Best valve train tools - Buying Guide
Last Updated: 04/25/2024
Share on
Bestselling valve train tools on Amazon
- Orion Motor Tech Valve Spring Compressor | 10 Piece Spring Clamp Tool Kit with C Clamp, Collet Pushe...
- Orion Motor Tech Valve Spring Compressor, 10pcs Valve Spring Removal Tool with Solid C Clamp, 5pcs C...
- Upgrade 67605 Valve Spring Compressor Tool Higher Nut Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS...
- ATP Solid Valve Spring Compressor C Clamp Service Kit
- SMOTIVEPRO 8in Valve Spring Compressor Tool Universal Automotive Engine Valve Spring Removal Tool
- OEMTOOLS 25355 24" Straight Edge Steel Precision Ground Machined Straight Edge, Use with Feeler Gaug...
- OEMTOOLS 24429 Spring Compressor for Ford 3-Valve Engines, Ford Valve Spring Compressor for 4.6L and...
- DASBET Valve Spring Compressor C Clamp Service Kit Valve Spring Removal Tool with Solid C Clamp for ...
- ATPEAM Auto Valve Spring Compressor C Clamp Tool Set Service Kit Suitable for Motorcycle, ATV, Car, ...
- Dreyoo Valve Adjustment Tool Jam Nut, Slotted Valve Adjusting Stud, Valve Grinding Tool Compatible w...
#1
Orion Motor Tech Valve Spring Compressor | 10 Piece Spring Clamp Tool Kit with C Clamp, Collet Pusher Adapters, Extension Rods, and Lever for Car, Motorcycle, ATV, and Small Engine Repairs
Asin: B08FZWQGF2
Solid Durable Construction: Our C Clamp And Other Parts Are Forged From Carbon Steel, Heat Treated And Coated With Black Oxide To Provide Superior Strength And Corrosion Resistance And Withstand The Stress Of Your Compressed Springs.
Satisfaction Guaranteed: Order Knowing That Orion Motor Tech's Usual Strong Warranty And Friendly 24/7 Customer Service Ensures These Automotive Tools And Equipment Will Give You Years Of Helpful Service!.
Easy Storage & Transport: The Reinforced Blow-Molded Case Keeps Everything Organized, Easy To Carry, And Just As Convenient To Stow Away Between Jobs.
Safe & Simple Operation: Instructions Guide Simple Use, Selecting The Best Sizes For Compressing The Valve Springs Or Dealing With Cylinder Heads Safely During Removal And Installation From Almost Any Automotive, Motorcycle, Or Other Small Engine.
Features
- 10-PIECE VALVE SPRING SET: This clamp set by Orion Motor Tech includes a wide C clamp, 3 extension rods (3" 4.4" & 4.4"), 5 collet adapters (16 19 23 25 & 30mm), and a 4-inch hand lever
- SAFE & SIMPLE OPERATION: Instructions guide simple use, selecting the best sizes for compressing the valve springs or dealing with cylinder heads safely during removal and installation from almost any automotive, motorcycle, or other small engine
- SOLID DURABLE CONSTRUCTION: Our C clamp and other parts are forged from carbon steel, heat treated and coated with black oxide to provide superior strength and corrosion resistance and withstand the stress of your compressed springs
- EASY STORAGE & TRANSPORT: The reinforced blow-molded case keeps everything organized, easy to carry, and just as convenient to stow away between jobs
- SATISFACTION GUARANTEED: Order knowing that Orion Motor Tech's usual strong warranty and friendly 24/7 customer service ensures these automotive tools and equipment will give you years of helpful service!
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
See On Amazon #2
Orion Motor Tech Valve Spring Compressor, 10pcs Valve Spring Removal Tool with Solid C Clamp, 5pcs Collet Pusher Adapters for Motorcycle, ATV, Car, Small Engine Vehicle Equipment
Asin: B07DC1SJ5R | Model: 13 | PartNumber: 13
Simple Operation - Close The Valve Spring Compressor Until Touching The Center Rod, And Insert The Compressor Into The Coil Spring. Carefully Compress The Spring For Removal Or Install And Only Release Compression When The Spring Is Set For Install. Handle With Caution..
Satisfaction Guaranteed - If Any Component Of The Toolset Is Defective, The Manufacturer Will Exchange The Product Or Accept A Return. Orion Motor Tech’S Outstanding Customer Service Team Will Promptly Follow Up With Any Service Request..
Tool Storage Case - This Toolset Comes Packaged In A High-Impact, Custom-Molded Case That Holds Each Part Securely For Convenient Organization And Easy Transport..
Durable Steel Construction - With Forged Steel Construction For Superior Strength And Hardness, This C-Clamp Will Not Bend Or Twist Under The Stress Of Compressing Valve Springs. The Smooth Surface Is Finished With Oxide To Resist Rust And Corrosion..
Features
- EFFICIENT VALVE REMOVAL/INSTALL - Everything you need to safely remove or install valve springs, including the wide C-clamp, extension screws, and pushers with 5 collet sizes for a precise fit on almost any automotive or small engine valve spring and cylinder head.
- DURABLE STEEL CONSTRUCTION - With forged steel construction for superior strength and hardness, this C-Clamp will not bend or twist under the stress of compressing valve springs. The smooth surface is finished with oxide to resist rust and corrosion.
- SIMPLE OPERATION - Close the valve spring compressor until touching the center rod, and insert the compressor into the coil spring. Carefully compress the spring for removal or install and only release compression when the spring is set for install. Handle with caution.
- TOOL STORAGE CASE - This toolset comes packaged in a high-impact, custom-molded case that holds each part securely for convenient organization and easy transport.
- SATISFACTION GUARANTEED - If any component of the toolset is defective, the manufacturer will exchange the product or accept a return. Orion Motor Tech s outstanding customer service team will promptly follow up with any service request.
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 2.36 x 13.98 x 8.07 Inches
Warranty: 1-year warranty
See On Amazon #3
Upgrade 67605 Valve Spring Compressor Tool Higher Nut Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks, w/T Mark& Storage Box
Asin: B08NDM84DJ | Ean: 7790262222458
✔New Kits Come With A Storage Box For Portability. This Tool Kit Is For 4.8, 5.3, 5.7, 6.0, And 6.2L Ls Engines And Is A Must When It Comes Time To Install A New Set Of Valve Springs!.
✔Springs Are Not Included In The Product. Read The Instructions Included In The Package First. Tips: Adding Lubricant Will Work More Perfectly. It Is Not Recommended To Buy Cheaper Alternatives, Which Will Not Last Long. Any Questions Please Let Us Know, Thanks!.
✔Oe 67605, Will Be Compatible With Any Ls Engine For Firebird, Silverado, Camaro, Gto, Trans Am, Corvette, Ctsv, Sierra, Tahoe, Suburban, Pontiac G8 Gt And More. Also Compatible With Dodge Ram 318 360 5.2 5.9 Engine (But Need To Use Your Original Bolts)..
✔Upgrade Manufacturing, T - Shaped Parts Are Marked With "Top" For Ease Of Use. This Valve Spring Compressor Kit Is A Great Helper To Remove Old Stock Valve Springs And Install New Valve Springs..
Features
- We have upgraded the nuts and made them higher to enhance stability. Bolts and nuts Kit built from 3/8" Steel and Precision CNC Machined for a great fit and Durability. Performance levels are 10.9, 10.9 and 12.9, much better than the other 8.8.
- Upgrade manufacturing, T - shaped parts are marked with TOP for ease of use. This Valve Spring Compressor Kit is a great helper to remove old stock valve springs and install new valve springs.
- New kits Come with a Storage Box for Portability. This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!
- OE 67605, will be compatible with any LS engine for Firebird, Silverado, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more. Also compatible with Dodge Ram 318 360 5.2 5.9 Engine (but need to use your original bolts).
- Springs are not included in the product. Read the instructions included in the package first. Tips: Adding lubricant will work more perfectly. It is not recommended to buy cheaper alternatives, which will not last long. Any questions please let us know, Thanks!
- See more on Amazon...
Brand: 3mirrors | Manufacturer: 3mirrors
Weight: 0.79 Pounds
See On Amazon #4
ATP Solid Valve Spring Compressor C Clamp Service Kit
Asin: B072MNW7Y5 | Model: 13 | PartNumber: 13 | Ean: 0687926000002 | UPC: 687926000002
Superior C Clamp Jaw: Our Auto Valve Spring Compressor C Clamp Tool Set Using 1.7Mm Thick Heat Treated Steel With Black Oxide Treatment To Provide Superior Strength And Corrosion Resistance And Withstand The Stress Of Your Compressed Springs, Not Easy To Bend And Deform While Compressing. The Two End Of The C Clamp Are Aligned In A Standard Straight Line, Not Easy To Slip During Use..
