Best router spiral bits - Buying Guide
Last Updated: 04/17/2024
Share on
Bestselling router spiral bits on Amazon
- Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral wit...
- 10pcs 0.8-3mm Titanium Coated Engraving Milling Cutter Carbide Bits, 1/8'' Shank for Dremel Rotary T...
- SPEED TIGER Carbide Spiral Router Bits Up Cut - ISEU1/4 Diameter, 1 Cutting Length, 2-1/2"OVL (1 P...
- HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcu...
- EANOSIC Solid Carbide Single Flute End Mill 1/4 Shank, Upcut CNC Spiral Router Bit O Flute Milling ...
- Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8" Shank Spiral Flute CNC Router Bits for Print Ci...
- POWERTEC Solid Carbide Downcut Spiral Router Bits 1/4 Shank with Router Bushing, Collar & Alignment ...
- SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank
- SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Leng...
- Genmitsu 50pcs Tungsten Carbide End Mill Router Bits, 1/8'' Shank CNC Bit Set Including 2-Flute Stra...
#1
Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4" Shank Down-Cut)
Asin: B09N9QBGBS | Model: E108 | PartNumber: E108
Up To 2.5X Longer Life Compared To Uncoated Bits..
The Downcut Spiral Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The 1/4-Inch Downcut Spiral Flush Trim Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp..
Industrial Quality Down-Cut Flush Trim Router Bit: Made Of Solid Virgin Carbide With Blue Nano Naco Coated. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality..
Features
- Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4 Shank, 1 Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
- Industrial Quality Down-cut Flush Trim Router Bit: Made of solid VIRGIN carbide with blue nano nACo coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Up to 2.5X longer life compared to uncoated bits.
- The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- The downcut spiral router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #2
10pcs 0.8-3mm Titanium Coated Engraving Milling Cutter Carbide Bits, 1/8'' Shank for Dremel Rotary Tools by YEEZUGO
Asin: B07GZLX45X | Ean: 0676422101245 | UPC: 676422101245
Coated With Titanium Improves The Speed And Feed Rate Of The Tool, And Also Improve The Surface Wear Resistance..
Overall Length: 37Mm,Shank Diameter: 3.175Mm.
Range Of Processing: Pcb, Smt, The Cnc, Mold, Plastic, Copper, Stainless Steel And Other Precision Metal Parts Processing..
Carbide Rods And Tungsten Steel Rods, With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment And Long Tool Life..
Features
- These carbide end mills are Made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance.
- Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life.
- Coated with titanium Improves the speed and feed rate of the tool, and also Improve the surface wear resistance.
- Range of processing: PCB, SMT, the CNC, mold, plastic, copper, stainless steel and other precision metal parts processing.
- Overall Length: 37mm,Shank Diameter: 3.175mm
- See more on Amazon...
Brand: YEEZUGO | Manufacturer: Lukcase
See On Amazon #3
SPEED TIGER Carbide Spiral Router Bits Up Cut - ISEU1/4 Diameter, 1 Cutting Length, 2-1/2"OVL (1 Piece, 1/4") - for Wood, Oak, MDF, Aluminum Mill Bits Sets for DIYers & Professionals
Asin: B09DYC67MN | Model: ISEU1-4-2 | PartNumber: ISEU1-4-2
✅ Multi-Size - Our Products Offer Mill Bits Of Varying Sizes (1/2", 1/4", And 3/9") To Enhance Your Project's Efficiency, Regardless Of Its Nature..
✅ Dedicated Support - Feel Free To Reach Out To Us Via Amazon For The Cutting Condition Data, Ensuring You Get The Most Suitable Product For Your Needs..
✅ Fine Workmanship - Our Products Deliver Outstanding High Accuracy With An Error Of -0.02Mm, Empowering Users To Achieve Professional Cutting Quality Effortlessly..
✅ High-Performance Material - Crafted From Micrograin Carbide, This End Mill Offers Exceptional Toughness, Durability, And Machinability, Delivering Outstanding Performance And Great Value For Its Price..
Features
- APPLICATION - Our carbide tools are highly effective for working with Wood, Aluminum, Copper, MDF, Carbon Steels (~HB225), Alloy Steels (HB225~325), Pre-hardened Steels (up to HRC45), Hardened Steels (HRC40~45), and Cast Iron.
- HIGH-PERFORMANCE MATERIAL - Crafted from micrograin carbide, this end mill offers exceptional toughness, durability, and machinability, delivering outstanding performance and great value for its price.
- MULTI-SIZE - Our products offer mill bits of varying sizes (1/2, 1/4, and 3/9) to enhance your project's efficiency, regardless of its nature.
- FINE WORKMANSHIP - Our products deliver outstanding high accuracy with an error of -0.02mm, empowering users to achieve professional cutting quality effortlessly.
