elechawk - Buying Guide
Last Updated: 05/01/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013
Asin: B07NWD5NTN | Ean: 0053554158321 | UPC: 053554158321
★Must Have For Hv Batteries And High Performance.
★Suitable For Tiny Whoop Like Jrc H36 H67 Upgrading Blade Inductrix, E010 E013, And Kingkong Tiny Drone.
★80Mm Length/Per Unit. 22Awg Soft Silicone Wire.
★Upgrade Jst-Ph 2.0 Connector, The Pins Will Not Loose Easily.
Features
- This is the male and female connector cable,
- Upgrade JST-PH 2.0 connector, the pins will not loose easily
- Must have for HV batteries and high performance
- 80mm length/per unit. 22AWG soft silicone wire
- Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.20 x 3.15 x 0.20 inches
See On Amazon #2
RC Remote Controlled AUX on/Off Electronic Switch Relay for Car Truck Boat LED Light Drone (4A)
Asin: B08FLZXSD7 | Model: RCSW84 | PartNumber: RCSW84 | Ean: 0053554158413 | UPC: 053554158413
Super Simple Install, Just Plugs With The Item You Would Like To Control, No Setup Required. Just Make Sure In Your Radio The Throw For The Channel You Would Like To Control Is Set To +/- 100%.
Input Voltage (Dc):3.7-15V. Load Current (Dc):4A (Continuous Current).
Suitable For Rc Cars, Trucks, Planes, Helicopter, Quadcopter And Drones.
Easily Turn On Or Off Lights, Smoke System, Bomb Drops, Plane Canopies From Your Remote Controller Or Transmitter.
Features
- Package include a RC switch and a JST to futaba/JR adapter. This RC switch can be connected to receiver AUX channel or other desire channel. Toggle the related switch on the transmitter, this RC switch will close or open.
- Easily turn on or off lights, smoke system, bomb drops, plane canopies from your remote controller or transmitter
- Super simple install, just plugs with the item you would like to control, no setup required. Just make sure in your radio the throw for the channel you would like to control is set to +/- 100%
- Suitable for RC cars, trucks, planes, helicopter, quadcopter and drones
- Input Voltage (DC):3.7-15V. load current (DC):4A (Continuous current)
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 3.94 x 3.94 inches | Weight: 0.02 pounds
See On Amazon #3
5 Pcs JR/Futaba Style Servo 1 to 2 Y Harness Leads Splitter Cable Male to Female Extension Lead Wire for RC Models Airplane 7cm
Asin: B07PHDYZXN | Model: 890 | PartNumber: 890 | Ean: 0053554158369 | UPC: 053554158369
10Cm Lenght..
Work With Rc Cars, Planes, Helicopters, & Drones. It Can Be Used To Control 2 Servos At The Same Time..
Servo Plug Type: Futaba Compatible With Jr / Spektrum / Hitec.
Y Servo Leads Are Durable, Soft And Light.
Features
- Includes 5 pieces of cables.
- Y Servo Leads are durable, soft and light
- 10cm lenght.
- Servo Plug Type: Futaba compatible with JR / Spektrum / Hitec
- Work with RC Cars, Planes, Helicopters, & Drones. It can be used to control 2 servos at the same time.
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
See On Amazon #4
3 Pairs XT60 Plug Female and Male Connector with 12AWG Silicon Wire for RC Lipo Battery Cable Drone
Asin: B07QH249CR | Model: XT60FM55 | PartNumber: XT60FM55 | Ean: 0053554158970 | UPC: 053554158970
Used For Rc Car, Quadcopter And Boat Battery Connection.
Rates Up To 55A Continuous. Provides Solid And Reliable Connection.
Conductor Material: 12Awg Tin-Plated Copper.
Good Soldering Quality. Copper Contact. Low Resistance.
Features
- Include 3 PCS XT60 female cable and 3PCS XT60 male cable
- Good soldering quality. Copper contact. Low resistance
- Used for RC car, quadcopter and boat battery connection
- Conductor Material: 12AWG Tin-plated copper
- Rates up to 55A continuous. Provides solid and reliable connection
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 4.72 x 3.15 inches | Weight: 0.11 Pounds
See On Amazon #5
5 Pairs T Plug Connector Female and Male Deans with 14AWG Silicon Wire for RC Lipo Battery Cable Drone
Asin: B07WHPD4KD | Model: 14AWG10P | PartNumber: 14AWG10P | Ean: 0053554158574 | UPC: 053554158574
Used For Rc Car, Quadcopter And Boat Battery Connection.
Rates Up To 25A Continuous. Provides Solid And Reliable Connection.
Conductor Material: 14Awg Tin-Plated Copper.
Good Soldering Quality. Copper Contact. Low Resistance.
