Best gas welding hoses - Buying Guide
Last Updated: 04/25/2024
Share on
Bestselling gas welding hoses on Amazon
- Hromee Oxygen Acetylene Hose 1/4-Inch 50 Feet with 9/16"-18 B fittings Welding Cutting Torch Twin Hose
- YOTOO Heavy Duty Oxygen Acetylene Hose, Torch Hose 1/4-Inch 25 Feet with 9/16"-18 B fittings Weldi...
- Hromee Welding Hose Coupler Adapter Set 9/16"-18 LH&RH for Oxygen Acetylene Twin Hose
- Hromee Oxygen Acetylene Hose 1/4-Inch 25 Feet with 9/16 -18 B fittings Welding Cutting Torch Twin Hose
- ABN Oxy Acetylene Hose, 50 Foot x 1/4 Inch - B Fitting Twin Cutting Torch Hose for Welding
- OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8" UNF-18...
- TT FLEX Gas Connector Kit, Gas Hose Gas Line for Gas Water Heater, Stove, Dryer, 48 Inch Stainless S...
- Grehitk Flexible Gas Line Connector for Dryer(3/4-36inch), Gas Hose Connector Kit for Stove, Water H...
- Master Elite 25 Foot Oxygen Acetylene Hose Twin Welding Hose Set, 1/4 Inch B Fittings, 9/16 -18 - Ox...
- Flowmeter Hose with 5/8"-18 Male Connectors - 5 Feet Long
#1
Hromee Oxygen Acetylene Hose 1/4-Inch 50 Feet with 9/16"-18 B fittings Welding Cutting Torch Twin Hose
Asin: B096ZPGK9H | Model: HR4071 | PartNumber: HR4071
High Quality Rubber: Hromee Oxygen Acetylene Hose Is Made Of Acetylene Rubber For Maximum Flexibility Which Is Easy To Store On Reels And Also Helps Increase The Durability And Resistance To Kink. Other Than These, It Also Can Stay Flexible In Extreme Temperature. All These Make It Ideal For Long Term Use..
B Fittings: We Equipment B Fittings In Both Ends Which Fits For Most Welding Torch And Regulators. Fitting Sizes: 9/16"-18 Lh And 9/16"-18 Rh..
Color-Coded: Red And Green Two Different Colors Make You Distinguish Them Easily And Allow For Safe And Accurate Connections. Always Be Keen On The Color-Coding To Ensure You Know Exactly How To Put The Connections During Use..
1/4” × 50Ft: The Length Of Each Welding Hose Is 50 Feet. It Is Long Enough For Daily Life Use Or Industry And Agriculture Use. The Inner Diameter Of Hose Is 1/4 Inch(6.3Mm) Which Supply Optimal Flow Rate In The Maximum Pressure Of 300 Psi (20Bar)..
Features
- TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R.
- 1/4 50FT: The length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar).
- HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these make it ideal for long term use.
- COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use.
- B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16-18 LH and 9/16-18 RH.
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 4.30 x 9.50 x 9.50 inches | Weight: 10.30 Pounds
Warranty: Manufacturer warranty for 1 Year from the day of purchase
See On Amazon #2
YOTOO Heavy Duty Oxygen Acetylene Hose, Torch Hose 1/4-Inch 25 Feet with 9/16"-18 B fittings Welding Cutting Twin Welding Hose Grade R
Asin: B0BY8HZ1L2
Come With Standard Size B Threaded Fittings And Bend Restrictors: The Fitting Sizes Are 9/16"-18 Lh Left-Hand Thread For The Red Acetylene Hose And 9/16"-18 Rh Right-Hand Thread For The Green Oxygen Hose, Which Enables The Hoses To Connect Onto Existing Standard Regulators And Torches. Bend Restrictors Reduce Kinking And Help To Increase The Life Of The Acetylene / Oxygen Torch Hose.
Widely Use: This Flexible Twin Hose Set Designed For Transporting Oxygen And Acetylene Gases To Your Welding Torch, Brazing, Soldering, And Cutting Equipment. These R-Grade Long-Lasting Hoses Are Ideal To Use While Working On All Of Your Metalworking Projects. We Warranty This Twin Hose For One Year. If Any Problems, Please Contact Us..
Color-Coded: Red And Green Twin Hoses Provide A Color-Coding System To Hook Up To Your Regulator And Oxy Torch Kit Safely. Always Be Keen On The Color-Coding To Ensure You Know Exactly How To Put The Connections During Use..
High Strength: This Spiral Synthetic Yarn Reinforced Rubber Oxygen Hose And Acetylene Gas Hose Is 1/4 Inch Inner Diameter By 25 Feet Long Delivers Up To 300 Psi For Maximum Working Pressure, 1200 Psi Bursting Pressure.
Features
- Excellent Rubber Material: Grade R rubber material makes this Acetylene / Oxygen Torch Hose for heavy duty, Flexible in cold weather temperature range: -40 F +150 F, resitant to kink, abrasion, UV and oil.
- High Strength: This spiral synthetic yarn reinforced rubber oxygen hose and acetylene gas hose is 1/4 INCH inner diameter by 25 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure
- Come with standard size B threaded fittings and Bend Restrictors: The fitting sizes are 9/16-18 LH left-hand thread for the red acetylene hose and 9/16-18 RH right-hand thread for the green oxygen hose, which enables the hoses to connect onto existing standard regulators and torches. Bend restrictors reduce kinking and help to increase the life of the Acetylene / Oxygen Torch Hose
- COLOR-CODED: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely. Always be keen on the color-coding to ensure you know exactly how to put the connections during use.
- WIDELY USE: This flexible twin hose set designed for transporting oxygen and acetylene gases to your welding torch, brazing, soldering, and cutting equipment. These R-grade long-lasting hoses are ideal to use while working on all of your metalworking projects. We warranty this twin hose for ONE YEAR. If any problems, Please contact us.
- See more on Amazon...
Brand: YOTOO | Manufacturer: Hangzhou Yotoo Import and Export Co.,Ltd
Dimensions: 0.10 x 300.00 x 0.25 inches
Warranty: ONE YEAR WARRANTY
See On Amazon #3
Hromee Welding Hose Coupler Adapter Set 9/16"-18 LH&RH for Oxygen Acetylene Twin Hose
Asin: B0BWXCQY27
Made Of High Quality Brass, Rustless And Sturdy..
This Is The Best Used To Connect Two B-Sized Hoses Together For Increased Length, Instead Buying A New Long Hose..
The Hose Coupler Set Is Ready To Connect Oxygen Acetylene Hose..
Fitting Type: Lh And Rh. Standard B Fittings (9/16"- 18 Unf) Is Industry Standard And Fits Most Twin Welding Hoses..
Features
- Use with 1/4 and 3/16 twin hose.
- Fitting Type: LH and RH. Standard B Fittings (9/16- 18 UNF) is industry standard and fits most twin welding hoses.
- Made of high quality brass, rustless and sturdy.
- The hose coupler set is ready to connect oxygen acetylene hose.
- This is the best used to connect two B-sized hoses together for increased length, instead buying a new long hose.
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 0.80 x 4.70 x 2.75 Inches | Weight: 0.13 Pounds
Warranty: 1 year warranty
See On Amazon #4
Hromee Oxygen Acetylene Hose 1/4-Inch 25 Feet with 9/16 -18 B fittings Welding Cutting Torch Twin Hose
Asin: B096ZP14XN
High Quality Rubber: Hromee Oxygen Acetylene Hose Is Made Of Acetylene Rubber For Maximum Flexibility Which Is Easy To Store On Reels And Also Helps Increase The Durability And Resistance To Kink. Other Than These, It Also Can Stay Flexible In Extreme Temperature. All These Features Make It Ideal For Long-Term Use..
B Fittings: We Equipment B Fittings In Both Ends Which Fits For Most Welding Torch And Regulators. Fitting Sizes: 9/16"-18 Lh And 9/16"-18 Rh..
