Best ball nose end mills - Buying Guide
Last Updated: 04/24/2024
Share on
Bestselling ball nose end mills on Amazon
- Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-...
- Carbide Ball Nose CNC Router Bit 1/4 Inch Shank 1/8 Cutting Diameter Spiral Ball Nose End Mill, Idea...
- Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25...
- OUYANG 40Pcs End Mill CNC Router Bits, 1/8" Shank CNC Engraving Bits, 2 Flute Flat Nose and Ball Nos...
- BestParts High Performance Ball Nose Solid Carbide End Mill - AlTiN Coated, 4 Flute, 30 Degree Helix...
- ASNOMY 5PCS 1-4mm Ball Nose Carbide End Mill Set, CNC Cutter Router Bits 2 Flute Spiral Milling Tool...
- SpeTool Tapered Ball Nose End Mill 1/4" X 3" with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26De...
- SpeTool Tapered Ball Nose End Mill 1/4" Shank with 1/32" Cutting Radius (1/16" Diameter) for 3D Carv...
- End Mill Sets, Tungsten Steel CNC Router Burrs End Milling Engraving Bits Drilling Hole Tool for PCB...
- Genmitsu 10pcs 2-Flute Nano Blue Coat Ball Nose Spiral End Mill, 1/8'' Shank, 0.8mm-2.5mm Cutting Di...
#1
Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose, Nano Blue Coat & Titanium Coat, MC40A
Asin: B08CD99PWL | Model: MBS-001 | PartNumber: MBS-001 | Ean: 4897093844385
Two End Mill Sets -- Shank Diameter: 3.175Mm, Cutting Diameter: 0.8 - 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Coating..
Wide Compatibility: The Mc40a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device.
Applicable Materials: Widely Used In Various Materials Including Plastics, Aluminum, Circuit Board, Wood, As Well As Other Precision Parts Processing..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175Mm, Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm..
Features
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 3.18 inches
See On Amazon #2
Carbide Ball Nose CNC Router Bit 1/4 Inch Shank 1/8 Cutting Diameter Spiral Ball Nose End Mill, Ideal for Wood Carving Engraving Grinding
Asin: B0CWLPZVNN | Model: SPWS2QX6.3.12 | PartNumber: SPWS2QX6.3.12 | Ean: 0785034490750 | UPC: 785034490750
🟢Design Features: Dual Flute Design For Quick Chip Removal, Ball Nose, Is Ideal For 3D Contouring, Shaping, And Machining Complex Surfaces With A Smooth Finish..
🟢Brand: Sharpro's Business Scope Spans The Entire Industry Chain, With Dedicated Centers For Design, Engineering, Research, And Development. Each Tool Is Assigned A Unique Serial Number For Easy Tracking, Ensuring Traceability And Quality Control Throughout The Production Process..
🟢Durability: Made Of Tungsten Carbide, Equally Spaced Blades Increase The Rigidity Of The Tool Body, Allowing For High-Speed Cutting Of Soft Materials Such As Wood, Which Has A Longer Service Life..
🟢Compatibility: Suitable For Handhold Routers, Cnc Routers, Engraving Machines, Cnc Milling Machines, Cnc Machining Centers And Traditional Milling Machines, It Performs Well In Both Home And Professional Environments..
Features
- Specification: 1/4 shank, 1/8 cutting diameter ball nose spiral router bit, 1/16 radius, 12mm cutting length, 50mm total length. Sharper blade for clean and smooth handling of all kinds of wood carving engraving grinding.
- Compatibility: Suitable for handhold routers, CNC routers, engraving machines, CNC milling machines, CNC machining centers and traditional milling machines, it performs well in both home and professional environments.
- Design Features: Dual flute design for quick chip removal, ball nose, is ideal for 3D contouring, shaping, and machining complex surfaces with a smooth finish.
- Durability: Made of tungsten carbide, equally spaced blades increase the rigidity of the tool body, allowing for high-speed cutting of soft materials such as wood, which has a longer service life.
- Brand: SHARPRO's business scope spans the entire industry chain, with dedicated centers for design, engineering, research, and development. Each tool is assigned a unique Serial Number for easy tracking, ensuring traceability and quality control throughout the production process.
- See more on Amazon...
Brand: SHARPRO | Manufacturer: SHARPRO
See On Amazon #3
Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat, R0.25-1.0, 1/8 Shank, TB04A
Asin: B08CDBHY3P | Model: MBS-004 | PartNumber: MBS-004 | Ean: 4897093844453
Versatile: Perfect For 3D Machining Jobs Like Molds, Rapid Prototyping, Models And Other Other Precision Parts Processing, These Tapered Ball Nose Bits Can Do The Best..
Wide Compatibility: Genmitsu Tb04a Tapered Ball Nose End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
Applicable Materials: These Nano Blue Coating Bits Have An Hrc Rating Of 65 And Are Optimal For Milling A Wide Range Of Materials, Including Plastics, Aluminum, Circuit Board, Wood, Etc. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Cost-Effective: Coming With 4X 2-Flute Tapered Ball Nose End Mills, Shank Diameter: 3.175Mm, Radius: 0.25, 0.5, 0.75, 1.0Mm, Cutting Length: 15Mm, Overall Length: 40Mm..
Features
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
- Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
- Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #4
OUYANG 40Pcs End Mill CNC Router Bits, 1/8" Shank CNC Engraving Bits, 2 Flute Flat Nose and Ball Nose Carbide Endmill, Nano Blue Coat and Titanium Coat End Mill Bits
Asin: B0CNJXPNFP
【Milling Tool Set】You Will Receive A Total Of 40 Milling Cutters, Including 10 Flathead Milling Cutters, 10 Ball End Milling Cutters, 10 Nano Blue Coated Bits And 10 Titanium Coated Bits. The Different Size Specifications Will Meet Almost All Your Needs..
【Efficient Service】The End Mills Are Widely Used In Metalworking, Tool Making, Wood Carving, Jewelry Making, Grinding And Engraving. This Is A Must-Have Kit For Woodworkers And Hobbyists Who Work With Metal.If You Have Any Questions About The Products, Please Feel Free To Ask Us..
