supeiqality - Buying Guide

Bestselling from supeiqality on Amazon

1. 2024 Upgrade 31501 33488 33727 RV Furnace Ignition Circuit Control Board kit(OEM) For Atwood Dometic...
2. 2024 Upgrade 905-212 Bonnet and Poppet Repair Kit for Febco 765-1 Inch & 1-1/4 Inch Backflow Prevent...
3. 819T Trailer Gate Spring Latch Repair Kit*1 for Carry-On Utility Trailer 4X8NG 5XI0LGW2K 6X8GW13 7X1...
4. 2024 Upgraded 09951 Water Heater Element Socket Suitability 1/2-Inch for Electric Water Heater Remov...
5. 2024 Upgrade 571-VAC-CHK-A RV Vacuum Breaker Check Valve 1/2 DN For RV Black Tank Cleaning System Re...
6. supeiqality 2024 Upgrade Toe Alignment Tool Plates DIY Alignment Tool Wheel Alignment Tool Alignment...
7. 2024 Upgrade 603-832 Coolant Reservoir For 2014-2021 Ram ProMaster 1500 2500 3500 Replace 52014880AA...
8. 2024 Upgrade 571-VAC-CHK-A RV Vacuum Breaker Check Valve 1/2 DN Male for RV Black Tank Cleaning Syst...
9. 2024 Upgrade 0261230029 9125462 Manifold Absolute Pressure MAP Sensor for Volvo C70 S40 S60 S80 V40 ...
10. 2023 Upgrade 905-212 Bonnet and Poppet Repair Kit for Febco 765-1 Inch & 1-1/4 Inch Backflow Prevent...

Features

• Please select the seller: ASIAA-US is authentic, We'll file a complaint against any seller who follows us. Specifications Our 31501 circuit board has replaced the ordinary atwood 31501 circuit board. Adopting more precise craftsmanship, with a waterproof coating on the surface, corrosion resistance, short circuit prevention, long service life, designed specifically for the specifications and dimensions of Dometic Atwood Hydro Flame Corp RV Furnace parts.
• Easy Installation When your Atwood RV stove is not working properly, it may be due to damage to your RV Dometic Furnace Ignition Board. Before installation, cut off the power, wear work gloves, remove the original Furnace Control Board, and install our 31501 circuit board correctly.
• Compatible Model 31501 circuit boardreplacement: 33488 33727 compatible with Dometic Atwood Hydro Flame Corp 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 85-I Series,85-II Series,8500-III Series,8500-IV Series , 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111,DFMD30111,DFMD25111, DFMD35111 DFSD12111, DFSD16111 DFSD20111 ect RV Furnace parts.
• Product Advantage 31501 circuit board is carefully designed with high-quality materials, perfectly matched to prevent short circuits,the quality has far exceeded that of OEM.
• Excellent After-sales Service If you encounter any problems while replacing the 31501 circuit board, including any issues with the product within 1 year, we will be 100% responsible, so you can purchase with confidence and use it with peace of mind.
• See more on Amazon...

Features

• Compatible Model Our 2024 Upgraded 905-212 Bonnet and Poppet Repair Kit for Febco's Model 765 EVB 1" and FVB 1-1/4" vacuum breakers and backflow preventers are manufactured from the highest quality materials and built to Upgraded OEM standards for a strong seal, long life and affordable price, please confirm your model #905-212 before placing your order.
• Repair kit Includes Includes bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, bolts, poppet and oil bag, Lead Free. No special tools required for repair, parts fit together freely.
• Easy Installation Installation is very easy, you can search for installation tutorials on YouTube, in most cases, no tools are required, hand tightening is all that is needed to install this Febco 765 1 Repair Kit 905-212 replacement into the system. In the rare event that you cannot tighten the FEBCO 765-1 Service Kit into the vacuum breaker, apply the supplied grease to the threads and the two pits on the outer ring of the bonnet part are suitable for a large wrench.
• 765-1 Repair kit instructions : The two pits on the outer ring of the bonnet parts are fittings for a large wrench; tighten with the proper tool, if necessary, and apply the supplied grease to the bonnet parts and the threads of the bronze valve. 765-1 for febco 765-1 repair kit.
• Attention Please note that 1 and 1-1/4 are not the outside diameters of the bonnet parts! 1 and 1-1/4 are the original FEBCO 765 valve model designations. The outside diameter of this bonnet part is approximately 2 for FEBCO 765 model 1 and 1-1/4 valves. This is a replacement part for the original Febco part number 905212 FRK 765-BP 1-1 1/4 bonnet poppet assembly.
• See more on Amazon...

