Best harmonic balancer repair sleeve gaskets - Buying Guide
Last Updated: 04/18/2024
Share on
Bestselling harmonic balancer repair sleeve gaskets on Amazon
- FEL-PRO 16250 Repair Sleeve
- SKF 99171 Speedi Sleeve and Tool Kit, Inch, 1.718in Shaft Diameter, 0.563in Width
- SKF 99181 Speedi Sleeve and Tool Kit, Inch, 1.808in Shaft Diameter, 0.563in Width
- SKF 99087 Speedi Sleeve and Tool Kit, Inch, 0.875in Shaft Diameter, 0.3130in Width
- FEL-PRO 16312 Repair Sleeve Tool
- REPLACEMENTKITS.COM Brand Shaft Wear Sleeve Repair Kit Fits .873 - .877 shafts Replaces 99087
- FEL-PRO 16274 Repair Sleeve
- SKF 99165 Speedi Sleeve and Tool Kit, Inch, 1.656in Shaft Diameter, 0.55in Width
- SKF 99225 Speedi Sleeve and Tool Kit, Inch, 2.252in Shaft Diameter, 0.781in Width
- FEL-PRO 16202 Repair Sleeve
#1
FEL-PRO 16250 Repair Sleeve
Asin: B000C2C9TG | Model: 16250 | PartNumber: 16250 | Ean: 0084113868931 | UPC: 084113868931
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 1.20 x 5.10 x 5.00 Inches | Weight: 0.03 pounds
See On Amazon #2
SKF 99171 Speedi Sleeve and Tool Kit, Inch, 1.718in Shaft Diameter, 0.563in Width
Asin: B000EPR7FW | Model: 99171 | PartNumber: 99171 | Ean: 0085311041522 | UPC: 085311041522
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.15 pounds
See On Amazon #3
SKF 99181 Speedi Sleeve and Tool Kit, Inch, 1.808in Shaft Diameter, 0.563in Width
Asin: B000EPTAPW | Model: 99181 | PartNumber: 99181 | Ean: 0085311041607 | UPC: 085311041607
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches | Weight: 0.10 Pounds
See On Amazon #4
SKF 99087 Speedi Sleeve and Tool Kit, Inch, 0.875in Shaft Diameter, 0.3130in Width
Asin: B000EPR7DO | Model: 99087 | PartNumber: 99087 | Ean: 0085311041102 | UPC: 085311041102
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches
See On Amazon #5
FEL-PRO 16312 Repair Sleeve Tool
Asin: B000C2E3EK | Model: 16312 | PartNumber: 16312 | Ean: 0084113860218, 0841138602182 | UPC: 841138602182, 084113860218
Engineered And Manufactured Specifically For The Repair Environment.
Validated For Fit, Form, And Function.
Unsurpassed Quality You Can Trust.
Application Specific Design To Ensure A Perfect Fit.
Features
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 1.88 x 4.50 x 4.50 inches | Weight: 0.10 pounds
Warranty: Manufacturer Warranty
See On Amazon #6
REPLACEMENTKITS.COM Brand Shaft Wear Sleeve Repair Kit Fits .873 - .877 shafts Replaces 99087
Asin: B07YYJ7GM4 | Ean: 0850002360714 | UPC: 850002360714
Includes Stainless Steel Sleeve, Installation Tool & Instructions.
100% Satisfaction Guaranteed.
Highest Quality Aftermarket Parts Available.
Sae / Aisi 304 Stainless Steel. Surface Hardness: Over 220Hv (95Hrb).
Features
- Shaft Wear Sleeve Repair Kit Fits .873 - .877 shafts Replaces 99087
- SAE / AISI 304 stainless steel. Surface Hardness: Over 220HV (95HRB)
- Includes Stainless Steel Sleeve, Installation Tool & Instructions
- Highest Quality Aftermarket Parts Available
- 100% Satisfaction GUARANTEED
- See more on Amazon...
Brand: REPLACEMENTKITS.COM | Manufacturer: REPLACEMENTKITS.COM
See On Amazon #7
FEL-PRO 16274 Repair Sleeve
Asin: B000Q0U70W | Model: 16274 | PartNumber: 16274 | Ean: 0614046846449 | UPC: 614046846449
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 03/31/2008
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 1.00 x 5.00 x 5.00 inches | Weight: 0.08 pounds
See On Amazon #8
SKF 99165 Speedi Sleeve and Tool Kit, Inch, 1.656in Shaft Diameter, 0.55in Width
Asin: B000EPPAU6 | Model: 99168 | PartNumber: 99168 | Ean: 0085311889384 | UPC: 085311889384
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches | Weight: 0.10 Pounds
Warranty: One Year Warranty
See On Amazon #9
SKF 99225 Speedi Sleeve and Tool Kit, Inch, 2.252in Shaft Diameter, 0.781in Width
Asin: B000C05QIO | Model: 99225 | PartNumber: 99225 | Ean: 0085311041799 | UPC: 085311041799
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.15 pounds
Warranty: One Year Warranty
See On Amazon #10
FEL-PRO 16202 Repair Sleeve
Asin: B000CNBVDK | Model: 16202 | PartNumber: 16202 | Ean: 0084113868061 | UPC: 084113868061
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 Pounds
See On Amazon #11
Coast to Coast 99149 Repair Sleeve
Asin: B00279RS1Q | Model: 99149 | PartNumber: 99149 | Ean: 0682034677740 | UPC: 682034677740
Item Is A Precision Engineered Sleeve Made From Stainless Steel To Extend The Life Of The Shaft.