【Applications And Compatibility】The End Mill Set Is Compatible With Most Bench Top Cnc Machines Such As The 3018 Series As Well As Other Industrial Cnc Machines. Just Be Sure To Select The Correct Size Collet For Your Machine. Great For Cutting, Carving, Slotting, Milling And More..
【Regular Size】Total Length Of Cnc Milling Cutter: 38Mm, Cutting Length: 17Mm, Cutting Diameter: 0.8 - 3.0Mm(0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm). Universal 3.175Mm (1/8") Round Shank Design For Easier Clamping. Excellent Milling Performance, High Efficiency, Smooth Chip Removal, No Dust Pollution, Stable And Reliable ..
Features
- Excellence in Quality Cnc router bits made of ultra-fine grain tungsten carbide material (tungsten steel) with smooth, burr-free surface and high precision. Nano-coating and titanium coating extends tool life and performance. Ideal for roughing, grooving, etc.
- Regular Size Total length of CNC milling cutter: 38mm, Cutting length: 17mm, Cutting diameter: 0.8 - 3.0mm(0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm). Universal 3.175mm (1/8) round shank design for easier clamping. Excellent milling performance, high efficiency, smooth chip removal, no dust pollution, stable and reliable .
- Milling Tool Set You will receive a total of 40 milling cutters, including 10 flathead milling cutters, 10 ball end milling cutters, 10 nano blue coated bits and 10 titanium coated bits. The different size specifications will meet almost all your needs.
- Applications and Compatibility The end mill set is compatible with most bench top CNC machines such as the 3018 series as well as other industrial CNC machines. Just be sure to select the correct size collet for your machine. Great for cutting, carving, slotting, milling and more.
- Efficient service The end mills are widely used in metalworking, tool making, wood carving, jewelry making, grinding and engraving. This is a must-have kit for woodworkers and hobbyists who work with metal.If you have any questions about the products, please feel free to ask us.
- See more on Amazon...
Brand: OUYANG | Manufacturer: Twotrees
See On Amazon #5
BestParts High Performance Ball Nose Solid Carbide End Mill - AlTiN Coated, 4 Flute, 30 Degree Helix, 1/2" Cutting Diameter, 1/2" Shank Diameter, 1" Length of Cut, 3" Overall Length
Asin: B0C3HRWGB1
Material: Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures..
Application: Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials..
Features: Precision Ground Using The Highest Quality Grinding Wheels. High Strength And Hardness, Abrasion Resistant, Practical, Easy To Use And Durable In Use. Premium 10% Micrograin Carbide Perfect For Your General Purpose Or Difficult Application..
Coated: Altin Coated For Improved Performance And Tool Life In Harder Materials Or High Temperature Applications..
Features
- Size: 1/2" cutting diameter x 1/2" shank diameter x 1" length of cut x 3" overall length, 4 Flute, 30 Degree Helix, Ball Nose, Solid Carbide End Mill, AlTiN Coated.
- Coated: AlTiN Coated for improved performance and tool life in harder materials or high temperature applications.
- Material: Solid carbide tools offer long tool life and faster cutting speeds than other substrates, Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Features: Precision ground using the highest quality grinding wheels. High strength and hardness, abrasion resistant, practical, easy to use and durable in use. Premium 10% Micrograin Carbide perfect for your general purpose or difficult application.
- Application: Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials.
- See more on Amazon...
Brand: BestParts | Manufacturer: BestParts
See On Amazon #6
ASNOMY 5PCS 1-4mm Ball Nose Carbide End Mill Set, CNC Cutter Router Bits 2 Flute Spiral Milling Tool HRC55, Includes 5 Radius Sizes of 1mm 1.5mm 2mm 3mm 4mm
Asin: B09V131ZS1 | Ean: 0725576864336 | UPC: 725576864336
Widely Application: Nano Carbide Ball Nose Mill Tools Perfect For Hard Materials Carbon Steels , Alloy Steels , Pre-Hardened Steels , Hardened Steels, Cast Iron,Titanium Alloy, Graphite, Plastic, Composite Material Etc;.
Satisfaction: Asnomy Aims To Provide High-Grade Products And Customer Service To All Customers. Any Problems, Just Contact Us And Our After-Sale Team Will Solve Your Problems Asap..
R1.0 - R4.0Mm End Mill Set: This 2 Flute Ball Nose Milling Cutter Set Include 5Pcs Altin Coated End Mill, No Longer Have To Worry About Wastage, Can Satisfy Your Different Needs;.
Altin Coating: Titanium Aluminum Nitride (Altin) Coating Lubricates The End Mill For Stability At High Temperature And Superior Wear Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Tialn, Tin Or Ticn Coatings;.
Features
- Top Quality: The End Mill Round Top with 2-Flute Made from HRC55 Carbide with AlTiN Coated that is very tough, resists wear and offers high cutting performan;
- AlTiN Coating: Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings;
- Widely Application: Nano carbide ball nose Mill tools perfect for Hard Materials carbon steels , alloy steels , pre-hardened steels , hardened Steels, cast iron,Titanium Alloy, Graphite, plastic, composite material etc;
- R1.0 - R4.0mm End Mill Set: This 2 flute ball nose Milling Cutter set include 5pcs AlTiN Coated end mill, no longer have to worry about wastage, can satisfy your different needs;
- Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #7
SpeTool Tapered Ball Nose End Mill 1/4" X 3" with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated
Asin: B07B942PQL | Model: R0.25-D1/4-G | PartNumber: R0.25-D1/4-G
Applicable Materials. Spetool Cnc Bits For Carving, Suitable For 2D/3D Carving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Spiral Router Bit With Ball End Perfect For Cnc Engraving Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Tapered Angle Ball Nose End Mill / Cone Cutters, Super Design For Carving And Clearing Edge; Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials.
