YG1 - Buying Guide
Last Updated: 04/30/2024
Share on
Bestselling from YG1 on Amazon
- YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End,...
- YG-1 - G4315 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank wi...
- YG-1 - 0161L High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral,...
- YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Fi...
- YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F4423 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F4485 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
- YG-1 - F8162 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End,...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
YG-1 - F4323 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance
Asin: B00F8T4ST2 | Model: F4323 | PartNumber: F4323 | Ean: 5899405916703
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.02 pounds
See On Amazon #2
YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance
Asin: B00F8TXMKI | Model: F8403 | PartNumber: F8403 | Ean: 5899405984351
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 Pounds
See On Amazon #3
YG-1 - G4315 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M6-1 Thread Size, D5 Tolerance
Asin: B00F8UR51Y | Model: G4315 | PartNumber: G4315
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #4
YG-1 - 0161L High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral, 90 Degree, 1/4" Diameter x 2.76" Length (Pack of 1)
Asin: B009NN1UCC | Model: 0161L | PartNumber: 0161L | Ean: 0692579218520 | UPC: 692579218520
Made Of 8 Percent Cobalt And High Speed Steel.
A Larger Diameter In Respect To The Subsequent Drilling Tool Permit To Obtain The Centering And Chamfering Simultaneously.
For More Precise Centering Work On Nc/Cnc Machine.
90 Degree Point Angle.
Features
- NC spotting drill
- 90 Degree point angle
- Made of 8 percent cobalt and high speed steel
- For more precise centering work on NC/CNC machine
- A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.50 x 3.70 x 0.60 Inches | Weight: 0.07 Pounds
See On Amazon #5
YG-1 28593 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 3" Length, 1/2"
Asin: B0080AVYFW | Model: 28593 | PartNumber: 28593 | Ean: 0312333756494 | UPC: 312333756494
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.04 x 3.00 x 0.50 inches
See On Amazon #6
YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance
Asin: B00F8T68OK | Model: F4483 | PartNumber: F4483 | Ean: 7535001296945
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #7
YG-1 - F4423 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-28 Thread Size, H3 Tolerance
Asin: B00F8T5I9G | Model: F4423 | PartNumber: F4423 | Ean: 7535001119695
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #8
YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance
Asin: B00F8T88GG | Model: F4563 | PartNumber: F4563 | Ean: 7535001207460
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.9375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.9375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #9
YG-1 - F4485 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H5 Tolerance
Asin: B00F8T6F0M | Model: F4485 | PartNumber: F4485
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #10
YG-1 - F8162 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance
Asin: B00F8TWBIC | Model: F8162 | PartNumber: F8162 | Ean: 5899405927907
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.3125-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.3125-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #11
YG-1 28558 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 1-1/2" Length, 1/8"
Asin: B0080AVQRI | Model: 28558 | PartNumber: 28558 | Ean: 0635963995263 | UPC: 635963995263
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
First Available: 05/15/2017
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #12
YG1 NC Spotting Drill 8% Cobalt HSS 1/8, 3/16, 1/4" 120 Degree 3 Pc Set CNC
Asin: B01G9D33AU
Dimensions: 1/8" Diameter (D1), 0.472" Flute Length (L1) And 1.93" Overall Length (L2); 3/16" Diameter (D1), 0.590" Flute Length (L1) And 2.44" Overall Length (L2); 1/4" Diameter (D1), 0.669" Flute Length (L1) And 2.76" Overall Length (L2).
Application: For More Precise Centering Work On Nc/Cnc Machines. A Larger Diameter In Respect To The Subsequent Drilling Tool Permit To Obtain The Centering And Chamfering Simultaneously.
3 Pc. Set Includes Yg1 Cobalt Nc Spotting Drills In 1/8, 3/16, & 1/4" With A 120-Degree Angle.
Features
- Our part # YG1-10022
- 3 Pc. set includes YG1 cobalt NC spotting drills in 1/8, 3/16, & 1/4 with a 120-degree angle
- Dimensions: 1/8 diameter (D1), 0.472 flute length (L1) and 1.93 overall length (L2); 3/16 diameter (D1), 0.590 flute length (L1) and 2.44 overall length (L2); 1/4 diameter (D1), 0.669 flute length (L1) and 2.76 overall length (L2)
- Application: For more precise centering work on NC/CNC machines. A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously
- See more on Amazon...
Brand: YG1 | Manufacturer: YG-1 America Inc.
Weight: 0.21 pounds
See On Amazon #13
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/8"-18 Thread Size, H3 Tolerance
Asin: B00F8TAEDQ | Model: F4663 | PartNumber: F4663
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
1.09375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 1.09375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #14
YG-1 - F8405 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H5 Tolerance
Asin: B00F8TXV8G | Model: F8405 | PartNumber: F8405 | Ean: 5899405992561
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.04 Pounds
See On Amazon #15
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D4 Tolerance -G4284
Asin: B00F8UQYEI | Model: G4284 | PartNumber: G4284 | Ean: 7241871141598
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #16
YG-1 - 2161L High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral, 120 Degree, 1/4" Diameter x 2-76/120" Length (Pack of 1)
Asin: B009NNFK96 | Model: 2161L | PartNumber: 2161L | Ean: 0371881828312 | UPC: 371881828312
Made Of 8 Percent Cobalt And High Speed Steel.
