Best countersinks - Buying Guide
Last Updated: 04/19/2024
Share on
Bestselling countersinks on Amazon
- KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Roun...
- Drill America - DEWSFC1/2-82 1/2"-82 High Speed Steel Single Flute Countersink, Dew Series, Uncoated...
- KEO 53128-01 Single Flute Countersink, High Speed Steel, 82 Degree Cutting Angle, 1/2" Body Diameter
- Drill America DEWCHAT3/8-90 3/8"-90 High Speed Steel 6 Flute Chatterless Countersink, Dew Series
- Accusize Industrial Tools 9 Pc Single Flute H.S.S. Countersink Set, 82 Degrees, Ground, 0245-1029
- KEO 53532 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 100 Degree Point Angle, Rou...
- F&D Tool Company 26404-X110 Single Flute Countersinks, High Speed Steel, 100 Degrees, 1/4" Diameter
- HHIP 2001-2000 1 Inch 82 Degree 3 Flute HSS Countersink
- KEO 55051 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Poi...
- KEO 55531 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point A...
#1
KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
Asin: B00947BQ08 | Model: 53512 | PartNumber: 53512 | Ean: 0792971918766, 9145312036956, 5448095729591, 0746767308071 | UPC: 792971918766, 746767308071
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.50 x 3.00 x 0.50 inches | Weight: 0.00 Pounds
See On Amazon #2
Drill America - DEWSFC1/2-82 1/2"-82 High Speed Steel Single Flute Countersink, Dew Series, Uncoated (Bright)
Asin: B00FXCSCDC | Model: DEWSFC1/2-82 | PartNumber: DEWSFC1/2-82 | Ean: 0887861130820 | UPC: 887861130820
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
They Provide A Smooth Finish On A Variety Of Materials.
Through-Hole Flute Style Has A Single Flute That Passes Through The Cutting Head To Reduce Vibration And Chip Clogging; Also Called "Zero Flute".
Single Flute Countersinks Are Ideal For Chambering, Deburring, And Countersinking.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Single flute countersinks are ideal for chambering, deburring, and countersinking
- Round shanks allow use with a wide variety of toolholding systems
- Through-hole flute style has a single flute that passes through the cutting head to reduce vibration and chip clogging; also called zero flute
- They provide a smooth finish on a variety of materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #3
KEO 53128-01 Single Flute Countersink, High Speed Steel, 82 Degree Cutting Angle, 1/2" Body Diameter
Asin: B00KTTQAYM | Model: 53128-01 | PartNumber: 53128-01
Single Flute Countersinks.
Unit Count: 1.0.
The Large Positive Rake And Single Flute Construction Provides A Smooth Surface Finish On A Wide Variety Of Materials.
Features
- The versatility of this tool should increase productivity on all general purpose applications
- The large positive rake and single flute construction provides a smooth surface finish on a wide variety of materials
- Single flute countersinks
- Unit count: 1.0
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.50 x 2.10 x 0.50 inches | Weight: 0.00 pounds
See On Amazon #4
Drill America DEWCHAT3/8-90 3/8"-90 High Speed Steel 6 Flute Chatterless Countersink, Dew Series
Asin: B00FXBSVHU | Model: DEWCHAT3/8-90 | PartNumber: DEWCHAT3/8-90 | Ean: 0887861132060 | UPC: 887861132060
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed To Provide More Metal Removal Then The 1,2,3, And 4 Flute Countersink.
Through-Hole Flute Style Has A Single Flute That Passes Through The Cutting Head To Reduce Vibration And Chip Clogging; Also Called "Zero Flute".
6 Flute Chatterless Countersink.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- 6 flute chatterless countersink
- Round shanks allow use with a wide variety of toolholding systems
- Through-hole flute style has a single flute that passes through the cutting head to reduce vibration and chip clogging; also called zero flute
- Designed to provide more metal removal then the 1,2,3, and 4 flute countersink
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 0.00 pounds
See On Amazon #5
Accusize Industrial Tools 9 Pc Single Flute H.S.S. Countersink Set, 82 Degrees, Ground, 0245-1029
Asin: B01AIREE6A | Model: 0245-1029 | PartNumber: 0245-1029 | Ean: 0641799799234 | UPC: 641799799234
Made Of H.S.S. And Precision Ground.
Optimal Performance And Finish Quality Achieved At Lower Cutting Speeds To Extend Tool Life..
Precision Ground At An 82° Angle, Perfect For Burr-Free Deburring And Countersinking..
Using Coolant When Machining Cast Iron Improves Tool Life And Maintains Efficiency..
