YOGEIER - Buying Guide

Bestselling from YOGEIER on Amazon

1. YOGEIER Car Led Bulb, Led Combination Set of 24 Sets, Used for Car Interior/Indoor Map Dome/ Trunk /...
2. Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, P...
3. Brake Fluid Liquid Tester Pen,1PC DOT 3 DOT 4 DOT 5.1 Brake Fluid Liquid Tester Pen, Car Diagnostic ...
4. YOGEIER Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch), Universal Exhaust Insulator Muffler Hang...
5. 10Ft Car Windshield Weather Strip Car Windshield Sunroof Seal Rubber Strip Trim, T Shape Leak Sound ...

Features

• High-Quality Materials: Vehicle LED lights adopt a variety of LED chips and high-quality circuit boards, can stably and persistently emit white light, almost no delay, no flicker, so that you can see more clearly at night. Bulb life up to 50,000 hours, can be used for a long time.
• Multi-Combination: The whole set of vehicle LED lights are equipped with 24 LED lights (8 for each) of three models (25 mm *10 mm, 30 mm *31 mm, 40 mm *10 mm), which is enough to meet your replacement needs in life.
• Wide Range Of Applications: It can be indoor map light, ceiling light, license plate light, parking light, corner light, taillight, side marker light, instrument light, cargo light, taillight, ladder light, auxiliary light, etc.
• High Applicability: LED automotive interior lights are compatible with all kinds of vehicles, including cars, trucks, vans, SUVs, etc., to help you drive out the darkness and enhance your night driving experience.
• Easy Installation: Just plug the LED light in the car into the socket when installing, no other tools are needed. To press the product pin into place first, and then turn the card. Please feel free to contact us if you have any further questions.
• See more on Amazon...

Features

• PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
• DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8 drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
• FEATURES: 7/8 (22mm) socket fits most oxygen sensors, works with any 3/8 drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
• FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
• WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.
• See more on Amazon...

Features

• High quality: This brake fluid tester is made of nickel-plated metal probe, which is resistant to oil and oxidation and not easy to corrode. The shell is black matte plastic, better anti-slip and good body texture. The change of conductivity can be used to determine the change of moisture in the brake fluid.
• Safe driving: This brake fluid tester comes with 5 LED indicators to show the percentage of moisture in the brake fluid. This product can quickly detect the health of the car's brake fluid, provide you with more accurate test results, and remind you to replace the brake fluid when necessary to avoid traffic accidents.
• Convenient and quick: This brake fluid tester is easy to use, press the button, insert the test pen, the indicator is accurate to 1%, and you can receive the result in seconds. To save electricity, the test pen will automatically turn off the power after 20 seconds each use to save power.
• Scope of application: This brake fluid tester is suitable for testing the moisture content in DOT-3, DOT-4, DOT-5.1 brake fluid. It is also very convenient for personal use and this product is widely used in personal workshops, repair shops and dealer workshops.
• Easy to carry: No cable connector design, small size, light weight, easy to carry and use. If you encounter any problem when using this product, please contact us and we will try our best to solve it for you.
• See more on Amazon...

Features

• Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket. Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use.
• Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the height and contact surface between the exhaust pipe and the body to prevent the exhaust pipe from scratching along the ground.
• Dimensions: Width: 73mm (2.9); Height: 47mm (1.9); Depth: 20mm (0.8) Bore: 11mm (0.43). It is a universal vehicle tool for exhaust systems of cars, trucks, jeeps and SUVs. Be sure to measure the size before purchasing, so as not to be inappropriate for use.
• Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the mounting nail on the exhaust pipe.
• What You Will Get: 4 rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and hitting the car body. It can safely fix the exhaust pipe above the ground, no matter how bumpy the car is on the road, there will be no abnormal noise.
• See more on Amazon...

Features

• High-quality material: The car front windshield strip is made of EPDM rubber material, which has good elasticity and toughness, easy to fold and bend, safe and non-toxic, durable and sturdy, more flexible, resistant to high temperature and cold. The sealing effect is good and can be used for a long time.
• Car weatherstrip: The T-shaped design of the weatherstrip can better fit your windows and body, sealing the gap between the window and body, front windshield, rear windshield, sunroof, frame gap. Prevent dust, water leakage, air leakage, reduce noise, make the car quieter and more comfortable.
• Easy installation: 1. Wipe with a cloth and keep the clean surface dry. 2. Tear off the red adhesive film, stick it where you need it, and cut the tape. 3. Try not to wash the car within 3 days to ensure stickiness. In winter, when the temperature is low, you can use a hair dryer to make it stick more firmly.
• Specifications: Width: 19MM/0.75 inches. We also have 14MM/0.55inch, two sizes of width for you to choose; different areas require different widths. See our description on the picture. Length: 10Ft, you can arbitrarily DIY cut the length you need to suit your car.
• Features: soft, high elasticity, smooth surface, anti-ultraviolet, environmentally friendly material, less odor, no harm to human body, suitable for various rounded corners and radii. If you are not satisfied with our products or have any suggestions, please contact us immediately, we will reply you within 24 hours.
• See more on Amazon...