement range is 10nF-50nF.
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI658362357661
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #12
VTSYIQI Digital Glossmeter 60 Degree Gloss Tester Single Angle Portable Gloss Tester Meter with 60 Degree Measuring Range 0 to 1000GU
Asin: B073PWQM8D | Ean: 0647904234515 | UPC: 647904234515
★ Test Angle: 60°,Range: 0-1000Gu.
★ High Stability, High Precision.
★ Working Temperature: 0-40℃, Humidity: <85%, No Condensation.
★ Attractive Appearance, Convenient Carrying.
Features
- Simple structure and easy to operate
- Attractive appearance, convenient carrying
- Test Angle: 60 ,range: 0-1000GU
- Working temperature: 0-40 , humidity: <85%, no condensation
- High Stability, High Precision
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VETUS INSTRUMENTS
Dimensions: 7.09 x 7.87 x 3.94 Inches
See On Amazon #13
VTSYIQI Digital Concrete Rebound Hammer Tester Resiliometer Concrete Tester NDT Concrete Strength Hardness Tester Schmidt Resiliometer with OLCD Display 200 Standard Component Storage
Asin: B07FTGM71Y | Ean: 0665059411087 | UPC: 665059411087
★ 5)Adopting Non-Contact Reflection Grating Sensor, Maximum Avoid Machine Attrition And Poor Contact In Traditional Technologies Such As Contact Way Or Potentiometer Way, High Precision, Long Service Life, And The Traditional Pointer Scale Is Kept. 6)The Instrument Is Powered By A Built-In Rechargeable Lithium Battery, Which Can Operate Continuously For More Than 10 Hours.
★ 9)Adopting Usb Interface, As U Flash Disk, No Need Special Driver. 10)Have Real-Time Clock Calendar Function, Can Automatically Record Test Date. 11)Advanced Low Power Consumption Function, Can Set Display Backlight Level, Auto Dormancy, And Automatic Turn Off..
★ 7)Large Storage Capacity, More Than 200 Standard Components, A Standard Component Including Almost 50 Test Areas, One Test Areas Including 16 Test Pointes, Completely Meet The Request Of Long Time In Site Test. 8)Testing Parameters Can Be Typed In Test Site..
★ 3)Using Sensitive Operation Touch Keys. The Keys Are Not Easy To Aging. 4)Automatic Recording Function Improves The Efficiency Of Measurement..
Features
- 1)Integrated wireless structure of the test hammer host and the displayer part. Easy to carry and make work efficient. 2)OLCD displayer English interface and friendly operation.
- 3)Using sensitive operation touch keys. The keys are not easy to aging. 4)Automatic recording function improves the efficiency of measurement.
- 5)Adopting non-contact reflection grating sensor, maximum avoid machine attrition and poor contact in traditional technologies such as contact way or potentiometer way, high precision, long service life, and the traditional pointer scale is kept. 6)The instrument is powered by a built-in rechargeable lithium battery, which can operate continuously for more than 10 hours
- 7)Large storage capacity, more than 200 standard components, a standard component including almost 50 test areas, one test areas including 16 test pointes, completely meet the request of long time in site test. 8)Testing parameters can be typed in test site.
- 9)Adopting USB interface, as U flash disk, no need special driver. 10)Have real-time clock calendar function, can automatically record test date. 11)Advanced low power consumption function, can set display backlight level, auto dormancy, and automatic turn off.
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 1.97 x 9.84 x 5.91 Inches | Weight: 2.43 pounds
See On Amazon #14
VTSYIQI Digital Concrete Rebound Hammer Tester Gauge Concrete Rebound Test Hammer NDT Schmidt Resiliometer with 200 Standard Component Storage OLCD Display
Asin: B0CJC2LKC7
★ 5)Adopting Non-Contact Reflection Grating Sensor, Maximum Avoid Machine Attrition And Poor Contact In Traditional Technologies Such As Contact Way Or Potentiometer Way, High Precision, Long Service Life, And The Traditional Pointer Scale Is Kept. 6)The Instrument Is Powered By A Built-In Rechargeable Lithium Battery, Which Can Operate Continuously For More Than 10 Hours.
★ 9)Adopting Usb Interface, As U Flash Disk, No Need Special Driver. 10)Have Real-Time Clock Calendar Function, Can Automatically Record Test Date. 11)Advanced Low Power Consumption Function, Can Set Display Backlight Level, Auto Dormancy, And Automatic Turn Off..
★ 7)Large Storage Capacity, More Than 200 Standard Components, A Standard Component Including Almost 50 Test Areas, One Test Areas Including 16 Test Pointes, Completely Meet The Request Of Long Time In Site Test. 8)Testing Parameters Can Be Typed In Test Site..
★ 3)Using Sensitive Operation Touch Keys. The Keys Are Not Easy To Aging. 4)Automatic Recording Function Improves The Efficiency Of Measurement..
Features
- 1)Integrated wireless structure of the test hammer host and the displayer part. Easy to carry and make work efficient. 2)OLCD displayer English interface and friendly operation.