A Larger Diameter In Respect To The Subsequent Drilling Tool Permit To Obtain The Centering And Chamfering Simultaneously.
For More Precise Centering Work On Nc/Cnc Machine.
120 Degree Point Angle.
Features
- NC spotting drill
- 120 Degree point angle
- Made of 8 percent cobalt and high speed steel
- For more precise centering work on NC/CNC machine
- A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.03 Pounds
See On Amazon #17
YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance
Asin: B00F8T4Z18 | Model: F4343 | PartNumber: F4343 | Ean: 7241871141567
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #18
YG-1 - 0321L High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral, 90 Degree, 1/2" Diameter x 4-1/64" Length (Pack of 1)
Asin: B009NN1XC4 | Model: 0321L | PartNumber: 0321L
Made Of 8 Percent Cobalt And High Speed Steel.
A Larger Diameter In Respect To The Subsequent Drilling Tool Permit To Obtain The Centering And Chamfering Simultaneously.
For More Precise Centering Work On Nc/Cnc Machine.
90 Degree Point Angle.
Features
- NC spotting drill
- 90 Degree point angle
- Made of 8 percent cobalt and high speed steel
- For more precise centering work on NC/CNC machine
- A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.13 pounds
See On Amazon #19
YG-1 G1 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Modified Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance
Asin: B00F8UAOJO | Model: G1162 | PartNumber: G1162 | Ean: 7241871141635
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.3125-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.3125-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.02 Pounds
See On Amazon #20
YG-1 28573 Carbide Alu-Power End Mill, 3 Flute, 45 Degree Helix, Regular Length, Square, Uncoated Finish, 2-1/2" Length, 1/4"
Asin: B0080AVSTY | Model: 28573 | PartNumber: 28573 | Ean: 0635963995300 | UPC: 635963995300
Improved Surface Roughness-Cylindrical Margin Which Is Controlled Tightly.
Superior Chip Evacuation.
Maximum-Metal Removal Rate.
3Flute And 45° Helix Allow Harmonic Balance At High Speed Condition And Smooth Cutting.
Features
- High velocity milling of aluminum & other non-ferrous materials
- 3flute and 45 helix allow harmonic balance at high speed condition and smooth cutting
- Improved surface roughness-cylindrical margin which is controlled tightly
- Maximum-metal removal rate
- Superior chip evacuation
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.04 x 2.50 x 0.25 inches | Weight: 0.07 pounds
See On Amazon #21
YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080C5MJ4 | Model: 55904 | PartNumber: 55904 | Ean: 0200000559045 | UPC: 200000559045
Four Flutes Produce A Better Finish Than Fewer Flutes.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 0.39 x 5.51 x 0.39 inches | Weight: 0.04 pounds
See On Amazon #22
HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance
Asin: B00F8T5O36 | Model: F4443 | PartNumber: F4443
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.6875-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.6875-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #23
YG-1 52558TC Carbide Ball Nose End Mill, 2 Flute, Extra Long Length, TiCN Finish, 3" Length, 1/8"
Asin: B012G10C6W | Model: 52558TC | PartNumber: 52558TC
Yg-1 Is Based In South Korea.
Package Dimensions: 3" L X 1" W X 1" H.
Yg-1, High Quality Cutting Tools.
Features
- Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics
- YG-1, High Quality Cutting Tools
- YG-1 is based in South Korea
- Package Dimensions: 3 L x 1 W x 1 H
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
See On Amazon #24
YG-1 - 53558 E5062 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080D35II | Model: 53558 | PartNumber: 53558
Four Flutes Produce A Better Finish Than Fewer Flutes.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #25
YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance
Asin: B00F8T4BXU | Model: F4283 | PartNumber: F4283
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #26
YG-1 - 0081L High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral, 90 Degree, 1/8" Diameter x 1-119/128" Length (Pack of 1)
Asin: B009NN1SI8 | Model: 0081L | PartNumber: 0081L
Made Of 8 Percent Cobalt And High Speed Steel.
A Larger Diameter In Respect To The Subsequent Drilling Tool Permit To Obtain The Centering And Chamfering Simultaneously.
For More Precise Centering Work On Nc/Cnc Machine.
90 Degree Point Angle.
Features
- NC spotting drill
- 90 Degree point angle
- Made of 8 percent cobalt and high speed steel
- For more precise centering work on NC/CNC machine
- A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Dimensions: 0.30 x 3.10 x 0.40 inches | Weight: 0.16 Pounds
See On Amazon #27
YG-1 - F4243 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance
Asin: B00F8T45AE | Model: F4243 | PartNumber: F4243 | Ean: 5899406037711
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #28
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H5 Tolerance - F4445
Asin: B00F8T5VPW | Model: F4445 | PartNumber: F4445
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.6875-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.6875-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #29
YG-1 Z7 Series Vanadium Alloy HSS Roll Form Tap with Oil Groove, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H5 Tolerance
Asin: B00F8ZRA7S | Model: Z7445 | PartNumber: Z7445
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Right-Hand Cut Tools Have A Cutting Action That Engages When They Are Run In A Clockwise Direction.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #30
YG-1 BS Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, M6.0-1.0 Thread Size, D5 Tolerance
Asin: B00F8QLM6W | Model: BS315 | PartNumber: BS315
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.433-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.433-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon