Best intake manifolds - Buying Guide
Last Updated: 04/23/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Intake Boot Carburetor Replacement for Yamaha Bear Tracker 250 YFM250 1999-2004 Replace 4XE-13586-00-00
Asin: B07HMG3B2N | Ean: 6971216077787
Package - 1X Intake Boot, 1X Free O-Ring, 1X Free Clamp, 2X Free Bolts.
Service - If You Have Any Questions, Kindly Contact Us And We Will Be Able To Help You Out.
Pre-Checks - Please Compare Your Product With The Pictures And Make Sure This Part Fit Your Atv Utv Motorcycle Before You Purchase.
Compatiblity - Replaces Part Number: 4Xe-13586-00-00, 93210-35537-00, 91317-06020-00, 90450-49001-00.
Features
- Fitment - Replacement for Yamaha Bear Tracker 250 YFM250 1999-2004
- Compatiblity - Replaces Part Number: 4XE-13586-00-00, 93210-35537-00, 91317-06020-00, 90450-49001-00
- Package - 1x Intake Boot, 1x Free O-Ring, 1x Free Clamp, 2x Free Bolts
- Pre-Checks - Please compare your product with the pictures and make sure this part fit your ATV UTV motorcycle before you purchase
- Service - If you have any questions, kindly contact us and we will be able to help you out
- See more on Amazon...
Brand: labwork | Manufacturer: Does not apply
See On Amazon #2
Rubber Airbox & intake manifold boot For Arctic Cat 250 300 1998-2005 3402-533 0470-347
Asin: B09Z2G2LRH | Model: 3402-533 | PartNumber: 3402-533 | Ean: 0780279725377 | UPC: 780279725377
Package: 1 X Carburetor Intake Manifold Boot, 1 X Gasket.
After-Sales Service: If You Have Any Questions About Our Products During The Use And Purchase Process, You Can Contact Us By Email At Any Time, We Will Try Our Best To Solve The Problem For You, And We Will Provide Comprehensive Quality Assurance For Our Products..
Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
Oem Part Number: 3402-533，0470-347.
Features
- Compatible Models: For Arctic Cat 250 2x4 Arctic Cat 300 1999-2005.
- OEM Part Number: 3402-533 0470-347
- Package: 1 x Carburetor Intake Manifold Boot, 1 x Gasket
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon #3
Carburetor Intake Boot, 3HN-13586-01-00 Carburetor Intake Manifold Boot for Yamaha Big Bear 350 1987-1998, Kodiak 400 1993-1998, Moto 4 YFM350ER 1987-1995
Asin: B09NDSCQDQ
Optimal Performance: The New Intake Manifold Interface Can Solve Problems Such As High Idle Speed, Weak Acceleration And Easy Flameout During Acceleratio. Sensitive Start To Optimize Engine Performance, Can Directly Replace The Old One..
Professional Design: With Professional Manufacturing, High Precision, Good Sealing , Carburetor Intake Manifold Boot Can Replace Your Old Cracked And Broken Intake Boot. Perfectly Connects The Carburetor And The Engine, Provides New Power For Better Operation..
High Quality Material: The Carburetor Intake Manifold Boot Is Made By High Quality Rubber Material, High Strength, Corrosion Resistance, Not Easy To Break, More Durable..
Oem Number: According To The Original Factory Specifications, Replacing Reference Oem Number Is 3Hn-13586-01-00, 3Hn-13586-02-00 And The Standard Design Ensures Perfect Matching..
Features
- Compability: Carburetor intake manifold boot fits for Yamaha Big Bear 350 1987-1998, Kodiak 400 1993-1998, Moto 4 YFM350ER 1987-1995.
- OEM Number: According to the original factory specifications, replacing reference OEM number is 3HN-13586-01-00, 3HN-13586-02-00 and the standard design ensures perfect matching.
- Optimal Performance: The new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. Sensitive start to optimize engine performance, can directly replace the old one.
- High Quality Material: The carburetor intake manifold boot is made by high quality rubber material, high strength, corrosion resistance, not easy to break, more durable.
- Professional Design: With professional manufacturing, high precision, good sealing , carburetor intake manifold boot can replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation.
- See more on Amazon...
Brand: Yuecoom
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #4
FVRITO Performance Racing Intake Pipe Inlet Manifold for Compatible With Predator 212ccc ct200u GX160 GX200 6.5HP OHV Chinese 196cc clone Engines Mini Bike Go Kart Black
Asin: B0927LLBH2 | Ean: 9414056404742
Please Check For The Details And Size To Make Sure This Part Will Fit..
Cnc Aluminum Material Black.
Attention: You Will Need A Mikuni Vm22 Carburetor Or Other Flanged Carburetors To Match This Manifold; And This Is Mainly Intended For Use On Mini Bikes, It Can Be Used On Go Karts With Modifications To The Throttle Cable..
Package Include:1 Pcs Wrench,1 Pcs Mainfold,1 Set Gaskets,1 Set Mounting Screws.
Features
- Compatible With Hond* GX160 GX200 6.5HP OHV Predator 212cc Chinese 196cc clone Engines ct200u Mini Bike Go Kart
- Package Include:1 pcs wrench,1 pcs Mainfold,1 Set Gaskets,1 set Mounting Screws
- please check for the details and size to make sure this part will fit.
- Attention: You Will Need A Mikuni VM22 Carburetor Or Other Flanged Carburetors To Match This Manifold; And This Is Mainly Intended for Use On Mini Bikes, It Can Be Used On Go Karts With Modifications To The Throttle Cable.
- CNC Aluminum Material Black
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
See On Amazon #5
Carburetor fit for Yamaha Breeze 125 1989-2004 Grizzly 125 YFM125 YFM125G Carb 2004-2013 with Intake Manifold Boot/Fuel Valve Petcock Switch
Asin: B09QMQMY6T | Model: Breeze 125 | PartNumber: Breeze 125 | Ean: 0768432231927 | UPC: 768432231927
Fuel Valve Petcock Switch Fits For Yamaha Breeze 125 Yfa1(1989-2004).
Warranty: If You Find That The Product Does Not Fit Your Models Or The Product Quality Is Defective After Purchase, You Can Apply For Replacement Or Refund.
Package Including:1X Carburetor 1Xintake Manifold Boot 1Xfuel Petcock Switch Valve As Picture Show.
