XTPTFABS - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
XTPTFABS 16 pin Female to 8 pin CAN EOBD OBD2 OBDII Diagnostic Connector Cable Compatible with Polaris ATV Motorcycle Slingshot(Only Cable)
Asin: B0BRW5Z8FX | Model: OBD2 OBDII Diagnostic Connector | PartNumber: OBD2 OBDII Diagnostic Connector
Obd2 To 8 Pin Diagnostic Adapter For Polaris Atv.Typically Used With Diagnostic Readers To Convert The Standard 16 Pin Plug Into The Required 8 Pin Plug. Can Be Used To Read/Reset Fault Codes With Your Code Reader Or Wireless Obd2 Bluetooth Scanner And Diagnostic App..
Note: This Will Not Work With Models With A 4 Pin Diagnostic Connector. Before Buying, Check Your Diagnostic Connector It Must Be 8 Pin..
Support List: Rzr, Ranger, General, Sportsman, Ace, Slingshot, Etc. As Well As Other Models With 8 Pin Diagnostic Connector..
Which Polaris Models Are Covered?Please Check The Detailed Image To See If It Is Compatible With Your Polaris Compatible Scanner. Please Always Check What Connector You Have..
Features
- 8 pin Plug Adaptor for use with certain Polaris vehicles ATV. With this tool you can read and reset fault code on your Polaris vehicles ATV diagnostic socket for CAN Bus models.
- Which Polaris models are covered?Please check the detailed image to see if it is compatible with your Polaris compatible scanner. Please always check what connector you have.
- OBD2 To 8 Pin Diagnostic Adapter for Polaris ATV.Typically used with diagnostic readers to convert the standard 16 pin plug into the required 8 pin plug. Can be used to read/reset fault codes with your Code Reader or wireless OBD2 Bluetooth scanner and diagnostic APP.
- Support list: RZR, Ranger, General, Sportsman, ACE, Slingshot, etc. As well as other models with 8 pin diagnostic connector.
- Note: This will not work with models with a 4 pin diagnostic connector. Before buying, check your diagnostic connector it must be 8 pin.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Dimensions: 1.20 x 13.00 x 1.96 Inches
Warranty: 1 Year
See On Amazon #2
XTPTFABS Access Port OBD2 OBDII Cable Compatible with Cord V3 Sub-aru Ford VW WRX STI Focus Evo BMW,Fits: All Cars That use V3 Accessports
Asin: B0BRXPZMGS | Model: OBD2 OBDII Cable | PartNumber: OBD2 OBDII Cable
√【High-Quality】:The Cable Material With Durable And Positive Performance..
√【Tips】:Please Make Sure Your Scan Tool Model Matches What Is Listed Here..
√【Note】:While Obd-Ii And Other Diagnostic Cables Look Alike, Please Do Not Buy Cables Only Based On Looks; All Diagnostic Cables Are Wired Internally Different Depending On The Scan Tool Model Number. Even Same Manufactures Of Scan Tools Use Cables With Different Internal Wiring Schemes For The Different Models They Make. Make Sure Your Scan Tool Model Matches What Is Listed Here..
√【Length】: 6.4 Foot Long Cable And It Is Very Convenient To Link The Instrument Applicable..
Features
- Compatible with :Access port obd2 obdii cable Compatible with Cord V3 Sub-aru Ford VW WRX STI Focus Evo BMW,Fits: All cars that use V3 Accessport.s
- Length : 6.4 Foot Long Cable and it is very convenient to link the instrument applicable.
- High-quality :The cable material with durable and positive performance.
- Note :While OBD-II and other diagnostic cables look alike, Please DO NOT buy cables only based on looks; ALL diagnostic cables are wired internally different depending on the Scan Tool Model number. Even same manufactures of scan tools use cables with different internal wiring schemes for the different models they make. Make sure your scan tool model matches what is listed here.
- Tips :Please make sure your scan tool model matches what is listed here.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Dimensions: 1.57 x 78.74 x 1.96 Inches
Warranty: 1 Year
See On Amazon #3
XTPTFABS Lower Steering Column Bearing Compatible with 1966-1972 1973-1979 Ford Trucks F150 F250 and 1976-1979 Broncos
Asin: B0BQJ321T1 | Model: Steering Column Bearing | PartNumber: Steering Column Bearing | Ean: 0701063851560 | UPC: 701063851560
√【Feature】: Fits Right A Full 2.125 Inch Outer Diameter For A Proper And Snug Fit In The Column Tube. 0.75 Inch (Shaft) Inner Diameter. 0.625 Inch Depth. Supplied With Three Stainless Steel 1/4 Inch Cap Screws And Tapped Mounting Holes. This Bearing Will Also Work With Steeroids Or Similar Power Steering Conversion Kits For Vintage Mustangs..
√【Note】: This Bearing Will Also Work With Steeroids Or Similar Power Steering Conversion Kits For Vintage Mustangs..
√【High-Quality】: Tough 1/8 Inch Thick Drawn-Over-Mandrel (Dom) Steel Tubing Is Precisely Cut, Deburred, Fitted Into A Jig For Perfect Concentricity, And Mig Welded To The Top Plate Where The Bearing Itself Is Secured. The Bearing Is A Precision Ground And Sealed Radial Ball Bearing. You Will Not Find A Stronger Combination!.
√【Also Compatible With】:Also Works For 66-72 Ford Trucks And Vintage Ford Cars Of Similar Age With Minor Modifications To The Column Tube. You Will Need To Drill Out Three Spot Welds So That You Can Remove All Parts Of The Stock Bearing, And Then My Kit Can Be Installed In Its Place. Please Confirm Fit By Comparing With The Dimensions Given Below..
Features
- Compatible with : Lower Steering Column Bearing Perfect For 1973-1979 F-ord Trucks , 1976-1979 F-ord Broncos
- Also compatible with :Also works for 66-72 Ford Trucks and vintage Ford cars of similar age with minor modifications to the column tube. You will need to drill out three spot welds so that you can remove all parts of the stock bearing, and then my kit can be installed in its place. Please confirm fit by comparing with the dimensions given below.
- Feature : Fits Right A full 2.125 inch outer diameter for a proper and snug fit in the column tube. 0.75 inch (shaft) inner diameter. 0.625 inch depth. Supplied with three stainless steel 1/4 inch cap screws and tapped mounting holes. This bearing will also work with Steeroids or similar power steering conversion kits for vintage Mustangs.
- High-Quality : TOUGH 1/8 inch thick Drawn-Over-Mandrel (DOM) steel tubing is precisely cut, deburred, fitted into a jig for perfect concentricity, and MIG welded to the top plate where the bearing itself is secured. The bearing is a precision ground and sealed radial ball bearing. You will not find a stronger combination!
- Note : This bearing will also work with Steeroids or similar power steering conversion kits for vintage Mustangs.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #4
XTPTFABS Billet 2" Universal Steering Column Keyed No Drop Mount for Most Common Aftermarket 2" Diameter Columns Fit for GM GMC Chevy Dodge Ford (Black)
Asin: B0CBDG48VK | Model: Steering Column Keyed No Drop Mount | PartNumber: Steering Column Keyed No Drop Mount
√【High-Quality】: Made Of High-Quality Aluminum Alloy.Anodized Black, Corrosion Resistance, Enhance Wear Resistance And Hardness, Protect Metal Surfaces, And Extend Product Service Life..