- DEDICATED SUPPORT - Feel free to reach out to us via Amazon for the Cutting Condition Data, ensuring you get the most suitable product for your needs.
- See more on Amazon...
Brand: SPEED TIGER | Manufacturer: SPEED TIGER
Dimensions: 0.24 x 0.24 x 2.52 inches
See On Amazon #4
HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs (3.175 mm)
Asin: B010NI39WO | Ean: 0602815418874, 0785479493262, 0723434395534, 7535001526752 | UPC: 723434395534, 785479493262, 602815418874
High Efficiency: These Bits Own Sharp Edge Which Is Able For Fast Engraving That Makes High Efficiency, Durable, High Precision And Not Easy To Break. It Is Smokeless And Burr-Free While Processing.
Package Contents: 10Pcs Solid Carbide Spiral Upcut Bits Assorted In Storage Case.
Perfect Cutting: The Design Of Flutes, Larger Spiral Chip Space Of Cnc Router Bit Makes Non-Stick Crumbs, Smooth Cutting And Fast Chip-Removal.
Dimensions: Shank Dia=1/8" (3.175Mm). Cutting Edge Diameter=1/8" (3.175Mm). Cutting Edge Length/Flute Length=17Mm. Overall Length=38.5Mm.
Features
- RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc
- DIMENSIONS: Shank Dia=1/8 (3.175mm). Cutting edge diameter=1/8 (3.175mm). Cutting edge length/flute length=17mm. Overall length=38.5mm
- HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing
- PERFECT CUTTING: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
- PACKAGE CONTENTS: 10pcs solid carbide spiral upcut bits assorted in storage case
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #5
EANOSIC Solid Carbide Single Flute End Mill 1/4 Shank, Upcut CNC Spiral Router Bit O Flute Milling Cutter for Aluminum Plastic Acrylic PVC MDF
Asin: B0C621DPC6
The Cnc Bit Is Used For Carving, Cutting, Slotting, Milling, Hollow Cutting In Aluminium , Copper , Brass, Plastics (Abs, Acrylic, Hdpe ) And Aluminium Composite.
We Provide 100% Satisfactory Customer Service To Our Customers. Any Questions, Please Feel Free To Contact Us..
The 1 Flute Router Bit Has The Best Chip Ejection And Heat Dissipation Which Avoids Jamming Due To The Gummy Nature Of Soft Materials,Ensure Smooth Cutting.
Solid Carbide And Nano Blue Coated: The Single Flute Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- INDUSTRIAL GRADE Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1 inch Cutting Length, 2-1/2 inch for Total Length. Up Cut, Flat Top with Single Flute.
- SOLID CARBIDE AND NANO BLUE COATED: The Single Flute Router Bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- The CNC bit is used for Carving, Cutting, Slotting, Milling, Hollow Cutting in Aluminium , Copper , Brass, Plastics (ABS, acrylic, HDPE ) and Aluminium Composite
- The 1 flute router bit has the best chip ejection and heat dissipation which avoids jamming due to the gummy nature of soft materials,ensure smooth cutting
- We provide 100% satisfactory customer service to our customers. Any questions, please feel free to contact us.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #6
Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8" Shank Spiral Flute CNC Router Bits for Print Circuit Board Jewelry CNC Engraving, PD30A
Asin: B08M5PLF48 | Model: 101-61S-PD30A | PartNumber: 101-61S-PD30A | Ean: 4897093845375
Advantage: With Spiral Flute Cutting Edge, These Pcb Drill Bits Can Reduce Cutting Force And Prevent The Drill From Broken And Improve Accuracy. They Work Quickly And Cleanly, With No Glitches Or Scrap Left..
30-Piece Combo Set: There Are 3 Sets Of Drill Bits (Set A: 0.1Mm-1.0Mm; Set B: 1.1Mm-2.0Mm; Set C: 2.1Mm-3.0Mm), Each Of 10 Pieces, And Each Set Has A Protective Box. It's Easy To Store And Carry..
Application: Suitable For Amber Beeswax, Printed Circuit Boards, 3D Printer Nozzle Cleaning, Plexiglass, Bakelite, Cnc Engraving, Jewelry, Plastic, And Other Precise Drilling. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Various Sizes: 1/8'' Shank; Bits Diameter: 0.1Mm, 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.7Mm, 0.8Mm, 0.9Mm, 1.0Mm, 1.1Mm, 1.2Mm, 1.3Mm, 1.4Mm, 1.5M, 1.6Mm, 1.7Mm, 1.8Mm, 1.9Mm, 2.0Mm, 2.1Mm, 2.2Mm, 2.3Mm, 2.4Mm, 2.5Mm, 2.6Mm, 2.7Mm, 2.8Mm, 2.9Mm, 3.0Mm. This Set Contains 30 Different Size Drill Bits Diameter, Each Size Having1 Pcs..
