Best square washers - Buying Guide
Last Updated: 04/25/2024
Share on
Bestselling square washers on Amazon
- 50 Pcs Heavy Duty Galvanized Squares Washer Plate Fastener Hardware 1/2(ID) X 2 X 2 (Square OD) X 3/...
- 6 Pcs Square Washers Plate, "(ID) x3"x3" Heavy Duty Square Bearing Plates, Fastener Square Strut Ch...
- U-Turn - 3/8 Square Beveled Washer Malleable Iron Galvanized (10 Pack)
- Squares Washer Galvanized Heavy Duty Plate Fastener Square Plate Washers, 1/2 X 2 X 2 X 3/16 inch, 5...
- 20 Pcs Square Washers Plate 5/8"(ID) x1-5/8"x1-5/8", Hot Galvanized Steel Thickness 2.8mm Bearing Pl...
- 10 Pack Square Plate Washers 5/8"(ID) x2"x2", Flat Bearing Plate Washers, Fit for 5/8" Bolt, Thickne...
- 10 Pcs Square Plate Washers "(ID) x3"x3"x ", Hot-Dipped Galvanized Steel Thickness 2.8mm Bearing Fl...
- 50 Pcs 3/8"(ID) x1-1/8"x1-1/8" Square Plate Washer for 3/8" Bolt, Galvanized Steel Bearing Plate Squ...
- 8 PCS 1/2"x2-3/8"x2-3/8" Heavy Duty Square Plate Washer Plain, Fit for 1/2"Bolt, 4.8mm Thicknes Flat...
- ZANURA 3 " x 3 " Square Bearing Plate Washers Fit for 3/4" Bolt, 12 Pack
#1
50 Pcs Heavy Duty Galvanized Squares Washer Plate Fastener Hardware 1/2(ID) X 2 X 2 (Square OD) X 3/16 (THK) inch
Asin: B08ZSZJN21 | Model: Galvanized Squares Washer-50PCS | PartNumber: Galvanized Squares Washer-50PCS | Ean: 8424510685755
【Cushioning, Shock Absorption And Anti-Loosening】Reduce The Impact Of Equipment Vibration On The Nut, Play A Good Buffering Effect To Prevent The Nut From Loosening.
【Widely Use】Square Washers Can Be Used In Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, Their Applications Can Be Seen In Many Areas.
【Thickness Thickening】0.18 Inch Thickness, It Is Hard And Thick Enough, Which Not Easy To Deform During Installation And Prolong Service Life.
【Strong Protection】 The Gasket Enlarges The Contact Surface Between The Nut And The Connected Piece And Disperse Pressure Of Nuts, Which Protects The Surface Of The Connecting Piece From Damage.
Features
- High cost-effective The square washer is made of carbon steel and is protected by a galvanized coating, which is high cost effective and good corrosion resistance
- Strong protection The gasket enlarges the contact surface between the nut and the connected piece and disperse pressure of nuts, which protects the surface of the connecting piece from damage
- Cushioning, shock absorption and anti-loosening Reduce the impact of equipment vibration on the nut, play a good buffering effect to prevent the nut from loosening
- Thickness thickening 0.18 Inch thickness, it is hard and thick enough, which not easy to deform during installation and prolong service life
- Widely use Square washers can be used in construction sites, machinery and industrial equipment and other related scenes, their applications can be seen in many areas
- See more on Amazon...
Brand: LeaGerous | Manufacturer: LeaGerous
See On Amazon #2
6 Pcs Square Washers Plate, "(ID) x3"x3" Heavy Duty Square Bearing Plates, Fastener Square Strut Channel Washer Plate, Thickness 2.8mm, Q235 Iron
Asin: B0CDB8GNWV
Multi-Scenario Application: Used In The Application In Mechanical Equipment And Industrial Equipment, Light Steel Frame Housing Accessories, Construction Sites, Timber Building, Concrete Floor Applications And Other Related Fields..
Satisfactory Customer Service: We Are Committed To Providing You With A Satisfactory Shopping Experience. If You Encounter Any Problems Or Have Any Suggestions, Please Contact Us In Time, And We Will Provide You With A Satisfactory Solution..
Dimensional Information: Dimensions: 75X75mm/3X3 Inch, Thickness: 2.8Mm, Hole Diameter 16.8Mm/⅝", For Greater Load Distribution And Bolting Through Walls Or Timber..
Main Function: Construction Square Plate Washers Can Be Used With All Fasteners For Greater Load Distribution. Square Washers Can Protect The Nut Well And Prevent The Nut From Loosening. It Is An Ideal Buffer Hardware..
Features
- Exquisite Material: Our square washers are made of high-quality Q235 iron material, with smooth edges and surfaces without burrs, wear-resistant, corrosion-resistant, high hardness, not easy to break or deform, and durable.
- Main Function: Construction square plate washers can be used with all fasteners for greater load distribution. Square washers can protect the nut well and prevent the nut from loosening. It is an ideal buffer hardware.
- Multi-scenario Application: Used in the application in mechanical equipment and industrial equipment, light steel frame housing accessories, construction sites, timber building, concrete floor applications and other related fields.
- Dimensional Information: Dimensions: 75x75mm/3x3 inch, Thickness: 2.8mm, hole diameter 16.8mm/ , for greater load distribution and bolting through walls or timber.