Repair Sleeve Provides Lower Coefficient Of Friction.
Our Repair Sleeve Restores Your Worn Yokes And Shafts To Give Them New Life.
The Sleeve Is Used With The Existing Seal And Comes With An Installation Tool.
Features
- Repair Sleeves are used when a groove has been worn into the shafts sealing surface
- The sleeve is used with the existing seal and comes with an installation tool
- Item is a precision engineered sleeve made from Stainless Steel to extend the life of the shaft
- Our repair sleeve restores your worn yokes and shafts to give them new life
- Repair Sleeve provides lower coefficient of friction
- See more on Amazon...
First Available: 04/06/2012
Brand: Precision Automotive | Manufacturer: Coast To Coast (C2C)
Dimensions: 1.75 x 2.75 x 2.75 inches | Weight: 0.06 pounds
Warranty: 90 Days
See On Amazon #12
Coast to Coast 99125 Repair Sleeve
Asin: B00279K34A | Model: 99125 | PartNumber: 99125 | Ean: 0682034675852 | UPC: 682034675852
Item Is A Precision Engineered Sleeve Made From Stainless Steel To Extend The Life Of The Shaft.
Repair Sleeve Provides Lower Coefficient Of Friction.
Our Repair Sleeve Restores Your Worn Yokes And Shafts To Give Them New Life.
The Sleeve Is Used With The Existing Seal And Comes With An Installation Tool.
Features
- Repair Sleeves are used when a groove has been worn into the shafts sealing surface
- The sleeve is used with the existing seal and comes with an installation tool
- Item is a precision engineered sleeve made from Stainless Steel to extend the life of the shaft
- Our repair sleeve restores your worn yokes and shafts to give them new life
- Repair Sleeve provides lower coefficient of friction
- See more on Amazon...
First Available: 04/06/2012
Brand: Precision Automotive | Manufacturer: Coast To Coast (C2C)
Dimensions: 2.00 x 3.00 x 4.00 inches
Warranty: 90 Days
See On Amazon #13
SKF 99262 Speedi Sleeve and Tool Kit, Inch, 2.628in Shaft Diameter, 0.781in Width
Asin: B000EPPAWE | Model: 99262 | PartNumber: 99262 | Ean: 0085311042048 | UPC: 085311042048
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.18 pounds
See On Amazon #14
FEL-PRO 16251 Repair Sleeve
Asin: B000C2E3FE | Model: 16251 | PartNumber: 16251 | Ean: 0084113868467 | UPC: 084113868467
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #15
FEL-PRO 16269-1 Repair Sleeve
Asin: B000C2ABMI | Model: 16269-1 | PartNumber: 16269-1 | Ean: 0084113861185 | UPC: 084113861185
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 03/31/2008
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #16
FEL-PRO 16258 Repair Sleeve
Asin: B000C2G5P0 | Model: 16258 | PartNumber: 16258 | Ean: 0084113868856 | UPC: 084113868856
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 1.00 x 5.00 x 5.00 inches | Weight: 0.03 pounds
Warranty: Manufacturer Warranty
See On Amazon #17
Fel-Pro 16328 Repair Sleeve Tool
Asin: B0016ZIOGK | Model: 16328 | PartNumber: 16328 | Ean: 0614046868212 | UPC: 614046868212
Engineered And Manufactured Specifically For The Repair Environment.
Validated For Fit, Form, And Function.
Unsurpassed Quality You Can Trust.
Application Specific Design To Ensure A Perfect Fit.
Features
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- See more on Amazon...
First Available: 03/31/2008
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 2.00 x 5.00 x 5.00 inches
See On Amazon #18
SKF 99085 Speedi Sleeve and Tool Kit, Inch, 0.866in Shaft Diameter, 0.315in Width
Asin: B000EPR7DE | Model: 99085 | PartNumber: 99085 | Ean: 0085311041089 | UPC: 085311041089
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches
Warranty: One Year Warranty
See On Amazon #19
FEL-PRO 16213 Repair Sleeve
Asin: B000CNGXQ0 | Model: 16213 | PartNumber: 16213 | Ean: 0084113861697 | UPC: 084113861697
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 1.00 x 3.31 x 3.31 inches | Weight: 0.05 Pounds
See On Amazon #20
FEL-PRO 16228 Repair Sleeve
Asin: B0016ZGM1Y | Model: 16228 | PartNumber: 16228 | Ean: 0614046868182 | UPC: 614046868182
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 03/31/2008
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 1.00 x 5.00 x 5.00 Inches
Warranty: Warranty
See On Amazon #21
SKF 99177 Speedi Sleeve and Tool Kit, Inch, 1.772in Shaft Diameter, 0.551in Width
Asin: B000EPTAPC | Model: 99177 | PartNumber: 99177 | Ean: 0085311041577 | UPC: 085311041577
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.14 pounds
Warranty: One Year Warranty
See On Amazon #22
FEL-PRO 16205 Repair Sleeve
Asin: B000CNIS36 | Model: 16205 | PartNumber: 16205 | Ean: 0084113868030 | UPC: 084113868030
Meets Or Exceeds All Original Equipment Specifications.