√【Note】:Our Product Has Undergone Anodizing Process And Has A Wider Range Of Applications. Please Confirm If The Product Meets Your Vehicle Model. If You Have Any Questions, Please Contact Us..
√【Compatible With】:G-M (C-Hevy, G-Mc, P-Ontiac, C-Adillac, B-Uick, Old-Smobile) Fits All 2 Inch Diameter (Most Common) Aftermarket Columns Including I-Didit, F-Laming River, Billet S-Pecialties, Pro Comp, Etc..
√【Feature】:The Unique Hinged Design Allows These Column Drops To Be Used With All Popular Aftermarket Column Diameters..
Features
- Compatible with :Fits 2" diameter columns found in the most popular aftermarket columns Fits all 2 inch diameter (most common) aftermarket columns including I-didit, F-laming River, Billet S-pecialties, Pro Comp.
- Feature :The unique hinged design allows these column drops to be used with all popular aftermarket column diameters.
- High-Quality : Made of high-quality aluminum alloy.Anodized black, corrosion resistance, enhance wear resistance and hardness, protect metal surfaces, and extend product service life.
- Compatible with :G-M (C-hevy, G-MC, P-ontiac, C-adillac, B-uick, Old-smobile) Fits all 2 inch diameter (most common) aftermarket columns including I-didit, F-laming River, Billet S-pecialties, Pro Comp, Etc.
- Note :Our product has undergone anodizing process and has a wider range of applications. Please confirm if the product meets your vehicle model. If you have any questions, please contact us.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #5
XTPTFABS for sct x4 Cable,OBD2 Cable OBDII Cable Compatible with Xcalibrator X4 Model Tuner Scanner Works Perfectly on SCT X4 Tuner (Replace #7011U-08 Black)
Asin: B0BX216JJG | Model: 7011U-08 | PartNumber: 7011U-08
√【Quality Assurance】:100% Brand New And High Quality.Sct X4 Cable Obd2 Have Been Strictly Inspected And Tested Before Leaving. It Is Perfectly Matched To The Sct Tuner After Installation..
√【Note】:Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification..
√【Package Included】:1Pcs Xcalibrator X4 Model Tuner Scanner Replacement Sct X4 Obdii Cable.
√【Simple Installation】:For Sct X4 Cable,Direct Replacement, Not Require Any Modification..
Features
- Compatible With :sct tuner cable Compatible With XCalibrator X4 Model Tuner Scanner Works perfectly on SCT X4 tuner.
- Simple installation :For sct x4 cable,Direct replacement, NOT require any modification.
- Quality Assurance :100% brand new and high quality.sct x4 cable obd2 Have Been Strictly Inspected And Tested Before Leaving. It is perfectly matched to the sct tuner after installation.
- Package Included :1PCS XCalibrator X4 Model Tuner Scanner Replacement SCT X4 OBDII Cable
- Note :Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Dimensions: 1.50 x 59.00 x 1.96 Inches
Warranty: 1 Year
See On Amazon #6
XTPTFABS Fuel Tank Vent Valve Compatible with 1985-1992 Camaro/Firebird 5.0L 5.7L TPI TBI Gas Fuel Tank Vent Valve replace HT10033125 10033125 10029145 Compatible V6 & V8
Asin: B0BQJ7TJKW | Model: HT10033125 | PartNumber: HT10033125 | Ean: 0701063851539 | UPC: 701063851539
√【Function】:You Use Them On Your Hotrods With Fuel Injection To Keep The Gasoline Smell From The Garage While They Are Stored..
√【Service 】: If You Encounter Problems During Use, Please Contact Me Immediately.
√【High-Quality】:Made From High-Quality Materials For Ultimate Durability..
√【Manufacturer Part Number】:Ht10033125 10033125 10029145.
Features
- Compatible With : For 1985-1992 Camaro/Firebird 5.0L 5.7L TPI TBI
- Manufacturer Part Number :HT10033125 10033125 10029145
- Function :You use them on your hotrods with fuel injection to keep the gasoline smell from the garage while they are stored.
- High-Quality :Made from high-quality materials for ultimate durability.
- Service : If you encounter problems during use, please contact me immediately
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #7
XTPTFABS 1Set of Sun Visor Repair kit,Sun Visor Clips,Heavy Duty Sun Visor Clips Compatible with DO-DGE RAM 1500 Trucks 2019-2023 (1)
Asin: B0BTYLXC6C | Model: Sun Visor Clips | PartNumber: Sun Visor Clips
√【High Quality Material】:This Sun Visor Holder Made For High-Quality Aluminum. Made Of Aluminum, Its Surface Adopts Aluminum Alloy Sandblasting Technology. Thicker, Wear-Resistant And Durable.This Repair Kit Has Undergone A Rigorous Testing To Ensure Proper Operating Parameters To Factory Specification, Up To Original Standard.It Not Only Has High Hardness, But Also High Smoothness, Is Not Easy To Deform, And Fits Tightly..
√【Note】:Our Sun Visor Repair Kit Is Suitable For Most 2019, 2020, 2021, 2022, 2023 Dodge Ram 1500 Trucks.Please Confirm Your Model Above Before Ordering..
√【Applicable Scenario】:Suitable For Driver's Left Or Right Sunshade Bracket Repair Kit, It Is Used For Restores And Repairs Vehicle Sagging Sun Visor.Our Visors Clips Effectively Reinforce The Pivot On The Post Of The Sun Visor, And Permanently Fix Your Problem.You Don't Need To Spend A Few Hundred Dollars To Buy A New Sun Visor. Using Our Product Has A High Cost Performance Ratio And Doesn't Affect The Appearance, Allowing Your Sunshade To Restore Good Performance..
√【Package Included】:1Set Of Black Sun Visor Repair Kit.You Get Both Aluminum Visors Clips And Four Black Screws. This Visor Repair Set Can Only Solve The Problem Of One Sunshade For You.Simple Installation.Remove The Factory "Outside" Screw Next To The Sunshade Pillar, Use A Screwdriver To Tighten The Repair Kit At The Proper Position Of The Sunshade Pillar.
Features
- Compatible With :The aluminum sun visor repair kits Compatible with DO-DGE RAM 1500 TRUCKS 2019-2023
- Package Included :1Set of Black Sun visor repair kit.You get both aluminum visors clips and four black screws. This visor repair set can only solve the problem of one sunshade for you.Simple installation.Remove the factory outside screw next to the sunshade pillar, use a screwdriver to tighten the repair kit at the proper position of the sunshade pillar
- High Quality Material :This sun visor holder made for high-quality aluminum. Made of aluminum, its surface adopts aluminum alloy sandblasting technology. Thicker, wear-resistant and durable.This repair kit has undergone a rigorous testing to ensure proper operating parameters to factory specification, up to original standard.It not only has high hardness, but also high smoothness, is not easy to deform, and fits tightly.
