classAcustoms - Buying Guide
Last Updated: 05/05/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
classAcustoms 14" Non-Powered RV Roof Vent with White Wedge Style Lid 3" Garnish Ring and Plastic Crank Handle | 71111A-3G
Asin: B07YN4RFMP | Ean: 7426933331722
Manual Crank Handle To Open Lid - Mesh Screen.
Exterior Mounting Flange Dimensions (Sits On The Top Of Your Unit) 16 1/2” X 16 1/2” - No Mounting Hardware You Must Provide Caulk/Putty And Screws ****Warning All Vent Metal Flanges Are Very Sharp Use Caution When Touching Warning ****.
3" Inner Garnish / Trim Ring Heng's Part #90092 - 3" Vertical Leg (How Far Up Into Your Ceiling It Goes) 1 ¼” Wide Mounting Flange (Trim You See Inside On The Roof).
Rough Cut-Out Opening Dimensions (This Is The Hole You Will Need In Your Roof) 14 1/2” X 14 1/2.
Features
- Standard Universal RV Roof Vent (NON POWERED) w/ White Wedge Style Lid Heng's Industries Part # 71111A
- ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2 X 14 1/2
- MANUAL CRANK HANDLE to open lid - MESH SCREEN
- 3 Inner Garnish / Trim Ring Heng's Part #90092 - 3 Vertical Leg (How far up into your ceiling it goes) 1 Wide Mounting Flange (trim you see inside on the roof)
- EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 1/2 X 16 1/2 - NO MOUNTING HARDWARE you must provide caulk/putty and screws ****WARNING All Vent Metal Flanges are VERY SHARP use caution when touching WARNING ****
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Heng's Industries
See On Amazon #2
Class A Customs Premium Heavy Duty RV Camper Trailer Skylight - 18 x 26 OD / 14 x 22 ID Smoke - Install Kit P&S
Asin: B073ZNRVSM | Model: 1826-ESK-SM | PartNumber: 1826-ESK-SM | Ean: 0671065513806 | UPC: 671065513806
Mounting Flange Dimensions 17 7/8" X 26" Pre-Drilled For Easy Mounting.
Mounting Hardware Included 88" Putty Tape - 28 Pan Head Screws #8 X 1" - No Garnish Ring.
Dome Dimensions (This Is Roughly The Size Hole You Will Need In Your Unit) 14 1/8" X 22 1/8" (4 1/4" Height).
Color Smoke Tinted.
Features
- Premium design made from 50% stronger material than ordinary RV skylights
- COLOR Smoke Tinted
- MOUNTING FLANGE DIMENSIONS 17 7/8 X 26 Pre-drilled For Easy Mounting
- DOME DIMENSIONS (this is roughly the size hole you will need in your unit) 14 1/8 X 22 1/8 (4 1/4 height)
- MOUNTING HARDWARE INCLUDED 88 Putty tape - 28 Pan Head Screws #8 x 1 - NO GARNISH RING
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #3
classAcustoms Heng's 71111A-C RV Roof Vent White Wegde Lid Non Powered Manual Crank Lid with Built in Screen and Galvanized Frame
Asin: B09WZD371T
Screen And Opening Knob Included.
1" Garnish Trim Ring Included.
Galvanized Mounting Frame.
14" X 14" Rough Opening Required.
Features
- RV Roof Vent Non Powered
- 14 X 14 Rough Opening Required
- Screen and Opening Knob Included
- Galvanized Mounting Frame
- 1 Garnish Trim Ring Included
- See more on Amazon...
Brand: classAcustoms
Weight: 6.00 pounds
See On Amazon #4
Class A Customs Replacement Low Profile Metal Lid Only | for RV Roof Vents CAC90114 | Roof Vent Lid | Galvanized | Foam Insulated
Asin: B0BBKB37TH | Model: CAC90114 | PartNumber: CAC90114
Cross Bar Included - No Arm Crank.
No Mounting Hardware.
Fits Standard Newer Heng's 14" Rv Roof Vents, And Ventline With "C" Or "Curl" Style Hinge - Will Not Work On Pin Style Hinges.
Features
- Class A Customs Low Profile Metal Lid Only - this is not a complete vent, LID ONLY - Made of heavy gauge galvanized sheet metal
- FITS Standard Newer Heng's 14 RV Roof Vents, And Ventline with C or curl style hinge - will NOT work on pin style hinges
- Cross Bar included - No Arm Crank
- NO MOUNTING HARDWARE
- See more on Amazon...