Fitted Case.
Set Includes 9 H.S.S. Single Flute Countersinks, Sizes From 3/16" To 1", For Diverse Applications..
82 Degree.
Designed For Surface-Level Work, These Countersinks Are Not Intended For Deep Drilling..
One Each Of: 3/16'', 1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8'' & 1''.
Features
- 9 PCS Set
- One each of: 3/16'', 1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8'' & 1''
- Made of H.S.S. and precision ground
- 82 degree
- Fitted case
- Set includes 9 H.S.S. single flute countersinks, sizes from 3/16 to 1, for diverse applications.
- Precision ground at an 82 angle, perfect for burr-free deburring and countersinking.
- Using coolant when machining cast iron improves tool life and maintains efficiency.
- Designed for surface-level work, these countersinks are not intended for deep drilling.
- Optimal performance and finish quality achieved at lower cutting speeds to extend tool life.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 9.45 x 3.54 inches
See On Amazon #6
KEO 53532 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 100 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
Asin: B00947CG0C | Model: 53532 | PartNumber: 53532
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
100 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 100 degree angle
- See more on Amazon...
First Available: 05/15/2017
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.02 pounds
See On Amazon #7
F&D Tool Company 26404-X110 Single Flute Countersinks, High Speed Steel, 100 Degrees, 1/4" Diameter
Asin: B00IE8WESQ | Model: 26404-X110 | PartNumber: 26404-X110
These Single Flute Countersinks Are Manufactured With Angular Relief For Countersink Purposes.
Made In Usa.
100 Degrees - Diameter: 1/4.
Features
- Single Flute Countersink
- 100 Degrees - Diameter: 1/4
- These single flute countersinks are manufactured with angular relief for countersink purposes
- Made in USA
- See more on Amazon...
Brand: F&D Tool Company | Manufacturer: F&D Tool Company
See On Amazon #8
HHIP 2001-2000 1 Inch 82 Degree 3 Flute HSS Countersink
Asin: B00N408Z4G | Model: 2001-2000 | PartNumber: 2001-2000 | Ean: 0769053005133 | UPC: 769053005133
Utilized In Countersinking Screw And Rivet Heads And For Centering Lathe Work.
3-Flute Eliminates Chatter In Most Applications, While Providing Better Accuracy Than A Single Flute Countersink.; High Speed Steel.
Length Approx. 3-1/2.
Features
- Cutter Diameter (Inch) 1; Shank Diameter 1/2
- Length Approx. 3-1/2
- Utilized in countersinking screw and rivet heads and for centering lathe work
- 3-Flute eliminates chatter in most applications, while providing better accuracy than a single flute countersink.; High speed steel
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 6.00 x 3.00 x 1.00 inches | Weight: 0.25 pounds
See On Amazon #9
KEO 55051 High-Speed Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter
Asin: B00947DAB6 | Model: 55051 | PartNumber: 55051 | Ean: 0735329550515 | UPC: 735329550515
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 3.00 x 1.20 x 1.20 Inches | Weight: 0.10 Pounds
See On Amazon #10
KEO 55531 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/2" Shank Diameter, 1" Body Diameter
Asin: B00947MJ9K | Model: 55531 | PartNumber: 55531
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.35 pounds
See On Amazon #11
KEO 53518 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 82 Degree Point Angle, 5/16" - 5/8" Head Diameter
Asin: B00947BWDO | Model: 53518 | PartNumber: 53518
82 Degree Angle.
Made In Great Britain.
Straight Shank, Cnc Precision Cam Ground, M35 Cobalt, Chatter-Free Cutting Action.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- 82 degree angle
- Straight shank, CNC precision cam ground, M35 cobalt, chatter-free cutting action
- Made in Great Britain
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.00 Pounds
See On Amazon #12
KEO 53513 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter
Asin: B00947BR7A | Model: 53513 | PartNumber: 53513 | Ean: 0370121674221 | UPC: 370121674221
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 0.02 pounds
See On Amazon #13
KEO 53129-01 Single Flute Countersink, High Speed Steel, 90 Degree Cutting Angle, 1/2" Body Diameter
Asin: B00KTTQB82 | Model: 53129-01 | PartNumber: 53129-01
Single Flute Countersinks.
Unit Count: 1.0.
The Large Positive Rake And Single Flute Construction Provides A Smooth Surface Finish On A Wide Variety Of Materials.