Color-Coded: Red And Green Two Different Colors Make You Distinguish Them Easily And Allow For Safe And Accurate Connections. Always Be Keen On The Color-Coding To Ensure You Know Exactly How To Put The Connections During Use..
1/4” × 25Ft: The Length Of Each Welding Hose Is 25 Feet. It Is Long Enough For Daily Life Use Or Industry And Agriculture Use. The Inner Diameter Of Hose Is 1/4 Inch(6.3Mm) Which Supply Optimal Flow Rate In The Maximum Pressure Of 300 Psi (20Bar)..
Features
- TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R.
- 1/4 25FT: The length of each welding hose is 25 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar).
- HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these features make it ideal for long-term use.
- COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use.
- B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16-18 LH and 9/16-18 RH.
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 4.00 x 9.00 x 9.00 inches | Weight: 2.70 pounds
Warranty: Manufacturer warranty for 1 Year from the day of purchase
See On Amazon #5
ABN Oxy Acetylene Hose, 50 Foot x 1/4 Inch - B Fitting Twin Cutting Torch Hose for Welding
Asin: B07TLPD4N4 | Model: ABN-2474 | PartNumber: ABN-2474 | Ean: 0810009872474 | UPC: 810009872474
[Universal Connections]: Twin Welding Hose Includes 4 Total B Fitting (9/16In - 18 Thread) Cutting Torch Hose Connectors For Either End Of Each Oxygen And Acetylene Gas Welding Lines.
[Quality Materials]: Acetylene Rubber Provides Protection From Abrasions, Cracks, Leaks, And Kinks While Remaining Flexible In Temps From -4 To 158 Degrees Fahrenheit (-20 To 70 Degrees C).
[Color Coded For Safety]: Easily Distinguish Hoses By Color; Green Oxygen Hose Features Right-Handed Threads, While Red Acetylene Fuel Hose Is Outfitted With Left-Handed Threads.
[Reach Your Project]: 50Ft (15.2M) Length To Provides Safe Distance From Tanks; 1/4In (6Mm) Inner Hose Diameter With 1/2In Outer Diameter For Maximum Work Flow.
Features
- [Complete the Job]: ABN Twin Oxy Acetylene Hose Turbo Torch is flame retardant to safely transport up to 300 PSI (20.7 Bar) of oxygen and acetylene to welding and cutting equipment
- [Reach Your Project]: 50ft (15.2m) length to provides safe distance from tanks; 1/4in (6mm) inner hose diameter with 1/2in outer diameter for maximum work flow
- [Universal Connections]: Twin welding hose includes 4 total B fitting (9/16in - 18 thread) cutting torch hose connectors for either end of each oxygen and acetylene gas welding lines
- [Color Coded for Safety]: Easily distinguish hoses by color; Green oxygen hose features right-handed threads, while red acetylene fuel hose is outfitted with left-handed threads
- [Quality Materials]: Acetylene rubber provides protection from abrasions, cracks, leaks, and kinks while remaining flexible in temps from -4 to 158 degrees Fahrenheit (-20 to 70 degrees C)
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 11.30 x 4.30 x 11.30 inches | Weight: 10.49 pounds
See On Amazon #6
OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8" UNF-18RH Fittings
Asin: B098DB1V34
300Psi Working Pressure - 600Psi Burst Pressure. High Pressure Resistance, Wear Resistance, Tear Resistance, Tortuosity Resistance, Hard To Harden In Cold Weather..
This Inert Welding Hose Suits For Our Oyhbo Argon Co2 Regulator. We Supply All Kind Of Gas Welding Equipment & Accessories, You Can Visit Our Store To Purchase. Thanks..
This Welding Gas Hose Compatible With Argon, Argon/Co2 Mixture, Helium And Any Other Welding Gases, Suitable For Various Tig And Mig Welding Machines..
6.56 Feet Long Inert Gas Hose, Crimped 5/"8 Unf-18Rh Gas Fittings On Both Ends, Will Thread Into Most Tig Mig Welders, Works Great With Argon Co2 Welding Gas Regulator..
Features
- Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body.
- 6.56 feet long inert gas hose, crimped 5/8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator.
- 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather.
- This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines.
- This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks.
- See more on Amazon...
Brand: OYHBO | Manufacturer: OYHBO
See On Amazon #7
TT FLEX Gas Connector Kit, Gas Hose Gas Line for Gas Water Heater, Stove, Dryer, 48 Inch Stainless Steel with Yellow Coated
Asin: B0BTPCDH4M | Model: TTGCK-P8 | PartNumber: TTGCK-P8 | Ean: 0768459209350 | UPC: 768459209350
Easy Installation: Only A Wrench Is Needed To Install The Gas Hose Connector Kit. Three Different Types Of Adapters Can Be Replaced As Needed..
10-Year Warranty: Please Purchase With Confidence,If You Have Any Issue With Our Gas Appliance Connector Kit, Simply Email Us..
Universal Fit: Tt Flex Gas Hose Connector Kit Is Suitable For Most Conventional Equipment,Such As Gas Stove, Gas Dryer, Gas Water Heater, Etc..
Durable: This Gas Line Is Made Of Premium Grade 304 Stainless Steel With Yellow Plastic - Sprayed Surface.It Prevents Corrosion, Kinking, And Crimping.This Yellow Gas Hose Is A Corrugated Hose, More Flexible. Fits Snugly, No Leaks..
Features
- KIT INCLUDES: This gas dryer connector kit includes 1 pc 48 inch gas dryer hose with inner dimension of 1/2 inch and outside diameter of 5/8 inch. 2 pcs 15/16 Inch-16 UN x 1/2 Inch FIP adapters, 2 pcs 15/16 Inch-16 UN x 3/4 Inch MIP (Tapped 1/2 Inch FIP ) adapters, 2 pcs 15/16 Inch-16 UN x 1/2 Inch MIP (Tapped 3/8In FIP ) adapters and 1 pc teflon tape.
- DURABLE: This gas line is made of premium grade 304 stainless steel with yellow plastic - sprayed surface.It prevents corrosion, kinking, and crimping.This yellow gas hose is a corrugated hose, more flexible. Fits snugly, no leaks.
- EASY INSTALLATION: Only a wrench is needed to install the gas hose connector kit. Three different types of adapters can be replaced as needed.
- UNIVERSAL FIT: TT FLEX gas hose connector kit is suitable for most conventional equipment,such as gas stove, gas dryer, gas water heater, etc.
- 10-YEAR WARRANTY: Please purchase with confidence,if you have any issue with our gas appliance connector kit, simply email us.
- See more on Amazon...
Brand: TT FLEX | Manufacturer: TT FLEX
Dimensions: 1.20 x 9.80 x 9.80 inches
See On Amazon #8
Grehitk Flexible Gas Line Connector for Dryer(3/4-36inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel
Asin: B0BNKN46D3 | Model: GRE0057-4 | PartNumber: GRE0057-4
Compatible With Most Gas Applicants - Our Universal Gas Dryer Installation Kit Is Suitable For Gas Log, Gas Stove, Gas Dryer, Wall Mounted Heater, Garage Heater, Fireplace, And So On. It Can Be Used Indoor Or Outdoor..
Guarantee And Service- Safe Use Is Always The First Goal Of The Product.Our Products Have Gone Through Many Quality Checks And We Never Compromise On Quality. Any Questions About Installation And Use Can Feel Free To Contact Us, We Are Happy To Serve You 24 Hours..
Easy To Install- Only One Wrench And A Little Bit Teflon Tape Are All You Need To Install The Hose. Trust Me, No More Than 2 Minutes. Note: The One Side Of Joint Connected To The Yellow Corrugated Pipe Cannot Be Wrapped With Raw Tape! Otherwise It Will Cause Air Leakage!But The Other Side Of The Joint Should Be Wrapped..