Features

• Quality Assurance The main body of our 819T Trailer Gate spring latch Repair Kit is made of high quality iron, and all components are covered with black oxide film, which can effectively prevent Spring Latch from rusting greatly prolong its service life. The spring has large wire diameter, high rigidity and bearing capacity, which firmly locks the trailer door for you. In addition, the precise pin diameter and pin hole design can be perfectly compatible with your Carry-On utility trailer, no need to modify the tailgate eyelet.
• Specifications 1.Product composition: 1 L-shape retainer pin,1 spring and 1 Rollpin. 2.Single product size: pin diameter: 9/16 ,pin length: 5-1/4. 3.In order to prevent the stop pin from falling off during use, it is normal that the aperture on the L-shape retainer Pin is smaller than the diameter of the stop pin. During installation, you can use tools to knock the stop pin into the hole until it is tightly stuck in the right position you need.
• Compatible Models Latch repair kit 819T is compatible with 5XI0LGW2K,5X8SPW,5X8GW2K,5X8SP,5X10GW2K,4X8NG,5X8SPHS,4X6G,6X8GW13,6X8GW2KPT,5X10SSG,EX10GW,5.5X10GWPTLED,5XBGW,5X10GWHS,,6X14GW2BRK,6X12GWIBRK,6X12GWHS2BRK,6X166WHS2BRK etc various trailers of Carry-on. This is not all. You can press Control+F to find more models on our product details page.
• Installation Worry-free Accurate design ensures the convenience of installation. You only need to take down the old trailer gate latch, insert the L-shaped pin of our 819T Trailer Lift Gate Latches Replacement through the pin hole and spring, and fix it with the stop pin.
• Excellent Service We are full of confidence in the quality of 819T Trailer Gate Spring Latch Repair Kit. We have a professional team. Help you solve any problems that arise during use within three years.We will provide you with a satisfactory solution within 12 hours.
• See more on Amazon...

Features

• Specification Our upgraded 09951 water heater Element Socket has replaced the regular 09951 Element Socket. Suitable for Standard hex busy water heater elements, compatible with standard 1/2 inch socket drivers. Exceeding OEM standard specifications.It is a must-have item for families
• Easy to use The 09951 heater element socket has excellent compatibility, allowing you to easily disassemble the standard hexagonal sleeve components of a household water heater, making maintenance of the water heater an easy and efficient task, and is worth a place in your toolkit.
• [Easy to install] Our 09951 electric hot water heater element socket Universal type is suitable for everyone allows you to easily replace the components of the screw-in electric water heater. This tool will help to remove the components that cannot or are difficult to remove with a standard component wrench.
• [Product Advantage] We have our own professional electric water heater element socket manufacturing factory, which strictly inspects every product. It is made of high-quality heavy steel with fine workmanship, higher durability, better corrosion resistance and longer service life.
• [Assured after-sales service] Our 09951 element socket offers a one-year warranty. We are confident in the quality of our products, so you can buy them with confidence. If you encounter any problems during use or installation, please feel free to contact us. We will provide you with a satisfactory solution within 12 hours.
• See more on Amazon...

