Best dust collectors & air cleaners - Buying Guide
Last Updated: 04/24/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.
#1
Dustopper PRO, Low-Profile Dust Separator for Shop Wet/Dry Vacuums. Includes High-Flow 90 Degree Sweep Elbows and Connection Hose. Fits Standard 5 Gallon Buckets, Made in USA
Asin: B0CN7DC7N9 | Model: DT10000 | PartNumber: DT10000 | Ean: 0862597000463 | UPC: 862597000463
Ready For Use In Seconds: Install The High-Quality Epdm Gasket, Put Your Dustopper Pro On A Standard-Lid Bucket, Connect The Elbows And Hoses To Your Vacuum And Dustopper, Then Get To Work Collecting Dust..
Incredibly Durable: Made Of Anti-Static Resin With Thick Walls And A Reinforced Top, Making It Strong Enough To Handle The Toughest Jobs. The Clear Top Allows For Better Visual Inspection Inside The Separator And Bucket..
Two Included Elbows Are Engineered For Maximum Dust Throughput: Dustopper Brand Elbows Are The Only High-Flow Sweep Elbows Used For Dust Collection That Have Both A Large Radius And A Male And Female Fitting. Sharp 90-Degree Elbows On Many Systems Slow Air Flow And Limit Dust Throughput..
Convenient: The Pre-Installed, Easy-To-Use Latches Make Emptying The Bucket A Snap. Simply Unlatch Them, Remove The Dustopper Pro, Dump Your Debris, And Snap The Dustopper Back On..
Collects Water And Can Be Used Around The House: Efficiently Separates Liquids, Making It Useful For Flood & Water Remediation. Easily Fill And Dump A Bucket Without Worrying About Your Vacuum. The Dustopper Pro Can Also Efficiently Separate Other Debris: Small Shavings, Mulch/Small Wood Chips, Dirt/Soil, Sand, Small Nails/Screws, Pet/Human Hair, Cat Litter, And More. Separation Results And Efficiency May Vary Depending On The Size Of The Debris Or Type Of Liquid..
Fits Perfectly With Most Shop Vacuums: Compatible With Wet/Dry And Shop Vacuums That Have A Typical 2-1/2” (2-1/4” Actual) Hose And Accessory Port. For Vacuums With Different Port Sizes, Adapters Can Be Used To Connect To The Dustopper. Best Results Are Achieved With A Vacuum Having 5.0 Hp Or Higher..
Added Safety With Grounding Lug: Includes A Grounding Lug To Help Protect Against Electrostatic Shock. Simply Connect The Lug To A Ground. Grounding Wire Sold Separately..
High Efficiency Dust Collection: The Dustopper Pro Removes And Collects More Than 99.9% Of Typical Shop Dust Before It Gets Into Your Vacuum For Superior Cleaning. Protect And Spend Less Money Replacing Filters..
Features
- The Leader in Low-Profile: Dustopper is the original and only patented low-profile dust separator on the market.
- High Efficiency Dust Collection: The Dustopper Pro removes and collects more than 99.9% of typical shop dust before it gets into your vacuum for superior cleaning. Protect and spend less money replacing filters.
- Ready For Use in Seconds: Install the high-quality EPDM gasket, put your Dustopper PRO on a standard-lid bucket, connect the elbows and hoses to your vacuum and Dustopper, then get to work collecting dust.
- Fits Perfectly with Most Shop Vacuums: Compatible with wet/dry and shop vacuums that have a typical 2-1/2 (2-1/4 actual) hose and accessory port. For vacuums with different port sizes, adapters can be used to connect to the Dustopper. Best results are achieved with a vacuum having 5.0 HP or higher.
- Convenient: The pre-installed, easy-to-use latches make emptying the bucket a snap. Simply unlatch them, remove the Dustopper PRO, dump your debris, and snap the Dustopper back on.
- Collects Water and Can be Used Around the House: Efficiently separates liquids, making it useful for flood & water remediation. Easily fill and dump a bucket without worrying about your vacuum. The Dustopper PRO can also efficiently separate other debris: small shavings, mulch/small wood chips, dirt/soil, sand, small nails/screws, pet/human hair, cat litter, and more. Separation results and efficiency may vary depending on the size of the debris or type of liquid.
- Incredibly Durable: Made of anti-static resin with thick walls and a reinforced top, making it strong enough to handle the toughest jobs. The clear top allows for better visual inspection inside the separator and bucket.
- Two Included Elbows Are Engineered for Maximum Dust Throughput: Dustopper brand elbows are the only high-flow sweep elbows used for dust collection that have both a large radius and a male and female fitting. Sharp 90-degree elbows on many systems slow air flow and limit dust throughput.
- Added Safety with Grounding Lug: Includes a grounding lug to help protect against electrostatic shock. Simply connect the lug to a ground. Grounding wire sold separately.
- See more on Amazon...
Brand: Dustopper | Manufacturer: Dustopper
See On Amazon #2
Dust Deputy DIY Anti-Static Retrofit Cyclone Separator for Wet/Dry Shop Vacuums (DD DIY)
Asin: B002JP315K | Model: AXD001004 | PartNumber: AXD001004 | Ean: 0864527000017 | UPC: 864527000017
Wet Or Dry – This Simple And Efficient Design Can Be Adapted For Use With Any Make, Size, Or Model Wet/Dry Vacuum And Features Tapered 2. 0" Ports For Secure Fittings Using A Variety Of Dust Collection Hose Sizes. Works With Most Materials: Wood Dust, Drywall Dust, Concrete Dust, Clay/Silica Dust, Blasting Soda, Cooled Ash & Soot, Water, Metal Shavings, Baking Flour, Grass & Leaves, Pet/Animal Hair, Pharmaceutical Waste, And Much More!.
Us Pat. 7282074.
Made In America – Our Dust Deputy Diy (Do-It-Yourself) Cyclone Lets You Build The Dust Control System That Works Best For You. Diy Product Contains The Cyclone Separator, Gasket, And Mounting Hardware. You Supply The Waste Container, The Hose, Etc. With The Dust Deputy Diy Cyclone, You're Limited Only By Your Imagination!.
Longer Lifespan - Prevents Fine Dust And Large Debris From Reaching Your Wet/Dry Vacuum's Filter, Reducing The Need For Cleanings And Prolonging The Lifespan Of Your Filter. The Dust Deputy Diy Will Save You Money On Expensive Replacement Filters And Dust Bags, And Time, Allowing You To Focus On The Task At Hand..
Features
- INCREASED SUCTION POWER - The original and still the best! Now 20% more efficient with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove up to 99.9% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
- LONGER LIFESPAN - Prevents fine dust and large debris from reaching your wet/dry vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy DIY will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.
- WET OR DRY This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2. 0 ports for secure fittings using a variety of dust collection hose sizes. Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
- MADE IN AMERICA Our Dust Deputy DIY (Do-It-Yourself) cyclone lets you build the dust control system that works best for you. DIY product contains the cyclone separator, gasket, and mounting hardware. You supply the waste container, the hose, etc. With the Dust Deputy DIY cyclone, you're limited only by your imagination!
- US Pat. 7282074
- See more on Amazon...
Brand: Oneida Air Systems | Manufacturer: Oneida Air Systems
Dimensions: 7.40 x 15.50 x 9.30 Inches | Weight: 1.77 pounds
Warranty: Warranty
See On Amazon #3
Festool 574837 Ct Midi I Hepa Bluetooth Dust Extractor
Asin: B07R9PYC9T | Model: 574837 | PartNumber: 574837 | Ean: 4014549274835
Sys-Dock With T-Loc For Connecting Sustainers In An Instant.