- Satisfactory Customer Service: We are committed to providing you with a satisfactory shopping experience. If you encounter any problems or have any suggestions, please contact us in time, and we will provide you with a satisfactory solution.
- See more on Amazon...
Brand: Xingwenhao | Manufacturer: Xingwenhao
See On Amazon #3
U-Turn - 3/8 Square Beveled Washer Malleable Iron Galvanized (10 Pack)
Asin: B07Y4RRFQ5 | Ean: 0787303285852 | UPC: 787303285852
✔ 𝐄𝐱𝐭𝐞𝐫𝐢𝐨𝐫 𝐅𝐢𝐧𝐢𝐬𝐡: Enhance The Lifespan Of Your Square Beveled Washer With Its Galvanized Exterior Finish..
✔ 𝐂𝐮𝐬𝐭𝐨𝐦𝐞𝐫 𝐒𝐚𝐭𝐢𝐬𝐟𝐚𝐜𝐭𝐢𝐨𝐧: We Stand By The Quality, Durability, And Performance Of Our Square Beveled Washer. If You Have Any Questions Or Need Assistance, Our Friendly Customer Support Team Is Here For You..
✔ 𝐒𝐢𝐳𝐞: Tailor Your Projects With Precision Using The (037Mihg) 3/8 Galvanized Malleable Iron Square Beveled Washer..
✔ 𝐖𝐚𝐬𝐡𝐞𝐫 𝐓𝐲𝐩𝐞: The Square Beveled Washer Or Wedge Washers Are Helpful For Providing Precision In Every Fastening Application..
Features
- : Crafted from robust malleable iron, our Square Beveled Washer ensures unparalleled durability and longevity.
- : The Square Beveled Washer or wedge washers are helpful for providing precision in every fastening application.
- : Enhance the lifespan of your Square Beveled Washer with its galvanized exterior finish.
- : Tailor your projects with precision using the (037MIHG) 3/8 Galvanized Malleable Iron Square Beveled Washer.
- : We stand by the quality, durability, and performance of our Square Beveled Washer. If you have any questions or need assistance, our friendly customer support team is here for you.
- See more on Amazon...
Brand: U-Turn Fasteners, Inc. | Manufacturer: U-Turn Approved Manufacturer
See On Amazon #4
Squares Washer Galvanized Heavy Duty Plate Fastener Square Plate Washers, 1/2 X 2 X 2 X 3/16 inch, 50 Packs
Asin: B09MCVFQPN | Model: SWF-098 | PartNumber: SWF-098 | Ean: 0670494604147 | UPC: 670494604147
Mostly Used In Mechanical Equipment, It Is Very Good To Protect The Nut And Prevent The Nut From Loosening..
Reliable Service: As We Are So Strict With Our Quality, We Have Confidence. So We Would Refund 2 Times Price If You Receive Defective Product..
Widely Used In Machinery And Industrial Equipment, Square Plate Washers Can Protect The Nut Well, Is An Ideal Buffer Hardware..
Square Washer Is Made Of High-Quality Materials, High Hardness, Anti-Corrosion And Anti-Rust, Smooth Surface Without Burrs..
Features
- 4.7mm/0.18inch thickness, thick enough so that the quares Washer will not be deformed, durable and has a long service life.
- Square washer is made of high-quality materials, high hardness, anti-corrosion and anti-rust, smooth surface without burrs.
- Mostly used in mechanical equipment, it is very good to protect the nut and prevent the nut from loosening.
- Widely used in machinery and industrial equipment, square plate washers can protect the nut well, is an ideal buffer hardware.
- Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product.
- See more on Amazon...
Brand: GYHCHJDZ | Manufacturer: GYHCHJDZ
See On Amazon #5
20 Pcs Square Washers Plate 5/8"(ID) x1-5/8"x1-5/8", Hot Galvanized Steel Thickness 2.8mm Bearing Plate Square Washer for Cold Formed Steel Light Gauge Steel Framing
Asin: B09G2J3T1R | Model: DP02-T20 | PartNumber: DP02-T20
Hole Diameter : Φ16.8Mm For 5/8 Bolt..
Square Washers Plate Used In Light Steel Frame Housing Fittings, Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, And Their Applications In Many Areas.
Length: 1⅝ Inches (40 Mm), Width: 1⅝ Inches (40 Mm) ,Thickness: 2.8Mm.
Features
- 20 Pcs Square Washers Plate, Material: Carbon steel Q345 , surface hot-dip galvanized (good impact resistance, wear resistance, corrosion resistance).
- Length: 1 inches (40 mm), Width: 1 inches (40 mm) ,Thickness: 2.8mm
- Hole Diameter : 16.8mm for 5/8 bolt.
- Square Washers Plate used in light steel frame housing fittings, construction sites, machinery and industrial equipment and other related scenes, and their applications in many areas
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.11 x 1.57 x 1.57 inches
See On Amazon #6
10 Pack Square Plate Washers 5/8"(ID) x2"x2", Flat Bearing Plate Washers, Fit for 5/8" Bolt, Thickness 5.4mm Carbon Steel
Asin: B09FPSNFTF | Model: DP03-T10 | PartNumber: DP03-T10
Hole Diameter: Φ17.8Mm (5/8 Inches), Apply For 5/8" Bolt..
Thickness: 5.4Mm, 2"X2" Squares Washer Plate Fastener Hardware..
