findmall - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
6" Dial Caliper 0.001 Stainless Steel Shockproof 4-Way Measurement with Plastic Case
Asin: B089Y7P64P | Model: Dial Caliper | PartNumber: Dial Caliper | Ean: 0193499411829 | UPC: 193499411829
Purpose: Dial Caliper With Two Sets Of Jaws And A Probe Can Be Used To Measure Inner And Outer Diameters, Depths And Steps.
Measurement Mode: This Product Also Has The Zeroing Function, Rotating Bezel Makes It Easy To Reset Zero Or Choose A Different Baseline If Desired.
Design: The Dial Is Scaled In Inches, And The Dial Surface Is A Hard Glass Cover, Can Anti Scratch Coating, Anti Glare, Suitable For Home Or Diy Measurement.
Material: Finely Polished Stainless Steel Frame With Knurled Thumb Roller And Locking Screw Ensure Smooth Sliding And Accurate Positioning In Use.
Features
- Specification: Measurement in SAE (inch), measuring range is 0-6", accuracy is 0.001", resolution and repeatability is 0.0005", accurate measurement
- Material: Finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use
- Purpose: Dial Caliper with two sets of jaws and a probe can be used to measure inner and outer diameters, depths and steps
- Design: The dial is scaled in inches, and the dial surface is a hard glass cover, can anti scratch coating, anti glare, suitable for home or DIY measurement
- Measurement Mode: This product also has the zeroing function, rotating bezel makes it easy to reset zero or choose a different baseline if desired
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #2
findmall 1 x 2 x 3 Inch Blocks Matched Pair Hardened Steel 23 Holes Accuracy Machinist Milling
Asin: B07XM5BLHJ | Model: findmall | PartNumber: findmall | Ean: 6941110177913
Accuracy With Squareness On All Sides Within .0002" Per Inch.
Cross Drilling Design Gives Minimum Weight And Maximum Strength.
Hardened And Accuracy Ground On All 6 Sides Of Each Block.
23 Holes Consists Of 5 Tapped Holes That Are 3/8-16 For Clamping And 18 Untapped Holes.
Features
- Product Dimensions: 1" x 2" x 3", 2.1 lbs. weight
- 23 holes consists of 5 tapped holes that are 3/8-16 for clamping and 18 untapped holes
- Accuracy with squareness on all sides within .0002 per inch
- Hardened and accuracy Ground on all 6 sides of each block
- Cross drilling design gives minimum weight and maximum strength
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 pounds
See On Amazon #3
3600 Count Siding Nails 1-1/4 Inch by .092 Inch 15 Degree Ring Shank Hot-Dipped Galvanized Collated Wire Coil. Adapted to Gun Type CN55 or CN45.
Asin: B08K3CX9QZ | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6903036983627
Material - Hdg Steel (Hot-Dipped Galvanized Steel)..
Application - Wire Collated Nails Are Used For Rough Nailing Of Lathing And Sheathing Materials..
Corrosion Protection - Hot Dipped Galvanized Fiber Cement Material Offers Superior Corrosion Protection In All Pressure Treated Lumber..
Structural Features - Full Roundhead And Ring Shank.Adapted To Gun Type Cn55 Or Cn45..
Features
- Size and Quantity - Measures 1-1/4 in. in length by 0.092 in. in diameter and comes in a 3600 pack. Cap diameter 5.1-5.3mm.
- Structural Features - Full RoundHead and Ring Shank.Adapted to gun type CN55 or CN45.
- Material - HDG Steel (Hot-Dipped Galvanized Steel).
- Corrosion Protection - Hot dipped galvanized fiber cement material offers superior corrosion protection in all pressure treated lumber.
- Application - Wire collated nails are used for rough nailing of lathing and sheathing materials.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 9.20 pounds
See On Amazon #4
E71T-GS 0.035/0.030 In (1.0/0.8 MM) 10Lbs Gasless Flux Core Welding Wire (0.035)
Asin: B0841V7X2B | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110141655
Features: Self-Shielded; No Welding Protection Gases Needed. Single-Pass Fillet And Lap Welding. Wrapped In Vacuumed Aluminum Foil..
Application : Typically Used For Light Structural, Machinery Part Fabrication, Prefab Construction, Railroad Car Repair, Short Assembly Welds, Tanks And General Fabrication..
Advantages : Great In Single- Or Multi-Pass Welds Particularly On Thin-Gauge Mild Or Galvanized Steel..
Base Materials : Astm A36 Gr.All; A123; A179; A181 Gr.60, A266 Gr.1.
Features
- Specifications : 8-in spool, 2-in center hole, Dia :0.035/0.030in (1.0mm/0.8mm) , Weight :10.38lbs / 4.71kg
- Base Materials : ASTM A36 Gr.all; A123; A179; A181 Gr.60, A266 Gr.1
- Features: Self-shielded; no welding protection gases needed. Single-pass fillet and lap welding. Wrapped in vacuumed aluminum foil.
- Advantages : Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel.
- Application : Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 10.00 Pounds
See On Amazon #5
11" Locking C-Clamp 5Pack Locking Pliers Adjustable Welding Clamps w/Regular Tip and Swivel Pad for Shop Home Farm and Automotive
Asin: B08CKXWC1G | Model: Dose Not Apply | PartNumber: Dose Not Apply | Ean: 6903036022067
Feature: A Easy Turn-Screw Adjusts The Size And Pressure To Give You A Strong Clamp While You Work..
Application: Fit For Home, Workshop, And Professional Use, Providing Clamping For Light Applications, Such As Woodworking, Welding Jobs, Pocket-Screw Joinery, Cabinetry, Repairing And So On..
Advantage: The Additional Adjustable Screw Attached To The Handle Provides The Ideal Clamping Pressure, Making Your Work More Easily..
Structures: Designed With Thickened Swivel Pad, Which Can Effectively Prevent Scratches And Ensure Solid Clamping That Helps Clamp A Variety Of Shapes Without Deformation..
Features
- Material: Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
- Structures: Designed with thickened swivel pad, which can effectively prevent scratches and ensure solid clamping that helps clamp a variety of shapes without deformation.
- Feature: A easy turn-screw adjusts the size and pressure to give you a strong clamp while you work.
- Advantage: The additional adjustable screw attached to the handle provides the ideal clamping pressure, making your work more easily.
- Application: Fit for home, workshop, and professional use, providing clamping for light applications, such as woodworking, welding jobs, pocket-screw joinery, cabinetry, repairing and so on.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #6
findmall 1 x 2 x 3 Inch Blocks Matched Pair No Holes Hardened Steel Accuracy Ground Machinist 123 Blocks Set Up Blocks Fit for Accuracy Grinding Layouts
Asin: B07XXP9DKY | Model: findmall | PartNumber: findmall | Ean: 6941110177920
Accuracy And Squareness On All Sides Within .0001"-.0002".
Quantity Deals On 123 Blocks, Parallels, Sets, And Inspection/Set-Up Tooling In The All Industrial Tool Supply.
Dimensions- 1" X 2" X 3", 3.5 Lbs. Weight.
Made Of Precision-Grade Tool Steel Hardened And Ground On All 6 Sides Of Block.
Features
- Heat treated and case hardened to HRC 57-62
- Made of precision-grade tool steel hardened and ground on all 6 sides of block
- Accuracy and squareness on all sides within .0001-.0002
- Dimensions- 1 x 2 x 3, 3.5 lbs. weight
- Quantity deals on 123 blocks, parallels, sets, and inspection/set-up tooling in the All Industrial Tool Supply
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 pounds
See On Amazon #7
Earth Auger Drill Bits 4" 6" 8" 10" 12" for Gas Powered Post Fence Hole Digger (4inch)
Asin: B084DKB6F4 | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110143710
Preserve: Drills Holes In All Types Of Soil; The Dirt Removed Is Left Around Edge Of Hole In Loose, Easy-To-Pack Condition..
Application: Idea For Installing Wooden Decorative Fence, Chain Link Fence, Deck, Patio, Planting Trees Or Shrubs, Drilling Flag Holes Etc..
Convenience: Universal 3/4" In. Round Drive Shaft, Exponentially Increases Planting Speed And Ease..
Material: Durable Carbon Steel Guide Drill Bit With Tungsten Carbide Cutting Head, Black Powder Coating, Not Easy To Rust And Corrode..
Features
- Specifications: 31" Long for each diameter, compatible with any Auger machine head with 3/4" Shaft, built using heavy wall tube for maximum strength drilling.
- Material: Durable carbon steel guide drill bit with tungsten carbide cutting head, black powder coating, not easy to rust and corrode.
- Preserve: Drills holes in all types of soil; the dirt removed is left around edge of hole in loose, easy-to-pack condition.
- Convenience: Universal 3/4 in. round drive shaft, exponentially increases planting speed and ease.
- Application: Idea for installing wooden decorative fence, chain link fence, deck, patio, planting trees or shrubs, drilling flag holes etc.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 0.00 pounds
See On Amazon #8
findmall 3600 Count 1-3/4-Inch x .090-Inch Ring Shank 304 Stainless Steel Siding Nails 15-Degree Collated Wire Coil Siding Nails for Cement Board Siding or Fencing Applications
Asin: B09LQTT2WX | Model: Does Not Apply | PartNumber: Does Not Apply
Size - Measures 1-3/4 Inch In Length By 0.090 Inch In Diameter. Cap Diameter 5.3-5.6Mm..
Package - You Will Receive 3600 Pieces Stainless Steel Siding Nails In A Pack..
Application - Wire Collated Nails Are Used For Rough Nailing Of Lathing And Sheathing Materials..
Structural Features - 15-Degree Ring Shank. Adapted To Gun Type Cn55/Cn57..
Features
- Material - It is made of Stainless Steel which can offer superior corrosion protection.
- Structural Features - 15-Degree Ring Shank. Adapted to gun type CN55/CN57.
- Size - Measures 1-3/4 inch in length by 0.090 inch in diameter. Cap diameter 5.3-5.6mm.
- Application - Wire collated nails are used for rough nailing of lathing and sheathing materials.
- Package - You will receive 3600 pieces Stainless Steel Siding Nails in a pack.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 12.13 pounds
See On Amazon #9
findmall 8Pcs Wood Plug Cutter Drills Bit Set (5/8", 1/2", 3/8", 1/4") Straight and Tapered Taper, Carbon Steel Woodworking Cutting Tool
Asin: B07MZKJ99T | Model: Does not apply | PartNumber: Does not apply | Ean: 7334121275676
Material: Carbon Steel, Titanium-Coated, Sharp, Solid And Durable For Long Life.
Note: Suitable For Bench Drill, Bench Drill Speed Should Not Be Too Fast, Too Fast Speed Will Smoke And Charred.Etc..
Advantage: Chamfered Cutters Make Tapered Plugs To Fill Countersunk Holes, Easy To Operate.
Include: 4 Standard Plug Cutters And 4 Four-Tooth Chamfered Cutters.
Features
- Description: deep Plug Cutter Set, Shank Diameter: 9.3mm; Diameter sizes: 1/4", 3/8", 1/2", 5/8"
- Include: 4 standard plug cutters and 4 four-tooth chamfered cutters
- Material: carbon Steel, titanium-coated, sharp, solid and durable for long life
- Advantage: chamfered cutters make tapered plugs to fill countersunk holes, easy to operate
- Note: suitable for bench drill, bench drill speed should not be too fast, too fast speed will smoke and charred.etc.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 pounds
See On Amazon #10
findmall MT2 Medium Duty Live Center MT 2MT Triple Bearing Lathe Medium Duty CNC
Asin: B07W7WPZ5T | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110108092
Mt2 Live Center Has Good Sealing Performance, And The Front End Is Sealed To Prevent Cutting Fluid And Impurities From Entering.
Mt2 Live Center Is Applicable To Cnc Lathes, Ordinary Manual Lathes And High-Speed Lathes, And Products Requiring High Processing Speed And High Accuracy.
Mt2 Live Center Accuracy Machining, High Accuracy, Good Stability, Ensure Stability And Reliability In High-Speed Operation.
Mt2 Live Center Is Made Of Steel With High Hardness, More Durability And Longer Service Life.
Features
- #2 morse-taper (2MT) shank, 60-degree point, 0.0003" concentricity, 5000 max RPM, 12-28 NF drawbar thread
- MT2 live center is made of steel with high hardness, more durability and longer service life
- MT2 live center has good sealing performance, and the front end is sealed to prevent cutting fluid and impurities from entering
- MT2 live center accuracy machining, high accuracy, good stability, ensure stability and reliability in high-speed operation
- MT2 live center is applicable to CNC lathes, ordinary manual lathes and high-speed lathes, and products requiring high processing speed and high accuracy
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #11
findmall Universal Table Vise 3" Aluminum Swivel Bench Vise 360 Degrees Rotating Fit for Holding Small Parts in Jewelry Hobby Model Making Electronics and More
Asin: B08BP3XGPN | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 0191170678431 | UPC: 191170678431
Design - Clamps Onto Surfaces Up To 2" Thick For General Purpose And Light-Duty Work..
Convenience - All Assembly Hardware And Parts Are Included. Clear And Brief Instruction Make It Much Easier To Put Together. No Professional Tools Are Needed. The Lightweight Design Makes Convenient For You To Move..
Application - This Vise Used To Secure An Object To Allow Work To Be Performed On It. It Is Perfect For Holding Small Parts In Jewelry, Hobby, Model Making, Electronics And Other Applications..
Features - Head Rotates 360° And Tilts 45°, Which Is Very Convenient To Turn In Any Direction After Mounting. It Provides The Best Angle For Your Work..
Features
- Material - Rubber bumpers, aluminum body to deliver strength for gripping different kinds of objects.
- Features - Head rotates 360 and tilts 45 , which is very convenient to turn in any direction after mounting. It provides the best angle for your work.
- Design - Clamps onto surfaces up to 2 thick for general purpose and light-duty work.
- Application - This vise used to secure an object to allow work to be performed on it. It is perfect for holding small parts in jewelry, hobby, model making, electronics and other applications.
- Convenience - All assembly hardware and parts are included. Clear and brief instruction make it much easier to put together. No professional tools are needed. The lightweight design makes convenient for you to move.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #12
findmall 5.9 x 33 Hand Operated Auger Drill Bit T Shaped Manual Hole Auger Spiral Drill Bit for Planting Bulbs Potted Plants
Asin: B0BVP5YYGG
Easy To Use: You Can Install And Use It Directly, Assemble It Manually, And Use It Conveniently. You Can Disassemble And Store It When It Is Not In Use.
What You Get: 1Pc 5.9X 33 Hand Operated Auger Drill Bit, Friendly Customer Service.
Wide Application: The Auger Drill Can Be Used For Planting Bulbs, Potted Plants, Vegetables, Flowers, Shrubs, And Also For Mixing Seeds, Soil, Fertilizer, And Paint. You Can Also Drill Outdoor Tent Holes And Beach Umbrella Holes To Meet Your Various Needs.
Standard Size: 5.9 Inch Diameter X 33 Inch Length.
Features
- Duty steel construction: It is made of heavy steel with black paint on the surface, which is not easy to rust. It has a three-level connection structure, and the handle is equipped with a textured rubber sleeve, which is easy to use
- Standard size: 5.9 inch diameter x 33 inch length
- Easy to use: you can install and use it directly, assemble it manually, and use it conveniently. You can disassemble and store it when it is not in use
- Wide application: The auger drill can be used for planting bulbs, potted plants, vegetables, flowers, shrubs, and also for mixing seeds, soil, fertilizer, and paint. You can also drill outdoor tent holes and beach umbrella holes to meet your various needs
- What you get: 1Pc 5.9x 33 hand operated auger drill bit, friendly customer service
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Dimensions: 6.30 x 13.78 x 6.69 inches
See On Amazon #13
findmall 50Pcs 2 Inch Brown Quick Change Surface Prep Conditioning Discs, Coarse Grit for Cleaning, Finishing and Deburring on All Metals
Asin: B0BJ68QBHD | Model: 2905359-931216 | PartNumber: 2905359-931216
Thicker Disc: Our Non-Woven Surface Conditioning Discs Are Thicker Than Conventional Discs. More Abrasives Fibers, Resins Added.
Quick Change: High Strength Plastic Type R Twist Lock Attachment, Offers Quick And Easy Disc Change-Out For Multi-Step Finishing Processes.
1/4 Inch Shank Holder: Fits Power Drills, Die/Air Grinders Andother Power Rotary Tools.
Quality Matetrial: Imported Nylon Fibers Material & Aluminum Oxide Abrasive, Provides Faster Cut Rate For Consistent Finish And Higher Performance Than Other Discs.
Features
- Sanding Discs: 50 x 2 inch rough surface conditioning disc roll lock grinder sandpaper suitable for mold grinding machine
- Quality Matetrial: Imported nylon fibers material & aluminum oxide abrasive, provides faster cut rate for consistent finish and higher performance than other discs
- Thicker Disc: Our non-woven surface conditioning discs are thicker than conventional discs. More abrasives fibers, resins added
- 1/4 Inch Shank Holder: Fits power drills, die/air grinders andother power rotary tools
- Quick Change: High strength plastic type R twist lock attachment, offers quick and easy disc change-out for multi-step finishing processes
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Dimensions: 4.13 x 7.28 x 5.12 inches
See On Amazon #14
58 Pcs Pro-Series 1/2" T-Slot 3/8"-16 Stud Clamping Kit Fit for Bridgeport Mill
Asin: B0813G1J62 | Ean: 6941110123484
Structural Stability: 1/2 Inch T-Slot Clamping Kits Have Strong Clamping Force, Stable Structure, And Are Simple And Easy To Use. (This Red And Blue Box Is Randomly Shipped, With Only Color Differences Between The Boxes).
24 Studs: 4 Of Each Length, Respectively 3" , 4" , 5" , 6" , 7" And 8" , Including 4 Coupling Nuts, 6 Flange Nuts, 6 Forged Steel Step Clamps, 6 T-Nuts And 12 Steel Step Blocks..
Applicable: Widely Used For Clamping Workpieces In Ordinary Milling Machines, Cnc Machining, And Various Metal Processing..
Stud Size : 3/8"-16.
Features
- Table Slot: 1/2"
- Stud Size : 3/8-16
- Structural stability: 1/2 Inch T-Slot clamping kits have strong clamping force, stable structure, and are simple and easy to use. (This red and blue box is randomly shipped, with only color differences between the boxes)
- Applicable: Widely used for clamping workpieces in ordinary milling machines, CNC machining, and various metal processing.
- 24 studs: 4 of each length, respectively 3 , 4 , 5 , 6 , 7 and 8 , including 4 coupling nuts, 6 flange nuts, 6 forged steel step clamps, 6 T-nuts and 12 steel step blocks.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #15
1200 Count 1-3/4-Inch x .090-Inch Ring Shank Stainless Steel Siding Nails 15-Degree Collated Wire Coil Siding Nails for Cement Board Siding or Fencing Applications.Adapted to gun type CN55/CN57.
Asin: B09LQP3ZD6 | Model: Does Not Apply | PartNumber: Does Not Apply
Size - Measures 1-3/4 Inch In Length By 0.090 Inch In Diameter. Cap Diameter 5.3-5.6Mm..
Package - You Will Receive 1200 Pieces Stainless Steel Siding Nails In A Pack..
Application - Wire Collated Nails Are Used For Rough Nailing Of Lathing And Sheathing Materials..
Structural Features - 15-Degree Ring Shank. Adapted To Gun Type Cn55/Cn57..
Features
- Material - It is made of Stainless Steel which can offer superior corrosion protection.
- Structural Features - 15-Degree Ring Shank. Adapted to gun type CN55/CN57.
- Size - Measures 1-3/4 inch in length by 0.090 inch in diameter. Cap diameter 5.3-5.6mm.
- Application - Wire collated nails are used for rough nailing of lathing and sheathing materials.
- Package - You will receive 1200 pieces Stainless Steel Siding Nails in a pack.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 3.97 Pounds
See On Amazon #16
findmall 20 Pair 1/32 x 6 Accuracy Parallel Block Set .0001 Hardened Accuracy Machinist Tools with Case
Asin: B095YJSFWT | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6903036862090
Material - Made Of High Quality Alloy Steel; Hardened And Ground From Stabilized Stock..
Height - 1/8 Incrementation Of Height From 1/2 To 1-11/16..
Accuracy - Parallelism: +/- .0001; Matched Pair Height: +/- .0001..
Dimension - All Are 6 Long And And 1/32 Wide Or Thick..
Features
- Product - Combo Set, 20 Matched Pairs.
- Dimension - All are 6 Long and and 1/32 Wide or Thick.
- Material - Made of High Quality Alloy Steel; Hardened and Ground from Stabilized Stock.
- Accuracy - Parallelism: +/- .0001; Matched pair height: +/- .0001.
- Height - 1/8 Incrementation of height from 1/2 to 1-11/16.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 3.20 Pounds
See On Amazon #17
findmall Vacuum Base Vise Portable Base Vise 3.15" Jaw Width Pivots Multi-Angle Rotate 360 Fit for Various Smooth Work Surfaces
Asin: B08CB11L3N | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6903036020858
Multi-Purpose - Vacuum Base Vise Mounts To Various Smooth Work Surfaces Such As Laminates, Steel, Granite, Glass And Others..
Instructions - Vacuum Base Is Operated With Steel Lever To Actuate Vacuum. Clean The Adsorption Surface Before Use. If The Adsorption Is Not Tight, You Can Also Dip In Water On The Adsorbed Surface To Increase Tension..
Flexibility - Vise Head Swivels 360-Degree And Pivots 90-Degree Positioning Work Ideally Without Removing Clamped Part From Vise..
Advantage - Rubber Jaw Covers Protect Delicate Items From Damage..
Features
- Material - Body parts are accuracy die cast for longevity.
- Advantage - Rubber Jaw Covers protect delicate items from damage.
- Multi-Purpose - Vacuum Base Vise mounts to various smooth work surfaces such as laminates, steel, granite, glass and others.
- Flexibility - Vise head swivels 360-Degree and pivots 90-Degree positioning work ideally without removing clamped part from vise.
- Instructions - Vacuum base is operated with steel lever to actuate vacuum. Clean the adsorption surface before use. If the adsorption is not tight, you can also dip in water on the adsorbed surface to increase tension.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #18
findmall Heavy Duty Swivel Caster Wheels 24 Pack 2 Inch Rubber Base with Top Plate & Bearing
Asin: B09MMYH56Q | Model: Does Not Apply | PartNumber: Does Not Apply
Plate Size: 1.9 (49Mm) X 2.2 (58Mm) / Hole Center To Hole Center: 1.3 (35Mm) X 1.7 (45Mm).
24 Pack 2 No Brake Caster. Rotate 360 Degrees. Smooth & Silent & Sturdy.
Mounting Hole Dimensions: 0.23 (6Mm) Round / Wheel Dia.: 2 (50Mm) / Wheel Width: 0.8 (21Mm).
Load Capacity: 55Lbs Each.
Features
- Wheel Material: Rubber
- Load Capacity: 55lbs each
- Plate Size: 1.9 (49mm) x 2.2 (58mm) / Hole center to hole center: 1.3 (35mm) x 1.7 (45mm)
- Mounting hole dimensions: 0.23 (6mm) round / Wheel Dia.: 2 (50mm) / Wheel Width: 0.8 (21mm)
- 24 pack 2 no brake caster. Rotate 360 degrees. Smooth & Silent & Sturdy
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Dimensions: 5.31 x 9.06 x 6.30 Inches | Weight: 7.80 pounds
See On Amazon #19
12 Pcs Precision Angle Block Set Machinist Tool Angle Gauge Block 1/4 - 30 Lathes Milling Ground Gauge Angle Calibration Gage Inspection Block Set
Asin: B08FC8XNWL | Ean: 6903036032400
Features - 0.25" Thickness; Hardened Steel Material; Precision Grinding; +/- 20 Seconds, 0.0001" Per Inch High Precision..