Brand: classAcustoms
See On Amazon #5
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Half-Moon Side Air Vents | Two Pack | Black
Asin: B0887D1XTN | Ean: 7426933332927
Allows Air Circulation In The Trailer.
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #6
Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000
Asin: B007MSLA84 | Model: T-3000-1 | PartNumber: T-3000-1
Tank Built-In Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads.: (Two) 1.5" Balloon Style Threaded Female Npt Standard - Fitting Will Be Closed, To Use Remove Inner Membrane With Razor Knife (Two) .5" Threaded Female Npt Standard - Open Fitting, Unsealed.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 34.5” Longest Length (Not Including Fittings) X 12” X 17.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34.5 Longest Length (not including fittings) x 12 x 17.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5 Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5 Threaded Female NPT Standard - open fitting, unsealed
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 34.50 x 17.50 inches | Weight: 18.00 pounds
Warranty: Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank. Using this tank for any purpose other than fresh or gray water storage will void any/all warranty. Do Not use tanks for sewage or fuel.
See On Amazon #7
Class A Customs | Four (4) Pack of White Locking Fold Down Camper Latch and Catch
Asin: B08RZCV8SG | Ean: 0753569688225 | UPC: 753569688225
Mounting Plate Measures 2" X 1 7/8" - Catch Measures 1 1/4" X 7/8".
Mounting Hardware Is *Not* Included.
Locking Style Allows For Use With A Padlock (Padlock *Not* Included).
Constructed Of Steel, Powder Coated White For Corrosion Resistance.
Features
- Locking camper latches insure your pop up camper or snowmobile trailer is secure
- Constructed of steel, powder coated white for corrosion resistance
- Mounting plate measures 2 x 1 7/8 - Catch measures 1 1/4 x 7/8
- Locking style allows for use with a padlock (padlock *NOT* included)
- Mounting hardware is *NOT* included
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #8
Class A Customs 14" RV Roof Vent 12 Volt Powered Fan w/White Wedge Style Lid - 3" Garnish Ring | 71112A-3G
Asin: B081HG43NV | Ean: 7426933331821
Rough Cut-Out Opening Dimensions (This Is The Hole You Will Need In Your Roof) 14 1/2” X 14 1/2.
3" Inner Garnish / Trim Ring Heng's Part #90092 - 3" Vertical Leg (How Far Up Into Your Ceiling It Goes) 1 ¼” Wide Mounting Flange (Trim You See Inside On The Roof).
Exterior Mounting Flange Dimensions (Sits On The Top Of Your Unit) 16 1/2” X 16 1/2” - No Mounting Hardware You Must Provide Caulk/Putty And Screws ****Warning All Vent Metal Flanges Are Very Sharp Use Caution When Touching Warning ****.
12 Volt Powered Fan Push Button On/Off - Manual Crank Handle To Open Lid - Mesh Screen.
Features
- Standard Universal RV Roof Vent (12 volt POWERED FAN) w/ White Wedge Style Lid Heng's Industries Part # 71112A
- 12 VOLT Powered Fan Push Button On/Off - MANUAL CRANK HANDLE to open lid - MESH SCREEN
- ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2 X 14 1/2
- EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 1/2 X 16 1/2 - NO MOUNTING HARDWARE you must provide caulk/putty and screws ****WARNING All Vent Metal Flanges are VERY SHARP use caution when touching WARNING ****
- 3 Inner Garnish / Trim Ring Heng's Part #90092 - 3 Vertical Leg (How far up into your ceiling it goes) 1 Wide Mounting Flange (trim you see inside on the roof)
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Hengs
Weight: 10.00 pounds
See On Amazon #9
classAcustoms 008-00004 | RV Water Fill diverter Valve | for Diverting Fresh Water Between Tank and City Water Supply
Asin: B0CK8L6MMF | Model: 008-00004 | PartNumber: 008-00004
Assembly Is Required.
Made In The U.S.A..
Mounting Screws Are Not Included.
1/2" Pex Connections.
Rv Water Fill Diverter Valve And Plate.
Features
- Changes water source between the city water fill and the fresh water holding tank
- RV Water Fill Diverter Valve and Plate
- Assembly is required
- 1/2 Pex Connections
- Made in the U.S.A.