Features
- Square Strut Channel Washer carbon steel Q235B material,electrogalvanized.
- Thickness: 5.4mm, 2x2 Squares Washer Plate Fastener Hardware.
- Hole Diameter: 17.8mm (5/8 inches), Apply for 5/8 Bolt.
- See more on Amazon...
Brand: heneng | Manufacturer: heneng
Dimensions: 0.21 x 1.97 x 1.97 Inches
See On Amazon #7
10 Pcs Square Plate Washers "(ID) x3"x3"x ", Hot-Dipped Galvanized Steel Thickness 2.8mm Bearing Flat Square Washer
Asin: B09G2FJ9WQ | Model: DP01-T10 | PartNumber: DP01-T10
Hole Diameter : Φ16.8Mm For 5/8 Bolt..
Square Washers Plate Used In Light Steel Frame Housing Fittings, Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, And Their Applications In Many Areas.
Length: 3"(75 Mm), Width: 3"(75 Mm) ,Thickness: 2.8Mm.
Features
- 10 Pcs Square Washers Plate, Material: Carbon steel Q345 , surface hot-dip galvanized (good impact resistance, wear resistance, corrosion resistance).
- Length: 3(75 mm), Width: 3(75 mm) ,Thickness: 2.8mm
- Hole Diameter : 16.8mm for 5/8 bolt.
- Square Washers Plate used in light steel frame housing fittings, construction sites, machinery and industrial equipment and other related scenes, and their applications in many areas
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.11 x 2.95 x 2.95 Inches | Weight: 0.28 pounds
See On Amazon #8
50 Pcs 3/8"(ID) x1-1/8"x1-1/8" Square Plate Washer for 3/8" Bolt, Galvanized Steel Bearing Plate Square Flat Washers Fastener, Thickness 3mm
Asin: B0CPSTD91Y | Model: DP18-T50 | PartNumber: DP18-T50
Prepunched Hole Size(1Pcs): Φ12.7Mm , Fit For Or 3/8" Or 7/16" Bolt.
Square Washers Can Be Used In Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, Their Applications Can Be Seen In Many Areas..
Length: 1-1/8" (30Mm), Width: 1-1/8" (30Mm), Thickness: 3Mm.
Features
- 50 Pcs Square Washers Plate, Material: Carbon steel Q235B , Surface electrogalvanized
- Length: 1-1/8 (30mm), Width: 1-1/8 (30mm), Thickness: 3mm
- Prepunched hole size(1pcs): 12.7mm , Fit for or 3/8 or 7/16 Bolt
- Square washers can be used in construction sites, machinery and industrial equipment and other related scenes, their applications can be seen in many areas.
- See more on Amazon...
Brand: Fanmao | Manufacturer: Fanmao
Dimensions: 0.12 x 1.18 x 1.18 Inches
See On Amazon #9
8 PCS 1/2"x2-3/8"x2-3/8" Heavy Duty Square Plate Washer Plain, Fit for 1/2"Bolt, 4.8mm Thicknes Flat Bearing Plate
Asin: B0B573RRW2 | Model: ZX37-T8 | PartNumber: ZX37-T8 | Ean: 0762983849235 | UPC: 762983849235
Hole Size: Φ15mm (Fit For 1/2" Bolt).
Weight:127G(1 Pcs), 1040G(8 Pcs).
Size: 60X60mm (2⅜"X2⅜"), Thickness: 4.8Mm.
Features
- Material: carbon steel Q235B, Finish: Plain
- Size: 60x60mm (2 x2 ), Thickness: 4.8mm
- Hole size: 15mm (Fit for 1/2 Bolt)
- Weight:127g(1 pcs), 1040g(8 pcs)
- See more on Amazon...
Brand: Fanmao | Manufacturer: Fanmao
See On Amazon #10
ZANURA 3 " x 3 " Square Bearing Plate Washers Fit for 3/4" Bolt, 12 Pack
Asin: B0CT2GWSTS
【Installation】The Holes (Diameter: 0.85"/22Mm) Of The Plate Washers Are Fit For Many Strut Channels, Just Make Sure The Hole Size And Install It Easily In Seconds..
【Warranty】12 X Square Bearing Plate Washers & One-Year Warranty Included. If You Have Any Questions, Please Contact Us Via Amazon Message Directly, Our Professional Customer Service Would Help In 24H..
【High Quality】Made Of Selected Carbon Steel With Galvanized Coat, Which Is Tough And Durable To Prevent From Dust And Corrosion..
【Specification】The Bearing Plate Has A Slotted Hole Measuring 0.85" (22Mm), Compatible With All 3/4" Bolts. The Plate Measures 3.13" X3.13" And The Thickness Is 0.22"..
Features
- Function Square bearing plate is typically used in foundation anchor bolts instead of cut washers. It give greater bearing surface which is designed to help strengthen and distribute the load at critical connections.
- Specification The bearing plate has a slotted hole measuring 0.85 (22mm), compatible with all 3/4 bolts. The plate measures 3.13 x3.13 and the thickness is 0.22.
- Installation The holes (Diameter: 0.85/22mm) of the plate washers are fit for many strut channels, just make sure the hole size and install it easily in seconds.
- High Quality Made of selected carbon steel with galvanized coat, which is tough and durable to prevent from dust and corrosion.