- 3)Using sensitive operation touch keys. The keys are not easy to aging. 4)Automatic recording function improves the efficiency of measurement.
- 5)Adopting non-contact reflection grating sensor, maximum avoid machine attrition and poor contact in traditional technologies such as contact way or potentiometer way, high precision, long service life, and the traditional pointer scale is kept. 6)The instrument is powered by a built-in rechargeable lithium battery, which can operate continuously for more than 10 hours
- 7)Large storage capacity, more than 200 standard components, a standard component including almost 50 test areas, one test areas including 16 test pointes, completely meet the request of long time in site test. 8)Testing parameters can be typed in test site.
- 9)Adopting USB interface, as U flash disk, no need special driver. 10)Have real-time clock calendar function, can automatically record test date. 11)Advanced low power consumption function, can set display backlight level, auto dormancy, and automatic turn off.
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI202309191618
See On Amazon #15
VTSYIQI Water Activity Meter Tester Analyzer Monitor Tools For Food Water Activity Meters Monitor 0 to 1.0AW Accuracy 0.02aw USB Data Cable with Software LCD Digital Display
Asin: B07RB45VRV | Ean: 0682141323332 | UPC: 682141323332
Measuring Procedure------4.1 Press The Power Key To Switch On The Power And The Gauge Enters The Auto Mode Which Can Automatically Test The Water Activity. 4.2 Put The Samples Into The Sample Plate, And Then Cover The Of The Gauge Onto The Sample Plate. Lay Aside For About 5 Minutes, When The Reading Gets Stable, The Water Activity Can Be Obtained. 4.3 After Testing, Press And Hold The Power Key For About 3 Seconds To Turn Off The Gauge. Clean The Sample Plate For Next Use ..
Product Feature-----The Vts-160A Can Be Used To Measure The Water Activity Of Foods. No Matter When And Where You Need To Measure Water Activity, Vts-160A Water Activity Meter Is Your Unique Choice. This Is A Real Portable Water Activity Meter, With A Weight Of Only 100 Grams, Lighter Than A Mobile Phone, And A Precision Of 0.02 Aw, Easy To Measure Water Activity Anytime And Anywhere ..
Reading Correction------When It Is Necessary To Correct The Reading Value, Press And Hold The Power Key For About 7 Seconds. Then Release The Key When The Signal ‘Cor’, Comes Out On The Display. There Will Be A Decimal Number With Two Places, Which Is The Correction Value. Then Open The Battery Cover On The Back, There Are 2 Small Hole Below The Battery Slot. Use A Small Hard Bar (Such As Screwdriver) To Slightly Touch The Key Inside, The Correction Value Will Be Increased Or Decreased ..
Technical Parameters-----Display: 6 Bit Backlight Lcd Digital Display, 3 Bit Humidity Aw, 3 Bit Temperature Display Range: 0~1.0Aw Resolution: ±0.01Aw Accuracy: ±0.02Aw : Non Conductive Humidity Sampling Time: 5 Minutes Operating Condition: Temp: 0~50°C (32~122°F) Humidity: <95%Rh Power Supply: 2X1.5V Aaa Um-4 Battery Size: 135X70x44mm Weight: 100G (Not Including Batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual ..
Features
- Product Description-----The activity meter can measure bread, biscuits, cakes, puffed foods, snack foods, dehydrated foods, dried fruits, meat clams, preserved fruits, etc. It mainly reflects the amount of free water in the state of food balance, the stability of food and the possibility of microbial reproduction, and the chemical, enzyme and physical changes that can cause the change of food quality. It is often used to measure the dryness enduring ability of the microorganisms .
- Technical Parameters-----Display: 6 bit backlight LCD digital display, 3 bit humidity aw, 3 bit temperature display Range: 0~1.0aw Resolution: 0.01aw Accuracy: 0.02aw : Non conductive humidity Sampling Time: 5 Minutes Operating condition: Temp: 0~50 C (32~122 F) Humidity: <95%RH Power supply: 2x1.5V AAA Um-4 Battery Size: 135x70x44mm Weight: 100g (Not including batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual .
- Measuring Procedure------4.1 Press the power key to switch on the power and the gauge enters the auto mode which can automatically test the water activity. 4.2 Put the samples into the sample plate, and then cover the of the gauge onto the sample plate. Lay aside for about 5 minutes, when the reading gets stable, the water activity can be obtained. 4.3 After testing, press and hold the power key for about 3 seconds to turn off the gauge. Clean the sample plate for next use .
- READING CORRECTION------When it is necessary to correct the reading value, press and hold the Power Key for about 7 seconds. Then release the key when the signal Cor , comes out on the display. There will be a decimal number with two places, which is the correction value. Then open the battery cover on the back, there are 2 small hole below the battery slot. Use a small hard bar (such as screwdriver) to slightly touch the key inside, the correction value will be increased or decreased .
- Product Feature-----The VTS-160A can be used to measure the water activity of foods. No matter when and where you need to measure water activity, VTS-160A water activity meter is your unique choice. This is a real portable water activity meter, with a weight of only 100 grams, lighter than a mobile phone, and a precision of 0.02 aw, easy to measure water activity anytime and anywhere .