Highly Durable- High Quality Corrugated Stainless Steel Gas Hose With Multiple Types Of Threaded Joints To Create A Safe Metal Connection.Designed For Safe, Optimal Flow Rate, The Flow Capacity Is Up To 255.9K Btu. This Dryer Gas Line Kit Is 100% Leak Tested, Cas Certified; It Has Good Air Tightness, Durability, Rust And Corrosion Resistance..
Features
- SIZE- Length 36 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape.
- HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 255.9K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified; It has good air tightness, durability, rust and corrosion resistance.
- COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor.
- EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped.
- GUARANTEE AND SERVICE- Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on quality. Any questions about installation and use can feel free to contact us, we are happy to serve you 24 hours.
- See more on Amazon...
Brand: Grehitk | Manufacturer: Grehitk
Dimensions: 3.00 x 8.00 x 8.00 inches
See On Amazon #9
Master Elite 25 Foot Oxygen Acetylene Hose Twin Welding Hose Set, 1/4 Inch B Fittings, 9/16 -18 - Oxy Acetylene Cutting Torch Hoses, Welder Gas Hose Cut Metal, Green Red, Grade R, Fits Regulators
Asin: B0B94LBF6H | Model: WHS-25-SET | PartNumber: WHS-25-SET | Ean: 0840234511503 | UPC: 840234511503
All Four Hose Ends Of The Twin Welding Hose Set Come With Standard Size B Threaded Fittings. The Fitting Sizes Are 9/16"-18 Lh Left-Hand Thread For The Red Acetylene Hose And 9/16"-18 Rh Right-Hand Thread For The Green Oxygen Hose, Which Enables The Hoses To Connect Onto Existing Standard Regulators And Torches..
Our Durable, Flame Retardant, Flexible Twin Welding Hoses Are Fused Together And Are Resistant To Kinking, Cracking, Abrasion, And Weather, Unlike Other Hose Sets That Easily Crack Or Leak, Creating A Fire Hazard. They Stay Flexible In Extreme Temperatures From -4°F To 158°F, Making Them Ideal For Long-Term Use. Six Zip Ties Included. Buy With Confidence; If You're Not Satisfied With This Item At Any Time Within The First Year Of Purchase, We'll Provide A Refund Or Replacement..
The 25-Foot (7.6M) Long Torch Hoses Enable You To Safely Keep The Tanks Away From The Torch Tip While In Use. The Welding Hoses Are Long Enough For Mechanics Shops, Production Line Welding, And Other Indoor And Outdoor Construction, Industrial, And Agriculture Uses..
Both The Oxygen Hose And Acetylene Gas Hose Have A 1/4-Inch (6.3Mm) (Id) Inner Diameter And A 1/2-Inch (13Mm) (Od) Outer Diameter And Have A Maximum Pressure Of 300 Psi (20 Bar) To Supply An Optimal Flow Rate. The Hose Set Has A Color-Coding System, So You Can Distinguish That The Green Hose Is For Oxygen And The Red Hose Is For Acetylene, And This Will Ensure Safe And Accurate Connections To Your Regulator And Oxy Torch..
Features
- Master Elite Premium Quality 25-foot Acetylene / Oxygen Torch Hose Twin Pack. A durable, flexible twin hose set designed for transporting oxygen and acetylene gases to your welding torch, brazing, soldering, and cutting equipment. These R-grade long-lasting hoses are ideal to use while working on all of your metalworking projects.
- Both the oxygen hose and acetylene gas hose have a 1/4-inch (6.3mm) (ID) inner diameter and a 1/2-inch (13mm) (OD) outer diameter and have a maximum pressure of 300 PSI (20 Bar) to supply an optimal flow rate. The hose set has a color-coding system, so you can distinguish that the green hose is for oxygen and the red hose is for acetylene, and this will ensure safe and accurate connections to your regulator and oxy torch.
- All four hose ends of the twin welding hose set come with standard size B threaded fittings. The fitting sizes are 9/16-18 LH left-hand thread for the red acetylene hose and 9/16-18 RH right-hand thread for the green oxygen hose, which enables the hoses to connect onto existing standard regulators and torches.
- The 25-foot (7.6m) long torch hoses enable you to safely keep the tanks away from the torch tip while in use. The welding hoses are long enough for mechanics shops, production line welding, and other indoor and outdoor construction, industrial, and agriculture uses.
- Our durable, flame retardant, flexible twin welding hoses are fused together and are resistant to kinking, cracking, abrasion, and weather, unlike other hose sets that easily crack or leak, creating a fire hazard. They stay flexible in extreme temperatures from -4 F to 158 F, making them ideal for long-term use. Six zip ties included. Buy with confidence; if you're not satisfied with this item at any time within the first year of purchase, we'll provide a refund or replacement.
- See more on Amazon...
Brand: Master Airbrush | Manufacturer: Master Airbrush
Dimensions: 0.04 x 300.00 x 0.50 inches
See On Amazon #10
Flowmeter Hose with 5/8"-18 Male Connectors - 5 Feet Long
Asin: B076KQ768M | Model: 1C026-0011 | PartNumber: 1C026-0011 | Ean: 0840338500397, 0600136280927 | UPC: 600136280927, 840338500397
Outlet Connection: 5/8"-18 Male.
290 Psi Max Pressure - Braided And Flexible - Manufactured In High Quality Rubber..
5 Feet Hose With 5/8"-18(M) Connector Fits Flowmeter And All Major Welder Brands. Designed For Mig And Tig Welding.
Gas Service: Argon, Argon/Co2 Mixtures, Helium.
Features
- For its use with Flowmeters for Shield Gas in TIG and MIG Welding
- Gas Service: Argon, Argon/CO2 Mixtures, Helium
- Outlet Connection: 5/8-18 Male
- 5 feet hose with 5/8-18(M) connector fits flowmeter and all major welder brands. Designed for MIG and TIG welding
- 290 psi Max Pressure - Braided and flexible - Manufactured in high quality rubber.
- See more on Amazon...
Brand: SÜA WELDING TECHNOLOGIES | Manufacturer: SÜA
Dimensions: 0.04 x 60.00 x 0.62 inches | Weight: 0.50 Pounds
See On Amazon #11
30FT Inert Gas Welding Hose, Argon Gas Regulator Welding Hose, TIG MIG, 5/8" UNF-18RH Fittings
Asin: B098DTZ7LN | Ean: 0809827340395 | UPC: 809827340395
The Hose Length Is 30 Feet, Crimped Standard 5/"8 Unf-18Rh Inert Gas Fittings On Each End. 300Psi Working Pressure - 600Psi Burst Pressure. High Pressure Resistance, Wear Resistance, Tear Resistance, Tortuosity Resistance, Hard To Harden In Cold Weather..
Best Suitable For Our Oyhbo Argon Flow Meter Regulator. If You Want To Purchase The Regulator Together, You Can Ask Our Customer Service. Thanks!.
The Hose Connector Compatible With Argon, Argon/Co2 Mixture, Helium And Any Other Welding Gases, Suitable For Various Tig And Mig Welding Machines..
Inert Gas Welding Hose Argon Co2 Flow Meter Regulator Adapter Hose 5/8" Unf-18Rh Fittings 6.56 10 15 20 30 Ft.
Features
- Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body.
- Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8 UNF-18RH Fittings 6.56 10 15 20 30 FT
- The hose length is 30 Feet, crimped standard 5/8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather.
- The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines.
- Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!
- See more on Amazon...
Brand: OYHBO | Manufacturer: OYHBO
Dimensions: 0.10 x 360.00 x 0.62 inches
See On Amazon #12
YOTOO Heavy Duty Oxygen Acetylene Hose 1/4-Inch 50 Feet with 9/16"-18 B fittings Twin Welding Hose
Asin: B0BY8MF3VN
Come With Standard Size B Threaded Fittings And Bend Restrictors: The Fitting Sizes Are 9/16"-18 Lh Left-Hand Thread For The Red Acetylene Hose And 9/16"-18 Rh Right-Hand Thread For The Green Oxygen Hose, Which Enables The Hoses To Connect Onto Existing Standard Regulators And Torches. Bend Restrictors Reduce Kinking And Help To Increase The Life Of The Acetylene / Oxygen Torch Hose.