Features
- Include 5 PCS female dean plug cable and 5 PCS male dean plug cable
- Good soldering quality. Copper contact. Low resistance
- Used for RC car, quadcopter and boat battery connection
- Conductor Material: 14AWG Tin-plated copper
- Rates up to 25A continuous. Provides solid and reliable connection
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
See On Amazon #6
55 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit with Crimping Tool Compatible JST SYP Futaba for Hitec Spektrum RC
Asin: B0BGX7157Y | Model: CWK-SYF254-FM02 | PartNumber: CWK-SYF254-FM02 | Ean: 0033985744492 | UPC: 033985744492
The Black Connector Compatible With Futaba And Jr Connectors. Ideal For Servo Extensions Diy, Repairing Servo Connectors. The Red Connector Compatible With Jst Syp Connectors. Ideal For Power Cable..
Each Set Includes Connector Housing, Protective Connector Housing And Crimp Pin Connector. The Servo Connector Is 2.54Mm Pin Spacing And The Red Connector Is 2.5Mm Pin Spacing.
The Cable Is 3 Meters Long 3P Wires, And 22Awg. The Conduct Is Made Of Multi-Core Tined Copper, Which Is Strong And Can Endure Enough Current.
This Terminal Crimping Tool Has A Ratcheting Mechanism Design Which Can Also Help You To Save Energy And Strength. Comfortable To Use And Easy To Operate. Crimping Range:0.25-1.5Mm/23-16Awg, For 2.54Mm 3.96Mm Kf2510/Jst Type Connectors..
Features
- Includes 30 sets servo male, 30 sets female connector, 25 sets red male SYP 25 sets female SYP connector, 3 meters long 22AWG cables, 10 pcs servo connector clips, a tweezers and a Crimping Tool Kit in one box.
- This terminal crimping tool has a ratcheting mechanism design which can also help you to save energy and strength. Comfortable to use and easy to operate. Crimping Range:0.25-1.5mm/23-16AWG, For 2.54mm 3.96mm KF2510/JST type connectors.
- The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable.
- The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current
- Each set includes connector housing, protective connector housing and crimp pin connector. The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 4.40 x 10.30 x 2.00 inches
See On Amazon #7
4 PCS Male Deans T Plug Connector Adapter Compatible with TRX Wireless Converter for RC Battery Charger Slash
Asin: B07QGZ6PXV | Model: TR2T4 | PartNumber: TR2T4 | Ean: 0053554158932, 0747302207897 | UPC: 053554158932, 747302207897
Good Soldering Quality. Copper Contact. Low Resistance.
Used For Converting Battery With Deans To Connector Compatible With Trx On Esc Or Charger.
Connection Is Very Solid And Secure.
Features
- Package including 4pcs of male deans adapter compatible with female TRX connector
- Connection is very solid and secure
- Good soldering quality. Copper contact. Low resistance
- Used for converting battery with deans to connector compatible with TRX on ESC or charger
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
See On Amazon #8
40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spektrum RC
Asin: B09MYWTHDZ | Model: CWK-SYF254-FM01 | PartNumber: CWK-SYF254-FM01 | Ean: 0033985744119 | UPC: 033985744119
The Cable Is 3 Meters Long 3P Wires, And 22Awg. The Conduct Is Made Of Multi-Core Tined Copper, Which Is Strong And Can Endure Enough Current.
The Servo Connector Is 2.54Mm Pin Spacing And The Red Connector Is 2.5Mm Pin Spacing.
Each Set Includes Connector Housing, Protective Connector Housing And Crimp Pin Connector..
The Black Connector Compatible With Futaba And Jr Connectors. Ideal For Servo Extensions Diy, Repairing Servo Connectors. The Red Connector Compatible With Jst Syp Connectors. Ideal For Power Cable..
Features
- Includes 20 sets servo male, 20 sets female connector, 20 sets red male SYP 20, sets female SYP connector, 3 meters long 22AWG cables, and a tweezers in one box. Easy to store
- The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable.
- The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current
- Each set includes connector housing, protective connector housing and crimp pin connector.
- The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.79 x 7.09 x 3.94 Inches | Weight: 0.35 pounds
See On Amazon #9
RC LED Light Strips Kit for RC Car Crawler Truck Airplane Boat Drone Fixed Wing Traxxas TRX4 Axial SCX10 Color Changeable
Asin: B0BP1PM1S9 | Model: EL-LED-SKIT1 | PartNumber: EL-LED-SKIT1 | Ean: 0033985743655 | UPC: 033985743655
The Led Strips Are Super Bright. Covered Thickened Transparent Heat Shrinkable Tube Makes The Light Strips Waterproof And Durable,.
Input Voltage Range: 6V-15V. Maximum Power Consumption: 6.6W. Length Of Light Strip: 0.33M (13Nch) * 2.
