Best torque converters - Buying Guide
Last Updated: 04/23/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series
Asin: B07S3TX4C5 | Model: 30 Series | PartNumber: 30 Series
Ean: 0808281948024, 0606314889531, 0808281881949, 0808281535118, 0808281601646, 0808281716371, 0808281867325
UPC: 808281601646, 808281716371, 808281881949, 808281535118, 808281948024, 606314889531, 808281867325
【Bring Your Off-Road Machine To Life】This Tav2 30 Series Go Kart Clutch Kit Fits A 3/4" Shaft And Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. It Will Work With Small Engines Producing 2-8Hp. 30 Series Asymmetrical Design..
【30 Series Toruqe Converter Belt For 6" Driven】 Length: 70.5Cm / 27.76", Outside Circumference: 27 23/64" , Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6-15/16 To 7"..
【For Your Convenience This Kit Comes With】1 X 3/4" Driver Pulley;1 X 5/8" Driver Pulley; 1 X Plastic Assy Cover;1 X Aluminum Mounting Plate;1 X Drive Belt; 1 X 10 Tooth Sprocket For #40/41/420 Chain; 1 X 12 Tooth Sprocket For #35 Chain(Chain Not Included); 1 X Full Mounting Hardware..
【A Huge Improvement Over The Old Centrifugal Clutch】This Clutch Will Help You Get More Power Out Of Your Small Engine By Reducing Engine Load. A Torque Converter Acts Similar To A Transmission, Allows Higher Speeds Out Of Your Small Engine, And Smoother Acceleration. On A Lighter Buggy Or Drift Cart Or Mini-Bike This Will Smoke Your Old Centrifugal Clutch..
【Really Wakes Up The Bike】 This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque-Converter 30 Series. It Fits All Engines With A 3/4" Straight Crankshaft. Diy Modifications To Your Mini Bike Require Some Mechanical Ability. I'm Sure You Can Do It!.
Features
- TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
- REALLY WAKES UP THE BIKE This 3/4 Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4 Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
- BRING YOUR OFF-ROAD MACHINE TO LIFE This TAV2 30 Series Go Kart Clutch Kit fits a 3/4 shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
- A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
- 30 SERIES TORUQE CONVERTER BELT FOR 6 DRIVEN Length: 70.5cm / 27.76, Outside circumference: 27 23/64 , Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6-15/16 to 7.
- FOR YOUR CONVENIENCE THIS KIT COMES WITH 1 x 3/4 Driver Pulley;1 x 5/8 Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
- See more on Amazon...
Brand: IPARTS EXPERT | Manufacturer: Coralov-US
Dimensions: 7.48 x 13.78 x 7.87 inches | Weight: 11.24 Pounds
See On Amazon #2
YOXUFA Torque Converter Motor Engine Riser Plate Hardware Kit for Predator 212cc 224cc 196cc 6.5hp Coleman CT200U BT200X Baja Warrior Massimo mb200 GX160 GX200 Engine Mini Bike Go Kart Parts
Asin: B0C7MVXWDQ | Model: YO-DZ-GX160 | PartNumber: YO-DZ-GX160
【Material】-212 Torque Converter For Predator Is Made Of Heavy-Duty Steel, The Base Plate Is Strong And Sturdy Enough To Withstand The Weight Of The Engine, And The Exterior Is Coated To Protect It From Rust And Corrosion In Wet Conditions..
【Packing】-1 * 212 Torque Converter Engine Riser Plate,1* Hardware Kit.
【Performance Upgraded】-With Locking Screws Connecting Your Engine To The Base Plate, Used On Mini Bike Or Go Kart And Making The Engine Move Back And Forth. It Can Effectively Improve The Performance Of The Engine, And Can Change From Mechanical Transmission To Infinitely Variable Speed..
【Function】-Torque Converter For Predatgor 212 Can Raises The Engine Height Off The Ground, Providing Ground Clearance For Off-Road Adventures, Reducing Vibration And Protecting The Engine. The Smooth Surface Of The Base Plate Reduces The Risk Of Damage To The Engine And Other Components..
Features
- Fitment -212cc torque converter kit for predator 212cc 224cc 196cc gx160 gx200 engine coleman baja massimo briggs stratton engine mini bike go kart. Compatibility: Coleman CT200U BT200X CT200U-ex Mini Bike, Baja Warrior MB200 Mini Bike,Massimo MB200 Mini Bike
- Function -Torque converter for predatgor 212 can raises the engine height off the ground, providing ground clearance for off-road adventures, reducing vibration and protecting the engine. The smooth surface of the base plate reduces the risk of damage to the engine and other components.
- Material -212 torque converter for predator is made of heavy-duty steel, the base plate is strong and sturdy enough to withstand the weight of the engine, and the exterior is coated to protect it from rust and corrosion in wet conditions.
- Performance Upgraded -With locking screws connecting your engine to the base plate, used on mini bike or go kart and making the engine move back and forth. It can effectively improve the performance of the engine, and can change from mechanical transmission to infinitely variable speed.
- Packing -1 * 212 Torque Converter Engine Riser Plate,1* Hardware Kit
- See more on Amazon...
Brand: YOXUFA | Manufacturer: YOXUFA
Dimensions: 1.69 x 8.66 x 6.30 inches
Warranty: 90 Days
See On Amazon #3
Vevor 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter
Asin: B019SL0LSM | Model: CVT | PartNumber: CVT | Ean: 6030563920679
Unit Replaces: This Go-Cart Torque Converter Kit Replaces Oem Part Numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, Tav2 30-75, Yelf Dog Drive Unit Q43201w.Replaces For Comet Manco Go Karts..
Complete Accessories: The Torque Converter Clutch Includes： 1X 3/4" Drive Clutch； 1X 5/8" Drive Clutch； 1 X Plastic Assy Cover；1 X Aluminum Mounting Plate；1 X Drive Belt； 1 X 10 Tooth Sprocket For #40/41/420 Chain； Full Mounting Hardware. Fully Equipped, Worry-Free Installation..
30 Series Go Kart Clutch Kit: This Kart Torque Converter Has A 3/4" And A 5/8" Drive Clutch, Suitable For All Engines With 3/4 "Straight Crankshaft.The 3/4" Drive Clutch Contains A 10 Tooth Sprocket For # 40/41 Chains.The Belt Length: 70.5Cm / 27.76", Outside Circumference: 27"（68.8Cm / 27"), Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6.7"（17Cm / 6.7")..
Features
- FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable; it can reduce the engine load and get more power..Fit Type: Vehicle Specific
- 30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4 and a 5/8 drive clutch, suitable for all engines with 3/4 straight crankshaft.The 3/4 drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76, Outside circumference: 27 68.8cm / 27), Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6.7 17cm / 6.7).
- UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.
- COMPLETE ACCESSORIES: The torque converter clutch includes 1x 3/4 drive clutch 1x 5/8 drive clutch 1 x Plastic Assy Cover 1 x Aluminum Mounting Plate 1 x Drive Belt 1 x 10 Tooth Sprocket for #40/41/420 Chain full mounting hardware. Fully equipped, worry-free installation.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
Dimensions: 8.00 x 14.00 x 8.00 inches
See On Amazon #4
FDJ Predator 212CC Torque Converter Kit 30 Series 3/4" Go Kart Mini Bike Comet Clutch Set 3/4" Inch 10T #40 or #41 Chain Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter kit
Asin: B0C3H4C81M | Model: 30 Series | PartNumber: 30 Series | Ean: 0611040615958 | UPC: 611040615958
Unit Replaces: Our Go-Cart Torque Converter Kit Replaces Oem Part Numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, Tav2 30-75, Yelf Dog Drive Unit Q43201w.Replaces For Comet Manco Go Karts..