Features
- SPECIFICATION. 2 flute, 0.25MM ball radius, 5.26deg, 1-1/4" CL, 3" OL, 1/4" shank, H-Si coated, 55HRC, can be used on routers with 1/4" collect;
- 2-FLUTE DESIGN. Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge; ball nose and spiral design, ensuring smooth and efficient cutting through various materials
- APPLICABLE MATERIALS. SpeTool CNC bits for Carving, suitable for 2D/3D carving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc spiral router bit with ball end perfect for CNC engraving machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 3.00 x 0.25 Inches
See On Amazon #8
SpeTool Tapered Ball Nose End Mill 1/4" Shank with 1/32" Cutting Radius (1/16" Diameter) for 3D Carving Engraving Router Bit, ZrN Coated
Asin: B08FMBFGCY | Model: R1.5-D1/4-G | PartNumber: R1.5-D1/4-G
Applicable Materials. Spetool 3D Spiral Router Bits, Suitable For 2D/3D Carving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Router Bit With Ball End Perfect For Cnc Engraving/Carving 3D Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Tapered Angle Ball Nose End Mill / Cone Cutters, Super Design For Carving And Clearing Edge; Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials.
Features
- SPECIFICATION. 2 flute, 1/32" radius, 5.38deg single side angle, 1" CL, 1/4" shank, 2-1/2" OL, ZrN Coated, HRC55, can be used on routers with 1/4" collect;
- 2-FLUTE DESIGN. Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge; ball nose and spiral design, ensuring smooth and efficient cutting through various materials
- APPLICABLE MATERIALS. SpeTool 3D spiral router bits, suitable for 2D/3D carving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc router bit with ball end perfect for CNC engraving/carving 3D machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #9
End Mill Sets, Tungsten Steel CNC Router Burrs End Milling Engraving Bits Drilling Hole Tool for PCB Circuit Board, Plastic, Fiber, Wood, Copper 0.5~3.175mm Set of 12
Asin: B07HQVGYZW | Ean: 0703063414547 | UPC: 703063414547
Set Of 12 Different Size: Cutting Size: 0.5Mm, 0.8Mm, 1Mm, 1.2Mm, 1.5Mm, 1.6Mm, 1.8Mm, 2Mm, 2.4Mm, 2.5Mm, 3Mm, 3.175Mm. Shank Size: Diameter, About 3Mm, Length, About 22Mm. 12 Pcs Different Size For Meeting Your Needs.
Warranty: We Promise Provide Satisfied Service For Every Client, If There Is Any Quality Issue, We Can Send A New Replacement Or Refund Full Refund..
Widely Using Application: These Cnc Router Burrs Mainly Used For Cutting And Engraving And Worked On Acrylic, Pvc, Nylon, Resin, Pcb Circuit Board Perfectly. Attention: Don't Use On Too Hard Material, Like High Hardness Iron..
Highly Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Features
- Material: Made of Tungsten Steel, highly wear resistance, high hardness, bending strength, highly working efficiency
- Highly precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Set of 12 different size: Cutting Size: 0.5mm, 0.8mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2mm, 2.4mm, 2.5mm, 3mm, 3.175mm. Shank Size: diameter, about 3mm, length, about 22mm. 12 pcs different size for meeting your needs
- Widely using application: These CNC router burrs mainly used for cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, PCB circuit board perfectly. Attention: Don't use on too hard material, like high hardness iron.
- Warranty: We promise provide satisfied service for every client, if there is any quality issue, we can send a new replacement or refund full refund.
- See more on Amazon...
Brand: Knugoua | Manufacturer: Knugoua
Dimensions: 0.05 x 1.46 x 0.05 Inches | Weight: 0.00 pounds
See On Amazon #10
Genmitsu 10pcs 2-Flute Nano Blue Coat Ball Nose Spiral End Mill, 1/8'' Shank, 0.8mm-2.5mm Cutting Diameter, CNC Router Bits for Wood Working Acrylic MDF PVC ABS, BN10A
Asin: B08M5V3KWZ | Ean: 4897093845368
Shank Diameter: 1/8'' (3.175Mm), Cutting Diameter: 0.8Mm-2.5Mm (0.8/1.0/1.5/2.0/2.0/2.0/2.0/2.0/2.5/2.5Mm), Cutting Length: 4Mm-22Mm, Overall Length: 35/38Mm.
Versatile: Widely Used For Metalwork, Toolmaking, Model Engineering, Carving, Cutting, Engraving, Milling, Slotting, Drilling, Sculpting..
Applicable Materials: Suitable For Such As Wood, Mdf, Plastics, Acrylic, Aluminum, Soft Metal, Etc..
Nano Blue Coating: The End Mills Are Nano Blue Coating, Which Is High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality..
Features
- High-quality Material: The end mills are made of tungsten carbide steel alloy that can keep continuous machining for 800 minutes.
- Nano Blue Coating: The end mills are Nano blue coating, which is high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Shank diameter: 1/8'' (3.175mm), cutting diameter: 0.8mm-2.5mm (0.8/1.0/1.5/2.0/2.0/2.0/2.0/2.0/2.5/2.5mm), cutting length: 4mm-22mm, overall length: 35/38mm
- Applicable Materials: Suitable for such as wood, MDF, plastics, acrylic, aluminum, soft metal, etc.
- Versatile: Widely used for metalwork, toolmaking, model engineering, carving, cutting, engraving, milling, slotting, drilling, sculpting.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 0.12 Inches
See On Amazon #11
SPEED TIGER Carbide Tapered End Mill - ITBTA CNC Carving Bits, Ball Tip R0.5, 1/4"Shank 3"OVL - for Metal, Steel, and Wood - Professional Mill Bits Sets
Asin: B08V1BD4H6 | Model: ITBTA0500482 | PartNumber: ITBTA0500482
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Naco Coating - This Coating, Made Of Naco, Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~46), and Cast Iron.