Features
- The versatility of this tool should increase productivity on all general purpose applications
- The large positive rake and single flute construction provides a smooth surface finish on a wide variety of materials
- Single flute countersinks
- Unit count: 1.0
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.50 x 5.50 x 1.70 inches | Weight: 0.00 pounds
See On Amazon #14
KEO 55817 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 100 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 1/2" Body Diameter
Asin: B00947XZ0C | Model: 55817 | PartNumber: 55817
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
100 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 100 degree angle
- See more on Amazon...
First Available: 11/25/2017
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.10 Pounds
See On Amazon #15
HHIP 2001-0750 3/4 Inch Single Flute 82 Degree HSS Countersink
Asin: B00N408HPI | Model: 2001-0750 | PartNumber: 2001-0750 | Ean: 0769053005065 | UPC: 769053005065
Single Flute For Clean And Precise Cutting, Suitable For Deburring And Chamfering. The Design Allows For Countersinking Smaller Holes Compared To Multi-Flute Tools & Aids In Efficient Chip Evacuation During Cutting..
Ideal For Various Materials, Including Metals, Wood, And Plastics. Suitable For Professional Machining Applications And Diy Projects. Available In A Variety Of Sizes To Accommodate Different Hole Dimensions..
Available In 60° 82° & 90° - 60° Enables Quick Chamfering, Ideal For Softer Materials. 82° Offers Balanced Performance Across A Wide Range Of Materials. 90° Provides A Stronger Chamfer, Suitable For Harder Materials.
These Hhip Hss Single Flute Countersinks And Sets Offer Versatility, Efficiency, And Durability, Making Them Especially Suitable For Portable Machine Work And Applications Involving Smaller Holes..
Features
- Tip size is 1/8". Diameter of shank is 1/2". Overall length is 2-3/4"
- These HHIP HSS single flute countersinks and sets offer versatility, efficiency, and durability, making them especially suitable for portable machine work and applications involving smaller holes.
- Single flute for clean and precise cutting, suitable for deburring and chamfering. The design allows for countersinking smaller holes compared to multi-flute tools & aids in efficient chip evacuation during cutting.
- Available in 60 82 & 90 - 60 enables quick chamfering, ideal for softer materials. 82 offers balanced performance across a wide range of materials. 90 provides a stronger chamfer, suitable for harder materials
- Ideal for various materials, including metals, wood, and plastics. Suitable for professional machining applications and DIY projects. Available in a variety of sizes to accommodate different hole dimensions.
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 6.00 x 3.00 x 1.00 inches | Weight: 0.20 pounds
See On Amazon #16
Accusize Industrial Tools 1'' Diameter Rota Cutter Countersink, Hss Countersink for Rota-Cutter, 3/4'' Weldon Shank, Ce00-0001
Asin: B07KPLD6JW | Model: CE00-0001 | PartNumber: CE00-0001 | Ean: 0637665777482, 0663566022352 | UPC: 663566022352, 637665777482
High-Speed Steel Construction: Made Of Industrial-Quality High-Speed Steel (Hss) For Superior Wear Resistance, Suitable For Both Ferrous And Nonferrous Materials..
Optimized Dimensions: Offers A Cutter Diameter (D) Of 1", A Pilot Hole Diameter (D1) Of 3/16", A Shank (B) Of 3/4", An Overall Length (L) Of 1-3/4", And An Angle Of 90° With A Ratio Of 45 Per Side..
Efficient Performance: Designed To Enhance Efficiency In Deburring And Chamfering Pre-Drilled Holes, Promoting Clean And Precise Finishes..
Precision Metalworking: Engineered For A 45° Per Side, 90° Included Angle, Ideal For Accurate Countersinking, Chamfering, And Deburring Operations..
Features
- Universal Shank Design: Features a standard 3/4'' (19.05mm) Weldon shank, ensuring compatibility with most magnetic drilling machines and relevant drill press attachments.
- Precision Metalworking: Engineered for a 45 per side, 90 included angle, ideal for accurate countersinking, chamfering, and deburring operations.
- High-Speed Steel Construction: Made of industrial-quality High-Speed Steel (HSS) for superior wear resistance, suitable for both ferrous and nonferrous materials.
- Efficient Performance: Designed to enhance efficiency in deburring and chamfering pre-drilled holes, promoting clean and precise finishes.