3.9 Gallon Container Capacity.
Smooth Suction Hose With Conical Geometry For High Suction Power And Seamless Processes Without Catching.
130 Cfm Of High-Performance Suction.
Internal Hose Holder For Safe And Clean Transport Of The Smooth Suction Hose.
Saves You A Trip To The Extractor – Thanks To The Integrated Bluetooth Technology, The Mobile Dust Extractor Is Started Automatically By Bluetooth Battery Packs Or Remote Control.
Features
- Touch operation for intuitive control of the mobile dust extractor
- Saves you a trip to the extractor thanks to the integrated Bluetooth technology, the mobile dust extractor is started automatically by Bluetooth battery packs or remote control
- Sys-dock with T-Loc for connecting sustainers in an instant
- Internal hose holder for safe and clean transport of the smooth suction hose
- Smooth suction hose with conical geometry for high suction power and seamless processes without catching
- 130 CFM of high-performance suction
- 3.9 gallon container capacity
- See more on Amazon...
Brand: Festool | Manufacturer: Festool
Dimensions: 26.00 x 20.00 x 32.00 inches | Weight: 24.91 Pounds
Warranty: 3 year warranty.
See On Amazon #4
WEN DC3401 5.7-Amp 660 CFM Rolling Dust Collector with 12-Gallon Bag and Optional Wall Mount , Black
Asin: B09Q7F9NC8 | Model: DC3401 | PartNumber: DC3401 | Ean: 0044459934011 | UPC: 044459934011
Compact Design Includes An Onboard Carrying Handle For Easy Storage And Transportation.
Features Lockable Swivel Casters, An Optional Wall Mount, A 12-Gallon 5-Micron Zippered Collection Bag, And A Two-Year Warranty.
Measures In At 34.25 X 13 X 14.2 Inches In Size With A Weight Of 17 Pounds.
4-Inch Dust Port Allows For Connection To Your Favorite Woodworking Tools.
Features
- 5.7-amp brushed motor combined with the 6-inch impeller moves up to 660 cubic feet of air per minute
- 4-inch dust port allows for connection to your favorite woodworking tools
- Compact design includes an onboard carrying handle for easy storage and transportation
- Measures in at 34.25 x 13 x 14.2 inches in size with a weight of 17 pounds
- Features lockable swivel casters, an optional wall mount, a 12-gallon 5-micron zippered collection bag, and a two-year warranty
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #5
BOSCH 9 Gallon Dust Extractor with Auto Filter Clean and HEPA Filter VAC090AH, Portable
Asin: B076CSZXY3 | Model: VAC090AH | PartNumber: VAC090AH | Ean: 0000346509526 | UPC: 000346509526
Osha Compliant: Featuring Bosch Pro Plus Guard, An End To End Dust Collection System To Help Users Move Toward Osha Silica Table 1 Dust Compliance.
Compatible: With Power Tool Activations Users Can Utilize Power Tool's Switch To Turn Vacuum On And Off; The Power Broker Dial Will Match The Suction Force To Application.
Power: With Strong Airflow And Suction Power, The Bosch Vac090ah Dust Extractor Delivers A Maximum 150 Cubic Feet Of Air Per Minute Rate (Cfm), With A Sustainable Maximum 97 In. Static Water Lift.
Performance: The Included Hepa Filter Caputres 99.97 Percent Of Particles At 0.3 Microns Or Larger While The Included Fleece Filter Bag Helps To Protect The Filter And Provides The Optimal Containment Of Dry Dust And Debris.
Features
- AUTO CLEANING: With automatic filter cleaning, the Bosch VAC090AH dust extractor cleans the filter every 15 seconds to help maintain maximum suction power
- PERFORMANCE: The included HEPA filter caputres 99.97 percent of particles at 0.3 microns or larger while the included fleece filter bag helps to protect the filter and provides the optimal containment of dry dust and debris
- OSHA COMPLIANT: Featuring Bosch PRO plus GUARD, an end to end dust collection system to help users move toward OSHA Silica Table 1 dust compliance
- POWER: With strong airflow and suction power, the Bosch VAC090AH dust extractor delivers a maximum 150 cubic feet of air per minute rate (CFM), with a sustainable maximum 97 in. static water lift
- COMPATIBLE: With power tool activations users can utilize power tool's switch to turn vacuum on and off; The Power Broker dial will match the suction force to application
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 22.60 x 20.50 x 14.50 inches | Weight: 28.00 pounds
Warranty: Limited 1 year.
See On Amazon #6
POWERTEC 70151 Dust Hood Rectangular Shape, Funneled 4-Inch Fitting By 10-Inch Wide Attachment for Dust Collection
Asin: B002E4WSRS | Model: 70151 | PartNumber: 70151 | Ean: 7336117917980, 0785533751192, 0736815006028 | UPC: 736815006028, 785533751192
Features: A Tapered Port End That Offers A Quick Connect Fitting To 4-Inch Id Dust Hoses.
Specifications: Overall Size Is 10" X 4" X 9" | Rectangular Shaped | Black.
Premium Build: This Dust Hood Attachment Is Made Out Of High Quality Abs Plastic, Which Is Primarily Known For It’S Abrasion Resistance, High Tensile Strength, And Long-Term Durability.
Function: Works With A Wide Range Of Machines And Can Work As A Convenient Workshop Tool That Can Be Positioned On A Table Close To The Point Of Dust Production.
Features
- INCLUDES: (1) Wide Mouth Rectangular Dust Hood
- FUNCTION: Works with a wide range of machines and can work as a convenient workshop tool that can be positioned on a table close to the point of dust production
- FEATURES: A tapered port end that offers a quick connect fitting to 4-inch ID dust hoses
- PREMIUM BUILD: This dust hood attachment is made out of high quality ABS plastic, which is primarily known for it s abrasion resistance, high tensile strength, and long-term durability
- SPECIFICATIONS: Overall size is 10 x 4 x 9 | Rectangular shaped | Black
- See more on Amazon...
Brand: POWERTEC | Manufacturer: Southern Technology LLC
Dimensions: 4.25 x 9.00 x 10.00 Inches | Weight: 0.75 Pounds
See On Amazon #7
Dust Right 4 Inch Tool Ports (Pack of 2) Port Fits for 4 Inch Dust Collection Hose Plastic Small Port Hose - Dust Collection Fittings Includes Two Ports and Two Metal Hose Clamps
Asin: B0025AC6MI | Model: RK-25516 | PartNumber: RK-25516 | Ean: 0733175255165 | UPC: 733175255165
Specially Designed: The Dust Port 4 Inch Is Designed To Work With The Dust Right Handle, Which Is Available Either Individually Or In One Of Our Dust Right Packages That Is Sold Separately..
For Smaller Ports: To Connect The Handle To Smaller 2-1/2" Ports, Use A Tool Port In Conjunction With Our Hose Adapter (Which Is Sold Separately)..
Premium Quality: Our Vacuum & Dust Collector Accessories Are Made With Abs Plastic That Is Tough And Wear-Resistant, Has Anti-Clogging Properties, And Rugged Strength For Long-Term Durability..
Flexible Rubber Boot: The Dust Collection Port Features A Flexible Rubber Boot On One Side That Guarantees A Tight Connection And Allows For Slight Variations In The Size Of The Tool's Dust Port..
