bestarc - Buying Guide

Bestselling from bestarc on Amazon

1. Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital...
2. bestarc AG60P Plasma Cutter Consumables Cutting Torch Tip Nozzles 40 pcs Suitable for AG60 WSD60 AG6...
3. bestarc MIG Welder, 145Amps MIG145 Gas Gasless Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Synergic M...
4. Welding Coupons, 2 4" Mild Steel Welding Kit, 11 Gauge Welding Plate DIY Cuboid, Welding Practice fo...
5. bestarc Welding Kit 1/8" Aluminum Cube Contains Welding Coupons MIG, TIG, Arc, Stick, Gas, Gas P...
6. Bestarc Magnetic TIG Welding Torch Holder, MIG TIG Welding Accessories With Strong Magnet Base, Small
7. Welding Kit, 201 Stainless Steel Welding Coupons, 11 Gauge 2 2 Inch Welding Plate, Diy Welding Pract...
8. Pilot Arc Plasma Cutting Torch, AG60P 4 Meters High Frequency Air Plasma Cutting Torch AG60P Suitabl...
9. bestarc TIG Welding Torch, TIG17V 150Amp Air-Cooled Lift Tig Torch for bestarc MIG145, 13FT
10. Welding Kit, Folding Pentagon Ball Hexahedron, 2 2 Inch, 201 Stainless Steel Welding Coupons, Practi...

Features

• [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
• [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
• [Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
• [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
• [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.
• See more on Amazon...

Features

• Fit for : AG-60 AG-60P SG-55 WSD-60 Plasma cutter torch head
• Made of high quality material, provides longer service life and better experience
• Suits for professional workers, amateurs, home use, factory and garage
• This product is a consumable accessory of cutting machine
• Package includes: 5PCS wire guide, 5pcs shield cup, 15pcs nozzle, 15pcs electrode
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 MIG welder has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The flux core welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder 110v/220v with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
• Synergic Control: The 3 in 1 welder adopts IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, the user can also press the adjustment knob to individually adjusted the voltage 3V, making it accessible to both beginners and professionals.
• 110/220V Dual-Voltage: The gasless mig welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the MIG welder to work seamlessly in different power environments, providing greater convenience and applicability.
• Portable & Powerful: The MIG welder weighs just 13.7 pounds and comes with a shoulder strap for easy carrying and outdoor use. Package includes 1 MIG145 MIG welder machine, 1 MIG torch, 1 Earth clamp, 1 Stick holder, 1 0.040 Flux cored wire, 1 0.030 Solid wire, 1 0.030/0.035/0.040 Contact tip, 1 0.030/0.035 Wire feed rollers, 1 2 meters gas hose, 1 220V to 110V Wire adapter, 1 Shoulder strap, 1 User manual.
• See more on Amazon...

Features

• Premium welding training steel
• Help you practice welding skills and innovate
• precision machining
• 20 Pcs one pack, 2'' 4'' 11Ga/ 50 100 3mm fine cut rectangular steel. 11Gauge 3.05mm 0.11inch
• Suitable for beginners and professionals
• See more on Amazon...

Features

• Made of high-quality metal aluminum
• Premium tool for practicing welding skills and creativity
• Precision machining
• 10 PCs in one pack, 2'' 4'' fine cut rectangular Aluminum
• For both beginners and professionals
• See more on Amazon...

Features

• Sturdy: Welding torch holder surface is coated with anti-rust coating to ensure that the steel does not rust. After electroplating and polishing treatment, it indicates smooth and flat.
• Strong Magnetic Base: The MIG torch holder uses a strong magnet base that can be quickly attached to any steel or iron surface, keeping your torch stably fixed and safer. The base is connected using SC 4.8 screws and nuts.
• Free for Working Table: The strong magnetism of the base allows you to hang the torch holder upside down under the workbench for easy torch placement and helps to keep the torch away from desk debris, and the wires can also be arranged nicely.
• Universally Designed: Suitable for various TIG, MIG, MAG welding torches and plasma cutting torch. With multiple support points, it is convenient to place different sizes of welding guns or gas nozzles, is an indispensable tool in the tool room.
• Package Includes: 1pcs tig MIG welding torch holder, You'll need to attach the screws to the bracket and base yourself.
• See more on Amazon...