Wide Application: Atpeam Solid Valve Spring Compressor C Clamp Service Kit Fits For Most Cars, Motorcycle, Small Van, Atv, Utv And Other Small Engine Vehicles And Equipment, Suitable For Professional Mechanics And Beginners..
Function: The Valve Spring Compressor C Clamp Service Tool Kit Is Designed To Conveniently Install/Remove The Valve On Most Cylinder Heads By Compressing The Valve When Removing And Installing Most Cars, Motorcycles Or Other Small Engines..
Package List: Atpeam 10Pcs Valve Spring Removal Tool Set With Solid C Clamp Includes 5 X Push Adapters (16Mm, 19Mm, 23Mm, 25Mm, 30Mm), 3 X Extension Screws (3’’, 4.4’’ & 4.4’’), 1 X C-Type Jaw And 1 X 4’’ Hand Lever, The Length Of Each Collet Is 1 & 3/4’’, Max Jaw Opening Is 9-1/2’’..
Features
- Premium Quality: Each part of the valve spring compressor clamp tool kit is constructed from high-quality metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion.
- Package List: ATPEAM 10pcs valve spring removal tool set with solid C clamp includes 5 x push adapters (16mm, 19mm, 23mm, 25mm, 30mm), 3 x extension screws (3 , 4.4 & 4.4 ), 1 x C-type jaw and 1 x 4 hand lever, the length of each collet is 1 & 3/4 , max jaw opening is 9-1/2 .
- Superior C Clamp Jaw: Our auto valve spring compressor C clamp tool set using 1.7mm thick heat treated steel with black oxide treatment to provide superior strength and corrosion resistance and withstand the stress of your compressed springs, not easy to bend and deform while compressing. The two end of the C clamp are aligned in a standard straight line, not easy to slip during use.
- Function: The valve spring compressor C clamp service tool kit is designed to conveniently install/remove the valve on most cylinder heads by compressing the valve when removing and installing most cars, motorcycles or other small engines.
- Wide Application: ATPEAM solid valve spring compressor C clamp service kit fits for most cars, motorcycle, small van, ATV, UTV and other small engine vehicles and equipment, suitable for professional mechanics and beginners.
- See more on Amazon...
Brand: ATP | Manufacturer: ATP technic
See On Amazon #5
SMOTIVEPRO 8in Valve Spring Compressor Tool Universal Automotive Engine Valve Spring Removal Tool
Asin: B0BN5HZ1ZP | Model: VT17-1 | PartNumber: VT17-1
Material&Specification:Please Make Sure That The Size Of The Product Is Suitable For Your Car Series.This Valve Spring Compression Tool Constructed From High-Quality Metal,With The Feature Of Durable,Resisting Rust And Corrosion. Works With A Cylinder Head On Your Workbench Or Any Ovh Head Removed From The Block; 3-Inch To 6.5-Inch (7.6Cm To 16.5Cm) Capacity With A 6-Inch (15.2Cm) Throat Clearance..
Longer Handle:The Extended Ergonomic Rubber Handle Apply You Force Keep Spring Compressor And Avoid Slip..
Precision Thread Rod:The Thread Rod Are Extended And Reinforced With Riveting For Strong And Stable Performance..
Easy Compression:The Valve Spring Compress Tool Is Professional Valve Spring Removal Tool For Quick And Easy Compress, Lift And Release. Also Correctly Fitting, Installing And Removing Automotive Valve Springs..
Features
- APPLICATION:This Valve Spring Compress is suitable for small to medium engines with overhead valves and diesel engines with deep seated valves and on many OHV petrol/diesel engines.
- EASY COMPRESSION:The Valve Spring Compress Tool is professional valve spring removal tool for Quick and easy compress, lift and release. Also correctly fitting, installing and removing automotive valve springs.
- MATERIAL&SPECIFICATION:Please make sure that the size of the product is suitable for your car series.This valve spring compression tool constructed from high-quality metal,with the feature of durable,resisting rust and corrosion. Works with a cylinder head on your workbench or any OVH head removed from the block; 3-inch to 6.5-inch (7.6cm to 16.5cm) capacity with a 6-inch (15.2cm) throat clearance.
- PRECISION THREAD ROD:The thread rod are extended and reinforced with riveting for strong and stable performance.
- LONGER HANDLE:The extended ergonomic rubber handle apply you force keep spring compressor and avoid slip.
- See more on Amazon...
Brand: SMOTIVEPRO | Manufacturer: SUNBRIGHT TOOLS CO.,LTD
Warranty: 2 YEAR
See On Amazon #6
OEMTOOLS 25355 24" Straight Edge Steel Precision Ground Machined Straight Edge, Use with Feeler Gauges for Accurate Automotive Repairs, Checks Cylinder Heads and Engine Blocks, Made in The USA
Asin: B076ZYJPGR | Model: 25355 | PartNumber: 25355 | Ean: 0076812253552 | UPC: 076812253552
Unparalleled Accuracy: Precision Ground Tool Edge To Plus Or Minus 0.001 Inch Accuracy; These Straight Edges Eliminate The Imprecision Of Visually Inspecting For Flaws And Warpage.
Product Specifications: 1/4" Thick Steel Machinist Straight Edge; 24" X 2" X .5"; Durable Powder Coat Finish; Convenient Hang Hole; Includes Reusable Protective Edge; Made In The Usa.
Durable Steel: Straight Edge Crafted In The Usa With Cold Rolled Steel; Straight Edge Machinist Tool Features A Durable Black Powder Coat Finish That Resists Rust And Corrosion.
Broad Applications: This Machinist Edge Allows You To Inspect For Flaws On Engine Blocks, Cylinder Heads, Fly Wheels, Main Bearing Saddles, Cam Bearing Saddles, Cam Covers, Bell Housings, And More.
Features
- Precision Straight Edge: Use this 2' metal straight edge with your feeler gauges to complete automotive engine repairs; Straight edge tool measures heads, blocks, and flywheels for distortion
- Broad Applications: This machinist edge allows you to inspect for flaws on engine blocks, cylinder heads, fly wheels, main bearing saddles, cam bearing saddles, cam covers, bell housings, and more
- Unparalleled Accuracy: Precision ground tool edge to plus or minus 0.001 inch accuracy; These straight edges eliminate the imprecision of visually inspecting for flaws and warpage
- Durable Steel: Straight edge crafted in the USA with cold rolled steel; Straight edge machinist tool features a durable black powder coat finish that resists rust and corrosion
- Product Specifications: 1/4 Thick Steel Machinist Straight Edge; 24 x 2 x .5; Durable Powder Coat Finish; Convenient Hang Hole; Includes Reusable Protective Edge; Made in the USA
- See more on Amazon...
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 0.10 x 24.00 x 2.25 inches | Weight: 3.15 Pounds
Warranty: OEMTOOLS Limited Lifetime
See On Amazon #7
OEMTOOLS 24429 Spring Compressor for Ford 3-Valve Engines, Ford Valve Spring Compressor for 4.6L and 5.4L Engine Repair, Rocker Arm Remover, Professional Mechanic s Tool
Asin: B075ZHX1BS | Model: 24429 | PartNumber: 24429 | Ean: 0076812244291 | UPC: 076812244291
Built To Last: This Heavy Duty Spring Compressor Is Constructed Of Steel With A Black Oxide Finish, Resulting In These Spring Compressors Resisting Rust And Corrosion; Valve Spring Removal Tool Is Built To Last A Lifetime.
Compact Size: Small Valve Spring Compressor Makes It Easier To Work In Compact Areas; Lightweight Valve Retainer Tool Lessens Hand Fatigue While Replacing And Removing Valve Springs And Servicing Camshafts.
Superior Design: Our Valve Spring Compression Tool Is Slanted, Which Prevents It From Damaging Metal While Using The Engine Springs Compression Tool; Valve Spring Remover Gets The Job Done Fast And Safely.
Works With Ford Valve Springs: Our Valve Spring Kit Is Designed To Work With The Cylinder Head In Ford 3-Valve 4.6L And 5.4L Engines; Easily Service Camshafts, Valve Seals, Valve Springs And Retainers With This Ford Valve Spring Tool.
Features
- FAST AND EFFICIENT: This valve spring compressor tool compresses the valve without removing the camshaft; Makes removing and replacing valve springs, Ford rocker arms, roller followers and lash adjusters quick and easy
- WORKS WITH FORD VALVE SPRINGS: Our valve spring kit is designed to work with the cylinder head in Ford 3-valve 4.6L and 5.4L engines; Easily service camshafts, valve seals, valve springs and retainers with this Ford valve spring tool
- BUILT TO LAST: This heavy duty spring compressor is constructed of steel with a black oxide finish, resulting in these spring compressors resisting rust and corrosion; Valve spring removal tool is built to last a lifetime
- SUPERIOR DESIGN: Our valve spring compression tool is slanted, which prevents it from damaging metal while using the engine springs compression tool; Valve spring remover gets the job done fast and safely
- COMPACT SIZE: Small valve spring compressor makes it easier to work in compact areas; Lightweight valve retainer tool lessens hand fatigue while replacing and removing valve springs and servicing camshafts
- See more on Amazon...