Widely Use: This Flexible Twin Hose Set Designed For Transporting Oxygen And Acetylene Gases To Your Welding Torch, Brazing, Soldering, And Cutting Equipment. These R-Grade Long-Lasting Hoses Are Ideal To Use While Working On All Of Your Metalworking Projects. We Warranty This Twin Hose For One Year. If Any Problems, Please Contact Us..
Color-Coded: Red And Green Twin Hoses Provide A Color-Coding System To Hook Up To Your Regulator And Oxy Torch Kit Safely. Always Be Keen On The Color-Coding To Ensure You Know Exactly How To Put The Connections During Use..
High Strength: This Spiral Synthetic Yarn Reinforced Rubber Oxygen Hose And Acetylene Gas Hose Is 1/4 Inch Inner Diameter By 50 Feet Long Delivers Up To 300 Psi For Maximum Working Pressure, 1200 Psi Bursting Pressure.
Features
- Excellent Rubber Material: Grade R rubber material makes this Acetylene / Oxygen Torch Hose for heavy duty, Flexible in cold weather temperature range: -40 F +150 F, resitant to kink, abrasion, UV and oil.
- High Strength: This spiral synthetic yarn reinforced rubber oxygen hose and acetylene gas hose is 1/4 INCH inner diameter by 50 FEET long delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure
- Come with standard size B threaded fittings and Bend Restrictors: The fitting sizes are 9/16-18 LH left-hand thread for the red acetylene hose and 9/16-18 RH right-hand thread for the green oxygen hose, which enables the hoses to connect onto existing standard regulators and torches. Bend restrictors reduce kinking and help to increase the life of the Acetylene / Oxygen Torch Hose
- COLOR-CODED: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely. Always be keen on the color-coding to ensure you know exactly how to put the connections during use.
- WIDELY USE: This flexible twin hose set designed for transporting oxygen and acetylene gases to your welding torch, brazing, soldering, and cutting equipment. These R-grade long-lasting hoses are ideal to use while working on all of your metalworking projects. We warranty this twin hose for ONE YEAR. If any problems, Please contact us.
- See more on Amazon...
Brand: YOTOO | Manufacturer: Hangzhou Yotoo Import and Export Co.,Ltd
Warranty: ONE YEAR WARRANTY
See On Amazon #13
Regulator to Hose Quick Connect Fittings Set with Check Valves for Torch Welding, Brass Torch to Hose Set Replace QDB30 312-QDB30
Asin: B0CJM6XVLV | Model: HLFRGLJQ0922 | PartNumber: HLFRGLJQ0922 | Ean: 0710436979183 | UPC: 710436979183
Easy To Use: The Connectors Are Carefully Crafted To Ensure That Connecting The Regulator And Hose Is Very Simple, You Can Complete The Connection Between The Regulator And Hose In Seconds, Without The Need For Time-Consuming And Laborious Tightening Of Threads Or The Use Of Complicated Tools, This Greatly Improves Work Efficiency, Ensuring Your Workflow Remains Highly Productive.
Safety Guaranteed: Huquzn Regulator To Hose Quick Connect Fittings Set Enables Precise Differentiation Through Color-Coded Plugs And Sockets, Ensuring That Plugs Can Only Be Connected To Sockets With The Same Service, Thus Eliminating The Risk Of Accidental Mix-Ups And Ensuring The Absolute Safety Of The Welding Process.
Reliable And Durable: Made Of High-Quality Brass Material, No Matter What Condition You Use These Connections, They Can Maintain Excellent Performance And Reliability, Ensuring Use Is Always Available Stable, This Not Only Improves Work Efficiency, But Also Reduces Operating Costs.
Excellent Flow Control: The Regulator To Hose Set Is Equipped With A Check Valve, The Device Can Be Quickly Closed To Ensure Timely And Effective Control Of The Flow, Not Only Minimizes Waste, But Also Optimizes The Accuracy Of Welding Operations, Make Your Welding Work More Precise And Economical, Note: We Recommend Regular Inspection Of Connections To Ensure The Performance Of The Valve.
Features
- Anti-leakage: The connector adopts a double-sealed socket connection design, which means that two levels of sealing are performed simultaneously during the connection process to ensure the absolute sealing, not only greatly improves the reliability of the connector, but also effectively prevents leakage, ensuring strong welding
- Excellent Flow Control: The regulator to hose set is equipped with a check valve, the device can be quickly closed to ensure timely and effective control of the flow, not only minimizes waste, but also optimizes the accuracy of welding operations, make your welding work more precise and economical, NOTE: We recommend regular inspection of connections to ensure the performance of the valve
- Easy to Use: The connectors are carefully crafted to ensure that connecting the regulator and hose is very simple, you can complete the connection between the regulator and hose in seconds, without the need for time-consuming and laborious tightening of threads or the use of complicated tools, this greatly improves work efficiency, ensuring your workflow remains highly productive
- Reliable and Durable: Made of high-quality brass material, no matter what condition you use these connections, they can maintain excellent performance and reliability, ensuring use is always available stable, this not only improves work efficiency, but also reduces operating costs
- Safety Guaranteed: HUQUZN regulator to hose quick connect fittings set enables precise differentiation through color-coded plugs and sockets, ensuring that plugs can only be connected to sockets with the same service, thus eliminating the risk of accidental mix-ups and ensuring the absolute safety of the welding process
- See more on Amazon...
Brand: HUQUZN | Manufacturer: Meiyatec
See On Amazon #14
SPARC Oxy Acetylene 1/4" Grade T Welding Hose B Fittings + Strain Relief Set 1YR USA Warranty (25 Feet)
Asin: B084JS7SBQ | Model: SP00075 | PartNumber: SP00075 | Ean: 0804042959353 | UPC: 804042959353
Max Pressure: This Hose Has A 300 Psi Working Pressure, And An 800 Psi Burst Pressure For Maximum Safety..
We've Got Your Back: Sparc Backs Each Hose With Our Rock-Solid 1 Year Warranty Against Manufacturing Defects. We Are Based Out Of Denver, Co And Offer Stellar Customer Service And Support Via Phone, Text, And E-Mail..
Great For: Replacing Tired, Frayed, Leaking Or Otherwise Unsafe Hoses In Your Oxy Acetylene Kit! Compatible With Any Oxy-Acetylene Regulators And Torches That Uses "B" Style Fittings (9/16"-18 Threads, Left Handed For Fuel Gas, Right Handed Threads For Oxygen. Cga Designations 023 And 022 Respectively)..
No More Frayed Ends: Built-In Metal Coil-Style Strain Relief To Prevent Hose End Damage, Which Greatly Extends The Lifespan Of The Hose..
Features
- CONSTRUCTION: 1/4" Rubber Grade T hose with Type B Fittings on both ends. A big upgrade in durability and wear resistance from typical Grade R hose, and is compatible with fuel gases like propane. The tube and cover are flame and oil resistant. If you are using a fuel gas other than acetylene, you must use Grade T hose.
- NO MORE FRAYED ENDS: Built-in metal coil-style strain relief to prevent hose end damage, which greatly extends the lifespan of the hose.
- MAX PRESSURE: This hose has a 300 PSI working pressure, and an 800 PSI burst pressure for maximum safety.
- GREAT FOR: Replacing tired, frayed, leaking or otherwise unsafe hoses in your oxy acetylene kit! Compatible with any oxy-acetylene regulators and torches that uses B style fittings (9/16-18 threads, left handed for fuel gas, right handed threads for oxygen. CGA designations 023 and 022 respectively).
- WE'VE GOT YOUR BACK: SPARC backs each hose with our rock-solid 1 year warranty against manufacturing defects. We are based out of Denver, CO and offer stellar customer service and support via phone, text, and e-mail.
- See more on Amazon...
Brand: SPARC | Manufacturer: SPARC
See On Amazon #15
QDB10 Torch to Hose Quick Connect Set, With Check Valves. Brass construction color coded for safety (oxy/green, fuel/red).
