Votex - Buying Guide

Bestselling from Votex on Amazon

1. Short Rubber Car/Truck Antenna Replacement Kit Accessories - USA Stainless Steel Threading - Univers...
2. Votex - Made In USA - M14 x 1.5MM Magnetic Engine Oil Drain Plug fits Acura, Audi, Chevrolet, Chrysl...
3. Antenna for Dodge Avenger, Dart, Durango, Journey, Nitro | Fiat 500 | Jeep Compass, Cherokee, Grand ...
4. Votex - 17 Inch All-Terrain Flexible Rubber Antenna Accessories - Spring Steel Internal Core - Stain...
5. VOTEX - Made in USA - ACWM14-20 Pack - M14 Aluminum Oil or Coolant Crush Washers/Drain Plug Seal Rin...
6. Votex - Antenna Base is Compatible with Chevrolet Silverado 1500-2500-3500 (1999-2006) - Part Number...
7. Votex - Antenna Base - Part Number 22876545 | 15829166
8. Votex - Made in USA - M12 X 1.25MM Magnetic Engine Oil Drain Plug fits Infiniti, Lexus, Nissan, Toyo...
9. Votex - 13 Inch Rubber Carbon Fiber (Black, Blue, Gold, Green, Red, Silver) Antenna Fits Ford F150 -...
10. Votex - Made in USA - M12 X 1.75MM Quick Easy Valve Oil Drain Plug fits Buick, Chevrolet, Cadillac, ...

Features

• BEFORE PURCHASING! This antenna fits most popular vehicles but not all. Make sure you confirm your Year, Make and Model in the fitment feature on the product page. Fits: Dodge Ram 1500, Dodge Ram 2500, Dodge Ram 3500, Ford Bronco, Ford F-150, Ford F-250, Ford F-350, Ford F-450, Jeep Cherokee, Jeep Gladiator, Jeep Wrangler, Toyota FJ Cruiser, Toyota Sienna, Toyota Tacoma, Toyota Tundra, Toyota 4 Runner AND MORE!!
• NOTE: For AM/FM, depending on your location, there may be a reduction in reception if this antenna length is shorter than your factory antenna. In metro areas reduction in reception is generally not noticeable. Will not affect reception for Bluetooth, GPS, Satellite radio or Auxiliary audio inputs.
• CAR WASH PROOF Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4 now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• USA STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your truck is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
• EXCLUSIVITY - Our 6 3/4 is exclusively made by us, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4 can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4 must not be confused with attempted duplicates.
• PERFORMANCE - Our 6 3/4 German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results.
• EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
• See more on Amazon...

Features

• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USES 17MM WRENCH. FOR REPLACEMENT WASHERS SEARCH PART # B07ZQP2M94 - FOR TOOL FREE STAINLESS STEEL OIL DRAIN VALVE, SEARCH PART NUMBER B092KJ78ZG
• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• Fits Acura, Audi, Chevrolet, Chrysler, Dodge, Fiat, Ford, Honda, Hyundai, Jaguar, Jeep, Kia, Mazda, Mercedes, Mitsubishi, Porsche, Volkswagen and other brands. Use Amazon fitment drop down to ensure this will fit your vehicle.
• See more on Amazon...

Features

• Fits: 2011-2014 Chrysler 200, 2011-2014 Dodge Avenger, 2013-2016 Dodge Dart, 2011-2013 Dodge Durango, 2010-2022 Dodge Journey, 2011-2012 Dodge Nitro, 2014-2023 Jeep Cherokee, 2017-2024 Jeep Compass, 2011-2013 Jeep Grand Cherokee, 2011-2013 Jeep Liberty, 2015-2017 Jeep Renegade, 2016-2017 Fiat 500L, 2016-2019 Fiat 500,
• Our antenna is made to exact specifications of the OE part number 68297936AA. Made of high quality rubber designed to last the elements mother nature throws at it. Built for durability!
• Size: Length: 8, Base Width: 0.87 - Identical measurements of factory antenna.
• 1 Year Manufacture Warranty!!
• Easy Screw-On Installation with No Modification, Cutting, or Drilling
• See more on Amazon...