- Applicable scenario :Suitable for driver's left or right sunshade bracket repair kit, it is used for restores and repairs vehicle sagging sun visor.Our visors clips effectively reinforce the pivot on the post of the sun visor, and permanently fix your problem.You don't need to spend a few hundred dollars to buy a new Sun Visor. Using our product has a high cost performance ratio and doesn't affect the appearance, allowing your sunshade to restore good performance.
- Note :Our Sun Visor repair kit is suitable for most 2019, 2020, 2021, 2022, 2023 Dodge RAM 1500 Trucks.Please confirm your model above before ordering.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 YEAR
See On Amazon #8
4PCS Oil Bath Dust Caps, K71-038-00,For Dexter 6k-8K 8-218, 8-219, 8-232 General Duty Axles Built 1989 and older, for Dexter 6K 7K 8K 2.75" Threads Trailer Axle Plastic Cover 21-35 23-29 Oil Caps (4)
Asin: B0BRX5K47P | Model: K71-038-00 8-218 8-219 8-232 | PartNumber: K71-038-00 8-218 8-219 8-232
√【Part Number】: K71-038-00.Your Drum Should One Of These Numbers Cast Into It: 8-218, 8-219, 8-232 8-285 8-286.Replaces Dexter 21-35 Oil Cap..
√【Note】: Replaces Dexter 21-35 Oil Cap.They Are Also A Replacement For Some Kodiak Disk Brakes.If You Have Any Questions, Please Feel Free To Contact Us..
√【Specifications】: Oil Bath Dust Caps Specifications 2-7/8" Thread Od 12 Thread.Include 4 Pcs Oil Bath Dust Caps..
√【Features】:4Pcs 2.75" Oil Caps For 6K-8K Dexter Drums Common On 8000# Axles, But Also Used On Some 6000 & 7000 Oil Bath, Also Fits Rare 9000# Drum Number 8-232 (Oct 1 1989 And Older) Replaces Dexter Oil Cap 23-29 And 21-35.
Features
- Compatible with : These axle oil cap are substitutes Replaces dexter 21-35 oil cap.These oil caps commonly found on 8-219 Oil Bath Drums (8 Lug) and 8-232, 8-285, 8-286 drums.(Check to be sure, 2-7/8" threads!)
- Features :4pcs 2.75 Oil Caps for 6K-8K Dexter Drums Common on 8000# Axles, but also used on some 6000 & 7000 oil bath, Also Fits RARE 9000# Drum Number 8-232 (Oct 1 1989 and older) Replaces Dexter Oil Cap 23-29 and 21-35
- Part Number : K71-038-00.Your drum should one of these numbers cast into it: 8-218, 8-219, 8-232 8-285 8-286.Replaces dexter 21-35 oil cap.
- Specifications : oil bath dust caps Specifications 2-7/8 Thread OD 12 Thread.Include 4 PCS oil bath dust caps.
- Note : Replaces dexter 21-35 oil cap.They are also a replacement for some Kodiak Disk Brakes.If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #9
XTPTFABS PR308 / PR-308 Vacuum Pump Coupler Sleeve Pump Sleeve Compatible with PR208 / PR-208 Flexible Coupler(Replace#684520331976)
Asin: B0BWY2H9GL | Model: PR308 | PartNumber: PR308
√【Instructions 】: Used With Platinum And Eliminator Series Vacuum Pump Parts Vacuum Pumps..
√【Note】:Please Check The Actual Size Of Your Coupler Before Purchasing.Check If It Matches The Vacuum Pump Coupler Sleeve..
√【Perfectly Fit】:The Products Have Been Strictly Inspected And Tested Before Leaving The Factory.Perfect Replacement For An Original Part..
√【Product Specifications】:Overall Length Approx: 7/8"Diameter: 1-1/8"Number Of Grooves: 8.
Features
- Compatible with :Pump sleeve Only for PR208 / PR-208 Flexible Coupler.For use with DV42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6E
- Product Specifications :Overall Length Approx: 7/8Diameter: 1-1/8Number of grooves: 8
- Instructions : Used with Platinum and Eliminator Series vacuum pump parts Vacuum Pumps.
- Perfectly Fit :The Products Have Been Strictly Inspected And Tested Before Leaving The Factory.Perfect replacement for an original part.
- Note :Please check the actual size of your coupler before purchasing.Check if it matches the Vacuum Pump Coupler Sleeve.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #10
XTPTFABS 154 23 Radiator Hose Retaining Spring Clips Radiator Hose Retaining Clip Radiator Hose Clip Compatible With BMW E39 E38 E60 E90 745Li X5 E46 325i 328i M3 540i 740iL 740i
Asin: B0BRZ1NDQ3 | Model: 154 23 | PartNumber: 154 23
√【Easy To Use】:Radiator Hose Retaining Clip Use Is Simple, This Product Conforms To The Original Factory Standard, You Can Directly Replace It, Which Can Greatly Save Your Time..
√【Service 】: If You Encounter Problems During Use, Please Contact Me Immediately.
√【High-Quality】:Radiator Hose Retaining Spring Horse Shoe Clip Clamp Made Of High-Quality Materials And Subjected To Strict Quality Testing To Ensure Oe Fit, Shape And Function..
√【Part Number 】:154 23；Radiator Hose Clip Radiator Hose Retaining Clip For Bmw.
Features
- Compatible with : Radiator Hose Retaining Spring horse shoe clip clamp Compatible With BMW E39 E38 E60 E90 745Li X5 E46 325i 328i M3 540i 740iL 740i
- Part number :154 23 radiator hose clip radiator hose retaining clip for BMW
- Easy to Use :Radiator hose retaining clip use is simple, this product conforms to the original factory standard, you can directly replace it, which can greatly save your time.
- High-Quality :Radiator Hose Retaining Spring horse shoe clip clamp Made of high-quality materials and subjected to strict quality testing to ensure OE fit, shape and function.
- Service : If you encounter problems during use, please contact me immediately
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Dimensions: 1.18 x 2.95 x 2.95 Inches
Warranty: 1 Year
See On Amazon #11
XTPTFABS Power Systems Impeller Drive Sleeve 359448 Compatible With Kohler(models 5E, 4EF, 7.3E, 6EF, 5ECD, 4EFCD, 7.3ECD, and 6EFCD)-8 splines
Asin: B0BRXGZ4CG | Model: 359448 | PartNumber: 359448
√【High-Quality】:High Quality Polyurethane, Corrosion Resistance, Oxidation Resistance, Crack Resistance, Durability, Long Service Life, Not Easy To Deformation After Long-Term Use..
√【Service 】: If You Encounter Problems During Use, Please Contact Me Immediately.
√【Easy To Install】:The Part Is Easy And Quick To Install. Simply Remove And Replace The Old Or Damaged Parts, Which Can Be Completed In 10 Minutes, Improving The Time Efficiency..
√【Oem Number】:359448.
Features
- Compatible with :Compatible With Kohler(models 5E, 4EF, 7.3E, 6EF, 5ECD, 4EFCD, 7.3ECD, and 6EFCD)-8 splines
- OEM Number :359448
- High-Quality :High quality polyurethane, corrosion resistance, oxidation resistance, crack resistance, durability, long service life, not easy to deformation after long-term use.
- Easy to install :The part is easy and quick to install. Simply remove and replace the old or damaged parts, which can be completed in 10 minutes, improving the time efficiency.