- Warranty 12 X square bearing plate washers & one-year warranty included. If you have any questions, please contact us via Amazon Message directly, our professional customer service would help in 24H.
- See more on Amazon...
Brand: ZANURA | Manufacturer: ZANURA
See On Amazon #11
10 PCS 4 Inches Square Plate Washer, Square Strut Channel Flat Washer for 5/8" Bolt, Low Carbon Steel Washer Bearing Plate, Thickness 1/8", "(ID) x3-3/4"x3-3/4"
Asin: B0CPY8RGLZ
Prepunched Hole Size(1Pcs): Φ16.7Mm(5/8 Inches).
Square Washers Plate Used To Construction Sites, Light Steel Frame Housing Fittings, Machinery And Industrial Equipment And Other Related Scenes.
Good Corrosion Resistance, Good Ductility.
Length: 3-3/4"(95 Mm), Width: 3-3/4"(95 Mm) ,Thickness: 1/8"(3.2Mm).
Features
- Material: carbon steel Q235B,electrogalvanized
- Length: 3-3/4(95 mm), Width: 3-3/4(95 mm) ,Thickness: 1/8(3.2mm)
- Prepunched hole size(1pcs): 16.7mm(5/8 inches)
- Good corrosion resistance, good ductility
- Square Washers Plate used to construction sites, light steel frame housing fittings, machinery and industrial equipment and other related scenes
- See more on Amazon...
Brand: YIDU69Q | Manufacturer: YIDU69Q
Dimensions: 0.13 x 3.74 x 3.74 Inches
See On Amazon #12
20 Pcs 3/8"-16 Square Channel Washer with Tapped Hole, Flat Plate Fitting for 1-5/8" Strut Channels, Carbon Steel Electrogalvanized, 5.6mm Thickness
Asin: B0BS3Y6GDQ | Model: ZX108-T20 | PartNumber: ZX108-T20 | Ean: 0762983849846 | UPC: 762983849846
Size: 1-3/8 X 1-1/2 Inch (35X38mm), Thickness: 5.7Mm,Hole Diameter: 3/8"-16.
The Square Washer With Threaded Hole Is Used With 1-5/8" Metal Framing Channel. Very Robust And Durable, Perfect For Indoor And Outdoor Use.
Package List: 20X Square Channel Washer.
Material: Carbon Steel Q235b, Surface Treatment: Electrogalvanized.
Features
- Strut flat plate fitting for 1-5/8" wide strut channel. Mounting hole diameter is 3/8".
- Material: carbon steel Q235B, Surface treatment: electrogalvanized
- Size: 1-3/8 x 1-1/2 inch (35x38mm), Thickness: 5.7mm,Hole diameter: 3/8-16
- Package list: 20x Square Channel Washer
- The Square Washer with threaded hole is used with 1-5/8 Metal Framing Channel. Very robust and durable, Perfect for indoor and outdoor use
- See more on Amazon...
Brand: Fanmao | Manufacturer: Fanmao
Dimensions: 0.22 x 1.50 x 1.38 Inches | Weight: 2.51 pounds
See On Amazon #13
6 Pack 3 " x 3 " Square Bearing Plate Washers, Carbon Steel Galvanized, Thickness 5.6mm, Fit for 3/4" Bolt
Asin: B092S18SNF | Model: CF2901T6 | PartNumber: CF2901T6
Length: 3⅛"(80Mm), Width: 3⅛"(80Mm).
Weight: 9.35Oz(265G)-One Pack, 3.6Lb(1.63Kg)-6 Pack.
Thickness: 7/32"(5.6Mm), Hole Diameter: 3/4"(20Mm), Apply For 3/4" Bolt.
Features
- 6 Packs Bearing Plate, Carbon Steel, Surface Hot Dip Galvanized
- Thickness: 7/32(5.6mm), Hole Diameter: 3/4(20mm), Apply for 3/4 Bolt
- Length: 3 (80mm), Width: 3 (80mm)
- Weight: 9.35oz(265g)-one pack, 3.6lb(1.63kg)-6 pack
- See more on Amazon...
Brand: heneng | Manufacturer: heneng
Dimensions: 0.22 x 3.15 x 3.15 Inches
See On Amazon #14
uxcell Square Washer, 20pcs M5x20x20x1.5mm 304 Stainless Steel Square Plate Washers Flat Pad Spacer Gasket for Hardware Fastener
Asin: B0C2KJK3B8
Advantages: Square Washers Provide More Contact Area For Fasteners, It Is A Good Choice For Applications Requiring Higher Carrying Capacity, Provide Greater Stability And Prevent Loosening..
Note: When Purchasing A Square Washer, You Need To Determine The Correct Size, Thickness, And Material For Your Intended Application. These Factors Can Greatly Affect The Performance And Durability Of The Washer..
Application: Square Washers Fit Into Slots And Channels And Have Flat Sides To Keep Them From Rotating, Commonly Used In Mechanical Equipment And Wood Construction, Where They Create More Friction When Tightening The Wood And Are Used To Fix Bolts, Screws And Other Fasteners. Such As Use With Carriage Bolts To Secure Roof Trusses. Widely Used In Construction, Plumbing, Electrical, Automotive And Other Industries, Etc..
Material: Square Plate Washers Are Made Of 304 Stainless Steel, Rust And Corrosion-Resistant, With Good Heat And Low Temperature Strength, Suitable For Indoor And Outdoor Use..