Features

• Before Purchasing! Make sure to confirm this antenna fits by entering your Year, Make and Model in the confirm your fitment feature on the product page.
• NOTE: For AM/FM, depending on your location, there may be a reduction in reception if this antenna length is shorter than your factory antenna. In metro areas reduction in reception is generally not noticeable. Will not affect reception for Bluetooth, GPS, Satellite radio or Auxiliary audio inputs.
• ***NEW SIZE OPTION*** Long awaited, Longer All-Terrain Rubber antenna. Better reception than the common 13 size on the market!!
• SUPERIOR FLEXIBILITY - Our 17 antenna uses a unique spring steel internal core which springs back into shape when bent. Unlike most options that will hold a bent shape or flop like a wet noodle when your vehicle is in motion.
• EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle. FOR OUR CAR WASH PROOF 6 3/4 ANTENNA SEE PART NUMBER B07VWS9V5S
• STAINLESS STEEL THREADS!!!! Common thread material is brass which is much weaker.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plug washers are proudly MADE IN USA. From the soft tempered aluminum stock material right down to the hands that craft each individual one. This ensures that your washer will be carefully and pridefully manufactured to consistent perfection every time.
• SPECIALLY FORMULATED - To ensure a reliable oil tight seal, a crush washer requires a unique blend of aluminum. Our washers are made of materials especially for the role of a crush washer. Not all aluminum crush washers are created equal.
• PRODUCT DIMENSIONS - O.D. (Outside Diameter): 22.0mm - I.D. (Inside Diameter): 14.30mm - Thickness: 2mm
• WE BACK OUR WASHERS - We stand behind our quality crush washers 100%. No matter what the question is, Email/Call our technical support staff located in Wisconsin for advice with questions or concerns.
• VALUE PACK - Our bulk 20 pack will stock your garage for many oil changes to come saving you money over your Genuine part options. Meets or exceeds OEM quality. Save your money yet not skimping on quality, leaving you with a trusted seal.
• See more on Amazon...

Features

• Let us Save YOU Over your Local Dealer!
• Fitment Below
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
• See more on Amazon...

Features

• High-Quality Direct Fit Replacement Antenna Base - 33" Reception Wire - Part Number 22876545 | 15829166
• Let us Save YOU $$ Over your Local Dealer!
• 100% Satisfaction Guarantee, Period!
• NOTE: This product is an upgrade to M7 stud. This applies for mid 2006 and older models. You will need part number B09LRHMQS8 to use your old antenna for mid 2006 and older vehicles.
• Confirm fitment by entering your vehicle information above!!
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] FOR REPLACEMENT WASHERS SEARCH PART #B07ZRY3KVP
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• Fits Infiniti, Lexus, Nissan, Toyota and other brands. Use Amazon fitment drop down to ensure this will fit your vehicle.
• See more on Amazon...

Features

• PATENTED MAKE IT YOURS STYLING - The Spartan takes antenna style to a whole new level, featuring elegant carbon fiber trim at the base and top. PATENTED (11,545,744) removable carbon tip, along with the bottom, will allow you customize and color fashion your antenna to your vehicle. This antenna kit will come with Blue, Black, Gold, Green, Red and Silver carbon fiber colors. NOTE: CONFIRM YOUR VEHICLE IN THE DROP DOWN BOX ABOVE TO ENSURE FITMENT!!
• UNMATCHED RECEPTION / SUPERB PERFORMANCE - Our 13 3/4 antenna uses choice quality materials, including a highly conductive, TUNED Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results.
• EXCLUSIVITY - Our 13 3/4 is exclusively made by us, its levels of performance and durability will not be found elsewhere. The authenticity of our 13 3/4 can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it s important to have an assuring mark knowing you got the real deal. The quality level of our 13 3/4 must not be confused with attempted duplicates.
• CAR WASH SAFE Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! No worries, The Spartans mixture of shortened length and flexibility over the factory rigid steel antenna, will give you the peace of mind in touch car washes. Its strength is Tried, Tested and Proven. Superb Reception, New Strength Standards!!! 1 Year Car Wash Guarantee.
• STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your truck is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
• NOTE: In rural locations one may see a decrease in reception and range. This is due to the large reduction in size from the factory OEM antenna mast.
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex quick drain plugs are MADE IN USA. From the Stainless Steel bar stock material to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
• MESS FREE | HASSLE FREE Lets face it, conventional oil changes are a mess and require gathering of needed tools. Our quick drain plug now is a tool free process with the included valve release 12 hose. Simply spin the hose on for a mess free release of your old oil directly into your waste container, never coming into contact with the waste oil.
• PREMIUM STAINLESS STEEL - The drain plug market has a plethora of options which are constructed of soft metals. These are an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. The plug body, valve, valve spring and cap are of the highest quality standard using stainless that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SMALL COMPACT DESIGN - Reasoning? To keep maximum clearance for drain pans with a bottom drain hole. Bulky quick drain plugs that hang off your oil drain pan can be an issue if it contacts an object on the roadway. Our plug minimizes this caution as its size is not much more that the factory oil drain plug. Compact design also allows for more working room with drain hose during oil changes.
• SIMPLE 4 STEP OPERATION - STEP 1 - Warm Engine to Normal Operating Temperature and Remove Engine Oil Fill Cap Under Hood. STEP 2 - Remove Dust Cap (Use Caution, Cap will be Warm) STEP 3 - Thread drainer hose onto valve fully to drain oil into waste container. STEP 4 - Install dust cap. Make sure to tighten so that it does not vibrate loose.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced if plug is ever removed. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] FOR REPLACEMENT WASHERS SEARCH PART # B07ZRY3KVP - USES 7/8 WRENCH - FOR QUICKEST DRAIN WITH OUR VALVE, DRAIN WHEN ENGINE IS AT OPERATING TEMPERATURE.
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• Fits Chevrolet, Buick, Cadillac, Ford, GMC, Lincoln, and other brands. Use Amazon fitment drop down to ensure this will fit your vehicle.
• See more on Amazon...