Compatible With Nearly All Brand Rc Car Truck Crawler Like Traxxas, Tamiya, Axial. Hsp, Or Redcat, Etc..
The Light Color And Lighting Mode Are Changeable. Total 21 Working Modes. You Can Remote Control The Light Via Your Transmitter Or The Button On The Light Controller..
Features
- This Light strips and controller kit is suitable for RC car, truck, RC airplane, RC boat, drone, fixed-wing and other RC vehicles.
- The light color and lighting mode are changeable. Total 21 working modes. You can remote control the light via your transmitter or the button on the Light controller.
- The LED strips are super bright. Covered thickened transparent heat shrinkable tube makes the light strips waterproof and durable,
- Compatible with nearly all brand RC car truck crawler like Traxxas, Tamiya, Axial. HSP, or Redcat, etc.
- Input voltage range: 6V-15V. Maximum power consumption: 6.6W. Length of light strip: 0.33m (13nch) * 2
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 2.00 x 13.00 x 2.00 inches | Weight: 0.07 pounds
Warranty: 2 year.
See On Amazon #10
GH1.25 Connectors and Pre-Crimped Silicone Cables Compatible with JST GH 1.25mm for Pixhawk 6C 6X Pixhawk 4 15cm Wires
Asin: B07PBHN7TM | Model: 45-23 | PartNumber: 45-23 | Ean: 0053554159311 | UPC: 053554159311
Ultra Soft Silicone Wire, Still Has Very Good Flexibility At Low Temperature..
You Can Achieve Connection Between Flight Controller And Gps, Telemetry Module, Power Module, Bluetooth Module, Osd, Airspeed Meter, Optical Flow Sensor Or Ultrasonic Sensor Etc.
Suitable For The New Version Of Pixhawk 6C 6X, Pixhawk2 The Cube, Pixhawk 4, Pixhawk4 Mini, Cuav V5, Pixhack, Emlid Edge, Pixracer, Mini Pix, And Dji Inspire Phantom Flight Controller..
You Can Make An Arbitrary Cable By Just Plugging The Terminal Of The Cable Into The Connector Manually.
Features
- 15cm Pre-crimped GH1.25 to GH1.25 Cables * 180pcs ( 6 colors, each color 30 cables) 2P*20pcs, 3P*20pcs, 4P*20pcs, 5P*20pcs, 6P*20pcs, 7P*10pcs, 8P*10pcs, 9P*10pcs, 10P*10pcs, Diameter 1 mm Heat shrinkable tube * 100pcs and Tweezer * 1pcs
- You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
- Ultra soft silicone wire, still has very good flexibility at low temperature.
- Suitable for the new version of Pixhawk 6C 6X, Pixhawk2 the cube, Pixhawk 4, Pixhawk4 mini, CUAV v5, Pixhack, Emlid edge, Pixracer, mini pix, and DJI inspire phantom flight controller.
- You can achieve connection between flight controller and GPS, Telemetry module, Power module, Bluetooth module, OSD, airspeed meter, optical flow sensor or ultrasonic sensor etc
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Weight: 0.27 pounds
See On Amazon #11
elechawk 5 Pairs XT60 Plug Connector Female and Male with 14AWG Silicon Wire for RC Lipo Battery Cable Drone Car Boat
Asin: B085HF31K7 | Model: WI-XT60-01 | PartNumber: WI-XT60-01 | Ean: 0053554158895 | UPC: 053554158895
Used For Rc Car, Quadcopter And Boat Battery Connection.
Rates Up To 25A Continuous. Provides Solid And Reliable Connection.
Conductor Material: 14Awg Tin-Plated Copper.
Good Soldering Quality. Copper Contact. Low Resistance.
Features
- Include 5 PCS female XT60 plug cable and 5 PCS male XT60 plug cable
- Good soldering quality. Copper contact. Low resistance
- Used for RC car, quadcopter and boat battery connection
- Conductor Material: 14AWG Tin-plated copper
- Rates up to 25A continuous. Provides solid and reliable connection
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.63 x 4.72 x 3.15 inches | Weight: 0.13 pounds
See On Amazon #12
12pcs Plastic Protection Antenna Tube with Caps for RC Cars FPV Drone Receiver Antenna Frsky XM+ X4R X4RSB
Asin: B085NDPMGZ | Model: an12p | PartNumber: an12p | Ean: 0053554158772 | UPC: 053554158772
Suitable For Quadcopter, Fpv Racing Drone Receiver Antenna.
The Tube With 2Mm Inner Diameter And 150Mm Length Is Suitable For All Receiver Antenna.
Effectively Protects The Antenna From Damage When Crashing.
The Colorful Plastic Tube Is Durable And Light-Weight.