Features

• Product Advantage 571-VAC-CHK-A RV Vacuum Breaker Check Valve is designed high-quality materials, Spring with proper stiffness coefficient can bear the nominal pressure of about 8-125 PSI. The core of the ball valve is made of metal, which is not prone to breakage or other situations, and the rubber wrap on the outer layer can prevent the valve core from rusting and reduce the noise as much as possible. The precise design can make the valve core block all the countercurrent sewage and effectively protect the clean water.
• Specifications The parameters of this RV Vacuum Breaker Check Valve are as follows: 1. Nominal pressure (PN): 8-125 PSI 2. The inlet/outlet is designed by NPT Male, and the common diameter (DN) is 1/2 inch.
• Easy Installation 571-VAC-CHK-A RV Vacuum Breaker Check Valve is plug-and-play. Remove your old check valve,Confirm the installation direction: clean water should Flow in the direction of FLOW indicated by the arrow of the valve body, and then connect the check valve to the pipeline. Note:Installation position should be about 6 inches higher than the flusher and ensure vertical installation.Before installation, Cut off the water source and empty the residual water in the pipeline.
• Compatible Model The 571-VAC-CHK-A RV vacuum breaker check valves are compatible with Montana Mountaineer, Grand Design Reflection, Newmar, Coachman Leprechaun, Keystone: Passport/Outback,Forest River and other RV Blackwater cleaning systems. Note:Besides referring to the listed RV, the most important thing is to check whether the nominal diameter of the circuit breaker that your pipes are adapted to is 1/2 inch, which is the premise to ensure good adaptability.
• Excellent Service We are full of confidence in our RV Vacuum Breaker Check Valve 571-VAC-CHK-A, so you can choose it with confidence. If there are any problems in the whole use process, we will also provide you with a satisfactory solution within 12 hours.
• See more on Amazon...

Features

• Specifications Our toe alignment plates has replaced the ordinary toe alignment tool plates. Made of pure steel material, timeproof and wear-resistant, designed specifically for the technology and rules of tool alignment tool plates.
• Easy Installation Our toe calibration tool board is convenient and fast to use. Our front-end calibration tool TOE provides a convenient solution for calibrating your vehicle. No longer requires the use of complex devices or reliance on the help of others. Now, use our DIY front-end calibration tool! You can effortlessly fine tune the vehicle's toe angle, saving time and reducing setbacks during the process.
• Compatible Model Our toe alignment tool board has been specially designed to adapt to various bolt patterns, including the common SxS bolt patterns: 4 4.5 4 100 4 130 4 137 4 156 5 4.5 5 five 5.5 5 130 5 114 5 4.75 5 100 6 5. 5 6 6. 5 6 114. 3 6 139. 7 8 6. 5 8 170, etc. If your vehicle's bolt pattern matches any of the patterns listed above, these plates can effectively help adjust the toe in during wheel alignment.
• Product Advantage The tool alignment tool is made of pure steel, which is not easy to bend, deform, break, or rust. It can greatly save your time and the quality has far exceeded OEM's.
• 100% Problem Solving If you encounter any problems while using the tool alignment tool plates, including any issues with the product within 10 years, we will be 100% responsible, allowing you to purchase and use with peace of mind.
• See more on Amazon...

Features

• Specifications Our 603-832 Coolant Reservoir made of high-quality plastic,The tank body is thick enough,it can well withstand vibrations and bottom heat generated during machine use, thus effectively avoiding cracks. Our coolant reservoir tank is equipped with a cover, and in addition, we have upgraded the materials of three connection ports to make it more closely connected with the hose.
• Compatible Model 603-832 coolant reservoir can replace the model: 52014880AA, Compatible with Ram ProMaster 1500,2500 and 3500 (2014-2021).You can judge whether 603-832 is compatible with your car by checking the original model of coolant reservoir. For detailed compatible models, please refer to our details page.
• Easy Installation Our 603-832 Coolant Reservoir has three complete installation holes,the top of Coolant reservoir tank are equipped with covers,Maximum pressure level of the covers reaches 1.4bar, which can effectively avoid the overflow during driving. In addition, the joint between the tank and the car body is designed with metal gasket, which is convenient and firm to install and not easy to break. You only need to connect the mounting hole with the corresponding hose of the car body.
• Product Advantage High-quality material selection creates a strong and thick Coolant Reservoir. The connecting holes made of metal materials make it easy to install and not easy to break, and the precise design enables it to match your body properly. Say goodbye to problems such as leakage, fracture and unstable installation.
• Excellent Service We are full of confidence in the quality of 603-832 Coolant Reservoir. We have a professional team, Help you solve any problems that arise during use within two years,And we will provide you with a satisfactory solution within 12 hours.
• See more on Amazon...

