Best tie rod ends & parts - Buying Guide
Last Updated: 04/25/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Golf Cart Steering Tie Rod End Shaft Assembly (2 Pack) For EZGO TXT Medalist Golf Cart 1994-2001.5 Replaces# 70074-G01, 70074G01, 70074-G02, 70074G02.
Asin: B09Y3Z4VPX | Model: 70074-G01 | PartNumber: 70074-G01
【Note】 These Tie Rod Kits Are Ezgo Models With 3-Bolt Steering Columns Only. If Your Steering Box Is Located On The Axle Assembly, This Kit Will Not Work.
This Item Is Backed By A 12-Month Warranty. In The Event This Item Should Fail Due To Manufacturing Defects During Intended Use, You Can Rely On Our No-Hassle Replacement Or Refund Service.
【Feature】Fully Sealed, No Grease Nipple Required, Maintenance-Free, No Need For Regular Oiling.
【Oem Part Number】 70074-G01, 70074-G02, 70074G01, 70074G02.
Features
- Adaptation For EZGO TXT Medalist Marathon Vehicles 1994.5-2001.5 Golf Cart
- OEM Part Number 70074-G01, 70074-G02, 70074G01, 70074G02
- Note These tie rod kits are EZGO models with 3-bolt steering columns only. If your steering box is located on the axle assembly, this kit will not work
- Feature Fully sealed, no grease nipple required, maintenance-free, no need for regular oiling
- This item is backed by a 12-MONTH WARRANTY. In the event this item should fail due to manufacturing defects during intended use, You can rely on our no-hassle replacement or refund service
- See more on Amazon...
Brand: Jepacr | Manufacturer: Jepacr
Warranty: 12-MONTH
See On Amazon #2
MOOG ES3427T Steering Drag Link for Ford F-250 Super Duty
Asin: B000C541AI | Model: ES3427T | PartNumber: ES3427T | Ean: 0800662786980, 0080066278698, 7258007111721 | UPC: 080066278698, 800662786980
Absorbs Impact -- Belleville Preload Washer Helps Eliminate Spring Bind And Shattering During Shock Load.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Greaseable Socket -- Inhibits Corrosion And Wear By Allowing New Lubricant To Flush Debris.
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Restores Like-New Steering -- Patented Pressed-In Cover Plate Seals Out Debris And Minimizes Looseness, Reducing Bearing Wear And Promoting Longer Life.
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2000-2005 Ford Excursion; 1999-2004 Ford F-250 Super Duty; 1999-2004 Ford F-350 Super Duty; 1999-2002 Ford F-450 Super Duty; 1999-2002 Ford F-550 Super Duty
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- See more on Amazon...
First Available: 09/26/2013
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 1.50 x 2.70 x 2.40 inches | Weight: 3.00 pounds
Warranty: Limited Warranty
See On Amazon #3
MOOG ES800309 Steering Tie Rod End for Lexus IS300
Asin: B0031GTPP6 | Model: ES800309 | PartNumber: ES800309 | Ean: 0080066431437 | UPC: 080066431437
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Engineering Excellence -- With 50+ Dedicated Engineers And 50+ Patents, Moog Engineers Every Part With Purpose.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2001-2005 Lexus IS300
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- ENGINEERING EXCELLENCE -- With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- See more on Amazon...
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 1.75 x 8.00 x 3.31 Inches | Weight: 1.00 Pounds
See On Amazon #4
BOXI 2pcs Front Outer Tie Rod Ends Fit for Hyundai Elantra 2011-2016/Elantra GT 2013-2017/Veloster 2012-2017 / for Kia Soul 2014-2019/Soul EV 2015-2019 | ES801074 ES801075
Asin: B0BN1HDTBX | Model: BXM600170021-2 | PartNumber: BXM600170021-2
Replace Part Number : Es801074 Es801075.
Important Note - Please Check The Description Or Use The Year/Make/Model Drop Down Bar To Confirm The Compatibility Before Purchasing. If You Don't Make Sure Whether This Item Fit For Your Vehicles, Please Message Us.
3 Year Warranty. Please Refer To The Listing Pictures For An Accurate Description Of The Parts Included In The Kit..
Placement On Vehicle: Front, Left, Right.
Features
- Replacement for Hyundai Elantra 2013-2016/Elantra 2011-2012 (Sedan)/Elantra 2013-2014 Coupe/Elantra GT 2013-2016/Elantra GT 2017 (Base)/Veloster 2012-2017; Replacement for Kia Soul 2014-2019/Soul EV 2015-2019
- Placement on Vehicle: Front, Left, Right
- Replace Part Number : ES801074 ES801075
- 3 year warranty. Please refer to the listing pictures for an accurate description of the parts included in the kit.
- IMPORTANT NOTE - Please check the description or use the year/make/model drop down bar to confirm the compatibility before purchasing. If you don't make sure whether this item fit for your vehicles, please message us
- See more on Amazon...
Brand: BOXI | Manufacturer: ShangHai BOXI Auto Parts Co., Ltd.
Warranty: 3 Year Warranty
See On Amazon #5
SCITOO 10pcs 2WD Suspension Kit Inner Outer Tie Rod End Center Link Adjusting Sleeve Sway Bar Idler Arm Fit 1996-2003 For Chevy S10 1996-2005 For Chevrolet Blazer 1996-2001 For GMC Jimmy
Asin: B07HG5YM4M | Model: 809885-5206-1843579961 | PartNumber: 809885-5206-1843579961
【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering.
【Note】 Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers.⚠ Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description..
【Suspension Kit Buyer's Guide】 A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work..
【Suspension Kit Include】(2) Es3379t Front Outer Tie Rod End - Rwd; (2) Es3380t Front Inner Tie Rod End - Rwd; (1) Ds1047 Center Link Tie Rod- Rwd; (2) Es2004s Front Tie Rod Adjusting Sleeve; (2) K5254 Front Sway Bar End Link; (1) K6187t Idler Arm;.