- Service : If you encounter problems during use, please contact me immediately
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Dimensions: 0.98 x 0.98 x 0.78 Inches | Weight: 0.02 pounds
Warranty: 1 Year
See On Amazon #12
XTPTFABS 2" Billet Aluminum Clutch Pedal Extender clutch pedal extension Compatible with Peterbilt 379 386 389 Trucks -Billet Silver Aluminum
Asin: B0BRW2XFW2 | Model: ic-198001-11clutch pedal extender | PartNumber: ic-198001-11clutch pedal extender
√【High-Quality】: 2 Inch Billet Aluminum Clutch Extender Fit Is Made Of High-Quality Aluminum Material By Cnc Lathe..
√【Easy To Install】:Clutch Pedal Extender Is Easy And Quick To Install. Simply Remove And Replace The Old Or Damaged Parts, Which Can Be Completed In 10 Minutes, Improving The Time Efficiency..
√【Function】: 2 Inch Billet Aluminum Clutch Extender Changes The Position & Angle Of The Pedal To Help You Better Disengage The Clutch. Increases Angle Of Foot In Relation To The Floor. Improves Driver Ergonomics. Less Strain On Ankle.
√【Manufacturer Part】: Ic-198001-11 Clutch Pedal Extender.
Features
- Compatible with :Clutch pedal extender Compatible with 2001-2007 Peterbilt 378;2001-2007 Peterbilt 379;2006-2012 Peterbilt 386;2008-2013 Peterbilt 388;2008-2013 Peterbilt 389
- Manufacturer Part : ic-198001-11 Clutch pedal extender
- High-Quality : 2 inch billet aluminum clutch extender fit is made of high-quality aluminum material by CNC lathe.
- Function : 2 inch billet aluminum clutch extender Changes the Position & Angle of the pedal to help you better disengage the clutch. Increases angle of foot in relation to the floor. Improves driver ergonomics. Less strain on ankle
- Easy to install :Clutch pedal extender is easy and quick to install. Simply remove and replace the old or damaged parts, which can be completed in 10 minutes, improving the time efficiency.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #13
XTPTFABS 81143 Hub Dust Caps Compatible With Dexter Vortex, K71-G01-73 21-261 48355v Replacement Vortex Hub Dust Cap - Fit Boat, Trailer & Other Hub Kits (4 Pack, w/O-Ring) (4)
Asin: B0BVBHXKJG | Model: 81143, 48355v, K71-G01-73, 21-261 | PartNumber: 81143, 48355v, K71-G01-73, 21-261
√【High-Quality】: The Trailer Hub Replacement Cover Is Made Of Highly Durable Material. The Dust Cover Adopts A Threaded Design, Making It Easy To Install And Replace. And It Is Equipped With An O-Ring To Help Replace The Cover And Ensure A Tight Fit With The Wheel Hub..
√【Note】: Including 4 Pcs Trailer Hub Caps.Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification..
√【Part Number】:The Trailer Hub Cap Replacement Compatible With Dexter Vortex 81143, 48355V, K71-G01-73, 21-261..
√【Product Size】:The Trailer Hub Cap Replacement Outer Thread Diameter: 2 5/16 Inch. Convenient To Replace Your Broken Vortex 48355V Caps Whenever..
Features
- Compatible with :Our 81143 Trailer Hub Replacement Cap Compatible with Dexter Vortex. Fits for 1250 lbs-1750 lbs Dexter Marine Product / Tie Down Engineering Vortex hubs and other hub kits.(Notice: Only used for Vortex hubs with 5 bolts, not compatible with 6 lug hubs.)
- Product Size :The trailer hub cap replacement outer thread diameter: 2 5/16 inch. Convenient to replace your broken Vortex 48355V caps whenever.
- High-Quality : The trailer hub replacement cover is made of highly durable material. The dust cover adopts a threaded design, making it easy to install and replace. And it is equipped with an O-ring to help replace the cover and ensure a tight fit with the wheel hub.
- Part Number :The trailer hub cap replacement compatible with Dexter Vortex 81143, 48355v, K71-G01-73, 21-261.
- Note : Including 4 Pcs trailer hub caps.Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 2 Year
See On Amazon #14
XTPTFABS Universal Billet Aluminum Steering Column Swivel Floor Mount Compatible with 2" Columns SBC BBC 350.Vehicles with 2" Diameter Steering Columns
Asin: B0BW5THWD7
√【Quality Assurance】:We Know That You Want High Quality Products, So We Provide Professional Functions And High Reliability Products To Bring You A Different Experience And Ensure The Satisfaction Of Each Customer..
√【Note】:Polished Finish Floor Mount.Bolts And Screws For Simple Installation.Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing.Professional Installation Is Highly Recommended..
√【Product Upgrade】:As Shown In The Main Picture, There Are Three Plates And One Ball In The Package. When Installing, Use Three Plates To Clamp The Ball To Make The Installation More Flexible And Suitable For Many Models..
√【Product Feature】:Swivel Design Allows 60° Of Angle While Maintaining Proper Mounting.Machined From 6061-T6 Billet Aluminum That Has Been Polished To A Mirror Like Finish.Fits All 2 Inch Diameter (Most Common) Aftermarket Columns.Including Ididit, Flaming River, Billet Specialties, Pro Comp, Etc..
Features
- Compatible With : Steering Column Swivel Floor Mount Compatible With 2" Columns SBC BBC 350. GM (Chevy, GMC, Pontiac, Cadillac, Buick, Oldsmobile)Ford and Mopar (Chrysler, Dodge, Plymouth)Vehicles with 2" diameter steering columns.
- Product Feature :Swivel design allows 60 of angle while maintaining proper mounting.Machined from 6061-T6 billet aluminum that has been polished to a mirror like finish.Fits all 2 inch diameter (most common) aftermarket columns.Including Ididit, Flaming River, Billet Specialties, Pro Comp, Etc.
- Quality assurance :We know that you want high quality products, so we provide professional functions and high reliability products to bring you a different experience and ensure the satisfaction of each customer.
- Product Upgrade :As shown in the main picture, there are three plates and one ball in the package. When installing, use three plates to clamp the ball to make the installation more flexible and suitable for many models.
- Note :Polished finish floor mount.Bolts and screws for simple installation.Please confirm that the parts are the correct ones you need before purchasing.Professional Installation is Highly Recommended.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #15
XTPTFABS 558-416 Main Harness Fuel Injection Wiring Harness Adapter Compatible with LS3-style MAP Sensor Adapter
Asin: B0BZ3P1Y6K
√【High-Quality】:Made From High-Quality Materials For Ultimate Durability Manufactured To Meet Or Exceed Strict Quality Requirements.It Is Perfectly Matched To The Original Vehicle After Installation..
√【Note】:Please Confirm Whether The Parts Conform To Your Car Before Purchasing..
√【Simple Installation】:Direct Replacement, Not Require Any Modification..
√【Explain】:Main Harnesses Have A Map Sensor Connecter Designed For Use With An Ls1/2 Style Map Sensor.1× Ls Main Harness..
Features
- Compatible with : The 558-416 is an adapter harness that can be used to adapt any LS harness that uses an LS1/2 MAP sensor connection to an LS3 MAP. Also great for use with LS Hi-Ram intakes that require an LS3 MAP sensor.