Features
- High Quality: The PCB drill bits set are made of high-quality tungsten carbide steel alloy, which is high wear resistance, high hardness, anti-impairment. Seismic design on the blade edge enables it to stay stable during engraving.
- Various Sizes: 1/8'' shank; bits diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5m, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm. This Set contains 30 different size drill bits diameter, each size having1 pcs.
- Advantage: With spiral flute cutting edge, these PCB drill bits can reduce cutting force and prevent the drill from broken and improve accuracy. They work quickly and cleanly, with no glitches or scrap left.
- Application: Suitable for amber beeswax, printed circuit boards, 3D printer nozzle cleaning, plexiglass, bakelite, CNC engraving, jewelry, plastic, and other precise drilling. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- 30-piece Combo Set: There are 3 sets of drill bits (Set A: 0.1mm-1.0mm; Set B: 1.1mm-2.0mm; Set C: 2.1mm-3.0mm), each of 10 pieces, and each set has a protective box. It's easy to store and carry.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #7
POWERTEC Solid Carbide Downcut Spiral Router Bits 1/4 Shank with Router Bushing, Collar & Alignment Pin for use w/ 1/4 Router Templates. Includes 1/8 Router Bits for Wood PVC MDF Hardwood (71333)
Asin: B07SJS2XXJ | Model: 71333 | PartNumber: 71333 | Ean: 0843441103004 | UPC: 843441103004
Features: Centering Pin Allows For Dependable And Precise Alignment To Your Router's Spindle - Super Strong Carbide 1/8 Router Bit Ensures A Sharp And Accurate Cut.
High Quality Build: Precision Ground To Ensure Perfect And Precise Cuts - With Great Fit And Finish - Pro Industry Grade Materials For Dependable Excellence - Each Component Is Individually Tested For Perfect Balance.
Compatibility: Works With Most All Standard Routers - An Adaptor Plate May Be Necessary For Use With Some Routers; Please Check The Specification For Your Make And Model To Ensure Compatibility.
Function: For Precision Routing Applications With Your 1/4 Router Templates - Create Repeatable, Flawless Inlays And Matching Cutouts - Great For Repairs And Decorative Purposes.
Features
- INCLUDES: (1) 1/8" solid carbide spiral router bit with 1/4" shank (1) brass inlay bushing with retaining nut (1) snap-on brass collar (1) handy alignment pin
- FUNCTION: For precision routing applications with your 1/4 router templates - create repeatable, flawless inlays and matching cutouts - great for repairs and decorative purposes
- FEATURES: Centering Pin allows for dependable and precise alignment to your router's spindle - super strong carbide 1/8 router bit ensures a sharp and accurate cut
- COMPATIBILITY: Works with most all standard routers - an adaptor plate may be necessary for use with some routers; please check the specification for your make and model to ensure compatibility
- HIGH QUALITY BUILD: Precision ground to ensure perfect and precise cuts - with great fit and finish - pro industry grade materials for dependable excellence - Each component is individually tested for perfect balance
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 0.75 x 5.50 x 3.20 inches | Weight: 0.21 Pounds
See On Amazon #8
SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank
Asin: B07P7LGQJ6 | Ean: 4897093841353
➤Material: Using Ultra-Fine Grained Carbide Material, With Good Milling And Cutting Performance..
➤Genmitsu Cnc Bits Selection Guide: To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
➤Application: Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, And Other Precision Parts Processing..
: ➤Advantage: With Sufficient Flexural Strength And Wear Resistance, Which Ensure High Work Efficiency. Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Features
- Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs.
- : Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: SainSmart | Manufacturer: Genmitsu
Weight: 0.00 Pounds
See On Amazon #9
SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool
Asin: B09M6T9221 | Model: SPXL-1/4-1/4-U | PartNumber: SPXL-1/4-1/4-U
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #10
Genmitsu 50pcs Tungsten Carbide End Mill Router Bits, 1/8'' Shank CNC Bit Set Including 2-Flute Straight Bit, Flat Nose & Ball Nose End Mill, PCB Drill & V-Groove Engraving Bits, Nano Blue Coat, MC50A
Asin: B09XMTKRL5 | Ean: 0816550025697 | UPC: 816550025697
Rich Sizes For Choose: 2-Flute Flat Nose & Ball Nose End Mills, 2-Flute Straight Router Bits, And Nano Blue Coating End Mills -- Cutting Diameter: (1-3.175Mm). Pcb Drill Bits -- Cutting Diameter: (1.1-2.0Mm)..
Wide Compatibility: The Mc50a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, Proverxl 4030, 3020-Pro Max, As Well As Other Industrial Cnc Machines. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Applicable Materials: Suitable For Such As Mdf, Pvc, Pcb, Acrylic, Wood, Solid Wood, Nylon, Resin, Plywood, Carbon Fiber, Amber Beeswax, Etc. Widely Used For 3D Relief Sculpting/2D Lettering/Cutting/Grooving/Slotting/Drilling/Hollowing/Positioning/Roughing/Milling..