- Optimized Dimensions: Offers a cutter diameter (D) of 1, a pilot hole diameter (d1) of 3/16, a shank (b) of 3/4, an overall length (L) of 1-3/4, and an angle of 90 with a ratio of 45 per side.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 6.50 x 3.00 x 3.00 inches | Weight: 0.05 Kilograms
See On Amazon #17
KEO 53523 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 90 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter
Asin: B00947C210 | Model: 53523 | PartNumber: 53523
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
First Available: 11/25/2017
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.70 x 2.20 x 0.90 inches | Weight: 0.10 pounds
See On Amazon #18
KEO 55814 Solid Carbide Single-End Countersink, TiALN Coated, 6 Flutes, 100 Degree Point Angle, Round Shank, 3/16" Shank Diameter, 3/16" Body Diameter
Asin: B00948VFQ2 | Model: 55814-TiALN | PartNumber: 55814-TiALN
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
100 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Aluminum Nitride Coatings Become Self-Lubricating When Used At Very High Speeds, Making Them Ideal For Cutting Without Coolant ("Dry Machining").
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (dry machining)
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 100 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.04 pounds
See On Amazon #19
F&D Tool Company 26414-X114 Single Flute Countersinks, High Speed Steel, 100 Degrees, 1/2" Diameter
Asin: B00IE8WOOA | Model: 26414-X114 | PartNumber: 26414-X114
These Single Flute Countersinks Are Manufactured With Angular Relief For Countersink Purposes.
Made In Usa.
100 Degrees - Diameter: 1/2.
Features
- Single Flute Countersink
- 100 Degrees - Diameter: 1/2
- These single flute countersinks are manufactured with angular relief for countersink purposes
- Made in USA
- See more on Amazon...
Brand: F&D Tool Company | Manufacturer: F&D Tool Company
See On Amazon #20
KEO 53514 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 3/4" Body Diameter
Asin: B00947BSQ0 | Model: 53514 | PartNumber: 53514
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 2.50 x 0.90 x 0.90 Inches | Weight: 0.05 Pounds
See On Amazon #21
KEO 53515 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 1" Body Diameter
Asin: B00947BU22 | Model: 53515 | PartNumber: 53515
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
See On Amazon #22
Accusize Industrial Tools 60 Degree 6 Flute H.S.S. Machine Countersink, 8 Pcs, Precision Ground, 0206-0010
Asin: B01AIK8QES | Model: 0206-0010 | PartNumber: 0206-0010 | Ean: 0641799798152 | UPC: 641799798152
One Of Each: 1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8'' & 1''.
Optimized For Clean Finishes: Ideal For Achieving Burr- And Chatter-Free Deburring And Countersinking, Ensuring Smooth, Precise Finishes..
Enhanced Tool Life With Coolant: Use Of Coolant During Machining Recommended To Significantly Improve Tool Life, Especially In Cast Iron..
Complete Set For Precision Work: Includes 8 H.S.S. Countersinks (1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", & 1"), Designed For Versatile Countersinking Tasks..
Durable High-Speed Steel: Made From High-Speed Steel, Precision Ground For Superior Durability And Performance In Demanding Environments..
Made Of H.S.S. And Precision Ground.
60° Angle For Specific Applications: Specifically Designed With A 60° Countersink Angle, Perfect For Tasks Requiring This Unique Angle..
8 Pcs/Set.
Features
- Angle: 60
- 8 Pcs/set
- One of each: 1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8'' & 1''
- Made of H.S.S. and precision ground
- Complete Set for Precision Work: Includes 8 H.S.S. countersinks (1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, & 1), designed for versatile countersinking tasks.
- Durable High-Speed Steel: Made from high-speed steel, precision ground for superior durability and performance in demanding environments.
- Optimized for Clean Finishes: Ideal for achieving burr- and chatter-free deburring and countersinking, ensuring smooth, precise finishes.
- Enhanced Tool Life with Coolant: Use of coolant during machining recommended to significantly improve tool life, especially in cast iron.
- 60 Angle for Specific Applications: Specifically designed with a 60 countersink angle, perfect for tasks requiring this unique angle.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 8.27 inches
See On Amazon #23
KEO 55533 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 3/4" Shank Diameter, 1-1/2" Body Diameter
Asin: B00947MNRI | Model: 55533 | PartNumber: 55533
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 3.10 x 1.80 x 1.60 inches | Weight: 0.00 pounds
See On Amazon #24
KEO 53524 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 90 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 3/4" Body Diameter
Asin: B00947C3Y6 | Model: 53524 | PartNumber: 53524
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.10 Pounds
See On Amazon #25
HHIP 5000-3125 60 Degree M42 8% Cobalt Combined Drill and Countersink, 1/8" Drill Diameter, 5/16" Body Diameter, 2-1/8" OAL, 4
Asin: B00DVTL8SA | Model: 5000-3125 | PartNumber: 5000-3125 | Ean: 0769053052403 | UPC: 769053052403
Ground From Solid.