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI
Dimensions: 9.84 x 15.75 x 3.94 Inches
See On Amazon #16
VTSYIQI Digital Rebar Locator NDT Rebar Scanner Concrete Reinforcement Position Tester Detector with USB Interface 2 Error 6-50mm Rebar Diameter 6mm-90mm 7mm-200mm Protective Layer Thickness Range
Asin: B0D2W478JQ | Model: VTSYIQI20240428164242VTSYIQI | PartNumber: VTSYIQI20240428164242VTSYIQI
(3)Rebar Detector For Measuring Concrete Protective Layer Thickness (Protective Layer Thickness Can Be Calibrated)；Positioning Of Reinforcement；Estimated Rebar Diameter；Test Rebar Spacing, Display Rebar Grid Layout (Plans And Sections).
(5)Brightness Adjustment, According To The External Environment Lighting Degree, Backlight Brightness Level Selection, Eight Gear Adjustable.
(6)Multi-Function Concrete Rebar Detector Rebar Finder Data Can Be Exported From A Usb Flash Drive.
(4)Ndt Rebar Scanner Concrete Rebar Scanner Power Supply: Built-In Chargeable Lithium Battery,Power Supply Time Up To 50 Hours.
(2)Rebar Locator Maximum Allowederror:±1 Rebar Standard.
Features
- (1)Rebar scanner Applicable range: 6mm~ 50mm
- (2)Rebar locator Maximum allowederror: 1 rebar standard
- (3)Rebar detector For Measuring concrete protective layer thickness (protective layer thickness can be calibrated) Positioning of reinforcement Estimated rebar diameter Test rebar spacing, display rebar grid layout (plans and sections)
- (4)NDT Rebar Scanner Concrete rebar scanner Power Supply: Built-in chargeable lithium battery,power supply time up to 50 hours
- (5)Brightness adjustment, according to the external environment lighting degree, backlight brightness level selection, eight gear adjustable
- (6)Multi-Function Concrete Rebar Detector Rebar finder Data can be exported from a USB flash drive
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240428164242VTSYIQI
See On Amazon #17
VTSYIQI Rebar Finder Concrete Reinforcement Detector NDT Test with 2 Rebar Error Range 6mm- 50mm for Measuring Concrete Protective Layer Thickness USB Interface
Asin: B0D2R5QQZ2 | Model: VTSYIQI20240426148888VTSYIQI | PartNumber: VTSYIQI20240426148888VTSYIQI
(3)Rebar Detector For Measuring Concrete Protective Layer Thickness (Protective Layer Thickness Can Be Calibrated)；Positioning Of Reinforcement；Estimated Rebar Diameter；Test Rebar Spacing, Display Rebar Grid Layout (Plans And Sections).
(5)Brightness Adjustment, According To The External Environment Lighting Degree, Backlight Brightness Level Selection, Eight Gear Adjustable.
(6)Multi-Function Concrete Rebar Detector Rebar Finder Data Can Be Exported From A Usb Flash Drive.
(4)Ndt Rebar Scanner Concrete Rebar Scanner Power Supply: Built-In Chargeable Lithium Battery,Power Supply Time Up To 50 Hours.
(2)Rebar Locator Maximum Allowederror:±1 Rebar Standard.
Features
- (1)Rebar scanner Applicable range: 6mm~ 50mm
- (2)Rebar locator Maximum allowederror: 1 rebar standard
- (3)Rebar detector For Measuring concrete protective layer thickness (protective layer thickness can be calibrated) Positioning of reinforcement Estimated rebar diameter Test rebar spacing, display rebar grid layout (plans and sections)
- (4)NDT Rebar Scanner Concrete rebar scanner Power Supply: Built-in chargeable lithium battery,power supply time up to 50 hours
- (5)Brightness adjustment, according to the external environment lighting degree, backlight brightness level selection, eight gear adjustable
- (6)Multi-Function Concrete Rebar Detector Rebar finder Data can be exported from a USB flash drive
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240426148888VTSYIQI
See On Amazon #18
VTSYIQI NDT Rebar Scanner Digital Rebar Locator with USB Protective Layer Thickness Range 6mm- 90mm 7mm-200mm Rebar Diameter Range 6-50mm for Deep Concrete Scanner NDT Testing Steel Bar Scanner
Asin: B0D2R4F27S | Model: VTSYIQI20240426145353VTSYIQI | PartNumber: VTSYIQI20240426145353VTSYIQI
(3)Rebar Detector For Measuring Concrete Protective Layer Thickness (Protective Layer Thickness Can Be Calibrated)；Positioning Of Reinforcement；Estimated Rebar Diameter；Test Rebar Spacing, Display Rebar Grid Layout (Plans And Sections).
(5)Brightness Adjustment, According To The External Environment Lighting Degree, Backlight Brightness Level Selection, Eight Gear Adjustable.
(6)Multi-Function Concrete Rebar Detector Rebar Finder Data Can Be Exported From A Usb Flash Drive.