- nACo COATING - This coating, made of nACo, offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.24 x 0.24 x 2.99 Inches
See On Amazon #12
VEVOR 40pcs End Mills CNC Router Bits, 1/8" Shank, CNC Cutter Milling Carving Bit Set, Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, for Milling Machine
Asin: B0C9ZG75XQ | Model: 40PCSCNC | PartNumber: 40PCSCNC | Ean: 0840349927411 | UPC: 840349927411
Efficient Chip Removal: The 2-Flute Spiral Drill Bits Are Specifically Designed For Carving And Sculpting Curved Surfaces. Precision-Ground Spiral Flutes Facilitate Quick Chip Removal And Avoid Tool Sticking, Enhancing Your Work Efficiency..
High Compatibility: The Cnc Mill Kit Is Compatible With Most Engraving Machines, Precision Carving Machines, Cnc Machines, And Any Machine Equipped With A 1/8-Inch Collet..
Wear-Resistant Coatings: The Cnc Router Bit End Mill Features A High Hardness And Heat-Resistant Nano Blue Coating And Titanium Coating To Extend Service Life And Deliver Optimal Cutting Results. Ideal For Processing Materials Such As Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, And Aluminum Alloys..
Durable & Stable: Each Cnc Milling Bit Is Forged From Tungsten Steel Alloy, Ensuring Sharp Edges And A Smooth, Burr-Free Surface. They Exhibit High Wear Resistance And Durability, Providing You With Stable Milling Performance..
Features
- Cost-Effective Kit: The 1/8-inch shank CNC router bits set includes a combination of four types of cutting heads: 10 x spiral flat nose end mills, 10 x spiral ball nose end mills, 10 x nano blue coating end mills, and 10 x titanium coating end mills.
- Durable & Stable: Each CNC milling bit is forged from tungsten steel alloy, ensuring sharp edges and a smooth, burr-free surface. They exhibit high wear resistance and durability, providing you with stable milling performance.
- Efficient Chip Removal: The 2-flute spiral drill bits are specifically designed for carving and sculpting curved surfaces. Precision-ground spiral flutes facilitate quick chip removal and avoid tool sticking, enhancing your work efficiency.
- Wear-Resistant Coatings: The CNC router bit end mill features a high hardness and heat-resistant nano blue coating and titanium coating to extend service life and deliver optimal cutting results. Ideal for processing materials such as carbon steel, soft alloy steel, tool steel, cast iron, and aluminum alloys.
- High Compatibility: The CNC mill kit is compatible with most engraving machines, precision carving machines, CNC machines, and any machine equipped with a 1/8-inch collet.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #13
SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits
Asin: B0778F6KP8 | Model: R0.5-D1/4 FBA | PartNumber: R0.5-D1/4 FBA
Applicable Materials. Cnc Carving Bits, Suitable For 2D/3D Carving/Engraving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Router Bit With Ball End Perfect For Cnc Engraving Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Carbide Spiral Ball Nose Tapered Router Bit With 2-Flute, Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials..
Features
- SPECIFICATION. 2 flute, 0.5MM ball radius, 4.82deg single side angle, 1-1/4" CL, 1/4" shank, TiAIN Coated, 55HRC, can be used on routers with 1/4" collect;
- 2-FLUTE DESIGN. Carbide spiral ball nose tapered router bit with 2-flute, ball nose and spiral design, ensuring smooth and efficient cutting through various materials.
- APPLICABLE MATERIALS. CNC carving bits, suitable for 2D/3D carving/engraving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc router bit with ball end perfect for CNC engraving machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #14
BestParts High Performance 5Pcs Solid Carbide Ball Nose End Mill, AlTiN Coated, 2 Flute, 30 Degree Helix, 1/16" Cutting Diameter, 1/8" Shank Diameter, 1/4" Length of Cut, 1-1/2" Overall Length
Asin: B0C3HSTTBD
Material: Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures..
Application: Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials..
Features: Precision Ground Using The Highest Quality Grinding Wheels. High Strength And Hardness, Abrasion Resistant, Practical, Easy To Use And Durable In Use. Premium 10% Micrograin Carbide Perfect For Your General Purpose Or Difficult Application..
Coated: Altin Coated For Improved Performance And Tool Life In Harder Materials Or High Temperature Applications..
Features
- Size: 5pcs 1/16" cutting diameter x 1/8" shank diameter x 1/4" length of cut x 1-1/2" overall length, 2 Flute, 30 Helix, Solid Carbide End Mill, Ball Nose, AlTiN Coated.
- Coated: AlTiN Coated for improved performance and tool life in harder materials or high temperature applications.
- Material: Solid carbide tools offer long tool life and faster cutting speeds than other substrates, Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Features: Precision ground using the highest quality grinding wheels. High strength and hardness, abrasion resistant, practical, easy to use and durable in use. Premium 10% Micrograin Carbide perfect for your general purpose or difficult application.
- Application: Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials.
- See more on Amazon...
Brand: BestParts | Manufacturer: BestParts
See On Amazon #15
WEXWE Tools Ball Nose Carbide End Mill, MAH Coating, CNC Cutting Tools for Stainless Steel,Hardened Steels,High Temp Alloys,Medium Alloy Steels, 2 Flute,1/8" Shank,Inch Size (.125(1/8)", 5pcs)
Asin: B0C2C4H8VR
Material: Use Ultramicron Tungsten-Carbide Steel Matrix，Perfect Combination Of Toughness And Hardness，Improve Wear Resistance While Avoiding Breakage And Fracture.
Equipment: Manufactured With Five-Axis Precision Grinding Machine, Each Milling Bit Is Tested By Tool Testing Instruments，Good Stability Of Dimensional Accuracy.
Equipment: Manufactured With Five-Axis Precision Grinding Machine, Each Milling Bit Is Tested By Tool Testing Instruments，Good Stability Of Dimensional Accuracy.
The Core Diameter Is Design More Bigger To Get Stronger.