Asin: B0C2V3QKSL | Model: QDB10 | PartNumber: QDB10 | Ean: 0799793474326 | UPC: 799793474326
✅【Disconnect The Socket From The Plug】 1. Hold The Color-Coded Sleeves On The Plugs And Sockets. 2. Pull The Sleeve To The Right. When The Sleeve Is Pulled Back, It Will Release The Plug And The Airflow Will Stop Immediately. Note:Always Shut Off Gas At Source When Work Is Completed. After Disconnecting Plug, Take Care Of Plug To Avoid Damage..
✅【Warm Tips】The Following Safety And Operating Instructions Must Be Followed Each Time A Quick Release Coupling Is Installed On Welding Equipment, And All Warning Statements Must Be Strictly Observed.Our Qdb10 Quick Connect Set Is Made Of High Quality Materials For Better Durability And Performance. If You Have Any Questions About Our Products, Please Feel Free To Tell Us, We Will Solve The Problem As Soon As Possible. Our Company Is Committed To Providing You With Quality Products That You Can Buy And Use With Confidence..
✅【Maintenance & Care】Quick Connects Should Be Checked Periodically For Leaks-At Least Erery Six(6) Months Or In The Event Of Flashback Or Backfire. Check Valves Need To Be Tested More Frequantly If They Are Exposed To Unclean Conditions..
✅【Connecting The Socket To The Plug】 1. Hold The Plug And Socket. 2. Press Together Until The Color-Coded Sleeve On The Socket Moves Slightly Forward And Locks Securely. 3. Gently Pull On The Hose To Check That The Connection Is Secure. Note: During Use, Be Sure To Check For Gas Leaks After Installation..
Features
- Product Description Our quick connect kit is a connector between the oxyacetylene torch hose and the oxyacetylene torch kit. There are color coded plugs and sockets for the same gas use as the plug. For example, the oxygen plug is only connected to the oxygen socket, it cannot be physically connected to the fuel gas socket or to the insert gas socket.
- Connecting the socket to the plug 1. Hold the plug and socket. 2. Press together until the color-coded sleeve on the socket moves slightly forward and locks securely. 3. Gently pull on the hose to check that the connection is secure. Note: During use, be sure to check for gas leaks after installation.
- Disconnect the socket from the plug 1. Hold the color-coded sleeves on the plugs and sockets. 2. Pull the sleeve to the right. When the sleeve is pulled back, it will release the plug and the airflow will stop immediately. Note:always shut off gas at source when work is completed. after disconnecting plug, take care of plug to avoid damage.
- Maintenance & Care quick connects should be checked periodically for leaks-at least erery six(6) months or in the event of flashback or backfire. check valves need to be tested more frequantly if they are exposed to unclean conditions.
- Warm Tips The following safety and operating instructions must be followed each time a quick release coupling is installed on welding equipment, and all warning statements must be strictly observed.Our QDB10 quick connect set is made of high quality materials for better durability and performance. If you have any questions about our products, please feel free to tell us, we will solve the problem as soon as possible. Our company is committed to providing you with quality products that you can buy and use with confidence.
- See more on Amazon...
Brand: Miumoon | Manufacturer: Miumoon
Dimensions: 2.50 x 7.00 x 1.00 inches | Weight: 0.49 pounds
Warranty: 1 year warranty
See On Amazon #16
15 FEET Grade "T" - 1/4" OxyFuel Welding & Cutting Twin Hose with BB Fittings - S A
Asin: B07GH4ZQR8 | Model: WHT1415 | PartNumber: WHT1415 | Ean: 0689761158177, 0840338527622 | UPC: 689761158177, 840338527622
Grade "T" Twin Welding Hose Is Specially Designed To Resist The Effects Of The Oils In Propane. It Is Also More Weather-Resistant..
Ose Length: 15 Ft..
Grade "T" Twin Fuel Gas Welding Hose Is Designed For Transfer Of Many Commonly Used Welding Fuel Gases And Oxygen In Applications To 200°F And 200 Psi..
Diameter: 1/4" Fittings: Type: B - B Size: 9/16"-18 Lh For Fuel Gas & Type: B - B Size: 9/16"-18 Rh For Oxygen.
Features
- Grade "T" Twin Wedling Hose for iots use with Propane, Alternative Fuel Gases and Acetylene
- Diameter: 1/4 Fittings: Type: B - B Size: 9/16-18 LH for Fuel gas & Type: B - B Size: 9/16-18 RH for Oxygen
- Grade T twin welding hose is specially designed to resist the effects of the oils in propane. It is also more weather-resistant.
- Grade T Twin Fuel Gas Welding Hose is designed for transfer of many commonly used welding fuel gases and oxygen in applications to 200 F and 200 psi.
- ose Length: 15 ft.
- See more on Amazon...
Brand: SÜA WELDING TECHNOLOGIES | Manufacturer: SÜA
Dimensions: 0.04 x 180.00 x 0.25 inches | Weight: 4.00 Pounds
See On Amazon #17
SPARC Oxy Acetylene Grade T Welding Hose 3/16" B Fittings + Strain Relief Set 1YR USA Warranty (15FT)
Asin: B09X9XX6RM | Model: SP00064 | PartNumber: SP00064 | Ean: 0804042959537 | UPC: 804042959537
Max Pressure: This Hose Has A 300 Psi Working Pressure, And An 800 Psi Burst Pressure For Maximum Safety..
We've Got Your Back: Sparc Backs Each Hose With Our Rock-Solid 1 Year Warranty Against Manufacturing Defects. We Are Based Out Of Denver, Co And Offer Stellar Customer Service And Support Via Phone, Text, And E-Mail..
Great For: Replacing Tired, Frayed, Leaking Or Otherwise Unsafe Hoses In Your Oxy Acetylene Kit! Compatible With Any Oxy-Acetylene Regulators And Torches That Uses "B" Style Fittings (9/16"-18 Threads, Left Handed For Fuel Gas, Right Handed Threads For Oxygen. Cga Designations 023 And 022 Respectively)..
No More Frayed Ends: Built-In Metal Coil-Style Strain Relief To Prevent Hose End Damage, Which Greatly Extends The Lifespan Of The Hose..
Features
- CONSTRUCTION: 3/16" Rubber Grade T hose with Type B Fittings on both ends. A big upgrade in durability and wear resistance from typical Grade R hose, and is compatible with fuel gases like propane. The tube and cover are flame and oil resistant. If you are using a fuel gas other than acetylene, you must use Grade T hose.
- NO MORE FRAYED ENDS: Built-in metal coil-style strain relief to prevent hose end damage, which greatly extends the lifespan of the hose.
- MAX PRESSURE: This hose has a 300 PSI working pressure, and an 800 PSI burst pressure for maximum safety.
- GREAT FOR: Replacing tired, frayed, leaking or otherwise unsafe hoses in your oxy acetylene kit! Compatible with any oxy-acetylene regulators and torches that uses B style fittings (9/16-18 threads, left handed for fuel gas, right handed threads for oxygen. CGA designations 023 and 022 respectively).
- WE'VE GOT YOUR BACK: SPARC backs each hose with our rock-solid 1 year warranty against manufacturing defects. We are based out of Denver, CO and offer stellar customer service and support via phone, text, and e-mail.
- See more on Amazon...
Brand: SPARC | Manufacturer: SPARC
See On Amazon #18
QDB30 Torch to Hose Quick Connect Set with Check Valves, Brass construction (312-QDB30)
Asin: B0CGV8JN5T | Model: LPL-B30 | PartNumber: LPL-B30 | Ean: 0784300998051 | UPC: 784300998051
【Installation Instructions】An Arrow Indicating Gas Flow Direction Is Stamped On The Body Of The Quick Connect Socket. When Installing A Quick Connect ,Always Position It In The Correct Flow Direction.Gas Will Flow Through A Quick Connect With A Check Valve Only When It Is Installed In The Correct Direction..