Features
- Include 12PCS plastic colorful tube, 12PCS black caps and 12PCS red caps
- The colorful plastic tube is durable and light-weight
- Suitable for Quadcopter, FPV Racing Drone receiver antenna
- Effectively protects the antenna from damage when crashing
- The tube with 2mm inner diameter and 150mm length is suitable for all receiver antenna
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 7.87 x 2.36 inches
See On Amazon #13
30 Sets Servo Connector Male Female Plug Crimp Pin Cable Kit Compatible with Futaba JR Hitec Spektrum RC Connectors (with Crimping Tool)
Asin: B0CL9T6SHW | Ean: 0747302207873 | UPC: 747302207873
The Servo Connector Is 2.54Mm Pin Spacing. The Anti-Loosening Design Makes The Connection More Reliable.
Each Set Includes Connector Housing, Protective Connector Housing And Crimp Pin Connector..
The Cable Is 3 Meters Long 3P Wires, And 22Awg. The Conduct Is Made Of Multi-Core Tinned Copper, Which Is Strong And Can Endure Enough Current.
The Servo Connector Is Compatible With Futaba And Jr Connectors. Ideal For Servo Extensions Diy, Repairing Servo Connectors, And Power Cables..
Features
- Includes 30 sets servo male and pin, 30 sets female connector and pin, 3 meters (118 inches) long 22AWG cables, a crimping tool, and a tweezers in one box. Easy to store
- The servo connector is compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors, and power cables.
- The servo connector is 2.54mm pin spacing. the anti-loosening design makes the connection more reliable
- The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tinned copper, which is strong and can endure enough current
- Each set includes connector housing, protective connector housing and crimp pin connector.
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 2.00 x 10.20 x 4.30 inches
See On Amazon #14
36 PCS RC Transmitter Switch Covers Colorful Rubber Anti-Slipping Cap for Jumper T16 T18 FrSky X9D QX7 Flysky Spektrum DX8e
Asin: B08FR3576S | Model: COVER36 | PartNumber: COVER36 | Ean: 0053554158338 | UPC: 053554158338
Colorful Rubber Covers Make It Easy For You To Recognize The Function Of Each Switch.
2 Size Covers Make It Suitable For Most Brand Transmitters. If The Rubber Cap Longer Than Your Switch, You Can Trim It To A Proper Length By Scissors.
The Cover Can Be Put On The Switch Of Transmitter To Prevent Slipping And Reduce Pressure On Finger When Toggle The Switch.
Suitable For Most Brand Transmitters Like Jumper T16 T18, Frsky Taranis X9d Plus Qx7 X-Lite X12s, Flysky Fs-I6x Spektrum Dx6e, Futaba And Radiomaster Tx16s.
Features
- Included 32 PCS rubber covers (8 black, 8 red, 4 white, 4 blue, 4 green and 4 transparent)
- Suitable for most brand transmitters like Jumper T16 T18, FrSky Taranis X9D Plus QX7 X-Lite X12S, Flysky FS-i6x Spektrum DX6e, Futaba and Radiomaster TX16S
- Colorful rubber covers make it easy for you to recognize the function of each switch
- The cover can be put on the switch of transmitter to prevent slipping and reduce pressure on finger when toggle the switch
- 2 size covers make it suitable for most brand transmitters. If the rubber cap longer than your switch, you can trim it to a proper length by scissors
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 4.72 x 2.76 Inches | Weight: 0.03 pounds
See On Amazon #15
elechawk LED Light Strip for RC Fixed Wing Airplane Flying Wing Plane AR Wing Drone Model Car Truck (Green)
Asin: B082DFSRBK | Model: wing-led-RGB | PartNumber: wing-led-RGB | Ean: 0053554158949 | UPC: 053554158949
The Led Strip Is Super Brightness And Light. 0.5M Length Led Strip Is Almost Suitable For All Size Of Fixed Wing..
Rating Voltage: 4-6V.
As Underbody Light Suitable For Drift Car, Model Truck And Crawler Car.
Suitable For Fixed-Wing Like Ar Wing, Skyhunter, Zohd Talon Etc...
Features
- Package Include 2 LED strips, Y-cable
- Suitable for fixed-wing like AR Wing, Skyhunter, ZOHD Talon etc..
- The LED strip is super brightness and light. 0.5m length LED strip is almost suitable for all size of fixed wing.
- As underbody light suitable for Drift Car, Model Truck and Crawler Car
- Rating voltage: 4-6V
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.47 x 5.91 x 3.94 inches | Weight: 0.03 Pounds
See On Amazon #16
elechawk 4PCS RC Transmitter Stick Protector Protective Cover for Frsky X9D X7 Jumper T16 Flysky TH9X Spektrum
Asin: B083LBB735 | Ean: 0704888327579 | UPC: 704888327579
The Size Of The Center Hole Is Proper To Hold The Stick Without Loosening.