Features
- Suspension Kit Fitment 1996-2003 For Chevy S10 RWD; 1996-2005 For Chevy Blazer RWD; 1996-2001 For Gmc Jimmy RWD; 1996-2003 For Gmc Sonoma RWD; 1996- 2000 For Isuzu Hombre RWD
- Suspension Kit Include (2) ES3379T Front Outer Tie Rod End - RWD; (2) ES3380T Front Inner Tie Rod End - RWD; (1) DS1047 Center Link Tie Rod- RWD; (2) ES2004S Front Tie Rod Adjusting Sleeve; (2) K5254 Front Sway Bar End Link; (1) K6187T Idler Arm;
- When To Replace Suspension Kit Steering Noise Sounds When Turning Feeling Every Bump Difficulty When Steering
- Suspension Kit Buyer's Guide A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work.
- Note Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers. Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description.
- See more on Amazon...
Brand: SCITOO | Manufacturer: SCITOO
Dimensions: 3.15 x 23.17 x 7.48 Inches | Weight: 16.56 Pounds
Warranty: 1 year manufacturer
See On Amazon #6
Detroit Axle - Front Outer & Inner Tie Rod Ends for 2000-2013 Chevrolet Impala, 2004-2008 Pontiac Grand Prix, 2005-2009 Buick LaCrosse, 4 Inner & Outer Tie Rods Replacement
Asin: B01MZ64GPO
Detroit Axle Suspension Components Are Ready To Meet The Rigorous Demands Of Today’S Foreign And Domestic Passenger Cars, Trucks And Suvs.
10-Year Warranty.
Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability.
Kit Includes: 2X Front Outer Tie Rod Ends + 2X Front Inner Tie Rod Ends.
Features
- Front Tie Rods Replacement for 2005-2009 Buick Allure - [1997-2005 Buick Century] - 2005-2009 Buick LaCrosse - [1997-2004 Buick Rega] - 2000-2005 Chevrolet Impala - [2006-2009 Chevrolet Impala (No SS)] - 2010-2013 Chevrolet Impala - [2014-2016 Chevrolet Impala Limited] - 2000-2005 Chevrolet Monte Carlo - [2006-2007 Chevrolet Monte Carlo (No SS)] - 1998-2002 Oldsmobile Intrigue - [2004-2008 Pontiac Grand Prix]
- Kit Includes: 2x Front Outer Tie Rod Ends + 2x Front Inner Tie Rod Ends
- Detroit Axle Suspension components are ready to meet the rigorous demands of today s foreign and domestic passenger cars, trucks and SUVs
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10-Year warranty
- See more on Amazon...
Brand: Detroit Axle | Manufacturer: 81
Dimensions: 2.00 x 8.00 x 6.00 Inches | Weight: 4.00 Pounds
See On Amazon #7
MOOG ES3184RL Steering Tie Rod End for Ford Mustang
Asin: B000C55WZ6 | Model: ES3184RL | PartNumber: ES3184RL | Ean: 0080066434315 | UPC: 080066434315
Restores Like-New Steering -- Patented Pressed-In Cover Plate Seals Out Debris And Minimizes Looseness, Reducing Bearing Wear And Promoting Longer Life.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Absorbs Impact -- Belleville Preload Washer Helps Keep The Bearing Package Tight As Bearings Wear.
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Greaseable Socket -- Inhibits Corrosion And Wear By Allowing New Lubricant To Flush Debris.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 1994-2004 Ford Mustang
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- See more on Amazon...
First Available: 09/26/2013
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 1.00 x 0.90 x 0.70 Inches | Weight: 1.37 pounds
See On Amazon #8
NICHE Tie Rod End Kit for Polaris RZR XP Ranger Crew 900 Sportsman 570 800 Scrambler 400 Magnum 500 7061138
Asin: B0C8VDX8G4 | Ean: 0803467189871 | UPC: 803467189871
Fits Polaris 2011-2013 Rzr 4, 2010-2014 Rzr 4 800, 2012-2013 Rzr 4 Xp 900, 2012-2013,2018 Rzr 570, 2008-2014 Rzr 800, 2014 Rzr 900, 2011-2012 Rzr S, 2009-2014 Rzr S 800, 2011-2013 Rzr Xp 900.
Tie Rod Thread: 1/2 X 20; Tie Rod End Length 2 1/4 Inch.
Fits Polaris Ranger 2015-2018 1000, 2010-2014 400, 2005-2013 500, 2014-2016 570, 2006-2009 700, 2010-2017 800, 2011-2018 900, 2011-2013 Crew 500, 2014-2015 Crew 570, 2010-2013 Crew 800, 2012-2017 Crew.
Fits Polaris 2016 Ace 325, 2016-2017 Ace 570, 2016 Ace 900, 2014 Sportsman Ace, 2015 Sportsman Ace 325, 2015 Sportsman Ace 570.
Features
- Replaces OEM Part Numbers: Polaris 7061138
- Fits Polaris 2016 Ace 325, 2016-2017 Ace 570, 2016 Ace 900, 2014 Sportsman Ace, 2015 Sportsman Ace 325, 2015 Sportsman Ace 570
- Fits Polaris 2011-2013 RZR 4, 2010-2014 RZR 4 800, 2012-2013 RZR 4 XP 900, 2012-2013,2018 RZR 570, 2008-2014 RZR 800, 2014 RZR 900, 2011-2012 RZR S, 2009-2014 RZR S 800, 2011-2013 RZR XP 900
- Fits Polaris Ranger 2015-2018 1000, 2010-2014 400, 2005-2013 500, 2014-2016 570, 2006-2009 700, 2010-2017 800, 2011-2018 900, 2011-2013 Crew 500, 2014-2015 Crew 570, 2010-2013 Crew 800, 2012-2017 Crew
- Tie Rod Thread: 1/2 x 20; Tie Rod End Length 2 1/4 Inch
- See more on Amazon...
Brand: NICHE | Manufacturer: Mishon Inc
Dimensions: 1.60 x 6.10 x 5.90 Inches | Weight: 1.20 Pounds
See On Amazon #9
BOXI 4pcs Front Inner & Outer Tie Rod Ends Replacement for Nissan Altima 2007 2008 2009 2010 2011 2012 | EV800356 ES800357 ES800358
Asin: B0B8Z1LPCW | Model: BXM00175-4 | PartNumber: BXM00175-4
Placement On Vehicle: Front, Left, Right.