Application - For Angle Set-Ups In Tooling, Productions And Inspection; Hardened And Precision Ground..
Carrying Case - Hard-Shelled Carrying Case Keeps The Blocks Organized And Protected From Contaminants..
Includes - 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, And 30-Degree Hardened-Steel Blocks..
Features
- Product - Workshop-grade set features 12 individual steel blocks of various angles.
- Includes - 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks.
- Features - 0.25 thickness; Hardened steel material; Precision grinding; +/- 20 Seconds, 0.0001 per inch high precision.
- Carrying case - Hard-shelled carrying case keeps the blocks organized and protected from contaminants.
- Application - For angle set-ups in tooling, productions and inspection; Hardened and precision ground.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 1.00 Pounds
See On Amazon #20
Heavy Duty Hand Winch 600Lbs Hand Crank Strap Gear with 8m Steel Wire Manual Operated Two-Way Ratchet ATV Boat Trailer Marine for Trailering or Loading Boats Personal Watercraft and Lawn Equipment
Asin: B08CNF2258 | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6903036022371
Size - Body Size (L X W X H): 11.8 X 8.2 X 12Cm/4.6 X 3.2 X 4.7" (Approx), Small Portable Size That Won't Take Up Much Space When Use..
Two-Way Ratchet - Mooring Hook Equipped With A Safety Pawl. Allows Forward And Reverse Ratcheting. Can Be Used To Lift Heavy Objects, Drag Boats, Or Volleyball Net, Ideal For Trailering Or Loading Boats, Personal Watercraft, And Lawn Equipment..
Comfort Grip Handle - Handle Length: 20.7Cm/8.15", Makes Cranking Easier And A Comfort Grip Reduces Hand Fatigue..
Capacity - 600 Lbs Pulling Capacity, Designed To Provide Excellent Load Lifting Facility, Solution For A Wide Variety Of Applications..
Features
- Steel Structure - Heavy duty steel construction, hardened steel gears, gear ration: 4.1 : 1. High carbon steel gears to resist wear and last longer, superior corrosion resistance and mooring hook equipped with a safety pawl. This winch is solidly constructed with steel wire rope. Diameter of rope: 4.2mm/0.16inch. The cable of the crank winch measures 8m/26.2ft long.
- Capacity - 600 lbs pulling capacity, Designed to provide excellent load lifting facility, solution for a wide variety of applications.
- Size - Body size (L x W x H): 11.8 x 8.2 x 12cm/4.6 x 3.2 x 4.7 (Approx), small portable size that won't take up much space when use.
- Comfort Grip Handle - Handle length: 20.7cm/8.15, makes cranking easier and a comfort grip reduces hand fatigue.
- Two-Way Ratchet - Mooring hook equipped with a safety pawl. allows forward and reverse ratcheting. Can be used to lift heavy objects, drag boats, or volleyball net, Ideal for trailering or loading boats, personal watercraft, and lawn equipment.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #21
findmall Electronic Digital Caliper Stainless Steel Body with Large LCD Screen 0-6 Inches Inch/Millimeter Conversion
Asin: B07WJR7DP7 | Model: Electronic Digital Caliper | PartNumber: Electronic Digital Caliper | Ean: 6941110168225
Purpose: Digital Caliper Measuring Tool With Two Sets Of Jaws And A Probe Can Be Used To Measure Inner And Outer Diameters, Depths And Steps.
Measurement Mode: One Click To Quickly Switch Between Two Measurement Modes: Inches And Millimeters. This Product Also Has The Zeroing Function, You Can Press The "Zeroing" Button At Any Position Of The Measurement, Easily Zeroing And Start A New Measurement.
Easy To Read: The Digital Caliper Has A Large Easy-To-Read Display Screen, Which Is Easy To Read Clearly. You Can Get Accurate Measurement Results More Conveniently And Quickly.
Specification: Accuracy ±0.001"/ ±0.02Mm, Measurement Range 0 - 6"/ 0 - 150 Mm, Resolution 0.0005"/ 0.01Mm, Accurate Measurement, Suitable For Home Or Diy Measurement.
Features
- Material: Finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use
- Specification: Accuracy 0.001/ 0.02mm, measurement range 0 - 6/ 0 - 150 mm, resolution 0.0005/ 0.01mm, accurate measurement, suitable for home or DIY measurement
- Purpose: Digital caliper measuring tool with two sets of jaws and a probe can be used to measure inner and outer diameters, depths and steps
- Easy to Read: The digital caliper has a large easy-to-read display screen, which is easy to read clearly. You can get accurate measurement results more conveniently and quickly
- Measurement Mode: One click to quickly switch between two measurement modes: inches and millimeters. This product also has the zeroing function, you can press the zeroing button at any position of the measurement, easily zeroing and start a new measurement
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #22
findmall 32 x 2 Extended Length Auger Drill Bit Garden Plant Auger for Planting Bulb 3/8 Hex Drive Drill Earth Auger Bulb Planter Tool
Asin: B0BVNV7PG7
Easy And Efficient: With This Extended Length Auger Drill, You Can Easily Loosen The Soil Without Bending Down For A Long Time. It Can Drill Hundreds Of Holes In A Few Minutes, Saving You A Lot Of Time And Energy.