(4)Ndt Rebar Scanner Concrete Rebar Scanner Power Supply: Built-In Chargeable Lithium Battery,Power Supply Time Up To 50 Hours.
(2)Rebar Locator Maximum Allowederror:±1 Rebar Standard.
Features
- (1)Rebar scanner Applicable range: 6mm~ 50mm
- (2)Rebar locator Maximum allowederror: 1 rebar standard
- (3)Rebar detector For Measuring concrete protective layer thickness (protective layer thickness can be calibrated) Positioning of reinforcement Estimated rebar diameter Test rebar spacing, display rebar grid layout (plans and sections)
- (4)NDT Rebar Scanner Concrete rebar scanner Power Supply: Built-in chargeable lithium battery,power supply time up to 50 hours
- (5)Brightness adjustment, according to the external environment lighting degree, backlight brightness level selection, eight gear adjustable
- (6)Multi-Function Concrete Rebar Detector Rebar finder Data can be exported from a USB flash drive
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240426145353VTSYIQI
See On Amazon #19
VTSYIQI Concrete Rebar Scanner Concrete Reinforcement Detector with 2 Rebar Error Grid Scan Sectional Scan Function for Reinforcement Steel Bar Location Distribution Direction Diameter Testing USB
Asin: B0D2R3BP2G | Model: VTSYIQI202404261475263VTSYIQI | PartNumber: VTSYIQI202404261475263VTSYIQI
(3)Rebar Detector For Measuring Concrete Protective Layer Thickness (Protective Layer Thickness Can Be Calibrated)；Positioning Of Reinforcement；Estimated Rebar Diameter；Test Rebar Spacing, Display Rebar Grid Layout (Plans And Sections).
(5)Brightness Adjustment, According To The External Environment Lighting Degree, Backlight Brightness Level Selection, Eight Gear Adjustable.
(6)Multi-Function Concrete Rebar Detector Rebar Finder Data Can Be Exported From A Usb Flash Drive.
(4)Ndt Rebar Scanner Concrete Rebar Scanner Power Supply: Built-In Chargeable Lithium Battery,Power Supply Time Up To 50 Hours.
(2)Rebar Locator Maximum Allowederror:±1 Rebar Standard.
Features
- (1)Rebar scanner Applicable range: 6mm~ 50mm
- (2)Rebar locator Maximum allowederror: 1 rebar standard
- (3)Rebar detector For Measuring concrete protective layer thickness (protective layer thickness can be calibrated) Positioning of reinforcement Estimated rebar diameter Test rebar spacing, display rebar grid layout (plans and sections)
- (4)NDT Rebar Scanner Concrete rebar scanner Power Supply: Built-in chargeable lithium battery,power supply time up to 50 hours
- (5)Brightness adjustment, according to the external environment lighting degree, backlight brightness level selection, eight gear adjustable
- (6)Multi-Function Concrete Rebar Detector Rebar finder Data can be exported from a USB flash drive
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI202404261475263VTSYIQI
See On Amazon #20
VTSYIQI Rebar Detector NDT Concrete Rebar Locator with USB Interface Range 6mm- 50mm Rebar Error 4 for Reinforcement Detector Position Determination LCD Screen Lithium Battery
Asin: B0D2R33P14 | Model: VTSYIQI20240426147878VTSYIQI | PartNumber: VTSYIQI20240426147878VTSYIQI
(3)Rebar Detector For Measuring Concrete Protective Layer Thickness (Protective Layer Thickness Can Be Calibrated)；Positioning Of Reinforcement；Estimated Rebar Diameter；Test Rebar Spacing, Display Rebar Grid Layout (Plans And Sections).
(5)Brightness Adjustment, According To The External Environment Lighting Degree, Backlight Brightness Level Selection, Eight Gear Adjustable.
(6)Multi-Function Concrete Rebar Detector Rebar Finder Data Can Be Exported From A Usb Flash Drive.
(4)Ndt Rebar Scanner Concrete Rebar Scanner Power Supply: Built-In Chargeable Lithium Battery,Power Supply Time Up To 50 Hours.
(2)Rebar Locator Maximum Allowederror:±1 Rebar Standard.
Features
- (1)Rebar scanner Applicable range: 6mm~ 50mm
- (2)Rebar locator Maximum allowederror: 1 rebar standard
- (3)Rebar detector For Measuring concrete protective layer thickness (protective layer thickness can be calibrated) Positioning of reinforcement Estimated rebar diameter Test rebar spacing, display rebar grid layout (plans and sections)
- (4)NDT Rebar Scanner Concrete rebar scanner Power Supply: Built-in chargeable lithium battery,power supply time up to 50 hours
- (5)Brightness adjustment, according to the external environment lighting degree, backlight brightness level selection, eight gear adjustable
- (6)Multi-Function Concrete Rebar Detector Rebar finder Data can be exported from a USB flash drive
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240426147878VTSYIQI
See On Amazon #21
VTSYIQI Rebar Scanner NDT Rebar Locator with 6-50mm Rebar Diameter 6mm-90mm 7mm-200mm Protective Layer Thickness USB Interface for Protective Layer Thickness Positioning Diameter Space Grid Display
Asin: B0D2R1TRR4 | Model: VTSYIQI20240426143030VTSYIQI | PartNumber: VTSYIQI20240426143030VTSYIQI
(3)Rebar Detector For Measuring Concrete Protective Layer Thickness (Protective Layer Thickness Can Be Calibrated)；Positioning Of Reinforcement；Estimated Rebar Diameter；Test Rebar Spacing, Display Rebar Grid Layout (Plans And Sections).