Important Note - Please Check The Description Or Use The Year/Make/Model Drop Down Bar To Confirm The Compatibility Before Purchasing. If You Don't Make Sure Whether This Item Fit For Your Vehicles, Please Message Us.
3 Year Warranty.
Replace Part Number : Ev800356 Es800357 Es800358.
Features
- Replacement for Nissan Altima 2007 (BASE / S / SE / SL Models ONLY) / for Nissan Altima 2008-2009 (COUPE / BASE / S / SE / SL Models ONLY) / for Nissan Altima 2010-2011 (BASE / S / SL / SR Models ONLY) / for Nissan Altima 2012 All Models
- Replace Part Number : EV800356 ES800357 ES800358
- Placement on Vehicle: Front, Left, Right
- 3 year warranty
- IMPORTANT NOTE - Please check the description or use the year/make/model drop down bar to confirm the compatibility before purchasing. If you don't make sure whether this item fit for your vehicles, please message us
- See more on Amazon...
Brand: BOXI | Manufacturer: ShangHai BOXI Auto Parts Co., Ltd.
Warranty: 3 Year Warranty
See On Amazon #10
Detroit Axle - Front Outer Tie Rod Ends for 2007-2015 Nissan Altima, 2009-2018 Maxima, 2009-2012 Murano FWD, 2 Outer Tie Rod Ends Replacement
Asin: B01ENXWX8G | Ean: 0683318059542 | UPC: 683318059542
Detroit Axle Suspension Components Are Ready To Meet The Rigorous Demands Of Today's Foreign And Domestic Passenger Cars, Trucks And Suvs.
10-Year Warranty. Detroit Axle Is A Leading Global Retailer And Distributor Of Oe Re-Manufactured And New Aftermarket Auto Parts.
Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability.
Kit Includes: 2X Front Outer Tie Rod Ends.
Features
- Front Tie Rods Replacement for 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Nissan Maxima - [2007 2008 2009 2010 2011 2012 2013 2014 2015 Nissan Altima] - [2009 2010 2011 2012 Nissan Murano (FWD Only)]
- Kit Includes: 2x Front Outer Tie Rod Ends
- Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs
- Undergo Impact, Wear, and Fatigue Testing to Help Ensure Quality and Durability
- 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts
- See more on Amazon...
Brand: Detroit Axle | Manufacturer: Detroit Axle
Dimensions: 2.00 x 8.00 x 6.00 Inches | Weight: 1.00 Pounds
See On Amazon #11
3/8 x 3/8-24 Heim Joints Rod End Kit, 058 Bungs Panhard Bar Kit Left and Right Hand, 2 Set
Asin: B0C1GD9G5T | Model: 3/8 x 3/8-24 | PartNumber: 3/8 x 3/8-24
Simple Installation: The Joints Can Be Welded By Mig And Tig, Which Is Simple To Install And Saves Money.
Package Includes: 2 X Right Hand, 2 X Left Hand. If You Have Any Questions About Our Products, We Will Provide You With The Most Professional Technical Support.
Wide Range Of Applications: Ideal For Steering And Suspension, Steering Joints, Linkage Joints On Drawbars And Hot Rods.
Specification: 3/8 X 3/8-24 Panhard Bar Kit Thread: 3/8-24, Width: 0.210-0.227, Height: 0.551-0.562.
Features
- Heavy Duty Material: The heim joints rod end kit is heat treated and hard chrome plated to ensure durability. 100% inspection is carried out before leaving the factory to ensure heavy performance and longer service life
- Specification: 3/8 x 3/8-24 Panhard Bar Kit Thread: 3/8-24, Width: 0.210-0.227, Height: 0.551-0.562
- Simple Installation: The joints can be welded by MIG and TIG, which is simple to install and saves money
- Wide Range of Applications: Ideal for steering and suspension, steering joints, linkage joints on drawbars and hot rods
- Package Includes: 2 x Right Hand, 2 x Left Hand. If you have any questions about our products, we will provide you with the most professional technical support
- See more on Amazon...
Brand: TADYAO | Manufacturer: TADYAO
See On Amazon #12
SCITOO 10pcs Front Suspension Kit Lower Upper Ball Joint Inner Outer Tie Rod Ends Adjusting Sleeve Fit 1991-2001 For Jeep for Cherokee 1991-1992 Comanche
Asin: B07FZ26SLJ | Model: 801916-5206-1156089802 | PartNumber: 801916-5206-1156089802
【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering.
【Note】 Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers.⚠ Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description..
【Suspension Kit Buyer's Guide】 A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work..
【Suspension Kit Include】(1) Ds1238 Front Right Outer Center Link; (1) Ds1326s Front Tie Rod Adjusting Sleeve - Driver Side; (1) Es2079s Front Tie Rod Adjusting Sleeve; (1) Es3094l Front Left Outer Tie Rod End; (1) Es3095r Front Right Inner Tie Rod End; (1) Es3096l Front Inner Tie Rod End; (2) K3134t Front Upper Ball Joint; (2) K3161t Front Lower Ball Joint;.
Features
- Suspension Kit Fitment (w/ 11/16in-18 Threads) 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 For Jeep For Cherokee; 1991 1992 For Jeep Comanche ;
- Suspension Kit Include (1) DS1238 Front Right Outer Center Link; (1) DS1326S Front Tie Rod Adjusting Sleeve - Driver Side; (1) ES2079S Front Tie Rod Adjusting Sleeve; (1) ES3094L Front Left Outer Tie Rod End; (1) ES3095R Front Right Inner Tie Rod End; (1) ES3096L Front Inner Tie Rod End; (2) K3134T Front Upper Ball Joint; (2) K3161T Front Lower Ball Joint;
- When To Replace Suspension Kit Steering Noise Sounds When Turning Feeling Every Bump Difficulty When Steering
- Suspension Kit Buyer's Guide A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work.
- Note Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers. Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description.
- See more on Amazon...