【2 Year Warranty & Service】The Following Safety And Operating Instructions Must Be Observed When Installing Quick Connectors On Welding Equipment. Our Products Include Instructions. If There Is Any Problem You Can Contact Us And We Will Replace It For You Or Give You A Full Refund, And We Will Serve You Online 12 Hours A Day..
【Instructions Use】Reverse Flow Check Valves Are Mechanical Devices That May Leak When Abuse Or Dirty. Quick Connects Should Be Checked Periodically For Leaks-At Least Erery Six(6) Months Or In The Event Of Flashback Or Backfire. Check Valves Need To Be Tested More Frequantly If They Are Exposed To Unclean Conditions. If Defective, Check Valves Need To Be Replaced..
【Leak Testing Of Socket 】1.Adjust Regulator Pressure To Approximately 3 To 5 Psi. 2.Close Torch Valve. 3.Disconnect Coupler And Submerge The Socket In Water.Bubbles Will Appear If The Socket Is Leaking. Replace Socket If Leaking. 4.After Leak Test Is Completed And No Leaks Are Found, Reconnect Plug And Socket For Normal Operation..
Features
- About Products Our Quick Connect couplers have color-coded plugs and sockets:fuel gas/red, oxygen/green, inert gas/blue. Quick Connects are designed so that the plug will connect only to the socket with the same gas service as the plug. For example, the oxygen plug connects only to the oxygen socket-it physically cannot be connected to the fuel gas socket or the insert gas socket. CGA connections are 022 for oxygen, 023 for fuel gas and 032 for insert gas.
- Leak Testing of socket 1.Adjust regulator pressure to approximately 3 to 5 psi. 2.Close torch valve. 3.Disconnect coupler and submerge the socket in water.Bubbles will appear if the socket is leaking. Replace socket if leaking. 4.After leak test is completed and no leaks are found, reconnect plug and socket for normal operation.
- Installation instructions An arrow indicating gas flow direction is stamped on the body of the Quick Connect socket. When Installing a Quick Connect ,always position it in the correct flow direction.Gas will flow through a Quick Connect with a check valve only when it is installed in the correct direction.
- Instructions use Reverse flow check valves are mechanical devices that may leak when abuse or dirty. Quick Connects should be checked periodically for leaks-at least erery six(6) months or in the event of flashback or backfire. Check valves need to be tested more frequantly if they are exposed to unclean conditions. If defective, check valves need to be replaced.
- 2 Year Warranty & Service The following safety and operating instructions must be observed when installing quick connectors on welding equipment. Our products include instructions. if there is any problem you can contact us and we will replace it for you or give you a full refund, and we will serve you online 12 hours a day.
- See more on Amazon...
Brand: CAYUEMUM | Manufacturer: CAYUEMUM
Dimensions: 0.67 x 3.94 x 0.67 inches | Weight: 8.50 ounces
See On Amazon #19
Twin Torch Welding Hose 'B' Size Coupler Set, Oxygen Acetylene/Propane Couplings
Asin: B0B2GMMDBT
[Secure And Leak-Free Connection] These Couplers Ensure A Reliable And Leak-Free Connection Between Hoses And Torches, Enhancing Safety And Efficiency During Operations..
[American-Made Quality] The Coupler Set Is Proudly "Made In The Usa," Reflecting A Commitment To Quality And Craftsmanship, And Providing Assurance Of A Dependable And Durable Solution For Welding Hose Connections..
[Quick And Convenient] The Set Allows For Easy And Rapid Connection And Disconnection Of Hoses And Torches, Minimizing Downtime And Streamlining Work Processes..
[Multi-Gas Compatibility] The Couplers Are Compatible With Gases Such As Oxygen, Acetylene, And Propane, Making Them Versatile For Various Welding And Cutting Tasks..
Features
- [Versatile Hose Coupler Set] This set includes couplers designed for 'B' (9/16" - 18) size hoses, offering compatibility with a range of welding and cutting applications.
- [Multi-Gas Compatibility] The couplers are compatible with gases such as oxygen, acetylene, and propane, making them versatile for various welding and cutting tasks.
- [Secure and Leak-Free Connection] These couplers ensure a reliable and leak-free connection between hoses and torches, enhancing safety and efficiency during operations.
- [Quick and Convenient] The set allows for easy and rapid connection and disconnection of hoses and torches, minimizing downtime and streamlining work processes.
- [American-Made Quality] The coupler set is proudly Made in the USA, reflecting a commitment to quality and craftsmanship, and providing assurance of a dependable and durable solution for welding hose connections.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #20
Inert Gas Hose Argon CO2 Nitrogen Compressed Air High Pressure Resistant Union Nut 1/4 Inch (1.5m/4.9ft)
Asin: B0D2JC11YD | Model: Estinktzakxomr47-11 | PartNumber: Estinktzakxomr47-11
[Rugged Brass Connector] That Is -Resistant And Provides Excellent Stability For Long-Term Use Without Degradation..
[High Flexibility Hose] That Can Be Bent Randomly Without Deformation, Allowing For Easy Handling And Maneuverability In Various Work Environments..
[Suitable For Multiple Gases] Including Air, Compressed Air, Argon, Nitrogen, And Carbon Dioxide, Making It Versatile For Different Welding Tasks..
[ Rubber Hose] With Good Toughness For Durability And Longevity, Ensuring High Pressure Resistance And Anti-Aging Properties..
Features
- [ Machined Threads] For a secure connection, ensuring a tight fit and reliable performance during welding applications.
- [ Rubber Hose] With good toughness for durability and longevity, ensuring high pressure resistance and anti-aging properties.
- [Rugged Brass Connector] That is -resistant and provides excellent stability for long-term use without degradation.
- [Suitable for Multiple Gases] Including air, compressed air, argon, nitrogen, and carbon dioxide, making it versatile for different welding tasks.
- [High Flexibility Hose] That can be bent randomly without deformation, allowing for easy handling and maneuverability in various work environments.
- See more on Amazon...
Brand: Estink | Manufacturer: Estink
See On Amazon #21
KIMISS Premium Quality Inert Gas Hose for Welding - Argon, CO2, Nitrogen, C Ressed Air - 1/4 Inch Union Nut Connection (1.5m/4.9ft)
Asin: B0D2J7G47B | Model: KIMISSggndb2pe8v-11 | PartNumber: KIMISSggndb2pe8v-11
3. Rust- Ant Brass Connector For Long-Lasting Durability: Our Hose Features A Sturdy Brass Connector That Is Ant To And Ensures Stable Gas . -Machined Threads Guarantee A Secure Connection, Minimizing The Of Gas Leaks..
5. Easy To Use And C Atible With Multiple Systems: The 1/4-Inch Union Nut Connection Allows For Quick And Easy Installation On A Wide Of Welding Equipment And C Ressed Air Systems. It's A Hassle- Solution That Ensures Smooth And Efficient Gas Delivery For All Your Welding Needs..
4. -Aging Properties For Extended Hose Life: Our Inert Gas Hose Is Treated With -Aging Agents To Maintain Its Flexibility And Durability Over Time. This Extends The Lifespan Of The Hose, Saving You Money On Frequent Replacements..
2. Premium Rubber Ma L For Durability And Flexibility: Made From Rubber, This Hose Boasts Excellent Toughness And Ance To High Pressures. Its Flexible Design Allows It To Be Bent Easily Without Deformation, Ensuring A Smooth Gas And Maximum Performance..
Features
- 1. Durable and Versatile Hose for Multiple Applications: Our inert gas hose is specifically designed to handle a of gases, including argon, nitrogen, c ressed air, and carbon dioxide. It's the perfect choice for welding applications that require a reliable and dependable gas delivery system.
- 2. Premium Rubber Ma l for Durability and Flexibility: Made from rubber, this hose boasts excellent toughness and ance to high pressures. Its flexible design allows it to be bent easily without deformation, ensuring a smooth gas and maximum performance.
- 3. Rust- ant Brass Connector for Long-Lasting Durability: Our hose features a sturdy brass connector that is ant to and ensures stable gas . -machined threads guarantee a secure connection, minimizing the of gas leaks.