Intake Manifold Boot Fits For Yamaha Breeze 125 Yfa1(1989-2004),Grizzly 125 Yfm125g(2004-2013).
Features
- Fit for Yamaha Breeze 125 YFA1(1989-2004),Fit for Yamaha Grizzly 125 YFM125G(2004-2013),Fit for Yamaha Moto 4 YFM225(1986-1988),Fit for Yamaha Timberwolf YFB250(1992-1998),Fit for Yamaha YFB250FW 4x4(1994-2000)
- Intake Manifold Boot Fits for Yamaha Breeze 125 YFA1(1989-2004),Grizzly 125 YFM125G(2004-2013)
- Fuel Valve Petcock Switch Fits for Yamaha Breeze 125 YFA1(1989-2004)
- Package including:1x Carburetor 1xIntake Manifold Boot 1xFuel Petcock Switch Valve as Picture Show
- WARRANTY: If you find that the product does not fit your models or the product quality is defective after purchase, you can apply for replacement or refund
- See more on Amazon...
Brand: DABAZUALY | Manufacturer: DABAZUALY
Warranty: 90 days from date of purchase
See On Amazon #6
MOTO1988 Intake Manifold Boots For HONDA Shadow VLX 600 VT600 C CD 1988-1998 Shadow Spirit 750 VT750DC 2001-2007 Shadow ACE 750 VT750C 1998-2003 16211-MAW-600 Carburetor Carb
Asin: B0BKLGFY9J | Model: 16211-MAW-600 | PartNumber: 16211-MAW-600 | Ean: 0723497433099 | UPC: 723497433099
Package: Intake Manifold Boots*2.
After-Sales Service: If You Have Any Questions About Our Products During The Use And Purchase Process, You Can Contact Us By Email At Any Time, We Will Try Our Best To Solve The Problem For You, And We Will Provide Comprehensive Quality Assurance For Our Products..
Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
Manufacturer Part: 16211-Maw-600.
Features
- Compatible Models: For Honda Shadow ACE 750 VT750 1998-2003 Shadow Spirit 750 VT750D 2001-2007 Shadow VLX 600 VT600 1988-1989 1991-1998 Transalp 600 XL600 1989-1990.
- Manufacturer Part: 16211-MAW-600
- Package: Intake Manifold Boots*2
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
Warranty: 90 Days
See On Amazon #7
MOTO1988 Carburetor Intake Manifold Boot Compatible with Honda Foreman 450 TRX450 Rancher 350 TRX350 TE TM FE FM FourTrax Foreman 400 TRX400 1995-2006 16211-HM7-003 16210-HN5-671
Asin: B09FP23SNV | Ean: 0795234627603 | UPC: 795234627603
☺Function And Material: Our Carburetor Intake Manifold Cover Can Perfectly Replace The Old Or Damaged Manifold Cover. The Replacement Of A New Intake Manifold Interface Can Solve The Problems Of High Idling Speed, Weak Acceleration, And Easy Flameout During Acceleration. Made Of High-Quality Rubber, It Is Resistant To High Temperature And High Pressure, Has A Long Service Life, And Is Easy To Install..
☺After-Sales Service: If You Have Any Questions About Our Products During The Use And Purchase Process, You Can Contact Us By Email At Any Time, We Will Try Our Best To Solve The Problem For You, And We Will Provide Comprehensive Quality Assurance For Our Products..
☺Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
☺Oem And Package: Oem Part Number: 16211-Hm7-003; 16210-Hn5-671; 16210-Hn0-A01. If You Buy Them You Will Get The 1 X Carburetor Intake Manifold Boot For Honda..
Features
- Compatible models Intake Manifold Carburetor Carb Boots Set Apply to 1995-1996 Honda FourTrax Foreman 400 TRX400FW 4x4; 1997-2003 Honda Foreman 400 TRX400FW 4x4; 2000-2006 Honda Rancher 350 TRX350FE 4x4 ES; 2000-2006 Honda Rancher 350 TRX350FM 4x4 S; 2000-2006 Honda Rancher 350 TRX350TE 2x4 ES; 2000-2006 Honda Rancher 350 TRX350TM 2x4 S and TRX350TM 2x4; 1998-2001 Honda Foreman 450 TRX450ES 4x4 ES & TRX450S 4x4 S; 2002-2004 Honda Foreman 450 TRX450FE 4x4 ES & TRX450FM 4x4 S.
- OEM and Package: OEM Part Number: 16211-HM7-003; 16210-HN5-671; 16210-HN0-A01. If you buy them you will get the 1 x Carburetor Intake Manifold Boot for Honda.
- Function and material: Our carburetor intake manifold cover can perfectly replace the old or damaged manifold cover. The replacement of a new intake manifold interface can solve the problems of high idling speed, weak acceleration, and easy flameout during acceleration. Made of high-quality rubber, it is resistant to high temperature and high pressure, has a long service life, and is easy to install.
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon #8
Air Intake Inlet duct Tube Boot For Kawasaki 1988-2002 Bayou 220 KLF 220 2003-2011 Bayou 250 KLF 250 ATV 14073-1312
Asin: B09JNXKF1B | Model: 14073-1312 | PartNumber: 14073-1312 | Ean: 0780279983975 | UPC: 780279983975
High Quality: The Main Body Of Our Carburetor Intake Manifold Boot Is Made Of High-Density Rubber Material, Which Has The Advantages Of Corrosion Resistance, High Temperature Resistance, Friction Resistance, Longer Service Life, And Longer Service Life..
After-Sales Service: If You Have Any Questions About Our Products During The Use And Purchase Process, You Can Contact Us By Email At Any Time, We Will Try Our Best To Solve The Problem For You, And We Will Provide Comprehensive Quality Assurance For Our Products..
Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
Oem Part Number And Package: Carburetor Ducts’ Oem Part Number Is 14073-1312; If You Order Our Air Intake Inlet Duct Tube Boot For Kawasaki Atv Bayou 220 250, You Will Receive The Following: 1 X Carburetor Intake Manifold Boot ..
Features
- Compatible Models: Kawasaki Bayou 220 1988-2002 Bayou 250 2003-2011.