- Explain :Main harnesses have a MAP sensor connecter designed for use with an LS1/2 style MAP sensor.1 LS Main Harness.
- High-Quality :Made from high-quality materials for ultimate durability Manufactured to meet or exceed strict quality requirements.It is perfectly matched to the original vehicle after installation.
- Simple installation :Direct replacement, NOT require any modification.
- Note :Please confirm whether the parts conform to your car before purchasing.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #16
XTPTFABS Oil Bath Dust Caps, K71-704-00,Compatible with Dexter 9k-10K 8-415 430 General Duty Axles Built After July 2009, for Dexter 9K 10K 3.5" Threads Trailer Axle Plastic Cover 21-88 Oil Caps,4PCS
Asin: B0BQJ8N7ZL | Ean: 0701063851515 | UPC: 701063851515
√【Size】: 3.5" Thread Od 12 Thread.
√【Easy To Install】: Take Off The Old Cap Directly And Screw On The New Cap By Hand The Installation Can Be Completed In A Few Minutes..
√【High-Quality】: This Cap Is Made Of High-Quality And Durable Polycarbonate Material, Which Is Resistant To Corrosion, Oxidation, Discoloration And Rust, And Has A Long Service Life. Beautiful Appearance..
√【Oem Number】: K71-704-00.
Features
- Compatible with :Fits Drum Number 8-415 (After July 2009),Fits Drum Number 8-430 (After April 2013)
- OEM Number : K71-704-00
- Size : 3.5 Thread OD 12 Thread
- High-Quality : This cap is made of high-quality and durable polycarbonate material, which is resistant to corrosion, oxidation, discoloration and rust, and has a long service life. Beautiful appearance.
- Easy to install : Take off the old cap directly and screw on the new cap by hand The installation can be completed in a few minutes.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #17
XTPTFABS Rear Fender Harness Rear Fender Harness 8-Position Connector and The 6-Position Connector That Connects into The Rear taillight Circuit Board Compatible with Harley-Davidson 96-13
Asin: B0C6LYV5Y6 | Model: DS21201060 | PartNumber: DS21201060
√【Package Included】:1×Harley-Davidson Rear Fender Harness (59 Inches Long) Part Number:Ds21201060.
√【Note】: Please Confirm Whether The Parts Conform To Your Car Before Purchasing..
√【Quality Assurance】:Plug-N-Play Taillight Fender Wiring Harness 100% Brand New And High Quality.The Products Have Been Strictly Inspected And Tested Before Leaving. Perfect Matching Oem Color-Coded Wiring Harness. Direct Replacement, Not Require Any Modification..
√【Item Fitment】:Rear Fender Harness Compatible With(Sportster 1999-2003), (Dyna 1997-2011), (Softail 1996-2010), (Road King & Electra Glide 1997-2013) (Road Glide 1998-2009) (Street Glide 2006-2009) 8-Position Multilock To 6 Position Multilock..
Features
- Compatible With :Compatible with Harley-Davidson 96-13.Plug-N-Play Taillight Fender Wiring Harness Complete with 8-position connector that attaches under the seat and the 6-position connector that connects into the rear taillight circuit board.
- Item Fitment :Rear fender harness Compatible With(Sportster 1999-2003), (Dyna 1997-2011), (Softail 1996-2010), (Road King & Electra Glide 1997-2013) (Road Glide 1998-2009) (Street Glide 2006-2009) 8-Position Multilock to 6 position Multilock.
- Package Included :1 Harley-Davidson Rear Fender Harness (59 inches long) Part Number:DS21201060
- Quality Assurance :Plug-N-Play Taillight Fender Wiring Harness 100% brand new and high quality.The Products Have Been Strictly Inspected And Tested Before Leaving. Perfect matching OEM color-coded wiring harness. Direct replacement, NOT require any modification.
- Note : Please confirm whether the parts conform to your car before purchasing.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #18
XTPTFABS Black Fuel Fill Vent Hose kit/Gas Hoses w/ 4 Clamps Compatible With 1997 1998 1999 2000 2001 Jeep XJ Cherokee JXJ JXJV,52100131AD, 52100132AB
Asin: B0BRZ4VN78
√【High-Quality】: Made Of High-Quality Materials And Subjected To Strict Quality Testing To Ensure Oe Fit, Shape And Function..
√【Service 】: If You Encounter Problems During Use, Please Contact Me Immediately.
√【Easy To Install】:The Part Is Easy And Quick To Install. Simply Remove And Replace The Old Or Damaged Parts, Which Can Be Completed In 10 Minutes, Improving The Time Efficiency..
√【Replace Part Number】:Fuel Filler Vent Hose Replace 52100131, 52100132Ab, 52100131Ad.
Features
- Compatible with :Compatible With 97 - 01 Jeep XJ Cherokee JXJ JXJV
- Replace Part Number :Fuel filler vent hose replace 52100131, 52100132AB, 52100131AD
- High-Quality : Made of high-quality materials and subjected to strict quality testing to ensure OE fit, shape and function.
- Easy to install :The part is easy and quick to install. Simply remove and replace the old or damaged parts, which can be completed in 10 minutes, improving the time efficiency.
- Service : If you encounter problems during use, please contact me immediately
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #19
XTPTFABS 2 Sets of Piston Rings Compatible with Kohler Engines 83mm Standard bore (no Oversize) 1.5mm Rings Style A. Fits Ch25, Ch26, Ch730, Ch735, and Others (Replace#24 108 14-S/ 2410814s)
Asin: B0BY21BM26 | Model: 24 108 14-S/ 2410814s | PartNumber: 24 108 14-S/ 2410814s
√【Perfectly Fit】:The Products Have Been Strictly Inspected And Tested Before Leaving The Factory.Perfect Replacement For An Original Part..
√【Note】:The Piston Ring Listing Is Quantity For 2 Piston.Please Measure Your Piston Ring Thickness Before Ordering, If Your Rings Measure 1.2Mm These Piston Rings Will Not Work..
√【Simple Installation】:Direct Replacement, Not Require Any Modification.Kohler Has Used 2 Different Ring Thickness On These Engines Listed Above, Please Measure The Top Ring Thickness To Ensure Correct Rings Before Ordering. Note: Please Look At Your Piston To Make Sure You Have Style [A] Piston Which Requires 1.5Mm Thick Top Ring.
√【Specification】:For Kohler Piston Rings, (Std) 83Mm, 24 108 14-S, Style A, 1St.Ring :1.50Mm; 2Nd.Ring : 1.50Mm; Oil Ring : 3.00Mm (Size :Std) 1St Ring Is A Non All Black Rectangular Oil Ring.2Nd. Ring Is A Fully Black Rectangular Ring..
Features
- Compatible With : Fits Kohler Engines CH25, CH26, CH730, CH735, CH740, CH745, CH750 and others with standard bore (no oversize) 1.5mm Rings Style A.
- Specification :For Kohler Piston Rings, (Std) 83mm, 24 108 14-S, Style A, 1st.Ring :1.50MM; 2nd.Ring : 1.50MM; Oil Ring : 3.00MM (Size :STD) 1st Ring is a non all black rectangular oil ring.2nd. Ring is a fully black rectangular ring.