First Available: 02/13/2018
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 1.30 x 7.20 x 4.60 inches | Weight: 0.75 pounds
Warranty: OEMTOOLS Limited Lifetime
See On Amazon #8
DASBET Valve Spring Compressor C Clamp Service Kit Valve Spring Removal Tool with Solid C Clamp for ATV, Car, Motorcycle,Small Engine Vehicle Equipment
Asin: B074ZHY3WJ | Model: 5864303842 | PartNumber: 5864303842 | Ean: 0687925995750 | UPC: 687925995750
Package Content: The Dasbet Auto Solid Valve Spring Compressor C Clamp Service Kit Includes A Wide C Clamp, 3 Extension Rods (3" 4.4" 4.4"), 5 Collet Adapters (16 19 23 25 30Mm), And A 4-Inch Hand Lever. Length Of Each Collet: 1 & 3/4";Max Jaw Opening 9-1/2"..
Easy Storage And Transport: The C Clamp Service Kit Comes With A Plastic Blow-Molded Carrying Case, Easy For Transport,Storage And Quick Organization. Our Products Are 100% Brand New. If You Think The Item You Received Is Used, Please Contact Us For A Replacement..
Wide Application: The Valve Spring Installer Remover Compressor Tool Set Fits For Most Car, Small Van, Atv, Utv And Motorcycle Engines. Suitable For Professional Mechanics And Beginners..
Premium Quality: This Solid Valve Spring Compressor Tool Is Constructed From High-Quality Metal With A Black-Oxide Finish, Durable, Resisting Rust And Corrosion..
Features
- Function: The 10pcs Overhead Solid Valve Spring Compressor Installer Remover Tool is used to compress valve springs or safely dispose of cylinder heads when removing and installing most cars, motorcycles or other small engines.
- Premium Quality: This Solid Valve Spring Compressor Tool is constructed from high-quality metal with a black-oxide finish, durable, resisting rust and corrosion.
- Package Content: The DASBET Auto Solid Valve Spring Compressor C Clamp Service Kit includes a wide C clamp, 3 extension rods (3 4.4 4.4), 5 collet adapters (16 19 23 25 30mm), and a 4-inch hand lever. Length of each collet: 1 & 3/4;Max jaw opening 9-1/2.
- Wide Application: The Valve Spring Installer Remover Compressor Tool Set fits for Most Car, Small Van, ATV, UTV and Motorcycle Engines. Suitable for professional mechanics and beginners.
- Easy Storage and Transport: The C clamp service kit comes with a plastic blow-molded carrying case, easy for transport,storage and quick organization. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
- See more on Amazon...
Brand: DASBET | Manufacturer: DASBET
See On Amazon #9
ATPEAM Auto Valve Spring Compressor C Clamp Tool Set Service Kit Suitable for Motorcycle, ATV, Car, Small Engine Vehicle Equipment
Asin: B093GDXN1H
C' Clamp Jaw: Strong And Durable. Using 1.7Mm Thick Heat Treated Steel With Black Oxide Treatment,Not Easy To Bend And Deform While Compressing. And The Two End Of The 'C' Clamp Are Aligned In A Standard Straight Line,Not Easy To Slip During Use..
Easy Storage: This Set Comes With A Heavy-Duty Plastic Blow-Molded Carrying Case For Easy Transportation, Safe Storage, And Quick Organization..
Various Application: Suitable For Your Motorcycle, Atv, Utv, Car, And Other Small Engine Vehicles And Equipment; All Collets Are 1.75 Inches (4.4Cm) Long With 9.5-Inch (24.1Cm) Maximum Jaw Openings.
Valve Removal & Installation: Designed To Conveniently Install/Remove The Valve On Most Cylinder Heads By Compressing The Valve..
Features
- Durable Material: Each part is constructed from high-quality metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion
- Valve Removal & Installation: Designed to conveniently install/remove the valve on most cylinder heads by compressing the valve.
- C' clamp Jaw: Strong and durable. Using 1.7mm thick Heat Treated steel with black oxide treatment,not easy to bend and deform while compressing. And the two end of the 'C' Clamp are aligned in a standard straight line,Not easy to slip during use.
- Various Application: Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment; All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings
- Easy Storage: This set comes with a heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
- See more on Amazon...
Brand: ATPEAM | Manufacturer: ATPEAM
Dimensions: 2.00 x 13.00 x 8.00 Inches
See On Amazon #10
Dreyoo Valve Adjustment Tool Jam Nut, Slotted Valve Adjusting Stud, Valve Grinding Tool Compatible with Honda/Nissan/Toyota/Japanese Auto Vehicle Engines, Valve Lapping Guiding Removal Tool (10mm)
Asin: B0C1P91R5M
Easy To Use: Check The Position Of The Valve Studs, Use The Valve Adjustment Tool To Aim At The Valve Studs, Check The Side Profile To See If The Screwdriver Blade Is Properly Engaged.
Product Specification: You Will Get 1 X Valve Adjustment Tool For 10Mm Jam Nut, The Side Handle Is 8 Inch In Length, Provides Leverage For Loosening Tight Jam Nuts, A Practical Tool In Your Daily Life.
Durable And Practical: The Valve Guiding Removal Tool Is Made Of Quality Material, Which Is Durable And Can Be Applied For A Long Time, This Tool Is Useful For Car Enthusiast, It Is Convenient For Them To Keep In The Tool Case Which Is Convenient And Practical For Them To Use For The Vehicle.
Compatibility: Compatible With Honda/Vtec/Toyota/Nissan And Other Japanese Automobile Engines Valve Lash Adjustment, And Valves With 10Mm Clamp Nuts And Slotted Valve Adjustment Studs.
Features
- Integrated Design: the integrated design eliminates the cumbersome use of multiple tools for accurate and easy valve adjustment; The built in profile allows viewing of the screwdriver blade position for more accurate engagement with the valve studs
- Compatibility: compatible with Honda/VTEC/Toyota/Nissan and other Japanese automobile engines valve lash adjustment, and valves with 10mm clamp nuts and slotted valve adjustment studs
- Easy to Use: check the position of the valve studs, use the valve adjustment tool to aim at the valve studs, check the side profile to see if the screwdriver blade is properly engaged
- Durable and Practical: the valve guiding removal tool is made of quality material, which is durable and can be applied for a long time, this tool is useful for car enthusiast, it is convenient for them to keep in the tool case which is convenient and practical for them to use for the vehicle
- Product Specification: you will get 1 x valve adjustment tool for 10mm jam nut, the side handle is 8 inch in length, provides leverage for loosening tight jam nuts, a practical tool in your daily life
- See more on Amazon...
Brand: Dreyoo | Manufacturer: Dreyoo
See On Amazon #11
ARES 15094 10mm Jam Nut Valve Adjustment Tool Easily Loosens Tight Jam Nuts with Window Cut Out for Positioning for Honda, for Toyota, for Nissan, and Other Japanese Engines
Asin: B0BSNWZGRW | Model: 15094 | PartNumber: 15094 | Ean: 0840129910183 | UPC: 840129910183
Application: This Jam Nut Adjustment Tool Fits Valves With 10Mm Jam Nuts And Slotted Valve Adjusting Studs And Is Compatible With Honda Vtec, Is Compatible With Toyota, Is Compatible With Nissan, As Well As Other Japanese Vehicle Engines..
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We’Re Proud To Help This Great Organization..
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools That Make An Impact. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Jam Nut Valve Adjustment Tool, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Design: With A 7-1/2” Long Adjustment Handle, This Adjustment Tool Offers Sufficient Leverage For Loosening Tight Jam Nuts. The Socket Also Features A Window Cut Out That Allows For Visibility Of The Flat Screwdriver End, Making It Simple To Engage The Valve Stud And Adjust More Accurately While Tightening The Jam Nut..
Features
- SPECIFICATIONS: This jam nut valve adjustment tool offers simple valve clearance adjustment on a variety of Japanese vehicle engines, easily loosening even the toughest and tightest jam nuts. This adjustment tool features a 10mm hex size.
- DESIGN: With a 7-1/2 long adjustment handle, this adjustment tool offers sufficient leverage for loosening tight jam nuts. The socket also features a window cut out that allows for visibility of the flat screwdriver end, making it simple to engage the valve stud and adjust more accurately while tightening the jam nut.
- APPLICATION: This jam nut adjustment tool fits valves with 10mm jam nuts and slotted valve adjusting studs and is compatible with Honda VTEC, is compatible with Toyota, is compatible with Nissan, as well as other Japanese vehicle engines.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Jam Nut Valve Adjustment Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we re proud to help this great organization.
- See more on Amazon...