- Mounting screws are NOT Included
- See more on Amazon...
Brand: classAcustoms | Manufacturer: BB
Weight: 0.34 pounds
Warranty: 1 year against manufactures defects / Does not cover Freezing
See On Amazon #10
Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank
Asin: B07XTNGY88 | Ean: 7426933331340
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 50.5” Longest Length (Not Including Fittings) X 17.5” X 19.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 50.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #11
Class A Customs | One (1) RV Fresh and Gray Water use 33 Gallon Tank | T-3300
Asin: B08FJ7ZGPY | Model: T-3000-1 | PartNumber: T-3000-1 | Ean: 0782731951393 | UPC: 782731951393
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 36” Longest Length (Not Including Fittings) X 12” X 17.75” Average Thickness 7/32” +/- (+/- .25" On Each Measurement).
Features
- 33 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 36 Longest Length (not including fittings) x 12 x 17.75 Average thickness 7/32 +/- (+/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 36.00 x 17.50 inches | Weight: 18.00 pounds
See On Amazon #12
classAcustoms 35ft TPO RV Rubber Roof Kit | 8.5' Wide | Camper Rubber Roof Kit
Asin: B07BKMC12Y | Model: RRK85-35 | PartNumber: RRK85-35 | Ean: 0671065514537 | UPC: 671065514537
4 Rolls Of Putty Tape (1/8" (Thick) X 3/4" W X 30' L).
**Item Ships Folded In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Classacustoms Rubber Roof Adhesive (Water Based).
5 Tubes Of Heng's Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 35 Feet of classAcustoms TPO by 8 1/2 feet wide Rubber Roofing Material
- 5 tubes of Heng's Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- 4 Rolls of Putty Tape (1/8 (thick) x 3/4 W x 30' L)
- 2 Gallons of classAcustoms Rubber Roof Adhesive (Water Based)
- **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #13
Class A Customs 14" Non-Powered RV Roof Vent with White Wedge Style Lid - 5" Garnish Ring - Putty & Screws - Plastic Crank Handle | 71111A-5G-PS
Asin: B08J8FMQ4M | Ean: 0782731952611 | UPC: 782731952611
Manual Crank Handle To Open Lid - Mesh Screen.
Exterior Mounting Flange Dimensions (Sits On The Top Of Your Unit) 16 1/2” X 16 1/2” - Mounting Hardware Included 70" Putty Tape - 28 Pan Head Screws #8 X 1"S ****Warning All Vent Metal Flanges Are Very Sharp Use Caution When Touching.
5" Inner Garnish / Trim Ring Heng's Part #90092 - 5" Vertical Leg (How Far Up Into Your Ceiling It Goes) 1 ¼” Wide Mounting Flange (Trim You See Inside On The Roof).
Rough Cut-Out Opening Dimensions (This Is The Hole You Will Need In Your Roof) 14 1/2” X 14 1/2.
Features
- Standard Universal RV Roof Vent (NON POWERED) w/ White Wedge Style Lid Heng's Industries Part # 71111A
- ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2 X 14 1/2
- MANUAL CRANK HANDLE to open lid - MESH SCREEN
- 5 Inner Garnish / Trim Ring Heng's Part #90092 - 5 Vertical Leg (How far up into your ceiling it goes) 1 Wide Mounting Flange (trim you see inside on the roof)
- EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 1/2 X 16 1/2 - MOUNTING HARDWARE INCLUDED 70 Putty tape - 28 Pan Head Screws #8 x 1s ****WARNING All Vent Metal Flanges are VERY SHARP use caution when touching
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Heng's Industries
See On Amazon #14
Class A Customs 9.5 ft TPO RV Rubber Roof Kit | 30 ft Long Complete Roof Kit | Motor Home Roof | Camper Roof | Trailer Rubber Membrane and Glue Roofing Kit
Asin: B01MTO1ZU1 | Model: 1725-ISK-WH | PartNumber: 1725-ISK-WH | Ean: 0808890309728 | UPC: 808890309728
4 Rolls Of Putty Tape (1/8" (Thick) X 3/4" W X 30' L).
**Item Ships Folded In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Classacustoms Water Based Acrylic Rubber Roof Adhesive.