Brand: SCITOO | Manufacturer: SCITOO
Dimensions: 3.74 x 163.23 x 3.94 Inches | Weight: 22.86 Pounds
See On Amazon #13
Detroit Axle - 6pc Front Tie Rod Ends for Chevy Traverse GMC Acadia Saturn Outlook Buick Enclave, 4 Inner & Outer Tie Rod Ends, 2 Boots Replacement
Asin: B07RT5NY1H
Detroit Axle Suspension Parts Are Ready To Meet The Rigorous Demands Of Today’S Foreign And Domestic Passenger Cars, Trucks And Suvs.
10 Year Warranty.
Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability.
Kit Includes: (2) Front Outer Tie Rods, (2) Inner Tie Rods, And (2) Rack Boots.
Features
- Tie Rods Kit Replacement for 2008-2017 Buick Enclave - [2009 2010 2011 2012 2013 2014 2015 2016 2017 Chevrolet Traverse] - 2007-2016 GMC Acadia - [2017 GMC Acadia Limited] - 2007-2010 Saturn Outlook
- Kit Includes: (2) Front Outer Tie Rods, (2) Inner Tie Rods, and (2) Rack Boots
- Detroit Axle Suspension parts are ready to meet the rigorous demands of today s foreign and domestic passenger cars, trucks and SUVs
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10 Year Warranty
- See more on Amazon...
Brand: Detroit Axle | Manufacturer: Detroit Axle
Dimensions: 2.00 x 8.00 x 6.00 Inches
See On Amazon #14
X AUTOHAUX 2pcs Front Outer Tie Rod End Links Suspension Steering Tie Rod Kit ES3691 for Ford F-150 2004-2008 for Lincoln Mark LT 2006-2008
Asin: B0BVK53JJV
Function: Suspension Is Used To Cushion The Impact Transmitted From The Uneven Road Surface To The Frame Or The Body, And To Reduce The Vibration Generated To Ensure The Smooth Running Of The Vehicle..
Installation: Drag Link Manual Not Included, You Can Loosen The Pinch Nut And Remove The Cotter Pin, Remove The Castle Nut And The Outer Tie Rod End, Then Remove The Boot And Remove The Inner Tie Rod End. At Last, Replace A New Tie Rod And Install It Back According To The Method Of Disassembly..
Package Includes: 2 X Es3691 Front Outer Tie Rod End.
Oe Number: Es3691, 4L3z3a130ca. Placement On Vehicle: Front Outer Left, Front Outer Right.
Features
- FITMENT: The tie rod end fit for Ford F-150 2004-2008, for Lincoln Mark LT 2006-2008.
- OE NUMBER: ES3691, 4L3Z3A130CA. PLACEMENT ON VEHICLE: Front Outer Left, Front Outer Right
- FUNCTION: Suspension is used to cushion the impact transmitted from the uneven road surface to the frame or the body, and to reduce the vibration generated to ensure the smooth running of the vehicle.
- PACKAGE INCLUDES: 2 x ES3691 Front Outer Tie Rod End
- INSTALLATION: Drag Link Manual not included, you can loosen the pinch nut and remove the cotter pin, remove the castle nut and the outer tie rod end, then remove the boot and remove the inner tie rod end. At last, replace a new tie rod and install it back according to the method of disassembly.
- See more on Amazon...
Brand: X AUTOHAUX | Manufacturer: X AUTOHAUX
See On Amazon #15
MOOG ES2838RL Steering Tie Rod End for Chevrolet K1500
Asin: B000C57VNC | Model: ES2838RL | PartNumber: ES2838RL | Ean: 0080066352244, 0080066173993 | UPC: 080066352244, 080066173993
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Rigorous Trials -- Comprehensive Evaluation Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Restores Like-New Steering -- Patented Pressed-In Cover Plate Seals Out Debris And Minimizes Looseness, Reducing Bearing Wear And Promoting Longer Life.
Greaseable Socket -- Inhibits Corrosion And Wear By Allowing New Lubricant To Flush Debris.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Absorbs Impact -- Belleville Preload Washer Helps Eliminate Spring Bind And Shattering During Shock Load.
Features
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TRIALS -- Comprehensive evaluation throughout design and development processes by MOOG engineers for quality you can count on
- See more on Amazon...
First Available: 09/26/2013
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 1.50 x 2.70 x 1.90 Inches | Weight: 1.40 Pounds
Warranty: Limited Warranty
See On Amazon #16
BOXI Front Inner & Outer Tie Rod Sway Bars Lower Ball Joint Fit for Buick Enclave 2008-2017 / for Chevrolet Traverse 2009-2017 / for GMC Acadia/for Saturn Outlook | EV800572 ES800286 K750155 K500088
Asin: B0CC23JF4X
Replace Part Number: Ev800572 Es800286 K750155 K500088.
Important Note - Please Check The Description Or Use The Year/Make/Model Drop Down Bar To Confirm The Compatibility Before Purchasing. If You Don't Make Sure Whether This Item Fit For Your Vehicles, Please Message Us.
3 Year Warranty. Please Refer To The Listing Pictures For An Accurate Description Of The Parts Included In The Kit..
Placement On Vehicle: Front, Left, Right.
Features
- Fit for Buick Enclave 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 / for Chevrolet Traverse 2009 2010 2011 2012 2013 2014 2015 2016 2017 / for GMC Acadia 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 / for GMC Acadia Limited 2017 / for Saturn Outlook 2007 2008 2009 2010
- Placement on Vehicle: Front, Left, Right
- Replace Part Number: EV800572 ES800286 K750155 K500088
- 3 year warranty. Please refer to the listing pictures for an accurate description of the parts included in the kit.
- IMPORTANT NOTE - Please check the description or use the year/make/model drop down bar to confirm the compatibility before purchasing. If you don't make sure whether this item fit for your vehicles, please message us
- See more on Amazon...
Brand: BOXI | Manufacturer: BOXI
Warranty: 3 Year Warranty
See On Amazon #17
MOOG ES3631 Steering Tie Rod End for Ford Escape
Asin: B000C59WWU | Model: ES3631 | PartNumber: ES3631 | Ean: 0080066323008 | UPC: 080066323008
Restores Like-New Steering -- Patented Pressed-In Cover Plate Seals Out Debris And Minimizes Looseness, Reducing Bearing Wear And Promoting Longer Life.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Absorbs Impact -- Belleville Preload Washer Helps Keep The Bearing Package Tight As Bearings Wear.