Brand: ARES | Manufacturer: ARES
Dimensions: 0.98 x 10.82 x 1.96 inches
Warranty: Performance Assurance
See On Amazon #12
Orion Motor Tech LS Valve Spring Compressor Tool, Valve Spring Removal Tool Compatible with LS1 LS2 LS3 LS6 4.8 5.3 5.7 6.0 6.2 Engines, Automotive Valve Seal Adjustment Removal Installation Tool
Asin: B0CLGF2PQX | Model: 0004-00_NEW | PartNumber: 0004-00_NEW
Easy To Use: Set Up This Automotive Valve Spring Removal Tool In A Flash Thanks To Its Clear Design And Instructions; Depress The Valve Springs By Tightening The Upper Nut With The Provided Wrench.
Convenient Storage & Transport: This Ls Valve Spring Remover And Installer Is Packed With Custom-Fit Epe Foam So Everything Stays Well Secured And Organized During Transport.
Durable Construction: Our Ls Engine Spring Compressor Is Made Of Heat-Treated Carbon Steel And Is Coated For Even Greater Strength And Corrosion Resistance.
Wide Application: Our Versatile Valve Spring Removal Tool Is Compatible With 4.8L, 5.3L, 5.7L, 6.0L, And 6.2L Ls Engines Of A Wide Range Of Vehicle Models.
Features
- VALVE TRAIN SERVICING: This Orion Motor Tech LS valve spring compressor tool kit includes everything you need to quickly remove broken or weak LS valve springs and replace with new ones
- WIDE APPLICATION: Our versatile valve spring removal tool is compatible with 4.8L, 5.3L, 5.7L, 6.0L, and 6.2L LS engines of a wide range of vehicle models
- EASY TO USE: Set up this automotive valve spring removal tool in a flash thanks to its clear design and instructions; depress the valve springs by tightening the upper nut with the provided wrench
- DURABLE CONSTRUCTION: Our LS engine spring compressor is made of heat-treated carbon steel and is coated for even greater strength and corrosion resistance
- CONVENIENT STORAGE & TRANSPORT: This LS valve spring remover and installer is packed with custom-fit EPE foam so everything stays well secured and organized during transport
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Warranty: 1 year
See On Amazon #13
Orion Motor Tech Universal Valve Spring Compressor Tool, Valve Spring Removal Tool & Adjustment Tool with 1" & 1-3/16" Adapters, Direct Action Valve Spring Compression Tool for Cars Trucks and More
Asin: B08DR2L4G8
Direct Action: The Long Direct-Acting Lever Improves Work Efficiency And Lets You Get Into Hard-To-Reach Spaces.
Satisfaction Guaranteed: Orion Motor Tech Backs This Handy Valve Spring Compressor With Our Usual Strong Warranty And Friendly 24/7 Customer Service, Ensuring That You'll Enjoy Its Use For Years To Come!.
Ergonomic Handle: The Rugged Handle's Ergonomic Design Reduces Hand Fatigue On Longer Jobs, While Its Non-Slip Rubber Cover Provides Consistent Dependable Grip.
Superior Durability: Constructed From Structural-Grade 45# Steel, This Valve Spring Compression Tool Has Been Galvanized To Give You Even More Wear And Corrosion Resistance.
Features
- UNIVERSAL COMPRESSOR: This valve spring compressor by Orion Motor Tech offers a wide jaw range (1-3/8" to 5-5/8") and 5-7/8" throat clearance to let you adjust, remove, and install the valve springs on most cars and light trucks; the two adapters allow work on springs up to 1-3/16" in petrol and diesel engines
- SUPERIOR DURABILITY: Constructed from structural-grade 45# steel, this valve spring compression tool has been galvanized to give you even more wear and corrosion resistance
- DIRECT ACTION: The long direct-acting lever improves work efficiency and lets you get into hard-to-reach spaces
- ERGONOMIC HANDLE: The rugged handle's ergonomic design reduces hand fatigue on longer jobs, while its non-slip rubber cover provides consistent dependable grip
- SATISFACTION GUARANTEED: Orion Motor Tech backs this handy valve spring compressor with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy its use for years to come!
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Weight: 5.60 pounds
Warranty: 1 Year
See On Amazon #14
Guteauto Engine Air Valve Holder Pressure Pipe Cylinder Leakage Testing Assistant Tool with Ball Valve M12 M14 Thread to 1/4 NPT Universal for Mustang Ford GM Trucks LS Engine
Asin: B0C56ZW4Q9
Install The Joint On The Location Of The Spark Plug When Using A 300Psi/20Bar Pressure Tube With M12 And M14 Thread To Npt. For Convenience, There Is A 1/4" Npt Quick Coupler Male Plug For The Air Compressor And Pump. Take Note Of The Operating Pressure Range Of 30Psi≤P≤110Psi(2Bar≤P≤8Bar)..
Package Content -Package Content - 1 Pc Engine Air Valve Holder Pressure Pipe. Please Double-Check Before Making A Purchase. Please Be Aware That The Working Pressure Is 30Psi≤P≤110Psi And Not The Mark 4500 Psi On The Tube Which Indicates Air Working Pressure..
Use Sturdy Rubber Tube And Brass Fitting Connections For Durability Against Abrasion, Corrosion, And High Pressure. The Valve Is Kept From Falling Into The Combustion Chamber By Air Pressure..
When Replacing Valve Springs Or Valve Stem Seals, Pressurized Air Can Help Maintain The Valve Closed By Pressurizing The Cylinder. Assist In Swiftly Determining The Cause Of Low Cylinder Pressure (Exhaust Pipe Leak Or Throttle Leak).
Features
- Used with M14 or M12 spark plugs in gasoline engine cylinders; the spark plug must be removed prior to installation of this tool. The majority of LS engines may be used in gasoline-powered vehicles like cars, trucks, boats, motorcycles, ATVs, and UTVs. Not for use with diesel engines
- When replacing valve springs or valve stem seals, pressurized air can help maintain the valve closed by pressurizing the cylinder. assist in swiftly determining the cause of low cylinder pressure (Exhaust pipe leak or Throttle leak)
- Install the joint on the location of the spark plug when using a 300Psi/20Bar pressure tube with M12 and M14 thread to NPT. For convenience, there is a 1/4 NPT quick coupler male plug for the air compressor and pump. Take note of the operating pressure range of 30psi P 110psi(2bar P 8bar).
- Use sturdy rubber tube and brass fitting connections for durability against abrasion, corrosion, and high pressure. The valve is kept from falling into the combustion chamber by air pressure.
- PACKAGE CONTENT -PACKAGE CONTENT - 1 Pc Engine Air Valve Holder Pressure Pipe. Please double-check before making a purchase. Please be aware that the working pressure is 30psi P 110psi and not the mark 4500 PSI on the tube which indicates air working pressure.
- See more on Amazon...
Brand: Guteauto | Manufacturer: Guteauto
Warranty: 1 year
See On Amazon #15
AFEISOL Door Spring Compressor Tool for GM Cars and Trucks-Door Spring Tool Performance Tool
Asin: B0CHYQX13Q | Model: FEIS98R | PartNumber: FEIS98R
Premium Quality: The Door Spring Compressor Tool Is Made Of High Quality Alloy Steel Material, Stable Structure, Strong And Durable, Can Work Normally In A Variety Of Harsh Environments And Conditions, And Has A Long Service Life..
Buy With Confidence: We Provide Lifelong After-Sales Service For Customers, If You Have Any Problems With Our Door Spring Tool, Please Feel Free To Inform Us, We Will Do Our Best To Solve Your Problem Within 24 Hours, So That You Are 100% Satisfied..
Fit Vehicles: This Door Spring Tool Works On Most General Motors And Light Trucks..
Function: Use Our Door Spring Compressor Tool For Better Alignment During Installation And Easily Get The Job Done Without Damaging The Door Or Hurting Yourself. Save Time And Effort Removing And Replacing Door Springs..
Features
- Door Spring Tool: Easy to remove and install, safe to remove and install door springs, is an essential tool for anyone replacing or repairing general purpose door springs. Can be use with 1/2" wrench or socket.
- Function: Use our door spring compressor tool for better alignment during installation and easily get the job done without damaging the door or hurting yourself. Save time and effort removing and replacing door springs.
- Premium Quality: The door spring compressor tool is made of high quality alloy steel material, stable structure, strong and durable, can work normally in a variety of harsh environments and conditions, and has a long service life.
- Fit Vehicles: This door spring tool works on most General Motors and light trucks.
- Buy With Confidence: We provide lifelong after-sales service for customers, if you have any problems with our door spring tool, please feel free to inform us, we will do our best to solve your problem within 24 hours, so that you are 100% satisfied.
- See more on Amazon...