(5)Brightness Adjustment, According To The External Environment Lighting Degree, Backlight Brightness Level Selection, Eight Gear Adjustable.
(6)Multi-Function Concrete Rebar Detector Rebar Finder Data Can Be Exported From A Usb Flash Drive.
(4)Ndt Rebar Scanner Concrete Rebar Scanner Power Supply: Built-In Chargeable Lithium Battery,Power Supply Time Up To 50 Hours.
(2)Rebar Locator Maximum Allowederror:±1 Rebar Standard.
Features
- (1)Rebar scanner Applicable range: 6mm~ 50mm
- (2)Rebar locator Maximum allowederror: 1 rebar standard
- (3)Rebar detector For Measuring concrete protective layer thickness (protective layer thickness can be calibrated) Positioning of reinforcement Estimated rebar diameter Test rebar spacing, display rebar grid layout (plans and sections)
- (4)NDT Rebar Scanner Concrete rebar scanner Power Supply: Built-in chargeable lithium battery,power supply time up to 50 hours
- (5)Brightness adjustment, according to the external environment lighting degree, backlight brightness level selection, eight gear adjustable
- (6)Multi-Function Concrete Rebar Detector Rebar finder Data can be exported from a USB flash drive
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240426143030VTSYIQI
See On Amazon #22
VTSYIQI Digital Four-Wire Ground Resistance Tester Digital Soil Resistivity Tester with Two Three Four Wire Soil Resistivity 9000k m 2000ohm USB Interface 300 Groups Data Storage
Asin: B0D2KZY2D3 | Model: VTSYIQI20240424160707VTSYIQI | PartNumber: VTSYIQI20240424160707VTSYIQI
Short-Circuit Test Current: Ac 20Ma Max.
Overflow Display：Exceeding Measuring Range Overflow Function: "Ol" Symbol Display.
Measuring Range: 0.00Ω~30.00Kω.
Testing Voltage: Ac 0.0~600V.
Features
- Data Storage 300sets
- Testing Voltage: AC 0.0~600V
- Short-circuit Test Current: AC 20mA max
- Measuring Range: 0.00 ~30.00K
- Overflow Display Exceeding measuring range overflow function: OL symbol display
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240424160707VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #23
VTSYIQI Four-Wire Grounding Resistance Meter Tester Digital Soil Resistivity Tester Measurement with 30.00K Resistance 9000K M Resistivity 600V Voltage Two Three Four Wire Method
Asin: B0D2KYC6VB | Model: VTSYIQI20240424161111VTSYIQI | PartNumber: VTSYIQI20240424161111VTSYIQI
Short-Circuit Test Current: Ac 20Ma Max.
Overflow Display：Exceeding Measuring Range Overflow Function: "Ol" Symbol Display.
Measuring Range: 0.00Ω~30.00Kω.
Testing Voltage: Ac 0.0~600V.
Features
- Data Storage 300sets
- Testing Voltage: AC 0.0~600V
- Short-circuit Test Current: AC 20mA max
- Measuring Range: 0.00 ~30.00K
- Overflow Display Exceeding measuring range overflow function: OL symbol display
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240424161111VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #24
VTSYIQI Difference
Asin: B0D2KNF6SD | Model: VTSYIQI202404240903424vtsyiqi | PartNumber: VTSYIQI202404240903424vtsyiqi
★On/Off Instant Boot, Auto Power Off.
★Probe Rod Length 195Mm , Sj-6 Wet Sponge Pinhole Leak Detector Is A Multi-Voltage Leak, It Is Applied Wet Sponge Testing Technology To Meet The New Standard Wet Sponge Leak Detector Design - That Is, High-Quality, Low-Voltage Leak. For Measuring The Conductive Substrate 500 Micron Pinhole Insulating Coating, Slit, Damage And Other Defects..
★Voltage Indication There Were Three Voltage Corresponding Led Lights Indicate.
★Sponge Size 170×70×30Mm.
Features
- Power consumption 0.5W
- Sponge size 170 70 30mm
- On/off Instant boot, auto power off
- Voltage indication There were three voltage corresponding led lights indicate
- probe rod length 195mm , SJ-6 wet sponge pinhole leak detector is a multi-voltage leak, it is applied wet sponge testing technology to meet the new standard wet sponge leak detector design - that is, high-quality, low-voltage leak. For measuring the conductive substrate 500 micron pinhole insulating coating, slit, damage and other defects.