What You Get: 1Pc 32 Inch Auger, Friendly Customer Service.
Wide Application: The Auger Drill Can Be Used For Planting Bulbs, Potted Plants, Vegetables, Flowers, Shrubs, And Also For Mixing Seeds, Soil, Fertilizer, And Paint. You Can Also Drill Outdoor Tent Holes And Beach Umbrella Holes To Meet Your Various Needs.
Standard Size: 2 Inch Diameter X 32 Inch Length Fit 3/8 Inch Hex Drive Drill.
Features
- Duty steel construction: Made of heavy steel, 7 circles of dense spiral blade, glossy black paint, not easy to rust
- Standard size: 2 inch diameter x 32 inch length fit 3/8 inch hex drive drill
- Easy and efficient: With this extended length auger drill, you can easily loosen the soil without bending down for a long time. It can drill hundreds of holes in a few minutes, saving you a lot of time and energy
- Wide application: The auger drill can be used for planting bulbs, potted plants, vegetables, flowers, shrubs, and also for mixing seeds, soil, fertilizer, and paint. You can also drill outdoor tent holes and beach umbrella holes to meet your various needs
- What you get: 1Pc 32 inch Auger, friendly customer service
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Dimensions: 2.36 x 31.89 x 2.36 inches | Weight: 1.32 pounds
See On Amazon #23
findmall 1 x 2 x 3 Inch Blocks 0.0001 Ultra Accuracy 1 x 2 x 3 Blocks Set 23 Hole with Screws Hex Key Plastic Case
Asin: B08KQ73QFP | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6903036981678
Accuracy - Size Within +/- .0001; Flatness And Parallelism Within .0001; Squareness On All Sides Is 0.0003 Per Inch..
Application - Used For Set-Up, Layout And Inspection Jobs..
Feature - Cross Drilling Design Allows Efficient Use Of Lower Weight With Maximum Strength..
Material - Made Of Hardened Tool Steel And Accuracy Ground On All Six Sides; Heat Treat And Hardness 56 To 60 Rc..
Features
- Blocks - 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes.
- Material - Made of hardened tool steel and accuracy ground on all six sides; Heat treat and hardness 56 to 60 RC.
- Accuracy - Size within +/- .0001; Flatness and parallelism within .0001; Squareness on all sides is 0.0003 per inch.
- Feature - Cross drilling design allows efficient use of lower weight with maximum strength.
- Application - Used for set-up, layout and inspection jobs.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 0.01 pounds
See On Amazon #24
findmall 12 PCS ER20 1/8"-1/2" Super Accuracy ER-20 Collets Set With 3/16 1/4 3/8
Asin: B07T5JMNYS | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 7081781697910
Run-Out Tolerance: 0.015Mm (0.0006").
Good Quality, Good Operation..
Gripping Range: 1/8"-1/2".
Material: High Grade 1065 Carbon Steel, Sturdy And Durable..
Features
- 12pcs ER20(1/8"-1/2") spring collet set fit for CNC milling lathe tool & workholding engraving machine.
- Material: High grade 1065 carbon steel, sturdy and durable.
- Run-Out Tolerance: 0.015MM (0.0006)
- Gripping Range: 1/8-1/2
- Good quality, good operation.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #25
findmall 9 Set High Speed Steel Adjustable Hand Reamers 15/32 Inch to 1-5/32 Inch Fit for Drilling Machine and Other Machine
Asin: B081CCNX5C | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110125259
The Adjustable Reamer Is Made Of Hss(High Speed Steel) With Good Hardness And Toughness.
The Reamer Is Suitable For Drilling Machines And Other Equipment.
Adjustable Reamer Is Straight Flute With Straight Handle.
Product Includes 9Pcs High Speed Adjustable Hand Reamers.
Features
- The reamer range is 11.75 mm - 29.5 mm (15/32 inch to 1-5/32 inch)
- Product includes 9pcs high speed adjustable hand reamers
- The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness
- Adjustable reamer is straight flute with straight handle
- The reamer is suitable for drilling machines and other equipment
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #26
#35 Roller Chain 160 Links 5 Feet with 2 Connecting Links and 1 Offset Links Fit for Go Kart and Mini Bike
Asin: B07ZLYPQ3P | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110119678
Features: The Chain Undergoes Heat Treatment Process To Improve Hardness; Unique Polishing Process, Smooth Surface.