60 Degree Countersink Angle Fits All Standard Centers.
Used For Centering Work Ends Where The Work Piece Is To Be Revolved On Machine Centers.
Plain Style.
Features
- Made of M42 steel for longer tool life
- Plain style
- Ground from solid
- Used for centering work ends where the work piece is to be revolved on machine centers
- 60 Degree countersink angle fits all standard centers
- See more on Amazon...
Brand: HHIP | Manufacturer: ABS Import Tools, Inc.
Dimensions: 0.50 x 0.50 x 4.00 inches
See On Amazon #26
KEO 53511 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 3/8" Body Diameter
Asin: B00947BOYQ | Model: 53511 | PartNumber: 53511
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 0.40 x 1.80 x 0.40 inches | Weight: 0.11 Pounds
See On Amazon #27
KEO 53530 Cobalt Steel Single-End Countersink, TiN Coated, 100 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 5/16" Body Diameter
Asin: B00948QTWM | Model: 53530-TiN | PartNumber: 53530-TiN
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
100 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 100 degree angle
- See more on Amazon...
First Available: 05/15/2017
Brand: KEO Cutters | Manufacturer: KEO Cutters
Weight: 0.00 Pounds
See On Amazon #28
ANKROYU 5PCS Countersink End Mill Cutter Slot Drill Bits Tool, Cutter Drill Milling Bits, Milling Bits Metal Countersink Drill Bit Set M3 M8 4 Hss-Al
Asin: B0CYBZ11JT
【Performance】Experience Unparalleled Toughness, Abrasion Resistance, And High-Speed Cutting, Making Our Mill Cutters Perfect For Machining High-Hardness Materials. Achieve Results In Your Machining Endeavors With Ease.
【Enhanced Efficiency】Reduce Tool Changeovers And Improve Machine Actuator Movement Efficiency With Our Mill Cutters. Maximize Productivity And Save Valuable Mold-Making Time, Allowing You To On What Matters Most—Achieving Quality In Your Machining Projects.
【Multi-Purpose Functionality】Whether It's Direct Processing Or Fine-Tuning Heat Treatment Molds, Our Mill Cutters Are Up To The Task. Enjoy The Convenience Of Versatile Tooling That Adapts To Your Machining Needs Effortlessly.
【Versatile Material Compatibility】Our Mill Cutters Are Ideal For A Wide Range Of Materials Including Copper, Aluminum, Steel, And Cast Iron. Enjoy The Flexibility To Tackle Various Machining Projects With Ease And Confidence.
Features
- Premium Milling Cutters Elevate your machining capabilities with our premium mill cutters, crafted from tough high-speed steel, specifically designed for assembly on milling machines. Experience efficiency in every cut
- Versatile Material Compatibility Our mill cutters are ideal for a wide range of materials including copper, aluminum, steel, and cast iron. Enjoy the flexibility to tackle various machining projects with ease and confidence
- Performance Experience unparalleled toughness, abrasion resistance, and high-speed cutting, making our mill cutters perfect for machining high-hardness materials. Achieve results in your machining endeavors with ease
- Multi-purpose Functionality Whether it's direct processing or fine-tuning heat treatment molds, our mill cutters are up to the task. Enjoy the convenience of versatile tooling that adapts to your machining needs effortlessly
- Enhanced Efficiency Reduce tool changeovers and improve machine actuator movement efficiency with our mill cutters. Maximize productivity and save valuable mold-making time, allowing you to on what matters most achieving quality in your machining projects
- See more on Amazon...
Brand: ANKROYU | Manufacturer: ANKROYU
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.26 pounds
See On Amazon #29
KEO 53522 Cobalt Steel Single-End Countersink, TiN Coated, 90 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
Asin: B00948QQNE | Model: 53522-TiN | PartNumber: 53522-TiN
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
90 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 90 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 2.50 x 0.70 x 0.60 inches | Weight: 0.05 pounds
See On Amazon #30
KEO 53510 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 1/4" Shank Diameter, 5/16" Body Diameter
Asin: B00948QLGG | Model: 53510-TiN | PartNumber: 53510-TiN | Ean: 0789957162541 | UPC: 789957162541
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
82 Degree Angle.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 82 degree angle
- See more on Amazon...
Brand: KEO Cutters | Manufacturer: KEO Cutters
Dimensions: 2.50 x 0.70 x 0.70 Inches | Weight: 0.01 pounds
See On Amazon
Looking For Something Else?
Search