Features
- Pack Of 2 Dust Collection Ports: Move dust collection from tool to tool like never before! One end connects tightly to any tool with a 4 inch dust port, while the other fits perfectly into the handle (which connects to a 4" dust collector hose and, ultimately, your dust collector).
- Flexible Rubber Boot: The dust collection port features a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port.
- Specially Designed: The dust port 4 inch is designed to work with the dust right handle, which is available either individually or in one of our Dust Right Packages that is sold separately.
- Premium Quality: Our vacuum & dust collector accessories are made with ABS plastic that is tough and wear-resistant, has anti-clogging properties, and rugged strength for long-term durability.
- For Smaller Ports: To connect the handle to smaller 2-1/2 ports, use a Tool Port in conjunction with our hose adapter (which is sold separately).
- See more on Amazon...
Brand: ROCKLER | Manufacturer: ROCKLER
Weight: 1.23 pounds
See On Amazon #8
DeWALT DWXAF101 Air Filtration System, 3-Speed Hanging Ceiling Dust Collectors for Woodworking, Remote Controlled Dust Collection Systems, 2 Stage Filtration, for Shop Garage
Asin: B0BGBM3QFX | Model: DWXAF101 | PartNumber: DWXAF101 | Ean: 0810018926403 | UPC: 810018926403
Four Working Modes: Built-In Hi Mode, Mid Mode, Lo Mode, And Auto Mode (Automatic Sensor Sensing Air Quality, Automatic Identification Of Switching Gears)..
Tool Warranty: 3-Year Limited Warranty, 1-Year Free Service, And 90 Days Money-Back Guarantee..
Easy To Use: Built-In If Remote Controller And Filter Replace Reminder Function. Easily Hang It From The Ceiling With Hooks And Chains. Easy To Carry With Flip-Up Handle..
8H Timer Settings: Built-In Timer Settings For 1H, 2H, 4H, And 8H Will Shut Off Automatically At The End Of The Designated Time, Cleaning The Air While You're Away..
Features
- 2-Stage Filtration: Includes a static cotton medium efficiency filter (cleanable) and an H11 HEPA high-efficiency filter, which can filter more than 95% of 0.3 m particles.
- 8H Timer Settings: Built-in timer settings for 1H, 2H, 4H, and 8H will shut off automatically at the end of the designated time, cleaning the air while you're away.
- Four Working Modes: Built-in HI mode, MID mode, LO mode, and AUTO mode (Automatic sensor sensing air quality, automatic identification of switching gears).
- Easy to Use: Built-in IF remote controller and filter replace reminder function. Easily hang it from the ceiling with hooks and chains. Easy to carry with flip-up handle.
- Tool Warranty: 3-year limited warranty, 1-year free service, and 90 days money-back guarantee.
- See more on Amazon...
Brand: DEWALT | Manufacturer: Alton Industries
Dimensions: 10.20 x 20.00 x 15.90 Inches | Weight: 20.90 Pounds
Warranty: 3 Year Warranty
See On Amazon #9
Mullet High-Speed Cyclone Dust Collector
Asin: B095HYZT38 | Model: 1900-110 | PartNumber: 1900-110 | Ean: 0860005908127 | UPC: 860005908127
Rigid, Cut-To-Fit Pvc Connection -- Eliminates The Frankenstein-Like Assembly Of Bolts, Bungees, And Duct Tape Of Other Systems Creating A Unified, Airtight Connection And A Vac Filter That Stays Cleaner, Longer..
Made In Usa -- Headquartered In Dripping Springs, Texas..
Universal Vac Compatibility -- Included Hose Adapters Allow For Easy Connection To Virtually All Wet Dry Shop Vacuums, Dust Extractors And Their Hoses. Red, Orange, Yellow Or Green; Tall, Short, Big Or Small; Mullet Is Made To Fit 'Em All!.
The Faster The Spin, The More Dust That Falls In! -- Parabolic Design And Seamless One-Piece Construction Create A Faster Airstream, More Suction Power And Better Capture Efficiency That Ordinary Straight-Wall Cyclone-And-Bucket Assemblies..
Features
- NO MORE CLOGGED FILTERS -- Pre-separates over 99% of debris sending clean air to your shop vac or dust extractor keeping suction strong and your vac running in tip top shape.
- THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! -- Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency that ordinary straight-wall cyclone-and-bucket assemblies.
- RIGID, CUT-TO-FIT PVC CONNECTION -- Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer.
- UNIVERSAL VAC COMPATIBILITY -- Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green; tall, short, big or small; Mullet is made to fit 'em all!
- MADE IN USA -- Headquartered in Dripping Springs, Texas.
- See more on Amazon...
Brand: Mullet | Manufacturer: Mullet Tools
Weight: 7.50 Pounds
See On Amazon #10
Festool 577084 CT 36 E HEPA Dust Extractor
Asin: B091J25T8S | Model: 577084 | PartNumber: 577084 | Ean: 4014549394236
Constantly High Suction Because Of The Compact High Performance Turbine.
Hose Garage And Cable Windup For Greater Tidiness And Safety.
Economical Because Of The Optimal Use Of The Available Volume With A Selfclean Filter Bag In The Container.
Antistatic Function Prevents Static Developing During Work.
Attachment Of Systainers Via Sys-Dock.
Smooth Suction Hose And Optimized Sys-Dock With Cord Holder And T-Loc Function For Conveniently Connecting Systainers To The Mobile Dust Extractor.
Container/Filter Bag Capacity 36/34 L.
Can Be Individually Retrofitted With An Additional Compressed Air Or Bluetooth Module For Remote Control On The Suction Hose Or Automatic Start Via The Bluetooth Battery Pack..
Features
- Maximum utilization of the container volume the gross volume is the same as the net volume
- Can be individually retrofitted with an additional compressed air or Bluetooth module for remote control on the suction hose or automatic start via the Bluetooth battery pack.
- Constantly high suction because of the compact high performance turbine
- Smooth suction hose and optimized SYS-Dock with cord holder and T-LOC function for conveniently connecting Systainers to the mobile dust extractor
- Antistatic function prevents static developing during work
- Attachment of Systainers via SYS-Dock
- Hose garage and cable windup for greater tidiness and safety
- Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container
- Container/filter bag capacity 36/34 l
- See more on Amazon...
Brand: Festool | Manufacturer: Festool
Dimensions: 29.13 x 23.62 x 15.75 Inches | Weight: 34.00 Pounds
Warranty: 3 year manufacturer.
See On Amazon #11
BUCKTOOL 1HP 6.5AMP Wall-mount Dust Collector with Remote Control and 2-micron Dust Filter Bag 550CFM Air Flow DC30A-1
Asin: B08LKDK722 | Model: DC30A-1-ZFH | PartNumber: DC30A-1-ZFH
Two Ways To Use: Our Dust Collector Can Be Mounted On The Wall And It Has Wheels With A Brake For Easy Movement And Fix Position.
Included Remote Control: This Updated Dust Collector Has A 49 Ft Remote Control So That You Can Control Your Dust Collector More Conveniently And Improve Your Work Efficiency.
Better With 2 Micron Dust Bag: To Ensure A Better Experience, We Suggest Matching With Our 2-Micron Filter Bag When You Use This Dust Collector.
Powerful Motor: The Dust Collector Is Equipped With A 1Hp Powerful Induction Motor With 6.5Amp 550Cfm Airflow, The Steel Impeller Supply 550 Cfm Airflow.