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI202404240903424vtsyiqi
Dimensions: 3.94 x 7.87 x 1.97 Inches
See On Amazon #25
VTSYIQI Three-Wire Ground Resistance Tester Digital Earth Ground Resistance Meter with 3000 Resistance 100.0V AC Voltage USB Interface 500 Groups Data Storage Alarm Function
Asin: B0D25GG6DD | Model: VTSYIQI20240419133636VTSYIQI | PartNumber: VTSYIQI20240419133636VTSYIQI
The Digital Grounding Resistance Tester Consists Of Host, Monitoring Software, Test Line, Usb Cable, And Grounding Rod. It Has The Functions Of Reading, Checking, Saving, Reporting And Printing Of Historical Data..
2, 3-Wire Grounding Resistance, Grounding Voltage Measurement. Automatic Shift, Usb Interface, Data Upload Function, Alarm Function, Data Storage 500 Groups, Grounding Resistance Range: 0.00Ω ~ 3000Ω, Grounding Voltage Range: 0 ~ 100V.
Suitable For Telecommunications, Electricity, Meteorology, Computer Rooms, Oil Fields, Power Distribution Lines, Iron Tower Transmission Lines, Gas Stations, Factory Grounding Networks, Lightning Rods And So On. Instrument Testing Is Precise, Fast, Simple, Stable And Reliable..
The Digital Grounding Resistance Tester Is Controlled By The Microprocessor And Can Automatically Detect The Connection Status Of Each Interface And The Interference Voltage And Interference Frequency Of The Ground Network, And Has The Function Of Testing The Auxiliary Grounding Resistance Value. At The Same Time Store 500 Sets Of Data, Resistance Measurement Range: 0.01Ω ~ 3000Ω, Grounding Voltage Range: 0.01 ~ 100.0V. Online Monitoring Data Through Monitoring Software, Usb Data Uploaded To Pc And Unique Features Such As Intelligent Alarm Alert.
Features
- Digital earth ground resistance tester, also known as the three-wire grounding resistance tester, grounding resistance meter, etc., is a commonly used meter for measuring grounding resistance. It adopts a large LCD gray-white screen backlight display and microprocessor technology to meet the requirements of two-wire and three-wire test resistance.
- The digital grounding resistance tester is controlled by the microprocessor and can automatically detect the connection status of each interface and the interference voltage and interference frequency of the ground network, and has the function of testing the auxiliary grounding resistance value. At the same time store 500 sets of data, resistance measurement range: 0.01 ~ 3000 , grounding voltage range: 0.01 ~ 100.0V. Online monitoring data through monitoring software, USB data uploaded to PC and unique features such as intelligent alarm alert
- The digital grounding resistance tester consists of host, monitoring software, test line, USB cable, and grounding rod. It has the functions of reading, checking, saving, reporting and printing of historical data.
- Suitable for telecommunications, electricity, meteorology, computer rooms, oil fields, power distribution lines, iron tower transmission lines, gas stations, factory grounding networks, lightning rods and so on. Instrument testing is precise, fast, simple, stable and reliable.
- 2, 3-wire grounding resistance, grounding voltage measurement. Automatic shift, USB interface, data upload function, alarm function, data storage 500 groups, grounding resistance range: 0.00 ~ 3000 , grounding voltage range: 0 ~ 100V
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240419133636VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #26
VTSYIQI Three Wire Ground Resistance Meter Tester Digital Earth Resistance Meters with Two Three Wire Method Range 0.01 3000 1.5% rdg 5dgt Accuracy 0.01 Resolution USB Interface Lithium Battery
Asin: B0D25FVGDD | Model: VTSYIQI20240419133939VTSYIQI | PartNumber: VTSYIQI20240419133939VTSYIQI
The Digital Grounding Resistance Tester Consists Of Host, Monitoring Software, Test Line, Usb Cable, And Grounding Rod. It Has The Functions Of Reading, Checking, Saving, Reporting And Printing Of Historical Data..
2, 3-Wire Grounding Resistance, Grounding Voltage Measurement. Automatic Shift, Usb Interface, Data Upload Function, Alarm Function, Data Storage 500 Groups, Grounding Resistance Range: 0.00Ω ~ 3000Ω, Grounding Voltage Range: 0 ~ 100V.
Suitable For Telecommunications, Electricity, Meteorology, Computer Rooms, Oil Fields, Power Distribution Lines, Iron Tower Transmission Lines, Gas Stations, Factory Grounding Networks, Lightning Rods And So On. Instrument Testing Is Precise, Fast, Simple, Stable And Reliable..
The Digital Grounding Resistance Tester Is Controlled By The Microprocessor And Can Automatically Detect The Connection Status Of Each Interface And The Interference Voltage And Interference Frequency Of The Ground Network, And Has The Function Of Testing The Auxiliary Grounding Resistance Value. At The Same Time Store 500 Sets Of Data, Resistance Measurement Range: 0.01Ω ~ 3000Ω, Grounding Voltage Range: 0.01 ~ 100.0V. Online Monitoring Data Through Monitoring Software, Usb Data Uploaded To Pc And Unique Features Such As Intelligent Alarm Alert.