Features

• Premium welding training steel
• Practical gadgets to help you practice and create
• Precision machining
• 6 PCs in one pack, 2'' 2'' fine cut square steel plate
• Suitable for beginners and professionals
• See more on Amazon...

Features

• Standard length 13Ft long plasma cutting torch
• Pure copper joints, CNC integrated processing, optimal pure brass copper
• High Quality Plasma Cutting Torch AG60P
• Included consumables comes with one set of consumables (1 nozzle, 1 electrode, 1 ring, 1 cup) installed on torch head
• HF pilot arc Ignition, easy to start arc, 50/60A air plasma cutting torch/gun AG60/WSD60/SG55
• See more on Amazon...

Features

• Tig Torch Type: WP-17V 150Amps air-cooled TIG welding torch equipped with 13-FT long cable. 35% DC 140AMP, 35% AC 125AMP, Quick Connector: 10-25mm , Electrode Size: 0.5-2.4MM.
• Safety: TIG torch is made of flame retardant, heat resistant PVC sheath and high purity copper wire. Low resistance conductor, high heat dissipation performance, and can be used for a long time at high amperage current.
• Compatibility: TIG17V welding torch has lift TIG function. Comes with a quick plug connector :10-25mm and a premium 5/8 gas-powered hose connector. Suitable for the bestarc MIG145 and most MIG welder
• Enhanced Flexibility: The independent gas hose allows for a separate connection to the welding machine outlet or a direct connection to the argon meter, as it is designed to be detached from the power cord.
• Ergonomic Design: TIG-17V tig torch handle adopts ribbed design, easy to operate, and will not feel tired for a long time welding.
• See more on Amazon...

Features

• High strength, high wear resistance and durability
• Standard pentagonal welding plate can create DIY welding by itself, or challenge welding it into a spherical shape
• Welding coupons are helpful for professionals and beginners to practice, and long-term practice is very helpful for improving welding technology
• This product is stainless steel welding coupon, including 12 pieces
• Suitable for construction engineering, machinery manufacturing, garden iron, auto parts, DIY exercises, etc.
• See more on Amazon...

Features

• Excellent Performance: E71T-GS mig welding wire has excellent penetration, smooth arc action, high feed ability, less splash during welding, so that the weld is beautiful and clean.
• Wind-Resistant: Self-shielded gasless mig wire does not require protective gas and is suitable for outdoor applications under windy conditions with excellent wind resistance.
• Professional Packaging: The flux cored welding wire is packed with a vacuum seal to prevent moisture and dust from entering, ensuring the best welding performance and effect.
• Specification: Welding wire is made of AWS E71T-GS low carbon steel, 0.035 Diameter, 2lb. Helps you complete welding projects easily. Suitable for T-joints, butt welding and lap welding.
• Applications: Flux core wire 0.035 is designed for MIG welders and is compatible with most high frequency welders, suitable for both professional welders and beginners.
• See more on Amazon...

Features

• Premium welding training steel
• Help you practice welding skills and innovate
• Precision machining
• 6 PCs in one pack, 3'' 3'' fine cut square steel plate
• For both novices and professionals
• See more on Amazon...

Features

• BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
• The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
• Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
• Made of high quality material, provides longer service life and better experience. Fit for : AG-60 AG-60P SG-55 WSD-60.
• Package includes: 5PCS wire guide, 5pcs shield cup, 15pcs nozzle, 15pcs electrode
• See more on Amazon...