It Is Suitable For Nearly All Brand Radio Transmitter Like Frsky X9d X7, Flysky Fsi6 Fsi6x, Jumpter T16, Spektrum, Futaba, Jr.
This Protector Can Be Used To Protect The Stick Of Your Rc Transmitter During Transport..
Features
- Package included: Stick protector * 4
- This protector can be used to protect the stick of your RC transmitter during transport.
- The size of the center hole is proper to hold the stick without loosening
- It is suitable for nearly all brand radio transmitter like frsky X9D X7, flysky FSi6 FSi6X, Jumpter T16, Spektrum, Futaba, JR
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 1.38 x 3.94 x 5.91 inches | Weight: 0.05 Pounds
See On Amazon #17
4 PCS Male and Female Deans T Plug to Connector Adapter Compatible with TRX Wireless Converter for RC Battery Charger Slash
Asin: B0CJJ4L5HD | Model: TR2TMF | PartNumber: TR2TMF | Ean: 0747302207897 | UPC: 747302207897
Good Soldering Quality. Copper Contact. Low Resistance.
Used For Converting Battery With Deans To Connector Compatible With Trx On Esc Or Charger.
The Connection Is Very Solid And Secure.
Features
- Package including 2pcs of female deans adapter, 2pcs of male deans adapter, compatible with TRX connector
- The connection is very solid and secure
- Good soldering quality. Copper contact. Low resistance
- Used for converting battery with deans to connector compatible with TRX on ESC or charger
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.47 x 4.70 x 3.10 inches
See On Amazon #18
elechawk JST-XH 3S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone
Asin: B07PX37XX5 | Model: 3S5PK | PartNumber: 3S5PK | Ean: 0053554158888 | UPC: 053554158888
Separate Insulation Effectively Prevents Short-Circuit Between Pins.
Usefull For Diy Special 3S Lithium Battery Or Lipo Battery.
Jst-Xh Connector - The Most Common Style Lipo Balance Plug.
200Mm Length, 22Awg Soft Silicone Wire Can Endure Enough Current.
Features
- Included 5 PCS of 3S Extension Lead
- 200mm length, 22AWG soft silicone wire can endure enough current
- Separate insulation effectively prevents short-circuit between pins
- JST-XH connector - the most common style lipo balance plug
- Usefull for DIY special 3s lithium battery or lipo battery
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 5.12 x 3.54 Inches
See On Amazon #19
6PCS JST Plug Splitter JST Male Female Y Cable JST Y Parallel Adapter Harness JST to JR Adapter for Traxxas TRX-4 RC Car Crawler Truck Cooling Fan ESC Battery Motor
Asin: B08DY62Y7X | Model: 1JSTY | PartNumber: 1JSTY | Ean: 0053554159021 | UPC: 053554159021
The Male To Female Y Harness Can Be Used To Power 2 Cooling Fans, Plug The Jst Male Connector On Your Receiver, Then You Can Connect The 2 Cooling Fans On The Jst Female Connector, Also Can Run Other Parts Which Are In Jst Male Plug, Such As Lights, Winch..
Cable Length: 15Cm/5.9Inch For Splitter Cable, 10Cm/3.9Inch For Jst To Jr Cable.
The Female To Female Y Harness Are Used For Trx-4 Esc, It Allows To Be Powered By Trx-4 Esc And Run The Lights, Winch, Cooling Fan At The Same Time..
They Are Special For Traxxxas Car Truck Crawler And Hsp Redcat Rc4wd Tamiya Axial Scx10 D90 Hpi Rc Car, Mini Rc Helicopter And Indoor 3D Plane, Great For Small Lipo And Nimh Connection..
Features
- Package includes 6PCS Cable. 1PCS Male JST to Female JR (Futaba) Cable, 1PCS Female JST to Male JR Cable,1 Male to 2 Female Y Harness, 1 Male to 3 Female Y Harness, 1 Female to 2 Female Y Harness, 1 Female to 3 Female Y Harness.
- They are special for Traxxxas car truck crawler and HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car, mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection.
- The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch.
- The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time.
- Cable length: 15cm/5.9inch for splitter cable, 10cm/3.9inch for JST to JR cable
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 5.12 x 3.54 Inches
See On Amazon #20
JST-XH 2S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone
Asin: B07QLYCVK3 | Model: 2S5PK | PartNumber: 2S5PK | Ean: 0053554158710 | UPC: 053554158710
★ Separate Insulation Effectively Prevents Short-Circuit Between Pins.
★ Usefull For Diy Special 4S Lithium Battery Or Lipo Battery.
★ Jst-Xh Connector - The Most Common Style Lipo Balance Plug.
★ 200Mm Length, 22Awg Soft Silicone Wire Can Endure Enough Current.