Features
- Digital earth ground resistance tester, also known as the three-wire grounding resistance tester, grounding resistance meter, etc., is a commonly used meter for measuring grounding resistance. It adopts a large LCD gray-white screen backlight display and microprocessor technology to meet the requirements of two-wire and three-wire test resistance.
- The digital grounding resistance tester is controlled by the microprocessor and can automatically detect the connection status of each interface and the interference voltage and interference frequency of the ground network, and has the function of testing the auxiliary grounding resistance value. At the same time store 500 sets of data, resistance measurement range: 0.01 ~ 3000 , grounding voltage range: 0.01 ~ 100.0V. Online monitoring data through monitoring software, USB data uploaded to PC and unique features such as intelligent alarm alert
- The digital grounding resistance tester consists of host, monitoring software, test line, USB cable, and grounding rod. It has the functions of reading, checking, saving, reporting and printing of historical data.
- Suitable for telecommunications, electricity, meteorology, computer rooms, oil fields, power distribution lines, iron tower transmission lines, gas stations, factory grounding networks, lightning rods and so on. Instrument testing is precise, fast, simple, stable and reliable.
- 2, 3-wire grounding resistance, grounding voltage measurement. Automatic shift, USB interface, data upload function, alarm function, data storage 500 groups, grounding resistance range: 0.00 ~ 3000 , grounding voltage range: 0 ~ 100V
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240419133939VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #27
VTSYIQI Three Wire Earth Ground Resistance Tester Digital Grounding Resistance Tester Instruments with Range 0.01 -3000 1.5% rdg 5dgt Accuracy 0.01 Resolution USB Interface Real Time Display
Asin: B0D25DT2T7 | Model: VTSYIQI20240419132626VTSYIQI | PartNumber: VTSYIQI20240419132626VTSYIQI
The Digital Grounding Resistance Tester Consists Of Host, Monitoring Software, Test Line, Usb Cable, And Grounding Rod. It Has The Functions Of Reading, Checking, Saving, Reporting And Printing Of Historical Data..
2, 3-Wire Grounding Resistance, Grounding Voltage Measurement. Automatic Shift, Usb Interface, Data Upload Function, Alarm Function, Data Storage 500 Groups, Grounding Resistance Range: 0.00Ω ~ 3000Ω, Grounding Voltage Range: 0 ~ 100V.
Suitable For Telecommunications, Electricity, Meteorology, Computer Rooms, Oil Fields, Power Distribution Lines, Iron Tower Transmission Lines, Gas Stations, Factory Grounding Networks, Lightning Rods And So On. Instrument Testing Is Precise, Fast, Simple, Stable And Reliable..
The Digital Grounding Resistance Tester Is Controlled By The Microprocessor And Can Automatically Detect The Connection Status Of Each Interface And The Interference Voltage And Interference Frequency Of The Ground Network, And Has The Function Of Testing The Auxiliary Grounding Resistance Value. At The Same Time Store 500 Sets Of Data, Resistance Measurement Range: 0.01Ω ~ 3000Ω, Grounding Voltage Range: 0.01 ~ 100.0V. Online Monitoring Data Through Monitoring Software, Usb Data Uploaded To Pc And Unique Features Such As Intelligent Alarm Alert.
Features
- Digital earth ground resistance tester, also known as the three-wire grounding resistance tester, grounding resistance meter, etc., is a commonly used meter for measuring grounding resistance. It adopts a large LCD gray-white screen backlight display and microprocessor technology to meet the requirements of two-wire and three-wire test resistance.
- The digital grounding resistance tester is controlled by the microprocessor and can automatically detect the connection status of each interface and the interference voltage and interference frequency of the ground network, and has the function of testing the auxiliary grounding resistance value. At the same time store 500 sets of data, resistance measurement range: 0.01 ~ 3000 , grounding voltage range: 0.01 ~ 100.0V. Online monitoring data through monitoring software, USB data uploaded to PC and unique features such as intelligent alarm alert
- The digital grounding resistance tester consists of host, monitoring software, test line, USB cable, and grounding rod. It has the functions of reading, checking, saving, reporting and printing of historical data.
- Suitable for telecommunications, electricity, meteorology, computer rooms, oil fields, power distribution lines, iron tower transmission lines, gas stations, factory grounding networks, lightning rods and so on. Instrument testing is precise, fast, simple, stable and reliable.
- 2, 3-wire grounding resistance, grounding voltage measurement. Automatic shift, USB interface, data upload function, alarm function, data storage 500 groups, grounding resistance range: 0.00 ~ 3000 , grounding voltage range: 0 ~ 100V
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240419132626VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #28
VTSYIQI Digital Three-Wire Ground Resistance Tester Digital Earth Resistance Meter with USB Interface Resistance Range 0.01 -3000 Voltage Range 0.01-100.0V 500 Sets Data for Telecommunications Test
Asin: B0D255ZN5W | Model: VTSYIQI20240419114845VTSYIQI | PartNumber: VTSYIQI20240419114845VTSYIQI
The Digital Grounding Resistance Tester Consists Of Host, Monitoring Software, Test Line, Usb Cable, And Grounding Rod. It Has The Functions Of Reading, Checking, Saving, Reporting And Printing Of Historical Data..