- Perfectly Fit :The Products Have Been Strictly Inspected And Tested Before Leaving The Factory.Perfect replacement for an original part.
- Simple installation :Direct replacement, NOT require any modification.Kohler Has Used 2 Different Ring Thickness On These Engines Listed Above, Please Measure The Top Ring Thickness To Ensure Correct Rings Before Ordering. Note: Please Look At Your Piston To Make Sure You Have Style [A] Piston Which Requires 1.5mm Thick Top Ring
- Note :The piston ring listing is quantity for 2 piston.Please measure your piston ring thickness before ordering, if your rings measure 1.2mm these piston rings will not work.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #20
XTPTFABS Oil Bath Dust Caps, K71-704-00,Compatible with Dexter 9k-10K 8-415 430 General Duty Axles Built After July 2009, for Dexter 9K 10K 3.5" Threads Trailer Axle Plastic Cover 21-88 Oil Caps,2PCS
Asin: B0BQJ87FPN | Model: K71-704-00 8-415 | PartNumber: K71-704-00 8-415 | Ean: 0701063851522 | UPC: 701063851522
√【Size】: 3.5" Thread Od 12 Thread Oil Bath Dust Caps.
√【Easy To Install】: Take Off The Old Cap Directly And Screw On The New Cap By Hand The Installation Can Be Completed In A Few Minutes..
√【High-Quality】: This Cap Is Made Of High-Quality And Durable Polycarbonate Material, Which Is Resistant To Corrosion, Oxidation, Discoloration And Rust, And Has A Long Service Life. Beautiful Appearance..
√【Oe Number】: K71-704-00 8-415.
Features
- Compatible with :Fits Drum Number 8-415 (After July 2009),Fits Drum Number 8-430 (After April 2013)
- OE Number : K71-704-00 8-415
- Size : 3.5 Thread OD 12 Thread Oil Bath Dust Caps
- High-Quality : This cap is made of high-quality and durable polycarbonate material, which is resistant to corrosion, oxidation, discoloration and rust, and has a long service life. Beautiful appearance.
- Easy to install : Take off the old cap directly and screw on the new cap by hand The installation can be completed in a few minutes.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #21
Top Wind Trailer Jack Crank Handle (Curt 28921) Cordless Drill Adapter with Accessories, Aluminum The Adapter XTPTFABS
Asin: B0C44V7NGK | Model: Curt 28921 | PartNumber: Curt 28921
Please Verify That This Will Fit Your Application.Hex Size Is 3/4", Shaft Hole Is 1/2", And Thru Hole Is 1/4". Also Please Note That Some Trailer Jacks Use Metric Hardware, You Can Either Install Using Your Original Hardware, Or Open Thru Hole Up Slightly To 1/4" To Use Included Stainless Hardware..
We Suggest That Customers Check The List And Dimensions To See If They Match Your Desired Parts..
We Do Not Recommend The Use Of An Impact Gun.Most Cordless Drills Have Adequate Torque On Slow Speed.Use A Cordless Drill On Slow Speed With A 6 Point 3/4" Socket To Actuate Front Jack..
Our Products Include Cordless Drill Adapter（Aluminum Adapter）,Stainless Steel Hardware (2 Washers, Bolt And Nut),3/8" Drive Cordless Drill Socket Adapter And Quick Release Pin..
Features
- Replace your top wind trailer jack crank handle (Curt 28921) with our cordless drill adapter.With stainless steel hardware (2 washers, bolt and nut),3/8" drive cordless drill socket adapter and quick release pin.This allows you to remove the adapter as an added trailer theft deterrent making the trailer jack inoperable.
- Our products include Cordless Drill Adapter Aluminum adapter ,stainless steel hardware (2 washers, bolt and nut),3/8 drive cordless drill socket adapter and quick release pin.
- Please verify that this will fit your application.Hex size is 3/4, shaft hole is 1/2, and thru hole is 1/4. Also please note that some trailer jacks use metric hardware, you can either install using your original hardware, or open thru hole up slightly to 1/4 to use included stainless hardware.
- We do not recommend the use of an impact gun.most cordless drills have adequate torque on slow speed.Use a cordless drill on slow speed with a 6 point 3/4 socket to actuate front jack.
- We suggest that customers check the list and dimensions to see if they match your desired parts.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Dimensions: 1.58 x 2.36 x 2.36 Inches
Warranty: 1 year
See On Amazon #22
XTPTFABS 10PCS 45MM Excavator Bucket Pin Shims,Bucket Pin Shims Kit Compatible with Komatsu Cat Bobcat Kubota Takeuchi Case 1.5mm thick
Asin: B0BW3QBF4R | Model: 45MM Excavator Bucket Pin Shims | PartNumber: 45MM Excavator Bucket Pin Shims
√【Product Feature】:Bucket Pin Shims Are Machined Slightly Oversized (Id--- 46Mm; Od---100Mm) For Easier Installation, Grease Passage And Fitment On Deformed Pins..
√【Note】:Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing..
√【Effection And Purpose】:Makes Loose Joints Tighter - From Bucket To Boom.Blocks Dirt Spillover From Entering Your Bucket Pins - The Worst Pin For Wear Is The Pin Closest To The Dirt.Increases Grease Intervals - Stop Losing Grease From Loose Joints..
√【Material】:Polyethylene, Oil Resistance, High Temperature Resistance, Abrasion Resistance.Less Friction And Noise Than Metal Shims..
Features
- Compatible with Compatible with Cat Kubota Deere Komatsu.(10x) 1.5mm thick shims for 45mm pins Fits variety of small heavy equipment.
- Material :Polyethylene, Oil resistance, high temperature resistance, abrasion resistance.Less friction and noise than metal shims.
- Product Feature :Bucket pin shims are machined slightly oversized (ID--- 46mm; OD---100mm) for easier installation, grease passage and fitment on deformed pins.
- Effection And Purpose :Makes loose joints tighter - from bucket to boom.Blocks dirt spillover from entering your bucket pins - the worst pin for wear is the pin closest to the dirt.Increases grease intervals - stop losing grease from loose joints.
- Note :Please confirm that the parts are the correct ones you need before purchasing.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon #23
XTPTFABS Truck Bed to Frame Bolt/Nut Kit Compatible with Ford F150 F250 F350 1987-1996
Asin: B0CD71LQNK | Model: Truck Bed To Frame Bolt / Nut Kit | PartNumber: Truck Bed To Frame Bolt / Nut Kit
√【Simple Installation】:Direct Replacement, Not Require Any Modification.Solve The Problem Of Loosening The Truck Base Due To Rust Or Missing Hardware For You..
√【Note】:Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification.
√【High-Quality】:Made From High-Quality Materials For Ultimate Durability Manufactured To Meet Or Exceed Strict Quality Requirements.Durable Steel Structure With Fine Threads And Uniform Force, High Hardness, And No Deformation.Has Good Surface Roughness And Aesthetics, High Wear Resistance, Corrosion Resistance, And Strong Oxidation Resistance In Humid Environments.
√【Packaging Includes】:8Pcs Bolt And 8Pcs Nut.