Complete Kit: Our Kit Comes With Everything You Need For A Hassle-Free Installation, Including 1 X 3/4" Driver Pulley, 1 X 5/8" Driver Pulley, 1 X Plastic Assy Cover, 1 X Aluminum Mounting Plate, 1 X Drive Belt, 1 X 10 Tooth Sprocket For #40/41/420 Chain, 1 X 12 Tooth Sprocket For #35 Chain (Chain Not Included), And 1 X Full Mounting Hardware.".
Perfect Fit: Our 30 Series Torque Converter Belt For 6" Driven Has A Length Of 70.5Cm / 27.76", Outside Circumference Of 27 23/64", And Width Of 3/4" (1.9Cm / 0.75"). Center To Center Of Driver And Driven Is 6-15/16 To 7"..
30 Series Go Kart Clutch Kit: Our Tav2 30 Series Go Kart Clutch Kit Has A 3/4" And A 5/8" Drive Clutch, Suitable For All Engines With 3/4 "Straight Crankshaft.The 3/4" Drive Clutch Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. Its Asymmetrical Design Reduces Engine Load, Allowing Higher Speeds And Smoother Acceleration. It's A Huge Improvement Over The Old Centrifugal Clutch..
Features
- FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: Our 3/4" Torque Converter is a direct replacement kit for the popular Comet TAV2 go-kart torque-converter 30 series. It's perfect for engines with a 3/4" Straight Crankshaft and produces 2-7hp. DIY modifications to your Mini Bike require some mechanical ability.
- 30 SERIES GO KART CLUTCH KIT: Our TAV2 30 Series Go Kart Clutch Kit has a 3/4 and a 5/8 drive clutch, suitable for all engines with 3/4 straight crankshaft.The 3/4 drive clutch comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. Its asymmetrical design reduces engine load, allowing higher speeds and smoother acceleration. It's a huge improvement over the old centrifugal clutch.
- UNIT REPLACES: Our Go-Cart Torque Converter Kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.
- Perfect Fit: Our 30 Series Torque Converter Belt for 6 Driven has a length of 70.5cm / 27.76, outside circumference of 27 23/64, and width of 3/4 (1.9cm / 0.75). Center to center of driver and driven is 6-15/16 to 7.
- COMPLETE KIT: Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4 Driver Pulley, 1 x 5/8 Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
- See more on Amazon...
Brand: FDJ | Manufacturer: FDJ
Dimensions: 13.00 x 7.00 x 7.00 inches
Warranty: 3 month
See On Amazon #5
Torque Converter Motor Riser Plate Mount for Predator 196cc / 212cc Engine on Coleman Mini Bikes, Black - 1 3/4 Inch Lift
Asin: B0BX786RJ4 | Model: DAC862 | PartNumber: DAC862 | Ean: 0754003857535 | UPC: 754003857535
Easy Installation: The Included Hardware And Instructions Make Installation A Breeze, So You Can Get Back To Riding In No Time..
Enhanced Safety: With A Higher Ride Height, You'll Have Better Visibility And Be Able To Navigate Rough Terrain More Easily. Plus, The Heavy Duty Construction Of This Motor Riser Plate Provides Added Protection In Case Of A Collision Or Impact..
Custom Look: The Sleek Black Powder Coating And Sturdy Design Of This Riser Plate Add A Custom Touch To Your Coleman Mini Bike, Making It Stand Out From The Crowd..
Improved Performance: By Raising The Engine, This Riser Plate Helps Improve Performance By Providing More Torque And Power To The Rear Wheel. It Also Helps Reduce The Risk Of Damage To The Engine And Other Components By Keeping Them Higher Off The Ground..
Heavy Duty Construction: Made From 10 Gauge Thickness Steel, This Riser Plate Is Built To Withstand The Toughest Conditions. The Powder Coating Adds An Extra Layer Of Protection Against Rust And Corrosion, Ensuring Long-Lasting Durability.
Features
- Perfect fit: Designed specifically for Coleman mini bikes with 196cc/212cc engines, this motor riser plate provides a 1 3/4 inch lift, giving you the extra ground clearance you need for off-road adventures.
- Heavy duty construction: Made from 10 gauge thickness steel, this riser plate is built to withstand the toughest conditions. The powder coating adds an extra layer of protection against rust and corrosion, ensuring long-lasting durability
- Easy installation: The included hardware and instructions make installation a breeze, so you can get back to riding in no time.
- Improved performance: By raising the engine, this riser plate helps improve performance by providing more torque and power to the rear wheel. It also helps reduce the risk of damage to the engine and other components by keeping them higher off the ground.
- Enhanced safety: With a higher ride height, you'll have better visibility and be able to navigate rough terrain more easily. Plus, the heavy duty construction of this motor riser plate provides added protection in case of a collision or impact.
- Custom look: The sleek black powder coating and sturdy design of this riser plate add a custom touch to your Coleman mini bike, making it stand out from the crowd.
- See more on Amazon...
Brand: JY PERFORMANCE | Manufacturer: JY PERFORMANCE
Warranty: 1 year
See On Amazon #6
30 Series Bore GO Kart CVT Torque Converter 3/4" Bore 6" Diameter Driven Asymmetric Go Kart Mini Bike + 5/8'' Driven Clutch Comet Kit + 725 Belt
Asin: B08FG81RKR | Model: FA0016 | PartNumber: FA0016 | Ean: 6940981420425
Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201w.
Brand New High Quality 30 Series Asymmetrical Driven Clutch With 3/16'' Key Way And 3/4'' Id Hole. Package Includes: 1X 3/4" Driver Clutch ,1X 5/8" Driver Clutch ,1X 725 Belt.
Perfect Replacement Driver Clutch For Small Engines With Up To 7 Hp.
30 Series Torque Converter Driver Clutch, 3/4" Bore, Replaces Comet 219552, 5957.
Features
- Size ID 5/8'' OD 6'', It will replace Manco 5959, Comet 30 Series Drive Belt #203589, and Kartco #7628. Fits GO KARTS, MINI BIKES, DIRT BIKES, ATV'S, LAWNMOWERS, GENERATORS AND MORE.
- 30 Series Torque Converter Driver Clutch, 3/4 Bore, Replaces Comet 219552, 5957
- Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W
- Perfect replacement driver clutch for small engines with up to 7 HP
- Brand new high quality 30 series asymmetrical driven clutch with 3/16'' key way and 3/4'' ID hole. Package Includes: 1X 3/4 Driver Clutch ,1X 5/8 Driver Clutch ,1X 725 Belt
- See more on Amazon...
Brand: caqeg | Manufacturer: LucaSng caqeg
See On Amazon #7
CXRCY Torque Converter 3/4" 10T #40 41 420 and 12T #35 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement for Predator 212 Clutch Set,
Asin: B08RJFVH8F | Model: 10CCL12CL | PartNumber: 10CCL12CL
【Full-Set Equipment】This Kart Torque Converter Kit Includes The Main Parts: A 3/4" Driver Pulley And A 5/8" Driven Pulley,And Includes Other Accessories Like Drive Belt,Plastic Assy Cover,Aluminum Mounting Bracket Plate,And Full Mounting Hardware Kit..
【Attention Please!】 If You Use The Engines Of American Brand Or American Standard Shaft Thread (Unf) Such As Honda, Preditor, Or Other Not Metric Standard Thread Shaft, Please Use This Unf Screwes. If You Are Not Sure The Screw Standard, Please Use Your Hand To Install The Longest Black Screwes To Check If It Can Lock The Shaft Very Good, If It Not Workes Good Please Use The White Metric Screws In Other Bag..
【Replacement Part Number】Comet 219552A, 203814A, 219456A, 218352A, 218353A, Tav2 30-75..