- 4. -Aging Properties for Extended Hose Life: Our inert gas hose is treated with -aging agents to maintain its flexibility and durability over time. This extends the lifespan of the hose, saving you money on frequent replacements.
- 5. Easy to Use and C atible with Multiple Systems: The 1/4-inch union nut connection allows for quick and easy installation on a wide of welding equipment and c ressed air systems. It's a hassle- solution that ensures smooth and efficient gas delivery for all your welding needs.
- See more on Amazon...
Brand: KIMISS | Manufacturer: KIMISS
Dimensions: 1.18 x 7.87 x 6.69 Inches
See On Amazon #22
RX WELD Oxygen Acetylene Hose 1/4-Inch 50 Feet with 9/16"-18 B Fittings, Torch Hose, Grade R
Asin: B0D12GX9Q2 | Model: RX50OAH | PartNumber: RX50OAH
Max Working Pressure: 300Psi(20Bar), Bursting Pressure: 900Psi..
Color: Red & Green. The Green Line Is For Oxygen And The Red Line Is For Acetylene..
The Twin Hose: Is Designed For Transporting Oxygen And Acetylene To Your All Oxy-Acetylene Welding, Brazing, Soldering And Cutting Equipment..
No More Frayed Ends: Built-In Metal Coil-Style Strain Relief To Prevent Hose End Damage, Which Greatly Extends The Lifespan Of The Hose..
Material: Rubber, Grade R, Inner Diameter: 1/4”..
Features
- Length: 50 Feet, Fitting: 9/16 -18LH/RH.
- Material: Rubber, Grade R, Inner Diameter: 1/4 .
- MAX Working Pressure: 300PSI(20Bar), Bursting Pressure: 900PSI.
- NO MORE FRAYED ENDS: Built-in metal coil-style strain relief to prevent hose end damage, which greatly extends the lifespan of the hose.
- Color: Red & Green. The green line is for oxygen and the red line is for acetylene.
- The Twin Hose: is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment.
- See more on Amazon...
Brand: RX WELD | Manufacturer: RX WELDER
Dimensions: 0.10 x 5.60 x 3.00 Inches
Amazon Price: $44.99 | as of 04/25/2024
(8:53am pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #23
Inert Gas Hose, Inert Gas Fitting Thread 1/4inch Rubber + Brass Argon Hose for Welding (2m/6.6ft)
Asin: B0D1VYVBVG | Model: Eujgoov3dhose0cqm-12 | PartNumber: Eujgoov3dhose0cqm-12
[Flexible Design] - The High Flexibility Hose Can Be Bent Randomly Without Deformation, Providing Convenience And Ease Of Use During Welding Operations..
[Stable Connection] - The Machined Threads On The Brass Connector Ensure A Firm And Stable Connection, Reducing The Of Leaks Or Disconnections..
[Durable And Reliable] - Built To Last, This Hose Is Designed To Withstand High Pressures And Harsh Conditions, Ensuring Long-Lasting Performance And Durability..
[ Materials] - This Inert Gas Hose Is Made Of Rubber And Rugged Brass Connector, Ensuring Toughness, Pressure Resistance, And Anti-Aging Properties..
Features
- [Versatile Use] - Suitable for a wide range of gases including air, compressed air, argon, nitrogen, and carbon dioxide, making it a versatile choice for various applications.
- [ Materials] - This inert gas hose is made of rubber and rugged brass connector, ensuring toughness, pressure resistance, and anti-aging properties.
- [Flexible Design] - The high flexibility hose can be bent randomly without deformation, providing convenience and ease of use during welding operations.
- [Durable and Reliable] - Built to last, this hose is designed to withstand high pressures and harsh conditions, ensuring long-lasting performance and durability.
- [Stable Connection] - The machined threads on the brass connector ensure a firm and stable connection, reducing the of leaks or disconnections.
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon #24
Brake Oil Line, Car Brake Line Tubing Kit, 5m/16.4ft Brake Line Kit 0.028in/0.7mm Thick Copper NickelPlated for Hydraulic Braking Fuel System
Asin: B0D1KJPHJJ
Strudy Construction: Made Of Copper Nickelplated Material, The Brake Oil Line Is Built To Withstand The Rigors Of Braking And Fuel Systems. This Fuel Hose Is Designed To Last, Offering Long-Term Durability And Peace Of Mind..
Essential Safety Component: Ensure The Integrity Of Your Vehicle's Brake System With This Brake Oil Pipe. The High-Quality Construction And Precise Design Of This Fuel Line Tubing Kit Contribute To Reliable And Safe Braking Performance, Providing Peace Of Mind While Driving..
Easy To Install: The 5M/16.4Ft Length Of This Brake Pipe Coil Provides Ample Tubing For Installation. With A Thickness Of 0.028In/0.7Mm, This Fuel Tube Is Flexible And Easy To Manipulate, Making Installation And Routing Straightforward And Hasslefree..
Versatile Use: This Car Brake Line Tubing Kit Is Designed For Use In Hydraulic Braking And Fuel Systems. The Brake Line Kit Is Suitable For Various Vehicles, Providing Flexibility And Compatibility For Different Applications..
Features
- Improved Brake System Performance: Upgrade your car's braking system with this high-quality Brake Oil Line. The Copper NickelPlated tubing ensures optimal performance, durability, and reliability for enhanced safety on the road.
- Versatile Use: This Car Brake Line Tubing Kit is designed for use in hydraulic braking and fuel systems. The Brake Line Kit is suitable for various vehicles, providing flexibility and compatibility for different applications.
- Strudy Construction: Made of copper nickelplated material, the Brake Oil Line is built to withstand the rigors of braking and fuel systems. This Fuel Hose is designed to last, offering long-term durability and peace of mind.
- Easy to Install: The 5m/16.4ft length of this Brake Pipe Coil provides ample tubing for installation. With a thickness of 0.028in/0.7mm, this Fuel Tube is flexible and easy to manipulate, making installation and routing straightforward and hasslefree.
- Essential Safety Component: Ensure the integrity of your vehicle's brake system with this Brake Oil Pipe. The high-quality construction and precise design of this Fuel Line Tubing Kit contribute to reliable and safe braking performance, providing peace of mind while driving.
- See more on Amazon...
Brand: Zixyqol | Manufacturer: Zixyqol
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.12 pounds
See On Amazon #25
Inert Gas Hose Argon Hose Co2 Welding Nut 1 Argon Gas Hose (2m/6.6ft)
Asin: B0D12WVHBM | Model: gernieiks8qyeo0a-12 | PartNumber: gernieiks8qyeo0a-12 | Ean: 7903686838079
High Pressure Resistance: Able To Withstand High Pressure Gases, Ensuring Safe Use, Ideal For Professional And Personal Welding Work..
Rugged Brass Connector, Not Easy To Corrode, Good Stability..
Rubber Hose, Good Toughness, High Pressure Resistant, Anti-Aging..
High Flexibility Hose, Can Be Bent Randomly Without Deformation..
Features
- machined threads ensure firm connection.
- High flexibility hose, can be bent randomly without deformation.
- High Pressure Resistance: Able to withstand high pressure gases, ensuring safe use, ideal for professional and personal welding work.
- rubber hose, good toughness, high pressure resistant, anti-aging.
- Rugged brass connector, not easy to corrode, good stability.
- See more on Amazon...
Brand: gernie | Manufacturer: gernie
See On Amazon #26
Inert Gas Hose Argon Hose Co2 Water Hose Argon Gas Hose (2m/6.6ft)
Asin: B0D12YFKP1 | Model: ZIZEVghzo7wtg4d-12 | PartNumber: ZIZEVghzo7wtg4d-12
High Pressure Resistance: Able To Withstand High Pressure Gases, Ensuring Safe Use, Ideal For Professional And Personal Welding Work..
Rugged Brass Connector, Not Easy To Corrode, Good Stability..