Brand: AFEISOL | Manufacturer: FEISOO
Warranty: 1 year warranty
See On Amazon #16
QWORK Valve Lapping Tool Kit, Universal Valve Lapping Attachment Tool for Grinding Small Engine, 5 Suction Plates, 1000rpm to 1250rpm
Asin: B0BJYLC936 | Model: QS8686 | PartNumber: QS8686 | Ean: 0795973814616 | UPC: 795973814616
Easy To Use: Clean All Carbon Deposits On Valves And Valve Guides, Apply A Thin Layer Of Engine Valve Abrasive (Not Included) Around The Valve And Install The Valve In The Valve Guide, Secure The Correct Size Valve Suction Tool Press Down On The Valve Head And Slowly Rotate The Small Abrasive Tool With A Power Drill Until You Get The Right Finish..
Package Includes: 1 Set Valve Lapping Tool With 5 Suction Plates. Power Drill And Engine Valve Grinding Compound Not Included. Enjoy A Smooth & Frustration Free Experience With Our 100% Satisfied Service In One Month..
With 5 Suction Plates: Includes 16Mm (5/8") 20Mm (3/4"), 30Mm (1-3/16"), 35Mm (1-3/8") And 45Mm (1-3/4") 5 Pcs Attachable Suction Cups, Synthetic Rubber Suction Cups, Oil And Uv Resistant, Fit And Secure Various Valve Sizes In Your Lawn Mower, Chainsaw, Car Or Motorcycle..
Working Speed: Minimum Operating Speed 1000 Rpm; Maximum Operating Speed 1250 Rpm, The Direction Can Be Changed Automatically For Easy Valve Insertion..
Features
- Install Valve Accurately: Use this tool to correct surface irregularities and eliminate subsurface damage to new valves for flawless installation into valve guides, help you install valves accurately, properly fit and seat valves into your vehicle engine.
- Working Speed: Minimum operating speed 1000 rpm; maximum operating speed 1250 rpm, the direction can be changed automatically for easy valve insertion.
- Easy to Use: Clean all carbon deposits on valves and valve guides, apply a thin layer of engine valve abrasive (not included) around the valve and install the valve in the valve guide, secure the correct size valve suction tool Press down on the valve head and slowly rotate the small abrasive tool with a power drill until you get the right finish.
- With 5 Suction Plates: Includes 16mm (5/8) 20mm (3/4), 30mm (1-3/16), 35mm (1-3/8) and 45mm (1-3/4) 5 Pcs attachable suction cups, synthetic rubber suction cups, oil and UV resistant, fit and secure various valve sizes in your lawn mower, chainsaw, car or motorcycle.
- Package Includes: 1 Set valve lapping tool with 5 suction plates. Power drill and engine valve grinding compound not included. Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #17
For LS Engines Valve Spring Compressor Tool for 4.8L, 5.3L, 5.7L, 6.0L, 6.2L, LS6, LS2, LS1, LS3, LQ9, LQ4, LS Engines
Asin: B0BM4C68GH
【Built To Last】 Precisely Machined From Fully Heat Treated Alloy Steel With A Black Oxide Finish, Higher Strength, Better Corrosion And Dust Resistance, Ensures Reliable And Long-Lasting Durability..
【100% Satisfaction Guarantee】 Your Satisfaction Is Our Priority. We Strive To Give Our Customers Excellent Service. All Sixcow Products Support 30-Day Money-Back Guarantee, 12-Month Warranty For Quality-Related Issues. Simply Return It For Your Warranty..
【Easy To Use】 Simply Install The Spring Compressor Body Using The Two Cap Screws Provided. Slide The H-Beam And Stainless Washer Over The Studs, Keeping The Reinforced Ridges Up Will Allow Greater Travel Of The Compressor. Install The Nut And Tighten Against The H-Beam Until The Valve Keepers Can Be Removed. Pick Up The Keeper. Loosen The Nut And Carefully Remove The H-Beam And Valve Springs. Install New Springs In Reverse Order..
【Perfect Design】 This Engines Valve Spring Compressor Tool Is Specifically Designed To Remove Or Replace Valve Springs And Remove The Valve Keepers. Adjustable Screw, Easy To Compress The Valve Springs. H-Beam Design, Firmly Hold And Compress The Springs Without Cracking Or Running Out. Compact Size For Easy Storage In Any Tool Case..
Features
- Universal Compatibility Must-have item for all LS engine valve, Chevy GM LS1, LS2, & LS6 style cylinder heads, such as LS6, LS2, LS1, LS3, LQ9, LQ4. Suitable for 4.8, 5.3, 5.7, 6.0, 6.2L LS Engines. Also work on any LS engine for Silverado, Firebird, Chevy, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more.
- Perfect Design This Engines Valve Spring Compressor Tool is specifically designed to remove or replace valve springs and remove the valve keepers. Adjustable screw, easy to compress the valve springs. H-Beam design, firmly hold and compress the springs without cracking or running out. Compact size for easy storage in any tool case.
- Built to Last Precisely machined from fully heat treated alloy steel with a black oxide finish, higher strength, better corrosion and dust resistance, ensures reliable and long-lasting durability.
- Easy to Use Simply install the spring compressor body using the two cap screws provided. Slide the H-Beam and stainless washer over the studs, keeping the reinforced ridges up will allow greater travel of the compressor. Install the nut and tighten against the H-beam until the valve keepers can be removed. Pick up the keeper. Loosen the nut and carefully remove the H-beam and valve springs. Install new springs in reverse order.
- 100% Satisfaction Guarantee Your satisfaction is our priority. We strive to give our customers excellent service. All Sixcow products support 30-Day money-back guarantee, 12-Month warranty for quality-related issues. Simply return it for your warranty.
- See more on Amazon...
Brand: sixcow | Manufacturer: sixcow
See On Amazon #18
Orion Motor Tech Valve Spring Compressor Tool Kit, Valve Keeper Remover Installer Set with Valve Lapping Tools, Overhead Engine Valve Adjustment Tools for Valve Retainer Stem Seal Removal Installation
Asin: B0B7HD883J | Model: FBA_SCS000500 | PartNumber: FBA_SCS000500
Secure Control: The Valve Keeper Removal Tools' Built In Magnets Hold Parts Securely During Operation, Maximizing Efficiency And Precision And Reducing Engine Damage.
Superior Durability: Constructed From High Quality Aluminum Alloy And Carbon Steel Build With An Oxide Coating, These Heavy Duty Valve Adjustment Tools Ensure Excellent Strength And Corrosion Resistance For Years Of Dependable Service.
Convenient Grinding: Our Valve Retainer And Spring Remover Set Comes With 2 Dual Ended Valve Lapping Tools To Grind And Polish Valve Heads And Seats, Facilitating Engine Maintenance And Rebuilding.
Wide Compatibility: This Valve Spring Compressor Set Fits Valve Retainers 0.2" To 0.3" And 0.3" To 0.4" (4.5 To 7.5 And 7.9 To 9.5 Mm) Wide On A Variety Of Gas And Diesel Overhead Engines.
Features
- HASSLE FREE VALVE SERVICE: Orion Motor Tech's valve keeper remover and installer tool kit helps you replace valve springs and valve keepers quickly and easily without removing the engine head
- WIDE COMPATIBILITY: This valve spring compressor set fits valve retainers 0.2 to 0.3 and 0.3 to 0.4 (4.5 to 7.5 and 7.9 to 9.5 mm) wide on a variety of gas and diesel overhead engines
- SECURE CONTROL: The valve keeper removal tools' built in magnets hold parts securely during operation, maximizing efficiency and precision and reducing engine damage
- CONVENIENT GRINDING: Our valve retainer and spring remover set comes with 2 dual ended valve lapping tools to grind and polish valve heads and seats, facilitating engine maintenance and rebuilding
- SUPERIOR DURABILITY: Constructed from high quality aluminum alloy and carbon steel build with an oxide coating, these heavy duty valve adjustment tools ensure excellent strength and corrosion resistance for years of dependable service
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Warranty: 1-year warranty
See On Amazon #19
KZINO 8inch Valve Spring Compressor, Universal Automotive Engine Valve Spring Compression Tool
Asin: B0BP1ZT8HN
[Design]：This Valve Spring Compression Tool Is Suitable For Use On Small To Medium Engines With Overhead Valves And Diesel Engines With Deep-Seated Valves, As Well As Many Ohv Petrol/Diesel Engines. The Direct Action Engine Valve Spring Compressor Tool Offers Better Visibility Of Valve Spring Retainers Located In Difficult Access Areas..
[Service Warranty]：As The Manufacturer And Brand Owner, We Specialize In Auto Tools And Are Committed To Improving Our Products To Achieve 100% Customer Satisfaction. We Offer The Best Quality Service By Providing A 12-Month Warranty. If You Experience Any Issues With The Product, Please Contact Us For Product Troubleshooting, Replacement, Or A Refund..
[Easy To Use]：This Professional Valve Spring Removal Tool Allows For Quick And Easy Compress, Lift, And Release Of Automotive Valve Springs, As Well As Correct Fitting And Installation..