【Widely Fitment&With 2 Sprockets】Recommende Predator 212Cc 6.5 Hp Go Kart Torque Converter Clutch All 2Hp-7Hp Engines,3/4" Shaft With Flat Key.You Can Use On Motorcycle,Go Kart ,Mini Vehical And Etc.Includes 1 X 12 Tooth Sprocket For #35 Chain, 1 X 10 Tooth Sprocket For #40/41/420 Chain. It Fits All Engines With A 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
Features
- High Quality Materials Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
- Widely Fitment&With 2 Sprockets Recommende predator 212cc 6.5 hp go kart torque converter clutch all 2HP-7HP engines,3/4 Shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain. It fits all engines with a 3/4 Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- Full-Set Equipment This kart torque converter kit includes the main parts: a 3/4 driver pulley and a 5/8 driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit.
- Replacement part number Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75.
- ATTENTION PLEASE! If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes. If you are not sure the screw standard, please use your hand to install the longest black screwes to check if it can lock the shaft very good, if it not workes good please use the white metric screws in other bag.
- See more on Amazon...
Brand: CXRCY | Manufacturer: FT
Dimensions: 7.80 x 9.99 x 14.00 Inches
See On Amazon #8
Complete Torque Converter for Predator 212 Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2
Asin: B07D9BNY91 | Model: GKC0003-AP | PartNumber: GKC0003-AP | Ean: 0680666155223 | UPC: 680666155223
12T Sprocket For #35 Chain And 10T Sprocket For 41/40 Chain Drive Clutch Bore 3/4"(19Mm).
Complete Torque Converter Kits Are Used In Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Waterski Winches.
Unit Replaces:Comet 218353A, 219552A, 219456A, 217610A, And 203814A Tav2 30-75.
Made Of High Quality Iron And Aluminum Material, Which Is Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation.
Features
- Torque converter for predator 212 - Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key
- Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
- 12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4(19mm)
- Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
- Complete Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- See more on Amazon...
Brand: Voltstorm
Dimensions: 7.48 x 13.39 x 7.48 Inches
See On Amazon #9
VEVOR Torque Converter CVT 2HP-7HP 3/4" Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt
Asin: B0BNN4NRFH | Model: VV-TC-1012 VV-TC-10 | PartNumber: VV-TC-1012 VV-TC-10 | Ean: 0840281575022 | UPC: 840281575022
High-Quality Drive Clutch: We Have A 3/4'' Driver Pulley And A 5/8'' Bore Driven Pulley. They Are Made Of Aluminum And Steel. And It Also Can Fit For 4-8 Hp Small Torque Converter Systems..
Complete Accessories: The Torque Converter Clutch Kit Comes With Full Accessories: 1 X 3/4" Driver Pulley. 1 X 5/8" Bore Driven Pulley. 1 X Plastic Assy Cover. 1 X Aluminum Mounting Plate. 1 X Driver Belt. 1 X Full Mounting Hardware..
High Adaptability: Compatible With 3/4" & 5/8" Straight Crankshaft. You Can Usually Use The Torque Converter On 4-8 Hp Go-Karts And Motorbikes..
Updated Durable Belt: The Go-Kart Asymmetrical Belt 669 Is One Of The Highlights For Our Torque Converter For Go-Karts. Using This Excellent Elastic Belt Properly Can Improve The Life Span Of Your Torque Converter..
Features
- TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life. It will surely take your off road adventures to new heights!
- Updated Durable Belt: The go-kart asymmetrical belt 669 is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.
- High-quality Drive Clutch: We have a 3/4'' Driver Pulley and a 5/8'' bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.
- High Adaptability: Compatible with 3/4 & 5/8 straight crankshaft. You can usually use the torque converter on 4-8 hp go-karts and motorbikes.
- Complete Accessories: The torque converter clutch kit comes with full accessories: 1 x 3/4 driver pulley. 1 x 5/8 bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #10
MOOSUN 30 Series Torque Converter Driver Clutch 3/4" Bore Go Kart for Comet 219552 5957
Asin: B07T3PK7N5 | Model: MS-16221 | PartNumber: MS-16221 | Ean: 0824006788843 | UPC: 824006788843
Featuring 6" Diameter With 3/4" Bore, 3/16" Key Way. Interchanges With Part Numbers 219552A 30 Series Torque Converter Driver Clutch. With Fine Workmanship, This Clutch Can Function Well Exactly As Same As The Original One..
Made Of High Quality Iron Material,Which Is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation. It Is The Combination Of Elegance And Easy To Use, Firmly And Securely, Guaranteeing The Safety Of Your Car..
This Driver Clutch Is Designed To Work With A Belt And Driven Pulley Assembly. It Is Produced By The Sophisticated Technology. This Clutch Will Help You Get More Power Out Of Your Small Engine By Reducing Engine Load..
Replacement For Go Karts 30 Series Engine Comet Manco, 3/4" Bore Designed For 6.5Hp 212Cc Engines. Recommended Engine: 2Hp-8Hp.
Features
- This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
- Replacement for Go Karts 30 series Engine Comet Manco, 3/4 bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
- Featuring 6 diameter with 3/4 Bore, 3/16 Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
- This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
- Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 3.19 x 5.00 x 5.00 Inches | Weight: 3.39 Pounds
See On Amazon #11
212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40/41/420 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter
Asin: B07RPMSSW8 | Model: GKC003 | PartNumber: GKC003 | Ean: 0796826367808 | UPC: 796826367808
Comet 30 Series Torque Converter Kit Bolts On To Most Engines With A Horizontal Shaft Including: Briggs, Clinton And Clones, Kohler, Lifan, Robin, And Tecumseh Motors.
Replace Part Number: Comet Tav2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75.
Comet Torque Converter Kits Are Used In Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Waterski Winches. Engagement Range Is Approximately 2350 Rpm; However, This Can Be Adjusted From Minimum 1200 Rpm - Maximum 3100 Rpm By Changing Out Springs (Not Included) And Other Adjustments.
Engine Compatability: 6.5 Hp (212Cc) Ohv Horizontal Shaft Gas Engine. 3/4"Shaft With Flat Key.
Features
- Package Included: 1 x 3/4" Driver clutch bore, 1 x Overall Diameter 6" (5/8" driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown)
- Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4shaft with flat key
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton and clones, Kohler, Lifan, Robin, and Tecumseh motors
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs (not included) and other adjustments
- Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75
- See more on Amazon...
Brand: Ameetaa | Manufacturer: Ameetaa
See On Amazon #12
Torque Converter Bolt 2307304 Kit fits for GM Torque Transformer 4L60E 4L65E 4L70E 4L80E 700R4 200-4R 3L80 4T60E 4T65E 4 Speed Overdrive M10-1.5x16 Flange Bolts LS1 LS Vortec Autom-3 pcs
Asin: B0CJJM6TQT | Model: Bolt 2307304 Kit fits | PartNumber: Bolt 2307304 Kit fits
Package Includes 3* Torque Converter Bolts 2307304, To Ensure That Your Transmission's Mounting Needs Are Met, And We Recommend That You Use Thread Locker During Installation To Prevent The Bolts From Loosening..
Please Check The Part Number And Our Fitment Info To Make Sure This Item Is Compatible With Your Vehicle Before Purchasing. Any Questions Please Contact Us Freely..
Torque Converter Bolts 2307304 By Professional Manufacturing, Stable Characteristics, High Reliability. Strict Quality Control Standards To Ensure The Highest Quality..
Torque Converters Bolts Has Heavy Duty High Strength Grade 10.9 (Same Grade As Oem Bolts) Metric Flange Bolts, Has Prevent Rust And Corrosion..
Features
- Application: This torque converter lock bolt kit is used for GM 4L60E 4L65E 4L70E 4L80E 700R4 200-4R 3L80 4T60E 4T65E 4-speed automatic transmission, and the lock plate of the torque converter is M10x1.5x16.
- Torque converters bolts has heavy duty high strength grade 10.9 (same grade as OEM bolts) metric flange bolts, has prevent rust and corrosion.
- Package includes 3* torque converter bolts 2307304, to ensure that your transmission's mounting needs are met, and we recommend that you use thread locker during installation to prevent the bolts from loosening.
- Torque converter bolts 2307304 by professional manufacturing, stable characteristics, high reliability. Strict quality control standards to ensure the highest quality.