- OEM Part Number and Package: Carburetor ducts OEM part number is 14073-1312; If you order our Air Intake Inlet duct Tube Boot for Kawasaki ATV Bayou 220 250, you will receive the following: 1 x Carburetor Intake Manifold Boot .
- High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life.
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon #9
CICMOD Intake Manifold Carburetor Boot Joints for Yamaha Grizzly Yfm 600 1998 1999 2000 2001
Asin: B07DC3WT6L | Model: CP4112 | PartNumber: CP4112 | Ean: 8575675667961
This Carburetor Intake Manifold Boot Is Made Of Premium Material, Sturdy And Resistant, Good Sealing Performance.
Package Included: 1 X Intake Manifold Boot; 1 X Hose Clamp.
Easy To Install: Direct Replace The Old Or Broken One.
Fits On O.E.M And Aftermarket Carburetors. Part Number: 4Wv-13596-00-00, 4Wv135960000, 4Wv-13596-00, 4Wv1359600, 4Wv1359600.
Features
- Fitment: Fits for Yamaha Grizzly YFM 600 Models, Year: 1998 1999 2000 2001
- Fits on O.E.M and Aftermarket Carburetors. Part Number: 4WV-13596-00-00, 4WV135960000, 4WV-13596-00, 4WV1359600, 4WV1359600
- This carburetor intake manifold boot is made of premium material, sturdy and resistant, good sealing performance
- Easy to Install: Direct replace the old or broken one
- Package included: 1 x Intake Manifold Boot; 1 x Hose Clamp
- See more on Amazon...
Brand: CICMOD | Manufacturer: CICMOD
See On Amazon #10
Intake Manifold Boot Intake Reed Valve & Gasket for Polaris Predator 50 90 2003-2006 Sportsman 90 2001-2006 Scrambler 50 90 2001-2003 0450065 0450063 0450062
Asin: B09JSB99W5 | Ean: 0780279984101 | UPC: 780279984101
100% Brand New And High Quality: Our Motorcycle Intake Plate & Gasket Are Made Of Sturdy And Durable High-Quality Material, Resistant To Abrasion And High Temperature, And Has Passed Strict Quality Inspections. It Has A Long Use Time And Is Perfectly Fitted To The Applicable Vehicle Without Damaging The Vehicle. The Internal Parts Are Safer And More Worry-Free To Use..
After-Sales Service Guarantee: If The Product You Receive Is Defective Or Damaged And Cannot Be Used, You Can Contact Us At Any Time. We Will Try Our Best To Solve It For You. We Are Committed To Providing Customers With The Highest Quality Products And Services As Our Goal..
Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
Oem And Package: Oem Part Number Are 0450065 , 0450063 , 0450062. If You Order Our Intake Manifold & Reed Valve For Polaris Atv Predator 50 90, You Will Receive The Following: 1 X Intake Manifold, 1 X Reed Valve, 2 X Reed Valve Gasket..
Features
- Compatible Models: Intake Manifold & Reed Valve compatible with Polaris Sportsman 90 2001-2006; Polaris Scrambler 50 2001-2003; Polaris Scrambler 90 2001-2003; Polaris Predator 50 2003-2006; Polaris Predator 90 2003-2006.
- OEM and Package: OEM Part Number are 0450065 , 0450063 , 0450062. If you order our Intake Manifold & Reed Valve For Polaris ATV Predator 50 90, you will receive the following: 1 x Intake Manifold, 1 x Reed Valve, 2 x Reed Valve Gasket.
- 100% Brand New and High Quality: Our Motorcycle Intake Plate & Gasket are made of sturdy and durable high-quality material, resistant to abrasion and high temperature, and has passed strict quality inspections. It has a long use time and is perfectly fitted to the applicable vehicle without damaging the vehicle. The internal parts are safer and more worry-free to use.
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon #11
partszen Carburetor Intake Manifold Boot for Yamaha for Warrior 350 YFM350X 1987-2004, for Wolverine 350 YFM350FX 1995 ATV, Replacement for 1UY-13586-01-00, 1UY-13586-02-00
Asin: B09MTG11MQ | Ean: 0710359138650 | UPC: 710359138650
Fitment For: For Yamaha Wolverine 350 Yfm350fx 4X4 1995.
Wish This High-Quality Aftermarket Product Kit Would Bring You A Good Experience. If There Is Any Problem, Please Feel Free To Contact Us..
Package Includes: 1 Carburetor Intake Manifold, 1 Gasket, 2 Bolts, 2 Carburetor O-Ring, 4 Washers; You Will Get As Pictured..
Compatible With: For Yamaha Warrior 350 Yfm350x 1987-2004.
Features
- Replaces part number: For 1UY-13586-01-00, 1UY-13586-02-00 Carburetor Intake Manifold
- Compatible with: For Yamaha Warrior 350 YFM350X 1987-2004
- Fitment for: For Yamaha Wolverine 350 YFM350FX 4x4 1995
- Package Includes: 1 Carburetor Intake Manifold, 1 Gasket, 2 Bolts, 2 Carburetor O-Ring, 4 Washers; You will get as pictured.
- Wish this high-quality aftermarket product kit would bring you a good experience. If there is any problem, please feel free to contact us.
- See more on Amazon...
Brand: partszen | Manufacturer: partszen
See On Amazon #12
MOTO1988 Carburetor Joint Intake Manifold Boot For Yamaha Road Star 1600 XV1600 1999-2003 4WM-13586-01-00
Asin: B09GB3PL7N | Ean: 0780279983746 | UPC: 780279983746
❀Oem Part Number: Applicable Oem Numbers Are 4Wm-13586-01-00 And 93210-505A4-00. If You Buy Them You Will Get The 1 * Genuine Carburetor Intake Manifold Boot And 2 * O-Rings..
❀After-Sales Service: If You Have Any Questions About Our Products During The Use And Purchase Process, You Can Contact Us By Email At Any Time, We Will Try Our Best To Solve The Problem For You, And We Will Provide Comprehensive Quality Assurance For Our Products..
❀Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
❀Compatible Models: New Genuine Carburetor Intake Manifold Boot Compatible With 1999-2003 Yamaha Road Star Xv1600a; 1999-2003 Yamaha Road Star Xv1600at Silverado; 2003 Yamaha Road Star Xv1600ale Limited Edition; 2003 Yamaha Road Star Xv1600as Midnight; 2003 Yamaha Road Star Xv1600atle Silverado Limited Edition; 2002 Yamaha Road Star Xv1600as Midnight Star..