Features
- It is design for difficult cutting materials.Recommendation: high speed and low feed.Diameter tolerance 0 -0.02
- The core diameter is design more bigger to get stronger
- Material: Use ultramicron tungsten-carbide steel matrix Perfect combination of toughness and hardness Improve wear resistance while avoiding breakage and fracture
- Equipment: Manufactured with five-axis precision grinding machine, Each milling bit is tested by tool testing instruments Good stability of dimensional accuracy
- Equipment: Manufactured with five-axis precision grinding machine, Each milling bit is tested by tool testing instruments Good stability of dimensional accuracy
- See more on Amazon...
Brand: WEXWE | Manufacturer: WEXWE
See On Amazon #16
YG-1 - 52901 E5018 Carbide Ball Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080D4SMU | Model: 52901 | PartNumber: 52901
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #17
uxcell Ball Nose End Mill 0.5mm Tip Radius Solid Carbide AlTiSin Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC55 with 4mm Shank 50mm (2-inch) Length
Asin: B09T3DLBD2 | Model: a22010500ux0254 | PartNumber: a22010500ux0254
Wide Applications: Suitable For Milling And Cutting Of Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel Etc. For Slot And Hole Machining. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Ball End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. The Altisin Composite Coating Has High Hardness, High Wear Resistance And High Thermal Stability..
Solid Carbide Tool: M30 Carbide Ball Nose End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Ball Nose End Mill: Cutting radius: 0.5mm / 0.02"; cutting dia.: 1mm / 0.04"; cutting flute length: 2mm / 0.08"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC55.
- Solid Carbide Tool: M30 carbide ball nose end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for milling and cutting of carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel etc. For slot and hole machining. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Ball end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
YG-1 - 50558 E5014 Carbide Ball Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.25" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CVUVS | Model: 50558 | PartNumber: 50558
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for machining on hardened and high-alloy steel, steel casting, chill casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #19
40Pcs End Mills CNC Router Bits Set 1/8" Shank, Mcwdoit CNC Machine Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits
Asin: B07W5N72D4 | Model: HT001 | PartNumber: HT001 | Ean: 0725756324292 | UPC: 725756324292
【Advantage】Carbide Rods And Tungsten Steel Rods With High Hardness, High Wear Resistance, Clean Surface, Neat, No Glitches..
【Cnc Router Bits: Parameter】Overall Length（Oal）: 38Mm; Shank Diameter（Sd）: 3.175Mm.
【Wide Application】Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, Aluminum And Other Precision Parts Processing..
【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose End Mill 2-Flute, Nano Blue Coat And Titanium Coat Cnc Router Bits, Satisfying Your Different Needs..
Features
- High Quality CNC Bits Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
- Cost-Effective Kit 4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose End Mill 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs.
- Advantage Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches.
- Wide Application PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing.
- CNC Router Bits: Parameter Overall Length OAL : 38mm; Shank Diameter SD : 3.175mm
- See more on Amazon...
Brand: mcwdoit | Manufacturer: WAM Direct
Dimensions: 4.21 x 5.35 x 1.30 Inches | Weight: 0.38 pounds
See On Amazon #20
AllGIFT Ball Nose End Mill 1.5mm Tip Radius Solid Carbide AlTiSin Coated CNC Router Bits 2 Flute Spiral Milling Cutter(1mmx4mmx50mm)
Asin: B0D1KDXB83 | Ean: 0608951217616 | UPC: 608951217616
Key Features: This Tool Features A Ball End Cut And A 2-Flute Design. The Spiral Chip Space Design Allows For Fast And Clean Chip Removal, Ensuring Smooth And Precise Cutting. The Sharp Cutting Edge Enhances Cutting Performance..
High-Quality Construction: This Solid Carbide Tool Is Meticulously Crafted Using Premium Materials, Ensuring Durability And Longevity. It Is Designed To Withstand The Demands Of High-Speed Machining Operations While Delivering Consistent And Reliable Performance..
Pro Tips: For Optimal Results, It Is Recommended To Have A Longer Length Of The Tool Clamped By The Chuck. This Helps To Improve Stability And Precision During Machining Operations. It Is Also Important To Consider The Material Being Processed And Select An Appropriate Feed Rate And Cutting Speed To Achieve Better Processing Accuracy And Overall Performance..
Wide Range Of Applications: Suitable For Milling And Cutting Various Materials Including Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, And More. It Is Particularly Effective For Slot And Hole Machining Tasks. Compatible With Cnc Machining Centers, Engraving Machines, And Other High-Speed Cnc Machine Tools.
Features
- Solid Carbide Tool: This carbide end mill cutter is known for its high hardness, exceptional wear resistance, and excellent heat resistance. The carbide material ensures superior milling and cutting performance, resulting in high work efficiency.
- Wide Range of Applications: Suitable for milling and cutting various materials including carbon steel, malleable cast iron, alloy steel, stainless steel, and more. It is particularly effective for slot and hole machining tasks. Compatible with CNC machining centers, engraving machines, and other high-speed CNC machine tools
- Key Features: This tool features a ball end cut and a 2-flute design. The spiral chip space design allows for fast and clean chip removal, ensuring smooth and precise cutting. The sharp cutting edge enhances cutting performance.
- Pro Tips: For optimal results, it is recommended to have a longer length of the tool clamped by the chuck. This helps to improve stability and precision during machining operations. It is also important to consider the material being processed and select an appropriate feed rate and cutting speed to achieve better processing accuracy and overall performance.
- High-Quality Construction: This solid carbide tool is meticulously crafted using premium materials, ensuring durability and longevity. It is designed to withstand the demands of high-speed machining operations while delivering consistent and reliable performance.
- See more on Amazon...
Brand: AllGIFT | Manufacturer: AllGIFT
Amazon Price: $6.99 | as of 04/24/2024
(11:18pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon #21
Hunricho 2pcs HRC65 Tungsten Steel Ball Nose 2 Flutes Carbide End Mills with Nanco Blue Coating CNC Bits for Wood Plastic Steel Cut 3D Carving Engraving (D14)
Asin: B0D1TYT3FJ | Ean: 0742404555464 | UPC: 742404555464
Naco Blue Coated: Naco Blue Coating With Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Up To 2.5X Longer Life Compared To Uncoated Bits..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal,Steel ,Cast Iron, Plastics, Wood, , Etc....