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Greaseable Socket -- Inhibits Corrosion And Wear By Allowing New Lubricant To Flush Debris.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2001-2004 Ford Escape; 2005-2007 Ford Escape; 2008-2008 Ford Escape; 2009-2009 Ford Escape; 2005-2005 Mercury Mariner; 2006-2007 Mercury Mariner; 2008-2008 Mercury Mariner; 2009-2009 Mercury Mariner; 2001-2009 Mazda Tribute
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- See more on Amazon...
First Available: 09/26/2013
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 0.60 x 0.70 x 2.00 inches | Weight: 1.00 pounds
Warranty: Limited Warranty
See On Amazon #18
Motorman Pair ES800223 (2) Front Outer Tie Rod End for 2007-2014 ESCALADE 2007-2013 AVALANCHE 2007-2014 TAHOE 2007-2013 SIERRA 1500 2007-2014 YUKON
Asin: B08V1KQ9TB
Oe Replacement -Es800222,Txms40601,Ms40601,Gs40601,45A1066,Meoe112,10410629,2600-83013,Jte1463,531-270,To85435,Ta5077,Es800222,5F9z3a130aa,8A5z3a130a,9G1z3a130a,Sut800222.
Fits Ensure: Please Input Your Make, Model, And Trim Level Into The Amazon Part Finder To Make Sure You Have The Right Part For Your Vehicle..
Guarantee: Buy In Confidence. We Have 24H Service And One Year Warranty For Each Part. If You Have Any Questions, Please Don’T Be A Shame To Contact Us, We Are Glad To Service You..
Compatibility -2007 - 2014 Escalade All Models,2007 - 2014 Escalade Esv All Models,2007 - 2013 Escalade Ext All Models,2007 - 2013 Avalanche All Models,2007 - 2013 Silverado 1500 All Models,2007 - 2014 Suburban 1500 All Models,2007 - 2014 Tahoe All Models,2007 - 2013 Sierra 1500 All Models,2007 - 2014 Yukon All Models,2007 - 2014 Yukon Xl 1500 All Models.
Features
- Package:2Pcs Front Outer Tie Rod End Link - ES800223
- Compatibility -2007 - 2014 ESCALADE All Models,2007 - 2014 ESCALADE ESV All Models,2007 - 2013 ESCALADE EXT All Models,2007 - 2013 AVALANCHE All Models,2007 - 2013 SILVERADO 1500 All Models,2007 - 2014 SUBURBAN 1500 All Models,2007 - 2014 TAHOE All Models,2007 - 2013 SIERRA 1500 All Models,2007 - 2014 YUKON All Models,2007 - 2014 YUKON XL 1500 All Models
- OE Replacement -ES800222,TXMS40601,MS40601,GS40601,45A1066,MEOE112,10410629,2600-83013,JTE1463,531-270,TO85435,TA5077,ES800222,5F9Z3A130AA,8A5Z3A130A,9G1Z3A130A,SUT800222
- Guarantee: Buy In Confidence. We have 24H Service and One Year Warranty for each part. If you have any questions, please don t be a shame to contact us, we are glad to service you.
- Fits Ensure: Please input your Make, Model, and Trim level into the Amazon Part Finder to make sure you have the right part for your vehicle.
- See more on Amazon...
Brand: MOTORMAN | Manufacturer: MOTORMAN
Dimensions: 2.68 x 6.69 x 4.21 Inches
See On Amazon #19
AngyMeck - 6PCS Front Inner Outer Tie Rods Adjusting Sleeve Center Link Drag Links Suspension Kit For Ford Bronco 1980-1996 F100 1980-1983 F150 1980-1996 F250 1989-1996 F350
Asin: B0B4ZCJ99G
Manufacturer Part Number: Ds1017, Ds1018, Es2077, Es2078, Es2079, Es2080，Ds1017t.
Support Lifetime Warranty. All Of Our Products Undergo Rigorous Testing To Assure They Meet Or Often Exceed Oem Quality.
Package Includes: 1 Front Inner Tie Rod End - Driver Side 1 Ds1018 Center Link 1 Front Outer Tie Rod End - Passenger Side 1 Front Outer Tie Rod End - Driver Side 1 Front Tie Rod Adjusting Sleeve - Driver Side 1 Front Tie Rod Adjusting Sleeve - Passenger Side.
Fits 1980-88 Ford F250 Truck Rear Wheel Drive Steering Kit Fits 1986-97 Ford F350 Truck Regular Cab Rear Wheel Drive 4200Lb Front Axle Steering Kit Fits 1986-97 Ford F350 Truck Extended Cab Rear Wheel Drive 4200Lb Front Axle Steering Kit Fits 1985 Ford F350 Truck Regular Cab Rear Wheel Drive Steering Kit Fits 1980-84 Ford F350 Truck Rear Wheel Drive Steering Kit.
Features
- Fits 1980-96 Ford Bronco Steering Kit Fits 1980-83 Ford F100 Truck Steering Kit Fits 1980-96 Ford F150 Truck Steering Kit Fits 1989 Ford F250 Truck (built After 2/89 Production Date) 4200lb Front Axle Steering Kit Fits 1997 Ford F250 Truck Rear Wheel Drive 4200lb Front Axle With Twin I-beam Front Suspension Steering Kit Fits 1990-96 Ford F250 Truck Rear Wheel Drive 4200lb Front Axle Steering Kit
- Fits 1980-88 Ford F250 Truck Rear Wheel Drive Steering Kit Fits 1986-97 Ford F350 Truck Regular Cab Rear Wheel Drive 4200lb Front Axle Steering Kit Fits 1986-97 Ford F350 Truck Extended Cab Rear Wheel Drive 4200lb Front Axle Steering Kit Fits 1985 Ford F350 Truck Regular Cab Rear Wheel Drive Steering Kit Fits 1980-84 Ford F350 Truck Rear Wheel Drive Steering Kit
- Manufacturer Part Number: DS1017, DS1018, ES2077, ES2078, ES2079, ES2080 DS1017T
- Package Includes: 1 Front Inner Tie Rod End - Driver Side 1 DS1018 Center Link 1 Front Outer Tie Rod End - Passenger Side 1 Front Outer Tie Rod End - Driver Side 1 Front Tie Rod Adjusting Sleeve - Driver Side 1 Front Tie Rod Adjusting Sleeve - Passenger Side
- Support Lifetime warranty. All of our products undergo rigorous testing to assure they meet or often exceed OEM quality
- See more on Amazon...