5 Tubes Of Heng's Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 30 Feet of classAcustoms TPO Membrane by 9 1/2 feet
- 5 tubes of Heng's Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- 4 Rolls of Putty Tape (1/8 (thick) x 3/4 W x 30' L)
- 2 Gallons of classAcustoms Water Based Acrylic Rubber Roof Adhesive
- **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #15
Class A Customs | 2 Pack | Heng's 27.5" RECESSED RV Chrome Straight Table Leg Kit (2 Legs - 2 Surface Bases - 2 Recessed Bases)
Asin: B08D9SD154 | Ean: 0782731950754 | UPC: 782731950754
2 Surface Bases - No Hole In Floor Needed.
Bases Are Not Chrome Finish.
2 Recessed Bases - Hole Needed In Floor.
Ends Of The Leg Are "Fluted" Or Crimped To Ensure A Tight Fit.
Features
- Table Leg 27.5 x 2" diameter
- Ends of the leg are fluted or crimped to ensure a tight fit
- 2 Surface Bases - no hole in floor needed
- 2 Recessed Bases - hole needed in floor
- Bases are not chrome finish
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 27.50 x 2.00 x 0.01 inches
See On Amazon #16
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Side Air Vents | Two Pack | Black | High Tech/Arrow Design
Asin: B088MDJVXW | Ean: 7426933332965
Measurements Arrow Piece 8.5” Widest Point X 7.8125” Tallest Point Measurements Inner Circle Piece 3” Diameter Insert X 4.125” Face Plate.
Design Allows For Air To Be Scooped Inside The Trailer And Easily Circulate While Not Allowing Water In. For Maximum Air Flow Additional Vents Can Be Used To Dramatically Increase The Amount Of Airflow..
Material: Plastic Color: Black Quantity: 2 Vents Total.
Features
- New High-Tech Arrow Shaped Plastic Side Wall Air Vents for cargo trailer ventilation
- MATERIAL: Plastic COLOR: Black QUANTITY: 2 Vents Total
- MEASUREMENTS ARROW PIECE 8.5 Widest point x 7.8125 Tallest point MEASUREMENTS INNER CIRCLE PIECE 3 diameter insert x 4.125 face plate
- Design allows for air to be scooped inside the trailer and easily circulate while not allowing water in. For maximum air flow additional vents can be used to dramatically increase the amount of airflow.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #17
classAcustoms VL-W-1G | 14" RV Roof Vent | White Lid | Non-Powered | w/ 1" Garnish Trim Ring
Asin: B09D4ZSZKF
Galvanized Mounting Flange (Caution It Is Sharp)).
Manual Crank.
Easily Removable Screen.
Mounting Hardware, Screws, Putty Is Not Included!.
Non Powered Vent. No Fan.
Features
- White Polypropylene Wedge Style Dome
- Non Powered Vent. No Fan
- Galvanized Mounting Flange (CAUTION IT IS SHARP))
- Mounting Hardware, Screws, Putty is NOT INCLUDED!
- Manual Crank
- Easily Removable Screen
- See more on Amazon...
Brand: classAcustoms
See On Amazon #18
Class A Customs Premium Heavy Duty RV Camper Trailer Exterior Skylight - 18 x 26 OD / 14 x 22 ID Smoke (Tinted)
Asin: B01M34HDFC | Model: 1826-ESK-SM | PartNumber: 1826-ESK-SM | Ean: 0808890309582 | UPC: 808890309582
Mounting Flange Dimensions 17 7/8" X 26" Pre-Drilled For Easy Mounting.
No Mounting Hardware - No Garnish Ring You Must Provide Caulk/Putty And Screws.
Dome Dimensions (This Is Roughly The Size Hole You Will Need In Your Unit) 14 1/8" X 22 1/8" (4 1/4" Height).
Color Smoke Tinted.
Features
- Premium design made from 50% stronger material than ordinary RV skylights
- COLOR Smoke Tinted
- MOUNTING FLANGE DIMENSIONS 17 7/8 X 26 Pre-drilled For Easy Mounting
- DOME DIMENSIONS (this is roughly the size hole you will need in your unit) 14 1/8 X 22 1/8 (4 1/4 height)
- NO MOUNTING HARDWARE - NO GARNISH RING you must provide caulk/putty and screws
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #19
Class A Customs | T-5000 | 50 Gallon Fresh Water Holding Tank RV and Concession
Asin: B0B2KPDCZW | Model: T-5000 | PartNumber: T-5000
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 38.25” Longest Length (Not Including Fittings) X 14.25” X 22.25”- Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 50 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 38.25 Longest Length (not including fittings) x 14.25 x 22.25 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 22.00 x 38.00 x 14.00 inches
Warranty: 1 year from date of purchase against any manufacturing defects. Warranty will be replacement only!