Features
- Included 5 PCS of 2S Extension Lead
- 200mm length, 22AWG soft silicone wire can endure enough current
- Separate insulation effectively prevents short-circuit between pins
- JST-XH connector - the most common style lipo balance plug
- Usefull for DIY special 4s lithium battery or lipo battery
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
See On Amazon #21
Servo Y Harness Splitter Cable 3 Pin Connector Wire Male to Female 4 Way Extension Lead Compatible with JR Futaba RC Car Airplanes (3PCS 1to2 and 2PCS 1to3)
Asin: B09VNKNM8V | Model: SERCAB-01 | PartNumber: SERCAB-01 | Ean: 0033985743983 | UPC: 033985743983
Servo Connector Compatible With Futaba / Jr / Spektrum / Hitec.
1 To 2 Splitter Cable: 24Awg, Soft Wire, 7Cm (2.8Inch) Length; 1 To 3 Splitter Cable: 22Awg, Soft Wire, 15Cm (5.9Inch) Length.
Work With Rc Cars, Planes, Helicopters, & Drones Servo Or Receiver Connection. It Can Be Used To Control 2 Servos At The Same Time..
Made Of Tinned Copper, Pvc Material, Good Transmission, Low Resistance, Good Insulation. High Quality Soldering Points..
Features
- Includes 3 pieces of 1 to 2 splitter cables and 2 pieces of 1 to 3 splitter cables
- Made of tinned copper, PVC material, good transmission, low resistance, good insulation. High quality soldering points.
- Servo connector compatible with Futaba / JR / Spektrum / Hitec
- Work with RC Cars, Planes, Helicopters, & Drones servo or receiver connection. It can be used to control 2 servos at the same time.
- 1 to 2 splitter cable: 24AWG, soft wire, 7cm (2.8inch) length; 1 to 3 splitter cable: 22AWG, soft wire, 15cm (5.9inch) length
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.39 x 5.91 x 3.94 inches
See On Amazon #22
3 Pairs T Plug Connector Female and Male Deans with 12AWG Silicon Wire for RC Lipo Battery Cable Drone
Asin: B07QM1WS2J | Model: T55MM | PartNumber: T55MM | Ean: 0053554158680 | UPC: 053554158680
Used For Rc Car, Quadcopter And Boat Battery Connection.
Rates Up To 55A Continuous. Provides Solid And Reliable Connection.
Conductor Material: 12Awg Tin-Plated Copper.
Good Soldering Quality. Copper Contact. Low Resistance.
Features
- Include 3 PCS female T plug cable and 3PCS male T plug cable
- Good soldering quality. Copper contact. Low resistance
- Used for RC car, quadcopter and boat battery connection
- Conductor Material: 12AWG Tin-plated copper
- Rates up to 55A continuous. Provides solid and reliable connection
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Weight: 0.09 pounds
See On Amazon #23
elechawk 4 PCS Female T-Plug Deans to Male Adapter Compatible with TRX Connector for RC Battery ESC and Charger
Asin: B07XR7417Q | Model: FT2TRX | PartNumber: FT2TRX | Ean: 0053554158352 | UPC: 053554158352
Good Soldering Quality. Copper Contact. Low Resistance.
Used For Converting Battery Connector Compatible With Trx To Deans On Esc Or Charger.
Connection Is Very Solid And Secure.
Features
- Included 4pcs of female deans to connector compatible with male TRX adapter
- Connection is very solid and secure
- Good soldering quality. Copper contact. Low resistance
- Used for converting battery connector compatible with TRX to Deans on ESC or charger
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.47 x 4.72 x 3.15 inches
See On Amazon #24
elechawk JST-XH 4S Balance Plug Extension Lead Wire 200mm 5 PCS for LiPo Battery Balance Charging 22AWG Silicone
Asin: B07Q29TG24 | Model: WI-XH254-4S | PartNumber: WI-XH254-4S | Ean: 0053554158673 | UPC: 053554158673
Separate Insulation Effectively Prevents Short-Circuit Between Pins.
Usefull For Diy Special 4S Lithium Battery Or Lipo Battery.
Jst-Xh Connector - The Most Common Style Lipo Balance Plug.
200Mm Length, 22Awg Soft Silicone Wire Can Endure Enough Current.
Features
- Included 5 PCS of 4S Extension Lead
- 200mm length, 22AWG soft silicone wire can endure enough current
- Separate insulation effectively prevents short-circuit between pins
- JST-XH connector - the most common style lipo balance plug
- Usefull for DIY special 4s lithium battery or lipo battery
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 0.39 x 5.12 x 3.54 Inches | Weight: 0.05 Pounds
See On Amazon #25
RC LED Light Bar Roof Lamp Headlight Tail Light Kit Bumper Light Compatible with Traxxas RC Car Truck Crawler Tamiya Losi HPI Rustler Axial Police Lights (100mm 2 Bar)
Asin: B099DK62LS | Model: EL-LED-BA02 | PartNumber: EL-LED-BA02 | Ean: 0033985744041 | UPC: 033985744041
The Aluminum Alloy Frame And Transparent Acrylic Protective Cover Effectively Protect The Lights From Damage And Dirt..