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: The Down Cut Spiral Router Bit Is Made Of Solid Carbide. Solid Carbide Router Bit Has The Advantages Of High Hardness, Strong Wear Resistance,And Good Resistance To Bending. Has Excellent Cutting Performance, Improving Machining Efficiency..
Features
- SET OF 2 PCS ball nose end mills : Set includes 2 PCS down cut spiral router bits, Each router bit size : 25mm,shank diameter =14mm, cutting diameter =14mm, total length=100mm;
- Material: The down cut spiral router bit is made of solid carbide. Solid carbide router bit has the advantages of high hardness, strong wear resistance,and good resistance to bending. Has excellent cutting performance, improving machining efficiency.
- nACo BLUE COATED: nACo blue coating with heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Up to 2.5X longer life compared to uncoated bits.
- Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- Application: Can engrave PCB, CNC, Circuit boards, Metal,steel ,cast iron, Plastics, Wood, , etc...
- See more on Amazon...
Brand: Hunricho | Manufacturer: Hunricho
See On Amazon #22
MYS Cermet Ball Nose End Mill -2 Flute-2mm, 2.5mm, 3mmfor Drill Press & Milling Machine,CNC Router Bits Carbide Speed Square for Medium &Low-Carbon Steel High Speed Machine & More (R2.5-L50-D5)
Asin: B0CX5DLHRT | Model: TC | PartNumber: TC | Ean: 0732249837351 | UPC: 732249837351
✿ High-Performance Material - Made From Solid Cermet Which Is Very Sharp & Hard And Can Be Easier To Sharpen With No “Surface Coating” Which Is Different Like The Other Tungsten Steel One. The Processing Life Is 2 Times Better Than Normal Carbide Milling Cutters..
✿ Dcontact And Support - All Mys Products Are Managed In Accordance With Gb/T2331-2020/Iso 50001:2018, And We Provide A 12-Month Warranty For Milling Tools. If You Have Any Questions, Including Product After-Sales And Product Size Customization, Please Contact Us And We Will Reply To You Within 24 Hours (Excluding Weekends And Holidays)..
✿ High Processing Efficiency - Excellent High Accuracy With An Error Of ±0.02Mm, Which Can Make A Machined Surface Achieve A Mirror Effect. The Chamfer Design Facilitates Installation, And The Negative 20-Degree Spiral Chip Removal Groove Design Ensures Chip Removal Smoothly..
✿ Made Of Cermet - Which Do Have High Wear Resistance, Temperature Resistance And Toughness, Excellent Chemical Stability..
Features
- Application - The MYS cermet cutting tools are efficiently used for side milling, end milling and finishing, such as medium-low carbon steel, P20, 40CR, 45 steel, 4CR13, heat-resistant steel, cast iron, alloy steel, high-speed machining, soft and hard within HRC65 degrees universal.
- MADE OF CERMET - Which do have high wear resistance, temperature resistance and toughness, excellent chemical stability.
- HIGH-PERFORMANCE MATERIAL - Made from solid cermet which is very sharp & hard and can be easier to sharpen with no surface coating which is different like the other tungsten steel one. The processing life is 2 times better than normal carbide milling cutters.
- HIGH PROCESSING EFFICIENCY - Excellent high accuracy with an error of 0.02mm, which can make a machined surface achieve a mirror effect. The chamfer design facilitates installation, and the negative 20-degree spiral chip removal groove design ensures chip removal smoothly.
- DCONTACT and SUPPORT - All MYS products are managed in accordance with GB/T2331-2020/ISO 50001:2018, and we provide a 12-month warranty for milling tools. If you have any questions, including product after-sales and product size customization, please contact us and we will reply to you within 24 hours (excluding weekends and holidays).
- See more on Amazon...
Brand: MYS | Manufacturer: MYS
Weight: 0.02 pounds
See On Amazon #23
MYS Cermet Ball Nose End Mill -2 Flute-0.5mm, 0.75mm, 1.25mm, 1mm, 1.5mm for Drill Press & Milling Machine,CNC Router Bits Carbide Speed Square for Medium &Low-Carbon Steel (R1-L50-D4)
Asin: B0CX5F1588 | Model: TC | PartNumber: TC | Ean: 0732249837337 | UPC: 732249837337
✿ High-Performance Material - Made From Solid Cermet Which Is Very Sharp & Hard And Can Be Easier To Sharpen With No “Surface Coating” Which Is Different Like The Other Tungsten Steel One. The Processing Life Is 2 Times Better Than Normal Carbide Milling Cutters..
✿ Dcontact And Support - All Mys Products Are Managed In Accordance With Gb/T2331-2020/Iso 50001:2018, And We Provide A 12-Month Warranty For Milling Tools. If You Have Any Questions, Including Product After-Sales And Product Size Customization, Please Contact Us And We Will Reply To You Within 24 Hours (Excluding Weekends And Holidays)..
✿ High Processing Efficiency - Excellent High Accuracy With An Error Of ±0.02Mm, Which Can Make A Machined Surface Achieve A Mirror Effect. The Chamfer Design Facilitates Installation, And The Negative 20-Degree Spiral Chip Removal Groove Design Ensures Chip Removal Smoothly..
✿ Made Of Cermet - Which Do Have High Wear Resistance, Temperature Resistance And Toughness, Excellent Chemical Stability..
Features
- Application - The MYS cermet cutting tools are efficiently used for side milling, end milling and finishing, such as medium-low carbon steel, P20, 40CR, 45 steel, 4CR13, heat-resistant steel, cast iron, alloy steel, high-speed machining, soft and hard within HRC65 degrees universal.
- MADE OF CERMET - Which do have high wear resistance, temperature resistance and toughness, excellent chemical stability.
- HIGH-PERFORMANCE MATERIAL - Made from solid cermet which is very sharp & hard and can be easier to sharpen with no surface coating which is different like the other tungsten steel one. The processing life is 2 times better than normal carbide milling cutters.