Features
- Product Name: Square Washer; Fit Screw/Bolt Thread Diameter: M5(#10); Inside Diameter: 5.5mm / 0.22"; Outside Size: 20 x 20 x 1.5mm / 0.79" x 0.79" x 0.06"(L*W*T); Package Content: 20pcs x Square Washers
- Material: Square plate washers are made of 304 stainless steel, rust and corrosion-resistant, with good heat and low temperature strength, suitable for indoor and outdoor use.
- Advantages: Square washers provide more contact area for fasteners, it is a good choice for applications requiring higher carrying capacity, provide greater stability and prevent loosening.
- Application: Square washers fit into slots and channels and have flat sides to keep them from rotating, commonly used in mechanical equipment and wood construction, where they create more friction when tightening the wood and are used to fix bolts, screws and other fasteners. Such as use with carriage bolts to secure roof trusses. Widely used in construction, plumbing, electrical, automotive and other industries, etc.
- Note: When purchasing a square washer, you need to determine the correct size, thickness, and material for your intended application. These factors can greatly affect the performance and durability of the washer.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
20 Pcs Beveled Square Washers in Plain Low Carbon Steel,3/4"(ID) x1-5/8"x1-5/8" Wedge Shaped Washers for Shim Leveling,Thickness: 3.3~9.3mm(1:4 Slope)
Asin: B0CXJ7HBZM
Hole Diameter（1Pcs)：Φ20mm For 3/4 " Bolt..
Beveled Square Washers Are Used In Areas Where The Surfaces Of A Fastener Assembly Are Not Even.Often Used On An I-Beam's Flange To Provide A Parallel Bearing Surface..
Material:Low Carbon Steel,Plain Finish..
Thickness: 3.3~9.3Mm(Slope:1:4)..
Features
- Beveled Square Washer Size:40x40mm/1-5/8"x1-5/8".
- Thickness: 3.3~9.3mm(Slope:1:4).
- Hole diameter 1pcs) 20mm for 3/4 bolt.
- Material:low carbon steel,Plain finish.
- Beveled square washers are used in areas where the surfaces of a fastener assembly are not even.Often used on an I-beam's flange to provide a parallel bearing surface.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
See On Amazon #16
Square Washers Hot Dipped Galvanized - 5/8" (ID 11/16", OD 2", THK 0.125") - Qty-25
Asin: B01AZW4E5Y | Ean: 0730656603941 | UPC: 730656603941
Commonly Used To Limit The Effect Of Vibration From Loosening A Fastener Assembly..
Square Washers Are Shown To Function Better In Earthquakes And Are Recommended For Buildings Where Seismic Activity Is Likely..
Square Washers Are Similar To Fender Washers But Have A Much Larger Profile And Feature A Square Shape..
Due To Their Larger Surface Area, More Contact Can Help To Hold The Washer In Place..
Features
- Square washers are washers with a greater resistance to movement than a regular washer once fastened.
- Due to their larger surface area, more contact can help to hold the washer in place.
- Commonly used to limit the effect of vibration from loosening a fastener assembly.
- Square washers are similar to fender washers but have a much larger profile and feature a square shape.
- Square washers are shown to function better in earthquakes and are recommended for buildings where seismic activity is likely.
- See more on Amazon...
Brand: Raw Products Corp | Manufacturer: Raw Products Corp
Weight: 2.55 pounds
See On Amazon #17
10 Pcs Square Plate Washers, 5/8"(ID) x2-3/8"x2-3/8", Flat Bearing Washer Fastener, Thickness 2.8mm, Fit for 5/8" Bolt, 304 Stainless Steel
Asin: B0CNYH2WJ8 | Model: DP15-T10 | PartNumber: DP15-T10
Hole Size: Φ17mm (Fit For 5/8" Bolt).
304 Stainless Steel Material Has Good Corrosion Resistance, Heat Resistance, Low Temperature Strength And Mechanical Properties..
Weight: 75G(1 Pcs), 785G(10 Pcs).
Size: 2-3/8X2-3/8 Inches, Thickness: 2.8Mm.
Features
- Material: Stainless steel 304, Finish: brushed
- Size: 2-3/8x2-3/8 inches, Thickness: 2.8mm
- Hole size: 17mm (fit for 5/8 bolt)
- Weight: 75g(1 pcs), 785g(10 pcs)
- 304 stainless steel material has good corrosion resistance, heat resistance, low temperature strength and mechanical properties.
- See more on Amazon...
Brand: heneng | Manufacturer: heneng
Dimensions: 0.11 x 2.36 x 2.36 Inches
See On Amazon #18
10 Pcs 5/8"(ID) x1/8"x3"x3" Square Plate Washers,Black Powder Coating Carbon Steel Bearing Plate,Thickness 3.1mm
Asin: B0CSS46YHK | Model: DP01-B-T10 | PartNumber: DP01-B-T10
Hole Diameter : Φ16.8Mm For 5/8 Bolt..
Package List: 10 Pcs Square Washers Plate,Bolt Not Include..
Square Washers Plate Used In Light Steel Frame Housing Fittings, Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, And Their Applications In Many Areas..
Length: 3"(75 Mm), Width: 3"(75 Mm) ,Thickness: 3.1Mm..
Features
- Material: Carbon steel Q345 , surface powder coating.