Mixed Router Bit Set: 6 Kinds Of Bits In This Router Set, Which Include 10Pcs 2-Flute Flat Nose End Mills, 10Pcs 2-Flute Ball Nose End Mills, 10Pcs Nano Blue Coating End Mills, 10Pcs Pcb Drill Bits, 5Pcs V-Groove Engraving Bits, 5Pcs 2-Flute Straight Router Bits..
Features
- High Quality: Made of Tungsten Carbide Steel Alloy, which is high wear resistance and anti-impairment. Moreover, its Nano Blue Coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
- Mixed Router Bit Set: 6 kinds of bits in this router set, which include 10pcs 2-Flute Flat Nose End Mills, 10pcs 2-Flute Ball Nose End Mills, 10pcs Nano Blue Coating End Mills, 10pcs PCB Drill Bits, 5pcs V-Groove Engraving Bits, 5pcs 2-Flute Straight Router Bits.
- Rich Sizes for Choose: 2-Flute Flat Nose & Ball Nose End Mills, 2-Flute Straight Router Bits, and Nano Blue Coating End Mills -- Cutting Diameter: (1-3.175mm). PCB Drill Bits -- Cutting Diameter: (1.1-2.0mm).
- Applicable Materials: Suitable for such as MDF, PVC, PCB, Acrylic, wood, solid wood, Nylon, Resin, plywood, carbon fiber, amber beeswax, etc. Widely used for 3D relief sculpting/2D lettering/cutting/grooving/slotting/drilling/hollowing/positioning/roughing/milling.
- Wide Compatibility: The MC50A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, PROVerXL 4030, 3020-PRO MAX, as well as other industrial CNC machines. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #11
Up Down Compression Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits CNC Spiral Bit with Nano Coating by EANOSIC
Asin: B0BPS4XMXW | Model: E210 | PartNumber: E210
Up To 2.5X Longer Life Compared To Uncoated Bits. The Flush-Trim Spiral Router Bits Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits..
The Spiral Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The 1/4-Inch Up And Down Cut Spiral Flush Trim Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp..
Industrial Quality Spiral Flush Trim Router Bit: Made Of Solid Virgin Carbide With Nano Blue Coating. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality..
Features
- Professional Compression Flush Trim Router Bit with Bottom Bearing: 1/4 Shank, 1 Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
- INDUSTRIAL QUALITY SPIRAL FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coating. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Up to 2.5X longer life compared to uncoated bits. The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.
- The 1/4-Inch up and down cut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- The spiral router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #12
EANOSIC Downcut Spiral Router Bits 1/4 inch Shank, 1/4 inch Cutting Diameter Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving
Asin: B0B5MM5B6T | Model: E203 | PartNumber: E203
Cnc Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Top, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Down-Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches. Up To 2.5X Longer Life Compared To Uncoated Bits..
Features
- Downcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
- SOLID CARBIDE AND NANO BLUE COATED: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.
- CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #13
EANOSIC Compression Spiral Router Bits 1/4" Shank,1-1/4" Cutting Length, Extra Long 3 Inch, Carbide UP Down Cut CNC Router Bits End Mill for Wood Mortises Carving Engraving
Asin: B0BXSGFX68 | Model: E220 | PartNumber: E220
Cnc Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut And Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Up And Down Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length (Extra Long)
- SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- CNC spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #14
SpeTool Carbide Spiral Router Bits Up&Down Compression Bit 1/4 X 1 inch Cutting Size with 1/4 inch Shank for Woodwork CNC Router Bit Engraving Carving Mortise Groove Tools
Asin: B086L6MYJ4 | Model: SP-D1/4-1/4-U&D | PartNumber: SP-D1/4-1/4-U&D
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #15
CNC Router Bits 1/8" Shank CNC Bit End Mill 1/16" Cutting Dia Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood (1/16 in, 10)
Asin: B0CKVBMSPT | Ean: 0768399607865 | UPC: 768399607865
High Efficiency: These Bits Own Sharp Edge Which Is Able For Fast Engraving That Makes High Efficiency, Durable, High Precision And Not Easy To Break. It Is Smokeless And Burr-Free While Processing.
Package Contents: 10Pcs Solid Carbide Spiral Upcut Bits Assorted In Storage Case.
Perfect Cutting: The Design Of Flutes, Larger Spiral Chip Space Of Cnc Router Bit Makes Non-Stick Crumbs, Smooth Cutting And Fast Chip-Removal.
Dimensions: Shank Dia=1/8" (3.175Mm). Cutting Edge Diameter=1/16" (1.5Mm). Cutting Edge Length/Flute Length=1/2" (12Mm). Overall Length=1-1/2"(38.5Mm).