- Please check the part number and our fitment info to make sure this item is compatible with your vehicle before purchasing. Any questions please contact us freely.
- See more on Amazon...
Brand: GEAIN | Manufacturer: GEAIN
Warranty: 1-Year Unlimited-mileage Quality Guarantee
See On Amazon #13
FVRITO Super 30 Series Torque Converter Driver Clutch for Predator 212cc 196cc 224cc Ghost 6.5hp Hemi Coleman CT200U BT200X Mini Bike CT200U-EX Baja Warior Manco KT196 Go Kart Honda Small Engines
Asin: B0CL4L5CG1 | Model: FV-LH-30 | PartNumber: FV-LH-30
Compatity:The 30 Series Driver Performance Parts Fit For All 3/4'' Bore 30 Series Torque Converter Kit And Is Compatible With The Engines Of Higher Rpm,Stage 2 Or Higher..
Note: Don't Run Without Drive Belt.This Kit Doesn't Include The 3/16'' Key.Remeber To Tight The Driver To The Engine .(Using An Impact Gun Is Effective And Reliable).
Package List：1 X 30 Series Torque Converter Driver Clutch, 1 X Drive Belt (203589/8959), 2X Gaskets.
Higher Rpm & Excellent Performance: The 30 Series Driver Has The Advantages Of Quick Acceleration(High Rpm), Smooth & Quiet Engagement(Less Belt Slip), Excellent Power Delivery(More Torque) And Easy Installation. It Improves Geater Than The Stock Driver In Terms Of Performance And Reliability.The 203589/5959 Go Kart Drive Belt Is Made Of High Quality Rubber,Having The Characteristics Of Heat And Corrosion Resistance ,Which Is Sturdy And Durable In Use And Is A Perfect Replacement When You Need..
Features
- Fitment: This super 30 series driver is designed to be used on many Mini Bikes , Go Karts and small clone engines with 3/4" bore shaft . Mini Bikes: Coleman CT200U, BT200X,CT200U-ex, Baja MB165 MB200 (Warrior,Heat, Mini Baja), Massimo MB200, Realtre* RT200, Axi* M200, Trailmaster MB200, Meg* Moto 212. Go Karts: KT196, Yerf Do*, Manco, Murray. Small Clone engines : Predator 212cc 196cc 224cc 225cc 6.5hp hemi ghost, Tillotson 212cc, Bil* Hard 212,Duroma* 7hp 212cc,Hisu* 196cc,Honda GX160 GX200.
- Higher RPM & Excellent Performance: The 30 series driver has the advantages of quick acceleration(high RPM), smooth & quiet engagement(less belt slip), excellent power delivery(more torque) and easy installation. It improves geater than the stock driver in terms of performance and reliability.The 203589/5959 go kart drive belt is made of high quality rubber,having the characteristics of heat and corrosion resistance ,which is sturdy and durable in use and is a perfect replacement when you need.
- Compatity:The 30 series driver performance parts fit for all 3/4'' bore 30 series torque converter kit and is compatible with the engines of higher RPM,stage 2 or higher.
- Package List 1 x 30 series torque converter driver clutch, 1 x drive belt (203589/8959), 2x gaskets
- Note: Don't run without drive belt.This kit doesn't include the 3/16'' key.Remeber to tight the driver to the engine .(using an impact gun is effective and reliable)
- See more on Amazon...
Brand: FVRITO | Manufacturer: FVRITO
Warranty: 90 days
See On Amazon #14
Torque Converter Go Kart Clutch Set 1" For 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series)
Asin: B08BSYWV5J | Model: MS-LHQ-004 | PartNumber: MS-LHQ-004
Comet Torque Converter Kits Are Used In Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Waterski Winches.
Driver Clutch Bore: 1"(24.5Mm),Driven Unit: Overall Diameter 6" (5/8" Driven Pulley) ,This Is A Complete Kit That Includes Both Drive And Driven Clutch Pulleys, Belt, Aluminum Engine Mount Plate, Built In Jackshaft With Sprocket, All Mounting Hardware, And Instructions. Includes Both 10T For 40/41 Chain And 12T For 35 Chain.
Comet 30 Series Torque Converter Kit Bolts On To Most Engines With A Horizontal Shaft Including: Briggs, Clinton, Honda And Clones, Kohler, Lifan, Robin, And Tecumseh Motors..
Comet Torque Converter 30 Series Small Engine Belt Drive Pulley Clutch Kit Will Help With More Take Off Power, Smoother Acceleration, Climbing Ability, And Top End Speed By Providing More Torque In The Low End And Higher Speeds In Top End..
Features
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
- Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 1(24.5mm),Driven unit: Overall Diameter 6 (5/8 driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
- See more on Amazon...
Brand: MOOSUN | Manufacturer: MOOSUN
Dimensions: 6.69 x 12.60 x 7.09 inches | Weight: 11.00 pounds
See On Amazon #15
30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4" Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589
Asin: B09J4Y3GTP | Model: 30 Series 6.5 HP 212CC 203589 | PartNumber: 30 Series 6.5 HP 212CC 203589 | Ean: 0768564477125 | UPC: 768564477125
【Wide Use--Torque Converter 3/4】: Small Engine Torque Converter Clutches Are Heavily Used In Go Karts, Mini Bikes, And Lawn Mowers.For Go Kart, Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches Etc..
【Wide Use--Go Kart Clutch Belt】:The Go-Kart Drive Belt Used On Most Manco, American Sportworks And Ken-Bar Karts With 5Hp-7Hp Engines.Also Used On The Comet Tav2 Bolt On Torque-A-Verter Kit.Center To Center Spacing For The Driver And Driven Pulley Needs To Be Between 6 5/8 Inch And 6 11/16 Inch..
【Wide Use--Torque Converter 3/4】: Small Engine Torque Converter Clutches Are Heavily Used In Go Karts, Mini Bikes, And Lawn Mowers.For Go Kart, Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches Etc..
【Torque Converter】：This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque Converter 30 Series..
Features
- 30 Series Torque Converter and Go Kart Drive Belt New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
- Torque Converter This 3/4 torque converter is a direct replacement kit for the most popular comet TAV2 go-kart torque converter 30 series.
- Wide Use--torque converter 3/4 : Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- Wide Use--torque converter 3/4 : Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- Wide Use--go kart clutch belt :The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
- See more on Amazon...
Brand: YOHIB | Manufacturer: YOHIB OEM
Dimensions: 0.35 x 2.10 x 1.10 inches
See On Amazon #16
30 Series 6.5 HP Predator 212CC 3/4" Bore Max Torque Converter Go Kart Mini Bike Driver Pulley Clutch With Comet 203589 / Manco 5959 Drive Belt
Asin: B0CKWXQ7W6 | Model: 30 Series 3/4" Bore Torque Converter | PartNumber: 30 Series 3/4" Bore Torque Converter | Ean: 0755331385417 | UPC: 755331385417
It Is Produced By Advanced Process Technology, Workmanship Is Fine, It Works The Same Principle As The Oem, With Smooth Acceleration, Climbing Ability, Providing More Torque And Higher Speed At The Low End..
Before Purchase, Please Confirm Whether The Product Is Suitable For Your Car. Three Months Have Any Problems Free Replacement, If You Have Any Questions, Please Feel Free To Contact Us, We Have A Professional After-Sales Team. I Wish You A Happy Shopping..
30 Series Torque Converter Made Of High Quality Iron Material, Which Is Lightweight, Portable, Sturdy, Wear-Resisting, Fast Heat Dissipation And With Maximum Torsion, Quality Material Firmly And Securely, Guaranteeing The Safety Of Your Car..
Feature: Featuring 6" Diameter With 3/4" Bore, 3/16" Key Way Replacement Comet Manco 212Cc 2-8 Hp Engine, Replace Manco 5959 / Comet 203589..