2, 3-Wire Grounding Resistance, Grounding Voltage Measurement. Automatic Shift, Usb Interface, Data Upload Function, Alarm Function, Data Storage 500 Groups, Grounding Resistance Range: 0.00Ω ~ 3000Ω, Grounding Voltage Range: 0 ~ 100V.
Suitable For Telecommunications, Electricity, Meteorology, Computer Rooms, Oil Fields, Power Distribution Lines, Iron Tower Transmission Lines, Gas Stations, Factory Grounding Networks, Lightning Rods And So On. Instrument Testing Is Precise, Fast, Simple, Stable And Reliable..
The Digital Grounding Resistance Tester Is Controlled By The Microprocessor And Can Automatically Detect The Connection Status Of Each Interface And The Interference Voltage And Interference Frequency Of The Ground Network, And Has The Function Of Testing The Auxiliary Grounding Resistance Value. At The Same Time Store 500 Sets Of Data, Resistance Measurement Range: 0.01Ω ~ 3000Ω, Grounding Voltage Range: 0.01 ~ 100.0V. Online Monitoring Data Through Monitoring Software, Usb Data Uploaded To Pc And Unique Features Such As Intelligent Alarm Alert.
Features
- Digital earth ground resistance tester, also known as the three-wire grounding resistance tester, grounding resistance meter, etc., is a commonly used meter for measuring grounding resistance. It adopts a large LCD gray-white screen backlight display and microprocessor technology to meet the requirements of two-wire and three-wire test resistance.
- The digital grounding resistance tester is controlled by the microprocessor and can automatically detect the connection status of each interface and the interference voltage and interference frequency of the ground network, and has the function of testing the auxiliary grounding resistance value. At the same time store 500 sets of data, resistance measurement range: 0.01 ~ 3000 , grounding voltage range: 0.01 ~ 100.0V. Online monitoring data through monitoring software, USB data uploaded to PC and unique features such as intelligent alarm alert
- The digital grounding resistance tester consists of host, monitoring software, test line, USB cable, and grounding rod. It has the functions of reading, checking, saving, reporting and printing of historical data.
- Suitable for telecommunications, electricity, meteorology, computer rooms, oil fields, power distribution lines, iron tower transmission lines, gas stations, factory grounding networks, lightning rods and so on. Instrument testing is precise, fast, simple, stable and reliable.
- 2, 3-wire grounding resistance, grounding voltage measurement. Automatic shift, USB interface, data upload function, alarm function, data storage 500 groups, grounding resistance range: 0.00 ~ 3000 , grounding voltage range: 0 ~ 100V
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240419114845VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon #29
VTSYIQI 5kv Insulation Resistance Meter High Voltage Insulation Resistance Testers with Resistance 0.01M -2T DC Voltage 0-1000V AC Voltage 0-750V for Motors Cables Insulating Test Lithium Battery
Asin: B0D1Y3GLQ9 | Model: VTSYIQI20240417152727VTSYIQI | PartNumber: VTSYIQI20240417152727VTSYIQI
Hv Insulation Resistance Tester Insulation Resistance Range（Gω):0.01Mω～2000Gω.
Usb Interface:With Usb Interface, Software Monitoring, Storage Data Can Be Uploaded To The Computer, Save And Print.
Dgital Insulation Resistance Meter Ac Voltage Range:0～750V.
High Voltage Digital Insulation Tester Ac Voltage Range:0.1V.
Dgital High Voltage Insulation Tester 5 Kv Insulation Tester Dc Voltage Range:0～1000V.
Dgital Insulation Tester Dc Voltage Range Resolution:0.1V.
High Voltage Insulation Testers Insulation Resistance Resolution:0.01Mω.
Output Short-Circuit Current:≥5Ma(5Kv).
High Voltage Insulation Resistance Tester Test Voltage(V):Rated Voltage×（1±10%）.
Features
- High voltage insulation tester Rated voltage(V):100 250 500 1000 2500V 5000V
- High voltage insulation resistance tester Test Voltage(V):rated voltage 1 10%
- HV insulation resistance tester Insulation Resistance Range G ):0.01M 2000G
- High Voltage Insulation Testers Insulation Resistance Resolution:0.01M
- Dgital high voltage insulation tester 5 kv insulation tester DC Voltage Range:0 1000V
- Dgital insulation tester DC Voltage Range Resolution:0.1V
- Dgital insulation Resistance meter AC Voltage Range:0 750V
- high voltage digital insulation tester AC Voltage Range:0.1V
- Output short-circuit Current: 5mA(5KV)
- USB interface:With USB interface, software monitoring, storage data can be uploaded to the computer, save and print
- See more on Amazon...
Brand: VTSYIQI | Manufacturer: VTSYIQI20240417152727VTSYIQI
Dimensions: 7.87 x 15.75 x 5.91 Inches
See On Amazon