Features
- Item Condition: 100% brand new and high quality, All items we sell are in new and in original packaging. They have never been mounted or used in anyway. Guaranteed to be in perfect condition.
- Compatible Models: New genuine carburetor intake manifold boot compatible with 1999-2003 Yamaha Road Star XV1600A; 1999-2003 Yamaha Road Star XV1600AT Silverado; 2003 Yamaha Road Star XV1600ALE Limited Edition; 2003 Yamaha Road Star XV1600AS Midnight; 2003 Yamaha Road Star XV1600ATLE Silverado Limited Edition; 2002 Yamaha Road Star XV1600AS Midnight Star.
- OEM Part Number: Applicable OEM numbers are 4WM-13586-01-00 and 93210-505A4-00. If you buy them you will get the 1 * Genuine Carburetor Intake Manifold Boot and 2 * O-Rings.
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon #13
ORAEVY Racing Intake Pipe Mainfold Compatible With Predator 212cc Honda GX160 GX200 CT200U 6.5HP OHV 196cc KT196 Clones Moto Go Kart Mini Bike Race Kart (Red)
Asin: B09C5XWZJ5 | Model: ORAEVY | PartNumber: ORAEVY | Ean: 0616430434362 | UPC: 616430434362
Processing Technology: Cnc Machining Process ,Stable Machining Quality, High Machining Accuracy,100% Brand New..
Please Check For The Details And Size To Make Sure This Part Will Fit. Attention: You Will Need A Mikuni Vm22 Carburetor Or Other Flanged Carburetors To Match This Manifold; And This Is Mainly Intended For Use On Mini Bikes, It Can Be Used On Go Karts With Modifications To The Throttle Cable..
Package Include:2 Pcs Wrench,1 Pcs Intake Mainfold,1 Set Gaskets,1 Set Mounting Screws.
Material：6061-T6 Aluminum Alloy， Corrosion-Resistant Alloy, High Hardness (Up To Hv90 Degrees), Good Oxidation Effect. There Are No Trachoma Pores, And The Flatness Is Better..
Features
- Perfect match:Compatible With Honda GX160 GX200 6.5HP OHV Predator 212cc Engine Chinese 196cc Clones CT200U Mini Bike Race Go Kart
- Material 6061-T6 Aluminum Alloy corrosion-resistant alloy, high hardness (up to HV90 degrees), good oxidation effect. There are no trachoma pores, and the flatness is better.
- Processing technology: CNC machining process ,stable machining quality, high machining accuracy,100% Brand New.
- Package Include:2 pcs wrench,1 pcs Intake Mainfold,1 Set Gaskets,1 set Mounting Screws
- please check for the details and size to make sure this part will fit. Attention: You Will Need A Mikuni VM22 Carburetor Or Other Flanged Carburetors To Match This Manifold; And This Is Mainly Intended for Use On Mini Bikes, It Can Be Used On Go Karts With Modifications To The Throttle Cable.
- See more on Amazon...
Brand: ORAEVY | Manufacturer: ORAEVY
See On Amazon #14
NIBBI Motorcycle Carburetor Intake Manifold,Interface Glue Intake Manifold Rubber, 33mm Carb Manifold Spare Part For Dirt Bike ATV Go Kart Motorcross (33mm)
Asin: B0BLRQM4XQ | Model: Nibbi-124 | PartNumber: Nibbi-124
3.33Mm(Inside Diameter) X 35Mm(Height) ,Fit For Pwk24/26/28,Pe24/26/28/30 Carburetor Etc..
5.If You Have Any Questions About The Installation, Or Dissatisfied With The Quality Of The Product Please Contact Us..
4.Come With Two Adjustable Stainless Steel Clips,Ensure That The Engine And Carburetor Connection Is Not Loose And Does Not Leak..
2.This Is The Connection Rubber Between The Engine And The Carburetor..
Features
- 1.High quality silicone,high temperature resistance, no cracking.
- 2.This is the connection rubber between the engine and the carburetor.
- 3.33mm(inside diameter) x 35mm(height) ,fit for PWK24/26/28,PE24/26/28/30 Carburetor etc.
- 4.Come with two adjustable Stainless steel clips,Ensure that the engine and carburetor connection is not loose and does not leak.
- 5.If you have any questions about the installation, or dissatisfied with the quality of the product please contact us.
- See more on Amazon...
Brand: nibbi | Manufacturer: nibbi intake manifold
Warranty: 360 days
See On Amazon #15
Boyesen 673 Power Reed, Black
Asin: B006B2VEIS | Model: 673 | PartNumber: 673 | Ean: 0182682529939, 0804429003778 | UPC: 804429003778, 182682529939
The Top Reed Is Lightweight And Resilient For Crisp Throttle Response At Partial Throttle Or Low Rpms; The Stiffer, Bottom Reed Is Ported To Provide Maximum Flow And Horsepower At Higher Rpms.
Minor Change Gives Major Horsepower Improvements And Fuel Economy.
Fit Type: Vehicle Specific.
Longer Overall Life: Boyesen Power Reeds Outlast All Other Aftermarket Reed Petals.
Power Reeds Use A Patented Dual Stage Fiberglass Design For More Air Flow, More Air Velocity And More Power.
Features
- For: Yamaha PW80 all models
- Power reeds use a patented dual stage fiberglass design for more air flow, more air velocity and more power
- The top reed is lightweight and resilient for crisp throttle response at partial throttle or low RPMs; the stiffer, bottom reed is ported to provide maximum flow and horsepower at higher RPMs
- Longer overall life: Boyesen power reeds outlast all other aftermarket reed petals
- Minor change gives major horsepower improvements and fuel economy
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: Boyesen | Manufacturer: Boyesen
Dimensions: 5.00 x 10.00 x 5.00 inches
Warranty: Manufacturer Warranty
See On Amazon #16
Racing Performance Intake Pipe Inlet Manifold Black For Coleman Powersports CT200U BT200X CT200u-ex,212cc 196cc/6.5HP Go Kart and Gas Mini Bike,For Honda GX160 GX200
Asin: B0BZBZG9G4 | Model: AMFQY_MK0266 | PartNumber: AMFQY_MK0266 | Ean: 0730704598274 | UPC: 730704598274
Package Include: 1Pc Mainfold + 1Pc Gasket + 1Set Mounting Screws.
You Will Need A Vm22 Carburetor Or Other Flanged Carburetors To Match This Manifold; And This Is Mainly Intended For Use On Mini Bikes, It Can Be Used On Go Karts With Modifications To The Throttle Cable..
Replacement For Coleman Bt200x, Ct200u, Ct200u-Ex,196Cc6.5Hp Gas Mini Bike,For Honda Gx160 Gx200.
Features
- Fitment: Racing Performance Intake Pipe Inlet Manifold For Predator 212cc GX200 6.5HP Chinese OHV Engines 196cc Clone Engines Mini Bike Go Kart
- Replacement for Coleman BT200X, CT200U, CT200U-EX,196cc6.5HP Gas mini bike,For Honda GX160 GX200
- Package Include: 1pc Mainfold + 1pc Gasket + 1set Mounting Screws
- You Will Need A VM22 Carburetor Or Other Flanged Carburetors To Match This Manifold; And This Is Mainly Intended For Use On Mini Bikes, It Can Be Used On Go Karts With Modifications To The Throttle Cable.
- See more on Amazon...
Brand: SJVLXHI | Manufacturer: yuecang
Warranty: no warranty
See On Amazon #17
MOTO1988 Intake Manifold Boot for Polaris RZR XP 1000 RS1 RZR XP 4 1000 2014-2020 1205302 1204714
Asin: B09WMSYHGW | Ean: 0780279724837 | UPC: 780279724837
Package: 1 X Carburetor Intake Manifold Boot.
After-Sales Service: If You Have Any Questions About Our Products During The Use And Purchase Process, You Can Contact Us By Email At Any Time, We Will Try Our Best To Solve The Problem For You, And We Will Provide Comprehensive Quality Assurance For Our Products..
Tips Before Purchase: Please Carefully Check Whether Your Model Is Applicable To Our Products Before Buying. You Can Refer To The Applicable Models, Pictures And Oem Numbers On Our Page To Help You Determine Your Choice..
Oem Part Number: 1205302, 1204714.
Features
- Compatible Models: For Polaris RZR XP 1000/RZR XP 4 1000 2016-2019 RZR RS1 2018-2019.
- OEM Part Number: 1205302, 1204714
- Package: 1 x Carburetor Intake Manifold Boot
- Tips before Purchase: Please carefully check whether your model is applicable to our products before buying. You can refer to the applicable models, pictures and OEM numbers on our page to help you determine your choice.
- After-Sales Service: If you have any questions about our products during the use and purchase process, you can contact us by email at any time, we will try our best to solve the problem for you, and we will provide comprehensive quality assurance for our products.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon #18
SIKUAI Motorcycle Intake Manifold Carburetor Boot 1UY-13586-01-00 1UY-13586-02-00 Accessaries for Yamaha Wolverine 350 YFM350FX 4x4 1995, for Yamaha Warrior 350 YFM350X 1987-2004
Asin: B0D1N9QZ2X
Give Your Machine The New Power And Torque It Really Deserves.
Package List: 1 X Cnc 6061-T6 Aluminum Intake Manifold Carburetor Boot, 2 X Bolts, 4 X Washers, 1 X Custom Made 3Mm Thick Gasket. Please Check It Befor Carefully To Make Sure It Is What You Need..
Material: Made Of Premium Metal And Plastic Material, Good Sealing Performance And Oil Resistant.
Replaces Number: 1Uy-13586-01-00 1Uy-13586-02-00.
Features
- Compatibility: Motorcycle Carburetor Intake Manifold Boot for Yamaha Wolverine 350 YFM350FX 4x4 1995, for Yamaha Warrior 350 YFM350X 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004
- Replaces number: 1UY-13586-01-00 1UY-13586-02-00
- Give your machine the new power and torque it really deserves
- Material: Made of premium metal and plastic material, good sealing performance and oil resistant
- Package list: 1 x CNC 6061-T6 Aluminum Intake Manifold Carburetor Boot, 2 x Bolts, 4 x Washers, 1 x Custom Made 3mm Thick Gasket. please check it befor carefully to make sure it is what you need.
- See more on Amazon...
Brand: generic | Manufacturer: SIKUAI
Dimensions: 0.35 x 0.49 x 0.35 inches | Weight: 0.62 pounds
See On Amazon #19
Lirun Rubber Carburetor Carb Intake Manifold Boot Mounting Black For Yamaha ATV Big Bear 400 00-12
Asin: B0D2CLHJLF
Good Function: Select Premium Rubber For Stable Construction, Not Easy To Crack; Replace The Old Broken One To Ensure The Best Performance.
Package Included: 1 Pc Intake Manifold Boot.
Simple To Replace: Installation Is A Breeze, Save Time And Effortlessly.
High Quality Material: The Intake Manifold Boot Is Made From Rubber, Duration Of Wearing, Lightweight, Rust Resistant And Corrosion Resistant.
Features
- Fitment: The intake manifold boot is For Yamaha ATV Big Bear 400 2000-2012
- High Quality Material: The intake manifold boot is made from rubber, duration of wearing, lightweight, rust resistant and corrosion resistant
- Good Function: Select premium rubber for stable construction, not easy to crack; Replace the old broken one to ensure the best performance
- Simple to replace: Installation is a breeze, save time and effortlessly
- Package Included: 1 Pc Intake Manifold Boot
- See more on Amazon...
Brand: Three T | Manufacturer: Three T
Dimensions: 0.28 x 0.47 x 0.43 inches | Weight: 0.57 pounds
See On Amazon #20
MOTOALL Carburetor Intake Manifold Boot 1UY-13586-01-00,1UY-13586-02-00 CNC Aluminum Fit for Yamaha Warrior 350 1987-2004, for Yamaha Wolverine 350 YFM350FX 1995 ATV
Asin: B0D14FT2B8
Premium Quality: Made Of Quality Cnc Aluminum, Is Anti-Corrosion And Long Service Life..
Package Included: 1 X Cnc 6061-T6 Aluminum Intake Manifold, 1 X Custom Made 3Mm Thick Gasket, 2 X Bolts, 4 X Washers..