Brand: AngyMeck | Manufacturer: AngyMeck
See On Amazon #20
SOSOPART 15pc Set Front Suspension Kit Tie Rod End Adjusting Sleeve Sway Bar Link Lower Upper Ball Joint Idler Arm Pitman Arm Replacement for 1993-1999 For Chevy C1500 1995-2000 For Chevy Tahoe RWD
Asin: B09SXM1RLH | Model: Adjustable | PartNumber: Adjustable
🛒Durability - Manufactured With Premium Materials For Longer Lasting Driving Performance.
🛒Application - 1993-1999 For Chevrolet C1500;1993-1999 For Chevrolet C1500 Suburban;1993-2000 For Chevrolet C2500;1995-2000 For Chevrolet Tahoe (Rwd 5.7L V8);1993-1999 For Gmc C1500;1993-1999 For Gmc C1500 Suburban;1993-2000 For Gmc C2500;1995-1999 For Gmc Yukon (Rwd 5.7L V8).
🛒Tips - Before Placing The Order Please Check Your Car Model In The Amazon Fitment System.
🛒Easy Install - Suspension Part Are Built To Exact Oem Specifications And Quality.
Features
- LIST - This Kit Contain 15pcs Chassis Parts (1 Pitman Arm + 1 Idler Arm + 1 Idler Arm Bracket Assembly with Grease Hose + 2 Front Tie Rod Adjusting Sleeve + 2 Front Outer Tie Rod End + 2 Front Inner Tie Rod End + 2 Front Sway Bar End Link + 2 Front Upper Ball Joint + 2 Front Lower Ball Joint)
- EASY INSTALL - Suspension part are built to exact oem specifications and quality
- DURABILITY - Manufactured with premium materials for longer lasting driving performance
- TIPS - Before placing the order please check your car model in the Amazon Fitment System
- APPLICATION - 1993-1999 For Chevrolet C1500;1993-1999 For Chevrolet C1500 Suburban;1993-2000 For Chevrolet C2500;1995-2000 For Chevrolet Tahoe (RWD 5.7L V8);1993-1999 For Gmc C1500;1993-1999 For Gmc C1500 Suburban;1993-2000 For Gmc C2500;1995-1999 For Gmc Yukon (RWD 5.7L V8)
- See more on Amazon...
Brand: SOSOPART | Manufacturer: SOSOPART
Dimensions: 8.46 x 16.14 x 10.43 Inches | Weight: 29.03 Pounds
Warranty: 1 year manufacturer
See On Amazon #21
A-Premium 2 x Front Outer Tie Rod Ends, Compatible with Honda CR-V 1997-2001, Civic 1992-2000, Civic del Sol 1993-1997, Fit 2009-2014, Insight 2010-2014, Acura EL 1997-2000, Integra 1994-2001
Asin: B0BPLVT72J
[Ideal Replacement]: This Steering Tie Rod End Is Replacement For Above Model's Suspension System, And May Help You Resolve Those Problems: ① Loose Or Shaky Steering ② Strange Squeaky And Clunky Noises From Suspension ③ Uneven Tire Wear ④ Steering Wheel Drifting To One Side !!!!.
[Reference Part Number]: Es3332r, 53560Tf0003, Es3331r, 53540Tf0003.
[Specification]: Condition: Brand New; Ball Stud Material: Steel; Greased Fitting Included: No; Pre-Greased: Yes; Accessories Included: As Picture; About Warranty: 1-Year.
[Installation Position]: Front Outer Left And Right Side.
Features
- [Vehicle Fitment]: Compatible with Honda CR-V 1997-2001 Civic 1992-2000 Civic del Sol 1993-1997 Fit 2009-2013 Fit 2014-2014 (GAS Only) Insight 2010-2014 Fit For Acura EL 1997-2000 Integra 1994-2001
- [Installation Position]: Front Outer Left and Right Side
- [Ideal Replacement]: This steering tie rod end is replacement for above model's suspension system, and may help you resolve those problems: loose or shaky steering strange squeaky and clunky noises from suspension uneven tire wear steering wheel drifting to one side !!!!
- [Specification]: Condition: Brand New; Ball Stud Material: Steel; Greased Fitting Included: No; Pre-Greased: Yes; Accessories Included: As Picture; About Warranty: 1-Year
- [Reference Part Number]: ES3332R, 53560TF0003, ES3331R, 53540TF0003
- See more on Amazon...
Brand: A-Premium | Manufacturer: PremiumpartsWhosale
Warranty: One Year Unlimited Mileage Quality Guarantee. The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
See On Amazon #22
Auto Buffy Front End 12pc Suspension Kit for 00-04 Ford F-250 F-350 Super Duty Excursion, 2000 2001 2002 2003 2004 Replacement
Asin: B0D2333MP4 | Model: AB-382561 | PartNumber: AB-382561
Interchange Part Number K8607 K80026 K80273, Es3427 Es3422 Es3426, Ford, Super Duty, Tie Rod Set Adjustment Sleeve, K80274 Ds1438 Ds1439 Es3423, Steering Linkage, 2003, 2004, Eddie Bauer Limited King Ranch, 4 Wheel Drive, F-350 F-250 F250 F350 Super Duty, Excursion, Four-Wheel Drive, 4X4, For, 2000 2001 2002, Trucks Truck, 5.4L 6.0L 6.8L 7.3L Xl Xlt Lariat.
Safety Guarantee High-Strength Structure Can Withstand Repeated Impact Loads, Making It More Stable During Operation With Strong Torsional Resistance, Good Stability, Better Response To Wear And Fatigue, And Long Service Life..