Features

• Pilot Arc Function This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• Dual-Voltage 110/220V Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
• Cutting Thickness The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.
• Made of high quality material, provides longer service life and better experience. Fit for : AG-60 AG-60P SG-55 WSD-60.
• Package includes: 5PCS wire guide, 5pcs shield cup, 15pcs nozzle, 15pcs electrode
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Synergic Control: The MIG welding machine adopts IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, the user can also press the adjustment knob to individually adjusted the voltage 3V, making it accessible to both beginners and professionals.
• 110/220V Dual-Voltage: The MIG welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the welder to work seamlessly in different power environments, providing greater convenience and applicability.
• Strong Magnetic Base: The MIG torch holder uses a strong magnet base that can be quickly attached to any steel or iron surface, keeping your torch stably fixed and safer. The base is connected using SC 4.8 screws and nuts.
• Universally Designed: Suitable for various TIG, MIG, MAG welding torches and plasma cutting torch. With multiple support points, it is convenient to place different sizes of welding guns or gas nozzles, is an indispensable tool in the tool room.
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Synergic Control: The MIG welding machine adopts IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, the user can also press the adjustment knob to individually adjusted the voltage 3V, making it accessible to both beginners and professionals.
• 110/220V Dual-Voltage: The MIG welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the welder to work seamlessly in different power environments, providing greater convenience and applicability.
• Strong Magnetic Base: The MIG torch holder uses a strong magnet base that can be quickly attached to any steel or iron surface, keeping your torch stably fixed and safer. The base is connected using SC 4.8 screws and nuts.
• Universally Designed: Suitable for various TIG, MIG, MAG welding torches and plasma cutting torch. With multiple support points, it is convenient to place different sizes of welding guns or gas nozzles, is an indispensable tool in the tool room.
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• 110/220V Dual-Voltage: The MIG welder supports 110/220V dual voltage, automatically identifying the input voltage, and clearly display through the front panel indicator. This design enables the welder to work seamlessly in different power environments, providing greater convenience and applicability.
• Tig Torch Type: WP-17V 150Amps air-cooled TIG welding torch equipped with 13-FT long cable. 35% DC 140AMP, 35% AC 125AMP, Quick Connector: 10-25mm , Electrode Size: 0.5-2.4MM.
• Compatibility: TIG17V welding torch has lift TIG function. Comes with a quick plug connector :10-25mm and a premium 5/8 gas-powered hose connector. Suitable for the bestarc MIG145 and most MIG welder
• Durable and Safety: TIG torch is made of flame retardant, heat resistant PVC sheath and high purity copper wire. Low resistance conductor, high heat dissipation performance, and can be used for a long time at high amperage current.
• See more on Amazon...

Features

• [Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• [Automatic Cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting.When you release the switch, the torch is still cutting.Press the switch again to stop the arc.
• [Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-90 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 250L/min.
• Made of high quality material, provides longer service life and better experience. Fit for : AG-60 AG-60P SG-55 WSD-60.
• Package includes: 2PCS wire guide, 2pcs shield cup, 10pcs nozzle, 10pcs electrode
• See more on Amazon...

Features

• Pilot Arc Function This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• Dual-Voltage 110/220V Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
• Cutting Thickness The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.
• Made of high quality material, provides longer service life and better experience. Fit for : AG-60 AG-60P SG-55 WSD-60.
• Package includes: 2PCS wire guide, 2pcs shield cup, 10pcs nozzle, 10pcs electrode
• See more on Amazon...

Features

• BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
• The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
• Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
• Made of high quality material, provides longer service life and better experience. Fit for : AG-60 AG-60P SG-55 WSD-60.
• Package includes: 2PCS wire guide, 2pcs shield cup, 10pcs nozzle, 10pcs electrode
• See more on Amazon...

Features

• [Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• [Automatic Cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting.When you release the switch, the torch is still cutting.Press the switch again to stop the arc.
• [Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-90 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 250L/min.
• [Cutting Thickness]: The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 15-40A, Under 220V current display is 15-65A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 45PSI; 20mm@65A 220V, 70 PSI.
• Package includes: 2PCS wire guide, 2pcs shield cup, 10pcs nozzle, 10pcs electrode
• See more on Amazon...