Features

• Our best reception short 6 antenna now has a bigger brother, TheCatsPajamas 23 antenna (name defined below). This antenna is great for those who seek durability along with the best reception available. One must note that there is a surplus of short antenna options available but none of them provide anything but frustration! Our experience with any and all short antennas are that they look cool but you lose close to all radio functionality. Not TheCatsPajamas!
• THECATSPAJAMAS - This antenna's awesomeness drew attention to it so much that it even has a name. The Cats Pajamas defined, Is the best at what it does, thus making it highly sought and desirable. Our 23 antenna will surpass the Durability, Quality and Reception of any antenna on the market. It truly is in a world of its own. When in life you're just sick of messing around and just want the Best of the Best.
• EXCLUSIVITY - Our 23 is exclusively made by us, its levels of performance and durability will not be found elsewhere. The quality level of our 23 must not be confused with attempted duplicates.
• CAR WASH SAFE Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! No worries, TheCatsPajamas mixture of shortened length and flexibility over the factory rigid steel antenna, will give you the peace of mind in touch car washes. Its strength is Tried, Tested and Proven. Superb Reception, New Strength Standards!!!
• STRENGTH - Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
• UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 23 antenna uses only choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results.
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] FOR REPLACEMENT WASHERS SEARCH PART # B07ZRY11BT
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• Fits Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Oldsmobile, Plymouth, Pontiac and other brands. Use Amazon fitment drop down to ensure this will fit your vehicle.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an o-ring; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• PROMISED PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you're not 100% satisfied with its quality or performance, return your drain plug for a full refund!
• EASY TO INSTALL - Our plug will install in place of your current drain plug. Simply wipe the magnet clean of debris during oil change. USE AMAZON FITMENT DROP DOWN, EMAIL OR ASK A QUESTION TO ENSURE THIS WILL WORK WITH YOUR VEHICLE. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ]
• Search part number B09P21Z1W5 for replacement o-rings.
• See more on Amazon...

Features

• PATENTED MAKE IT YOURS STYLING - The Spartan takes antenna style to a whole new level, featuring elegant carbon fiber trim at the base and top. PATENTED removable carbon tip, along with the bottom, will allow you customize and color fashion your antenna to your vehicle. Black carbon fiber is the default color shipped, available separately is a Carbon Fiber Color Kit (Part Number B08SFW5CDF). NOTE: CONFIRM YOUR VEHICLE IN THE DROP DOWN BOX ABOVE TO ENSURE FITMENT!!
• UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 13 3/4 antenna uses choice quality materials, including a highly conductive, TUNED Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
• EXCLUSIVITY - Our 13 3/4 is exclusively made by us, its levels of performance and durability will not be found elsewhere. The authenticity of our 13 3/4 can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it s important to have an assuring mark knowing you got the real deal. The quality level of our 13 3/4 must not be confused with attempted duplicates.
• CAR WASH SAFE Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! No worries, The Spartans mixture of shortened length and flexibility over the factory rigid steel antenna, will give you the peace of mind in touch car washes. Its strength is Tried, Tested and Proven. Superb Reception, New Strength Standards!!! 1 Year Car Wash Guarantee.
• STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your truck is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
• NOTE: In rural locations one may see a decrease in reception and range. This is due to the large reduction in size from the factory OEM antenna mast.
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USES REPLACEMENT CRUSH WASHER KIT PART NUMBER B09D552V76 - USES 10MM WRENCH
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• See more on Amazon...