Auto Buffy Components Are Ready To Meet The Rigorous Demands Of Today’S Foreign And Domestic Passenger Cars, Trucks, And Suvs..
10-Year Warranty: For Some Reason, If This Item Fails Due To Manufacturing Defects During Intended Use, We Will Replace The Part Free Of Charge. This Warranty Covers The Cost Of The Part Only..
Replacement For 2000 2001 2002 2003 2004 2005 Ford Excursion (All 4Wd Models) - [2000 2001 2002 2003 2004 Ford F-250 Super Duty (All 4Wd Models)] - 2000 2001 2002 2003 2004 Ford F-350 Super Duty (All 4Wd Models).
Features
- Kit Includes: 4x Front Lower & Upper Ball Joints+ 2x Front Left & Right Sway Bars +4x Front Inner & Outer Tie Rods + 2x Front Left & Right Adjustment Sleeves
- Replacement for 2000 2001 2002 2003 2004 2005 Ford Excursion (All 4WD Models) - [2000 2001 2002 2003 2004 Ford F-250 Super Duty (All 4WD Models)] - 2000 2001 2002 2003 2004 Ford F-350 Super Duty (All 4WD Models)
- Interchange Part Number K8607 K80026 K80273, ES3427 ES3422 ES3426, Ford, super duty, tie rod set adjustment sleeve, K80274 DS1438 DS1439 ES3423, Steering Linkage, 2003, 2004, Eddie Bauer Limited King Ranch, 4 wheel drive, F-350 F-250 f250 f350 super duty, Excursion, four-wheel drive, 4x4, for, 2000 2001 2002, trucks truck, 5.4L 6.0L 6.8L 7.3L XL XLT Lariat
- 10-Year Warranty: for some reason, if this item fails due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
- Safety Guarantee High-strength structure can withstand repeated impact loads, making it more stable during operation with strong torsional resistance, good stability, better response to wear and fatigue, and long service life.
- Auto Buffy components are ready to meet the rigorous demands of today s foreign and domestic passenger cars, trucks, and SUVs.
- See more on Amazon...
Brand: AUTO BUFFY | Manufacturer: AUTO BUFFY
Dimensions: 10.00 x 59.00 x 10.00 Inches | Weight: 50.00 Pounds
Warranty: 10-Year Warranty
See On Amazon #23
MOOG EV127 Steering Tie Rod End for Ford Mustang
Asin: B000C55XK0 | Model: EV127 | PartNumber: EV127 | Ean: 0080066165462, 0080066350332 | UPC: 080066350332, 080066165462
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Easy To Install -- Wrench Flats On Housing And Stud Provide Easy Installation And Alignment Adjustment.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 1986-1997 Ford Aerostar; 1994-2004 Ford Mustang; 1986-1995 Ford Taurus; 1989-1997 Ford Thunderbird; 1988-1994 Lincoln Continental; 1993-1998 Lincoln Mark VIII; 1989-1997 Mercury Cougar; 1986-1995 Mercury Sable
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- See more on Amazon...
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.10 pounds
Warranty: Limited Warranty
See On Amazon #24
MOOG DS300008 Steering Tie Rod End for Ford F-250 Super Duty
Asin: B006DYKZUW | Model: DS300008 | PartNumber: DS300008 | Ean: 0080066192796 | UPC: 080066192796
Restores Like-New Steering -- Patented Pressed-In Cover Plate Seals Out Debris And Minimizes Looseness, Reducing Bearing Wear And Promoting Longer Life.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Absorbs Impact -- Belleville Preload Washer Helps Keep The Bearing Package Tight As Bearings Wear.
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Greaseable Socket -- Inhibits Corrosion And Wear By Allowing New Lubricant To Flush Debris.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2005-2016 Ford F-250 Super Duty; 2017-2022 Ford F-250 Super Duty; 2005-2016 Ford F-350 Super Duty; 2017-2022 Ford F-350 Super Duty; 2005-2019 Ford F-450 Super Duty; 2005-2019 Ford F-550 Super Duty
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- See more on Amazon...
Brand: MOOG | Manufacturer: Moog
Dimensions: 2.70 x 10.40 x 8.10 Inches | Weight: 3.00 Pounds
See On Amazon #25
MOOG EV800572 Steering Tie Rod End for Chevrolet Traverse
Asin: B004J2KG4K | Model: EV800572 | PartNumber: EV800572 | Ean: 0080066445946 | UPC: 080066445946
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Time Savings -- Pre-Applied Thread Locking Compound Makes Installation Easier And Prevents Self-Loosening.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Easy To Install -- Wrench Flats On Housing And Stud Provide Easy Installation And Alignment Adjustment.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2008-2017 Buick Enclave; 2009-2017 Chevrolet Traverse; 2017-2017 GMC Acadia Limited; 2007-2016 GMC Acadia; 2007-2010 Saturn Outlook
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- TIME SAVINGS -- Pre-applied thread locking compound makes installation easier and prevents self-loosening
- See more on Amazon...
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 2.00 x 14.10 x 2.30 inches | Weight: 1.75 pounds
Warranty: Limited Warranty
See On Amazon #26
MOOG EV441 Steering Tie Rod End for BMW 325i
Asin: B000C57XD0 | Model: EV441 | PartNumber: EV441 | Ean: 0080066321721 | UPC: 080066321721
Rigorous Trials -- Comprehensive Evaluation Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Easy To Install -- Wrench Flats On Housing And Stud Provide Easy Installation And Alignment Adjustment.
Features
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TRIALS -- Comprehensive evaluation throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- See more on Amazon...
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 2.00 x 13.50 x 2.00 Inches | Weight: 1.05 Pounds
Warranty: Limited Warranty
See On Amazon #27
MOOG ES800333 Steering Tie Rod End for Honda Odyssey
Asin: B003UHXWBO | Model: ES800333 | PartNumber: ES800333 | Ean: 0080066435848 | UPC: 080066435848
Restores Like-New Steering -- Patented Pressed-In Cover Plate Seals Out Debris And Minimizes Looseness, Reducing Bearing Wear And Promoting Longer Life.