- Length: 3(75 mm), Width: 3(75 mm) ,Thickness: 3.1mm.
- Hole Diameter : 16.8mm for 5/8 bolt.
- Square Washers Plate used in light steel frame housing fittings, construction sites, machinery and industrial equipment and other related scenes, and their applications in many areas.
- Package List: 10 Pcs square washers plate,bolt not include.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
See On Amazon #19
Dreneco Square Plate Washer, Stainless Steel Heavy Duty Square Washers M6 20 1.5,20 pcs
Asin: B08NPQDLSX | Ean: 6271937269936
Features: Designed To Be Used In Conjunction With Carriage Bolts For The Securing Of Roof Trusses But Can Also Be Used In A Variety Of Ways On Many Different Projects.Can Be Used With All Types Of Bolts And Nuts..
Wide Application: Square Plate Washers Can Be Used For Many Industries And For Many Different Exterior Applications.Often Used In Timber Construction, Since They Develop More Friction When Tightened Against Wood. They Are Also Suitable For A Variety Of Applications Where A Heavy Washer Is Required..
Usage: Ideal For Use With Carriage Bolts In Structural Timber Fastening Applications Such As Joist Work And Decking.Large Surface Area Suitable For Heavy Duty Fastening..
Fastener Type: Square Flat Washer.
Features
- Material: Durable 304 stainless steel.Compared with normal stainless steel,it's safer, more durable,non-toxic and corrosion resistant.It is of high hardness and not easy to deform.It can be used in outdoor humid environment.
- Fastener Type: Square Flat Washer
- Features: Designed to be used in conjunction with carriage bolts for the securing of roof trusses but can also be used in a variety of ways on many different projects.Can be used with all types of bolts and nuts.
- Usage: Ideal for use with carriage bolts in structural timber fastening applications such as joist work and decking.Large surface area suitable for heavy duty fastening.
- Wide Application: Square plate washers can be used for many industries and for many different exterior applications.Often used in timber construction, since they develop more friction when tightened against wood. They are also suitable for a variety of applications where a heavy washer is required.
- See more on Amazon...
Brand: Dreneco | Manufacturer: Ruiren
See On Amazon #20
50Pcs 1-1/8" x 1-1/8" Beveled Square Washers, Hot Dipped Galvanized,Wedge Shaped Washers for Shim & Leveling,Thickness: 2~4.5mm(1:6 Slope),Hole Diameter: 13mm for 1/2 Bolt
Asin: B0CG1CBLSY
Beveled Square Washers Are Used In Areas Where The Surfaces Of A Fastener Assembly Are Not Even..
Package:50 X Beveled Square Washer Plate..
Designed For Use With Standard I-Beams And Channels That Have A 1:6 Slope..
Beveled Square Washer Size:28X28mm. Thickness: 2~4.5Mm,Hole Diameter（1Pcs)：Φ13mm For 1/2 " Bolt..
Features
- Square Beveled Washers in Carbon steel Q235B,Surface treatment: hot dip galvanized.
- Beveled Square Washer Size:28x28mm. Thickness: 2~4.5mm,Hole diameter 1pcs) 13mm for 1/2 bolt.
- Beveled square washers are used in areas where the surfaces of a fastener assembly are not even.
- Designed for use with standard I-beams and channels that have a 1:6 slope.
- Package:50 x Beveled Square Washer Plate.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.18 x 1.10 x 1.10 Inches
See On Amazon #21
20 Pack - 3" Square Washer Plate, Strut Channel Bearing Plate - Heavy Duty, Zinc Plated Steel (20)
Asin: B0CFVSLZDN | Model: ST-106 | PartNumber: ST-106 | Ean: 0810132343247 | UPC: 810132343247
Plate Measures: 3" Long, 3” Wide, 1/8" Thick, Hole Measures 9/16" (14 Mm) Diameter - Fits 5/8" Bolt (Not Included).
Made From Heavy Duty 1/8" (3 Mm) Thick Zinc Plated Steel - Zinc Coated To Prevent Rusting And Corrosion.
Features
- 20 Pack of 3" Square Washer Plates for Strut Channel
- Made from heavy duty 1/8 (3 mm) thick zinc plated steel - Zinc coated to prevent rusting and corrosion
- Plate measures: 3 long, 3 wide, 1/8 thick, hole measures 9/16 (14 mm) diameter - Fits 5/8 Bolt (NOT included)
- See more on Amazon...
Brand: A.A | Manufacturer: Automotive Authority LLC
Dimensions: 0.20 x 3.00 x 3.00 inches
See On Amazon #22
10 PCS 5/8"(ID) x2-1/2"x2-1/2" Heavy Duty Square Plate Washer Plain, Fit for 5/8" Bolt, Square Flat Washers Bearing Plate Fastener, 4.8mm Thickness
Asin: B0CTMMFJV9 | Model: DP26-T10 | PartNumber: DP26-T10
Hole Diameter: Φ18mm, For 5/8" Bolt.
Square Washers Can Be Used In Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, Their Applications Can Be Seen In Many Areas..
Package List: 10Pcs Square Washer (Bolt Not Included).
Length: 2-1/2"(63Mm), Width: 2-1/2"(63Mm), Thickness: 5.8Mm.