Features
- TEFC Induction Motor: Benefited from the Totally Enclosed, Fan-Cooled cover design and advantage of the induction motor, our motor is significantly more durable, lower noise, and maintenance-free than the brushless motor, if you are not an occasional user, and want a shop dust collector for woodworking, this is the one for you
- POWERFUL MOTOR: The dust collector is equipped with a 1HP powerful induction motor with 6.5AMP 550CFM airflow, the steel impeller supply 550 CFM airflow
- TWO WAYS TO USE: Our dust collector can be mounted on the wall and it has wheels with a brake for easy movement and fix position
- BETTER WITH 2 MICRON DUST BAG: To ensure a better experience, we suggest matching with our 2-micron filter bag when you use this dust collector
- INCLUDED REMOTE CONTROL: This updated dust collector has a 49 FT remote control so that you can control your dust collector more conveniently and improve your work efficiency
- See more on Amazon...
Brand: Bucktool | Manufacturer: BUCKTOOL
See On Amazon #12
Festool 577083 CT 26 E HEPA Dust Extractor
Asin: B09K4PQJHG | Model: 577083 | PartNumber: 577083 | Ean: 4014549394229
Constantly High Suction Because Of The Compact High Performance Turbine.
Hose Garage And Cable Windup For Greater Tidiness And Safety.
Economical Because Of The Optimal Use Of The Available Volume With A Selfclean Filter Bag In The Container.
Antistatic Function Prevents Static Developing During Work.
Attachment Of Systainers Via Sys-Dock.
Smooth Suction Hose And Optimized Sys-Dock With Cord Holder And T-Loc Function For Conveniently Connecting Systainers To The Mobile Dust Extractor.
Container/Filter Bag Capacity 26/24 L.
Can Be Individually Retrofitted With An Additional Compressed Air Or Bluetooth Module For Remote Control On The Suction Hose Or Automatic Start Via The Bluetooth Battery Pack..
Features
- Maximum utilization of the container volume the gross volume is the same as the net volume
- Can be individually retrofitted with an additional compressed air or Bluetooth module for remote control on the suction hose or automatic start via the Bluetooth battery pack.
- Constantly high suction because of the compact high performance turbine
- Smooth suction hose and optimized SYS-Dock with cord holder and T-LOC function for conveniently connecting Systainers to the mobile dust extractor
- Antistatic function prevents static developing during work
- Attachment of Systainers via SYS-Dock
- Hose garage and cable windup for greater tidiness and safety
- Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container
- Container/filter bag capacity 26/24 l
- See more on Amazon...
Brand: Festool | Manufacturer: Festool
Dimensions: 26.38 x 23.62 x 15.75 inches | Weight: 37.00 pounds
Warranty: 3 year manufacturer.
See On Amazon #13
DEWALT 20V MAX* Dust Extractor, Brushless, Universal, Tool Only (DWH161B)
Asin: B07WQB34DX | Model: DWH161B | PartNumber: DWH161B | Ean: 0885911620017 | UPC: 885911620017
Multiple Strap Connection Points And A Belt Hook Enable The User To Position The Dust Extractor For The Best Possible Ergonomic Solution..
20V Max* Brushless Motor Helps Provide The Power And Long Run Time In Demanding Applications..
Wireless Tool Control Allows Users To Link Extractor And Tool For Remote Extractor Activation. (Key Fob Sold Separately)..
Optimized For Sds Plus Rotary Hammers While Drilling And Chipping..
Dewalt Dust Extractor Has 45% More Capacity Than Dwh302dh Dust Box To Keep Up With The Demands Of The User..
Features
- High mobility, compact and lightweight OSHA Table 1 Compliant solution. HEPA filter is included in the dust extractor.
- DEWALT dust extractor has 45% more capacity than DWH302DH dust box to keep up with the demands of the user.
- Multiple strap connection points and a belt hook enable the user to position the dust extractor for the best possible ergonomic solution.
- Optimized for SDS plus rotary hammers while drilling and chipping.
- 20V MAX* brushless motor helps provide the power and long run time in demanding applications.
- WIRELESS TOOL CONTROL allows users to link extractor and tool for remote extractor activation. (Key fob sold separately).
- See more on Amazon...
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 10.81 x 12.80 x 4.25 Inches | Weight: 3.66 pounds
See On Amazon #14
DEWALT DWV010 HEPA Dust Extractor with Automatic Filter Cleaning, 8-Gallon
Asin: B00OA02TZ0 | Model: DWV010 | PartNumber: DWV010 | Ean: 8859200018214, 0784497325708, 0885911333535 | UPC: 784497325708, 885911333535
Power Tool Actuation Controls The On/Off Operations Of The Vacuum With A Power Tool.
15 Ft. Anti Static Hose. Hose Diameter-1.25 Inch.
Universal Hose Connector Provides A Secure Connection With Swivel Capability.
Heavy Duty Wheels And Casters Provide Jobsite Durability.
Meets The Epa Lead Related Renovations, Repair And Painting (Rrp) Rule For Hepa Vacuums Only When Dwv9330 Filters Are Used.
15-Amp Motor Of Dewalt Dust Extractor Delivers 150 Cfm Of Airflow.
Features
- Automatic Filter Clean of the dust extractor pulses every 30 seconds for continuous operation without stopping to clean filter
- 15-amp motor of DEWALT dust extractor delivers 150 CFM of airflow
- Power Tool Actuation controls the On/Off operations of the vacuum with a power tool
- Meets the EPA Lead Related Renovations, Repair and Painting (RRP) Rule for Hepa Vacuums only when DWV9330 Filters are used
- Universal hose connector provides a secure connection with swivel capability
- Heavy duty wheels and casters provide jobsite durability
- 15 ft. Anti Static Hose. Hose Diameter-1.25 inch
- See more on Amazon...
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 20.00 x 20.00 x 19.00 inches | Weight: 22.00 Pounds
Warranty: 1 year limited warranty.
See On Amazon #15
Festool 576760 Dust Extractor, Multicolor
Asin: B08PDR92Z5 | Model: 576760 | PartNumber: 576760 | Ean: 4014549377222
Autoclean Automatic Main Filter Cleaning System With Infinitely Adjustable Cleaning Intervals For Consistently High Suction Power.
Osha Table 1 Silica Dust Control Solution For The Applications Outlined As; Iii, Vii, Viii, X, Xi, Xii (Always Check Your Local Guidelines To Ensure The Proper Equipment And Ppe Is Being Used For The Given Application).
Can Be Individually Retrofitted With An Additional Compressed Air Or Bluetooth Module For Remote Control On The Suction Hose Or Automatic Start Via The Bluetooth Battery Pack..
Equipped With Swivelling Castor Wheels And Rear Wheels For Optimum Mobility. It Also Has A Locking Brake That Provides Stability On Any Surface As Well As During Transport. The Flat Filter Fully Integrated In The Suction Head Ensures The Full Volume Is Utilized: This Means That The Gross And Net Container Volumes Are Virtually Identical. The Extremely Compact High-Performance Turbine Provides The Right Suction Power. A 137 Cfm (3900 L/Min) Volume Flow Means That Nothing Remains Except Clean Air..
Features
- No more clogged filters the AUTOCLEAN (AC) automatic main filter cleaning keeps the filter clean and provides a continuously high suction power. The CT 36 AC is designed to be used with the PLANEX and PLANEX easy drywall sanders. With its huge container capacity of 36 l, the CT 36 AC provides maximum volume and a high degree of flexibility.
- Equipped with swivelling castor wheels and rear wheels for optimum mobility. It also has a locking brake that provides stability on any surface as well as during transport. The flat filter fully integrated in the suction head ensures the full volume is utilized: This means that the gross and net container volumes are virtually identical. The extremely compact high-performance turbine provides the right suction power. A 137 CFM (3900 l/min) volume flow means that nothing remains except clean air.