Features

• STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. ***Select few applications with larger diameter threading will arrive brass for needed added reception performance.
• Manufactured with CARE and PRIDE using state of the art Swiss machines. Using the finest machines allows for consistent perfection of every antenna that we produce. First we manufacture our antennas from local raw 6061 aluminum. Secondly, they're anodized locally ensuring a durable, clean and long lasting vibrant finish for many years of use on your vehicle. Anodized coating cannot peel or flake off. It is part of the metal and gives the aluminum a deeper, richer metallic appearance.
• EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle.
• IMPROVED APPEARANCE - This antenna is scaled to dimensions of the 50 caliber bullet to give your ride style and attitude. .
• Antennas main design is for appearance enhancements. AM/FM reception performance may decrease. If your geographical location is challenging for this antenna upon install, utilize our hassle free returns. For the Ultimate Reception Short Antenna and car wash proof, see our 6 3/4 Antenna part number B07VWS9V5S!!
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• See more on Amazon...

Features

• Our antenna is made to exact specifications of the OE GM part number 22783398. Made of high quality rubber designed to last the elements mother nature throws at it. Built for durability!
• Size: Length: 11, Base Width: 0.85 - Identical measurements of factory antenna.
• 1 Year Manufacture Warranty!!
• Easy Screw-On Installation with No Modification, Cutting, or Drilling
• See more on Amazon...

Features

• 13" All-Terrain SHORT Custom Flexible Rubber AM/FM Antenna
• SUPERIOR FLEXIBILITY - Our 13 antenna uses a unique spring steel internal core which springs back into shape when bent. Unlike most options that will hold a bent shape or flop like a wet noodle when your vehicle is in motion.
• EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle. FOR OUR CAR WASH PROOF 6 3/4 ANTENNA SEE PART NUMBER B07VWS9V5S
• See more on Amazon...

Features

• OEM SIZE 31" BLACK Tapered Antenna - Spring Steel Construction!!
• *** Wind Noise Canceling *** Features an external coil to cancel wind noise
• Stainless Steel Threading; MADE IN THE U.S.A.!!!!
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plug washers are proudly MADE IN USA. From the soft tempered aluminum stock material right down to the hands that craft each individual one. This ensures that your washer will be carefully and pridefully manufactured to consistent perfection every time.
• SPECIALLY FORMULATED - To ensure a reliable oil tight seal, a crush washer requires a unique blend of aluminum. Our washers are made of materials especially for the role of a crush washer. Not all aluminum crush washers are created equal.
• PRODUCT DIMENSIONS - O.D. (Outside Diameter): 23.0mm - I.D. (Inside Diameter): 12.30mm - Thickness: 2mm
• 100% SATISFACTION GUARANTEED - We stand behind our quality crush washers 100%. No matter what the question is, Email/Call our technical support staff located in Wisconsin for advice with questions or concerns. Not happy with your crush washer? Simply return for a full refund within 30 days.
• VALUE PACK - Our bulk 20 pack will stock your garage for many oil changes to come saving you money over your Genuine part options. Meets or exceeds OEM quality. Save your money yet not skimping on quality, leaving you with a trusted seal.
• See more on Amazon...

Features

• High-Quality Direct Fit Replacement Antenna Base - Part Number XS8Z-18919-AA
• Let us Save YOU $$ Over your Local Dealer!
• Fitment Below
• See more on Amazon...