Features
- Material: Low carbon steel, Finish: Plain
- Length: 2-1/2(63mm), Width: 2-1/2(63mm), Thickness: 5.8mm
- Hole Diameter: 18mm, for 5/8 Bolt
- Package list: 10pcs Square Washer (Bolt not included)
- Square washers can be used in construction sites, machinery and industrial equipment and other related scenes, their applications can be seen in many areas.
- See more on Amazon...
Brand: Fanmao | Manufacturer: Fanmao
Dimensions: 0.23 x 2.48 x 2.48 Inches
See On Amazon #23
30 Pcs Square Washers Plate 3/8"(ID) x1-5/8"x1-5/8", Electrogalvanized Steel Thickness 2.8mm Bearing Plate Square Strut Channel Washer
Asin: B0CT36YR5C
Hole Diameter : Φ10.5Mm For 3/8 Bolt..
Package List: 30 Pcs Square Washers Plate,Bolt Not Include..
Square Washers Plate Used In Light Steel Frame Housing Fittings, Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, And Their Applications In Many Areas..
Length: 1-5/8"(40 Mm), Width: 1-5/8"(40 Mm) ,Thickness: 2.8Mm..
Features
- Material: Carbon steel Q345 , surface electrogalvanized.
- Length: 1-5/8(40 mm), Width: 1-5/8(40 mm) ,Thickness: 2.8mm.
- Hole Diameter : 10.5mm for 3/8 bolt.
- Square Washers Plate used in light steel frame housing fittings, construction sites, machinery and industrial equipment and other related scenes, and their applications in many areas.
- Package List: 30 Pcs square washers plate,bolt not include.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.11 x 1.57 x 1.57 inches
See On Amazon #24
6 PCS 3/4" (ID) x 4" x 4" Heavy Duty Square Plate Washers for 3/4" Bolt, Plain Finish Square Flat Washers Bearing Plate Fastener, 5.8mm Thickness
Asin: B0CTMD85JS | Model: DP25-T6 | PartNumber: DP25-T6
Hole Diameter: Φ21mm, For 3/4" Bolt.
Square Washers Can Be Used In Construction Sites, Machinery And Industrial Equipment And Other Related Scenes, Their Applications Can Be Seen In Many Areas..
Package List: 6Pcs Square Washer(Bolt Not Included).
Length: 4"(100Mm), Width: 4"(100Mm), Thickness: 5.8Mm.
Features
- Material: Low carbon steel, Finish: Plain
- Length: 4(100mm), Width: 4(100mm), Thickness: 5.8mm
- Hole Diameter: 21mm, for 3/4 Bolt
- Package list: 6pcs Square Washer(Bolt not included)
- Square washers can be used in construction sites, machinery and industrial equipment and other related scenes, their applications can be seen in many areas.
- See more on Amazon...
Brand: Fanmao | Manufacturer: Fanmao
Dimensions: 0.29 x 4.00 x 4.00 Inches
See On Amazon #25
HOBBYIN Square Washer, 10Pcs M3 M4 M5 M6 M8 304 Stainless Steel Square Plate Washers Flat Pad Spacer Gasket for Hardware Fastener(M5x20x20x1.5)
Asin: B0D1JX41KV
Multiple Thickness Options: The Square Washers Are Available In Three Different Thicknesses, Including 1Mm, 1.5Mm, And 2Mm. This Allows You To Select The Desired Thickness For Achieving The Desired Level Of Stability And Support In Your Hardware Connections..
Convenient Quantity: This Pack Includes 10Pcs Of Square Washers, Giving You An Ample Supply For Your Hardware Fastening Needs. Whether You're Working On Diy Projects Or Professional Applications, These Square Washers Are Brand New And Of High Quality, Providing Reliable Support And Stability For Your Hardware Connections..
Sleek Silver Design: These Square Washers Feature A Silver Color, Adding A Sleek And Modern Look To Your Hardware Fastening Projects. The Stainless Steel Construction Enhances Their Visual Appeal And Ensures Long-Lasting Performance..
Versatile Size Options: These Square Washers Come In Five Different Sizes, Including M3, M4, M5, M6, And M8. This Variety Allows You To Choose The Appropriate Size For Your Specific Hardware Fastening Needs..
Features
- Premium Quality Stainless Steel Square Washers: This pack of 10pcs square washers is made from high-quality 304 stainless steel, ensuring excellent durability for reliable hardware fastening.
- Versatile Size Options: These square washers come in five different sizes, including M3, M4, M5, M6, and M8. This variety allows you to choose the appropriate size for your specific hardware fastening needs.
- Multiple Thickness Options: The square washers are available in three different thicknesses, including 1mm, 1.5mm, and 2mm. This allows you to select the desired thickness for achieving the desired level of stability and support in your hardware connections.
- Sleek Silver Design: These square washers feature a silver color, adding a sleek and modern look to your hardware fastening projects. The stainless steel construction enhances their visual appeal and ensures long-lasting performance.
- Convenient Quantity: This pack includes 10pcs of square washers, giving you an ample supply for your hardware fastening needs. Whether you're working on DIY projects or professional applications, these square washers are brand new and of high quality, providing reliable support and stability for your hardware connections.
- See more on Amazon...
Brand: HOBBYIN | Manufacturer: HOBBYIN
Amazon Price: $5.99 | as of 04/25/2024
(12:08pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #26
eoere 20 PCS 2"(51 mm) Aluminum Flat Plate Square Washer for Aluminum Profiles Solar Panel Mounting Solar Clamp, Thickness 6 mm, Hole diam: 15 mm, Apply 1/2" Bolt
Asin: B0D21Q63B5
Size: 2"(51 Mm).