- AUTOCLEAN automatic main filter cleaning system with infinitely adjustable cleaning intervals for consistently high suction power
- Can be individually retrofitted with an additional compressed air or Bluetooth module for remote control on the suction hose or automatic start via the Bluetooth battery pack.
- OSHA Table 1 Silica dust control solution for the applications outlined as; iii, vii, viii, x, xi, xii (always check your local guidelines to ensure the proper equipment and PPE is being used for the given application)
- See more on Amazon...
Brand: Festool | Manufacturer: Festool
Dimensions: 23.40 x 25.00 x 14.40 Inches | Weight: 41.00 pounds
Warranty: 3 year manufacturer.
See On Amazon #16
AlorAir 360 degree Intake Air Filtration System - (1350 CFM) with Strong Vortex Fan, Built-in Ionizer, Shop Dust Collector for Woodworking Shop, Garage Works Shop, Purecare 1350IG
Asin: B0BND3NMKP | Ean: 0739240464180 | UPC: 739240464180
🔹【Strong Vortex Fan】√The Air Filtration System For Woodworking Is Equipped With A Strong Vortex Fan, Which Generates A Strong Airflow When Working, And Maintains A High Static Pressure State Even If The Filter Covers A Large Amount Of Wood Chips. It Has Two-Stage Speed Selection (1050/1350 Cfm). Suitable For Wood Carving Workshop, Woodworking, Garage..
🔹【Kindly Note】It Does Not Meet California's Regular Requirments, It Can Not Be Shipped To California..
🔹【Accessibility】√ Timer Cycle Controller, You Can Set Fan To Shut Down Automatically In 1-9 Hours. √ Ir Remote System, There Is No Wireless Interference, And The Anti-Interference Ability Is Strong. √ With A Hook And Chain, The Shop Dust Collector Is Easy To Move And Can Be Hung From The Ceiling In The Shop Or Placed On A Workbench..
🔹【360 Degree Air Intake Air Filtration System】√The Shop Dust Collector Has A 360 Degree Air Intake Design, Powerful Enough To Cover A Large Area With High Circulating Airflow, Sawdust From Woodworking, Grinding, Sawing, Etc. Improving Your Workplace’S Air Quality. Dimensions: 20.5"Lx 20.5" Wx 9.8"H; Electrical Reguirements: 115V,60 Hz, 1.5 A ; Air Flow: 1050/1350 Cfm; Cover Rooms Up To-1700 Sq.Ft; Noise Rating: 60 To 69 Db.
Features
- Built-In Ionizer ALORAIR air filtration system built-in ionizer, the air passed through is subjected to electric discharge. Pollutantsand odor particles in the drawn-in air are subjected to oxidative degradation and can achieve the effect of dust removal,elimination of odors, and improvement of air quality to promote your health.
- 360 degree air Intake Air Filtration System The Shop Dust Collector has a 360 degree air intake design, powerful enough to cover a large area with high circulating airflow, sawdust from woodworking, grinding, sawing, etc. Improving your workplace s air quality. Dimensions: 20.5Lx 20.5 Wx 9.8H; electrical Reguirements: 115v,60 Hz, 1.5 A ; air flow: 1050/1350 CFM; cover rooms up to-1700 sq.ft; noise rating: 60 to 69 dB
- Strong Vortex fan The Air Filtration System for woodworking is equipped with a strong vortex fan, which generates a strong airflow when working, and maintains a high static pressure state even if the filter covers a large amount of Wood chips. It has two-stage speed selection (1050/1350 CFM). Suitable for wood carving workshop, Woodworking, Garage.
- Accessibility Timer cycle controller, You can set fan to shut down automatically in 1-9 hours. IR remote system, there is no wireless interference, and the anti-interference ability is strong. With a hook and chain, the shop dust collector is easy to move and can be hung from the ceiling in the shop or placed on a workbench.
- Kindly Note It does not meet California's regular requirments, it can not be shipped to California.
- See more on Amazon...
Brand: ALORAIR | Manufacturer: ALORAIR
Dimensions: 9.80 x 20.50 x 20.50 inches | Weight: 27.00 pounds
See On Amazon #17
ABESTORM 360 Degree Intake Air Filtration System Woodworking 1350 CFM Hanging Air Filter with Strong Vortex Fan for Wood Workshop, Garage, Shop Dust Collectors, Up to 1700 sq. ft, DecDust 1350
Asin: B0BPP6DS4W | Model: Dec Dust 1350 | PartNumber: Dec Dust 1350 | Ean: 0751105540310 | UPC: 751105540310
🍃【High Efficiency Merv-11 Air Filter】The 360 Degree Intake Air Filtration System Is Equipped With Merv-11 Filter Which Can Stop 90% Of 3-10Μm Particles And 85% Of 1Μm Particles. Very Suitable For Wood Carving, Grinding, Turning, Circular Saw Work, Powder Mixing, Etc..
🍃【Reliable Quality】Each Abestorm Air Filtration System Are Professionally And Rigorously Tested Before Being Put On The Market. We Confidently Provide Warm Service And Lifetime Technical Support..
🍃【Convenient Controls, Easy To Install】With A Hook And Chain, The Shop Dust Collector Is Easy To Move And Can Be Hung From The Ceiling In The Shop Or Placed On A Workbench. There Are Two Kinds Of Operation Control (Panel Touch And Ir Remote Control), You Can Control The Speed And Timer, The Remote Control Can Let You Control The Air Filter From 27 Feet Away, Ideal For Workshop, Woodworking, Shop, Garage..
🍃【Dimensions And Specifications】Item Size 20.5*20.5*9.8 Inches; Electrical Requirements 115V, 60 Hz, 1.5 A; Air Flow 1050 To 1350 Cubic Feet Per Minute; Cover Rooms Up To 1700 Sq Ft. Noise Rating 60 To 69 Dba; Item Weight 27 Lbs; Merv-11 Filter 13.2*9.5*1.5 Inches..
Features
- 360 degree air filtration system DecDust 1350 workshop dust collector is designed with 360 degree air inlet and equipped with strong vortex fan, which generates strong airflow when working and can remove large amount of dust and wood chips,it has two speed options 1050 or 1350 CFM ideal for wood carving workshop, woodworking sanding, turning, scroll sawing work, powder mixing, etc.
- Dimensions and Specifications Item Size 20.5*20.5*9.8 inches; Electrical Requirements 115V, 60 Hz, 1.5 A; Air flow 1050 to 1350 cubic feet per minute; Cover rooms up to 1700 sq ft. Noise rating 60 to 69 dBA; Item Weight 27 lbs; MERV-11 Filter 13.2*9.5*1.5 inches.
- High Efficiency MERV-11 Air Filter The 360 Degree Intake Air Filtration System is equipped with MERV-11 filter which can stop 90% of 3-10 m particles and 85% of 1 m particles. very suitable for wood carving, grinding, turning, circular saw work, powder mixing, etc.
- Convenient Controls, Easy to Install With a hook and chain, the shop dust collector is easy to move and can be hung from the ceiling in the shop or placed on a workbench. There are two kinds of operation control (panel touch and IR remote control), you can control the speed and timer, the remote control can let you control the air filter from 27 feet away, ideal for workshop, woodworking, shop, garage.
- Reliable Quality Each Abestorm air filtration system are professionally and rigorously tested before being put on the market. We confidently provide warm service and lifetime technical support.
- See more on Amazon...