Compatible With Nearly All Brand Rc Car Truck Crawlers Like Traxxas Tamiya. The Light Bar Can Be Mounted On The Body, Roof, Front Bumper, And Rear Bumper Using The Included Bracket And Zip Ties.
Input Voltage: 6V~15V, Max Power: 3.3W (When 2 Light Bars All Led White Color).
The 2 Light Bars Can Both Be Controlled Remotely Via Your Transmitter Or The Button On The Led Controller. 13 Switchable Light Modes And Colors Changeable. On/Off Control.
Features
- Color changeable high-intensity LED light kit can be used as headlight, tail light, roof light, front/rear bumper light and police lights.
- The 2 light bars can both be controlled remotely via your transmitter or the button on the LED controller. 13 switchable light modes and colors changeable. On/off control
- The aluminum alloy frame and transparent acrylic protective cover effectively protect the lights from damage and dirt.
- Input Voltage: 6V~15V, Max Power: 3.3W (when 2 light bars all LED white color)
- Compatible with nearly all brand RC car truck crawlers like Traxxas Tamiya. The light bar can be mounted on the body, roof, front bumper, and rear bumper using the included bracket and zip ties
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.59 x 7.87 x 5.51 inches
See On Amazon #26
SH1.0 Connectors and Pre-Crimped Silicone Cables Compatible with JST SH 1.0mm for FPV Drone Flight Controller F4 Pro F7 15cm Wire
Asin: B07PDQKHJ2 | Model: dad72 | PartNumber: dad72 | Ean: 0053554158703 | UPC: 053554158703
Ultra Soft Silicone Wire, Still Has Very Good Flexibility At Low Temperature..
You Can Achieve Connection Between Flight Controller And Camera, Vtx, Gps, Telemetry Module, Bluetooth Module, Osd, Or Ultrasonic Sensor Etc..
Suitable For Sparkfun Qwiic Adafruit Stemma Qt Connect System, Drone Like Spracingf3, Omnibus F4 Pro, F7 Etc. Flight Controller.
You Can Make An Arbitrary Cable By Just Plugging The Terminal Of The Cable Into The Connector Manually.
Features
- Included 15cm Pre-crimped SH1.0 to SH1.0 Cables * 240pcs ( 6 colors, each color 40 cables) 3P*20pcs 4P*20pcs 5P*20pcs 6P*20pcs 7P*20pcs 8P*10pcs 9P*10pcs 10P*10pcs 12P*10pcs Diameter 1 mm Heat shrinkable tube * 100pcs Tweezer * 1pcs
- You can make an arbitrary cable by just plugging the terminal of the cable into the connector manually
- Ultra soft silicone wire, still has very good flexibility at low temperature.
- Suitable for SparkFun Qwiic Adafruit STEMMA QT Connect System, Drone like SPRacingF3, OMNIBUS F4 Pro, F7 etc. flight controller
- You can achieve connection between flight controller and camera, VTX, GPS, Telemetry module, Bluetooth module, OSD, or ultrasonic sensor etc.
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
See On Amazon #27
elechawk 2 Sets Pan Tilt Servo Mount Bracket for MG996R S3003 Steering Gear Robot Car Boat
Asin: B07PQ12TXS | Model: 88065 | PartNumber: 88065 | Ean: 0704888327517 | UPC: 704888327517
This Set Bracket Can Be Assembled To A 2 Degree Of Freedom Gimbal. Pan And Tilt For A Horizontal Surface.
A Camera Or Sensor Can Be Mount On The Bracket For A Robot Or A Rover. The Servo Bracket Can Also Be Used In The Shoulders And Knees Or Another Joint Of Humanoid Robots, Biped Robots Etc..
Aluminium Matte Coat, Light And Strong. High Quality Ball Bearing, Rotating Smoothly.
Compatible With Tower Pro Mg996, Mg996r, Sg5010 Or Hs322, Hs422, Hitec, Parallax, Futaba S3003, Etc 40×20×36Mm Servo..
Features
- Include 2 sets servo mount
- Compatible with Tower Pro MG996, MG996R, SG5010 or HS322, HS422, Hitec, Parallax, Futaba S3003, etc 40 20 36mm servo.