Specially Designed For Solar Panel Mounting.
Hole Diam: 15 Mm, Apply 1/2" Bolt.
Thickness: 6 Mm.
Features
- Material: Aluminum Alloy 6063, Surface treatment: Mill Finish
- Thickness: 6 mm
- Size: 2(51 mm)
- Hole diam: 15 mm, Apply 1/2 Bolt
- Specially designed for solar panel mounting
- See more on Amazon...
Brand: eoere | Manufacturer: eoere
Dimensions: 0.24 x 2.00 x 2.00 Inches | Weight: 0.09 pounds
See On Amazon #27
O Ring Sealing Gasket Food Grade Silicone Sealing Washer Kit for Faucet Auto Repair 225PCS Rubber O-Ring Sealing
Asin: B0D2H9W2D9
Easy To Install: The Silicone Faucet O Ring Kit Is Easy To Install And Suitable For Sealing Gasoline, Water, Air, Gas And Various Chemicals..
Function: The Sealing Washer For Faucet Can Prevent Pipeline Leakage And Provide Good Sealing Effect..
You Will Get: The O Ring Kit Includes 225 O Ring Sealing Gaskets To Meet Your Usage Needs..
Application: The Repair Gasket Ring Is Widely Used As Sealing Ring And Gaskets For Hydraulic Machinery, Pipelines And Other Connections..
Features
- Material: The O Ring Sealing Gasket made of food grade silicone is flexible, featuring high temperature resistance, corrosion resistance, strong sealing and insulation.
- Application: The Repair Gasket Ring is widely used as sealing ring and gaskets for hydraulic machinery, pipelines and other connections.
- Easy to install: The Silicone Faucet O Ring Kit is easy to install and suitable for sealing gasoline, water, air, gas and various chemicals.
- You will get: The O Ring Kit includes 225 O Ring Sealing Gaskets to meet your usage needs.
- Function: The Sealing Washer for Faucet can prevent pipeline leakage and provide good sealing effect.
- See more on Amazon...
Brand: Hperu | Manufacturer: Hperu
Dimensions: 0.79 x 3.94 x 1.97 Inches | Weight: 0.21 pounds
See On Amazon #28
Square Washers Hot Dipped Galvanized - 1/2" (ID 9/16", OD 2", THK 0.195") - Qty-25
Asin: B01AZW080E | Ean: 0730656603934 | UPC: 730656603934
Commonly Used To Limit The Effect Of Vibration From Loosening A Fastener Assembly..
Square Washers Are Shown To Function Better In Earthquakes And Are Recommended For Buildings Where Seismic Activity Is Likely..
Square Washers Are Similar To Fender Washers But Have A Much Larger Profile And Feature A Square Shape..
Due To Their Larger Surface Area, More Contact Can Help To Hold The Washer In Place..
Features
- Square washers are washers with a greater resistance to movement than a regular washer once fastened.
- Due to their larger surface area, more contact can help to hold the washer in place.
- Commonly used to limit the effect of vibration from loosening a fastener assembly.
- Square washers are similar to fender washers but have a much larger profile and feature a square shape.
- Square washers are shown to function better in earthquakes and are recommended for buildings where seismic activity is likely.
- See more on Amazon...
Brand: Raw Products Corp | Manufacturer: Raw Products Corp
Weight: 3.93 pounds
See On Amazon #29
Forgefix SQPL5012M Square Plate Washer - Zinc Plated
Asin: B009HN412E | Model: SQPL5012M | PartNumber: SQPL5012M | Ean: 5028485023500
Suitable For Heavy-Duty Fastening.
Distributes The Load Evenly Under The Bolt Head.
Can Be Used With All Types Of Bolts And Nuts.
Bright Zinc Plated For Increased Resistance To Corrosion.
Features
- Ideal for use with carriage bolts in structural timber fastening applications such as joist work and decking
- Bright zinc plated for increased resistance to corrosion
- Suitable for heavy-duty fastening
- Can be used with all types of bolts and nuts
- Distributes the load evenly under the bolt head
- See more on Amazon...
First Available: 09/12/2013
Brand: Forgefix | Manufacturer: Forgefix
Dimensions: 7.09 x 5.91 x 0.79 Inches | Weight: 0.13 pounds
See On Amazon #30
Hard-to-Find Fastener 014973151898 Square Washers, 5/8x 2-1/2 x3/16, Piece-25
Asin: B00L1ISM1Y | Model: 014973151898 | PartNumber: 014973151898 | Ean: 0738287094268, 0014973151898 | UPC: 014973151898, 738287094268
Length: 2-1/2 Inches.
Material: Steel.
Thickness: 3/16 Inches.
Diameter 2: 2-1/2 Inches.
Features
- Diameter 1: 5/8 inches
- Diameter 2: 2-1/2 inches
- Length: 2-1/2 inches
- Thickness: 3/16 inches
- Material: Steel
- See more on Amazon...
Brand: Hard-to-Find Fastener | Manufacturer: Hard-to-Find Fastener
Dimensions: 3.00 x 4.75 x 4.00 inches
See On Amazon
Looking For Something Else?
Search