Features
- Compatible With :Truck Bed To Frame Bolt / Nut Kit Compatible With Ford F150 F250 F350 1987-1996
- Packaging includes :8PCS Bolt and 8PCS Nut
- Simple Installation :Direct replacement, NOT require any modification.Solve the problem of loosening the truck base due to rust or missing hardware for you.
- High-Quality :Made from high-quality materials for ultimate durability Manufactured to meet or exceed strict quality requirements.Durable steel structure with fine threads and uniform force, high hardness, and no deformation.Has good surface roughness and aesthetics, high wear resistance, corrosion resistance, and strong oxidation resistance in humid environments
- Note :Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #24
XTPTFABS 2PCS Brake & Clutch Pedal Rubber Pads Set F07A-2457-AA Compatible with 1991-2007 Ford Ranger 1994-2007 Mazda B2500 Thru B4000
Asin: B0BRXGH4RR | Model: F07A-2457-AA | PartNumber: F07A-2457-AA
√【Note】: If You're Unsure If This Fits Your Truck: Metal Base For Pad Is 1 7/8 X 2 1/4.
√【Service 】: If You Encounter Problems During Use, Please Contact Me Immediately.
√【Easy To Install】:Some Innovated Ways To Install These New Pads :1.Heat The Back Of The Pads With A Hair Drier. (Wear Approved Oven Style Gloves)2.Drop The Pads In A Pot Of Boiling Water For 1-2 Minute (Wear Approved Oven Style Gloves)3.Place Pads Open End Up In The Sun For 10-20 Minutes 4.Only Tool Needed: Short Stubby Flat Head Screw Driver.
√【Oem Number】: F07a-2457-Aa.
Features
- Compatible with :Compatible With 1991-2007 Ford Ranger 1994-2007 Mazda B2500 thru B4000
- OEM Number : F07A-2457-AA
- Note : If you're unsure if this fits your truck: metal base for pad is 1 7/8 x 2 1/4
- Easy to install :Some innovated ways to install these new pads :1.Heat the back of the pads with a hair drier. (wear approved oven style gloves)2.Drop the pads in a pot of boiling water for 1-2 minute (wear approved oven style gloves)3.Place pads open end up in the sun for 10-20 minutes 4.Only tool needed: short stubby flat head screw driver
- Service : If you encounter problems during use, please contact me immediately
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #25
XTPTFABS 6 pin to CAN OBD2 OBDII Diagnostic Tool Cable Adapter Obd2 Motorcycle Adapter Compatible with BRP Moto ATV UTV Motorcycle Bike Clut
Asin: B0BRXWPTHR | Model: OBD2 OBDII Diagnostic Tool Cable | PartNumber: OBD2 OBDII Diagnostic Tool Cable
This Cable Will Allow You To Connect Any Can Obd2 Code Reader Or Elm 327 V.1.5 Bluetooth To Your Motorbike's Brp Computer..
Diagnostic Adapter + Appropriate Interface / Scanner Allows You To Read Live Data In Real-Time From Your Engine Using The Obd2 Smartphone Application..
The Elm327 V.1.5 Scanners That Communicate With The Bluetooth / Usb Or Wifi Of Our Phone Can Be Used While Driving To Read The Engine Parameters In Real Time, Using Free Software From The Googleplay Store..
Please Ensure Your Diagnostic Interface Is Compatible And Can Be Used With Obd Adaptors.Compatible With Can Am X3 Obd2 Adapter,Etc.
Features
- Obd2 motorcycle adapter will allow you to connect your diagnostic interface equipped with a socket 16-pin OBD2 - OBDII to the 6-pin connector of your motorcycle BRP
- Please ensure your diagnostic interface is compatible and can be used with OBD adaptors.Compatible with can am x3 obd2 adapter,etc
- This cable will allow you to connect any CAN OBD2 code reader or ELM 327 v.1.5 bluetooth to your motorbike's BRP computer.
- The ELM327 v.1.5 scanners that communicate with the bluetooth / USB or WiFi of our phone can be used while driving to read the engine parameters in real time, using free software from the GooglePlay store.
- Diagnostic adapter + appropriate interface / scanner allows you to read live data in real-time from your engine using the OBD2 smartphone application.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Weight: 0.20 Pounds
Warranty: 1 Year
See On Amazon #26
XTPTFABS 22mm X 1.5 Soot Sensor Repair Fitting(1PCS) for Diesel PM/particulate/soot Sensor Repair Fitting/Mount/Weld Bung 22PRTCL
Asin: B0BRXHGCQT | Model: 22PRTCL | PartNumber: 22PRTCL
√【Features】:Sensor Repair Fitting Is Made Of High-Quality Materials,Durable, Easy Installation, No Drilling Required.
√【Service 】:Replace Old And Broken Weld Bung,Restore Your Automobile To Good Driving Condition! If You Encounter Problems During Use, Please Contact Me Immediately.
√【Easy To Install】:The Part Is Easy And Quick To Install. Simply Remove And Replace The Old Or Damaged Parts, Which Can Be Completed In 10 Minutes, Improving The Time Efficiency..
√【Part Number】: 22Prtcl.Include 1 Pcs Soot Sensor Repair Fitting(M22 X 1.5 Thread).
Features
- Compatible with :For use with many 22mm x 1.50 Diesel weld bung for Particulate bung,Particulate fitting, Particulate boss,PM sensor
- Part Number : 22PRTCL.Include 1 pcs Soot Sensor Repair Fitting(M22 x 1.5 thread)
- Features :Sensor Repair Fitting is Made of high-quality materials,Durable, Easy Installation, No Drilling Required
- Easy to install :The part is easy and quick to install. Simply remove and replace the old or damaged parts, which can be completed in 10 minutes, improving the time efficiency.
- Service :Replace old and broken weld bung,Restore your automobile to good driving condition! If you encounter problems during use, please contact me immediately
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 Year
See On Amazon #27
XTPTFABSS Universal 2" Swivel Base Floor Mount & 2" Column Polished Aluminum keyed Steering Column Mount Combo Compatible with Vehicles with 2" Diameter Steering Columns
Asin: B0C4GCDBLY | Model: 2310000030 FR20114 | PartNumber: 2310000030 FR20114
√【Product Description】:This Is A Brand New After Market Style Swivel Base Steering Column Floor Mount, 2" Diameter Kit. This Mount Is Including Set Screws. Also Included In This Listing Is Aluminum Universal Steering Column Keyed No Drop 2" Column Polished Aluminum Keyed Column Mount..
√【Note】:Bolts And Screws For Simple Installation.Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification.Professional Installation Is Highly Recommended..
√【Package Included】:2" Swivel Base Floor Mount & Aluminum Universal Steering Column Keyed No Drop 2" Column Polished Aluminum Keyed Column Mount.Including All Items In Our Pictures..
√【Compatible With】:Gm (Chevy, Gmc, Pontiac, Cadillac, Buick, Oldsmobile) Fits All 2 Inch Diameter (Most Common) Aftermarket Columns Including Ididit, Flaming River, Billet Specialties, Pro Comp, Etc..
Features
- Applicable scenario :Fits 2" diameter columns found in the most popular aftermarket columns Fits all 2 inch diameter (most common) aftermarket columns including Ididit, Flaming River, Billet Specialties, Pro Comp.