Features

• Product Advantage 571-VAC-CHK-A RV Vacuum Breaker Check Valve is designed high-quality materials, Spring with proper stiffness coefficient can bear the nominal pressure of about 8-125 PSI. The core of the ball valve is made of metal, which is not prone to breakage or other situations, and the rubber wrap on the outer layer can prevent the valve core from rusting and reduce the noise as much as possible. The precise design can make the valve core block all the countercurrent sewage and effectively protect the clean water.
• Specifications The parameters of this RV Vacuum Breaker Check Valve are as follows: 1. Nominal pressure (PN): 8-125 PSI 2. The inlet/outlet is designed by NPT Male, and the common diameter (DN) is 1/2 inch.
• Easy Installation b&b Model 571 Check valve is plug-and-play. Remove your old check valve,Confirm the installation direction: clean water should Flow in the direction of FLOW indicated by the arrow of the valve body, and then connect the check valve to the pipeline. Note:Installation position should be about 6 inches higher than the flusher and ensure vertical installation.Before installation, Cut off the water source and empty the residual water in the pipeline.
• Compatible Model The 571-VAC-CHK-A RV vacuum breaker check valves are compatible with Montana Mountaineer, Grand Design Reflection, Newmar, Coachman Leprechaun, Keystone: Passport/Outback,Forest River and other RV Blackwater cleaning systems. Note:Besides referring to the listed RV, the most important thing is to check whether the nominal diameter of the circuit breaker that your pipes are adapted to is 1/2 inch, which is the premise to ensure good adaptability.
• Excellent Service We are full of confidence in our RV Vacuum Breaker Check Valve 571-VAC-CHK-A, so you can choose it with confidence. If there are any problems in the whole use process, we will also provide you with a satisfactory solution within 12 hours.
• See more on Amazon...

Features

• Specifications Our 0261230029 MAP sensor replaced ordinary Volvo 0261230029 sensor, made of brass screw ports and special materials for durability, long life and quality beyond OEM.
• Easy Installation Our 0261230029 map sensor installation is fast and convenient. When your car experiences an error and cannot function, it may be necessary to replace the 0261230029 map sensor. You can also search for 0261230029 online through TouTube to watch the installation and prevent it from becoming unusable.
• Compatible Model 0261230029 9125462 map sensor replacement: REPV315204 .Compatible with 2004 2003 2002 2001 2000 1999 Volvo C70 S40 S60 S70 S80 V40 V70 Automatic Transaxle FWD Coupe Convertible Sedan Wagon 5Cyl 4Cyl 6Cyl 2.3L 2.4L 1.9L 2.8L 2.9L Base LSE T5 2.4T AWD GLT GLT SE T6 R AWD X/C AWD X/C AWD SE X/C MAP Sensor ect . You can use CTRL+F to search for your car brand and see the specific model to prevent inconvenience caused by not being able to use it after purchase.
• See more on Amazon...

Features

• 1
• See more on Amazon...

Features

• Compatible Model Our 2024 Upgraded 905-212 Bonnet and Poppet Repair Kit for Febco's Model 765CBV 1/2" and 765DBV 3/4"vacuum breakers and backflow preventers are manufactured from the highest quality materials and built to Upgraded OEM standards for a strong seal, long life and affordable price, please confirm your model #905-211 before placing your order.
• Repair kit Includes Includes bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, bolts, poppet and oil bag, Lead Free. No special tools required for repair, parts fit together freely.
• Easy Installation Installation is very easy, you can search for installation tutorials on YouTube, in most cases, no tools are required, hand tightening is all that is needed to install this febco 1/2-3/4 backflow preventer into the system. In the rare event that you cannot tighten the febco 765 3/4 repair kit into the vacuum breaker, apply the supplied grease to the threads and the two pits on the outer ring of the bonnet part are suitable for a large wrench.
• Febco 765 1/2 - 3/4 Poppet/bonnet Assembly : The two pits on the outer ring of the bonnet parts are fittings for a large wrench; tighten with the proper tool, if necessary, and apply the supplied grease to the bonnet parts and the threads of the bronze valve.
• 100% Problem Solving If you encounter any problems while replacing the 905-211 bonnet and poppet assembly repair kit, including any issues with the product within 3 year, we will be 100% responsible, so you can purchase with confidence and use it with peace of mind.
• See more on Amazon...