Features
- RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc
- DIMENSIONS: Shank Dia=1/8 (3.175mm). Cutting edge diameter=1/16 (1.5mm). Cutting edge length/flute length=1/2 (12mm). Overall length=1-1/2(38.5mm)
- HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing
- PERFECT CUTTING: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
- PACKAGE CONTENTS: 10pcs solid carbide spiral upcut bits assorted in storage case
- See more on Amazon...
Brand: HOZLY | Manufacturer: HOZLY
See On Amazon #16
SpeTool Carbide O Flute Spiral Router Bit 1/8 Inch Cutting Diameter 1/4 Inch Shank with Coating Acrylic Non-Ferrous Metal CNC Milling Cutter
Asin: B0BN5RWQ75 | Model: SP1F-D1/8-SPE-X | PartNumber: SP1F-D1/8-SPE-X
Unique Design. O-Flute Design Spiral Router Bit Ensures Efficient Chip Removal, Reducing Clogging, Providing Smooth Cutting Performance, And Extending Tool Life;.
Wide Application. Perfect For Cnc Routing, Hobbyist Projects, And Sign Making With Plastic And Non-Ferrous Materials..
Durable And Precise. Single Flute Router Bits, High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Applicable Matiarials. Suitable For A Variety Of Materials, Acrylic, Plastic, Aluminum, Copper, And Wood; Used For Carving, Cutting, Slotting, Milling, Hollow Cutting;.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable.
Features
- SPECIFICATION. Spiral Router Bits 3/4" cutting length; 1/8" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect;
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable
- UNIQUE DESIGN. O-Flute design spiral router bit ensures efficient chip removal, reducing clogging, providing smooth cutting performance, and extending tool life;
- APPLICABLE MATIARIALS. Suitable for a variety of materials, acrylic, plastic, aluminum, copper, and wood; Used for Carving, Cutting, Slotting, Milling, Hollow Cutting;
- WIDE APPLICATION. Perfect for CNC routing, hobbyist projects, and sign making with plastic and non-ferrous materials.
- DURABLE AND PRECISE. Single flute router bits, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #17
Turnextte 30 Degree V-Groove Engraving Bit, Carbide CNC Chamfer End Mill 3 Flutes 1/4 inch Cutting Diameter and 1/4 inch Shank with Nano Blue Coated Carbide End Mill for Carving Engraving
Asin: B0CLCGVVCB
Widely Application:Spiral Router Bit Can Be Used With Handheld, Table-Mounted Portable Routers, And As Cnc Machine Router Bits. For Cutting Plywood, Oak, Mdf, And Any Hardwood Working And Keep Sharp After Multiple Uses..
Service First:We Trust In Delivering High-Quality Products To The End-User. Customer Satisfaction Is The Lifeline Of Our Brand.If You Have Any Questions About The Product, Please Contact Us. Your Problem Will Be Resolved Within 24 Hours..
Adopt Ultra-Fine Material:Special Unique Carbide For Longer Lifetime In Abrasive Material. Designed For Cnc Applications Requiring High Feed Rates And A Clean Finish. New Version Of The Bit Body And Chip Removal Groove Design Achieve Excellent Chip Removal And Cutting..
Advanced Naco Coating: Turnextte Spiral Router Bits Are Coated With Naco, Which Has 4600Hv Nano Hardness, 1200℃ Max. Service Temperature, 0.4Μ Coefficient Of Friction. Brings You A Triple Experience From Other Cnc Spiral Router Bit..
Features
- SIZE DESCRIPTION:V-Groove Engraving Bit: (a )30 Angle, (D) 1/4 inch Cutting Diameter, (B) 27/64 inch Cutting Length, (B1) 5/8 inch Cutting Length(d)1/4 inch Shank, (L)2-1/2 inch total length.
- Advanced nACo coating: Turnextte Spiral Router Bits are coated with nACo, which has 4600HV nano hardness, 1200 max. service temperature, 0.4 coefficient of friction. Brings you a triple experience from other CNC spiral router bit.
- WIDELY APPLICATION:Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits. For cutting plywood, OAK, MDF, and any hardwood working and keep sharp after multiple uses.
- ADOPT ULTRA-FINE MATERIAL:Special unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. New version of the bit body and chip removal groove design achieve excellent chip removal and cutting.
- SERVICE FIRST:We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand.If you have any questions about the product, please contact us. Your problem will be resolved within 24 hours.
- See more on Amazon...
Brand: Turnextte | Manufacturer: Turnextte
Dimensions: 0.39 x 2.17 x 0.39 inches
See On Amazon #18
SpeTool 1/8 Inch Spiral Downcut Router Bit 1/4 Inch Shank Extra Long 3 Inch with Extra Long Life Coating CNC Carbide Router Wood Bits
Asin: B0BN5R6CHX | Model: SPLS-D1/4-1/8-D-SPE-X | PartNumber: SPLS-D1/4-1/8-D-SPE-X
Down Cut. Spiral Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Durable And Precise. This Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable.