[Premium Quality]：The Tool Features A Parallel Lift Action With Automatic Lock And A Red Plastic Comfort Grip Handle To Help Keep The Tool In Place And Provide Slip-Free Leverage, Reducing User Fatigue And Increasing Productivity..
Features
- [SPECIFICATIONS] Constructed from high-quality metal, this valve spring compression tool is durable, rust-resistant, and corrosion-resistant. It has a 3- to 6.5-inch (7.6cm to 16.5cm) capacity and a 6-inch (15.2cm) throat clearance, making it suitable for use with a cylinder head on a workbench or any OVH head removed from the block. Please ensure that the product size is compatible with your car series.
- [PREMIUM QUALITY] The tool features a parallel lift action with automatic lock and a red plastic comfort grip handle to help keep the tool in place and provide slip-free leverage, reducing user fatigue and increasing productivity.
- [DESIGN] This valve spring compression tool is suitable for use on small to medium engines with overhead valves and diesel engines with deep-seated valves, as well as many OHV petrol/diesel engines. The direct action engine Valve Spring Compressor tool offers better visibility of valve spring retainers located in difficult access areas.
- [EASY TO USE] This professional valve spring removal tool allows for quick and easy compress, lift, and release of automotive valve springs, as well as correct fitting and installation.
- [SERVICE WARRANTY] As the manufacturer and brand owner, we specialize in auto tools and are committed to improving our products to achieve 100% customer satisfaction. We offer the best quality service by providing a 12-month warranty. If you experience any issues with the product, please contact us for product troubleshooting, replacement, or a refund.
- See more on Amazon...
Brand: KZINO | Manufacturer: KZINO
See On Amazon #20
Hromee Engine Air Valve Holder and Cylinder Leakage Testing Assistant Tool with M12 or M14 Thread for GM Chevy LS1 LS3 LS6
Asin: B0CQLXV7LS | Model: HR4145 | PartNumber: HR4145
Used For The Gasonline Engine Cylinder With M14 Or M12 Spark Plug, Have To Move Out Spark Plug Before Install This Tool. It Can Be Used For Gasoline Engines, Such As Cars, Trucks, Boats, Motorcycles, Atvs, Etc. Not To Be Used In Diesel Engine Vehicles..
300Psi/20Bar Pressure Tube With M12 And M14 Thread To Npt, Install The Joint On The Position Of The Spark Plug. There Have A 1/4" Npt Air Compressor Air Pump Quick Coupler Male Plug For Easy Work. Note The Working Pressure Range 30Psi≤P≤110Psi(2Bar≤P≤8Bar)..
Adopt With Durable Rubber Tube And Brass Fitting Connectors, Anti Wear, High Pressure Resistance, Anti Corrosion And Abrasion. Air Pressure Avoid The Valve To Falling Into The Combustion Chamber..
When The Cylinder Is In The Compression Stroke. If The Air Tightness Of The Engine Is Not Good Enough, You Can Hear The Continuous Leakage Of Air. Diagnosis Of Damaged Parts By Listening To The Leak Position..
Features
- Pressurizes the cylinder to help hold valves closed with compressed air. So The oil seal of the valve can be replaced without dismantling.
- When the cylinder is in the compression stroke. If the air tightness of the engine is not good enough, you can hear the continuous leakage of air. Diagnosis of damaged parts by listening to the leak position.
- Used for the gasonline engine cylinder with M14 or M12 spark plug, have to move out spark plug before install this tool. It can be used for gasoline engines, such as cars, trucks, boats, motorcycles, ATVs, etc. Not to be used in diesel engine vehicles.
- Adopt with durable rubber tube and brass fitting connectors, anti wear, high pressure resistance, anti corrosion and abrasion. Air pressure avoid the valve to falling into the combustion chamber.
- 300Psi/20Bar pressure tube with M12 and M14 thread to NPT, install the joint on the position of the spark plug. There have a 1/4 NPT air compressor air pump quick coupler male plug for easy work. Note the working pressure range 30psi P 110psi(2bar P 8bar).
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 1.50 x 6.00 x 4.00 inches | Weight: 0.38 pounds
Warranty: 1 year warranty
See On Amazon #21
Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs
Asin: B08BYHR63Q | Model: SCK000100 | PartNumber: SCK000100 | Ean: 0783906168448 | UPC: 783906168448
Valve Spring Compressor Tools -Come Packaged In A High-Impact Case That Holds Each Part Securely. The Parts Will Remain Organized And Safe While Stored Or In Transport, And The Case Stacks And Stores Away Conveniently.1 X Spring Compressor ""C"" Clamp ,5 X Adaptors ,3 X Extension Screws ,1 X Compression Bar ,1 X Storage Case.
Valve Spring Compressor Set Included:(5) Metric Collets – 16Mm, 19Mm, 23Mm, 25Mm, 30Mm, (3) Extension Screws, (1) Spring Compressor U-Clamp With A Maximum Jaw Opening Of 9.5 Inches, (1) Compression Bar, And (1) Storage Case For Your Convenience The Items Are The Same As The Pictures.We Provide Carefree Return, Our Aim At Pursuing The Maximum Satisfaction Of Our Buyers!.
Solid Valve Spring Compressor Kit To Effortlessly Reset Your Valve Springs. The Orion Kit Comes Fully Stocked With 5 Collets To Fit Hundreds Of Makes And Models, Such As Motorcycles, Atvs, Cars, And Other Small Engines..
Valve Spring Compressor Small Engine, This Toolset Is Used To Easily And Safely Compress Valve Springs For Removal Or Installation.The Forged Steel Construction Of This Set Provides Superior Strength And Hardness. The C-Clamp Will Not Bend Or Twist Under The Stress Of Compressing Valve Springs. The Oxide Finish On The Set Components Resists Rust And Corrosion. The Surface Finish Of Each Part Is Smooth And Provides For Easy Use Under High Compression..
Features
- Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment; All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings
- Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression.
- Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor C Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case
- Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motorcycles, ATVs, cars, and other small engines.
- Valve Spring Compressor Set included:(5) Metric collets 16mm, 19mm, 23mm, 25mm, 30mm, (3) extension screws, (1) spring compressor U-clamp with a maximum jaw opening of 9.5 inches, (1) compression bar, and (1) storage case for your convenience The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!
- See more on Amazon...
Brand: Lucky Seven | Manufacturer: SCK000100 Lucky Seven
Dimensions: 0.40 x 3.00 x 2.00 Inches
See On Amazon #22
CNSPEED Ls Valve Spring Installation Tool Aluminum Valve Spring Compressor Tool for LS2 LS1 Style Valve Spring Installation (Red)
Asin: B09PCY27P6 | Ean: 0744581136337 | UPC: 744581136337
Simple Operation: The Installation Tool Is Easy To Remove And Install The Valve Spring. Just Replace The Rocker With A Screw, Insert The Square Screwdriver Or Socket Wrench Of The Standard Switch Lever Into The Left Or Right Side Of The Tool, And Then Pry The Compression Spring Down..
After Sales: If You Have Any Questions During The Shopping Or Installation Process, You Can Contact Us Any Time..
Professional Design: The Design Of The Valve Spring Pressing Tool Is Simple And Generous, And The Exquisite Workmanship Will Not Affect The Performance Of The Whole Vehicle. It Is Easy To Install With A Wrench. The Direct Installation Of The Replacement Device Ensures The Performance Of The Car To A Certain Extent..
Material: The Valve Spring Compression Tool Is Made Of Aluminum Alloy To Enhance Its Oxidation Resistance, Rust Resistance And Corrosion Resistance. The Service Life Is Long And The Replacement Cost Is Reduced. Professional Manufacturing, High Performance. Make Your Vehicle Work More Efficiently..
Features
- Fitment: This LS1/LS2 valve compressor tool kit works for both the intake and exhaust valves of La Cathedral port cylinder heads.
- Material: The valve spring compression tool is made of aluminum alloy to enhance its oxidation resistance, rust resistance and corrosion resistance. The service life is long and the replacement cost is reduced. Professional manufacturing, high performance. Make your vehicle work more efficiently.
- Simple operation: The installation tool is easy to remove and install the valve spring. Just replace the rocker with a screw, insert the square screwdriver or socket wrench of the standard switch lever into the left or right side of the tool, and then pry the compression spring down.
- Professional design: The design of the valve spring pressing tool is simple and generous, and the exquisite workmanship will not affect the performance of the whole vehicle. It is easy to install with a wrench. The direct installation of the replacement device ensures the performance of the car to a certain extent.
- After sales: If you have any questions during the shopping or installation process, you can contact us any time.
- See more on Amazon...