- HIGH PROCESSING EFFICIENCY - Excellent high accuracy with an error of 0.02mm, which can make a machined surface achieve a mirror effect. The chamfer design facilitates installation, and the negative 20-degree spiral chip removal groove design ensures chip removal smoothly.
- DCONTACT and SUPPORT - All MYS products are managed in accordance with GB/T2331-2020/ISO 50001:2018, and we provide a 12-month warranty for milling tools. If you have any questions, including product after-sales and product size customization, please contact us and we will reply to you within 24 hours (excluding weekends and holidays).
- See more on Amazon...
Brand: MYS | Manufacturer: MYS
Weight: 0.02 pounds
See On Amazon #24
zouzmin 5pcs 0.15mm-0.4mm Tungsten Steel Ball Nose 2 Flutes End Mills Micro-Diameter Carbide End Mill High Precision Engraving Milling Cutter CNC Router Bits for PCB Machine Aluminum (R0.25x3xD4x50)
Asin: B0D1VC3ZY4 | Ean: 0797999682590 | UPC: 797999682590
3.Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
5.Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Copper, Magnesium Alloy And Aluminium , Etc....
4.Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
2.Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- 1.Dimensions: 50mm/1.97 overallength, 4mm/0.16 shank diameter , the cutting edge length from 2mm(0.07 ) to 10mm(0.4 ), and the cutting edge diameter from 0.15mm(0.006 ) to 0.45mm(0.017 )
- 2.Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- 3.Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- 4.Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- 5.Application: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, Copper, Magnesium alloy and Aluminium , etc...
- See more on Amazon...
Brand: zouzmin | Manufacturer: zouzmin
See On Amazon #25
zouzmin 3pcs HRC65 Tungsten Steel Ball Nose 2 Flutes Carbide End Mills with Nanco Blue Coating CNC Bits for Wood Plastic Steel Cut 3D Carving Engraving (Tip 4mm)
Asin: B0D1VH421T | Ean: 0797999682873 | UPC: 797999682873
3.Naco Blue Coated: Naco Blue Coating With Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Up To 2.5X Longer Life Compared To Uncoated Bits..
5.Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal,Steel ,Cast Iron, Plastics, Wood, , Etc....
4.Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
2.Material: The Down Cut Spiral Router Bit Is Made Of Solid Carbide. Solid Carbide Router Bit Has The Advantages Of High Hardness, Strong Wear Resistance,And Good Resistance To Bending. Has Excellent Cutting Performance, Improving Machining Efficiency..
Features
- 1.SET OF 5 PCS ball nose end mills : Set includes 5 PCS down cut spiral router bits, Each router bit size : shank diameter =4mm, cutting diameter =1mm, total length=50mm;
- 2.Material: The down cut spiral router bit is made of solid carbide. Solid carbide router bit has the advantages of high hardness, strong wear resistance,and good resistance to bending. Has excellent cutting performance, improving machining efficiency.
- 3.Naco BLUE COATED: nACo blue coating with heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Up to 2.5X longer life compared to uncoated bits.
- 4.Characteristics: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- 5.Application: Can engrave PCB, CNC, Circuit boards, Metal,steel ,cast iron, Plastics, Wood, , etc...
- See more on Amazon...
Brand: zouzmin | Manufacturer: zouzmin
See On Amazon #26
1pcs 2-Flute Tapered Ball Nose Spiral End Mill, 3.175mm 4mm 6mm 8mm Shank Carbide CNC Router Bits R0.25-R2.0 Wood Metal Carving Milling Cutter (Size : R0.25X20XD6X50L)
Asin: B0D1PPFTGG | Model: GSIVCIOA | PartNumber: GSIVCIOA | Ean: 9322357249439
Its Sharp Edge And Appropriate Hardness Allow It To Maintain Efficient Cutting During Machining While Reducing Tool Wear..
Suitable For Machining A Wide Range Of Materials Such As Carbon Steel, Stainless Steel, Cast Iron, Acrylic And Abs Plastic..
The Service Life Of The 2-Flute Tapered Ball End Mill Has Been Significantly Improved By Optimizing The Tool Material And Heat Treatment Process. Its Wear And Impact Resistance Enables The Tool To Maintain Stable Cutting Performance Over A Long Period Of Time..
Its Tapered Ball Head Design Allows The Tool To Perform Precise Machining On Complex Curved Surfaces And Inclined Angles While Maintaining Cutting Forces..
Features
- With a unique double-edged design, it provides excellent cutting performance and stability.
- Its tapered ball head design allows the tool to perform precise machining on complex curved surfaces and inclined angles while maintaining cutting forces.
- Its sharp edge and appropriate hardness allow it to maintain efficient cutting during machining while reducing tool wear.
- The service life of the 2-flute tapered ball end mill has been significantly improved by optimizing the tool material and heat treatment process. Its wear and impact resistance enables the tool to maintain stable cutting performance over a long period of time.
- Suitable for machining a wide range of materials such as carbon steel, stainless steel, cast iron, acrylic and ABS plastic.
- See more on Amazon...
Brand: GSIVCIOA | Manufacturer: GSIVCIOA
Weight: 0.11 Pounds
See On Amazon #27
1pcs Tapered Spiral Ball Nose End Mill R0.25-R2.0 Tungsten Carbide End Mill 2-Flute CNC Router Bits for Wood Metal 2D and 3D Engraving Carving (Size : R0.5x30.5xD6x75)
Asin: B0D1QH5NJG | Model: GSIVCIOA | PartNumber: GSIVCIOA | Ean: 9322357249071
Its Sharp Edge And Appropriate Hardness Allow It To Maintain Efficient Cutting During Machining While Reducing Tool Wear..
Suitable For Machining A Wide Range Of Materials Such As Carbon Steel, Stainless Steel, Cast Iron, Acrylic And Abs Plastic..