Features
- SPECIFICATION. Down cut router bits 1" cutting length; 1/8" cutting diameter; 1/4" shank; 3" overall length, can be used on routers with 1/4" collect.
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable
- DOWN CUT. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- COMPATIBILITY. This Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- DURABLE AND PRECISE. This downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #19
SpeTool Downcut Spiral Router Bits 1/4 inch Shank,1/4 inch Cutting Diameter Solid Carbide CNC Router Bit Woodworking End Mills for Wood Carving Slotting
Asin: B07NVL6KWT | Model: SP-D1/4-1/4-D | PartNumber: SP-D1/4-1/4-D
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 router bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #20
Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4" Shank Up-Cut)
Asin: B09N9Q5T5Y | Model: E2109 | PartNumber: E2109
Up To 2.5X Longer Life Compared To Uncoated Bits..
The Spiral Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The 1/4-Inch Flush Trim Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp..
Industrial Quality Upcut Flush Trim Router Bit: Made Of Solid Virgin Carbide With Nano Blue Coated. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality..
Features
- Professional Flush Trim Router Bit with Top Bearing: 1/4 Shank, 1 Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.
- INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Up to 2.5X longer life compared to uncoated bits.
- The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- The spiral router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #21
Dremel 560 Drywall Cutting Bit , 1/8",Gray
Asin: B00004UDIA | Model: 560 | PartNumber: 560 | Ean: 0044921993829, 0080596010614 | UPC: 080596010614, 044921993829
Piloted Tip To Cut Around Outlet And Switch Boxes.
For Use With Rotary Tools That Can Accommodate A 1/8" Shank Size.
Use With The 565 Multi-Purpose Cutting Attachment Is Recommended; The Attachment Is Designed To Help Maintain Depth During The Application..
Ideal For Cutting Drywall For Electrical Boxes, Air Vents And Other Wall Features.
Features
- Turn your rotary tool into a powerful cutting machine
- Ideal for cutting drywall for electrical boxes, air vents and other wall features
- Piloted tip to cut around outlet and switch boxes
- Use with the 565 Multi-Purpose Cutting attachment is recommended; the attachment is designed to help maintain depth during the application.
- For use with rotary tools that can accommodate a 1/8 shank size
- See more on Amazon...
Brand: Dremel | Manufacturer: Dremel
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
Warranty: No
See On Amazon #22
EANOSIC Upcut Spiral Router Bit 1/4 inch Shank, 1/8 inch Cutting Diameter, Extra Long 3 inch Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving
Asin: B0B4FYQ66X | Model: E201 | PartNumber: E201
Cnc Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Up-Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- Upcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length
- SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #23
ZahyoX 1/4 Inch Shank Upcut Spiral Router Bit, Nano Coated Solid Carbide Straight CNC End Mill for Wood, 1/4 Dia x 1 CL x 2-1/2 OVL
Asin: B0BRV7DCDG | Ean: 0717577616205 | UPC: 717577616205
The Geometry Design Has Been Iterated Hundreds Of Times To Ensure A Perfect Balance Between Tool Life And Cutting Efficiency. We Run Our Bits Systematically On Various Machines And Materials To Test The Performance Of Each Iteration..
The Bit Is Made Of Wc-Co Alloy, And 100% Made By Our Own Factory To Ensure Consistency, You Can Expect That Every Bit We Produce Performs Exactly The Same..
X-Series Is One Of Our Signature Product Lineups And Bestselling For Wood Cutting, It Is Made By Our Own Pvd Process Of Nano Composite Titanium Aluminum Silicon Nitride Which Provides Highest Hardness Of 3800 Hv, Extremely Low Friction Of 0.25, At 900°F Max Working Temperature. The Coating Provides 3 Times Longer Tool Life For Wood Cutting Performance..
Zahyox Is Industrial Leading Manufacturer, Making Solid Carbide Material And Solid Carbide Router Bits Is Our Sole Business For Over Two Decades, We Make Our Products Like Treating Art..
Features
- Specs: 1/4" Cutting Diameter, 1/4" Shank, 1" Cutting Length, 2-1/2" Overall Length, 2 Flutes, Up Cut Spiral, Nano Coated.
- ZahyoX is industrial leading manufacturer, making solid carbide material and solid carbide router bits is our sole business for over two decades, we make our products like treating art.
- The geometry design has been iterated hundreds of times to ensure a perfect balance between tool life and cutting efficiency. We run our bits systematically on various machines and materials to test the performance of each iteration.