Brand: Abestorm | Manufacturer: ABESTORM
Weight: 27.00 Pounds
Warranty: 1-Year
See On Amazon #18
Huiliaifei #089038001076 Rear Splash Guard Fits Tile Saw R4040 R4040S Replacement Parts New for Ridgid
Asin: B0D2D1449J | Model: 089038001076 | PartNumber: 089038001076
Easy To Carry And Operate: Small Size, Light, Easy To Carry And Operate, Suitable For Family Use..
After-Sales Service: Choose Brands With Good After-Sales Service, Can Enjoy Better Warranty And Maintenance Services, And Enhance User Experience..
High Durability: Parts Are Usually Made Of High-Quality Materials With Long Service Life And High Return On Investment..
Versatility: Suitable For Different Scenes, Such As Home, Outdoor Space, Etc., With A Wide Range Of Applications..
Features
- 100% quality assurance: meticulous production. It is not an OEM part, but meets the OEM manufacturing requirements. This is the manufacturer's substitute and is functionally equivalent to the previous section.
- Versatility: suitable for different scenes, such as home, outdoor space, etc., with a wide range of applications.
- Easy to carry and operate: small size, light, easy to carry and operate, suitable for family use.
- High durability: parts are usually made of high-quality materials with long service life and high return on investment.
- After-sales service: choose brands with good after-sales service, can enjoy better warranty and maintenance services, and enhance user experience.
- See more on Amazon...
Brand: Huiliaifei | Manufacturer: Huiliaifei
Dimensions: 1.20 x 1.20 x 1.00 Inches
See On Amazon #19
Dust Collection Protection Kit,Angle Grinder Dust Shroud,Dust Shroud Dust Extraction Cutting Guard,Angle Grinder Dust Cover with Brass Valve (120 43MM)
Asin: B0D2CZRTPP | Ean: 8157798288805
[ Safety Protection And Durability ] : During Operation, The Protective Cover Of The Portable Grinder Prevents Sparks And Metal Chips To Protect You From Injury..
[ Quick Installation ] : These Attachments Can Be Set Up Swiftly Without The Need For Any Special Tools Or Intricate Procedures, Saving You Time And Effort..
[ Durable Materials ] : This Cover Is Made Of High Quality Pvc And Copper To Ensure Long Life And Light Weight..
[ Convenient Operation ] : The Integrated Spindle Lock On The Disc Grinder Allows For Faster And Easier Replacement Of Grinding Wheels; Shut-Off Valve For More Control, Convenience And Versatility In All Applications..
Features
- [ Prevent Dust and Debris Splash ] : Say goodbye to flying debris and dusty mess! Our angle grind dust shroud corrals that dust and debris stay right where they belong, keeping your workspace clean and safe. Enjoy a focused and hazard-free work environment with our reliable dust guard.
- [ Convenient Operation ] : The integrated spindle lock on the disc grinder allows for faster and easier replacement of grinding wheels; shut-off valve for more control, convenience and versatility in all applications.
- [ Safety Protection and Durability ] : During operation, the protective cover of the portable grinder prevents sparks and metal chips to protect you from injury.
- [ Durable Materials ] : This cover is made of high quality PVC and copper to ensure long life and light weight.
- [ Quick installation ] : These attachments can be set up swiftly without the need for any special tools or intricate procedures, saving you time and effort.
- See more on Amazon...
Brand: YAWKONT | Manufacturer: YAWKONT
See On Amazon #20
FANJABA Drill Dust Collector Drill Dust Collection Attachment Level 500mAh 360 Degree Rotatable Drilling Dust Collector
Asin: B0D22YQWDF | Ean: 7618950022589
This Drill Dust Collection Is A 360 Degree Rotating Level Instrument,Just Turn The Turntables To Find A Suitable Angle To Measure Provide Additional Benefits Of Ceiling,Leveling,Plumbing And Squaring Applications To Suit Users’ Need..
Suitable For Installing Photo,Door,Window,Furniture Carpentry And Also Suitable For Leveling Tasks Such As Aligning Pictures,Tiling And Flooring Applications,Cabinet And Shelf Installation,Building Requirements..
500Mah Battery,Which Eliminates The Trouble Of Replacing The Battery..
Used For Adversting,Furniture Installation,Line Positioning,Etc..
Features
- This drilling dust collector can not only used as the electric drilling dust collector,also be used as level. Just presses on button for secure adsorption to allow hands measuring,grading,leveling and so on.
- Used for adversting,furniture installation,line positioning,etc.
- This drill dust collection is a 360 degree rotating level instrument,just turn the turntables to find a suitable angle to measure provide additional benefits of ceiling,leveling,plumbing and squaring applications to suit users need.
- 500mAh battery,which eliminates the trouble of replacing the battery.
- Suitable for installing photo,door,window,furniture carpentry and also suitable for leveling tasks such as aligning pictures,tiling and flooring applications,cabinet and shelf installation,building requirements.
- See more on Amazon...
Brand: FANJABA | Manufacturer: FANJABA
See On Amazon #21
Rasamer 14W Dental Lab Dust Collector Built-in Vacuum Cleaner Sand-blasting Protector Box with LED Light JT-69
Asin: B0D1Y9G9VW | Model: RS-JT-69 | PartNumber: RS-JT-69 | Ean: 0091646326012 | UPC: 091646326012
3.The Front End Of The Elbow Support On Both Sides Extends Directly To The Working Area Inside The Cover, Which Is More Ergonomic..
5.Built-In Vacuum Cleaner, Equipped With Exhaust Vents, Powerful Fans, Purification Filters, And Dust Collection Bags.This Dust Cover Integrates Ergonomic Design Aesthetics With Practical Functions Of Technicians..
4.The Silicon Soft Rubber Strip Hanging Curtain Can Effectively Prevent Dust From Floating Outside In The Work..
2.Fine Dust Is Sucked Away During The Work, And Coarser Particles Will Fall Into The Waste Collection Box Below, Which Can Be Taken Out And Cleaned At Any Time..
Features
- 1.It comes with micro-sound vacuuming, and three LED light strips are respectively installed in the front, left and right three-way lighting, which will not produce visual shadow in the work.
- 2.Fine dust is sucked away during the work, and coarser particles will fall into the waste collection box below, which can be taken out and cleaned at any time.
- 3.The front end of the elbow support on both sides extends directly to the working area inside the cover, which is more ergonomic.
- 4.The silicon soft rubber strip hanging curtain can effectively prevent dust from floating outside in the work.
- 5.Built-in vacuum cleaner, equipped with exhaust vents, powerful fans, purification filters, and dust collection bags.This dust cover integrates ergonomic design aesthetics with practical functions of technicians.
- See more on Amazon...
Brand: Rasamer | Manufacturer: Rasamer
See On Amazon #22
YOHOSO 14W LED Dust Box Sandblasting Dust Cover Collector Filter Built-in Vacuum Cleaner for Laboratory
Asin: B0D1TG126Q | Model: YH-JT-69 | PartNumber: YH-JT-69
3.The Front End Of The Elbow Support On Both Sides Extends Directly To The Working Area Inside The Cover, Which Is More Ergonomic..
5.Built-In Vacuum Cleaner,Equipped With Exhaust Vents, Powerful Fans, Purification Filters, And Dust Collection Bags.This Dust Cover Integrates Ergonomic Design Aesthetics With Practical Functions Of Technicians..
4.The Silicon Soft Rubber Strip Hanging Curtain Can Effectively Prevent Dust From Floating Outside In The Work..