The Service Life Of The 2-Flute Tapered Ball End Mill Has Been Significantly Improved By Optimizing The Tool Material And Heat Treatment Process. Its Wear And Impact Resistance Enables The Tool To Maintain Stable Cutting Performance Over A Long Period Of Time..
Its Tapered Ball Head Design Allows The Tool To Perform Precise Machining On Complex Curved Surfaces And Inclined Angles While Maintaining Cutting Forces..
Features
- With a unique double-edged design, it provides excellent cutting performance and stability.
- Its tapered ball head design allows the tool to perform precise machining on complex curved surfaces and inclined angles while maintaining cutting forces.
- Its sharp edge and appropriate hardness allow it to maintain efficient cutting during machining while reducing tool wear.
- The service life of the 2-flute tapered ball end mill has been significantly improved by optimizing the tool material and heat treatment process. Its wear and impact resistance enables the tool to maintain stable cutting performance over a long period of time.
- Suitable for machining a wide range of materials such as carbon steel, stainless steel, cast iron, acrylic and ABS plastic.
- See more on Amazon...
Brand: GSIVCIOA | Manufacturer: GSIVCIOA
Weight: 0.11 pounds
See On Amazon #28
1pcs Carbide Ball Nose Router Bit CNC End Mill, R0.25-R2.0 Tapered Ball Nose End Mill 2 Flute Spiral Milling Cutter for Carving Engraving (Size : R0.5X20XD6X50L)
Asin: B0D1PN4TW2 | Model: GSIVCIOA | PartNumber: GSIVCIOA | Ean: 9322357248586
Its Sharp Edge And Appropriate Hardness Allow It To Maintain Efficient Cutting During Machining While Reducing Tool Wear..
Suitable For Machining A Wide Range Of Materials Such As Carbon Steel, Stainless Steel, Cast Iron, Acrylic And Abs Plastic..
The Service Life Of The 2-Flute Tapered Ball End Mill Has Been Significantly Improved By Optimizing The Tool Material And Heat Treatment Process. Its Wear And Impact Resistance Enables The Tool To Maintain Stable Cutting Performance Over A Long Period Of Time..
Its Tapered Ball Head Design Allows The Tool To Perform Precise Machining On Complex Curved Surfaces And Inclined Angles While Maintaining Cutting Forces..
Features
- With a unique double-edged design, it provides excellent cutting performance and stability.
- Its tapered ball head design allows the tool to perform precise machining on complex curved surfaces and inclined angles while maintaining cutting forces.
- Its sharp edge and appropriate hardness allow it to maintain efficient cutting during machining while reducing tool wear.
- The service life of the 2-flute tapered ball end mill has been significantly improved by optimizing the tool material and heat treatment process. Its wear and impact resistance enables the tool to maintain stable cutting performance over a long period of time.
- Suitable for machining a wide range of materials such as carbon steel, stainless steel, cast iron, acrylic and ABS plastic.
- See more on Amazon...
Brand: GSIVCIOA | Manufacturer: GSIVCIOA
Weight: 0.11 pounds
See On Amazon #29
SPEED TIGER Carbide Tapered End Mill - ITBTA CNC Carving Bits, Ball Tip R0.75, 1/4"Shank 3"OVL - for Metal, Steel, and Wood - Professional Mill Bits Sets
Asin: B09WV2T9CB | Model: ITBTA0750436 | PartNumber: ITBTA0750436
✅ High-Performance Material - This End Mill Is Made From Micrograin Carbide, Which Gives It Exceptional Toughness, Durability, And Machinability. It Performs Brilliantly And Is An Excellent Value For Its Price..
✅ Dedicated Support - Please Don't Hesitate To Contact Us On Amazon If You Need The Cutting Condition Data. We Want To Ensure You Receive The Best Product That Meets Your Requirements..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ Naco Coating - This Coating, Made Of Naco, Offers Exceptional Stability At High Temperatures And Surpasses The Heat Resistance Of Tialn, Tin, Or Ticn Coatings..
Features
- APPLICATION - Our carbide tools are highly effective at machining various types of steel such as Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~47), and Cast Iron.
- nACo COATING - This coating, made of nACo, offers exceptional stability at high temperatures and surpasses the heat resistance of TiAlN, TiN, or TiCN coatings.
- HIGH-PERFORMANCE MATERIAL - This end mill is made from micrograin carbide, which gives it exceptional toughness, durability, and machinability. It performs brilliantly and is an excellent value for its price.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Please don't hesitate to contact us on Amazon if you need the Cutting Condition Data. We want to ensure you receive the best product that meets your requirements.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.24 x 0.24 x 2.99 inches
See On Amazon #30
Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool
Asin: B07X8VCVL7 | Ean: 8011579933448
Detail Design: Cutting Edge With Suitable Negative Forefoot Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. At The Same Time, The Large Core Diameter Is Used To Enhance The Rigidity Of The Tool And Make The Cutting And Chip Removal Stable..
Package Included：6 Carbide Metric End Mill Cutter.
Wide Application Cnc End Mill：It Can Be Used On Many Fields, Such As Metal Processing, Cnc Machining And Engineering Using. Large Chip Flute Design For Smoother Chip Removal, Making The Workpiece Smoother And Brighter..
Material: Tungsten Steel Carbide Has The Advantages Of Wear Resistance, Toughness And Corrosion Resistance. It Also Has Stronger Heat Resistance Than Hss, So It Can Maintain Hardness Tungsten Steel Is Mainly Composed Of Tungsten Carbide And Cobalt, Accounting For 99% Of All Components. Tungsten Steel Is Also Called Cemented Carbide And Is Considered To Be The Teeth Of Modern Industry..
Features
- Carbide Metric End Mill Set: This end mill set includes 6 diameter sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.
- Material: Tungsten steel Carbide has the advantages of wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry.
- Detail design: cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable.
- Wide Application CNC End Mill It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter.
- Package Included 6 carbide metric End Mill Cutter
- See more on Amazon...
Brand: Home of quality tools | Manufacturer: Home of quality tools
See On Amazon
Looking For Something Else?
Search