- X-Series is one of our signature product lineups and bestselling for wood cutting, it is made by our own PVD process of Nano Composite Titanium Aluminum Silicon Nitride which provides highest hardness of 3800 HV, extremely low friction of 0.25, at 900 F max working temperature. The coating provides 3 times longer tool life for wood cutting performance.
- The bit is made of WC-CO Alloy, and 100% made by our own factory to ensure consistency, you can expect that every bit we produce performs exactly the same.
- See more on Amazon...
Brand: Zahyox | Manufacturer: ZahyoX
Dimensions: 2.50 x 0.25 x 0.25 inches
See On Amazon #24
kwb 6.8mm Roll-Forged HSS Metal Drill Bit with 118 Point Angle for Easy Drilling
Asin: B00GR2L6ZI | Model: 209-668 | PartNumber: 209-668 | Ean: 4009312096684
Roll-Forged Design: Crafted Using Heated Metal Rods Rolled Into Spiral Shape For Efficient Chip Removal During Drilling..
Optimal Performance: Right-Hand Cut, Cylindrical Drill Bit With A Diameter Of 6.8Mm, Ideal For M8 Threaded Hole..
Standard Compliance: Conforms To Din 338 Standards, Type N, Featuring A 118° Point Angle And Bluish-Black Color..
Versatile Use: Suitable For Alloyed And Unalloyed Steel, Cast Iron, Non-Ferrous Metals, And Hard Plastics..
Features
- PRECISION DRILLING: High-quality roll-forged HSS metal drill bit with 118 point angle for accurate drilling in various materials.
- VERSATILE USE: Suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals, and hard plastics.
- ROLL-FORGED DESIGN: Crafted using heated metal rods rolled into spiral shape for efficient chip removal during drilling.
- STANDARD COMPLIANCE: Conforms to DIN 338 standards, Type N, featuring a 118 point angle and bluish-black color.
- OPTIMAL PERFORMANCE: Right-hand cut, cylindrical drill bit with a diameter of 6.8mm, ideal for M8 threaded hole.
- See more on Amazon...
Brand: kwb | Manufacturer: KWB
Weight: 2.20 pounds
See On Amazon #25
for Freud 7/32" (Dia.) x 3/4" Down Spiral Router Bit, 2-Pack, 76-204-2PK
Asin: B0CXN2K5B9 | Ean: 0795965851902 | UPC: 795965851902
Longlasting Heattreated Steel Body For Increased And Wear Resistance.
Smooth Cuts Down Spiral Design Helps To Eliminate Chip Buildup And Produces Smooth For Finishes.
Highperformance Precisionground For Carbide Tips For Efficient And Clean Cuts.
Features
- For Freud 7/32" (Dia.) x 3/4" Down Spiral Router Bit, 2-Pack, 76-204-2PK
- highperformance precisionground for carbide tips for efficient and clean cuts
- longlasting heattreated steel body for increased and wear resistance
- smooth cuts down spiral design helps to eliminate chip buildup and produces smooth for finishes
- See more on Amazon...
Brand: Venbytech | Manufacturer: VENBYTECH
See On Amazon #26
for Freud 1/2" (Dia.) x 2" Up Spiral Router Bit, 2-Pack, 75-109-2PK
Asin: B0CYDYPSQK | Ean: 0759311815048 | UPC: 759311815048
Comes In A Convenient 2Pack For Extra Value.
For Excellent For Creating Smooth And Precise Cuts In For Various Materials.
Designed For Use With For Freud 1 2 X 2 Up Spiral Router Bit.
Features
- For Freud 1/2" (Dia.) x 2" Up Spiral Router Bit, 2-Pack, 75-109-2PK
- designed for use with for freud 1 2 x 2 up spiral router bit
- comes in a convenient 2pack for extra value
- for excellent for creating smooth and precise cuts in for various materials
- See more on Amazon...
Brand: BELION | Manufacturer: BELION
See On Amazon #27
SHARPRO Upcut Spiral Router Bit 1/4 Inch Shank 1/8 Inch Cutting Diameter Solid Carbide CNC End Mill, Ideal for Wood Carving, Slot Mortise, Engraving, Grinding
Asin: B0CZ78P36Z | Model: SPWB52LX6.3.12 | PartNumber: SPWB52LX6.3.12 | Ean: 0769293653958 | UPC: 769293653958
🟢Design Features: Dual Flute Design For Quick Chip Removal, Center Cutting Edge Design And 178-Degree Nose Angle Design Allow The Tool To Drill Into The Material And Quickly Removal Chips From The Front End..
🟢Brand: Sharpro's Business Scope Spans The Entire Industry Chain, With Dedicated Centers For Design, Engineering, Research, And Development. Each Tool Is Assigned A Unique Serial Number For Easy Tracking, Ensuring Traceability And Quality Control Throughout The Production Process..