2.Fine Dust Is Sucked Away During The Work, And Coarser Particles Will Fall Into The Waste Collection Box Below, Which Can Be Taken Out And Cleaned At Any Time..
Features
- It comes with micro-sound vacuuming, and three LED light strips are respectively installed in the front, left and right three-way lighting, which will not produce visual shadow in the work.
- 2.Fine dust is sucked away during the work, and coarser particles will fall into the waste collection box below, which can be taken out and cleaned at any time.
- 3.The front end of the elbow support on both sides extends directly to the working area inside the cover, which is more ergonomic.
- 4.The silicon soft rubber strip hanging curtain can effectively prevent dust from floating outside in the work.
- 5.Built-in vacuum cleaner,equipped with exhaust vents, powerful fans, purification filters, and dust collection bags.This dust cover integrates ergonomic design aesthetics with practical functions of technicians.
- See more on Amazon...
Brand: YOHOSO | Manufacturer: YOHOSO
See On Amazon #23
Koultona Micro-Sound Three Sides LED Dust Collector Built-in Vacuum Cleaner Vacuum Dust Collector Vacuum Extractor Box with Filters JT-69
Asin: B0D1V4HHCK | Model: Koultona-JT-69 | PartNumber: Koultona-JT-69 | Ean: 0091646326692 | UPC: 091646326692
The Front End Of The Elbow Support On Both Sides Extends Directly To The Working Area Inside The Cover, Which Is More Ergonomic..
Built-In Vacuum Cleaner,Equipped With Exhaust Vents, Powerful Fans, Purification Filters, And Dust Collection Bags.This Dust Cover Integrates Ergonomic Design Aesthetics With Practical Functions Of Technicians..
The Silicon Soft Rubber Strip Hanging Curtain Can Effectively Prevent Dust From Floating Outside In The Work..
Fine Dust Is Sucked Away During The Work, And Coarser Particles Will Fall Into The Waste Collection Box Below, Which Can Be Taken Out And Cleaned At Any Time..
Features
- It comes three LED light strips are respectively installed in the front, left and right three-way lighting, which will not produce visual shadow in the work.
- Fine dust is sucked away during the work, and coarser particles will fall into the waste collection box below, which can be taken out and cleaned at any time.
- The front end of the elbow support on both sides extends directly to the working area inside the cover, which is more ergonomic.
- The silicon soft rubber strip hanging curtain can effectively prevent dust from floating outside in the work.
- Built-in vacuum cleaner,equipped with exhaust vents, powerful fans, purification filters, and dust collection bags.This dust cover integrates ergonomic design aesthetics with practical functions of technicians.
- See more on Amazon...
Brand: Koultona | Manufacturer: Koultona
See On Amazon #24
Mabta 5 Pieces/set Dust Collector Dust Cover Drilling Household Decoration Dust Drill Connecting Bowl Electric Hammer Dust Bowl For Adults Woodworking Drilling Accessories Dust Collection Attachment
Asin: B0D1KKCN3Q | Ean: 7619270056537
Hands-Free Use: The Tool Is Abs, This Allows The Tool To Use Efficiently To Many Surfaces, Leaving Your Hands Free To Control The Drill..
Easy To Install: Electric Hammer Dust Cover Threaded Foreasy Removal Of The Insert Bearing, Tight Connection, Andsimple Installation..
Stable Without Wobbling: The Built-In High-Speed Spindleensures Is Stable, And The Dust Cover Does Not Turn During.
Fit Almost Any Surfaces: It Will To Laminated Surfaces, Metal, Plastic, Plastered And Painted Concrete, Celcon Blocks, Bricks, And Even Work On Ceilings..
Features
- Works with All Drill Types: Hands-free Dust Collector effectively works with Bits, Bits, High-Speed Steel Bits, Tile Drills, Masonry Bits, Hole and even Auger Bits.
- Fit Almost Any Surfaces: It will to laminated surfaces, metal, plastic, plastered and painted concrete, Celcon blocks, bricks, and even work on ceilings.
- Hands-Free Use: The tool is ABS, this allows the tool to use efficiently to many surfaces, leaving your hands free to control the drill.
- Stable Without Wobbling: The built-in high-speed spindleensures is stable, and the dust cover does not turn during
- Easy To Install: Electric hammer dust cover threaded foreasy removal of the insert bearing, tight connection, andsimple installation.
- See more on Amazon...
Brand: Mabta | Manufacturer: Mabta
See On Amazon #25
Dust-proof Connecting Bowl Dust Removal Connector Electric Hammer Dust Cover Stable Without Wobbling Fit Surfaces Portable Dust Collector Accessories For Woodworking Drilling Accessories Dust Dust
Asin: B0D1KF1QQV | Ean: 7623030098415
Hands-Free Use: The Tool Is Abs, This Allows The Tool To Use Efficiently To Many Surfaces, Leaving Your Hands Free To Control The Drill..
Fit Almost Any Surfaces: It Will To Laminated Surfaces, Metal, Plastic, Plastered And Painted Concrete, Celcon Blocks, Bricks, And Even Work On Ceilings..
Stable Without Wobbling: The Built-In High-Speed Spindleensures Is Stable, And The Dust Cover Does Not Turn During.
Works With All Drill Types: Hands-Free Dust Collector Effectively Works With Bits, Bits, High-Speed Steel Bits, Tile Drills, Masonry Bits, Hole And Even Auger Bits..
Features
- Easy To Install: Electric hammer dust cover threaded foreasy removal of the insert bearing, tight connection, andsimple installation.
- Works with All Drill Types: Hands-free Dust Collector effectively works with Bits, Bits, High-Speed Steel Bits, Tile Drills, Masonry Bits, Hole and even Auger Bits.
- Hands-Free Use: The tool is ABS, this allows the tool to use efficiently to many surfaces, leaving your hands free to control the drill.
- Stable Without Wobbling: The built-in high-speed spindleensures is stable, and the dust cover does not turn during
- Fit Almost Any Surfaces: It will to laminated surfaces, metal, plastic, plastered and painted concrete, Celcon blocks, bricks, and even work on ceilings.
- See more on Amazon...
Brand: Saddgo | Manufacturer: Saddgo
See On Amazon #26
Large Capacity Dust Collector Bag Adjustable Sealing Design for Rowenta Vacuum Cleaner ZR200540 ZR200720
Asin: B0D1LG167G | Model: Hztyyierp6b2me8hc1 | PartNumber: Hztyyierp6b2me8hc1
Premium Material: The Dust Collector Bag Is Crafted From Non-Woven Fabrics, Ensuring Exceptional Durability And Resistance To Tears. It Efficiently Holds Trash And Dirt Without Easily Breaking, Providing Long-Lasting Use..
Exceptional Sealing Function: Engineered With A Reliable Sealing Function, This Bag Prevents Leakage Of Garbage And Dust. Maintain A , Tidy, And Hygienic Work Environment Effortlessly With This Essential Accessory..
Large Capacity Design: Featuring A Spacious Design, This Bag Can Accommodate More Trash, Decreasing The Need For Frequent Replacements. Save Time And Energy With This Efficient Solution That Makes Tasks Easier..
Easy To Replace: Designed For Quick And Hassle- Installation And Removal, This Dust Bag Accessory Requires No Extra Tools,Save Time And Effort With A Simple Operation That Streamlines Your Process..
Features
- High Compatibility: Specifically compatible with rowenta zr200540 zr200720 and various vacuum cleaner models, including ro64xx, ro63xx, ro68xx, and ro39x, ensure optimal performance every time with this precisely engineered dust bag.