Brand: CNSPEED | Manufacturer: PLAY Auto Parts
Dimensions: 2.36 x 3.15 x 3.15 Inches
See On Amazon #23
Rocker Arm Remover Installer & Valve Spring Compressor Tool for Chrysler, Dodge, Jeep 3.7L & 4.7L Engines 3747-123 10102 8426 8387 8516A
Asin: B087M126W6 | Model: YS-THYB | PartNumber: YS-THYB | Ean: 7427046761659
【Advantage】: A Specialty And Must Have Tool, Which To Remove And Install Rocker Arms Safely Without Damage To The Camshaft Or Camshaft Lobes. The Valve Spring Tool Allows Access At The Valve Keeper So A Magnet Can Be Used To Remove It..
【Support】: Our Focus On Products And Customer Services Is 2Nd To None. We Provide Friendly 1 Years’ Warranty Support, Easy-To-Reach Customer Service And 100% Satisfaction Guarantee To Make Sure Your Investment!.
【Materior】: The Valve Spring Tool Constructed From Superior Heat-Treatedsteel And Proprietary Hardened For Maximum Durability And Excellent Solid, No Deformation. Black Oxide Finish To Resist Rust And Corrosion For Maximum Strength And Longevity..
【Function】: This Special Rocker Arm Remover Used To Allow Removal Of The Camshaft, Rocker Arms And Hydraulic Lash Adjusters In 3.7 And 4.7 Liter Engines. Also Can Be Used To Change Broken Valve Springs Or Just To Install Replacement Rockers Or Lifters..
Features
- FITMENT : The Valve Spring Compressor and a Rocker Arm Tool fit for 1999~2013 Jeep, Dodge, Chrysler 3.7 and 4.7 engines. Alternative to Mopar Miller 10102-8426, 8387 and 8516A.
- FUNCTION : This special rocker arm remover used to allow removal of the camshaft, rocker arms and hydraulic lash adjusters in 3.7 and 4.7 Liter Engines. Also can be used to change broken valve springs or just to install replacement rockers or lifters.
- ADVANTAGE : A specialty and must have tool, which to remove and install rocker arms safely without damage to the camshaft or camshaft lobes. The valve spring tool allows access at the valve keeper so a magnet can be used to remove it.
- MATERIOR : The valve spring tool constructed from superior heat-treatedsteel and proprietary hardened for maximum durability and excellent solid, no deformation. Black oxide finish to resist rust and corrosion for maximum strength and longevity.
- SUPPORT : Our focus on products and customer services is 2nd to none. We provide friendly 1 years warranty support, easy-to-reach Customer Service and 100% satisfaction guarantee to make sure your investment!
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
Warranty: 12 months
See On Amazon #24
Buachois Valve Spring Compressor Tool, High Strength Air Valve Holder Pressure Pipe, Heavy Duty Air Valve Holding Tool for LS1 LS2 LS3 LS6
Asin: B0D2KWR2Q6
Efficient: The Tool Is Used When Installing Valve Springs While The Cylinder Head Is Mounted On The Engine. The Tool Allows The Combustion Cylinder To Be Filled With Compressed Air, Keeping The Valves Closed While The Valve Springs Are Replaced. The Tool Not Only Compresses The Valve Springs Efficiently, But Also Helps With Valve Retention And Pressure Tube Installation..
Easy To Use: The Valve Spring Compression Tool Is Designed To Be Easy To Use. The Ls Valve Spring Compression Tool Requires No Complicated Maneuvers And Is Suitable For Professional Auto Mechanics And Diy Enthusiasts. Make Your Engine Maintenance Easier With This Reliable Tool..
Accurate Results: This Valve Spring Compression Tool Maintains The Structural Integrity Of The Valve Spring During Compression, Allowing For Accurate And Safe Component Installation..
Application: Valve Spring Compression Tool And Valve Stanchion Pressure Tube Kit For Ls1 Ls2 Ls3 Ls6 Engines. The Engine Valve Spring Compression Tool Is Designed For Efficient And Easy Removal And Installation Of Valve Springs In Engines..
Features
- HIGH STRENGTH: The tool kit is made of durable metal and rubber to ensure long-lasting performance and reliability, ensuring it can withstand heavy use over time. Its heavy-duty construction ensures durability and long-term use.
- APPLICATION: Valve spring compression tool and valve stanchion pressure tube kit for LS1 LS2 LS3 LS6 engines. The engine valve spring compression tool is designed for efficient and easy removal and installation of valve springs in engines.
- EFFICIENT: The tool is used when installing valve springs while the cylinder head is mounted on the engine. The tool allows the combustion cylinder to be filled with compressed air, keeping the valves closed while the valve springs are replaced. The tool not only compresses the valve springs efficiently, but also helps with valve retention and pressure tube installation.
- ACCURATE RESULTS: This valve spring compression tool maintains the structural integrity of the valve spring during compression, allowing for accurate and safe component installation.
- EASY TO USE: The valve spring compression tool is designed to be easy to use. The LS Valve Spring Compression Tool requires no complicated maneuvers and is suitable for professional auto mechanics and DIY enthusiasts. Make your engine maintenance easier with this reliable tool.
- See more on Amazon...
Brand: Buachois | Manufacturer: Buachois
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.23 Pounds
See On Amazon #25
Leapiture Cylinder Head Valve Spring Compressor Stem Seal Replacement Tool Valve Removal Installer Tool Stable for OHV OHC Engines
Asin: B0D2L1HDDB | Model: Leapitureyeprvn946b | PartNumber: Leapitureyeprvn946b
Adjustable Design For Versatility: Featuring An Adjustable Handle, Claws, And Hooks, This Tool Allows For Versatile Use On Most Ohv Engines, Providing Flexibility And Adaptability To Different Engine Configurations..
Adjustable Spring Depth Reach: Valve Removal Installer Tool's Spring Depth Reach Grips To Retainer Are Adjustable, Catering To Most Large And Small Spring Applications And Ensuring A Secure Grip During Valve Spring Compression Tasks..
Performance: With Its Good Design And Construction, Cylinder Head Valve Spring Compressor Offers Ease Of Use And Reliability, Making It Suitable For Professional Mechanics And Diy Enthusiasts Alike..
Cylinder Head Maintenance Without Removal: Valve Spring Compressor Tool Is Suitable For Replacing Valve Springs And Valve Stem Oil Seals Without Need To Remove Cylinder Head, Providing Convenience And Efficiency In Engine Maintenance Tasks..
Features
- COMPATIBLE: Designed for use in conjunction with Model No.VS1601 compressed air adaptor, ensuring compatibility and facilitating easy operation with compressed air systems.
- CYLINDER HEAD MAINTENANCE WITHOUT REMOVAL: Valve spring compressor tool is suitable for replacing valve springs and valve stem oil seals without need to remove cylinder head, providing convenience and efficiency in engine maintenance tasks.
- ADJUSTABLE DESIGN FOR VERSATILITY: Featuring an adjustable handle, claws, and hooks, this tool allows for versatile use on most OHV engines, providing flexibility and adaptability to different engine configurations.
- PERFORMANCE: With its good design and construction, cylinder head valve spring compressor offers ease of use and reliability, making it suitable for professional mechanics and DIY enthusiasts alike.
- ADJUSTABLE SPRING DEPTH REACH: Valve removal installer tool's spring depth reach grips to retainer are adjustable, catering to most large and small spring applications and ensuring a secure grip during valve spring compression tasks.
- See more on Amazon...
Brand: Leapiture | Manufacturer: Leapiture
See On Amazon #26
CheriMuMu Valve Stem Seal Special Removal Tool, Valve Seal Puller Removal Tool, Valve Shaft Seal Removal Extractor Tool Replace, Compatible with 3-Cylinder EFI Engine 4-Cylinder EFI Engine
Asin: B0D2J7RYR3 | Model: A1 | PartNumber: A1
【Precise Repair】Valve Stem Seal Special Removal Tool Is Made According To The Parameters Of Thevolkswagen, Andaudi, So It Can Fit Well With The Car Parts For A Precise Repair..
【Save Money】With This Valve Stem Seal Special Removal Tool, You Can Complete The Disassembly Of The Valve Stem Seal Yourself At Home Without Having To Go To A Repair Shop, Saving You Money..
【Easy To Carry And Store】With Its Lightweight (Gross Weight: 2.87 Lbs) And Compact Size (Total Length: 15In), You Can Easily Take The Valve Stem Seal Special Removal Tool To Any Workplace Or Store It In Your Toolbox Or Car Trunk Without Taking Up Too Much Space..
【Highly Functional】This Powerful Tool Can Help You Pull Out The Valve Stem Seal Easily And Quickly, Allowing You To Conveniently Change A New Valve Stem Seal To Ensure The Normal Operation Of The Car..
Features
- Strong and Durable Valve stem seal special removal tool is made of high-quality 45# caron steel with a heat treatment that can resist wear, shock, and deformation, ensuring a long service life.
- Highly Functional This powerful tool can help you pull out the valve stem seal easily and quickly, allowing you to conveniently change a new valve stem seal to ensure the normal operation of the car.
- Precise Repair Valve stem seal special removal tool is made according to the parameters of theVolkswagen, andAudi, so it can fit well with the car parts for a precise repair.