Features
- Widely used: 30 series torque converter compatible with Manco Go Karts, Mini Bike, Lawnmower, Small tractors, Fun Kart, Golf Karts, Mini choppers, ATV, Motorcycles etc. Fits for all engines with a 3/4" straight crankshaft.
- Feature: Featuring 6 diameter with 3/4 bore, 3/16 key way replacement Comet Manco 212CC 2-8 hp engine, replace Manco 5959 / Comet 203589.
- It is produced by advanced process technology, workmanship is fine, it works the same principle as the OEM, with smooth acceleration, climbing ability, providing more torque and higher speed at the low end.
- 30 series torque converter made of high quality iron material, which is lightweight, portable, sturdy, wear-resisting, fast heat dissipation and with maximum torsion, quality material firmly and securely, guaranteeing the safety of your car.
- Before purchase, please confirm whether the product is suitable for your car. Three months have any problems free replacement, if you have any questions, please feel free to contact us, we have a professional after-sales team. I wish you a happy shopping.
- See more on Amazon...
Brand: ANOWDECO | Manufacturer: ANOWDECO
Dimensions: 2.10 x 1.09 x 0.35 inches
Warranty: 1 year
See On Amazon #17
Torque Converter 30 Series Mini Bike 2HP-7HP Go Kart Clutch 1 inch 10T #40#41#420 & 12T #35 Chain Predator Drive Belt Pulley Replace for Manco Comet 218354A,203603A,219456A,218355A,219554A,TAV2
Asin: B0BGLCDWP1 | Model: TOC002 | PartNumber: TOC002
【Belt For 6” Driven】: Center To Center Of Driver And Driven: 6-15/16 To 7”. Length: 27.76” (70.5Cm), Width:3/4” (1.9Cm), Outside Circumference:27-23/64”..
【Compatible】Comet Torque Converter Kits Are Fit For Small Vehicles, Small Tractors, Riding Lawnmowers, Go Karts, Mini Choppers, Mini Bikes, Motorcycles, Atv And Waterski Winches. The Engagement Range Of This Kit Is Approximately 2350±200 Rpm..
【Package Include】:2 Sprocket Teeth: 10 Tooth Sprocket For #40 #41 #420 Chain And 12 Tooth Sprocket For #35 Chain. Driven Unit: Overall Diameter 6"(5/8" Driven Pulley), Driver Clutch Bore: 1". And Also Include Belt, Aluminum Engine Mount Plate, Built In Jackshaft With Sprocket(Chain Not Included), Full Mounting Hardware Kit ..
【Premium Materials】Engine Compatibility: 1" Straight Crankshaft, 2Hp-7Hp(Max 8Hp) Engine. It Is Made Of Premium Iron And Aluminum To Make Sure It Can Be Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat..
Features
- Torque Converter Clutch Kit : SEHNSUCHT 1 Torque Converter is designed to replacement for fit all models of Comet TAV2 for 218354A, 203603A, 219456A, 218355A, 219554A, TAV2 30-100. You can use it on all engines with 1 straight crankshaft, and it can also replace for Comet Manco Go Karts.
- Premium Materials Engine Compatibility: 1 straight crankshaft, 2HP-7HP(max 8HP) Engine. It is made of premium iron and aluminum to make sure it can be sturdy, durable, maximum torque, wear-resisting and fast heat.
- Belt for 6 Driven : Center to center of driver and driven: 6-15/16 to 7 . Length: 27.76 (70.5cm), width:3/4 (1.9cm), outside circumference:27-23/64 .
- Package Include :2 sprocket teeth: 10 tooth sprocket for #40 #41 #420 chain and 12 tooth sprocket for #35 chain. Driven unit: overall diameter 6(5/8 driven pulley), Driver clutch bore: 1. And also include belt, aluminum engine mount plate, built in jackshaft with sprocket(Chain not included), full Mounting Hardware Kit .
- Compatible Comet torque converter kits are fit for small vehicles, small tractors, riding lawnmowers, go karts, mini choppers, mini bikes, motorcycles, ATV and waterski winches. the engagement range of this kit is approximately 2350 200 RPM.
- See more on Amazon...
Brand: SEHNSUCHT | Manufacturer: SEHNSUCHT
See On Amazon #18
BDFHYK Flexplate Adapter Spacer LS Swap Torque Stall Converter Hub Crankshaft Adapter Compatible with TH350 TH400 Transmission
Asin: B08BCBS947 | Model: DP06-SI | PartNumber: DP06-SI
✔️【Easy Installation】Ls Adapter Sleeves Allow You To Bolt A Gm Automatic Transmission To An Engine Or An Older Gm Automatic Transmission To An Ls-Series Engine. These Adapter Sleeves Insert Into The Crankshaft Flange With No Modifications, Giving You The Correct Distance And Pilot Size..
👍【The Best】Bdfhyk Values Your Shopping Experience, If You Encounter Any Problems With The Ls Flexplate Adapter, Please Tell Us. We Provide 24-Hour Mail Service And Will Help You As Soon As Possible..
🚗【Attention】Use Of This Ls Flexplate Adapter Keeps You From Possibly Damaging The Input Shaft Of Your Transmission When Doing A Transmission Swap. Pilot Bushing Bore Changes And Flexplate/Flywheel Configurations Play An Important In Interchange..
✔️【Stable & Good Ductility】Crankshaft Adapter Has Good Ductility, Conduction And Thermal Conductivity, And Has Strong Ferromagnetic. Stable Characteristics, High Reliability. Perfect Match For The Original Car..
Features
- PREFECT DESIGNED Flexplate Adapter Spacer compatible with GM LS series Xtreme Duty Flexplate with a 4mm thick centerplate, to GM automatic transmission For 1998-2004 LS based engines using a TH350 or TH400 transmission.
- STABLE & GOOD DUCTILITY Crankshaft adapter has good ductility, conduction and thermal conductivity, and has strong ferromagnetic. Stable characteristics, high reliability. Perfect match for the original car.
- EASY INSTALLATION Ls Adapter sleeves allow you to bolt a GM automatic transmission to an engine or an older GM automatic transmission to an LS-series engine. These adapter sleeves insert into the crankshaft flange with no modifications, giving you the correct distance and pilot size.
- ATTENTION Use of this ls flexplate adapter keeps you from possibly damaging the input shaft of your transmission when doing a transmission swap. pilot bushing bore changes and flexplate/flywheel configurations play an important in interchange.
- THE BEST BDFHYK values your shopping experience, If you encounter any problems with the LS flexplate adapter, please tell us. We provide 24-hour mail service and will help you as soon as possible.
- See more on Amazon...
Brand: BDFHYK | Manufacturer: BDFHYK
See On Amazon #19
30 Series 6.5 hp Go Kart Torque Converter kit, 3/4" Bore Mini Bike Clutch Driver Pulley Compatible with 212CC Predator Comet Manco Max Torque - 212cc Tourque Converter Clutch Drive Pulley
Asin: B0BCHVNB4Y | Model: 6.5 HP Torque Converter | PartNumber: 6.5 HP Torque Converter
☞【Specification】3/4" Bore Designed For 6.5Hp 212Cc Engines. This Is A Brand New Aftermarket 30 Series 6.5 Hp Go Kart Torque Converter With 3/4'' Id Hole. 3/4" Shaft Bore. Works With 2Hp -8Hp Engines.
☞[Examination And Confirmation] Please Check And Confirm Compatibility Before Purchasing. Three Months Of Guarantee, If You Have Any Questions, Please Contact Us. Happy Shopping.
☞【High-Quality Torque Converter Clutch】- Go Kart Torque Converter Kit Is Made Of High Quality Iron Material, Which Is Lightweight, Portable, Sturdy, Wear-Resisting, Fast Heat Disaipation And With Maximum Torsion. 30 Series Torque Converter Kit Is The Combination Of Elegance And Easy To Use, Firmly And Securely, Guaranteeing The Safety Of Your Car.