Rigorous Testing -- Comprehensive Testing Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Easy To Install -- Precision Tolerances For Easy Installation And Steering Alignment Giving You A Perfect Fit Right Out Of The Box.
Absorbs Impact -- Belleville Preload Washer Helps Keep The Bearing Package Tight As Bearings Wear.
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Greaseable Socket -- Inhibits Corrosion And Wear By Allowing New Lubricant To Flush Debris.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Get The Right Part -- Before Purchasing, Research To Ensure That The Part Will Fit Your Vehicle; Enter All Vehicle Information (Year, Make, Model, Engine And Trim) For Compatibility And Check Qualifier Notes.
Features
- COMPATIBILITY Fits 2006-2014 Honda Ridgeline; 2011-2017 Honda Odyssey
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- See more on Amazon...
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 2.63 x 9.75 x 3.50 Inches | Weight: 1.30 Pounds
See On Amazon #28
TOVASTY TR2383 1Pcs Inner Steering Tie Rod End for 2002-07 Saturn Vue / 2008-09 Saturn Vue
Asin: B0BHWY9RX7 | Model: 1Pcs-Inner | PartNumber: 1Pcs-Inner
【Oe Quality】Meet Or Exceed Oe Quality For Easy Installation And Increased Efficiency.
【Durable And Long-Lasting】Designed To Resist Rust And Corrosion, Ensuring Exceptional Long-Term Performance. Rigorously Tested For Durability, Our Product Line Covers Over 873% Of Models, Effectively Satisfying Almost All Market Demands..
【Quick Selection】To Ensure That The Part Is Suitable For Your Vehicle Application, Please Use Amazon's Vehicle Fitment Tool Part Finder (Located At The Top Of The Listing On Desktop And Below The Images On Mobile) Before Making A Purchase. Also, Kindly Check Our "Notes" Section Before Placing Your Order. Note That Bundles Must Be Returned As A Complete Set, And Partial Returns Of Bundles Are Not Allowed..
Features
- Product Content Our kit includes ready to install 1Pcs Steering Tie Rod End. Photos shown are for general representation only. Actual product may vary according to different car models.
- Quick Selection To ensure that the part is suitable for your vehicle application, please use Amazon's vehicle fitment tool Part Finder (located at the top of the listing on desktop and below the images on mobile) before making a purchase. Also, kindly check our Notes section before placing your order. Note that bundles must be returned as a complete set, and partial returns of bundles are not allowed.
- OE quality Meet or exceed OE quality for easy installation and increased efficiency
- Durable and Long-Lasting Designed to resist rust and corrosion, ensuring exceptional long-term performance. Rigorously tested for durability, our product line covers over 873% of models, effectively satisfying almost all market demands.
- See more on Amazon...
Brand: TOVASTY | Manufacturer: TOVASTY
See On Amazon #29
ABN Inner Tie Rod Tool 3/8in Low Profile Tool for Inner Tie Rod Removal/Installation
Asin: B06XWBZ4YN | Model: ABN-0258 | PartNumber: ABN-0258 | Ean: 0688295870258 | UPC: 688295870258
Easy To Use: Slide Tool Over End And Tighten Collar To Allow Access With A 3/8” Drive Extension; Adapters Can Be Used For Larger Breaker Bars/Extensions.
Convenient: Compact/Low Profile Design Means No Bulky Tool To Store; Inexpensive And Effective Way To Turn Smooth Tie Rod Ends.
Strong Grip: Tool Teeth Grip The Tie Rod Securely As You Plug In A Socket Wrench Or Breaker Bar And Turn As Necessary.
Compatible: For All Standard Tie Rods With Smooth Cylinder Ends; Will Work On Any Rod That Fits Between The 3” Top And Bottom Components With Both 9/16” Nuts Screwed On And Tightened.
Features
- Practical: Use the ABN Inner Tie Rod Tool 3/8 Inch to remove inner tie rods without having to extract outer tie rods
- Compatible: For all standard tie rods with smooth cylinder ends; Will work on any rod that fits between the 3 top and bottom components with both 9/16 nuts screwed on and tightened
- Easy to Use: Slide tool over end and tighten collar to allow access with a 3/8 drive extension; adapters can be used for larger breaker bars/extensions
- Strong Grip: Tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn as necessary
- Convenient: Compact/low profile design means no bulky tool to store; Inexpensive and effective way to turn smooth tie rod ends
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.13 x 5.88 x 4.38 Inches | Weight: 0.00 pounds
See On Amazon #30
MOOG EV800084 Steering Tie Rod End for Chevrolet Silverado 1500
Asin: B002FRXVS4 | Model: EV800084 | PartNumber: EV800084 | Ean: 0080066424835, 0080066422718 | UPC: 080066424835, 080066422718
Problem Solver Gusher Bearing -- Metal-To-Metal Design Provides Strength And Allows Grease To Flow Through Bearing Surface For Reduced Friction And Long Life.
Comprehensive Coverage -- Available For Foreign And Domestic Nameplates.
Time Savings -- Pre-Applied Thread Locking Compound Makes Installation Easier And Prevents Self-Loosening.
Easy To Install -- Wrench Flats On Housing And Stud Provide Easy Installation And Alignment Adjustment.
Rigorous Trials -- Comprehensive Evaluation Throughout Design And Development Processes By Moog Engineers For Quality You Can Count On.
Strong And Durable -- Ball Studs Are Heat Processed To Match Or Exceed Oe Requirements To Inhibit Premature Failure And Improve Fatigue Strength.
Absorbs Impact -- Belleville Preload Washer Helps Eliminate Spring Bind And Shattering During Shock Load.
Features
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TRIALS -- Comprehensive evaluation throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- TIME SAVINGS -- Pre-applied thread locking compound makes installation easier and prevents self-loosening
- See more on Amazon...
First Available: 09/26/2013
Brand: MOOG | Manufacturer: MOOG Chassis Products
Dimensions: 2.00 x 13.60 x 2.10 Inches | Weight: 1.50 pounds
See On Amazon
Looking For Something Else?
Search