- Easy to Carry and Store With its lightweight (gross weight: 2.87 lbs) and compact size (total length: 15in), you can easily take the valve stem seal special removal tool to any workplace or store it in your toolbox or car trunk without taking up too much space.
- Save Money With this valve stem seal special removal tool, you can complete the disassembly of the valve stem seal yourself at home without having to go to a repair shop, saving you money.
- See more on Amazon...
Brand: CheriMuMu | Manufacturer: CHERIMUMU
Warranty: 90 Day
See On Amazon #27
Aupitolt Valve Stem Seal Special Removal Tool Compatible withVW Audi 3-Cylinder EFI Engine 4-Cylinder EFI Engine, Valve Seal Puller Removal Tool, Valve Shaft Seal Removal Extractor Tool Replace
Asin: B0D2J7BDJK | Model: A1 | PartNumber: A1
【Highly Functional】This Powerful Tool Can Help You Pull Out The Valve Stem Seal Easily And Quickly, Allowing You To Conveniently Change A New Valve Stem Seal To Ensure The Normal Operation Of The Car..
【Easy To Carry And Store】With Its Lightweight (Gross Weight: 2.87 Lbs) And Compact Size (Total Length: 15In), You Can Easily Take The Valve Stem Seal Special Removal Tool To Any Workplace Or Store It In Your Toolbox Or Car Trunk Without Taking Up Too Much Space..
【Precise Repair】Valve Stem Seal Special Removal Tool Is Made According To The Parameters Of Thevw, And Audi, So It Can Fit Well With The Car Parts For A Precise Repair..
【Save Money】With This Valve Stem Seal Special Removal Tool, You Can Complete The Disassembly Of The Valve Stem Seal Yourself At Home Without Having To Go To A Repair Shop, Saving You Money..
Features
- Strong and Durable Valve stem seal special removal tool is made of high-quality 45# caron steel with a heat treatment that can resist wear, shock, and deformation, ensuring a long service life.
- Save Money With this valve stem seal special removal tool, you can complete the disassembly of the valve stem seal yourself at home without having to go to a repair shop, saving you money.
- Highly Functional This powerful tool can help you pull out the valve stem seal easily and quickly, allowing you to conveniently change a new valve stem seal to ensure the normal operation of the car.
- Precise Repair Valve stem seal special removal tool is made according to the parameters of theVW, and Audi, so it can fit well with the car parts for a precise repair.
- Easy to Carry and Store With its lightweight (gross weight: 2.87 lbs) and compact size (total length: 15in), you can easily take the valve stem seal special removal tool to any workplace or store it in your toolbox or car trunk without taking up too much space.
- See more on Amazon...
Brand: Aupitolt | Manufacturer: Aupitolt
Warranty: 90 Day
See On Amazon #28
Leapiture Valve Spring Compressor Spring Replacement Tool Valve Assembly Tool Automotive Conversion Spring Installation Tool Fits Ls1 Ls2 (Blue)
Asin: B0D2DNBH4Z | Model: Leapituretrgmfczs39-11 | PartNumber: Leapituretrgmfczs39-11
Reduced Stress On The Casting: Installation Tool Not Only Simplifies The Spring Installation Process, But Also Reduces The Stress On The Casting. This Ensures The Performance And Longevity Of Your Engine Components And Makes Your Operation Easy..
Installation: Springs Are Designed For Easy Installation And Can Be Quickly Installed With Just A Wrench. Enjoy The Convenience Of A Straightforward Installation Process Without The Need For Specialized Tools Or Equipment..
Easy Operation: With The Valve Spring Compressor Tool, You Will Experience Easy Operation. Simply The Tool In Place, Insert The Square Driver Of A Standard Switch Lever Or Socket Wrench Into The Designated Slot, And Effortlessly Compress The Spring..
Time-Saving Tool: Removing And Installing Valve Springs Is A Breeze With Our Valve Spring Compression Tool, Dramatically Reducing Time And Labor. Say Goodbye To Cumbersome, Labor-Intensive Processes And Easily Simplify Valve Spring Maintenance Tasks..
Features
- VERSATILE COMPATIBILITY: Spring Compressor Tool Kit is specifically designed for use with the intake and valves of LS1/LS2 engine ported cylinder heads to ensure fit and compatibility. Experience integration with engine components for efficient operation.
- TIME-SAVING TOOL: Removing and installing valve springs is a breeze with our valve spring compression tool, dramatically reducing time and labor. Say goodbye to cumbersome, labor-intensive processes and easily simplify valve spring maintenance tasks.
- REDUCED STRESS ON THE CASTING: Installation tool not only simplifies the spring installation process, but also reduces the stress on the casting. This ensures the performance and longevity of your engine components and makes your operation easy.
- EASY OPERATION: With the Valve Spring Compressor Tool, you will experience easy operation. Simply the tool in place, insert the square driver of a standard switch lever or socket wrench into the designated slot, and effortlessly compress the spring.
- INSTALLATION: Springs are designed for easy installation and can be quickly installed with just a wrench. Enjoy the convenience of a straightforward installation process without the need for specialized tools or equipment.
- See more on Amazon...
Brand: Leapiture | Manufacturer: Leapiture
See On Amazon #29
Valve Spring Compressor Valve Spring Seal Retainer Valve Spring Tool
Asin: B0D2FF22R5
【Accurate Adjustment】: Valve Spring Seal Retainer Is Opening Can Be Adjusted To Ensure A Tight Fit On Your Camshaft..
【Easy To Use】: Valve Spring Removal Tool Is Designed To Be Easily Used With 3/8 Inch Breaker Bars Or Ratchet Service Camshafts, Valve Seals, Valve Spring And Retainers, And Can Be Used With The Engine Removed Or Installed, With The Cylinder Head Open Or Closed..
【Valve Spring Compressor Tool】: No Need To Remove The Cylinder Head To Compress The Valves; The Arm Compressor Allows For Quick And Easy Removal And Replacement Of Valve Spring, Roller Followers, Rocker Arms And Lash Adjusters..
【Premium Material】: Valve Compressor Tool Is Made Of Quality Carbon Steel, Which Is Strong And Can Be Used For A Long Time..
Features
- Applicable : Valve spring compressor is for 2 Valve 4.6L 5.4L V8, 6.8L V10, not compatible any other 3V or 4V engines.
- Premium Material : Valve compressor tool is made of quality carbon steel, which is strong and can be used for a long time.
- Accurate Adjustment : Valve spring seal retainer is opening can be adjusted to ensure a tight fit on your camshaft.
- Valve Spring Compressor Tool : No need to remove the cylinder head to compress the valves; the arm compressor allows for quick and easy removal and replacement of valve spring, roller followers, rocker arms and lash adjusters.
- Easy To Use : Valve spring removal tool is designed to be easily used with 3/8 inch breaker bars or ratchet service camshafts, valve seals, valve spring and retainers, and can be used with the engine removed or installed, with the cylinder head open or closed.
- See more on Amazon...
Brand: MERIGLARE | Manufacturer: Generic
Weight: 0.44 Pounds
See On Amazon #30
DPTOOL Valve Pressure Spring Installer/Remover Tool Plier for BMW Mini N12 N14 N16 N18 Engine Timing Tool and for Peugeot Citroen 1.6T
Asin: B082DZRC7Z | Model: HT2001 | PartNumber: HT2001 | Ean: 0053742463060 | UPC: 053742463060
Accurate : Our Valve Pressure Spring Remover And Installer Have Undergone Rigorous Engine Testing, To Ensure That The Timing Tool Can Be Perfectly Adapted To The Engine.
Quality Guarante: Our Camshaft Timing Tool Made Of High Quality Steel, High Hardness, Not Easy To Break, The Exterior Is Coated With Black Antioxidant Layer, Extended Service Life. And We Offer Lifetime Warranty, Let You Order Without Worry.
More Convenience : This Kit Include Valve Pressure Spring Remover/ Installer , And Valve Slider Holding Pliers, Three Tools Put In A Suitcase, The Case Design Easy To Store And Carry.
Function: Specially Designed To Remove And Install The Pressure Spring On Intermediate Lever. And The Valve Slider Holding Pliers Could Easy To Install The Valve Slider.
Features
- Applicable Engine: Compatible with BMW MINI N12, N16, N18; for Peugeot 207, 308, EP6 Engine. Replace BM number119571 119572 119573
- Function: Specially designed to remove and install the pressure spring on intermediate lever. and the valve slider holding pliers could easy to install the valve slider
- Accurate : Our valve pressure spring remover and installer have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine
- More Convenience : This kit include valve pressure spring remover/ installer , and valve slider holding pliers, three tools put in a suitcase, the case design easy to store and carry
- Quality Guarante: Our camshaft timing tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. and we offer lifetime warranty, let you order without worry
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.94 x 11.81 x 10.63 inches
See On Amazon
Looking For Something Else?
Search