Features

• [Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• [Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
• [Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.
• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030/0.035/0.040 flux core wire size, 0.030 solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Synergic Control: The MIG welding machine adopt IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, users can also adjust the welding current according to their own welding habits, making it user-friendly for both beginners and professionals.
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
• Synergic Control: The MIG welding machine adopt IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, users can also adjust the welding current according to their own welding habits, making it user-friendly for both beginners and professionals.
• Specification: Welding wire is made of AWS E71T-GS low carbon steel, 0.035 + 0.030 Diameter, 2lb. Helps you complete welding projects easily. Suitable for T-joints, butt welding and lap welding.
• Excellent Performance: E71T-GS mig welding wire has excellent penetration, smooth arc action, high feed ability, less splash during welding, so that the weld is beautiful and clean.
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
• Synergic Control: The MIG welding machine adopt IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, users can also adjust the welding current according to their own welding habits, making it user-friendly for both beginners and professionals.
• Specification: Welding wire is made of AWS E71T-GS low carbon steel, 0.035 Diameter, 2lb. Helps you complete welding projects easily. Suitable for T-joints, butt welding and lap welding.
• Excellent Performance: E71T-GS mig welding wire has excellent penetration, smooth arc action, high feed ability, less splash during welding, so that the weld is beautiful and clean.
• See more on Amazon...

Features

• 3-IN-1 welder: The MIG145 welding machine has multi-function for Gas/Gasless MIG, Lift TIG and Stick. Maximum current is 145 amps, supporting the welding of gasless flux-cored mig wire and solid mig wire, and can use 0.030"/0.035"/0.040" flux core wire size, 0.030" solid wire size. The MIG welder excels in welding stainless steel, carbon steel, and even thicker steel, meeting diverse welding needs.
• Digital Screen Display: We design this MIG welding machine with full new technology. MIG welder with LED digital screen display voltage, current, and other parameters. You do not need to remove the helmet to assess the equipment status. You can make real-time adjustments, enhancing efficiency and accuracy.
• Synergic Control: The MIG welding machine adopt IGBT and integrated wire feed technology to automatically match the recommended voltage and wire feed speed (current). At the same time, users can also adjust the welding current according to their own welding habits, making it user-friendly for both beginners and professionals.
• Specification: Welding wire is made of AWS E71T-GS low carbon steel, 0.035 Diameter, 2lb. Helps you complete welding projects easily. Suitable for T-joints, butt welding and lap welding.
• Excellent Performance: E71T-GS mig welding wire has excellent penetration, smooth arc action, high feed ability, less splash during welding, so that the weld is beautiful and clean.
• See more on Amazon...

Features

• [Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• [Automatic Cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting.When you release the switch, the torch is still cutting.Press the switch again to stop the arc.
• [Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-90 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 250L/min.
• [Cutting Thickness]: The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 15-40A, Under 220V current display is 15-65A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 45PSI; 20mm@65A 220V, 70 PSI.
• Package includes: 5PCS wire guide, 5pcs shield cup, 15pcs nozzle, 15pcs electrode
• See more on Amazon...

Features

• [Pilot Arc Function]: BTC650DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
• [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
• [Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
• [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-40A, Under 220V current display is 15-65A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 45PSI; 20mm@65A 220V, 70 PSI.
• Package includes: 5PCS wire guide, 5pcs shield cup, 15pcs nozzle, 15pcs electrode
• See more on Amazon...

Features

• [Pilot Arc Function]: BTC650DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
• [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
• [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-40A, Under 220V current display is 15-65A, the maximum cutting thickness is recommended to be 14mm @ 40A 110V, 45PSI; 20mm@65A 220V, 70 PSI.
• HF pilot arc Ignition, easy to start arc, 50/60A air plasma cutting torch/gun AG60/WSD60/SG55
• High Quality Plasma Cutting Torch AG60P, Flex and Durable Neck, Pure copper joints, CNC integrated processing, optimal pure brass copper
• See more on Amazon...

Features

• [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
• [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
• [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
• HF pilot arc Ignition, easy to start arc, 50/60A air plasma cutting torch/gun AG60/WSD60/SG55
• Standard length 13Ft long plasma cutting torch, Pure copper joints, CNC integrated processing, optimal pure brass copper
• See more on Amazon...

Features

• [Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
• [Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
• [Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.
• HF pilot arc Ignition, easy to start arc, 50/60A air plasma cutting torch/gun AG60/WSD60/SG55
• Pure copper joints, CNC integrated processing, optimal pure brass copper, Included consumables comes with one set of consumables (1 nozzle, 1 electrode, 1 ring, 1 cup) installed on torch head
• See more on Amazon...