Applications: Applications That The Chain Will Fit: Go-Karts, Scooters, Mini Bikes.
Advantages: Accurate Pitch And More Stable Usage Process.
Material: Carbon Steel Material, Long Service Life, Not Easy To Break And Wear.
Features
- Roller Chain: 35 Roller Chain, 5 Feet, with 2 joints and 1 and a half joints (One connecting link is on the chain)
- Material: Carbon steel material, long service life, not easy to break and wear
- Features: The chain undergoes heat treatment process to improve hardness; Unique polishing process, smooth surface
- Advantages: Accurate pitch and more stable usage process
- Applications: Applications that the chain will fit: go-karts, scooters, mini bikes
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Dimensions: 0.14 x 60.00 x 0.14 Inches | Weight: 1.20 Pounds
See On Amazon #27
findmall Thin Parallel Bar Set - 10 Pair 1/8" X 6"
Asin: B07XXN89TW | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110177906
Material: Made Of Quality Tool Steel, Durable, Accuracy Ground And Hardened..
Including: 2 Pieces 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" & 1-5/8"..
Storage Boxes: Comes In A Durable Plastic Case For Easy Storage And Portability..
Accuracy: Accuracy Ground, Parallel And Accurate Within +/- .0003"..
Features
- Specifications: Each parallel is 1/8" thick x 6" long with 2 holes.
- Accuracy: Accuracy ground, parallel and accurate within +/- .0003.
- Material: Made of quality tool steel, durable, accuracy ground and hardened.
- Storage boxes: Comes in a durable plastic case for easy storage and portability.
- Including: 2 pieces 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2 & 1-5/8.
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #28
New #40 Roller Chain 10 Feet with 2 Connecting Links Fit for Go Kart and Mini Bike
Asin: B07ZLX6WJF | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110119692
40 Roller Chain With 2 Connecting Link (One Connecting Link Is On The Chain).
Heat-Treated Side Plates To Ensure The Strength And Durability Of The Roller Chain.
Suitable For Go-Karts, Scooters, Mini Bikes Chain Replacements.
100% Tested Before Shipping.
Features
- Length: 10 Feet
- 100% tested before shipping
- 40 Roller Chain with 2 Connecting Link (One connecting link is on the chain)
- Suitable for Go-karts, Scooters, Mini Bikes Chain Replacements
- Heat-treated side plates to ensure the strength and durability of the roller chain
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #29
4" Bench Vise with Anvil 360 Swivel Locking Base Table top Clamp Heavy Duty Vice
Asin: B07WZKQ1ZD | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 6941110170891
Easy To Use Without External Force, Manually Tighten The Handle Can Work Easily.
The Bench Vise Is Suitable For Home, Workshop, Providing Clamping For Light Applications, Such As Cutting Conduit, Drilling, Woodworking, Metalworking, Sanding Or Planing, Sawing And So On.
It Has A Hardened And Polished Replaceable Jaw And Large Anvil.
The Bench Vice Has A Powerful Clamping Force And Can Fix Workpieces Very Securely. Clamping Force: 7Kn(700Kg).
Features
- 4 inch 360 Double locking swivel base
- The bench vice has a powerful clamping force and can fix workpieces very securely. Clamping force: 7KN(700Kg)
- Easy to use without external force, manually tighten the handle can work easily
- It has a hardened and polished replaceable jaw and large anvil
- The bench vise is suitable for home, workshop, providing clamping for light applications, such as cutting conduit, drilling, woodworking, metalworking, sanding or planing, sawing and so on
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
See On Amazon #30
findmall 2 Inch Boring Head MT3 Carbide Boring Bar Set Milling Set Fit for Milling, Shaping and Drilling Machines
Asin: B09FLLW1D3 | Model: 2443741-326094 | PartNumber: 2443741-326094
Advantage: The Boring Head Has A Hardened And Ground Adjusting Screw Designed For Long Lasting And Trouble Free Use Made Of Powered Casting Steel For Stronger Strength.
Package: Set Includes Carbide Tipped Boring Bars.
Applied Range: Used In Milling, Shaping And Drilling Machines.
Size: The Tool Capacity Is Up To 1/2 Inch - The Shank To The Head Is 7/8 Inch 20 - The 3Mt Shank Has A 3/8 Inch -16 Thread.
Features
- Material: Made of high grade tool steel, wide holding range, integrated design maximizes rigidity & accuracy
- Size: The tool capacity is up to 1/2 inch - the shank to the head is 7/8 inch 20 - the 3MT shank has a 3/8 inch -16 thread
- Advantage: The boring head has a hardened and ground adjusting screw designed for long lasting and trouble free use made of powered casting steel for stronger strength
- Applied Range: Used in milling, shaping and drilling machines
- Package: Set includes carbide tipped boring bars
- See more on Amazon...
Brand: findmall | Manufacturer: findmall
Weight: 0.00 pounds
See On Amazon