Unsurpassed Quality You Can Trust.
Engineered And Manufactured Specifically For Repair Applications.
Repairs Worn Sealing Surfaces To Assure A Leak Free Repair.
Features
- Engine Saver Hardware cost-saving application
- Repairs worn sealing surfaces to assure a leak free repair
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- See more on Amazon...
First Available: 08/01/2006
Brand: Fel-Pro | Manufacturer: FEL-PRO
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #23
Speedi-Sleeve And Tool Kit
Asin: B000EPR7DY | Model: 99125 | PartNumber: 99125 | Ean: 0085311041263, 0085311041256 | UPC: 085311041256, 085311041263
Part Number: 085311041263.
Package Weight: 0.100 Pounds.
Precision Ground Stainless Steel Sleeve For Tough Seal Surface, Fast Shaft Repair.
Features
- Package Dimension : 11.176 cms L x 10.668 cms W x 4.572 cms H
- Precision ground stainless steel sleeve for tough seal surface, fast shaft repair
- Part number: 085311041263
- Package Weight: 0.100 pounds
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches
Warranty: One Year Warranty
See On Amazon #24
SKF 99098 Speedi Sleeve and Tool Kit, Inch, 0.984in Shaft Diameter, 0.313in Width
Asin: B000C07P06 | Model: 99098 | PartNumber: 99098 | Ean: 0085311041140 | UPC: 085311041140
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.05 pounds
Warranty: One Year Warranty
See On Amazon #25
SKF 99220 Speedi Sleeve and Tool Kit, Inch, 2.198in Shaft Diameter, 0.5in Width
Asin: B000EPR7HU | Model: 99220 | PartNumber: 99220 | Ean: 0085311902670 | UPC: 085311902670
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.18 pounds
See On Amazon #26
MAHLE Original Engine Crankshaft Repair Sleeve A338
Asin: B000CLCFY6 | Model: A338 | PartNumber: A338 | Ean: 0725975293720 | UPC: 725975293720
The Contents Of Mahle Original Gaskets Are Packaged In Shrink Wrapped Tray, Giving You The Added Security Of Knowing That You Have The Right Parts, Prior To Opening The Package.
Mahle Original Gaskets Is The Leader In Domestic, Asian And European Applications.
Features
- MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE Original gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
- See more on Amazon...
Brand: MAHLE | Manufacturer: MAHLE Aftermarket
Dimensions: 1.84 x 4.65 x 4.55 inches | Weight: 0.28 pounds
Warranty: 1 year
See On Amazon #27
271002162 295501206 Rotary Ring Carbon Ring Kit C-Clip Compatible with For BRP Seadoo RXP X RXP RS 300 Engine.
Asin: B0CG5QDJC5 | Model: 271002162，295501206 | PartNumber: 271002162，295501206
Manufactured To Oem Standards And Rigorously Tested At The Factory.
Compatible With Sea-Doo And Many More... Please Verify Your Oem Part Number From Your Original Unit To Help Ensure Fitment..
Features
- Part Number:271002162 295501206
- Compatible with Sea-Doo and many more... Please verify your OEM part number from your original unit to help ensure fitment.
- Manufactured to OEM standards and rigorously tested at the factory
- See more on Amazon...
Brand: TMLGB | Manufacturer: TMLGB
Dimensions: 2.30 x 6.00 x 4.00 inches
See On Amazon #28
SKF 99866 Speedi Sleeve And Tool Kit, Inch, 1.102" Shaft Diameter, 0.375" Width
Asin: B0159SO61Q | Ean: 0085311256568 | UPC: 085311256568
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Weight: 0.17 pounds
See On Amazon #29
MAHLE A2261 Repair Sleeve
Asin: B00D8FRKR0 | Model: A2261 | PartNumber: A2261 | Ean: 0725975796153 | UPC: 725975796153
Comprehensive Range Of Products Available.
Manufactured Specifically For Each Vehicle – Fits Like The Original Part.
Features
- Cutting edge research and development
- Manufactured specifically for each vehicle fits like the original part
- Comprehensive range of products available
- See more on Amazon...
Brand: Mahle | Manufacturer: MAHLE
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #30
SKF 99112 Speedi Sleeve and Tool Kit, Inch, 1.125in Shaft Diameter, 0.313in Width
Asin: B000EPTANY | Model: 99114 | PartNumber: 99114 | Ean: 0085311041201 | UPC: 085311041201
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search