Perfect Fitment: Adopt Oem Design And Manufacturing, Fit For The Original Parts Perfectly..
Fitment: Fit For Yamaha Warrior 350 Yfm350x 1987-2004, For Yamaha Wolverine 350 Yfm350fx 4X4 1995 Atv..
Features
- OE/OEM Replace Part Number: 1UY-13586-01-00,1UY-13586-02-00.
- Fitment: Fit for Yamaha Warrior 350 YFM350X 1987-2004, for Yamaha Wolverine 350 YFM350FX 4x4 1995 ATV.
- Premium Quality: Made of quality CNC Aluminum, is Anti-corrosion and long service life.
- Perfect Fitment: Adopt OEM design and manufacturing, fit for the original parts perfectly.
- Package Included: 1 x CNC 6061-T6 Aluminum Intake Manifold, 1 x Custom Made 3mm Thick Gasket, 2 x Bolts, 4 x Washers.
- See more on Amazon...
Brand: MOTOALL | Manufacturer: MOTOALL
See On Amazon #21
MOTOALL Intake Manifold Carburetor Boot Carb 0570-084 Fit for Arctic Cat 400 4x4 TRV DVX Automatic 2005-2014
Asin: B0CZHLHX17
Quality Upgrade: Adopt Strict Manufacturing Process, Meet The Professional Specification For Stable And Durable Performance..
Package Included: 1 X Intake Manifold Carburetor Boot..
Tips Before Purchasing: Please Confirm The Part Fit For Your Vehicle Before Purchasing, Such As The Applicable Models, Pictures And Oem Numbers..
Fitment Models: Fit For Arctic Cat 400 4X4 2005-2014, For Arctic Cat 400 4X4 Trv Automatic 2006-2010, For Arctic Cat Atv 2009-2004 400 Trv..
Features
- Interchange Part Number: 0570-084.
- Fitment Models: Fit for Arctic Cat 400 4x4 2005-2014, for Arctic Cat 400 4x4 TRV Automatic 2006-2010, for Arctic Cat ATV 2009-2004 400 TRV.
- Quality Upgrade: Adopt strict manufacturing process, meet the professional specification for stable and durable performance.
- Tips Before Purchasing: Please confirm the part fit for your vehicle before purchasing, such as the applicable models, pictures and OEM numbers.
- Package Included: 1 x Intake Manifold Carburetor Boot.
- See more on Amazon...
Brand: MOTOALL | Manufacturer: MOTOALL
See On Amazon #22
Liru Intake Carburetor Manifold Mounting Boot Carb Black Rubber for Honda XL250R 84-87
Asin: B0D29719LV
Fantastic Function: Select Premium Rubber For Stable Construction, Not Easy To Crack; Replace The Old Broken One To Ensure The Best Performance.
Package Included: 1 Pc Intake Manifold.
Easy To Install: Installation Is A Breeze, Save Time And Effortlessly.
Excellent Material: The Intake Manifold Boot Is Made From Rubber, Duration Of Wearing, Lightweight, Rust Resistant And Corrosion Resistant.
Features
- Fitment: The intake manifold boot is For Honda XL250R 1984-1987
- Excellent Material: The intake manifold boot is made from rubber, duration of wearing, lightweight, rust resistant and corrosion resistant
- Fantastic Function: Select premium rubber for stable construction, not easy to crack; Replace the old broken one to ensure the best performance
- Easy to install: Installation is a breeze, save time and effortlessly
- Package Included: 1 Pc Intake Manifold
- See more on Amazon...
Brand: GZYF | Manufacturer: GZYF
Dimensions: 0.24 x 0.59 x 0.35 inches | Weight: 0.51 pounds
See On Amazon #23
PHINDICE Intake Carburetor Manifold Mounting Boot Carb Black Rubber For Suzuki LT-F250T/LT-F250/LT-F250F/LT-4WD Quadrunner 250
Asin: B0D2979CRF
Good Function: Select Premium Rubber For Stable Construction, Not Easy To Crack; Replace The Old Broken One To Ensure The Best Performance.
Package Included: 1 Pc Carburetor Intake Manifold Boot.
Easy Installation: Installation Is A Breeze, Save Time And Effortlessly.
Premium Quality: The Intake Manifold Boot Is Made From Rubber, Duration Of Wearing, Lightweight, Rust Resistant And Corrosion Resistant.
Features
- Compatibility Model: The intake manifold boot is For Suzuki LT-F250T Quadrunner 250 1988-1996(Only for Model L & M & N & P & R); For Suzuki LT-F250 Quadrunner 250 2WD 1999-2000(Only for Model X); For Suzuki LT-F250F Quadrunner 250 4WD 1999-2002(Only for Model X); For Suzuki LT-F250 Quadrunner 250 2000(Only for Model X); For Suzuki LT-4WD Kingquad 250 1996-1997(Only for Model T); For Suzuki LT-4WD Quadrunner 250 (Only for Model T) 1996-1998
- Premium Quality: The intake manifold boot is made from rubber, duration of wearing, lightweight, rust resistant and corrosion resistant
- Good Function: Select premium rubber for stable construction, not easy to crack; Replace the old broken one to ensure the best performance
- Easy Installation: Installation is a breeze, save time and effortlessly
- Package Included: 1 Pc Carburetor Intake Manifold Boot
- See more on Amazon...
Brand: generic | Manufacturer: PHINDICE
Dimensions: 0.35 x 0.51 x 0.43 inches | Weight: 0.42 Pounds
See On Amazon #24
PHINDICE Intake Carburetor Manifold Mounting Boot Carb Black Rubber For Yamaha G1E Electric 1983-1986
Asin: B0D29519KZ
Great Function: Select Premium Rubber For Stable Construction, Not Easy To Crack; Replace The Old Broken One To Ensure The Best Performance.
Package Included: 1 Pc Intake Manifold.
Simple To Replace: Installation Is A Breeze, Save Time And Effortlessly.
Premium Quality: The Intake Manifold Boot Is Made From Rubber, Duration Of Wearing, Lightweight, Rust Resistant And Corrosion Resistant.
Features
- Compatibility Model: The intake manifold boot is For Yamaha G1A Gas 1983-1986; For Yamaha G1E Electric 1983-1986
- Premium Quality: The intake manifold boot is made from rubber, duration of wearing, lightweight, rust resistant and corrosion resistant
- Great Function: Select premium rubber for stable construction, not easy to crack; Replace the old broken one to ensure the best performance
- Simple to replace: Installation is a breeze, save time and effortlessly
- Package Included: 1 Pc Intake Manifold
- See more on Amazon...
Brand: generic | Manufacturer: PHINDICE
Dimensions: 0.20 x 0.51 x 0.39 inches | Weight: 0.44 pounds
See On Amazon #25
VAKUUM Motorbike Fuel Supply Carburetor Intake Manifold Boot for 500 HO 2001-2013 3085809 Carburetor Kit
Asin: B0D22PRS26 | Model: VAKUUM | PartNumber: VAKUUM | Ean: 9586910203324
Made Of Selected High-Quality Metal Materials, Resistant To Wear, And Not Easily Damaged. Please Check Pictures And Specifications For Compatibility..
No Instructions Included.Professional Installation Is Highly Recommended!.
We Is Committed To Pursue Highest Quality And Offer Timely Customer Service. We Are Dedicated To Providing You With 100% Satisfaction Solution To Address Your Any Concern..
Professional Manufacturing, Exquisite Workmanship, Stable Performance, Can Be Used For A Long Time..
Product Number: For 500 Ho 2001 - 2013 3085809.
Features
- Model Name: intake manifold; Material Type: rubber
- Product Number: For 500 HO 2001 - 2013 3085809
- Made of selected high-quality metal materials, resistant to wear, and not easily damaged. Please check pictures and specifications for compatibility.
- Professional manufacturing, exquisite workmanship, stable performance, can be used for a long time.
- No Instructions Included.Professional Installation Is Highly Recommended!
- We is committed to pursue highest quality and offer timely customer service. We are dedicated to providing you with 100% satisfaction solution to address your any concern.
- See more on Amazon...
Brand: VAKUUM | Manufacturer: VAKUUM
Weight: 0.66 pounds
See On Amazon #26
partszen Carburetor Holder Intake Manifold Boot for Kawasaki for Prairie 360 KVF360 2X4 2003-2009, for KVF360 4X4 2003-2013, Repleacement for 16065-1379 Carburetor Adapter Interface
Asin: B09MTFNLYJ | Ean: 0710359138551 | UPC: 710359138551
Fitment For: For Kawasaki For Prairie 360 Kvf360 4X4 2003-2013 Carburetor Intake Manifold Boot.
Wish This High-Quality Aftermarket Product Kit Would Bring You A Good Experience. If There Is Any Problem, Please Feel Free To Contact Us..
Package Includes: 1 Pc Carburetor Adapter Interface; You Will Get As Pictured..
Compatible With: For Kawasaki For Prairie 360 Kvf360 2X4 2003-2009 Carburetor Intake Manifold Boot.
Features
- Replaces part number: For 16065-1379 Carburetor Intake Manifold Boot
- Compatible with: For Kawasaki for Prairie 360 KVF360 2X4 2003-2009 Carburetor Intake Manifold Boot
- Fitment for: For Kawasaki for Prairie 360 KVF360 4X4 2003-2013 Carburetor Intake Manifold Boot
- Package Includes: 1 PC Carburetor adapter interface; You will get as pictured.
- Wish this high-quality aftermarket product kit would bring you a good experience. If there is any problem, please feel free to contact us.
- See more on Amazon...
Brand: partszen | Manufacturer: partszen
See On Amazon #27
KIMISS Motorcycle Carb Carburetor Intake Manifold Adapter Boot for YAMAHA YZ250 02-18 5NX-13565-00-00
Asin: B07JD8GY9M | Ean: 0757686126509 | UPC: 757686126509
【High Quality Rubber】 ------ Rubber Black Caburetor Boot With Injection Molding Technology Made These Intake Manifold Boot Joints Very Durable Wear-Resistant, Of Good Sealing Performance And Oil Resistant. You Will Use It For A Long Lasting Time To Reduce Frequently Replacement Cost..
【Easy To Install】 The Carburetor Boot Joints Is Easy To Install, And You May Need Some Adjusting For A Perfect Fit. And It Is Very Simple. If You Have Any Question, Firstly Check Product Description Now..
【Direct Replacement】 This Motorcycle Caburetor Boot Holders Can Be Used To Place Existing Damaged Intake Manifold Joint Boot For A High Performance Running. Just Direct Replace And Ride Again..
【Specially Designed For Yamaha】 This Motorcycle Rubber Boot Kit Is Compatible For For Yamaha Yz250 2002-2018 And The Replaces Oem Part Number: 5Nx-13565-00-00. Please Check The Fitment And Oe Number Carefully Beofore Bidding..
Features
- Practical Function This Carburetor Intake Manifold Boot adapter help to enlarge the internal diameter of carb and increase the intake of mixed gas, giving your machine the new power and have more fun with the power at your finger tips.
- Specially Designed for Yamaha This motorcycle rubber boot kit is compatible for for YAMAHA YZ250 2002-2018 and the Replaces OEM Part Number: 5NX-13565-00-00. Please check the fitment and OE number carefully beofore bidding.
- High Quality Rubber ------ Rubber black caburetor boot with injection molding technology made these intake manifold boot joints very durable wear-resistant, of good sealing performance and oil resistant. You will use it for a long lasting time to reduce frequently replacement cost.
- Direct Replacement This motorcycle caburetor boot holders can be used to place existing damaged intake manifold joint boot for a high performance running. Just direct replace and ride again.
- Easy to Install The carburetor boot joints is easy to install, and you may need some adjusting for a perfect fit. And it is very simple. If you have any question, firstly check product description now.
- See more on Amazon...
Brand: KIMISS | Manufacturer: KIMISS
Dimensions: 3.94 x 3.94 x 3.94 Inches
See On Amazon #28
FVRITO Mini Bike Intake Manifold for Predator 212 196cc 224cc Coleman CT200U CT200U-EX BT200X Minibike KT196 Go Kart 6.5HP Honda GX200 GX160 Clone Engine Performance Parts Rainbow
Asin: B0CLVHHWY2 | Model: FV-JQG007-212-C | PartNumber: FV-JQG007-212-C
Exquisite Look & Performance- The Upgrade Predator 212 Carburetor Intake Manifold Pipe Is Made Of High Quality Cnc Aluminum Material With A Nice Rainbow Finish, Which Is Lightweight, Durable And More Unique. Smooth Interior Of Intake Manifold Improves Intake Volume To Make The Airflow More Stable. Boosting Your Engine's Power To Maximize Power And Fuel Economy And It Provides Good Connection Between Carburetor And Engine. Simple Design And Convenient Installation With Hardwares.