See On Amazon #20
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
Asin: B07XTNP3S2 | Ean: 7426933331333
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 44.5” Longest Length (Not Including Fittings) X 17.5” X 19.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 44.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 17.50 x 44.50 x 19.50 inches
See On Amazon #21
Class A Customs | Pair of Telescoping Trailer Swing Down Stabilizer Jacks (1000lb Capacity Each) 11.5"-18" | Includes 9" Long Bar/Crank
Asin: B089B5MF1P | Ean: 7426933333092
**Includes A 9" Long, 0.5" Round Bar/Crank**.
Retracted Length 11.5" Fully Extended Length 18" Base Plate 3.375” W X 4" L. Mounting Area 2” W X 4".
Can Be *Bolted* Or *Welded* To Frame - Do Not Use Screws As The Screws Will Work Their Way Loose Or Be Pulled Out. Use Bolts If You Are Not Wanting To Weld The Jacks On..
2 Jacks Included.
Features
- 1000 lb Capacity per jack
- 2 Jacks Included
- **Includes a 9 long, 0.5 round bar/crank**
- Can be *bolted* or *welded* to frame - DO NOT use screws as the screws will work their way loose or be pulled out. Use BOLTS if you are not wanting to weld the jacks on.
- Retracted Length 11.5 Fully Extended Length 18 Base Plate 3.375 W x 4 L. Mounting Area 2 W x 4
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Weight: 4.00 Pounds
See On Amazon #22
Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (16 Gallon & 21 Gallon) | RV Water Holding Tanks
Asin: B0859MC1FJ | Ean: 7426933332095
These 16 And 21 Gallon Tanks Each Have Two 1/2" Female Npt Fittings (Fitting Will Be Closed, To Use Remove Inner Membrane With Razor Knife) And Two 1 1/2" Female Npt Fittings (Fitting Is Not Closed, This Fitting Is Completely Open).
21 Gallon Tank Measurements - 34" X 9" X 16" (+/- .25").
16 Gallon Tank Measurements - 25.25" X 17.25" X 10.5" (+/- .25").
Nsf Certified Materials Used For Manufacturing Process -- All Parts Of Tank Made With Nsf International Nsf/Ansi Std 61 Approved Medium Density Polyethylene (Mdpe) Resin With Uv-8 Stabilization -- The Tank And Fittings Are Both Made Out Of This Material..
Features
- Combo Pack of RV Fresh & Gray Water Tanks, 16 Gallon & 21 Gallon
- NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material.
- These 16 and 21 gallon tanks each have two 1/2 female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2 female NPT fittings (fitting is not closed, this fitting is completely open)
- 16 Gallon Tank measurements - 25.25 x 17.25 x 10.5 (+/- .25)
- 21 Gallon Tank measurements - 34 x 9 x 16 (+/- .25)
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #23
Class A Customs | One (1) RV Fresh and Gray Water use 35 Gallon Tank | T-3500 | 38.75" X 12" X 17.375" | Camper and Concession Trailer/Food Truck
Asin: B0BZDQ5TLF | Model: T-3500 | PartNumber: T-3500
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Perfect For Concession And Food Vendor Trucks And Trailers.
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 38.75” Longest Length (Not Including Fittings) X 12” X 17.375” Average Thickness 7/32” +/- (+/- .25" On Each Measurement).