☞【Widely Used】- 30 Series 6.5 Hp Go Kart/Mini Bike Torque Converter Clutch Driver, Compatible With Comet, Manco Go Karts. For Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches. 30 Series Torque Converter Clutch Fits For All Engines With A 3/4" Straight Crankshaft.
Features
- Function of 30 Series Torque Converter Clutch - Torque Converter is produced by complex technology. The role of a torque converter is similar to the transmission, which can increase higher speed from small engines. The replacement of 212cc predator torque converter kit will help obtain more detachment from power supply by providing more torque and higher speed at low-end, smoother acceleration, climbing ability and maximum speed
- Widely Used - 30 series 6.5 hp go kart/mini bike torque converter clutch driver, Compatible with Comet, Manco Go Karts. For Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches. 30 series torque converter clutch fits for all engines with a 3/4 Straight Crankshaft
- Specification 3/4 bore designed for 6.5hp 212CC engines. This is a brand new aftermarket 30 series 6.5 hp go kart torque converter with 3/4'' ID hole. 3/4 shaft bore. Works With 2HP -8HP Engines
- High-quality Torque Converter Clutch - Go kart torque converter kit is made of high quality iron material, which is lightweight, portable, sturdy, wear-resisting, fast heat disAipation and with maximum torsion. 30 series torque converter kit is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car
- [Examination and confirmation] Please check and confirm compatibility before purchasing. Three months of guarantee, if you have any questions, please contact us. Happy shopping
- See more on Amazon...
Brand: IVONNEY | Manufacturer: IVONNEY
Warranty: 3 months
See On Amazon #20
Dorman 926-378 Transmission Torque Converter Clutch Solenoid Compatible with Select Chrysler / Dodge / Ram Models
Asin: B08WZ1T4S3 | Model: 926-378 | PartNumber: 926-378 | Ean: 0037495933513 | UPC: 037495933513
Durable Construction - This Part Is Made From Quality Materials To Ensure Reliable Performance And A Long Service Life.
Ensure Fit - To Make Sure This Part Fits Your Exact Vehicle, Input Your Make, Model And Trim Level Into The Garage Tool.
Trustworthy Quality - Backed By A Team Of Product Experts In The United States And More Than A Century Of Automotive Experience.
Ideal Solution - This Solenoid Is A Reliable Replacement For An Original Part That Has Failed Due To Wear Or Fatigue.
Features
- Direct replacement - this torque converter clutch, or TCC, solenoid matches the fit and function of the factory part on specified years, make and models
- Ideal solution - this solenoid is a reliable replacement for an original part that has failed due to wear or fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- See more on Amazon...
Brand: Dorman | Manufacturer: Dorman Products
Dimensions: 3.00 x 3.00 x 3.00 Inches | Weight: 0.16 pounds
Warranty: Limited Lifetime
See On Amazon #21
Dorman 926-408 Torque Converter Lock-Up Solenoid Compatible with Select Subaru Models (OE FIX)
Asin: B0BT5LVMQ9 | Model: 926-408 | PartNumber: 926-408 | Ean: 0037495934374 | UPC: 037495934374
Restores Function - When Properly Installed, This Solenoid Can Help Clear Check Engine Light With Trouble Code P2763.
Ensure Fit - To Make Sure This Part Fits Your Exact Vehicle, Input Your Make, Model And Trim Level Into The Garage Tool.
Trustworthy Quality - Designed In The United States And Backed By More Than A Century Of Automotive Aftermarket Excellence.
Ideal Replacement - Engineered To Precise Specifications And Designed To Match The Fit And Function Of The Original Equipment Solenoid On Specified Subaru Vehicles.
Features
- Saves money - this automatic transmission control solenoid allows replacement of just the solenoid instead of the entire valve body assembly, saving significant expense
- Ideal replacement - engineered to precise specifications and designed to match the fit and function of the original equipment solenoid on specified Subaru vehicles
- Restores function - when properly installed, this solenoid can help clear check engine light with trouble code P2763
- Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- See more on Amazon...
Brand: Dorman | Manufacturer: Dorman Products
Dimensions: 2.28 x 2.87 x 2.28 inches | Weight: 0.10 pounds
Warranty: Limited Lifetime
See On Amazon #22
212CC Torque Converter Kit 30 Series 6.5 HP 3/4" Go Kart Mini Bike Clutch 10T 40/41 &12T 35 Chain Predator Driver Pulley Replacement Set for Manco Comet TAV2 Clutch Small Engine Drive Belt
Asin: B0D22KKYFM | Model: KART01 | PartNumber: KART01
【Replacement Part Number】 Engine Compatability: 6.5 Hp (212Cc) Ohv Horizontal Shaft Gas Engine. This 3/4" Torque Converter Is A Direct Replacement Fits All Models Of Comet Tav2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A, Tav2 30-75. It Fits All Engines With A 3/4" Straight Crankshaft. Replaces For Comet Manco Go Karts.
【Full Set Equipment】1 X 3/4" Driver Pulley;1 X 5/8" Driver Pulley; 1 X Plastic Assy Cover;1 X Aluminum Mounting Plate;1 X Drive Belt; 1 X 10 Tooth Sprocket For #40/41/420 Chain; 1 X 12 Tooth Sprocket For #35 Chain(Chain Not Included); 1 X Full Mounting Hardware.
【Toruqe Converter Belt For 6" Driven】 Length: 70.5Cm / 27.76", Outside Circumference: 27 23/64" , Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6-15/16 To 7".
【30 Series Go Kart Clutch Kit】Made Of High Quality Iron And Aluminum Material, Which Is Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation 30-75. This Tav2 30 Series Go Kart Clutch Kit Has A 3/4" And A 5/8" Drive Clutch, Suitable For All Engines With 3/4 " Straight Crankshaft.The 3/4" Drive Clutch Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. Its Asymmetrical Design Reduces Engine Load, Allowing Higher Speeds And Smoother Acceleration. It's A Huge Improvement Over The Old Centrifugal Clutch.
Features
- Modification Compatible For Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Fits for modification replacements
- 30 Series Go Kart Clutch Kit Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75. This TAV2 30 Series Go Kart Clutch Kit has a 3/4 and a 5/8 drive clutch, suitable for all engines with 3/4 straight crankshaft.The 3/4 drive clutch comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. Its asymmetrical design reduces engine load, allowing higher speeds and smoother acceleration. It's a huge improvement over the old centrifugal clutch
- Replacement Part Number Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. This 3/4 Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75. It fits all engines with a 3/4 Straight Crankshaft. Replaces for Comet Manco Go Karts
- Toruqe Converter Belt for 6 Driven Length: 70.5cm / 27.76, Outside circumference: 27 23/64 , Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6-15/16 to 7
- Full Set Equipment 1 x 3/4 Driver Pulley;1 x 5/8 Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware
- See more on Amazon...
Brand: Awasdday | Manufacturer: Awasdday
Weight: 13.22 Pounds
Warranty: 12M
Amazon Price: $69.99 | as of 04/23/2024
(10:09am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #23
30 Series 6.5 HP Go Kart Torque Converter Clutch Driver Pulley Replacement for Comet Manco 212CC 3/4" Bore Mini Bike Clutch Torque
Asin: B0D22L7DDY | Model: KART02 | PartNumber: KART02
【Torque Converter】Featuring 6" Diameter With 3/4" Bore, 3/16" Key Way. This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque Converter 30 Series.
【Wide Use】30 Series 6.5 Hp Go Kart/Mini Bike Torque Converter Clutch Driver, Compatible With Comet, Manco Go Karts. For Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches. 30 Series Torque Converter Clutch Fits For All Engines With A 3/4" Straight Crankshaft.
【High Quality Torque Converter Clutch】Go Kart Torque Converter Kit Is Made Of High Quality Iron Material, Which Is Lightweight, Portable, Sturdy, Wear-Resisting, Fast Heat Disaipation And With Maximum Torsion. 30 Series Torque Converter Kit Is The Combination Of Elegance And Easy To Use, Firmly And Securely. Replacement 30-75 Driver Pulleys Will Help With More Take Off Power, Smoother Acceleration, Climbing Ability, And Top End Speed By Providing More Torque In The Low End, And Higher Speeds In Top End.
【Interchanges Part Numbers 】219552A. 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, With 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
Features
- Replacement for 30 Series Torque Converter New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP
- Interchanges Part Numbers 219552A. 30 Series Torque Converter Driver Clutch.3/4 Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589
- Torque Converter Featuring 6 diameter with 3/4 Bore, 3/16 Key way. This 3/4 torque converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series
- High Quality Torque Converter Clutch Go kart torque converter kit is made of high quality iron material, which is lightweight, portable, sturdy, wear-resisting, fast heat disAipation and with maximum torsion. 30 series torque converter kit is the combination of elegance and easy to use, firmly and securely. Replacement 30-75 Driver Pulleys will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end, and higher speeds in top end
- Wide Use 30 series 6.5 hp go kart/mini bike torque converter clutch driver, Compatible with Comet, Manco Go Karts. For Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches. 30 series torque converter clutch fits for all engines with a 3/4 Straight Crankshaft
- See more on Amazon...
Brand: Awasdday | Manufacturer: Awasdday
Dimensions: 3.00 x 5.00 x 5.00 inches | Weight: 3.50 Pounds
Warranty: 12M
Amazon Price: $39.99 | as of 04/23/2024
(10:09am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #24
Car Trunk Lid Spring Metal Spring Lifting Device Trunk Spring For Cars Trunk Spring Tool Lifter Automatically Open Tool Trunk Spring Lifting Device Car Trunk Lid Spring Metal Spring Lifting Device
Asin: B0D2CYGWQR | Ean: 7629051024365
The Car Trunk Lid Spring Is Only Suitable For Sedan With No Hydraulic Lever In Lid. It Is Not Suitable For Hatchback Suv With Hydraulic Lever In Lid..
The Car Trunk Lid Spring Is Easy To Use After Installation, Just Press It Lightly, Open Button..
The Car Trunk Lid Spring Is Alloy Steel Metal, And Corrosion-Resistant, Trunk Spring Tool Has A Longer Service Life..
The Car Trunk Lid Spring Is Easy To Install. Adjust The Screws On The Spring According To The Size Of Of Different Models To Facilitate The Installation Achieve The Best Opening And Closing.
Features
- The unique design of The car trunk lid spring, full screw adjustment, anti-breaking tapered limit, reinforced spring hanging adjustable force design.
- The car trunk lid spring is easy to install. Adjust the screws on the spring according to the size of of different models to facilitate the installation achieve the best opening and closing
- The car trunk lid spring is only suitable for sedan with no hydraulic lever in lid. It is not suitable for hatchback SUV with hydraulic lever in lid.
- The car trunk lid spring is alloy steel metal, and corrosion-resistant, trunk spring tool has a longer service life.
- The car trunk lid spring is easy to use after installation, just press it lightly, open button.
- See more on Amazon...
Brand: GRABLOOM | Manufacturer: GRABLOOM
See On Amazon #25
CARTEX Torque Converter 04/600786 04/600581 Fits JCB Loader 215E 215S 217S 3CX 3CX-2 3CXS 4CX444
Asin: B0D29XN84V
We Believe Precision Engineering Meets Unparalleled Quality..
Questions? : We At Cartex - High Quality Parts Usa Has More Than 40 Years Of Experience In Industry And Has In-House Technicians, If You Are Not Sure If This Part Fits Your Machine Or Tractor, Just Send Us An Email Before You Make The Purchase And Our In House Technicians Will Revert Back To You, Right Away..
Quality Parts, Superior Performance - It's Not Just A Promise, It's Our Standard.
Order Your High Quality Part With Peace Of Mind, Knowing We Prioritize Your Satisfaction..
Features
- Replace Part Number: 04/600786, 04/600580, 04/600784, 04-600786, 04-600580, 04-600784, 04600786, 04600580, 04600784
- Order your High Quality Part with peace of mind, knowing we prioritize your satisfaction.
- We believe Precision Engineering meets Unparalleled Quality.
- Quality Parts, Superior Performance - it's not just a promise, it's our standard
- QUESTIONS? : We at CARTEX - High Quality Parts USA has more than 40 years of experience in industry and has in-house technicians, If you are not sure if this part fits your machine or tractor, just send us an email before you make the purchase and our in house technicians will revert back to you, right away.
- See more on Amazon...
Brand: CARTEX | Manufacturer: CARTEX - HIGH QUALITY PARTS USA
See On Amazon #26
CARTEX Torque Converter 03/300001 Fits JCB Backhoe Loader 2CX 2CXSL 4C 3C-2WD 3CX444 4CN444
Asin: B0D26796WN
We Believe Precision Engineering Meets Unparalleled Quality..
Questions? : We At Cartex - High Quality Parts Usa Has More Than 40 Years Of Experience In Industry And Has In-House Technicians, If You Are Not Sure If This Part Fits Your Machine Or Tractor, Just Send Us An Email Before You Make The Purchase And Our In House Technicians Will Revert Back To You, Right Away..
Quality Parts, Superior Performance - It's Not Just A Promise, It's Our Standard.
Order Your High Quality Part With Peace Of Mind, Knowing We Prioritize Your Satisfaction..
Features
- Replace Part Number: 03/300001, 03-300001, 03300001, 03/300001R, 03-300001R, 03300001R, 04/500600, 04500600, 04-500600, 04/500600R, 04500600R, 04-500600R
- Order your High Quality Part with peace of mind, knowing we prioritize your satisfaction.
- We believe Precision Engineering meets Unparalleled Quality.
- Quality Parts, Superior Performance - it's not just a promise, it's our standard
- QUESTIONS? : We at CARTEX - High Quality Parts USA has more than 40 years of experience in industry and has in-house technicians, If you are not sure if this part fits your machine or tractor, just send us an email before you make the purchase and our in house technicians will revert back to you, right away.
- See more on Amazon...
Brand: CARTEX | Manufacturer: CARTEX - HIGH QUALITY PARTS USA
See On Amazon #27
Knwigoe 40 Series Torque Converter Clutch Pulley Driver Replacement Go Kart Frames No Engine Fits for All 8-18hp Engines Motors Predator Lawn Mover Tractor
Asin: B0D22NKKV4 | Model: 40 Series | PartNumber: 40 Series
[Easy Installation] The Kit Includes Everything Needed To Install The Torque Converter, Simplifying The Conversion Process. In Addition, The Sturdy And Unbreakable Belt Ensures A Secure Fit For Worry-Free Operation..
[Go Kart 40 Series Torque Converter Kit ]It Is The First Choice For Go-Kart, Mini-Bike, Drift Car, Scooter, Golf Cart And All-Terrain Vehicle Engine.
[Wide Compatibility]The Torque Converter Can Be Used On All 8Hp-16Hp Engines With 1-Inch Straight Crankshafts And 1/4-Inch Keyways, Such As For Comet 209133 Manco 2432, Predator 420Cc, Honda Gx 340/390, Briggs Straton Vanguard V-Twins, And More. ..
[Optimal Material] The Go Kart 40 Series Torque Converter Is Made Of High Quality Iron Material For Durability..
Features
- [Enhanced Power] Cars equipped with the Kart 40 series torque converter kit can increase power, reduce engine load, and can provide smoother acceleration. In addition, the torque converter kit utilizes a high-speed conversion ratio to effectively increase vehicle speed and improve hill climbing ability.
- [Optimal Material] The Go Kart 40 Series Torque Converter is made of high quality iron material for durability.
- [Easy Installation] The kit includes everything needed to install the torque converter, simplifying the conversion process. In addition, the sturdy and unbreakable belt ensures a secure fit for worry-free operation.
- [Wide Compatibility]The torque converter can be used on all 8hp-16hp engines with 1-inch straight crankshafts and 1/4-inch keyways, such as for Comet 209133 Manco 2432, Predator 420CC, Honda GX 340/390, Briggs Straton Vanguard V-Twins, and more. .
- [go kart 40 series torque converter kit ]It is the first choice for go-kart, mini-bike, drift car, scooter, golf cart and all-terrain vehicle engine
- See more on Amazon...
Brand: Knwigoe | Manufacturer: Knwigoe
Warranty: 1 year warranty against manufacturer defects
See On Amazon #28
TOTMOX Torque Converter Metric Bolt Kit Compatible with GM 4L60E 4L65E 4L70E 4L80E 700R4 200-4R 3L80 4T60E 4T65E 4 Speed Overdrive M10-1.5x16 Flange Bolts LS1 LS Vortec Automatic
Asin: B093Q275QJ | Model: DB00186_01 | PartNumber: DB00186_01
▶Strong Adaptability:The Flange Screw Has A Good Retraction Effect, Is Suitable For Anti-Vibration, And Is Easy To Adjust The Position Of The Gap Or Torque..
▶ All Of Our Products Are Subject To Strict Quality Control. If There Are Quality Problems Or You Are Not Satisfied With The Products, Please Contact Us. We Offer You The Best Solution..
▶Application:Very Suitable For Indoor Renovation, Mechanical Installation Of Communication Equipment And Ship Assembly.
▶These Are Heavy Duty High Strength Grade 10.9 (Same Grade As Oem Bolts) Metric Flange Bolts Clear Zinc Coated To Prevent Rust And Corrosion..
Features
- Comes with 6ea Grade 10.9 Flange Hex Head bolts M10-1.5X16MM Clear zinc to keep them from rusting or corroding (Some transmissions will only use 3ea). We recommend you use thread locker on these when installing.
- These are Heavy Duty High Strength Grade 10.9 (Same Grade as OEM bolts) metric flange bolts Clear Zinc Coated to prevent rust and corrosion.
- Strong Adaptability:The flange screw has a good retraction effect, is suitable for anti-vibration, and is easy to adjust the position of the gap or torque.
- Application:Very suitable for indoor renovation, mechanical installation of communication equipment and ship assembly
- All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution.
- See more on Amazon...
Brand: TOTMOX | Manufacturer: TOTMOX
See On Amazon #29
NEW 35mm PULLER for CLUTCH TORQUE CONVERTER REPLACEMENT HONDA 07933-HA8000 Fits Big Red 680
Asin: B08K752WHH | Ean: 0726972575376 | UPC: 726972575376
35Mm Threaded Puller Tool For Centrifugal One-Way Clutch Weight Assembly Drum Removal And Torque Converter Removal Service - See Photos For Example Of Use.
Fits: Rincon 650 And 680 All Years; Big Red 680 All Years,And Others.
Make Sure You Measure The Hole Where This Tool Needs To Screw On. This Is A 35Mm Id Tool. If The Hole On Your Part Where This Tool Needs To Fit Is Not Close To 35Mm This Is Not The Tool For Your Application..
This Is A Special Tool Designed To Remove The Torque Converter On Honda 4-Wheelers..
Features
- NEW 35mm PULLER for CLUTCH TORQUE CONVERTER REPLACEMENT HONDA 07933-HA8000 Fits Big Red 680
- This is a special tool designed to remove the torque converter on Honda 4-Wheelers.
- 35mm Threaded Puller Tool for Centrifugal One-Way Clutch Weight Assembly Drum Removal and Torque Converter Removal Service - See photos for example of use
- Make sure you measure the hole where this tool needs to screw on. This is a 35mm ID tool. If the hole on your part where this tool needs to fit is not close to 35mm this is not the tool for your application.
- Fits: Rincon 650 and 680 All Years; Big Red 680 All Years,And Others
- See more on Amazon...
Brand: bokop | Manufacturer: bokop
Weight: 1.57 Pounds
See On Amazon #30
TH-350-C/700/400/200, 4L60, 4L60E,4L80E, 3L80 Torque Converter Bolts (Screws) Heavy-Duty. B78
Asin: B07D55G97Y | Model: B-78K-6 | PartNumber: B-78K-6
Metric Dimensions: M10-1.50 X 15Mm. Grade: 9.8 (Heavy Duty) Made In The Usa From, Heat-Treated, Hardened Alloy Steel.
Fits Models: 125C, 180C, 200C, 440-R4, 700-R4 (S-10 Only) Allison At540, 310Mm, Th400 3L80 Th350/Th350c (Th-350 Th-350C) 1969-86 Th700-R4 (Th-700R4)1982-93 Th400 Th375 Th475 Rwd (Th 400 ). 1964-98 Th180 Th180c (Th-180 Th-180C)1969-Up Th200-Th200c Th-200-Th-200C 1976-87 Th200-4R (Th-2004R)1981-90 Th250c (Th-250C) 4L80e 1991-Up 4L60e 1993-Up 4L65e 2001-Up 4L30e 1990-Up 5L40e 1999-Up. Flexplate / Flywheel.
Fits The Following Transmission Torque Converter Applications: Buick, Cadillac, Chevy, Gmc, Pontiac, Oldsmobile, Hummer, Bmw, Acura, Isuzu General Motors 298Mm Lockup, 250C, 350C, 700-R4, 4L60e General Motors 300Mm Lockup, 4L60e Gm 310Mm Lockup, 4L80e Single Stator And Dual Stator 310Mm Lockup, 4L80e Late (Single Stator) Th350 (Includes Th300) Th400 3L80, Allison At540, 310Mm 245Mm Lockup,.
Includes 6 Hex-Head Bolts. These Bolt Kits Are The Strongest Bolts You Can Get To Attach Your Torque Converter And Are Used In Competitions. The Bolts Are Fully Heat Treated Prior To Thread Rolling And Machining..
Features
- Industry Part ID: 01261968, B78, B-78, 4040, M464GE, 65998
- Includes 6 hex-head bolts. These bolt kits are the strongest bolts you can get to attach your torque converter and are used in competitions. The bolts are fully heat treated prior to thread rolling and machining.
- Metric Dimensions: M10-1.50 x 15mm. Grade: 9.8 (Heavy Duty) Made in the USA from, Heat-Treated, hardened alloy steel
- Fits the following Transmission Torque Converter Applications: Buick, Cadillac, Chevy, GMC, Pontiac, Oldsmobile, Hummer, BMW, Acura, Isuzu General Motors 298mm Lockup, 250C, 350C, 700-R4, 4L60E General Motors 300mm Lockup, 4L60E GM 310mm Lockup, 4L80E Single Stator And Dual Stator 310mm Lockup, 4L80E Late (Single Stator) TH350 (Includes TH300) TH400 3L80, Allison AT540, 310mm 245mm Lockup,
- Fits Models: 125C, 180C, 200C, 440-R4, 700-R4 (S-10 Only) Allison AT540, 310mm, TH400 3L80 TH350/TH350C (TH-350 TH-350C) 1969-86 TH700-R4 (TH-700R4)1982-93 TH400 TH375 TH475 RWD (TH 400 ). 1964-98 TH180 TH180C (TH-180 TH-180C)1969-Up TH200-TH200C TH-200-TH-200C 1976-87 TH200-4R (TH-2004R)1981-90 TH250C (TH-250C) 4L80E 1991-Up 4L60E 1993-Up 4L65E 2001-Up 4L30E 1990-Up 5L40E 1999-Up. Flexplate / Flywheel
- See more on Amazon...
Brand: Tri Component | Manufacturer: Tri Component
Weight: 0.05 pounds
Warranty: 12 month manufacturer's replacement warranty for defective items purchased. Please contact us if you are not 100% satisfied with your purchase and we will do our best to resolve. Full refund provided upon safe return of the item.
See On Amazon
Looking For Something Else?
Search