Package Include- 1 X Intake Mainfold, 1 X Wrench, 1 X Set Gaskets, 1 X Mounting Screws.
Attention- This Intake Manifold Adapter Needs To Match Vm22 Carburetor Or Other Flanged Carburetors. It Works On The Mini Bikes, And Can Also Be Used On Go Karts With Modifications To The Throttle Cable.
Fitment- Coleman Ct200u Ct200u-Ex Bt200x Ct200u-A Rb200 Trail 200, Baja Motorsports Mini Bike Mb165 & Mb200 (Heat, Mini Baja,Warrior), Massimo Mb200, Realtre* Rt200, Axi* M200, Mega Moto Mega Max Mm-B212mx, Mega Moto Mm-B212-Mxs, Monster Moto Mm-B212-Rb, Trailmaste* Mb200 Mini Bike, Coleman Kt196 / Bk200 / Rtk200 Go Kart, Trailmaste* Buggy Interceptor/ Blazer 200R, Trailmaste* 163 Mini Xrx / R+ / Xrs+ Kids Go Kart, Hammerhead 80T / Mini Shark Go Kart, Yerf Do*, Motote* Mud Monster Xl, Murra*, Manc*.
Features
- Wide Compatibility- Predator 212cc 196cc 6.5 HP GX160 GX200 Hemi / Non-Hemi Clone Engine, Harbor Freight 60363 68121 68120 69727 69730 6.5HP / 7HP 212cc Engine (RATO R210-III), Powerhorse 208cc, DuroMa* XP7HPE, Hisu* 196cc, Tillotso* 212R, Lifan LF168F-2BQ 163FML, Brigg* & Stratto* 6.5HP Engine
- Fitment- Coleman CT200U CT200U-EX BT200X CT200U-A RB200 Trail 200, Baja Motorsports Mini Bike MB165 & MB200 (Heat, Mini Baja,Warrior), Massimo MB200, Realtre* RT200, Axi* M200, Mega Moto Mega Max MM-B212MX, Mega Moto MM-B212-MXS, Monster Moto MM-B212-RB, TrailMaste* MB200 Mini Bike, Coleman KT196 / BK200 / RTK200 Go Kart, TrailMaste* Buggy Interceptor/ Blazer 200R, TrailMaste* 163 MINI XRX / R+ / XRS+ Kids Go Kart, Hammerhead 80T / Mini Shark Go Kart, Yerf Do*, Motote* Mud Monster XL, Murra*, Manc*
- Exquisite Look & Performance- The upgrade predator 212 carburetor intake manifold pipe is made of high quality CNC aluminum material with a nice rainbow finish, which is lightweight, durable and more unique. Smooth interior of intake manifold improves intake volume to make the airflow more stable. Boosting your engine's power to maximize power and fuel economy and it provides good connection between carburetor and engine. Simple design and convenient installation with hardwares
- Attention- This intake manifold adapter needs to match VM22 carburetor or other flanged carburetors. It works on the mini bikes, and can also be used on go karts with modifications to the throttle cable
- Package Include- 1 x Intake Mainfold, 1 x Wrench, 1 x Set Gaskets, 1 x Mounting Screws
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
Warranty: 90 days
See On Amazon #29
Boyesen 645 Power Reed, Black
Asin: B000WJAJ2I | Model: 645 | PartNumber: 645 | Ean: 0804429003433 | UPC: 804429003433
The Top Reed Is Lightweight And Resilient For Crisp Throttle Response At Partial Throttle Or Low Rpms; The Stiffer, Bottom Reed Is Ported To Provide Maximum Flow And Horsepower At Higher Rpms.
Minor Change Gives Major Horsepower Improvements And Fuel Economy.
Fit Type: Vehicle Specific.
Longer Overall Life: Boyesen Power Reeds Outlast All Other Aftermarket Reed Petals.
Power Reeds Use A Patented Dual Stage Fiberglass Design For More Air Flow, More Air Velocity And More Power.
Features
- For: Honda TLM200 all models; Yamaha Banshee 1987-2006 (two sets required)
- Power reeds use a patented dual stage fiberglass design for more air flow, more air velocity and more power
- The top reed is lightweight and resilient for crisp throttle response at partial throttle or low RPMs; the stiffer, bottom reed is ported to provide maximum flow and horsepower at higher RPMs
- Longer overall life: Boyesen power reeds outlast all other aftermarket reed petals
- Minor change gives major horsepower improvements and fuel economy
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: Boyesen | Manufacturer: Boyesen
Dimensions: 5.00 x 10.10 x 5.60 Inches | Weight: 0.07 pounds
Warranty: Manufacturer
See On Amazon #30
MOTO1988 Carburetor Intake Manifold Boot Carb Joint For Polaris Outlaw 500 2006-2007 Polaris Predator 500 2003-2007 3087955
Asin: B09BNBFSPH | Model: 3087955 | PartNumber: 3087955 | Ean: 0797564407122 | UPC: 797564407122
Please Check The Intake Manifold Compatible Model And Oem Part Number Before Purchase. The Center Distance Of The Bolt Hole For This Intake Manifold Is Approximately 2.85 Inches.
Service:We Provide 1 Year Of Product Service. If You Encounter Problems In The Process Of Using The Product, Please Feel Free To Contact Us..
Package:Intake Manifold X 1.
Replacement Part Number: 3087955.
Features
- Fitment fit for Polaris ATV Outlaw 500,Polaris ATV 2003-2007 Predator 500
- Replacement Part Number: 3087955
- Please check the intake manifold compatible model and OEM part number before purchase. The center distance of the bolt hole for this intake manifold is approximately 2.85 inches
- Package:Intake Manifold x 1
- Service:We provide 1 year of product service. If you encounter problems in the process of using the product, please feel free to contact us.
- See more on Amazon...
Brand: MOTO1988 | Manufacturer: MOTO1988
See On Amazon
Looking For Something Else?
Search