Features

• CAR WASH PROOF Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)
• STRENGTH - Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.
• TRUSTED USA BRAND: Assembled for you by a Wisconsin family run antenna specialist, since 1999.
• EXCLUSIVITY - Our 6 3/4 is exclusively made for us by a premium OEM manufacture, its levels of performance and durability will not be found elsewhere. The authenticity of our 6 3/4 can now be found with our faint logo in the bottom of rubber molding. With countless hours of engineering, it s important to have an assuring mark knowing you got the real deal. The quality level of our 6 3/4 must not be confused with attempted duplicates.
• EASY INSTALLATION - Mere minutes is all it takes, with an added minute to step back to admire the new improved looks of your vehicle. NOTE: CONFIRM YOUR VEHICLE IN THE DROP DOWN BOX ABOVE TO ENSURE FITMENT!!
• UNMATCHED RECEPTION / PROMISED PERFORMANCE - Our 6 3/4 German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results. If you're not 100% satisfied with performance, return your antenna for a full refund!
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] - FOR REPLACEMENT WASHERS SEARCH PART # B086RRJD7Q
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• Fits Mini, Subaru, Toyota and other brands. Use Amazon fitment drop down to ensure this will fit your vehicle.
• See more on Amazon...

Features

• High-Quality Direct Fit Replacement Antenna Base - 33" Reception Wire - Part Number 22876545
• Let us Save YOU $$ Over your Local Dealer!
• Fitment Below
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex bleeder screws are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our screws here in our home state of Wisconsin. This ensures that your screw kit will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come.
• DITCH THE PLASTIC - The factory bleeder screw is made of plastic and is recommend to be replaced as it is not a multi use part. Our stainless bleeder screws are designed to last likely the life of the vehicle.
• SUPERB PERFORMANCE - Our screws use choice quality materials.
• EASY TO INSTALL - Our screw will install in place of your current plastic version. Make sure to not over-torque the bleeder screws as this could damage the bleeder bung. Recommended torque is 5NM.
• Kit includes 2 screws as pictured. Fitment Below
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• PROMISED PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you're not 100% satisfied with its quality or performance, return your drain plug for a full refund!
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USE AMAZON FITMENT DROP DOWN, EMAIL OR ASK A QUESTION TO ENSURE THIS WILL WORK WITH YOUR VEHICLE. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] - FOR REPLACEMENT WASHERS SEARCH PART # B09D552V76
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] - FOR REPLACEMENT WASHERS SEARCH PART # B09D552V76
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• Fits BMW, Mini, Toyota and other brands. Use Amazon fitment drop down to ensure this will fit your vehicle.
• See more on Amazon...

Features

• Upgraded to hex wrench head, not weak allen wrench. Significantly improved magnet strength over stock drain plugs. This will come with aluminum crush washer (Part Number 5812232). Will not include O-Ring. Simply use O-Rings from the stock drain plug.
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• PROMISED PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you're not 100% satisfied with its quality or performance, return your drain plug for a full refund!
• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plugs is needed high temperature o-ring.
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM 304 STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• PROMISED PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters. If you're not 100% satisfied with its quality or performance, return your drain plug for a full refund!
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USE AMAZON FITMENT DROP DOWN, EMAIL OR ASK A QUESTION TO ENSURE THIS WILL WORK WITH YOUR VEHICLE. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] - FOR REPLACEMENT WASHERS SEARCH PART # B09D552V76
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• See more on Amazon...

Features

• PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer; Yes also MADE IN USA
• HIGH TEMPERATURE NEODYMIUM MAGNET Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your bikes engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life.
• PREMIUM STAINLESS STEEL The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of the highest quality standard, that starts with using a metal that will be strong enough to last years. Our steel is sourced from the states, promising not to be a weak recycled material often found in foreign metals.
• SUPERB PERFORMANCE - Our drain plugs use choice quality materials. Our magnet will extract small metal particles that are too fine for oil filters to catch along with capturing large metal shavings that plug filters.
• EASY TO INSTALL - Our plug will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USE AMAZON FITMENT DROP DOWN, EMAIL OR ASK A QUESTION TO ENSURE THIS WILL WORK WITH YOUR VEHICLE. [ SEE PRODUCT DETAILS BELOW FOR MORE DETAILED INFORMATION ] - USES 3/4 WRENCH - FOR REPLACEMENT WASHERS SEARCH PART # B07ZQP2M94
• TRUSTED BRAND - Brought to you by a Wisconsin family run drain plug specialist, since 2019.
• See more on Amazon...