- This set bracket can be assembled to a 2 Degree of Freedom gimbal. Pan and Tilt for a horizontal surface
- Aluminium Matte Coat, light and strong. high quality ball bearing, rotating smoothly
- A camera or sensor can be mount on the bracket for a robot or a rover. The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Dimensions: 1.02 x 6.69 x 4.72 inches | Weight: 0.24 Pounds
See On Amazon #28
8pcs JST to PH2.0 2Pin Adapter Cable for scx24 Battery Adapter E-Flite 120 SR to Blade mCP-X Lipo Battery
Asin: B09PFXCZJV | Model: SYP2PH | PartNumber: SYP2PH | Ean: 0033985743976 | UPC: 033985743976
Soft Silicone Covered, 22Awg Conductor, 7.5Cm (3Inch) Length.
Suitable For Scx24 Battery Adapter.
Convert The 120Sr / Mqx / Jst Pluged Batteries Into The Smaller Mcp-X Plug.
Jst Syp Connector To Ph2.0 Connector.
Features
- Includes 8pcs adapter cables
- JST SYP connector to PH2.0 connector
- Soft silicone covered, 22AWG conductor, 7.5cm (3inch) length
- Convert the 120SR / mQX / JST pluged batteries into the smaller mCP-X plug
- Suitable for scx24 battery adapter
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.39 x 4.72 x 3.15 Inches
See On Amazon #29
18 PCS Anti-Slipping Switch Rubber Cap Sheath Cover for FrSky X9D QX7 Flysky Spektrum Transmitter
Asin: B07Q3X849P | Model: 18PCAP | PartNumber: 18PCAP | Ean: 0053554158901 | UPC: 053554158901
Colorful Rubber Caps Make It Easy For You To Recognize The Function Of Each Switch.
If The Rubber Cap Longer Than Your Switch, You Can Trim It To A Proper Length By Scissors.
The Cap Can Be Put On The Switch Of Transmitter To Prevent Slipping And Reduce Pressure On Finger When Toggle The Switch.
Suitable For Most Brand Transmitters Like Frsky Taranis X9d Plus Qx7 X-Lite Horus X12s Flysky Fs-I6 Spektrum Dx6e Futaba.
Features
- Included 18 PCS rubber cap (4 black, 4 red, 2 white, 2 blue, 2 green and 2 transparent)
- Suitable for most brand transmitters like FrSky Taranis X9D Plus QX7 X-Lite Horus X12S Flysky FS-i6 Spektrum DX6e Futaba
- Colorful rubber caps make it easy for you to recognize the function of each switch
- The cap can be put on the switch of transmitter to prevent slipping and reduce pressure on finger when toggle the switch
- If the rubber cap longer than your switch, you can trim it to a proper length by scissors
- See more on Amazon...
Brand: elechawk | Manufacturer: elechawk
Weight: 0.01 pounds
See On Amazon #30
elechawk Waterproof LED Light Strips for RC Cars Trucks Airplanes Boats Drones Fixed Wing AR Wing Model Underglow Light (Green)
Asin: B09YPT8S14 | Model: L-9 | PartNumber: L-9 | Ean: 0033985744133 | UPC: 033985744133
Suitable For Rc Cars, Trucks, Airplanes, Boats, Drones, And Fixed-Wing Like Ar Wing, Skyhunter, Zohd Talon, Etc..
Acceptable Input Voltage: 5V To 7.5V. Recommend Input Voltage: 5V To 6V. Rating Power: 8.5W@6V (2 Light Strips).
The Lights Can Be Mounted Under The Chassis As Underglow Lights Or Mounted Inside The Body Case Of Rc Cars. The Total Length Of 1 Meter (39.4Inch) Light Strip Is Almost Suitable For All Sizes Of Rc Cars Or Airplanes.
Covered Thickened Transparent Heat Shrinkable Tube Makes The Light Strips Waterproof And Durable. It Is Water-Resistant, Hit-Resistant, And Wear-Resistant. The Led Strips Are Super Bright..
Features
- Package includes 2 waterproof LED light strips, 1 Y-cable.
- Covered thickened transparent heat shrinkable tube makes the light strips waterproof and durable. it is water-resistant, hit-resistant, and wear-resistant. The LED strips are super bright.
- Suitable for RC cars, trucks, airplanes, boats, drones, and fixed-wing like AR Wing, Skyhunter, ZOHD Talon, etc.
- The lights can be mounted under the chassis as underglow lights or mounted inside the body case of RC cars. The total length of 1 meter (39.4inch) light strip is almost suitable for all sizes of RC cars or airplanes
- Acceptable input voltage: 5V to 7.5V. Recommend input voltage: 5V to 6V. Rating power: 8.5W@6V (2 light strips)
- See more on Amazon...
Brand: elechawk | Manufacturer: YUYING
Dimensions: 0.39 x 5.91 x 3.94 inches
Warranty: Yes.
See On Amazon