Rubber Hose, Good Toughness, High Pressure Resistant, Anti-Aging..
High Flexibility Hose, Can Be Bent Randomly Without Deformation..
Features
- machined threads ensure firm connection.
- High flexibility hose, can be bent randomly without deformation.
- High Pressure Resistance: Able to withstand high pressure gases, ensuring safe use, ideal for professional and personal welding work.
- rubber hose, good toughness, high pressure resistant, anti-aging.
- Rugged brass connector, not easy to corrode, good stability.
- See more on Amazon...
Brand: ZIZEV | Manufacturer: ZIZEV
See On Amazon #27
Exhaust Reducer Adapter, Exhaust Pipe Reducer Adapter Connector 2.75in ID to 3in OD Rugged Aluminum Alloy Aluminized Exhaust Reducer Adapter with Clamp for Car
Asin: B0CZHXBLYD
Excellent Sealing: Exhaust Reducer Adapter With Clamp Can Connect The Pipeline More Firmly And Securely, Preventing Air Leakage And Providing A Reliable Sealing Effect..
Ideal Replacement: Fine Craftsmanship, This Is Your Ideal Option And Replacement For Your Original Damaged And Old Aluminized Exhaust Reducer Adapter, Perfect For Your Car..
Outstanding Design: The Exhaust Reducer Adapter Is Made From A Single Tube. And It Is Hardness, Not Easy To Deform, Sturdy And Durable And Has A Long Service Life..
Main Function: The Exhaust Reducer Pipe Adapter Has Excellent Connection Fixing To Prevent Loosening, Keeping Your Car Operating At Its Best..
Features
- Applicable Models: Exhaust pipe reducer adapter connector with 2.75in ID to 3in OD is suitable for most models that fit the size. Please confirm whether your model is applicable before buying.
- Main Function: The exhaust reducer pipe adapter has excellent connection fixing to prevent loosening, keeping your car operating at its best.
- Excellent Sealing: Exhaust reducer adapter with clamp can connect the pipeline more firmly and securely, preventing air leakage and providing a reliable sealing effect.
- Outstanding Design: The exhaust reducer adapter is made from a single tube. And it is hardness, not easy to deform, sturdy and durable and has a long service life.
- Ideal Replacement: Fine craftsmanship, this is your ideal option and replacement for your original damaged and old aluminized exhaust reducer adapter, perfect for your car.
- See more on Amazon...
Brand: Zixyqol | Manufacturer: Zixyqol
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.25 pounds
See On Amazon #28
Brass Pipe Tee Fitting, 8mm Female T Fitting Brass 1/8in Thread 3 Way Pipe Connector for Air Water Gas Fuel or Oil Auto, Metals Brass Pipe Hose Fitting
Asin: B0CZHW4GWS
Superior Sealing: The Tee Connector Has Demonstrated Excellent Sealing Capabilities. It Effectively Prevents Leakage Of Oil Or Fluids, Ensuring A Reliable And Durable Performance..
Versatile Application: The Pipe Fitting Has A Wide Range Of Applications And Can Be Used In Various Industries. Its Solid Construction Ensures Reliable Performance In Different Environments..
Perfect Aftermarket Replacement Part: The Fitting Is A Perfect Aftermarket Replacement Part That Can Be Used To Replace Or Repair Damaged Or Worn Out Components In Your Vehicle..
Excellent Fixing Performance: The T Fitting Offers A Secure And Stable Fixing Performance. It Can Maintain A Stable Connection For A Prolonged Period, Ensuring Reliable And Uninterrupted Usage..
Features
- Brass Material: The female T fitting is made from brass material, which provides outstanding rust resistance. It is durable and can withstand long term use without degradation in performance.
- Excellent Fixing Performance: The T fitting offers a secure and stable fixing performance. It can maintain a stable connection for a prolonged period, ensuring reliable and uninterrupted usage.
- Superior Sealing: The Tee connector has demonstrated excellent sealing capabilities. It effectively prevents leakage of oil or fluids, ensuring a reliable and durable performance.
- Perfect Aftermarket Replacement Part: The fitting is a perfect aftermarket replacement part that can be used to replace or repair damaged or worn out components in your vehicle.
- Versatile Application: The pipe fitting has a wide range of applications and can be used in various industries. Its solid construction ensures reliable performance in different environments.
- See more on Amazon...
Brand: Zixyqol | Manufacturer: Zixyqol
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.09 pounds
See On Amazon #29
STARTECHWELD Argon Gas Hose for MIG/TIG Welding Flowmeter 1/4", 5/8"X18 Male, NPT Fittings, Inert Hose (10 Feet)
Asin: B09BDQ89C4 | Ean: 0818988018623 | UPC: 818988018623
Compatible: This Welding Gas Hose Is Compatible With Argon, Co2, Helium, And Any Other Welding Gases. Ideal For Mig/Tig Flowmeter 1/4", 5/8"X18 Male. Maximum Working Pressure - 200 Psi.
Satisfaction Guarantee: We Always Respect And Welcome Customer Queries And Feedback. If For Any Reason You Are Not Satisfied, Feel Free To Reach Out To Us Regarding Any Problem Regarding Our Argan Gas Hose. We Are Here To Help You Before And After The Purchase..
Features: This Gas Hose Is Flame And Oil-Resistant And Also Self-Extinguishing Which Provides External And Internal Protection Against Adverse Conditions. It Is Easy To Roll Up And Store After Use And Wipes Clean With A Soft Cloth..
Size: 10 Feet Long Inert Gas Hose, Crimped 1/4", 5/8" Male Fittings/Gas Fittings On Both Ends, Will Thread Into Most Tig/Mig Welders, Operates Great With Argon Co2 Welding Gas Regulator..
Features
- Material: This Argon Gas Hose is made from premium rubber materials and 5/8" x 18 brass male fittings on both ends. It is a 100% leak-free, lightweight hose.
- Size: 10 feet long inert gas hose, crimped 1/4, 5/8 male fittings/gas fittings on both ends, will thread into most TIG/MIG welders, operates great with argon CO2 welding gas regulator.
- Compatible: This welding gas hose is compatible with argon, CO2, helium, and any other welding gases. Ideal for MIG/TIG Flowmeter 1/4, 5/8X18 Male. Maximum Working Pressure - 200 PSI
- Features: This gas hose is flame and oil-resistant and also self-extinguishing which provides external and internal protection against adverse conditions. It is easy to roll up and store after use and wipes clean with a soft cloth.
- Satisfaction Guarantee: We always respect and welcome customer queries and feedback. If for any reason you are not satisfied, feel free to reach out to us regarding any problem regarding our Argan Gas Hose. We are here to help you before and after the purchase.
- See more on Amazon...
Brand: STARTECHWELD | Manufacturer: STARTECHWELD
Dimensions: 1.00 x 7.00 x 6.00 inches | Weight: 20.00 ounces
See On Amazon #30
Hot Max 24131 Oxy-Acetylene Hose Coupler/Union Set For Standard Twin Welding Hoses
Asin: B005TGN7A0 | Model: 24131 | PartNumber: 24131 | Ean: 0816002003952 | UPC: 816002003952
Standard “B” Fittings (9/16"- 18 Unf) Is Industry Standard And Fits Most Twin Welding Hoses.
Great For Extending A Twin Welding Hose Instead Of Buying A New Long Hose.
Fits Most 1/4” And 3/16” Twin Hose Sets.
Solid Brass Construction For Long Life And Durability.
Features
- Set includes 1 left hand thread union and 1 right hand thread union
- Solid brass construction for long life and durability
- Standard B Fittings (9/16- 18 UNF) is industry standard and fits most twin welding hoses
- Fits most 1/4 and 3/16 twin hose sets
- Great for extending a twin welding hose instead of buying a new long hose
- See more on Amazon...
Brand: Hot Max Torches | Manufacturer: Hot Max
Dimensions: 0.50 x 1.50 x 1.50 inches | Weight: 0.05 pounds
Warranty: 30 Day
See On Amazon
Looking For Something Else?
Search