Features
- 35 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 38.75 Longest Length (not including fittings) x 12 x 17.375 Average thickness 7/32 +/- (+/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- Perfect for Concession and food vendor trucks and trailers
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 38.75 x 17.38 inches | Weight: 19.00 pounds
See On Amazon #24
Class A Customs | T-4600 | One (1) RV Fresh Water 46 Gallon Tank, Grey Water
Asin: B007MSLP7A | Model: T-4600 | PartNumber: T-4600
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 42” Longest Length (Not Including Fittings) X 14” X 18” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 46 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 42 Longest Length (not including fittings) x 14 x 18 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 14.00 x 42.00 x 18.00 Inches | Weight: 49.00 pounds
See On Amazon #25
classAcustoms WT-1653 3" Black Water RV Waste Holding Tank 16 Gallon Concession and Camper Waste Black Gray Tank
Asin: B0C8QXSKGB | Model: WT-1653 | PartNumber: WT-1653
Inlet & Vent Installation Class A Customs Black Water Tanks Only Come With The Outlet The End User Will Determine Where The Inlet And Vent Will Need To Be Placed And Install, Hardware Not Included. Tank Must Be Vented Allowing Air In And Out When In Use. *Do Not Pressurize Tank* Do Not Over-Tighten Fittings Damage Will Occur..
Please See The Photos Showing The Detailed Dimension Of This Tank.
Not Included Inlet And Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping Not Included.
Installed Outlet 3” Abs Female Pipe - Outlet Can Not Be Moved Do Not Over-Tighten Fittings Damage Will Occur Dump Valves Do Not Hook Directly To The 1.5" Abs Fitting, From The Outlet Run Pvc Or Abs Piping (Not Included), Dump Valve (Not Included) Is Added To The Piping..
Features
- 16 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE WASTE/GRAY WATER USE ONLY Used in RV s Campers, Trailers, Motorhomes and Tiny Houses
- INSTALLED OUTLET 3 ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 1.5 ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping.
- INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur.
- NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED
- Please see the Photos showing the detailed dimension of this tank
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 8.50 x 45.00 x 12.00 Inches | Weight: 11.00 Pounds
Warranty: 1 year for any manufactures defect.
See On Amazon #26
4-24in. 5000 lb RV Scissor Leveling Jacks with Handle Trailer Heavy Duty
Asin: B01I5JS658 | Ean: 0808890309490 | UPC: 808890309490
5,000 Lbs Lift Capacity Each Jack..
Limited One Year Warranty..
Heavy Duty Weather And Rust-Resistant Coated Heavy Duty Metal..
Lift Range: 13.75In. To 23.5In..
Features
- Four premium jacks with one handle.
- Lift Range: 13.75in. to 23.5in.
- 5,000 lbs Lift Capacity each jack.
- Heavy duty weather and rust-resistant coated heavy duty metal.
- Limited One Year Warranty.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Weight: 20.00 pounds
See On Amazon #27
Class A Customs | UM-2000 | One (1) UnderMount 20 Gallon RV Fresh and Gray Water Holding Tank RV Concession
Asin: B07LBB4RTF | Model: UM-2000 | PartNumber: UM-2000 | Ean: 7426933333771
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 48” Longest Length (Not Including Fittings) X 8.5” Height X 13” Width - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 48 Longest Length (not including fittings) x 8.5 height x 13 width - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: Class A Customs | Manufacturer: classAcustoms.com
Dimensions: 11.75 x 32.50 x 11.75 inches | Weight: 30.00 pounds
See On Amazon #28
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Half-Moon Side Air Vents | Two Pack | White
Asin: B08877PMDY | Ean: 7426933332941
Allows Air Circulation In The Trailer.
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #29
Class A Customs | Four (4) Pack of Black Locking Fold Down Camper Latch and Catch
Asin: B08RZCHR89 | Ean: 0753569766312 | UPC: 753569766312
Mounting Plate Measures 2" X 1 7/8" - Catch Measures 1 1/4" X 7/8".
Mounting Hardware Is *Not* Included.
Locking Style Allows For Use With A Padlock (Padlock *Not* Included).
Constructed Of Steel, Powder Coated Black For Corrosion Resistance.
Features
- Locking camper latches insure your pop up camper or snowmobile trailer is secure
- Constructed of steel, powder coated black for corrosion resistance
- Mounting plate measures 2 x 1 7/8 - Catch measures 1 1/4 x 7/8
- Locking style allows for use with a padlock (padlock *NOT* included)
- Mounting hardware is *NOT* included
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #30
Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water
Asin: B07659973Z | Model: T-2000 | PartNumber: T-2000 | Ean: 0671065514278 | UPC: 671065514278
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 32.5” Longest Length (Not Including Fittings) X 11.75” X 11.75” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 32.5 Longest Length (not including fittings) x 11.75 x 11.75 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 11.75 x 32.50 x 11.75 Inches | Weight: 30.00 pounds
See On Amazon