🟢Durability: Constructed From Tungsten Carbide, With Evenly Spaced Blades That Increase The Tool's Body Rigidity. This Allows For High-Speed Cutting Of Soft Materials Like Wood, Ensuring A Longer Lifespan..
🟢Wide Use: Suitable For Handhold Routers, Cnc Routers, Engraving Machines, Cnc Milling Machines, Cnc Machining Centers And Traditional Milling Machines, It Performs Well In Both Home And Professional Environments..
Features
- Specification: 1/4 shank, 1/8 cutting diameter, 12mm cutting length, 50mm total length, up-cut, sharper blade for clean and smooth handling of all kinds of wood carving, slot mortise, engraving, grinding.
- Wide Use: Suitable for handhold routers, CNC routers, engraving machines, CNC milling machines, CNC machining centers and traditional milling machines, it performs well in both home and professional environments.
- Design Features: Dual flute design for quick chip removal, center cutting edge design and 178-Degree nose angle design allow the tool to drill into the material and quickly removal chips from the front end.
- Durability: Constructed from tungsten carbide, with evenly spaced blades that increase the tool's body rigidity. This allows for high-speed cutting of soft materials like wood, ensuring a longer lifespan.
- Brand: SHARPRO's business scope spans the entire industry chain, with dedicated centers for design, engineering, research, and development. Each tool is assigned a unique Serial Number for easy tracking, ensuring traceability and quality control throughout the production process.
- See more on Amazon...
Brand: SHARPRO | Manufacturer: SHARPRO
Weight: 0.29 pounds
See On Amazon #28
CMT 192.081.11 Spiral bit
Asin: B00JBJGHX0 | Model: 192.081.11 | PartNumber: 192.081.11 | Ean: 8019296007091
Application: Used For Cutting, Copying, Panel Sizing And Any Routing Applications On Solid Wood, Wood Composites, Plastic Materials And Laminates.
Technical Features: Premium Quality Hwm - 2 Spiral Cutting Edges (Z2) - It Provides An Excellent Finish On The Upper Side Of The Workpiece - Downward Chip Ejection.
Machine: It Can Be Used On Machining Centres, Point To Point Machines, Cnc Routers And Hand-Held Routers Equipped With Chucks Or Adaptors.
Diameter 8Mm - Cutting Length 32Mm - Total Length 80Mm.
Features
- S (Shank Diameter) = 8mm
- Diameter 8mm - Cutting Length 32mm - Total Length 80mm
- APPLICATION: Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates
- MACHINE: it can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors
- TECHNICAL FEATURES: Premium quality HWM - 2 spiral cutting edges (Z2) - it provides an excellent finish on the upper side of the workpiece - Downward chip ejection
- See more on Amazon...
Brand: CMT | Manufacturer: CMT
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.18 pounds
See On Amazon #29
BOSCH RBS010 10-Piece 1/2 In. and 1/4 In. Shank Carbide-Tipped All-Purpose Professional Router Bits Assorted Set with Case for Applications in Straight, Trimming, Decorative Edging, Dovetail Joinery
Asin: B00N8QM678 | Model: RBS010 | PartNumber: RBS010 | Ean: 0732454872697, 0735090810870, 0000346461954 | UPC: 000346461954, 732454872697, 735090810870
Precision-Ground Carbide Tips For Sharper Edges And Smoother Finish.
Includes: Straight/Mortising Bits: 85460M, 85265M, 85249M; Surface Forming Bits: 85444M, 85219M; Cabinetry/Joinery Bit: 84709M; Edge Forming Bits: 85594M, 85592M, 85597M; Trimming/Cutout Bit: 85441M.
Reusable Storage Case With A Solid Wood Base And Clear Plastic Top.
Micrograin Carbide Tips Provide Superior Wear Resistance And Long Life.
Features
- Most popular profiles for all routing job applications
- Micrograin Carbide tips provide superior wear resistance and long life
- Precision-ground Carbide tips for sharper edges and smoother finish
- Reusable storage case with a solid wood base and clear plastic top
- Includes: Straight/mortising bits: 85460M, 85265M, 85249M; Surface forming bits: 85444M, 85219M; Cabinetry/joinery bit: 84709M; Edge forming bits: 85594M, 85592M, 85597M; Trimming/cutout bit: 85441M
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 4.50 x 9.00 x 4.25 Inches | Weight: 2.83 pounds
Warranty: Product Defects Only
See On Amazon #30
SpeTool Upcut Spiral Router Bits Extra Long (4 inch) with 1/2 Inch Shank , 1/2 Cutting Diameter Solid Carbide CNC Router Bits End Mill for Wood Mortises and Cutting Dadoes Carving
Asin: B07V9QP7QP | Model: SPL-D1/2-1/2-U | PartNumber: SPL-D1/2-1/2-U
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/2" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length, can be used on routers with 1/2" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/2 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon
Looking For Something Else?
Search