- Easy to Replace: Designed for quick and hassle- installation and removal, this dust bag accessory requires no extra tools,save time and effort with a simple operation that streamlines your process.
- Premium Material: The dust collector bag is crafted from non-woven fabrics, ensuring exceptional durability and resistance to tears. it efficiently holds trash and dirt without easily breaking, providing long-lasting use.
- Large Capacity Design: Featuring a spacious design, this bag can accommodate more trash, decreasing the need for frequent replacements. save time and energy with this efficient solution that makes tasks easier.
- Exceptional Sealing Function: Engineered with a reliable sealing function, this bag prevents leakage of garbage and dust. maintain a , tidy, and hygienic work environment effortlessly with this essential accessory.
- See more on Amazon...
Brand: Hztyyier | Manufacturer: Hztyyier
Dimensions: 1.97 x 11.81 x 7.87 Inches
Warranty: Manufacturer warranty for 90 day
See On Amazon #27
Festool 574930 CT 26 E HEPA Dust Extractor
Asin: B07BB5MGR4 | Model: 574930 | PartNumber: 574930 | Ean: 4014549282885
Economical Because Of The Optimal Use Of The Available Volume With A Selfclean Filter Bag In The Container.
Can Be Individually Retrofitted With An Additional Compressed Air Or Bluetooth Module For Remote Control On The Suction Hose Or Automatic Start Via The Bluetooth Battery Pack.Anti-Static 11-1/2 Foot Hose.
Maximum Utilization Of The Container Volume – The Gross Volume Is The Same As The Net Volume.
Smooth Suction Hose And Optimized Sys-Dock With Cord Holder And T-Loc Function For Conveniently Connecting Systainer To The Mobile Dust Extractor.
Features
- Constantly high suction because of the compact high performance turbine
- Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting Systainer to the mobile dust extractor
- Economical because of the optimal use of the available volume with a selfclean filter bag in the container
- Maximum utilization of the container volume the gross volume is the same as the Net volume
- Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.Anti-static 11-1/2 foot hose
- See more on Amazon...
Brand: Festool | Manufacturer: Festool
Dimensions: 26.38 x 23.62 x 15.75 inches | Weight: 37.00 Pounds
Warranty: 3 years, festool service.
See On Amazon #28
Festool 574938 CT 48 E HEPA Dust Extractor
Asin: B07BBZ1H78 | Model: 574938 | PartNumber: 574938 | Ean: 4014549305621
Economical Because Of The Optimal Use Of The Available Volume With A Selfclean Filter Bag In The Container.
Can Be Individually Retrofitted With An Additional Compressed Air Or Bluetooth Module For Remote Control On The Suction Hose Or Automatic Start Via The Bluetooth Battery Pack..
Maximum Utilization Of The Container Volume – The Gross Volume Is The Same As The Net Volume.
Smooth Suction Hose And Optimized Sys-Dock With Cord Holder And T-Loc Function For Conveniently Connecting Systainer To The Mobile Dust Extractor.
Features
- Constantly high suction because of the compact high performance turbine
- Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting Systainer to the mobile dust extractor
- Economical because of the optimal use of the available volume with a selfclean filter bag in the container
- Maximum utilization of the container volume the gross volume is the same as the Net volume
- Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.
- See more on Amazon...
Brand: Festool | Manufacturer: Festool
Dimensions: 29.13 x 38.58 x 16.34 Inches | Weight: 55.12 pounds
Warranty: 3 Years, Festool Service
See On Amazon #29
MAKITA DX06 DUST Extraction System,199563-2
Asin: B084KQDWS3 | Model: 199563-2 | PartNumber: 199563-2 | Ean: 0088381540346 | UPC: 088381540346
Transparent Dust Case.
Depth Gauge.Large Dust Box Cover With Button Opening For Easy Emptying.Slide Adjustment For Different Size Drill Bits.Slides On The Dhr242 And Automatically Operates When The Drill Is Turned On.Hepa Filter Traps Particles With An Efficiency Rating Of 99.75 Per Cent.
Filter Cleaning Mechanism; Dust Filter Cleaning Dial Removes Excess Dust From The Filter To Maintain Vacuum Efficiency And Performance.
One Touch Easy Installation And Removal.
Features
- Dust extraction system suitable for Makita DHR242
- One touch easy installation and removal
- Transparent dust case
- Filter cleaning mechanism; dust filter cleaning dial removes excess dust from the filter to maintain vacuum efficiency and performance
- Depth gauge.Large dust box cover with button opening for easy emptying.Slide adjustment for different size drill bits.Slides on the DHR242 and automatically operates when the drill is turned on.HEPA filter traps particles with an efficiency rating of 99.75 per cent
- See more on Amazon...
Brand: Makita | Manufacturer: Makita
Dimensions: 0.16 x 0.16 x 0.16 inches | Weight: 2.20 Pounds
See On Amazon #30
Peachtree Woodworking Supply 4-Inch Cyclone Dust Collection Elbows and Couplers Separator Kit for Woodworking Debris Containers, Buckets and Barrels
Asin: B071CL5MJN | Model: 530 | PartNumber: 530 | Ean: 0814310014066 | UPC: 814310014066
The Working Theory Behind Cyclone Separators Is That The Heavier Wood Chips Fall To The Bottom Of The Container While The Lighter Dust Particles Get Pulled In The Out Feed Port And Into Your Dust Collector Or Vacuum. This Keeps The Large Debris From Slamming Into Your Dust Collector’S Impeller Or Filling Up Your Shop Vacuums Container To Quickly. This Also Helps Prevents Any Unnecessary Damage To Dust Collector Impellers..
The 4” Separator Cyclone Kit Comes With 2 Ea. 4" Ports (For Top Side Of Separator) 2 Ea. 4" In Feed Elbow Ports (For Bottom Side Of Separator) 1 Ea. Hardware Pack And 2 Ea. Easy To Secure 4" Turn Key Hose Clamps. Hose, Barrel Or Container Are Required For This Kit To Properly Work. Hose, Barrel Or Container Are Not Included..
Another Advantage To Using Cyclone Style Separators Is That Your Bottom Bag On Dust Collector Machines Or Shop Vacuum Containers Won’T Fill Up Nearly As Quick Than They Would Without A Cyclone Style Separator. This Means You Can Use The Cyclone Separator With Your Planer, Jointer Or Router Tables Without Having To Empty The Bag Or Vacuum Containers Nearly As Often..
This Cyclone Kit Will Help Protect Your Dust Collector From Unnecessary Wear And Tear. Once Installed On A Barrel, Box, Or Any Container (Barrel Or Box Not Included), This Dust And Debris Separator Keeps The Larger, Heavier Chips Coming From You Machinery From Getting Into Your Dust Collector Impeller. This Will Ad Years To The Life Of Your Dust Collector And Help Keep Your Bag Emptying Chores To A Minimum..
Features
- There s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4 Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop.
- This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum.
- The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers.
- Another advantage to using cyclone style separators is that your bottom bag on dust collector machines or shop vacuum containers won t fill up nearly as quick than they would without a cyclone style separator. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers nearly as often.
- The 4 Separator Cyclone kit comes with 2 ea. 4 Ports (for top side of separator) 2 ea. 4 in feed elbow ports (for bottom side of separator) 1 ea. hardware pack and 2 ea. easy to secure 4 turn key hose clamps. Hose, barrel or container are required for this kit to properly work. Hose, barrel or container are NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.54 Pounds
See On Amazon
Looking For Something Else?
Search