- Compatible with :GM (Chevy, GMC, Pontiac, Cadillac, Buick, Oldsmobile) Fits all 2 inch diameter (most common) aftermarket columns including Ididit, Flaming River, Billet Specialties, Pro Comp, Etc.
- Product Description :This is a brand new after market style swivel base steering column floor mount, 2 diameter kit. This mount is including set screws. Also included in this listing is Aluminum Universal Steering Column Keyed No Drop 2 Column Polished Aluminum keyed Column Mount.
- Package Included :2 Swivel Base Floor Mount & Aluminum Universal Steering Column Keyed No Drop 2 Column Polished Aluminum keyed Column Mount.Including all items in our pictures.
- Note :Bolts and screws for simple installation.Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.Professional Installation is Highly Recommended.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABSS
Warranty: 1 YEAR
See On Amazon #28
XTPTFABS Rear Tailgate Handle Exterior Textured Lever Rear Liftgate Latch Handle Repair Kit Set Compatible with 03-09 Hummer H2 SUV (Replace #15135441 Black).
Asin: B0BVV9ND8T | Model: 15135441 13767004 | PartNumber: 15135441 13767004
√【Direct Replacement】:This Liftgate Latch Handle Is Designed To Match The Fit And Function Of The Original Handle On Specified Vehicles. It Can Definitely Fit Your Car And Present Perfectly On Your Car, Bringing More Beauty To Your Car..
√【Note】:Please Confirm Whether The Parts Conform To Your Car Before Purchasing..
√【Quality Assurance】:Rear Tailgate Handle Exterior Textured Lever 100% Brand New And High Quality.The Products Have Been Strictly Inspected And Tested Before Leaving The Factory.Perfect Replacement For An Original Part. It Is Perfectly Matched To The Original Vehicle After Installation..
√【Part Number】: 15135441 13767004 97503.
Features
- Compatible with :Compatible With 2003-2009 H2 Hummer Rear Tailgate Handle Exterior Textured Lever.Fit for 2003-2009 Hummer H2 Base Sport Utility 4-Door
- Part Number : 15135441 13767004 97503
- Direct replacement :This liftgate latch handle is designed to match the fit and function of the original handle on specified vehicles. it can definitely fit your car and present perfectly on your car, bringing more beauty to your car.
- Quality Assurance :Rear Tailgate Handle Exterior Textured Lever 100% brand new and high quality.The Products Have Been Strictly Inspected And Tested Before Leaving The Factory.Perfect replacement for an original part. It is perfectly matched to the original vehicle after installation.
- Note :Please confirm whether the parts conform to your car before purchasing.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Weight: 0.35 pounds
Warranty: 1 Year
See On Amazon #29
XTPTFABS Aluminum Sun Visor Repair Kit ram Sun Visor Repair kit Heavy Duty Sun Visor Clips Compatible with DO-DGE RAM 1500 Trucks 2019-2023 (1Set Black)-Made of Aluminum (1)
Asin: B0C5837WRR | Model: aluminum Sun Visor Repair Kit | PartNumber: aluminum Sun Visor Repair Kit
√【Package Included】:1Set Of Black Sun Visor Repair Kit.You Will Receive 1 Set Of Aluminum Visors Clips And 4 Black Screws. Simple Installation .The Only Tools You Need Is A T20 Torx Bit (Factory Screw Removal) And A #2 Phillips Head Screw Driver (Clip Installation)..
√【Simple Installation】:Only A Few Minutes，No Problem At All Install Direct Replacement Parts For Proper Fit.Remove The Factory "Outside" Screw Next To The Sunshade Pillar,Install The Clip, Screw It In To Capture The Strap On The Sunshade Pillar And Tighten It, You Will Now Have The Full Motion Of Your Sun Visor Again.This Clip Is Almost Hidden By The Sun Visor In The Storage Position..
√【Applicable Scenario】:Driver Left Or Right Sun Visor Bracket Repair Kits, It Is Used For Restores And Repairs Vehicle Sagging Sun Visor.Our Visors Clips Effectively Reinforce The Pivot On The Post Of The Sun Visor, And Permanently Fix Your Problem..
√【High Quality Material】:This Sun Visor Holder Made For High-Quality Aluminum. Made Of Aluminum, Its Surface Adopts Aluminum Alloy Sandblasting Technology, Improving Its Service Life And Corrosion Resistance. The Surface Smoothness Is Good, And The Product Is Very Beautiful..
Features
- Compatible With :The aluminum visor repair set is compatible DO-DGE RAM 1500 TRUCKS 2019-2023
- High Quality Material :This sun visor holder made for high-quality aluminum. Made of aluminum, its surface adopts aluminum alloy sandblasting technology, improving its service life and corrosion resistance. The surface smoothness is good, and the product is very beautiful.
- Package Included :1Set of Black Sun visor repair kit.You will receive 1 set of aluminum visors clips and 4 black screws. Simple installation .The only tools you need is a T20 torx bit (factory screw removal) and a #2 Phillips head screw driver (clip installation).
- Applicable scenario :Driver left or right sun visor bracket repair kits, it is used for restores and repairs vehicle sagging sun visor.Our visors clips effectively reinforce the pivot on the post of the sun visor, and permanently fix your problem.
- Simple Installation :Only a few minutes no problem at all install direct replacement parts for proper fit.Remove the factory outside screw next to the sunshade pillar,Install the clip, screw it in to capture the strap on the sunshade pillar and tighten it, You will now have the full motion of your sun visor again.This clip is almost hidden by the sun visor in the storage position.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 YEAR
See On Amazon #30
XTPTFABS Tire Machine Changer Table Cylinder Seal kit Compatible with Coats Tire Changers 5060 5030 5070 6050 6060 7050 7055and More(Replace #8183811,183811)
Asin: B0CJ6Q7KR3
√【Package Included】: The Kit Includes Everything Needed To Replace All The Rubber Seals, Large Rubber Piston ,O Rings And Shaft Seals..
√【Note】:Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification..
√【Simple Installation】: These Cylinders Are Easy To Rebuild, Only Requiring Our Sealing Kit And Basic Manual Tools And Knowledge. The Reconstruction And Installation Can Be Completed In A Very Short Time..
√【Applicable Scenario】: This Is A Table Top Cylinder Seal Kit That Can Be Found On Newer Coats* Tire Changers.This Kits Is Used On Machines That Have A Single Cylinder That Operates The Clamping Jaws On The Top Of The Machine..
Features
- Compatible With : Table Top Cylinder Seal Kit that Fits many newer Coats Tire Changers.This cylinder seal kit fits the following Coats Model Machines 5030 5040 5045 5050 5060 5065 6050 6060 6065 7050 7055 7060 7065 7660 7665 (Fits both A models, E models AX models and EX models)
- Applicable scenario : This is a Table Top Cylinder Seal Kit that can be found on newer Coats* Tire Changers.This kits is used on machines that have a single cylinder that operates the clamping jaws on the top of the machine.
- Package Included : The kit includes everything needed to replace all the rubber seals, large rubber piston ,o rings and shaft seals.
- Simple Installation : These cylinders are easy to rebuild, only requiring our sealing kit and basic manual tools and knowledge. The reconstruction and installation can be completed in a very short time.
- Note :Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
See On Amazon